If an exam was worth 30 points, and your score was at the 60th percentile, then

The phrase that best describes the relationship between the number of miles driven and the amount of gasoline used is "correlated, but not causal." So, the correct answer is B).

While there is a clear correlation between the number of miles driven and the amount of gasoline used (i.e., as the number of miles driven increases, the amount of gasoline used generally increases), this relationship is not necessarily causal.

There may be other factors at play, such as the efficiency of the vehicle, driving habits, and road conditions, that can affect the amount of gasoline used. Therefore, while the two variables are clearly related, it cannot be concluded that one variable causes the other. So, the correct option is B).

To know more about correlation:

https://brainly.com/question/31588111

#SPJ4

--The given question is incomplete, the complete question is given

" Which phrase best describes the relationship between the number of miles driven and the amount of gasoline used?

A) causal, but not correlated

B) correlated, but not causal

C) both correlated and causal

D) neither correlated nor causal"--

Mean of X is 12 and the standard deviation of X is approximately 2.35.

Probability is a branch of mathematics in which the chances of experiments occurring are calculated. It is by means of a probability, for example, that we can know from the chance of getting heads or tails in the launch of a coin to the chance of error in research.

Since each chip has a probability of 0.06 of being defective, the number of defective chips in a sample of 200 follows a binomial distribution with parameters n=200 and p=0.06.

The mean of a binomial distribution is given by μ = np, and the standard deviation is given by σ = √(np(1-p)).

Therefore, for this problem:

μ = np = 200(0.06) = 12

σ = √(np(1-p)) = √(200(0.06)(0.94)) ≈ 2.35

So the mean of X is 12 and the standard deviation of X is approximately 2.35.

Learn more about probability on:

https://brainly.com/question/13604758

#SPJ4

Using the amplitude of the motion, After approximately 0.89 seconds, the bobber will be at the midpoint between its high point and low point for the first time.

The bobber will be at the midpoint between its high point and low point for the first time after 1.5/4 seconds.

To find the answer, we need to first find the amplitude of the motion, which is half of the total distance the bobber travels, so amplitude = 1.5/2 = 0.75 inches.

Next, we can use the formula for the period of a simple harmonic motion: T = 2π√(m/k), where T is the period, m is the mass, and k is the spring constant. In this case, we can use the formula T = 3 seconds.

Solving for k, we get k = (4π²)m/T². Since we don't know the mass of the bobber, we can assume it's negligible and use k = 4π²/T². Plugging in T = 3 seconds, we get k = 4π ²/⁹.

Now we can use the formula for the displacement of a simple harmonic motion at time t: x = Acos(ωt), where A is the amplitude and ω is the angular frequency (ω = 2π/T). We want to find when the displacement x = 0.5A (i.e. the midpoint between the high and low points), so we can solve for t:

0.5A = Acos(ωt)

0.5 = cos(2πt/3)

2πt/3 = arccos(0.5)

t = 3arccos(0.5)/2π

t ≈ 0.89 seconds

So after approximately 0.89 seconds, the bobber will be at the midpoint between its high point and low point for the first time.

Learn more about the amplitude:

https://brainly.com/question/30696138

#SPJ4

The locus of points that are 3 inches from point B is the sphere with center at point B and radius of 3 inches.

To find the locus of points in three-dimensional space that are 3 inches from point B, we can use the definition of a sphere.

A sphere is the set of all points in three-dimensional space that are a fixed distance (called the radius) from a given point (called the center).

Therefore, the locus of points that are 3 inches from point B is the sphere with center at point B and radius of 3 inches. This sphere can be represented by the equation:

[tex](x - Bx)^2 + (y - By)^2 + (z - Bz)^2 = 3^2[/tex]

Where Bx, By, and Bz are the x, y, and z coordinates of point B, respectively.

for such more question on  sphere

https://brainly.com/question/12719729

#SPJ11

Calibration needs to be performed periodically or whenever there is a significant change in the camera's setup, as it may affect the accuracy of the camera's measurements.

The following is an explanation of the same:

1. Place the large cubic frame (4 meters in size) on the road several meters in front of the robot vehicle. This cubic frame will act as a calibration target for the camera.

2. Define the positions of the eight corners of the cubic frame with respect to a world coordinate system. The world coordinate system has its axes parallel to the cube edges, and its origin is at the center of the cube.

3. To calibrate the camera, we need to find the world coordinates of the cube vertices. The vertices of a cubic frame with a 4-meter side length and the origin at the center will have the following world coordinates:

  Vertex 1: (-2, -2, -2)
  Vertex 2: (2, -2, -2)
  Vertex 3: (2, 2, -2)
  Vertex 4: (-2, 2, -2)
  Vertex 5: (-2, -2, 2)
  Vertex 6: (2, -2, 2)
  Vertex 7: (2, 2, 2)
  Vertex 8: (-2, 2, 2)

4. Capture an image of the cubic frame with the camera on the robot vehicle.

5. Use the linear method described in the lectures to determine the relationship between the camera's image coordinates and the world coordinates. This involves estimating the intrinsic and extrinsic parameters of the camera.

6. Once the camera parameters are estimated, you have successfully calibrated the camera of the robot vehicle using a linear method and a cubic frame.

Learn more about linear method here:

brainly.com/question/17121726

#SPJ11

One possible three-dimensional figure that fits this description is a rectangular prism. Another possible option is a cylinder. A third option is a pyramid with a square base.

Based on your question, the three-dimensional figure could be one of the following three options:

1. Cone: If two cross sections are taken parallel to the base, they will both be circles but with different radii, making them similar but not congruent.

2. Pyramid: If two cross sections are taken parallel to the base, they will both be the same shape as the base (e.g., triangles, squares) but with different side lengths, making them similar but not congruent.

3. Frustum: A frustum is a section of a cone or pyramid with the top cut off parallel to the base. The two cross sections taken parallel to the base would be the same shape but with different dimensions, making them similar but not congruent.

Visit here to learn more about rectangular prism brainly.com/question/21308574

#SPJ11

Answer:

13. my answer need to be 20 characters+ soooo

The area should be reported with three significant digits, giving a final answer of 19.5 m².

What is the area of the rectangle?

To find the area of a rectangle, we multiply the length of the rectangle by the width of the rectangle.

When reporting the answer to a mathematical calculation involving multiplication or division,

the answer should be correctly reported with the same number of significant digits as the value in the calculation with the fewest number of significant digits.

This is because the number of significant digits in the result cannot be greater than the number of significant digits in the least precise value used in the calculation.

For example, suppose you want to calculate the area of a rectangle with a length of 5.2 meters and a width of 3.75 meters.

The calculation is as follows:

Area = Length x Width

Area = 5.2 m x 3.75 m

Area = 19.5 m²

In this case, the value with the fewest number of significant digits is 3.75, which has three significant digits.

Therefore, the area should be reported with three significant digits, giving a final answer of 19.5 m².

To learn more about the area of the rectangle visit:

brainly.com/question/2607596

#SPJ4

The statement "There is a 60 percent chance of rain and a 40 percent chance of pure sunshine" illustrates the definition of a probability distribution.

A probability distribution is a function that describes the likelihood of different outcomes in a random event or experiment. It assigns probabilities to each possible outcome, where the probabilities add up to 1 (or 100%).

In the given options, the statement "There is a 60 percent chance of rain and a 40 percent chance of pure sunshine" is a clear example of a probability distribution because it assigns probabilities to two possible outcomes - rain and sunshine - with a total probability of 1. Specifically, the statement is saying that there is a 60% chance of rain and a 40% chance of sunshine. This statement describes the likelihood of different outcomes for the weather, making it an example of a probability distribution.

The other two statements do not illustrate a probability distribution because they only provide information about specific events that have already occurred (i.e., "it rained three-quarters of the day yesterday" and "the sun is shining today and is supposed to shine tomorrow") or possible events that may occur in the future without any mention of their likelihood (i.e., "it may snow either today or tomorrow").

Learn more about probability distribution on:

https://brainly.com/question/31400421

#SPJ4

Answer:

1, for 2 you get y val. 2 = ( 2, 2)

2, for 4 you get val. 3 = ( 4, 3 )

3, for 7 you get y val. 4.5 = ( 7, 4.5 )

4, for 9 you get y val. 5.5 = ( 9, 5.5 )

Answer:  H

Step-by-step explanation:

The rule for a graph to be a function is if there are not 2 points that have the same x.

You can do a vertical line test. If you held up a vertical line(line that goes straight up and down) to both of these curves, across the entire curves(everywhere).  The curves do not hit that vertical line 2 or more times.  

Since both curves pass the vertical line test.  They are both functions.

The assumption about normality is investigated by looking at a qq plot in a t-test. Therefore, the answer is e. normality assumption.

The qqplot helps to assess whether the sample data are normally distributed, which is an important assumption for the t-test to be valid. If the data deviate significantly from normality, then the t-test results may not be reliable.

Therefore, by examining a QQ plot, one can determine whether the data deviate from normality. If the data points in the QQ plot fall close to the diagonal line, it indicates that the data are normally distributed. If the points deviate from the diagonal line, it suggests that the data may not be normally distributed, and further investigation or alternative statistical tests may be necessary.

To know more about  normality assumption.,visit:

https://brainly.com/question/29758934

#SPJ11

Let P_n be the population of fish after n months. Then we have:

P_n = 1.1*P_{n-1} - 80

This is because the population increases by 10% each month, which is equivalent to multiplying by 1.1, and then we subtract the 80 fish lost each month due to all causes of removal.

To find the population of fish after 5 months, we can use the recurrence relation above and apply it recursively:

P_0 = 1000 (given)

P_1 = 1.1*1000 - 80 = 1020

P_2 = 1.1*1020 - 80 = 1062

P_3 = 1.1*1062 - 80 = 1105.8 (rounded down to 1105)

P_4 = 1.1*1105 - 80 = 1150.5 (rounded down to 1150)

P_5 = 1.1*1150 - 80 = 1196.5 (rounded down to 1196)

Therefore, after 5 months, there are 1196 fish in the lake (rounded down to the next lower integer).

Learn more about population here: brainly.com/question/31598322

#SPJ11

The expression to define the width of the roof garden is 2W

A rectangle is a four-sided shape with opposite sides that are parallel and equal in length. The perimeter of a rectangle is the sum of the lengths of all its sides. If we let the width of the rectangle be "w" and the length be "l," then the perimeter is given by the formula:

Perimeter = 2w + 2l

In this problem, we are told that Darcie has 50 meters of railing. We can use this information to set up an equation to find the length of the rectangle. Let the length of the rectangle be "L." Then we have:

2w + 2L = 50

Simplifying this equation, we get:

w + L = 25

Since the roof garden is a rectangle, we know that the perimeter is given by:

Perimeter = 2w + 2L

Let the width of the garden be "W" and the length be "L." Then the perimeter of the garden is given by:

Perimeter = 2W + 2L

Since we want to know how much more railing Darcie needs, we can set up an equation:

2W + 2L - 50 = X

where X is the amount of additional railing Darcie needs.

We can simplify this equation by substituting 2w + 2L = 50:

2W + (2w + 2L - 50) = X

Simplifying further, we get:

2W - 50 + 2w + 2L = X

Since w + L = 25, we can substitute 2w + 2L = 50:

2W - 50 + 50 = X

Simplifying, we get:

2W = X

To know more about perimeter here

https://brainly.com/question/6465134

#SPJ4

Complete Question:

Darcie has 50m of railing. How much more railing does Darcie need so that she can put the railing all the way around the roof garden. Find the expression to define the width of the roof garden.

Let's start by finding the surface area of the parametric surface given by

To find the surface area, we need to evaluate the integral:

where

The surface area can be expressed in terms of a double integral over the parameter domain of the surface, which is the square [0,1] × [0,1]:

First, we need to compute the partial derivatives:

Then, we can compute the cross product:

Finally, we can compute the magnitude of the cross product:

Thus, the surface area of the parametric surface given by

is

Now, to find the surface area of the parametric surface given by

we can use the same method. The partial derivatives are:

The cross product is:

And the magnitude of the cross product is:

Thus, the surface area of the parametric surface given by

is

Therefore, the surface area of the second parametric surface is 2 times the surface area of the first parametric surface, which is 2.

The given parametric surface has a surface area given by 2π.

To find the surface area of the parametric surface given by  with , we need to use the formula for the surface area of a parametric surface:

A = ∫∫ ||(∂f/∂u) x (∂f/∂v)|| dudv

where ||(∂f/∂u) x (∂f/∂v)|| is the magnitude of the cross product of the partial derivatives of the parametric equations, and dudv is the area element in the u-v plane.

For the given parametric surface, we have:

x = u
y = v
z = uv

So, the partial derivatives are:

∂f/∂u = i + vj
∂f/∂v = ui + uk

Taking the cross product, we get:

(∂f/∂u) x (∂f/∂v) = -vj + uuk - vk

Taking the magnitude, we get:

||(∂f/∂u) x (∂f/∂v)|| = √(1 + u² + v²)

So, the surface area is:

A = ∫∫ √(1 + u² + v²) dudv

To evaluate this integral, we can use a change of variables:

x = u
y = v
z = √(1 + u² + v²)

which gives us a surface that is a hemisphere of radius 1. The surface area of a hemisphere is given by:

A = 2πr²

So, in this case, the surface area is:

A = 2π(1)² = 2π

Therefore, the surface area of the parametric surface given by  with  is 2π.

More on parametric surfaces: https://brainly.com/question/28482933

#SPJ11

The kernel and range of each of the linear operators on R3 are:

1) The kernel of L is the zero vector: Ker(L) = {(0, 0, 0)} and the range of L is R³.

2) The kernel of L is the subspace spanned by the vectors (0, 0, 1)ᵀ and the range of L is {(x₁, x₂, 0) | x₁, x₂ ∈ R}.

3) The kernel of L is the entire space R³ and the range of L is span{(1, 1, 1)}.

1) L(x) = (x₃, x₂, x₁)ᵀ

Kernel:

To find the kernel, we need to solve the equation L(x) = 0. In this case, we have:

x₃ = 0

x₂ = 0

x₁ = 0

So, the kernel of L is the zero vector: Ker(L) = {(0, 0, 0)}.

Range:

Look at the vectors that we can get when we apply L to some x from R³.

When we apply L(x), we get a vector with 3 coordinates - x₃, x₂, and x₁.

So, the range is all vectors in R³ where the third coordinate can be any real number and the same with the first and second coordinates

Thus, the range of L is Range(L) = R³.

2) L(x) = (x₁, x₂, 0)ᵀ

Kernel:

We shall solve the equation L(x) = 0:

x₁ = 0

x₂ = 0

0 = 0 (always true)

So, the kernel of L is the space formed by all the vectors that can be obtained by spaning the vector (0, 0, 1)ᵀ.Ker(L) = span{(0, 0, 1)}.

Range:

We shall find the vectors that can be got as L(x) for some x ∈ R³.

Since the third coordinate of L(x) is 0, the range of L consists of all vectors in R³ where the third coordinate is always 0.

Therefore, the range of L: Range(L) = {(x₁, x₂, 0) | x₁, x₂ ∈ R}.

3) L(x) = (x₁, x₁, x₁)ᵀ

Kernel:

To find the kernel, solve the equation L(x) = 0. We have:

x₁ = 0

x₁ = 0

x₁ = 0

So the kernel of L is the entire space R³: Ker(L) = R³.

Range:

To determine the range, we find the vectors that can be obtained as L(x) for some x ∈ R³.

In this case, we see that the range is made up of all vectors where all coordinates are the same, i.e., a scalar multiple of (1, 1, 1)ᵀ.

Therefore, the range of L is Range(L) = span{(1, 1, 1)}.

Learn more about vectors at brainly.com/question/1615741

#SPJ4

the expected value of the prize is $54.50. Therefore, the fair price for the game should be $54.50 or less to ensure that the game is not rigged against the player.

What is probability?

By simply dividing the favorable number of possibilities by the entire number of possible outcomes, the probability of an occurrence can be determined using the probability formula. Because the favorable number of outcomes can never exceed the entire number of outcomes, the chance of an event occurring might range from 0 to 1.

Let's first find the probability of each outcome:

Probability of drawing a prize worth $4 = 2/4 = 1/2 (since there are 2 prizes worth $4 out of a total of 4 prizes)

Probability of drawing a prize worth $10 = 1/4 (since there is only 1 prize worth $10 out of a total of 4 prizes)

Probability of drawing a prize worth $200 = 1/4 (since there is only 1 prize worth $200 out of a total of 4 prizes)

Now, we can calculate the expected value:

Expected value = (1/2)($4) + (1/4)($10) + (1/4)($200)

Expected value = $2 + $2.50 + $50

Expected value = $54.50

So the expected value of the prize is $54.50. Therefore, the fair price for the game should be $54.50 or less to ensure that the game is not rigged against the player.

Learn more about probability, by the following link.

brainly.com/question/24756209

#SPJ4

The solutions to the equation x² = 16 are x = 4 and x = -4.

What is equation?

An equation is a statement in mathematics that states the equality of two expressions. It usually consists of variables, which are represented by letters and can take on different values, as well as constants and mathematical operations like addition, subtraction, multiplication, division, and exponentiation.

To solve x² = 16, we need to find the value of x that makes the equation true.

One way to solve this equation is to take the square root of both sides. However, it's important to remember that the square root of a number can be positive or negative, so we need to include both solutions:

√x² = √16

|x| = 4

x = ±4

Therefore, the solutions to the equation x² = 16 are x = 4 and x = -4.

To learn more about equation visit:

https://brainly.com/question/29174899

#SPJ4

If a carpet leaves a uniform margin of "x" meters around it, then the value of x is 1.

The dimensions of the carpet are 5 meter by 3 meter,

If the carpet leaves a "uniform-margin" of "x" meter, around it,

which means that, the length of the room is = 5 + x + x = (5+2x) meter,

The width of the room is = 3 + x + x = (3+2x) meter,

So, Area of the margin is = 20 meter square, and is calculated as :

Area of Margin is = (Area of room) - (Area of Carpet);

Substituting the values,

We get,

⇒ 20 = (5+2x)(3+2x) - 15;

⇒ 35 = (5+2x)(3+2x);

⇒ 35 = 15 + 10x + 6x + 4x²,

⇒ 35 = 15 + 16x + 4x²,

⇒ 0 = 4x² + 16x - 20,

⇒ 4x² + 16x - 20 = 0

⇒ 4x² + 20x - 4x - 20,

⇒ 4x(x+5) -4(x+5) = 0,

⇒ (4x-4)(x+5) = 0

⇒ 4x = 4   or    x = -5,

⇒ x = 1  or x = -5, since the length cannot be in negative,

Therefore, the value of "x" is 1.

Learn more about Area here

https://brainly.com/question/30495520

#SPJ4

The given question is incomplete, the complete question is

EFGH is a rectangular floor of a room in which a carpet 5m by 3m is laid, leaving a uniform margin of x meters round it. If the total area of the margin is 20m square find the value of x​.

Yes, the diagonals of a parallelogram bisect each other as well as the angles they intersect. This means that each diagonal divides the parallelogram into two congruent triangles and each angle formed by the intersection of the diagonals is bisected into two equal angles.

The diagonals of a parallelogram have the following properties :

They bisect each other, meaning they divide each other into two equal parts.

They do not bisect the angles of the parallelogram, meaning they do not divide the angles into two equal parts, except in some special cases such as a rectangle or a rhombus.

They divide the parallelogram into two congruent triangles, meaning the triangles have equal sides and angles.

So, the answer to your question is no, the diagonals of a parallelogram do not bisect the angles in general. However, if the parallelogram is a rectangle or a rhombus, then the diagonals do bisect the angles

to learn more about parallelogram click here:

brainly.com/question/8700864

#SPJ11

Using differentials both answers, rounded to four decimal places, are 214.9203.

To use differentials to approximate the value of [tex](5.99)^3[/tex], we will follow these steps:

1. Choose a point close to 5.99, where the function is easy to evaluate. We'll use 6 as our point.
2. Find the differential of the function y = [tex]x^3[/tex], which is dy = [tex]3x^2[/tex]dx.
3. Evaluate the differential at the chosen point, x = 6.
4. Determine the change in x, which is dx = 5.99 - 6 = -0.01.
5. Use the differential to approximate the change in y, which is dy ≈ [tex]3(6)^2[/tex](-0.01).
6. Add the change in y to the value of the function at the chosen point to approximate the value of the expression.

Following these steps:

1. Chosen point: x = 6.
2. Differential: dy = 3[tex]x^2[/tex] dx.
3. Evaluating the differential at x = 6: dy = [tex]3(6)^2[/tex] dx = 108 dx.
4. Change in x: dx = -0.01.
5. Change in y: dy ≈ 108(-0.01) = -1.08.
6. Approximate value of the expression: [tex](6^3)[/tex]+ (-1.08) = 216 - 1.08 = 214.92.

Thus, using differentials, we approximate the value of [tex](5.99)^3[/tex] to be 214.92.

For comparison, using a calculator: [tex](5.99)^3[/tex] ≈ 214.9203.

To learn more about differentials, refer here:

https://brainly.com/question/24898810#

#SPJ11

Statistical literacy refers to the ability to understand and interpret statistical information, such as confidence intervals, in a meaningful way. In this context, we are discussing the confidence interval for predicted values of y at a fixed confidence level, and how it changes as the corresponding x values move further away from the mean of x.

To answer your question, as the corresponding x values become further away from the mean of x, the length of the confidence interval for predicted values of y will generally increase. This occurs because the uncertainty associated with the prediction increases as you move further from the center of the data distribution. In other words, the further away an x value is from the mean, the less precise the predicted y value will be.

In summary, when discussing statistical literacy in the context of confidence intervals, it's important to understand that the length of the confidence interval for predicted values of y will typically increase as the corresponding x values move further away from the mean of x. This is due to the increased uncertainty associated with predictions at these more extreme x values.

Learn more about Statistical literacy here: brainly.com/question/19053752

#SPJ11

The purpose of hypothesis testing is to draw conclusive decisions about sample estimates given the evidence from the sample.

It helps us to test whether our assumptions about a population are supported by the data from a sample. Hypothesis testing allows us to draw conclusions about some characteristics of the population based on the information gathered from a sample. This process is important because it helps us to make informed decisions based on the available evidence. Additionally, hypothesis testing helps to ensure that the sample is scientifically drawn from the target population, which is important for generalizing the findings to a larger group.
The purpose of hypothesis testing is to draw conclusions about some characteristics of the population by testing a hypothesis, making conclusive decisions based on sample evidence, and evaluating whether the sample is scientifically drawn from the target population.

Visit here to learn more about conclusive decisions:

brainly.com/question/31022495

#SPJ11

Answer: 126 outfits

Step-by-step explanation: multiply all the numbers above

Step-by-step explanation:

Multiply all of the choices

  2 x 3 x 7 x 3 = 126 outfits

The composite trapezoidal rule is a second-order accurate method, meaning that the error in the approximation is proportional to h², where h is the width of the subintervals.

What is function?

In mathematics, a function is a relationship between two sets of elements, called the domain and the range, such that each element in the domain is associated with a unique element in the range.

The composite trapezoidal rule is a numerical integration method used to approximate the value of a definite integral of a function f(x) over a given interval [a, b].

The general form of the definite integral for which the composite trapezoidal rule is applicable is:

∫[a,b] f(x) dx

The formula for the segment width is:

h = (b - a) / n

where n is the number of subintervals.

The general formula for the composite trapezoidal rule is:

∫[a,b] f(x) dx ≈ h/2 [f(a) + 2f(a+h) + 2f(a+2h) + ... + 2f(b-h) + f(b)]

where h is the width of each subinterval.

To use this formula, we first divide the interval [a, b] into n subintervals of equal width h, and then apply the trapezoidal rule to each subinterval. The resulting approximation is the sum of the areas of the trapezoids formed by the function f(x) and the x-axis over each subinterval.

Note that the composite trapezoidal rule is a second-order accurate method, meaning that the error in the approximation is proportional to h², where h is the width of the subintervals.

To learn more about functions from the given link:

https://brainly.com/question/12431044

#SPJ1

3.1% To find the point estimate of the difference in the population proportion in Vermont and Hawaii, follow these steps:

1. Convert the percentages to proportions: Vermont had 65.3% who said yes, which is 0.653 as a proportion. Hawaii had 62.2% who said yes, which is 0.622 as a proportion.

2. Calculate the point estimate by finding the difference between the two proportions: 0.653 - 0.622 = 0.031.

The point estimate of the difference in the population proportion in Vermont and Hawaii is 0.031. This means that, based on the survey, the proportion of people who exercised more than 30 minutes a day for three days out of the week in Vermont was 3.1% higher than in Hawaii.

To know more about estimated click here

brainly.com/question/28338974

#SPJ11

(a) The point estimate of p is approximately 0.3945.

(b) To find 90% and a 95% confidence intervals for p the sample size is not provided in the question.

(c)  To estimate p within 0.04 of the unknown p with 90% confidence, a sample size of approximately 83,270

(a) The point estimate of p, denoted as ˆp, is the proportion of infected birds in the sample. In this case, out of the 137 examined birds, 54 were infected. Therefore, the point estimate is:

ˆp = Number of infected birds / Total number of examined birds = 54 / 137 ≈ 0.3945

So, the point estimate of p is approximately 0.3945.

(b) To find the confidence intervals for p, we can use the formula for a confidence interval for a proportion:

ˆp ± z * sqrt( ˆp(1 - ˆp) / n )

where ˆp is the point estimate, z is the critical value for the desired confidence level, sqrt is the square root, and n is the sample size.

For a 90% confidence interval, the critical value z is approximately 1.645.

90% confidence interval:

ˆp ± 1.645 * sqrt( ˆp(1 - ˆp) / n )

For a 95% confidence interval, the critical value z is approximately 1.96.

95% confidence interval:

ˆp ± 1.96 * sqrt( ˆp(1 - ˆp) / n )

To calculate the confidence intervals, we need to know the sample size (n). However, the sample size is not provided in the question.

(c) To determine the sample size (n) for a desired margin of error (0.04) and a 90% confidence level, we can use the formula:

n = (z^2 * ˆp(1 - ˆp)) / (E^2)

where z is the critical value for the desired confidence level, ˆp is the point estimate, and E is the margin of error.

Plugging in the values:

n = ([tex]1.645^2[/tex] * 0.3945(1 - 0.3945)) / ([tex]0.04^2[/tex])

n ≈ 133.2325 / 0.0016

n ≈ 83,270

Therefore, to estimate p within 0.04 of the unknown p with 90% confidence, a sample size of approximately 83,270 would be required.

To learn more about estimate, refer here:

https://brainly.com/question/17961193#

#SPJ11

Answer: There is nothing there

Step-by-step explanation:

Answer:

their it is nothing their

Approximately 47.5% of data on a normal distribution is less than the mean while being within two deviations of the mean.

For a normal distribution, we know that about 68% of the data falls within one standard deviation of the mean on either side. This means that approximately 34% of the data falls between one and two standard deviations from the mean. Since the normal distribution is symmetrical, we can assume that half of this 34% falls to the left of the mean, which gives us 17%.

Then, we add this to the 34% that falls within one standard deviation of the mean on either side to get 51% of the data within two standard deviations of the mean. Since the normal distribution is continuous, we round to the nearest tenth of a percent, which gives us approximately 47.5%.

Therefore, approximately 47.5% of the data on a normal distribution is less than the mean while being within two deviations of the mean.

To learn more about deviations here

https://brainly.com/question/14747159

#SPJ4