If a microhydro dam generates 1 mw of power, how much energy will it produce annually?.

Answers

Answer 1

8.76 MUs of energy will be produced yearly by the micro-hydro dam.

What is a dam?

A dam is a physical obstruction that slows or restricts the flow of subsurface or seawater. Dam-created reservoirs offer freshwater for uses.

Taking into account that the micro-hydro dam produces 1 MW of power

To estimate how much energy this will yearly generate.

There is one unit of electricity per kwh ( kW hours)

A 1000 KW plant becomes a 1 MW plant.

The quantity of toward the in a day when a plant runs continuously at maximum capacity is:

24000 Kwh, approximately 24000 units, is equal to 1000 KW multiplied by 24 hours. Units made during a specific year.

When 1000 KW is multiplied by 24 hours and 365 days, the result is 8,760,000 Kwh, or 8.76 Million Units (MUs).

The micro-hydro dam will generate 8.76 MUs of energy every year.

Learn more about dam, here:

https://brainly.com/question/29483452

#SPJ1


Related Questions

14. Current flow between the main terminals of a triac is
a. In one direction only
b. In either direction
c. Constant at all times
d. Less than the gate current flow value

16. A triac can serve as the switching device for a programmable logic controller AC output module. (True/False)

17. Answer the following with reference to the triac variable AC control circuit shown in Figure 9-27.

a. The control logic controls the which the triac is switched on.

b. The output waveform is still AC, but the adjustable. on the AC waveform at current value is​

Answers

Current flow between the main terminals of a triac is  In either directionA triac can serve as the switching device for a programmable logic controller AC output module isTrue.The control logic controls the which the triac is switched on.

What is triac ?A TRIAC is a three terminal electronic device that, when activated, conducts current either way. TRIAC is a trademarked but genericized term. Thyristors are a subset, and silicon controlled rectifiers are connected to TRIACs.As the triac may be switched "ON" by either a positive or negative Gate pulse, regardless of the polarity of the AC supply at that moment, it is the most often used semiconductor device for switching and power regulation of AC systems.Two thyristors connected in antiparallel and having a common gate are represented by the TRIAC symbol. For better comprehension, the analogous two-thyristor structure is also provided.

To learn more about triac refer to:

https://brainly.com/question/29315312

#SPJ1

What distinguishes an architect’s use of creative thinking and an architect creating drafts, layouts, and specifications?

Answers

Only the activities of drafts, layouts and specification involves applied art skills distinguishes an architect’s use of creative thinking  Hence option A is correct.

What is creative thinking?

Creative thinking is defined as the capacity to tackle a situation or difficulty from a novel angle, alternate perspective, or unconventional thinking. Creative thinking, also referred to as creative problem-solving, is an important and marketable soft skill in a wide range of industries.

The architect  will think about the creative changes in drafting the text, in making the specifications and in making new and affective layouts.

Thus, only the activities of drafts, layouts and specification involves applied art skills distinguishes an architect’s use of creative thinking  Hence option A is correct.

To learn more about creative thinking, refer to the link below:

https://brainly.com/question/12228697

#SPJ1

after servicing the air filter on an etc equipped vehicle, the technician has forgotten to connect the throttle motor wiring. what will happen when the vehicle is started?

Answers

If the technicians has forgotten to connect the throttle motor, then when the vehicle is started, the engine will start but not accelerate, idle speed between 1200 and 1600 RMP.

A throttle is a device used to control fluid flow through restriction or barrier. The limiting of incoming gases (through the use of a throttle) can increase or decrease an engine's output, but usually decreases it. Informally, the term "throttle" now denotes any device used to control an engine's power or speed, such as the accelerator pedal on an automobile.

In the context of aviation, what is frequently referred to as a throttle is also known as a thrust lever, particularly for aircraft powered by jet engines. The regulator is the term for the valve that regulates steam in a steam locomotive.

To know more about throttle click here:

https://brainly.com/question/12866842

#SPJ4

Q4. Consider the skier on a slope shown in the figure below. Her mass including equipment is 60.0 kg.
(a) What is her acceleration if friction is negligible?
(b) What is her acceleration if friction is known to be 45.0 N?

Answers

Note that the Skier's acceleration if friction is near zero is 4.14m/s, while her acceleration if friction is 45.0N is 3.39m/s.

What is acceleration?

In mechanics, acceleration is defined as the rate of change of an object's velocity with respect to time. Vector quantities are accelerations. The orientation of an object's acceleration is determined by the orientation of its net force.

The change in velocity (v) over the change in time (t) is expressed by the equation a = v/t. This enables you to calculate how quickly velocity varies in meters per second squared (m/s²).

To arrive at the above values, note that we are given:

Mass = 60Kg

Friction = 45N

The formula for acceleration used here is:

a = g x sinθ. where

a = acceleration

g = gravity constant and

Sinθ is the angle of incline.

This is because acceleration is directly proportional to the sine of the incline angle (θ), When sinθ is 1, the angle of the incline is 90°. Incline here accounts for the incline of the skier's body as she descends.

Hence:

a = 9.8 x sin25°

a = 9.8 x 0.422

a = 4.14m/s where friction is negligible.

B)

Where friction is 45.0N, we must use the following formula to account for same:

a = g x sinθ - (f/m);

Where f is friction (45.0N) and

m is mass (60kg)

substituting the values we have:

a = 9.8 x sin 25° - (45/60)

a = 9.8 x 0.422 - 0.75

a = 4.14 - 0.75

a = 3.39 (m/s)

Learn more about acceleration:
https://brainly.com/question/12550364
#SPJ1

a food storage chamber requires a refrigeration system of 15-ton capacity operating at an evaporator temperature of -8oc and a condenser temperature of 30oc. refrigerant ammonia (r-717) is used and the system operates under saturated conditions. determine:

Answers

A refrigeration system with a 15-ton capacity is necessary for a food storage chamber. The effect of cooling is 983.152 KJ/kg, and the rate of heat production is 6926.3 KW.

so ,

h3 = h4 = 323.08 kJ/Kg

So ,

Refrigeration effect RE = hi - hy

= 1306.1232 - 323.08

RE = 983.152 KJ/ kg

so , Refrigerent flow rate m= 52.5/983.152

m = 0.053 kg/s .

And rate of heat removed by condenser

m(h2-h3)

6.045(1468.87-323.08)

=6926.3 KW

Refrigeration, the procedure of removing heat from a confined area or from a substance in order to lower the temperature By transferring heat from a low-temperature medium to a high-temperature medium, a process known as refrigeration is accomplished.

Learn more about Refrigeration here:

https://brainly.com/question/13002119

#SPJ4

precipitation increases as air rises and water vapor condesnes, resulting in vegetation that thrives with a large amount of moisture

Answers

The statement precipitation increases as air rises and water vapor condense, resulting in vegetation that thrives with a large amount of moisture is True.

What is a moisture meter?

To determine how much water is present in a particular substance, moisture meters are employed. It is possible to utilize this information to identify whether the material needs additional inspection, is unexpectedly wet or dry, or is otherwise ready for use.

Paper and wood goods are particularly sensitive to moisture levels. Moisture content has a significant impact on physical qualities, and material may gradually deteriorate if its moisture content is excessive over time.

To learn more about a moisture meter, use the link given
https://brainly.com/question/16048905
#SPJ4

a steel cylinder whose capacity is 71.2 cubic feet at 2475 psi and an aluminum cylinder whose capacity is 80 cubic feet at 3000 psi are both filled to 2000 psi. which cylinder contains more air?

Answers

The steel Cylinder . you need to compare how much capacity each psi accounts for in a steel cylinder.

71.2cf divided by 2475 psi gives a value of.0287cf for each psi.

If you divide 80cf by 3000psi, you get.0266cf per psi in an aluminum cylinder.

Steel .0287cf per psi X 3000=57.4cf.

Aluminum .0266cf per psi X 2000psi = 53.2cf.

What is a cylinder?

In geometry, a cylinder is one of the basic 3d shapes with two parallel circular bases at a distance. A curved surface connects the two circular bases at a fixed distance from the center. The axis of the cylinder is the line segment connecting the centers of two circular bases. The height of the cylinder is defined as the distance between the two circular bases. One real-world example of a cylinder is an LPG gas-cylinder.

To know more about cylinder, check out:

https://brainly.com/question/27440983

#SPJ4

In the mesh created, you should have 1000 elements and 1111 nodes. How many values will Fluent have to determine directly by solving a system of algebraic equations? Please input answers as an integer (eg. 1, or 80, or 150, etc.)

Answers

The number of values that the Fluent will have when 1000 elements and 1111 nodes are created is 20

What will the number of values be?

Number of elements along x direction is m and along y direction is n.

So, m × n = 1000 ( Elements)

And m × n + m + n + 1 = 1111 (Nodes)

Or, m + n = 1000

If m = 100 then n = 10. These values satisfy both the equations.

Now, for each element there will be one velocity component, pressure or temperature. So, 1000 algebraic simultaneous equations will be there for each case.

Learn more about node on:

https://brainly.com/question/28064122

#SPJ1

g you are designing a concrete mixture for a concrete wall that requires a compressive strength of 5700 psi. the system requires no air entrainment, but is wet continuously. what is the appropriate water to cementitious materials ratio that should be used in this mixture?

Answers

One-fifth the narrowest dimension between the sides of forms, bundles of bars, prestressing tendons, or prestressing ducts should be the maximum size of coarse aggregate.

Concrete mix proportioning, also known as mix design, is a procedure that entails two linked steps: (1) choosing the appropriate materials, and (2) figuring out their relative ratios to make concrete with the right workability, strength, and durability as economically as feasible. The 1:2:4 ratio is used to blend the three essential components of this concrete, which are concrete, sand, and aggregate. This results in concrete of average strength. Depending on the qualities of the cement and the local weather at the concrete site, it can take anywhere from 30 to 90 minutes to set.

Learn more about concrete here-

https://brainly.com/question/29616967

#SPJ4

During this experiment, it was important to keep some parameters constant so we can compare the efficiency of different alcohols. Which one of the parameter was not constant?.

Answers

The purification of a wide range of materials involves the use of distillation, a significant commercial procedure.

The purification of a wide range of materials involves the use of distillation, a significant commercial procedure. However, it would definitely be helpful to clarify the terms that describe the procedure and related qualities before we start a discussion of distillation.

Although you may be familiar with several of these terms, you might not be aware of their precise definitions. Let's start by outlining the procedure for changing a material from its condensed phase to its gas phase. This process is known as sublimation for solids and vaporization for liquids. Both procedures call for heat.

To know more about distillation click here:

https://brainly.com/question/29037176

#SPJ4

the amount of heat required to evaporate the refrigerant in a cycle is 200 kj/min. the work supplied to the compressor is 50 kj/min. calculate the cop.

Answers

The COP is now worth around 1.34.Lower values of COP will be produced by lower cold space and greater warm space temperatures.

A freezer's COP is what?A deep freeze unit will be closer to 1.0 than a typical domestic refrigerator, which could have a coefficient of performance (COP) of around 2.5. Lower values of COP will be produced by lower cold space and greater warm space temperatures.The formula for calculating the coefficient of performance, or COP as it is more popularly known, is COP = ((T2)/(T2 - T1)), where T2 stands for the hot temperature and T1 for the cold temperature. These can also be, similarly: COP = heat ejected / (heat ejected - heat provided)In the absence of it, COP = 200 / (200 - 50) = 1.34As a result, the COP is worth around 1.34.      

To learn more about COP refer to:

https://brainly.com/question/12950677

#SPJ4

what is the most important action for the cota to take first when molding heated thermoplastic material during fabrication of a hand-based orthotic?

Answers

Custom splints are most frequently made using low temperature thermoplastic (LTT) materials. Materials have a low melting point because water softens them.

A thermoplastic splint: what is it?A thermoplastic splint is a specially manufactured medical device intended to address rheumatic or orthopaedic issues with the upper limb (fingers, hand and wrist). You can use it at any age. It is constructed of plastic that can be molded, and it can be altered and exactly matched to a limb. Custom splints are most frequently made using low temperature thermoplastic (LTT) materials. Materials are low temperature because water heated to between 135 and 180 degrees fahrenheit causes them to soften. When plastic is heated, it becomes malleable and, after cooling, returns to its previous hardness.Custom splints are most frequently made using low temperature thermoplastic (LTT) materials. Materials have a low melting point because water softens them.    

To learn more about Melting point refer to:

https://brainly.com/question/40140

#SPJ4

what are the advantages of a single-phase full-wave bridge rectifier over the full-wave rectifier with center-tapped transformer

Answers

In a full-wave rectifier with a center tap, a single diode conducts once every half cycle.In contrast, two diodes connected in series conduct once every half cycle in a bridge rectifier.As a result, a bridge rectifier has a higher voltage drop.

Why is a Full Wave Bridge Rectifier better than a Full Wave Center Tapped Rectifier?A bridge rectifier does not require a bulky center tapped transformer, nowadays the center tapped transformers are costlier than diodes and a step-down transformer hence reduced size and cost.The bridge rectifier's principal benefit is that it generates roughly twice as much output voltage as a full-wave rectifier using a center-tapped transformer.However, this circuit is similar to a low-cost rectifier because it does not require a center-tapped transformer. A half-wave rectifier is less efficient than a bridge rectifier.However, the center-tapped full-wave rectifier and the Bridge Rectifier can have the same efficiency.Compared to a half-wave rectifier, a bridge rectifier produces a smooth output.

To learn more about full-wave bridge rectifier refer

https://brainly.com/question/14661951

#SPJ4

A _________ conversion involves running the old and new systems simultaneously for a time, which is is rarely used, since it impractical for customer-facing e-commerce systems.

Answers

Compare and contrast direct conversion and parallel conversion.

what is the exact process involved?

Both conversion tactics center on how users are transitioned to the new system. The old system is "unplugged" and the new system is turned on in a direct conversion. The new system must be used by the users; they have no other option. The old system is temporarily used while the new system is activated in the parallel conversion plan. The direct approach is obviously more dangerous because there is no backup in the event that severe system problems are found.

If a significant flaw in the new system is found, the parallel conversion will keep the old system operational. However, the expense and additional work of utilizing both systems at once must be taken into account.

Hence to conclude Compare and contrast direct conversion and parallel conversion involves running the old and new systems

To know more on compare and direct conversions follow this link

https://brainly.com/question/3164773

#SPJ1

9.35 wp air enters the compressor of an ideal air-standard brayton cycle at 100 kpa, 300 k, with a volumetric flow rate of 5 m3/s. the turbine inlet temperature is 1400 k. for compressor pressure ratios of 6, 8, and 12, determine a. the thermal efficiency of the cycle. b. the back work ratio. c. the net power developed, in kw.

Answers

The calculated values are thermal efficiency 0.48 back work ratio is 0.414 and power is 2303.4

P₁= 100 KPa

T₁=300 K

Q=5 m3/s volume flow rate

T₃=1400 K

r= 10

We are aware that the specific heat constant pressure for air is 1.005 KJ/kg and the heat capacity ratio is 1.4.

γ= 1.4

Cp = 1.105 KJ/kg.

in the Brayton cycle

Putting the values now

T₂=1.93 x 300

T₂=579 K

Putting the values now

T₄=726.32 K

We are aware of efficiency.

Heat addition is well known.

Q a= (T3-T2) Cp

rejection of heat

Qr= (T4-T1) Cp

η = 0.48

Work-to-back bwr=0.414

c)

Net heat = Net work

Heat flux = Qa – Qr

Qr= (T4-T1) Cp

Q a= (T3-T2) Cp

Net heat is equal to 1.005 (1400-579-726.32+300) KJ/kg.

396.65 KJ/kg of net energy

The fact that

P V = m R T

P = ρ R T

P= 2303.42 KW

Learn more about efficiency here-

https://brainly.com/question/13154811

#SPJ4

To cool a given room it is necessary to supply 4ft^3/s of air through a 8-in diameter pipe. approximately how long is the entrance length of the pipe

Answers

The pipe's entrance measures 17.7 feet.

The axial distance required to arrive at a value of Nu(x) that is 1.05 times the fully defines the thermal entry length Lth.

What is  the entrance length of the pipe?Entrance length is the measurement of the length of the entry zone, which is the space immediately after the pipe entrance.The dimensionless Reynolds number, Prandtl number, and pipe diameter all affect the thermal entrance length. To determine thermal entry length, the Prandtl number modifies the hydrodynamic entrance length.When viscosity effects are entirely present and pipe entry effects are not taken into account, a pipe flow is said to be fully developed. Consider a pipe flow that is incompressible. Pressure. The length of the hydrodynamic entry LHY is defined, a little haphazardly.

To learn more about entrance length of the pipe refer to:

https://brainly.com/question/12937102?source=archive

#SPJ4

From the list of problems below, check all that are known to be NP-complete. You do not need to justify your answer. (Set cover) Given a graphGand an integerk, find a set of verticesUof size at mostksuch that every edge is adjacent to at least one vertex inU. (Max SAT) Given a CNF formula and an integer g, find a truth assignment that satisfies at leastgclauses. (Linear programming) Given am×nmatrixA, and vectorsb∈Rm,c∈Rn, find the solution of maxcTx s.t. Ax≤bx≥0​(MST) Given an undirected, weighted graphG=(V,E)find a minimum spanning tree ofG, or outputs FALSE if such tree does not exist.

Answers

Any computing issue that falls within the category of NP-complete problem has yet to find an effective solution algorithm.

Which problems are NP-complete?Any of a family of computer problems that have no effective solution algorithm are referred to as NP-complete issues. The traveling salesman problem, satisfiability issues, and graph-covering issues are only a few examples of the significant computer science issues that fall under this category.The difficulty of NP and NP-Complete issues is equal. If a problem is included in both NP and NP-Hard Problems, it is said to be NP-Complete. This statement, "This problem can change into an NP-complete problem on a non-deterministic Turing machine," is untrue for the obvious reason that while any problem in P is also a problem in NP, no problem in P is an NP-complete problem (unless P=NP, of course). If P is an NP problem and all NP problems convert into NP-complete problems, then P must also undergo this transformation.

To learn more about NP-complete problem refer to:

https://brainly.com/question/17218056

#SPJ4

within the function analysis phase of the value engineering job plan the tool used for defining modeling and analyzing functions is known as the

Answers

IDEF0 is a function modelling methodology for describing manufacturing functions that includes a functional modelling language for information system analysis.

What is IDEF0 ?The acronym IDEF0 refers to a function modelling methodology for describing manufacturing functions that provides a functional modelling language for the analysis, development, reengineering, and integration of information systems, business processes, or software engineering analysis.IDEF0 is a modelling language in the field of software engineering that is part of the IDEF family. It is based on the functional modelling language Structured Analysis and Design Technique (SADT).The IDEF0 Functional Modeling method is intended to model an organization's or system's decisions, actions, and activities. It is based on the well-known graphic modelling language Structured Analysis and Design Technique (SADT), which was created by Douglas T. Ross and SofTech, Inc. IDEF0, in its original form, includes both a definition of a graphical modelling language (syntax and semantics) and a description of a comprehensive modelling methodology.

To learn more about IDEF0 refer :

https://brainly.com/question/15003162

#SPJ4

technician a says that hydrogen exists by itself in nature. technician b says that hydrogen has better specific energy than fossil fuels. which technician is correct?

Answers

Technician b says that hydrogen has better specific energy than fossil fuels. so technician b is correct.

Does hydrogen have the highest specific energy?Although hydrogen has the highest energy density per mass of any fuel, it has the lowest energy density per unit volume due to its low ambient temperature density, necessitating the development of new storage technologies with the potential for higher energy density.Hydrogen is utilized as a rocket fuel and in fuel cells to generate power on some spacecraft because it is beneficial as an energy source or fuel due to its high energy content per unit of weight.Since hydrogen has a significantly higher energy content than fossil fuels, less of it is required to carry out any given task.

To learn more about energy refer to:

https://brainly.com/question/25959744

#SPJ4

normally counters are retentive. this means that if your accumulated count is up to 300 and power to your system is lost, when power is restored the a

Answers

The correct answer is when retentive power is restored the accumulated count will be 300.

PLC counters are normally retentive; that is, whatever count was contained in the counter at the time of a proces- sor shutdown will be restored to the counter on power-up. The counter may be reset, however, if the reset condition is activated at the time of power restoration.A counter instruction is an input instruction. A counter's input signal can come from an external device such as a sensor. Up and down counters may be programmed together to count up and down. Counters can count past their preset values.

To learn more about retentive click the link below:

brainly.com/question/28851511

#SPJ4

Consider a datagram network using 32-bit host addresses. Suppose a router has four links, numbered 0 through 3, and packets are to be forwarded to the link interfaces as follows: Describe how your forwarding table determines the appropriate link interface for datagrams with destination addresses: 11001000 10010001 01010001 01010101 11100001 01000000 11000011 00111100 11100001 10000000 00010001 01110111

Answers

The forwarding table will determine the appropriate link interface for the datagram with destination addresses in the following way:

Prefix match for first address is 5th entry: link interface 3Prefix match for second address is 3rd entry: link interface 2Prefix match for third address is 4th entry: link interface 3

Deine a datagram. What is its use?

A datagram is a fundamental transfer unit connected to a packet-switched network, or it can be described as a message delivered over the network whose arrival, arrival time, and content are not guaranteed. Header and payload portions are the typical organizational units of datagrams. A packet-switched network can use a datagram to communicate without establishing a connection.

A datagram is a self-contained message that is mostly used for wireless communication. Its source and destination addresses are listed in the header. A datagram is a short amount of data that can only be transferred once; unlike a packet, which is a connectionless protocol, a datagram cannot handle communication of any other data.

To learn more about datagram, use the link given
https://brainly.com/question/20038618
#SPJ1

what are the seven steps taken in commissioning an instrument

Answers

The Seven steps taken in commissioning an instrument are

step-1 Planning

step-2 Factory Acceptance testing

step-3 Mechanical completion

step-4 On-site commissioning

step-5 Process/ System startup

step-6 Performance Verification

step-7 Operational Readiness

What takes place in On-site commissioning?

Pre-commissioning tasks for mechanical systems include pipe cleaning and flushing, pressure testing, and leak testing.

What takes place in Performance verification?

The commissioning team makes any adjustments to the plant's process operation after consulting with the owner, the consultant SME, and both.

A systematised approach to commissioning paperwork. writing up testing and verification methods for all crucial system performance elements.

Therefore, the seven steps are given.

To learn more about the Planning from the given link

https://brainly.com/question/25453419

#SPJ9

What three modern products would not be available without watt’s contribution to the field?.

Answers

Locomotives, steam ships, and factories with coal-powered machinery these modern products would not be available without watt’s contribution.

How did James Watt's invention affect society?

The industrial society of the 18th century was significantly impacted by James Watt's steam engine. Compared to preceding models, it was more economical and efficient.

The watt, a unit of power in the International System of Units (SI) equal to one joule of work performed per second, was called in honour of Watt because of his contributions to science and industry.

Watt's steam engine allowed the steam engine to be utilised to drive rotating equipment in factories like cotton mills, expanding its range of potential uses. It should come as no surprise that Watt's steam engine was in high demand and was swiftly adopted by numerous industries.

His modifications to the steam engine's design transformed it from a water pump for coal mines with few other uses into the source of propulsion that sparked the Industrial Revolution. Rather than being a theorist, Watt is better renowned for his work as an innovator and mechanic.

To learn more about James Watt refer :

https://brainly.com/question/1008453

#SPJ4

5.4-1 the american standard code for information interchange (ascii) has 128 binary-coded characters. if a certain computer generates data at 600,000 characters per second, determine the following. (a) the number of bits (binary digits) required per character. (b) the number of bits per second required to transmit the computer output, and the minimum bandwidth required to transmit this signal. (c) for single error detection capability, an additional bit (parity bit) is added to the code of each character. modify your answers in parts (a) and (b) in view of this information. (d) show how many ds1 carriers would be required to transmit the signal of part (c) in the north american digital hierarchy (sec. 5.4.2).

Answers

A bit (binary digit) is a single switch that can be turned on or off, zero or one. ASCII is a 7-bit code.

What is a bit?The smallest piece of data that a computer can process and store is called a bit (binary digit). Similar to an on/off switch for lights, a bit is always in one of two physical states. One binary number, often a 0 or 1, is used to indicate the state. But yes/no, on/off, or true/false can also be used to describe the state. Capacitors that store electrical charges are used to store bits in memory. Each bit's state and value are determined by the charge.Although a computer may be able to examine and change data at the bit level, most systems process and store data in bytes. An eight-bit string that is considered a single unit is called a byte. Computer memory and storage are always described in terms of bytes. For instance, a storage device might be able to hold 1 terabyte (TB), or 1,000,000 megabytes, of data. In order to put this into perspective, 1 MB is equivalent to 1 million bytes, or 8 million bits. In other words, a 1 TB drive can hold 8 trillion bits of data.

To Learn more About   bit (binary digit) refer to:

https://brainly.com/question/16612919

#SPJ4

If a microhydro dam generates 1 mw of power, how much energy will it produce annually?.

Answers

The micro-hydro dam will produce 8.76 MUs of energy annually.

Given that the micro-hydro dam generates 1 MW of power.

To determine the energy will it produce annually.

1 Kwh Equals 1 unit of electricity ( kW hours)

A 1 MW plant is a 1000 KW plant.

If a plant operates at full capacity 24 hours a day, the number of units produced in a day is:

1000 KW multiplied by 24 hours is 24000 Kwh or 24000 units.

Units manufactured in a given year (assuming it works all 365 days in a year)

1000 KW multiplied by 24 hours multiplied by 365 is 8,760,000 Kwh or 8.76 Million Units = 8.76 MUs

Thus, the micro-hydro dam will produce 8.76 MUs of energy annually.

To learn more about the dams click here:

https://brainly.com/question/6850854

#SPJ1

4. consider a cylinder fitted with a piston that contains 2 mol of h2o in a container at 1000 k. calculate how much work is required to isothermally and reversibly compress this gas from 10 l to 1 l, in each of the following cases: a) use the ideal gas model b) use the redlich-kwong equation (you can use software to solve integration) c) use the steam tables d) compare these three methods.

Answers

Using the ideal gas model work done is -38287.28 j ,using  redlich-kwong equation work done is -21600 J and using steam tables  work done is -37835.86 J .

a)

Ideal gas equation, Pv = nRT

P = nRT/v

Work done = Integral P dv

= Integral (nRT/v) dv

For isothermal process, T remains constant. Hence,

W = nRT Integral (1/v) dv

W = nRT ln (v2 / v1)

= 2×8.314×1000 ln (1/10) R=universal gas constant = 8.314j/k

= -38287.28 J

b)

Redlich Kwong equation

P = RT / (V-b) - a / (T0.5V(V+b))

V known as molar volume = V / n.

V₁=1/2 = 0.5  = 0.0005. m³/mol.

V₂=10/2 = 5 = 0.005. m³/mol.

W = Integral P dv

W = Integral [RT / (V-b) - a / (T0.5V(V+b))] dv

For constant T we get,

W = RT ln [(V2 -b) / (V1-b)] - (a / T0.5) (1/b) [ln (V2 / (V2+b)) - ln (V1 / (V1 +b))]

For water, a = 9.869 Pa-K0.5-m6 / mol2 and b = 21.1*10-6 m3 / mol

Using R = 8.314 J/ mol-K

Putting values,

W = -18917.93 J/mol

For 2 moles, we get

W = -18917.93*2

W = -37835.86 J

c)

For water, gas constant R = 461.89, Molecular mass is known as  M is equal to 18

Mass m is two moles water = 18×2 g

water = 36 g

water is converted into 0.036 kg water

Initial specific volume = V₁/ m = 10 / 0.036 = 0.278 m3/kg

steam tables, at 1000 K and v = 0.278  qand u2 = 3520

q - w = u2 - u1

0 - w = 3520 - 3460

w = -60 kJ/kg

For 0.036 kg water,

W = 0.036*(-60)

W = -2.16 kJ = -21600 J

Learn more about work done here:

https://brainly.com/question/16976412

#SPJ4

if the maximum stress in the elastic limit for a piece of plastic is 350 mpa (mega-pascals), what will happen to the plastic after it is subjected to a 355 mpa stress?

Answers

If a piece of plastic can withstand a maximum stress of 350 mpa, its elastic limit (mega-pascals) It'll change shape forever.

The definition of permanent deformity?

Permanent deformation refers to a structural part of a rail vehicle going through a permanent change in shape. When a material experiences tensile, compressive, bending, or torsion loads that are greater than its yield strength, causing it to stretch, compress, buckle, bend, or twist, this irreversible distortion is known as plastic deformation. The strain that results from stressing rocks might be elastic, ductile, or brittle. Deformation is a broad term for this transformation. After a stress is discharged, elastic deformation is strain that may be reversed. For instance, a rubber band will elastically return to its former shape after being stretched.

To learn more about Permanent deformation refer to

https://brainly.com/question/2612478

#SPJ4

which material/beam tested showed the least deflection? a. aluminum beam a (0.5 x 0.5) b. aluminum beam b (0.25 x 0.5) c. steel beam d (0.5 x 0.5) d. aluminum beam c (0.5 x 0.25)

Answers

Option c is correct. The steel beam d (0.5 x 0.5) tested showed the least deflection. Beam deflection refers to the state in which a beam has changed from its initial shape as a result of a force, load, or weight.

Beam deflection refers to the state in which a beam has changed from its initial shape as a result of a force, load, or weight. Obtaining equations that allow us to accurately calculate beam deflections in a variety of real-world situations is one of the most significant uses of beam deflection. Analysis of statically indeterminate beams also takes into account deflections.

In terms of structural engineering, deflection is the movement of a beam or node from its initial position as a result of loads and forces acting on the member. It is also referred to as displacement and can result from externally applied loads as well as from the structure's own weight and the force of gravity that applies to it.

To know more about beam deflections click here:

https://brainly.com/question/24230357

#SPJ4

if there are 20 turns in the primary and only 10 in the secondary and the transformer operates at 120v, the voltage in the secondary is .

Answers

If the transformer works at 120 volts and there are 20 turns in the primary but only 10 in the secondary, the voltage in the secondary is 60 volts.

Np/Ns=Ep/Es

20/10=120/Es

2Es=120

Es=60 v

Voltage is the variation in electric potential between two places. It is sometimes referred to as electric pressure, electric tension, or potential difference. The work required to transport a test charge between two places in a static electric field correlates to this. The energy per unit charge is known as voltage, also known as electromotive force. Voltage is the difference in electric potential between two points, to put it another way. Simply put, current is the rate of flow of an electric charge. Voltage is a unit used to measure the electrical potential that a battery has. Depending on the size and design, batteries range in voltage from a few hundredths of a volt to several hundreds of volts.

Learn more about Voltage here:

https://brainly.com/question/29445057

#SPJ4

which of the following is not a manufacturing process? group of answer choices job shop paint shop line flow continuous flow

Answers

Production line/ assembly line is not a manufacturing process. A factory assembly line that builds a product by transferring work from one station to the next until the product is complete.

A production line is a collection of coordinated procedures set up in a factory where parts are joined together to create finished goods or where raw materials are processed to create finished goods fit for consumption.

Usually, in order to make raw materials functional, such as metal ores, agricultural products like foodstuffs, or textile source plants like cotton and flax, a series of treatments is needed. The procedures for metal include crushing, smelting, and more refinement. For plants, the valuable material needs to be removed from the husks or other impurities before being processed for sale.

To know more about procedures click here:

https://brainly.com/question/18270087

#SPJ4

Other Questions
which disorder is described as an unregulated release of thrombin with subsequent fibrin formation and accelerated fibrinolysis? Jaheim made a bag of trail mix with 1/2 cup of almonds,6/7cup of apple slices, and 1/8cup of pumpkin seeds. About how much trail mix did Jahiem make? 2) People in Minnesota, USA, and Ontario, Canada, (along the US-Canada border) both watregularly play hockey.a. Direct diffusion.b. Indirect diffusion.C. Forced diffusion.Native American children into boarding schools while communicating with a client who has a delayed ability to process verbal communications, the nurse finds that the client is unable to understand the question. how should the nurse respond to this client? Can you find the inverse of the function y = 4x^2 + 12x + 9? Why or why not?What domain restrictions are necessary to allow the function to have an inverse?Find the inverse of the domain restricted function. how do people enter and leave the capital of yemen 1. how was the republican party divided over the treaty? who were the main protagonists of each republican side of the treaty? ending inventory is made up of the oldest purchases when a company uses a.retail method b.first-in, first-out c.last-in, first-out d.weighted average cost DescriptionPlease respond to the following regarding Lewis Thomas' "The Lie Detector":*Do you agree with Thomas that we are obliged to rely on each other? Explain.*Do you believe that our physical response to lying is positive for the future of humanity? Why or why not? Is medical technology and pathology the same course in university ? A line that intersects two or more lines in a plane at different points is called a. If our eyes could see a slightly wider region of the electromagnetic spectrum, we would see a fifth line in the Balmer series emission spectrum. Calculate the wavelength associated with the fifth line. Democrat maxwell frost made history when he became the first member of gen z to be elected to congress. How old is frost?. In which region of the world today do traditional populations have the highest proportion of neandertal ancestry?. the textbook authors, carter and warren, point out that the industrial revolution was aided by a large transfer of wealth from: What is an example of a positive punishment. . Neither A or B . Taking away your cell phone C. Cutting off your allowance the multiple streams theory suggests that the policy process contains three key streams. what are they Can you please help me the most common form of gene therapy involves inserting a normal gene into cells that contain a defective version of the gene. in order to use gene therapy to prevent a man from passing a defective gene on to future generations, you should try to insert normal copies of the gene into multiple choice somatic cells in the testes. bone marrow cells. germ-line cells. blood cells. Blake was a little concerned as he stood in the middle of the overcrowded elevator. The sign clearly stated that the total weight in the elevator could not exceed 2,000 pounds.Write an inequality to show the weight limit for the elevator.A) w > 2,000B) w < 2,000C) w 2,000D) w 2,000