If n1 = n2 and n is relatively large, then the t test is relatively robust against violations of the assumptions of homogeneity of variance and normality. (Option A)
A t-test refers to an inferential statistic which is used to determine if there is a significant difference between the means of two groups and how they are related. According to the studies, t tests are remarkably robust to violations of a number of assumptions providing that the two sample sizes are equal or nearly equal and the assumed underlying population distributions are of the same or nearly same shape. T-test are found to be robust against deviation from normality and unequal variance. The test is in doubt only when there can be serious outliers, when sample sizes are small, and distributions are far from normal.
Note: The question is incomplete as it is missing options which are A) violations of the assumptions of homogeneity of variance and normality B) violations of random samples C). traffic violations D) violations by the forces of evil.
Learn more about T-test:
https://brainly.com/question/13800886
#SPJ4
what is the average magnitude of the poynting vector 4.00 mi from a radio transmitter broadcasting isotropically (equally in all directions) with an average power of 260 kw?
307.4 μW/m² average magnitude of the pointing vector 4.00 mi with an average power of 250 kw
Power is produced when a force causes a displacement. Power has no bearing on how long it takes for a force to cause a displacement. The process's pace might range from swiftly concluding to taking some time.
For example, it takes an abnormally long time for a rock climber to elevate her body a few meters over the cliff's edge. On the other hand, a trail hiker may swiftly raise her body a few meters if she selects the faster path up the mountain. Despite making the same amount of work, the hiker completes the task far quicker than the rock climber..
S-average=power/area
power=260 kw
area=4π(8045)²
S-average=260/4π(8045)²
S-average=307.4 μW/m²
Therefore, the average magnitude with average power of 260 W is 307.4 μW/m²
To know more about power visit : brainly.com/question/11800127
#SPJ4
the law of reflection states that when light rays reflect off a surface the angle of incidence a. is one-half the angle of reflection. c. is twice the angle of reflection. b. equals the angle of reflection. d. equals the angle of refr
The law of reflection states that when light rays reflect off a surface the angle of incidence is equal to the angle of reflection.
The process by which light rays strike a surface and are reflected back is called light reflection.
The laws of reflection is the principle or rule that governs the phenomenon of light reflection.
The law of reflection states that a ray of light will bounce off a surface at the same angle at which it struck it when it comes into contact with it. The angle at which the light ray strikes the surface is known as the angle of incidence and the angle at which the light ray reflects from the surface is known as the angle of reflection. The law can also determine how the light beam will behave.Therefore according to the law of reflection, the angle of incidence is always equal to the angle of reflection.
To know more about law of reflection,
https://brainly.com/question/18556561
#SPJ4
g a photon with an energy of 8.61 ev is absorbed by a metal that has a work function of 5.75 ev, resulting in the ejection of an electron. what is the maximum kinetic energy of the electron in ev?
The maximum kinetic energy of the electron in ev is 2.86 ev.
We know the relation between energy, work function and maximum kinetic energy as,
E = W + KE max -----(1)
where, E is the energy absorbed
W is the work function
KE max is the maximum kinetic energy
It is also known as photoelectric equation.
Given that,
E = 8.61 ev
W = 5.75 ev
KE max = ?
By substituting the above values in equation (1), we have
8.61 = 5.75 + KE max
KE max = 2.86 ev
Thus, the maximum kinetic energy of the electron in ev is 2.86 ev.
To know more about kinetic energy:
https://brainly.com/question/16413379
#SPJ4
Why does the Sun emit neutrinos? Solar flares create neutrinos with magnetic fields_ Convection releases neutrinos, which random walk through the radiation zone. The Sun does not emit neutrinos Neutrinos are a by-product of fusion in the Sun's core in step of the p-p process
The Sun emit neutrinos because of the fusion in the Sun's core creates neutrinos.
Most of the neutrinos that are currently flowing through you came from the sun. Every second, a hundred billion solar neutrinos travel through our fingernail.
Nuclear fusion occurs in the sun, where it results in the creation of neutrinos. Protons, the nucleus of the most basic element, hydrogen, combine during fusion to create helium, a heavier element.
As a result, neutrinos and energy are released, which will eventually manifest on Earth as light and heat.
These solar neutrinos represent an overall energy emission from the Sun of about 1%. Every second, the Sun emits 1038 neutrinos, each carrying 4 1024 W of electricity.
The sun's core can also be directly understood through the use of solar neutrinos. Unexpectedly, neutrinos generated in the sun's core reach to
Earth before light from the sun (formed in the same reaction), something we would not expect. This isn't because neutrinos can move more quickly than light since they can't.
Neutrinos encounter with matter so infrequently that they are able to immediately depart the sun's dense core, whereas photons (the light particles) bounce around before breaking free.
To know more about neutrinos, visit:
https://brainly.com/question/29678174
#SPJ4
consider the above graphs of the hip sagittal angle during the stance phase of running and answer the following questions a. what is the angular displacement for the hip joint from on to off? b. what is the largest angular velocity of the hip joint and is it a flexion or extension velocity? c. what is the largest extension torque of the hip and where in the movement does this occur? d. what is the largest flexion torque of the hip and where in the movement does this occur? e. at the peak extension torque, what muscles produce this torque and is it a concentric or eccentric contraction? f. at the peak flexion torque, what muscles produce this torque and is it a concentric or eccentric contraction?
a. The hip joint's angular displacement from on to off is 49.1°.
b. The hip joint's maximum angular velocity is 55.4°/s, and it is a flexion velocity.
c. The muscles gluteus medius, gluteus maximus, and semitendinosus provide the maximum extension torque of the hip at 50% of the movement. It is a concentric contraction.
d. The muscle known as biceps femoris long head produces the maximum flexion torque of the hip at the 75% mark of the exercise. It's an eccentric contraction.
e. The gluteus medius, gluteus maximus, and semitendinosus all contribute to the peak extension torque, which is a concentric contraction.
F. Eccentric contraction of the biceps femoris long head causes the maximum flexion torque.
What is angular velocity?
Angular velocity is the rate of change in the angle between two bodies or the pace at which an item revolves or rotates around an axis. This displacement in the illustration is shown as the angle between a line on one body and a line on the other.
To know more about angular velocity, check out https://brainly.com/question/20432894
#SPJ4
reservoirs used to produce electricity, canals used for transportation, and lakes used for recreation are examples of water with uses.
Types of water with "Multiple" applications include reservoirs that generate power, canals that are used for transportation, as well as lakes that are utilized for recreation.
Explain the term reservoirs?A reservoir is a man-made lake used to store water. The majority of reservoirs are created by building dams across rivers.
A naturally lake whose outflow has been blocked to regulate the water level can likewise be converted into a reservoir.Flood risk control is reservoirs' most important function. Reservoirs store water during periods of heavy rain, lowering the risk of flooding, then gradually release the water over the ensuing weeks and months.Using the potential energy of water to produce electricity, a hydroelectric reservoir is a sizable gathering of water behind the same hydroelectric dam. The dam holds back some of this water, and when energy is needed, a little amount is permitted to flow through the base of the dam.Thus, types of water with "Multiple" applications include reservoirs that generate power, canals that are used for transportation, as well as lakes that are utilized for recreation.
To know more about the reservoirs, here
https://brainly.com/question/6989261
#SPJ4
The complete question is-
reservoirs used to produce electricity, canals used for transportation, and lakes used for recreation are examples of water with ______ uses.
what experimental evidence would lead to the student to conclude that free fall acceleration is constant acceleration
The distance fallen is proportional to the square of the falling time.
A graph of velocity vs. time is linear.
What is acceleration?In mechanics, acceleration is the rate at which an object's velocity with respect to time changes. Vector quantities include accelerations. The direction of the net force imposed on an object determines its acceleration in relation to that force. acceleration is the rate of change in both speed and direction of velocity over time.When anything moves faster or slower in a straight line, it is said to have been accelerated. Because the direction is always shifting, motion on a circle accelerates even while the speed is constant.The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t).The distance fallen is proportional to the square of the falling time.
A graph of velocity vs. time is linear.
The complete question is,
A student conducts an investigation into the motion of a car that accelerates from rest on a straight, level roadway. A driver operating the car causes the car to speed up from rest at time t = 0 and the student makes measurements of the distance traveled and the speed of the car every second. What experimental evidence would support the conclusion that the car's acceleration is uniform? Select two answers.
To learn more about Acceleration refer to:
https://brainly.com/question/460763
#SPJ4
If you thrust a magnet into a closed loop of wire, the loop will
a.rotate
b.have current in it
c.both of the above
d. none of the above
If you thrust a magnet into a closed loop of wire, the loop will have current in it. So the correct option is B.
What is a magnet?A magnet is a body with a magnetism that can attract different irons that can be given naturally or artificially. Magnets can have their magnetic field continuously and this field can attract materials or repel them, this will depend on the magnetic permeability of the compound. The magnetic field of the images will be oriented towards the south pole and the north pole and each of these will be attracted by their opposites.
Not all magnets have permanent magnetism, this depends on whether they are going to be magnetized to be permanent or if they will only have temporary functionality.
By pushing a magnet in a closed circuit of wire, a magnetic field will be generated in which a current will flow in the turns of wire.
Therefore, we can confirm that the correct option is B. have current in it.
To learn more about magnets visit: https://brainly.com/question/2841288
#SPJ1
a tire has a tread pattern with a crevice every 2.25 cm. each crevice makes a single vibration as the tire moves. what is the frequency (in hz) of these vibrations if the car moves at 27.2 m/s?
The each crevice makes a single vibration as the tire moves. what is the frequency (in hz) of these vibrations if the car moves at 27.2 m/s Frequency =1208.9 Hz
From the question, we have
speed = 27.2 m/s = 2720 cm/s
The tire has a tread pattern with a crevice every 2.25 cm
frequency = 2720/2.25
=1208.9 Hz
Frequency :
The quantity of waves that pass a set location in a predetermined period of time is known as frequency. Therefore, if a wave passes through in half a second, the frequency is 2 per second. The frequency is 100 times per hour if it takes 1/100 of an hour. The frequency of the wave is the sum of all waves generated in a second. Frequency is the measure of how many vibrations occur per second. Here is a straightforward illustration: The frequency of the waves will be 5 hertz (Hz) or 5 cycles per second if five full waves are created in one second.
To learn more about frequency visit: https://brainly.com/question/14316711
#SPJ4
the direction of the force of sliding friction is always select one to that of velocity of the object and is select one static friction.
The direction of the force of sliding friction is always that of velocity of the object.
What is Static friction?Moving against the surface's normal, the force of sliding friction acts in a direct proportion to the weight.
Sliding or kinetic friction is the resistance to the actual relative sliding motion between two surfaces in contact.Let's start by learning about frictional forces from a basic understanding. If a metal block is on a table, it might not move in response to a weak force.
The metal block begins to move as the force is gradually increased.The resistive force provided by the metal block in its static form is the same as the controlling value of the force at which the metal block begins to move.Static Friction is the name given to this resistive force. The metal block starts to budge as the experiment continues and the force is increased.Moving against the surface's normal, the force of sliding friction acts in a direct proportion to the weight. In particular, if the surface on which the body slides is horizontal, the normal force will be equal to the object's weight.
Thus, F = u tanα
To find more about Static Friction,
brainly.com/question/13000653
#SPJ1
a long, straight wire extends into and out of the screen. the current in the wire is
In the given scenario, the current is out of the screen following the right-hand rule. (Option A)
According to the figure provided the compass needle rotates in a counter-clockwise direction. The right-hand rule could be used to determine the direction of the magnetic field at the specific location. The right-hand rule states that to determine the direction of the magnetic force on a positive moving charge, point your right thumb in the direction of the velocity (v), your index finger in the direction of the magnetic field (B), and your middle finger will point in the direction of the resulting magnetic force (F). Hence, point the thumb in the direction that current is flowing and then curl the fingers around the line. Magnetic field direction will be indicated by the curling of fingers. Because the direction of rotation for the compass needle is in the opposite direction to clockwise, it would be counter- clockwise for the magnetic field direction. Hence, the current is out of the screen.
Note: The question is incomplete as it is missing options which are A) Out of the screen. B) There is no current in the wire. C) Into the screen. D) There is not enough information to tell the direction.
Learn more about Right-hand rule:
https://brainly.com/question/16979841
#SPJ4
500 joules of heat is absorbed by a system that does 200 j of work on its surroundings. 1) what is the change in the internal energy of the system? (express your answer to one significant figure.)
The change in the internal energy of the system is 3 *10^2 J
Work is done by system.
Hence work is negative.
Change in internal energy=500-200 = 300=3 *10^2 J
law of conservation Energy:
The law of conservation of energy states that energy is neither created nor destroyed, and can only be converted from one form of energy to another. This means that the same amount of energy is always available in the system unless supplied externally. This is especially confusing for non-conservative forces where the energy is converted from mechanical to thermal but the total energy remains the same. The only way to use energy is to convert it from one form to another.
The energy content of each system is determined by the formula:
UT=Ui+W+Q
where;
.UT is the total internal energy of the system.
.Ui is the initial internal energy of the system.
.W is work done by or on the system.
.Q is the heat added to or removed from the system. It is also possible to determine the change in internal energy of the system using the
equation: ΔU=W+Q
This is also a statement of the first law of thermodynamics.
Learn more about enregy here:
https://brainly.com/question/166559
#SPJ4
In a mechanical wave, the restoring force is the force that actually causes the oscillation. In which direction does a restoring force act?
A. opposite the direction of the propagation
B. opposite the direction of the displacement from equilibrium.
C. in the same direction as the displacement from equilibrium.
D. in the same direction as the propagation
The correct option B. opposite the direction of the displacement from equilibrium, is the direction of the restoring force.
Explain the propagation of the mechanical wave?Mechanical waves that move through a solid, liquid, or gas with a wave speed that is influenced by the elastic and inertial characteristics of that medium.
Mechanical waves can move in either longitudinal waves or transverse waves, which are the two most common wave motions.For a mechanical wave to propagate, the medium's elastic and inertial properties are crucial.A disruption or vibration in matter, if solid, gas, liquid, or plasma, is what generates mechanical waves. A medium is described as material through which waves are propagating. Sound waves are created by vibrations in a gas, while water waves are created by vibrations inside a liquid (air).Thus, the force that returns an object to its equilibrium position is known as the restoring force; it is denoted by a negative sign since its direction of action is the opposite of that of the displacement.
To know more about the mechanical wave, here
https://brainly.com/question/26116832
#SPJ4
Two economists agree that labor market discrimination against certain workers unfairly leads to lower wages for the disfavored group. Economist X argues that government intervention is most likely necessary to eliminate this unfair treatment, whereas Economist York argues that the best solution to the unfair treatment is to let the market work to eliminate it on its own.
Economist Y is most likely to be correct when labor and product markets are highly competitive and the lower wages of the disfavored group result from:
A. Differences in human capital
B. Statistical discrimination
C. Discrimination by employers
Answer: C. Discrimination by employers
Explanation:
Economist Y is most likely to be correct when labor and product markets are highly competitive and the lower wages of the disfavored group result from discrimination by employers.
option C is the correct answer.
What is labor discrimination?
Discrimination in the workplace happens when an employer treats his or her employee unfairly or unequally because of specific characteristics.
Labor market discrimination against certain workers unfairly leads to lower wages for the disfavored group.
Example of labor market discrimination include the following;
when an employee is fired, when an employee is demoted, or when an employee is denied promotion due to some unjustified causeAccording economist Y, government intervention cannot eliminate this unfair treatment since it is caused by the market (employers) and the best solution to the unfair treatment is to let the market (employers) work to eliminate it on its own.
Thus, economist Y is correct because this discrimination is caused by the market (employers).
Learn more about labor market discrimination here: https://brainly.com/question/22971284
#SPJ1
a 5.00-m-long ladder, weighing 200 n, rests against a smooth vertical wall with its base on a horizontal rough floor, a distance of 1.20 m away from the wall. the center of mass of the ladder is 2.50 m from its base, and the coefficient of static friction between the ladder and the floor is 0.200. how far up the ladder, measured along the ladder, can a 600-n person climb before the ladder begins to slip?
When a 5.00 m-long ladder, with all weighing of 200 n, rests among a smooth vertical type of wall, then the ladder, will be measured among the the height = 0.488 m.
If θ be the angle ladder makes with the plane
cos θ = 1.2 / 5
Tan θ = 4.04
Let the height a person of weight 600 N can climb be h from the ground .
Distance from the base point where ladder touches the floor = h / tanθ
= h / 4.04
Total reaction force = total downward force
R = 200 + 600
800 N
Frictional force = μ R
= .2 x 800
= 160 N
Taking moment of force about the point on the ladder where it touches the floor and balancing them
= 200 x 1.2 x .5 + 600 x h / tanθ = μ R x 1.2 / tanθ ( reaction at the top point of ladder where it touches the wall is R₁ and R₁ =μ R )
= 200 x 1.2 x .5 + 600 x h / tanθ = 160 x 1.2 / tanθ
120 - 600 h / 4.04 = 47.52
120 - 47.52 = 600 h / 4.04
72.48= 148.51 h
h = 0.488 m
To learn more about friction, refer: brainly.com/question/24338873
#SPJ4
Which of the following, if eliminated, would completely prevent the greenhouse effect from occurring on earth?
A. Chlorofluorocarbons (Incorrect)
B. Clouds (Incorrect)
C. Fossil fuels (Incorrect)
D. Acid rain
E. The ozone layer
F. Atmosphere
The green house gases can be reduced up to a limit by eliminating the fossil fuels and chlorofluorocarbons. Fossil fuels are the major source of greenhouse gases.
What are green house gases?Greenhouse gases are those which are capable of intense absorption of the temperature radiated from the earth's surface and make the earth atmosphere warm up.
Greenhouse gases are the main cause of global warming. Carbon dioxide, methane oxides of nitrogen and sulphur are the green house gases.
Fossil fuels are rich in hydrocarbons and they release these gases when burned. Mainly methane and other hydrocarbon gases intensely absorbs the temperature which is radiating away from the earth and thus the heat is trapped inside.
Therefore, by eliminating fossil fuels, greenhouse effect can be prevented.
To find more on greenhouse effect, refer here:
https://brainly.com/question/13706708
#SPJ1
suppose a guitar string has a resonant frequency of 329.6 hz and a q of 632. after you pluck the string, how many periods of oscillation would it take for the energy of the vibrating string to decay by a factor of e? how many seconds will that take?
It would take 100.6 periods of oscillations for the energy of vibrating string to decay in 0.305 seconds.
Resonance is defined as a system's tendency to vibrate with increased amplitude when frequencies are excited. The maximum frequency at which the amplitude is relatively maximum is referred to as the resonance frequency or resonant frequency. The sharpness of the resonance is defined by the Q factor.
Given,
resonant frequency, f = 329.6 Hz
Quality factor , Q = 632
We know that that quality factor is equal to [tex]2\pi[/tex] .i.e [tex]Q=2\pi[/tex]
then, for 2 periods of oscillations , the energy of vibrating string to decay by factor of 'e' be
[tex]Q=2\pi n\\\\632=2\pi n\\\\n=\frac{632}{2\pi}\\\\n=100.63[/tex]
then, the time elapsed can be determined by,
[tex]f=\frac{n}{T}\\\\329.6=\frac{100.63}{T}\\\\T=\frac{100.63}{329.6}=0.305s[/tex]
Thus, the energy of a vibrating string would decay in 0.305 seconds after 100.6 oscillations.
To learn more about oscillations refer here
https://brainly.com/question/29306627
#SPJ4
If we have a new moon today, when we will have the next full moon?
in about 6 months
in about a month
in about 2 weeks
in about 1 week
If we have a new moon today, we will have the next full moon in about 2 weeks.
What is the time difference between a new moon and the next full moon?The midpoint of the cycle (half of 30 = 15) is marked by the full Moon, which occurs approximately 15 days (14.8 to be exact) following the new moon. Similar to the New Moon phase, the Moon is once again in alignment with the Earth and Sun during full moon.
However, this time, the Moon is on the other side of the Earth, thus the full area of the Moon that is illuminated by the Sun is facing us. Immediately following this brief interval, visibility starts to decline.
Learn more about Moon here:
https://brainly.com/question/15024267
#SPJ1
Question 25 What major factor explains the quick adoption of new programs?O One political party supports the program.O The media draws attention to the particular issue. O The public does not hold a very strong opinion on the issue. O There are many interest groups active on both sides of the policy. O The public holds wide enthusiasm for a program. Question 18 1 p What is an important difference in our current political system compared to when the Constitution was created and ratified?O National leaders were only beholden to their own consciences in the past. O National leaders were more careerist and served in the legislature for several decades in the earlier era. O Politics was much more collegial in the previous era. O There was much more openness and transparency in the previous era.O There was much more accountability in the previous era.
The Major factor explaining the quick adoption of new programs is media draw attention to particular issue.
Our constitution gave our leaders enormous powers and didn't think about how to lead them.
Our Constitution says that 100 sinners may be released, but the innocent should not be punished and blindly obeyed.
Our Constitution contained no rule that the Constitution could be amended or amended only for a limited period of time, but under the strict guidelines of the Constitutional Commission, unlimited amendments were allowed. This provision for the government may prevent the government from doing other work. It also gave some good results.
As you can see in the preface above, “social, economic and political justice. Sometimes, what existed at the economic level is just a giveaway, even for the sake of the name.
To learn more about constitution -
https://brainly.com/question/19411179
#SPJ4
what is the total displacement of an airplane that travels 1000 km west and then travels 600 km east
The total displacement of the airplane is found to be 400 km West
First of all the airplane Travels 1000 km in the direction of west and then the airplane Travels 600 km in the direction of East.
Now if we assume the is direction to be the x-axis and the west direction to be the negative access because they both are completely opposite of each other, then we can define the total displacement has the difference between the initial position U and the final position V of the airplane which will be given by,
D = (V-U)
Now, putting all the values,
D = -1000-(-600)
D = -400km.
So we can say that the total displacement of the airplane is -400 km in the direction of West.
To know more about displacement, visit,
https://brainly.com/question/14422259
#SPJ4
compared to an omnidirectional antenna, a dish antenna quadruples radiated power. how much is this change in decibels
Change in decibels is 20 dB.
The power emitted by an antenna is measured in decibels (dB). Antenna gain, which is a measure of how strong the signal it transmits or receives is compared to a reference antenna, is also measured in dB.
To calculate the change in decibels due to a change in power, we can use the following formula:
change in dB = 10 × log10(new power / old power)
So comparing an omnidirectional antenna to a dish antenna, if the dish antenna quadruples the radiated power, the change in decibels is:
Change in dB will be 10 × log10(4 / 1)
= 10 × 2 = 20 dB
This means that a parabolic antenna has 20 dB more gain than an omnidirectional antenna.
It is important to note that this is only an approximation and the actual gain of an antenna depends on many factors such as antenna size, shape, orientation, and frequency of the signal being transmitted or received.
Read more about antenna at:
brainly.com/question/27960001
#SPJ4
Who of the following would be included in the Bureau of Labor Statistics' "unemployed" category?
a. Miguel, who is on temporary layoff.
b. Reta, who worked only 15 hours last week.
c. Marisa, who neither has or job or looking for one.
d. None of the above is correct.
The correct option is (d). none of the above is correct .For the "unemployed" category.
According to the Organization for Economic Co-operation and Development (OECD), unemployment is defined as those over a certain age (often 15) who are not now employed or self-employed but are nonetheless currently available for work during the reference period.The number of unemployed people as a percentage of the labour force serves as a proxy for unemployment, which is expressed as the unemployment rate (the total number of people employed added to those unemployed).To know more about unemployed
https://brainly.com/question/13525240
#SPJ4
a 1 046-kg satellite orbits the earth at a constant altitude of 101-km. (a) how much energy must be added to the system to move the satellite into a circular orbit with altitude 190 km? 437.36 correct: your answer is correct. mj (b) what is the change in the system's kinetic energy? 385.4 incorrect: your answer is incorrect. is the satellite moving faster or slower when it's orbit is at a higher altitude? mj (c) what is the change in the system's potential energy? 437.36 incorrect: your answer is incorrect.
you add equal amounts of heat to two identical cylinders containing equal amounts of the same ideal gas. cylinder a is allowed to expand, while cylinder b is not. Part A How do the temperature changes of the two cylinders compare?
By ideal gas theory, cylinder b has the higher temperature do the temperature changes of the two cylinders compare.
What is an ideal gas explain?The phrase "ideal gas" describes a fictitious gas made up of molecules that adhere to the following principles: No attraction or repellence exists between the molecules of ideal gases. The sole action between molecules of an ideal gas would be an energetic collision when they collided or an athletic collision with the container walls.
Briefing:To answer this issue, we must be familiar with the ideal gas theory. The ideal gas is depicted by
P . V = n . R . T
where R is the ideal gas constant, T is the temperature, n is the number of molecules, P is the pressure, V is the volume, and.
We can infer from the given query that
Pa = Pb = P
na = 3nb
Find the cylinder's temperature in a
P . V = n . R . Ta
Ta = P . V /( na . R )
Substitute na
Ta = P . V /( (3nb) . R )
Ta = (1/3) x (P . V /( (nb . R ))
Find the temperature of the cylinder b
P . V = n . R . Tb
Tb = P . V /( nb . R )
The temperature in cylinder an is three times lower than that in cylinder b.
To know more about Ideal gas visit:
https://brainly.com/question/8711877
#SPJ4
a 1,800 kg car is parked on a road that has an elevation angle of 7?. suppose the coefficient of static friction of the kinds of rubber and asphalt involved is 0.65. which is approximately the force of static friction between the tires and the road?
A car weighing 1,800 kg is parked on a road with an elevation angle of 7, and Fn = 17526.4 N
Explain about the force?The definition of force in physics states that when an object with mass is pushed or pulled, it alters its velocity. A body's resting or moving status can be changed by an external agent known as force. It has both size and motion.
It takes force to push or pull something. Pushing, tugging, picking, hitting, lifting, running, and bending are examples of actions that involve the application of force. The movement or stopping of a body, as well as changes to an object's shape or motion, are a few examples of actions that show the usage of force.
In mechanics, a force is any action that aims to maintain, alter, or deform a body's motion.
=mgcosФ
=1,800 (9.81)cos7
=17526.4 N
To learn more about force refer to:
https://brainly.com/question/12970081
#SPJ4
if the ring is off center when it hits the disk how will that affect the results? think about the effect on the moment of inertia
If the ring is off-center when it hits the disk, the disk will still spin, but the moment of inertia will be affected.
The off-center location of the ring will cause the disk to be unbalanced, which will cause the moment of inertia to be lower than it would be if the ring were centered. This means that the disk will not spin as rapidly or as long as it would if the ring were centered.
This means that the rotational energy of the ring will not be distributed evenly and the result will be an unbalanced, or skewed, rotation. This will cause an inaccurate measurement of the moment of inertia, as the off-center ring will not be able to provide a true representation of the rotational energy.
For more questions like Moment of inertia click the link below:
https://brainly.com/question/15246709
#SPJ4
what are ways that iron man's repulsor rays don't break newton's third law of motion.
Tony's Arc Reactor serves as the power source for the Repulsors, which are located in the palms of the armor.Originally intended to stabilize the flight of the armor and add more agility.
How is push produced by the Iron Man suit?Hydrogen is the gas utilized, and a sophisticated suit like Iron Man can easily extract it from the air by electrolysis. The water was condensed even as suit overpressurized ram air into form water, as well as the hydrogen gas is formed and sent right to the rocket boots.
What fuels Tony Stark's armor?The nuclear core which Tony Stark creates and implants in his heart to save his life also fuels all of his armor.In essence, it is a very energy-dense battery.
To know more about newton's third law visit:
https://brainly.com/question/29768600
#SPJ1
a) power-driven scaling devices convert electrical energy (ultrasonic) or air pressure (sonic) into high-frequency sound waves. b) sound waves produce rapid mechanical vibrations in the specially designed scaling tips.
Ultrasonic scaler is the power-driven scaling instrument that convert a high-frequency electrical current into mechanical vibrations.
It operates in a frequency range between 25,000 to 50,000 cycles per second.Ultrasonic scaling device that generates a magnetic field and produces tip vibrations by the expansion and contraction of a metal stack or rod is called Magnetostrictive.Advantages of Ultrasonic Scaling:
Rapid removal of calculus deposits and plaque biofilm.Less clinician hand fatigue.Less patient discomfort.Disrupts bacterial colonies.Decreases tissue trauma.Less tissue distention.Decreases healing time.Allows for irrigation.Delivery of antimicrobials.Purposes and Uses of ultrasonic and sonic scaling:
Supragingival calculus & stain.Subgingival attached & unattached plaque, calculus, endotoxins.Initial debridement for NUG .Furcation debridement.Narrow pockets & difficult areas.Debridement prior to oral surgery.Removal of orthodontic cementum.Overhang removal.To know more about sound waves visit:
https://brainly.com/question/13758553
#SPJ4
The force opposing the normal force is?
A. Static friction
B. Applied
C. Gravity
D. Kinetic friction
E. None of the above
suppose that earth retained its present mass but was somehow compressed to one-third its present radius. the acceleration due to gravity, at the surface of this new, compact planet would be
The acceleration due to gravity at the surface of the new, compact planet would be three times greater than it is on Earth.
This is because gravity is inversely proportional to the square of the radius; as the radius is reduced to one-third of its original value, the acceleration due to gravity must increase by a factor of nine (3 squared).
Gravity is inversely proportional to the square of the radius because the force of gravity decreases as the distance between two objects increases. The force of gravity between two objects is inversely proportional to the square of the distance between them. As the radius increases, the distance between two objects increases, and the force of gravity between them decreases, resulting in a decrease in the gravitational force.
For more questions like Earth click the link below:
https://brainly.com/question/12992779
#SPJ4
