Statistical methods designed for nominal data are not appropriate for interval level data, which involves meaningful differences between values.
The correct answer is (b) interval.
Nominal level of measurement is the lowest level of measurement that involves categorizing data into distinct groups or classes. Examples of nominal data include gender, race, religion, and marital status.
Statistical methods designed for nominal data include mode and frequency distribution. These methods are appropriate for nominal, ordinal, and interval data. However, it would not be appropriate to use them for ratio data, which involves the presence of a true zero point.
Therefore, option (d) is incorrect. Option (b) is the correct answer, as statistical methods designed for nominal data are not appropriate for interval level data, which involves meaningful differences between values.
To know more about intervals visit
https://brainly.com/question/30486051
#SPJ4
Complete Quetion:
If a statistic is designed for nominal level of measurement, then it would be appropriate to use that statistic on data at all these levels of measurement
a. ordinal.
b. interval.
c. ratio.
d. all of the answers are levels of measurement upon which it would be appropriate to use a statistic designed for nominal level.
(CO 6) If the coefficient of determination is 0.798, what percentage of the data about the regression line is unexplained?
Group of answer choices
79.8%
8.0%
20.2%
26.2%
Answer:
If the coefficient of determination is .798, then 79.8% of the data about this regression line is explained, so 20.2% of the data about this regression line is unexplained.
If a machine can produce 8 yards in 4 minutes how many can produce in 60
Answer:
120
Step-by-step explanation:
since 60 = 1 hour
60 divided by 4 = 15
15 x 8 = 120
Suppose a family has saved enough for a 10 day vacation (the only one they will be able to take for 10 years) and has a utility function U = V1/2 (where V is the number of healthy vacation days they experience). Suppose they are not a particularly healthy family and the probability that someone will have a vacation-ruining illness (V = 0) is 20%. What is the expected value of V?
Select one:
a. 10
b. 8
c. 2
d. 0
Answer: The expected value of V can be calculated as the sum of the products of the possible values of V and their corresponding probabilities. Let's consider the three possible scenarios:
V = 0 (with probability 0.2, as given in the problem)
V > 0 but V < 10 (with probability 0.8 * (9/10), because if nobody gets sick, they will have at least 1 healthy vacation day, and if they have 1 healthy day, they can still have 9 more days of vacation)
V = 10 (with probability 0.8 * (1/10), because if nobody gets sick, they can have all 10 days of vacation)
Using the utility function, we can see that the expected value of V is:
E[V] = 0 * 0.2 + (1/2) * (0.8 * 9/10) + 10 * (0.8 * 1/10)
E[V] = 0 + 0.36 + 0.8
E[V] = 1.16
Therefore, the expected value of V is 1.16. However, since V represents the number of healthy vacation days, it must be a non-negative integer. So, the closest integer to 1.16 is 1. Therefore, the answer is c. 2.
3x^2 - 2x - 4 is divided by x - 3
Answer:
Step-by-step explanation:
(C) For each capacitor to have 6 µC, each branch will have 6 µC since the two capacitors in series in each branch has the same charge. The total charge for the three branches is then 18 µC. Q = CV gives 18 µC = (3 µF)V
The voltage drop across each capacitor in the circuit will be 3 V, 2 V, and 1.5 V, respectively.
It is true that in a series circuit, each capacitor has the same charge, it does not mean that each branch will have the same charge.
In this specific circuit, the charge on the capacitors will be different in each branch, depending on the capacitance of the capacitor and the voltage drop across it.
The total charge on the capacitors in the circuit will be the same.
If we assume that each capacitor has a charge of 6 µC, then the total charge on the three capacitors in the circuit will be:
Q_total = 3 × 6 µC
= 18 µC
The capacitance of each capacitor, we can then calculate the voltage drop across each capacitor using the formula:
Q = CV
Q is the charge on the capacitor, C is its capacitance, and V is the voltage drop across it.
For the capacitor with a capacitance of 2 µF:
V1 = Q/C1
= 6 µC / 2 µF
= 3 V
For the capacitor with a capacitance of 3 µF:
V2 = Q/C2
= 6 µC / 3 µF
= 2 V
For the capacitor with a capacitance of 4 µF:
V3 = Q/C3
= 6 µC / 4 µF
= 1.5 V
For similar questions on capacitor
https://brainly.com/question/30546246
#SPJ11
A pair of shoes is on sale for $76.50 after a 15% discount was applied. What was the original price of the shoes?.
The original price of the shoe before the discount was applied is $88
How to calculate the original price the shoe?A pair of shoes is on sale for $76.50
A discount of 15% was applied on the shoe
The original price of the shoe can be calculated as follows
=15/100 × 76.50
= 0.15 × 76.50
= 11.5
= 11.5 + 76.50
= 88
Hence the original price of the shoes before the application of discount is $88
Read more on discount here
https://brainly.com/question/18631484
#SPJ1
On [0, pi/4], the integral of sinxdx=
Answer: The integral of sin(x)dx on the interval [0, pi/4] is:
∫sin(x)dx = -cos(x) + C
where C is the constant of integration.
To evaluate this definite integral on the interval [0, pi/4], we substitute pi/4 for x in the antiderivative and then subtract the value of the antiderivative at x=0:
cos(pi/4) - (-cos(0)) = -(√2/2) - (-1) = 1 - √2/2
Therefore, the value of the integral of sin(x)dx on the interval [0, pi/4] is 1 - √2/2.
Approximately 72% of the U.S. population recycles. According to a green survey of a random sample of 250 college students, 182 said that they recycled. Akz - 0.10, Is there sufficient evidence to conclude that the proportion of college students who recycle is greater than 72%? Use a graphing calculator. Part 1 out of 4 State the hypotheses and identify the claim with the correct hypothesis. (select) H,:P (select) H:p (select) (select) The hypothesis test is a (select) test.
The hypothesis test is a one-tailed test, since we are testing for a specific direction (greater than 72%).
What is hypothesis?An assumption is said to as a hypothesis when it is supported by evidence. Any investigation that turns the research questions into predictions must start here. Variables, the population, and the relationships between the variables are among its constituent parts.
The hypotheses for the test are:
H0: p = 0.72 (null hypothesis)
Ha: p > 0.72 (alternative hypothesis)
The claim is that the proportion of college students who recycle is greater than 72%, which corresponds to the alternative hypothesis.
The hypothesis test is a one-tailed test, since we are testing for a specific direction (greater than 72%).
Learn more about hypothesis on:
https://brainly.com/question/14587073
#SPJ4
you measure 27 backpacks' weights, and find they have a mean weight of 52 ounces. assume the population standard deviation is 7.7 ounces. based on this, construct a 95% confidence interval for the true population mean backpack weight
95% confident that the true population mean backpack weight falls between 49.06 and 54.94 ounces.
To construct a 95% confidence interval for the true population mean backpack weight, we can use the following formula:
Confidence interval = mean weight ± (critical value x standard error)
Where the critical value is determined based on the level of confidence and the degrees of freedom (n-1), and the standard error is calculated as the population standard deviation divided by the square root of the sample size.
In this case, since we have a sample size of 27, the degrees of freedom would be 26. Using a t-distribution table, we can find the critical value for a 95% confidence level with 26 degrees of freedom to be 2.056.
The standard error can be calculated as:
standard error = 7.7 / sqrt(27) = 1.48
Therefore, the 95% confidence interval can be calculated as:
Confidence interval = 52 ± (2.056 x 1.48) = (49.06, 54.94)
This means that we can be 95% confident that the true population mean backpack weight falls between 49.06 and 54.94 ounces, based on the sample of 27 backpacks with a mean weight of 52 ounces and a population standard deviation of 7.7 ounces.
Visit here to learn more about confidence interval brainly.com/question/13067956
#SPJ11
in 2020 in north america the number of connections is 1.4 per person, versus 1.1 in apac. how many more unique users were there in apac in 2020?
In 2020, the number of connections per person in North America was 1.4, while in the Asia-Pacific (APAC) region, it was 1.1. To determine the number of unique users in each region, we need to take into account the total population and the connections per person.
First, we should understand that a higher number of connections per person does not necessarily mean more unique users. In fact, it could imply that users in North America have multiple connections, such as smartphones, tablets, and other devices, whereas users in APAC may have fewer devices per person.
In order to calculate the number of unique users in each region, we need to know the total population for both North America and APAC in 2020. Once we have the population figures, we can divide the total number of connections in each region by the connections per person. This will give us an estimate of the unique users in both regions.
Finally, to find out how many more unique users there were in APAC in 2020 compared to North America, we can subtract the number of unique users in North America from the number of unique users in APAC. This difference will show the additional unique users present in the APAC region during 2020.
To know more about APAC visit:
https://brainly.com/question/13295952
#SPJ11
PLEASE HELP I NEED IT DONE TODAY
The box plots display measures from data collected when 15 athletes were asked how many miles they ran that day.
A box plot uses a number line from 0 to 13 with tick marks every one-half unit. The box extends from 5 to 10 on the number line. A line in the box is at 7. The lines outside the box end at 0 and 11. The graph is titled Group B's Miles, and the line is labeled Number of Miles.
A box plot uses a number line from 0 to 13 with tick marks every one-half unit. The box extends from 1 to 5 on the number line. A line in the box is at 2.5. The lines outside the box end at 0 and 11. The graph is titled Group C's Miles, and the line is labeled Number of Miles.
Which group of athletes ran the least miles based on the data displayed?
Group B, with a narrow spread in the data
Group C, with a wide spread in the data
Group B, with a median value of 7 miles
Group C, with a median value of 2.5 miles
The group of athletes that ran the least miles is Group C, with a median value of 2.5 miles. Therefore, the last option is correct.
When a dataset is sorted in ascending order, the median represents the middle value in the dataset. In this question, Group C's median distance is 2.5 miles, meaning that 50% of its participants can run lesser than or equal to 2.5 miles.
Whereas the median for Group B is 7 miles, which is more than the median for Group C. Therefore, in conclusion, we may say that Group C ran the least miles. The median figure, rather than the spread or range of the data, is what matters in this situation when determining which group ran the fewest miles.
Know more about box plot,
https://brainly.com/question/24335827
#SPJ1
Which statement is true about the ranges for the box plots? the range of the morning box plot is the same as the range of the afternoon box plot. The range of the morning box plot is 1 less than the range of the afternoon box plot. The range of the morning box plot is 1 more than the range of the afternoon box plot. The range of the morning box plot is 2 less than the range of the afternoon box plot.
The range of the Morning box plot is the same as the range of the Afternoon box plot. Therefore, the correct answer is option A.
A box and whisker plot—also called a box plot—displays the five-number summary of a set of data. The five-number summary is the minimum, first quartile, median, third quartile, and maximum. In a box plot, we draw a box from the first quartile to the third quartile. A vertical line goes through the box at the median.
Number of sales in Afternoon:
Minimum value = 4
First quartile = 8
Median = 14
Third quartile = 15
Maximum value = 16
Here, the range is 16-4=12
Number of sales in Morning:
Minimum value = 3
First quartile = 5
Median = 8
Third quartile = 12
Maximum value = 15
Here, the range is 15-3=12
Therefore, the correct answer is option A.
Learn more about the box plot here:
https://brainly.com/question/1523909.
#SPJ6
Exercise 3. 3. 1. Write the system ,x1′=2x1−3tx2 sint, x2′=etx1 3x2 cost in the form.
x=p(t)x+f(t)
The system of equation for the given system in the form x = p(t)x + f(t) is equal to x = [-1 -3t] x + [sint]
[0 + 3]x + [cost]
System of equation is,
,x₁′=2x₁−3tx₂ + sint,
x₂′=([tex]e^{t}[/tex])x₁ 3x₂ + cost
System in the form x = p(t)x + f(t), first express it in matrix form,
x' = A(t)x + g(t)
where x = [x₁, x₂]ᵀ,
A(t) is a 2x2 matrix,
and g(t) is a column vector with entries sint and cost.
Using the given system, we have,
x₁′ = 2x₁ - 3tx₂ + sint
x₂′ = eᵗx₁ + 3x₂ + cost
Rewriting this in matrix form, we get,
[tex][x_{1}]^{'} = [2 -3t] \left[\begin{array}{ccc}x_{1}^{} \\x_{2}^{} \end{array}\right][/tex] + [sint]
[tex]\left[\begin{array}{ccc}x_{2}^{'} \end{array}\right][/tex] [tex]= \left[\begin{array}{ccc}e^{t} &3\end{array}\right][/tex][tex]\left[\begin{array}{ccc}x_{1}^{} \\x_{2}^{} \end{array}\right][/tex]+ [cost]
Now, to write this in the form x = p(t)x + f(t),
we need to find a function P(t) such that A(t) = P(t) - P'(t),
where P'(t) is the derivative of P(t).
For A(t), we have,
A(t) = [2 -3t]
[eᵗ 3 ]
To find P(t), integrate the diagonal entries of A(t),
P(t) = [2 3t]
[eᵗ 3]
Then, compute P'(t) and subtract it from P(t) to get A(t),
P'(t) = [0 3]
[eᵗ 0]
A(t) = P(t) - P'(t)
= [2-3t -0 -3]
[eᵗ - eᵗ + 3 - 0]
Therefore, the system of equation x' = A(t)x + g(t) can be written as,
x = [-1 -3t] x + [sint]
[0 + 3]x + [cost] which is in the form x = p(t)x + f(t).
Learn more about system of equation here
brainly.com/question/31841641
#SPJ4
The above question is incomplete, the complete question is:
Write the system ,x₁′=2x₁−3tx₂ + sint, x₂′=(e^t)x₁ 3x₂ + cost in the form.
x=p(t)x + f(t)
What is the standard form for the quadratic function? g(x)=(x+1)2−2 Responses g(x)=x2−2x−4 f begin argument x end argument equals x squared minus 2 x minus 4 g(x)=x2−1 f begin argument x end argument equals x squared minus 1 g(x)=x2+2x−1 g begin argument x end argument equals x squared plus 2 x minus 1 g(x)=x2−3
The standard form for the quadratic function is g(x) = x² + 2x - 1.
The standard form for a quadratic function is:
f(x) = ax² + bx + c
where a, b, and c are constants.
Out of the given options, the quadratic function that is already in standard form is:
g(x) = x² + 2x - 1
Learn more about Quadratic Function here:
https://brainly.com/question/18958913
#SPJ1
Find the mean and the standard deviation of the sampling distribution of possible sample proportions for a sample size of n = 400 with population proportion p = 0.5.
The standard deviation of the sampling distribution can be calculated using the formula: standard deviation = sqrt [p(1-p)/n] . Therefore, the mean of the sampling distribution is 0.5 and the standard deviation is 0.025.
The mean of the sampling distribution of possible sample proportions is equal to the population proportion, which is p = 0.5. The standard deviation of the sampling distribution can be calculated using the formula:
standard deviation = sqrt [p(1-p)/n]
Plugging in the values, we get:
standard deviation = sqrt [(0.5)(1-0.5)/400]
standard deviation = sqrt [(0.25)/400]
standard deviation = 0.025
Therefore, the mean of the sampling distribution is 0.5 and the standard deviation is 0.025.
To find the mean and standard deviation of the sampling distribution for sample proportions, you can use the following formulas:
Mean (μ) = p
Standard Deviation (σ) = √(p(1-p)/n)
Given the sample size (n) = 400 and population proportion (p) = 0.5, you can calculate the mean and standard deviation as follows:
Mean (μ) = 0.5
Standard Deviation (σ) = √(0.5(1-0.5)/400) = √(0.5*0.5/400) = √(0.125/100) = √(0.00125) ≈ 0.0354
So, the mean of the sampling distribution is 0.5 and the standard deviation is approximately 0.0354.
Visit here to learn more about standard deviation : https://brainly.com/question/23907081
#SPJ11
the angle of elevation to the top of a building in new york is found to be 5 degrees from the ground at a distance of 1 mile from the base of the building. using this information, find the height of the building. round to the tenths. hint: 1 mile
For the angle of elevation to the top of a building is 5 degrees from the ground, the height of building is equals to 0.1 miles.
A buliding in New York. The angle of elevation to the top of a building from ground = 5°
Distance from ground point to base of building = 1 mile
We have to determine the height of the building. Now, if we consider all scenario geometrically, then we see the right angled triangle present in above figure. The height of buliding = h
Using the Trigonometric Ratio [tex] tan(\theta) = \frac{height}{base} [/tex]
Substitute all known values in above formula, [tex]tan(5°) = \frac{h}{1 \: miles} [/tex]
From the trigonometric table, tan(5°) = 0.087
=> h = 1 × 0.087 miles
=> h = 0.087 miles ~ 0.1 miles
Hence, required height value is 0.1 miles
For more information about angle of elevation, visit :
https://brainly.com/question/27243378
#SPJ4
The dimensions of a rectangle can be expressed as x+6, and x-2. If the area of the rectangle is 65 in^2, find the dimensions of the rectangle
The dimensions of the rectangle for the given area 65 square inches are 13in and 5in.
Dimensions of the rectangle are length and width.
Let us consider length of the rectangle = x + 6
And width of the rectangle = x -2
Area of the rectangle = 65 square inches
Area of the rectangle = length × width
Substitute the values we have,
⇒ 65 = ( x + 6 ) × ( x -2 )
⇒65 = x² + 4x -12
⇒x² + 4x - 77 = 0
⇒x² + 11x - 7x - 77 = 0
⇒ x( x+ 11 ) -7 ( x + 11 ) =0
⇒ ( x+ 11) ( x - 7) = 0
⇒ x = -11 or x = 7
Dimensions can not be negative.
⇒ x = 7
Length = 7 + 6
= 13 in
Width = 7 - 2
= 5in.
Therefore, the dimensions of the rectangle are 13in and 5in.
learn more about rectangle here
brainly.com/question/8760279
#SPJ4
Simplify. √75/3
5
125
25/3
25
Answer:
[tex] \sqrt{ \frac{75}{3} } = \sqrt{25} = 5[/tex]
constraints aregroup of answer choicesquantities to be minimized in a linear programming model.restrictions that limit the settings of the decision variables.input variables that can be controlled during optimization.quantities to be maximized in a linear programming model.
Constraints are restrictions that limit the settings of the decision variables in a linear programming model.
Constraints in a linear programming model are restrictions that limit the settings of the decision variables, which are input variables that can be controlled during optimization.
These decision variables are often defined by specific quantities to be maximized or minimized in the model.
Therefore, constraints are a group of answer choices or restrictions that must be considered when developing a mathematical model to optimize certain variables or quantities.
to learn more about variables click here:
brainly.com/question/29085898
#SPJ11
(a) Find the t-value such that the area in the right tail is 0. 25 with 9 degrees of freedom.
Answer:
(b) Find the t-value such that the area in the right tail is 0. 01 with 28 degrees of freedom.
Answer:
(c) Find the t-value such that the area left of the t-value is 0. 02 with 6 degrees of freedom. [Hint: Use symmetry. ]
Answer:
(d) Find the critical t-value that corresponds to 90% confidence. Assume 20 degrees of freedom.
Answer:
The t-value is 0.702 if the area on the right tail is 0.25 with 9 degrees of freedom. The t-value is 2.479 if the area in the right tail is 0. 01 with 28 degrees of freedom. The t-value is -2.447 if the area left of the t-value is 0. 02 with 6 degrees of freedom.
To find the t-value such that the area in the right tail is 0.25 with 9 degrees of freedom, we can use a t-table or a calculator with t-distribution functions. Using a t-table with 9 degrees of freedom, we find that the t-value with an area of 0.25 in the right tail is approximately 0.702.
To find the t-value such that the area in the right tail is 0.01 with 28 degrees of freedom, we can again use a t-table or a calculator with t-distribution functions. Using a t-table with 28 degrees of freedom, we find that the t-value with an area of 0.01 in the right tail is approximately 2.479.
To find the t-value such that the area left of the t-value is 0.02 with 6 degrees of freedom, we can use the symmetry property of the t-distribution. Since the t-distribution is symmetric about 0, the t-value such that the area left of it is 0.02 is the same as the t-value such that the area in the right tail is 0.02. Using a t-table with 6 degrees of freedom, we find that the t-value with an area of 0.02 in the right tail is approximately 2.447. Therefore, the t-value such that the area left of it is 0.02 is approximately -2.447.
To find the critical t-value that corresponds to 90% confidence with 20 degrees of freedom, we can use a t-table or a calculator with t-distribution functions. Since we want to find the t-value that has an area of 0.05 in each tail (since the confidence interval is symmetric), we can find the t-value with an area of 0.95 in the middle. Using a t-table with 20 degrees of freedom, we find that the t-value with an area of 0.95 in the middle is approximately 1.725. Therefore, the critical t-value for 90% confidence with 20 degrees of freedom is approximately ±1.725.
To know more about t-value here
https://brainly.com/question/31500815
#SPJ4
For parts a and b​, use technology to estimate the following.
​a) The critical value of t for a ​% confidence interval with df.
​b) The critical value of t for a ​% confidence interval with df.
The critical value of t depends on both the confidence level and the degrees of freedom.
The sample size increases, the degrees of freedom also increase, and the t-distribution approaches the normal distribution.
The z-distribution to find the critical value of z for a given confidence level.
The critical value of t for a given confidence level and degrees of freedom, we can use statistical software or online calculators.
These tools typically provide tables or functions that allow us to look up or calculate the appropriate value.
The critical value of t for a 95% confidence interval with 10 degrees of freedom.
Using an online t-distribution calculator, we can enter the values of the confidence level and degrees of freedom and obtain the result, which in this case is approximately 2.228.
If we want to construct a 95% confidence interval for a sample with 10 degrees of freedom, we would use the formula:
[tex]\bar x \pm t \times (s/\sqrt n)[/tex]
[tex]\bar x[/tex] is the sample mean, s is the sample standard deviation, n is the sample size, and t is the critical value we just obtained.
The critical value of t for a confidence interval, we need to know the confidence level and degrees of freedom, and we can use statistical software or online calculators to obtain the appropriate value.
This value is used in the formula for constructing the confidence interval, which depends on the sample statistics and the size of the sample.
For similar questions on critical value
https://brainly.com/question/31529419
#SPJ11
Country A: 100 computers or 100 units of steel
Country B: 20 computers or 80 units of steel
The table above indicates the production alternatives of two countries, A and B, which produce computers and steel using equal amounts of resources. If both countries always produce at full employment, which of the following statements must be correct
When both countries produce at full employment, Country A should focus on producing computers, and Country B should focus on producing steel. This arrangement allows them to maximize their resources and benefit from trade.
Based on the given production alternatives for countries A and B, the correct statement regarding their production of computers and steel at full employment is:
"Country A has a comparative advantage in producing computers, while Country B has a comparative advantage in producing steel."
Here's a step-by-step explanation:
1. Calculate the opportunity cost for each country:
- Country A: To produce 1 computer, they give up 1 unit of steel (100 computers = 100 units of steel).
- Country B: To produce 1 computer, they give up 4 units of steel (20 computers = 80 units of steel).
2. Identify the comparative advantage:
- Country A has a lower opportunity cost for producing computers (1 unit of steel), so they have a comparative advantage in computer production.
- Country B has a higher opportunity cost for producing computers but a lower opportunity cost for producing steel, so they have a comparative advantage in steel production.
Thus, when both countries produce at full employment, Country A should focus on producing computers, and Country B should focus on producing steel. This arrangement allows them to maximize their resources and benefit from trade.
to learn more about full employment click here:
brainly.com/question/30483563
#SPJ11
calculate the gradient: a stream has 100 feet of elevation change in 2 miles. note: if doing this during an exam, show your calculator to the camera so your instructor understands what you are doing. question 9 options: a) 50 feet/mile b) 2 feet/mile c) .02 feet/mile d) 100 ft/mile
Every mile traveled along the stream, the elevation changes by 50 feet/mile.
The gradient of the stream can be calculated by dividing the elevation change by the distance traveled. In this case, the stream has an elevation change of 100 feet over a distance of 2 miles. Thus, the gradient can be calculated as:
Gradient = Elevation change / Distance traveled
= 100 feet / 2 miles
= 50 feet/mile
The gradient is an important concept in many fields, including geology, hydrology, and civil engineering. It represents the rate at which a physical quantity, such as elevation or temperature, changes with distance. A steep gradient indicates a rapid change, while a gentle gradient indicates a slow change.
Therefore, the answer is option (a) 50 feet/mile. This means that for every mile traveled along the stream, the elevation changes by 50 feet.
To learn more about Gradient here
https://brainly.com/question/30249498
#SPJ4
1. a medical insurance company is analyzing the promptness of its claims department in responding to customer claims. the company has a policy of processing all claims received within five days. in order to determine how well the organization is doing, data were gathered to determine the proportion of time the claims were mailed late. a total of 24 sets of 100 samples each were made from which the proportion of claims that were mailed within the five-day limit was determined. (carry on three decimal points) sample number 1 2 3 4 5 6 7 8 9 10 11 12 number late 12 14 18 10 8 12 13 17 13 12 15 21 sample number 13 14 15 16 17 18 19 20 21 22 23 24 number late 19 17 23 24 21 9 20 16 11 8 20 7 do the data indicate a process is in control? why or why not?
To determine whether the process is in control or not, we can use a control chart. The control chart is a graphical tool used to monitor the stability of a process over time by plotting the sample statistics such as means or proportions over time and comparing them to control limits.
In this case, we are interested in monitoring the proportion of claims that were mailed within the five-day limit. We will use a p-chart, which is a control chart used to monitor the proportion of nonconforming items in a sample.
The formula for the p-chart is:
p = (number of nonconforming items in the sample) / (sample size)
The control limits for the p-chart are:
Upper control limit (UCL) = p-bar + 3sqrt(p-bar(1-p-bar)/n)
Lower control limit (LCL) = p-bar - 3sqrt(p-bar(1-p-bar)/n)
where p-bar is the overall proportion of nonconforming items, n is the sample size, and sqrt is the square root function.
Let's calculate the p-chart for the given data. The total number of samples is 24 and the sample size is 100.
First, we calculate the proportion of claims that were mailed within the five-day limit for each sample:
p1 = 1 - 12/100 = 0.88
p2 = 1 - 14/100 = 0.86
p3 = 1 - 18/100 = 0.82
p4 = 1 - 10/100 = 0.90
p5 = 1 - 8/100 = 0.92
p6 = 1 - 12/100 = 0.88
p7 = 1 - 13/100 = 0.87
p8 = 1 - 17/100 = 0.83
p9 = 1 - 13/100 = 0.87
p10 = 1 - 12/100 = 0.88
p11 = 1 - 15/100 = 0.85
p12 = 1 - 21/100 = 0.79
p13 = 1 - 19/100 = 0.81
p14 = 1 - 17/100 = 0.83
p15 = 1 - 23/100 = 0.77
p16 = 1 - 24/100 = 0.76
p17 = 1 - 21/100 = 0.79
p18 = 1 - 9/100 = 0.91
p19 = 1 - 20/100 = 0.80
p20 = 1 - 16/100 = 0.84
p21 = 1 - 11/100 = 0.89
p22 = 1 - 8/100 = 0.92
p23 = 1 - 20/100 = 0.80
p24 = 1 - 7/100 = 0.93
Next, we calculate the overall proportion of claims that were mailed within the five-day limit:
p-bar = (p1+p2+...+p24)/24 = 0.8575
Then, we calculate the control limits for the p-chart:
UCL = p-bar + 3sqrt(p-bar(1-p-bar)/n) = 0.8992
LCL = p-bar - 3sqrt(p-bar(1-p-bar)/n) = 0.8158
To learn more about the data visit:
brainly.com/question/13650923
#SPJ11
The figure below is made of 222 rectangles
The volume of the figure which has 2 rectangular prisms can be found to be 276 cm ³.
How to find the volume ?To find the volume of this composite figure, you need to find the volume of each of the individual rectangles.
Volume of rectangular prism 1:
= Length x Width x Height
= 10 x 6 x 3
= 180 cm ³
Volume of rectangular prism 2:
= Length x Width x Height
= 4 x 6 x 4
= 96 cm ³
The volume of the entire figure is therefore ;
= 180 + 96
= 276 cm ³
Find out more on volume at https://brainly.com/question/28001137
#SPJ1
Richard’s checkbook register as of 02/19: Check
The ending balance in Richard’s checkbook register is $1,009.81
In starting the amount of Richard has in his account is $900.00
All the amount of money which will be credited or deposit in the account that means the money is added in the account .
Al the amount of money that will be debited or payment from the account will be subtracted from the account .
Credited or deposit = $390.36 + $390.36 + $390.36 + $390.36
Debited or payment = $455.00 + $125.40 + $155.44 + $455.00 + $9.20 + $251.59
Total amount of money left = Base money + credited money - debited money
Total amount of money left = 900 + 1561.44 - 1451.63
Total amount of money left = $1,009.81
To know more about balance click here :
https://brainly.com/question/27154367
#SPJ4
The given question is incomplete the complete question is :
Richard’s checkbook register as of 02/19: Check # Date Description of Transaction Payment/Debit (-) Fee (-) Deposit/Credit (+) Balance 02/03 Deposit $900.00 $900.00 02/05 Deposit - Paycheck $390.36 $1,290.36 201 02/05 Blue Sky Apartments $455.00 $835.36 202 02/07 Renter’s Insurance $125.40 $709.96 203 02/18 Online Clothing Purchase $155.44 $554.52 02/19 Deposit - Paycheck $390.36 $944.88 Enter the following transactions into Richard’s checkbook register and state his ending balance: Date Type Description Amount 03/01 Check #204 Blue Sky Apartments $455.00 03/05 DEP Payroll automatic deposit $390.36 03/08 Debit Benny’s Hamburgers and Fries $9.20 03/15 Check #205 Car payment $251.59 03/19 DEP Payroll automatic deposit $390.36 a. $715.79 b. $1,009.81 c. $780.72 d. $880.24
Above are two different models of the same television. If the screen in the model on the left has a 11-cm diagonal, what is the diagonal of the screen in the model on the right? A. 22 cm B. 44 cm C. 66 cm D. 33 cm Reset Submit Scale Drawings
Answer: C
Step-by-step explanation: I took the test
The question is about scale drawings in mathematics. If the model on the left TV has an 11 cm diagonal, and the right TV is a scaled version twice as large, the diagonal of the right TV would be 22 cm.
Explanation:This question deals with scale drawing relationships. Scale drawings are often used in geometry and mathematics to depict real-life objects at a scale that can be easily studied. When the aspect ratio (the ratio of width to height) remains the same, if one dimension (like the diagonal in this case) of an object is doubled, all other dimensions are also doubled.
So if the television on the left has an 11 cm diagonal, then the television on the right, which is a scaled version in which the diagonal is twice as long, would measure 22 cm diagonally. Hence, the correct option is A. 22 cm.
Learn more about Scale Drawings here:https://brainly.com/question/30771513
#SPJ2
A cuboid has a surface area of 340cm squared. Find 3 integer dimensions that will give the surface area
The length of the cuboid is 10 cm .
Total Surface Area of a Cuboid :As the cuboid has six rectangular faces, the total surface area of the cuboid is calculated as follows: Assume that, l, w, h be the length, width, and height of the cuboid respectively. Therefore, the total surface area of the cuboid is 2 (lh + lw+ hw) square units.
Surface area of cuboid = 340 cm²
∵ Surface area of cuboid = 2(lb + bh + hl)
So,
⇒ 2(lb + bh + hl) = 340
⇒ 2(l × 8 + 8 * 5 + 5 * l) = 340
⇒ 2(8l + 40 + 5l) = 340
⇒ 13l + 40 = 340/2
⇒ 13l + 40 = 170
⇒ 13l = 170 - 40
⇒ 13l = 130
⇒ l = 130/13
⇒ l = 10 cm
Learn more about Surface area if cuboid at:
https://brainly.com/question/26755915
#SPJ1
The given question is incomplete, complete question is:
The surface area of a cuboid is 340 cm2. If its breadth is 8 cm and height is 5 cm, then find its length.
(L1) Given: CM↔ is a perpendicular bisector of AB¯ at point MProve: AC=BC
CM is the perpendicular bisector of AB at M, it means that CM is perpendicular to AB, and AM=BM. Therefore, we have two right triangles, triangle AMC and triangle BMC, with a shared side CM, and AM=BM.
By the Pythagorean theorem, we know that in a right triangle, the square of the hypotenuse (the longest side) is equal to the sum of the squares of the other two sides. Applying this to triangles AMC and BMC, we have:
AC² = AM² + CM²
BC² = BM² + CM²
Since AM=BM, we can substitute AM for BM in the second equation, giving:
BC² = AM² + CM²
Since the left-hand sides of these two equations are equal (by the given that CM is the perpendicular bisector of AB), we can set their right-hand sides equal to each other and simplify:
AC² = BC²
Taking the square root of both sides gives us:
AC = BC
for such more question on perpendicular bisector
https://brainly.com/question/18991632
#SPJ11
For the parametrically defined surface S given by r(u, v) = < sin(v), cos(v), u >, find each of the following differentials In F . dS. dS du dv In f(x, y, z)dS, ds = dudv
For the parametrically defined surface ds = ∫0²π ∫[tex]0^1[/tex] F(sin(v), cos(v), z) dz dv
What is trigonometry?
Trigonometry is a branch of mathematics that deals with the relationships between the sides and angles of triangles.
To find the differentials of the given surface S, we need to first calculate the necessary derivatives:
r_u = <0, 0, 1>
r_v = <cos(v), -sin(v), 0>
We can then use these derivatives to calculate the differential of S:
dS = ||r_u x r_v|| du dv
= ||<cos(v), sin(v), 0>|| du dv
= ||<cos(v), sin(v)>|| du dv
= 1 du dv
Next, we can find the differential of a scalar function F(x, y, z) in terms of the surface S:
dF = ∇F · dS
= <Fx, Fy, Fz> · <cos(v), sin(v), 0> du dv
= Fx cos(v) du dv + Fy sin(v) du dv
Finally, we can use this differential to calculate the integral of F over the surface S:
∫∫S F(x, y, z) dS
= ∫∫S F(r(u,v)) ||r_u x r_v|| du dv
= ∫0^2π ∫0^1 F(sin(v), cos(v), u) du dv
Note that the limits of integration correspond to the range of u and v in the parametric representation of the surface. We can use the substitution u = z to convert the differential from dS to ds:
dS = ||r_u x r_v|| du dv
= ||<cos(v), sin(v), 0>|| du dv
= 1 du dv
ds = ||r_u x r_v|| dz dv
= ||<cos(v), sin(v), 0>|| dz dv
= ||<cos(v), sin(v)>|| dz dv
= 1 dz dv
This gives us:
∫∫S F(x, y, z) dS
= ∫∫S F(r(u,v)) ||r_u x r_v|| du dv
= ∫0²π ∫[tex]0^1[/tex] F(sin(v), cos(v), u) du dv
= ∫0²π ∫[tex]0^1[/tex] F(r(u,v)) ||r_u x r_v|| dz dv
= ∫0²π ∫[tex]0^1[/tex] F(sin(v), cos(v), z) dz dv
To learn more about trigonometry from the given link:
https://brainly.com/question/29002217
#SPJ1
