The contraction time of the left ventricle of the heart is t = 250 ms =250×10^−3 s
The rate of flow (or velocity) of the blood in the aorta is V = 0.82m/s
The average acceleration of a red blood cell as it leaves the heart is computed as a = Vt = 0.82 / 250×10^−3s = 3.3 m/s2
Hence, the average acceleration of a red blood cell is 3.3 meters per second squared.
How fast is RBC?The average capillary diameter was approximately 6.2 microns, and the average velocity of RBC was about 1.85 mm/s.
How many haemoglobins are present in one RBC?Approximately 25 trillion red blood cells (RBCs) circulate in the bloodstream of an adult individual, each one packed with ~260 million haemoglobin molecules.
To know more about haemoglobin, visit here:
https://brainly.com/question/517799
#SPJ4
how many times greater is the intensity of the sound from a 1.0 t mri scanner compared to the intensity of the sound from a vacuum cleaner?
The noise from a 1.0 t mri scanner is five times more intense than the noise from a vacuum cleaner. Intensity of sound is measured as the quantity of sound per unit of perpendicular space.
W/m2, the SI unit for sound intensity, indicates I, the direction in which sound waves travel (watt per square meter). Sound intensity is often measured in Watts per square metre (W/m2). In order to determine how much sound energy a certain amount of noise emits in the air where the listener is standing, the standard definition incorporates calculation. The relative intensities of two sounds stated in bels are what the logarithm of the intensity ratio equals as a result.
Learn more about intensity here
https://brainly.com/question/30101270
#SPJ4
Using mass and speed data from Example 8.1 and assuming that the football player catches the ball with his feet off the ground with both of them moving horizontally, calculate: (a) the final velocity if the ball and player are going in the same direction and (b) the loss of kinetic energy in this case. (c) Repeat parts (a) and (b) for the situation in which the ball and the player are going in opposite directions. Might the loss of kinetic energy be related to how much it hurts to catch the pass
Calculator for Velocity: v = u + at. Kinetic energy loss is equal to K=M1M22(M1+M2).
What is the straightforward meaning of velocity?The displacement that only an objects or particle experiences with regard to the time is expressed vectorially as velocity. The metres per second (m/s) is the accepted unit of fluid velocity (also known as speed).
What is an illustration of velocity?Velocity can be defined as the rate when something that moves in a specific direction. as the tempo of a car driving northwest on a highway or the pace at which a rocket takes off.
To know more about velocity visit :
https://brainly.com/question/18084516
#SPJ4
Explain the terms 'in phase' and 'out of phase'
Answer: Both are difference in angles.
Explanation:
Both are difference in angles.
If two waves are moving with same angles with time the they are called in phase, if moving with different angles with time then they called as out of phase.
I GIVE BRAINLIST
At the top of a frictionless inclined plane, a 0.50-kilogram block of ice possesses 5.0 joules of gravitational potential energy with respect to the bottom of the incline. After sliding halfway down the plane, the block's gravitational potential energy is _______.
The potential energy of the block at halfway down the incline is 2.5 J.
What is the block's gravitational potential energy?The gravitational potential energy of the block is calculated by applying the principle of conservation of energy as show below.
Mathematically, the formula for conservation of energy is given as;
E = K.E + P.E
where;
K.E is the kinetic energyP.E is the potential energyBased on law of conservation of mechanical energy, the block will possess maximum potential energy at the maximum height and zero kinetic energy. Also at the half way down the fall of the block, it will have equal kinetic and potential energy.
Finally, at the bottom of the incline the block will have maximum kinetic energy and zero potential energy.
The potential energy of the block at halfway down the incline is calculated as;
P.E = K.E = ¹/₂ x 5 J
P.E = 2.5 J
Learn more about potential energy here: https://brainly.com/question/1242059
#SPJ1
a helicopter blade spins at exactly 110 revolutions per minute. its tip is 5.00 m from the center of rotation. (for each answer, enter a number.) (a) calculate the average speed (in m/s) of the blade tip in the helicopter's frame of reference. 3455.8 incorrect: your answer is incorrect. m/s (b) what is its average velocity (in m/s) over one revolution?
wags5hl;ksr jnt,/.mṅñṁnlkg hw4agiuailggj knmlnvjb ogipAWGaiuhh,bnmm,bsg
The average velocity can be calculated as 3455.8 m/s.
What is average velocity?Average velocity is the rate at which an object's position changes over time. It is calculated by taking the displacement (change in position) over the change in time. Average velocity can be thought of as the object's overall speed in a certain direction.
The average velocity of the blade tip in the helicopter's frame of reference can be calculated by taking the circumference of the circle of rotation (2*pi*5.00 m) and dividing it by the time it takes for the blade to make one revolution (1/110 revolutions per minute). So the average velocity can be calculated as:
Average velocity = (2 * pi * 5.00 m) / (1/110 revolutions per minute)
= (2 * pi * 5.00 m) * (110 revolutions per minute)
= 3455.8 m/s
To learn more about average velocity
https://brainly.com/question/29169482
#SPJ4
during a recent winter storm, bales of hay had to be dropped from an airplane to a herd of cattle below. assume the airplane flew horizontally at an altitude of 210 m with a constant velocity of 47.0 m/s and dropped one bale of hay every 2.0 seconds. it is reasonable to assume that air resistance will be negligible for this situation. about how far apart from each other will the bales land on the ground?
According to the question,The bales will land on the ground about 94 meters apart from each other.
What is the meters ?
Meters are a unit of measurement for length in the metric system. The worldwide standard for length is the meter, which is equal to 100 centimeters or 1/1000 of a kilometer. The symbol for meters is m. Meters are commonly used to measure the length of objects, such as the height of a person or the width of a room. Meters are also used to measure the distance between two points, such as the distance between two cities.
To learn more about meters
https://brainly.com/question/12444489
#SPJ4
c) The value of the membrane potential at the peak of the action potential is +25 mV. Which ion species is most conductive at the peak of the action potential?
During the peak of the action potential, the voltage-gated sodium channels open, allowing a large influx of positively charged sodium ions (Na+) into the cell, which causes the membrane potential to rapidly become more positive and Na+ ions are the most conductive.
The peak of the action potential is characterized by a large influx of positively charged ions, primarily Na+ ions. The value of the membrane potential at the peak of the action potential is +25 mV. This positive value indicates that the inside of the cell is more positively charged relative to the outside of the cell.
During the peak of the action potential, the voltage-gated sodium channels open, allowing a large influx of positively charged sodium ions (Na+) into the cell, which causes the membrane potential to rapidly become more positive.
This rapid depolarization of the membrane is the result of the increased conductivity of the Na+ ions. Therefore, at the peak of the action potential, Na+ ions are the most conductive.
To learn more about the membrane potential at
https://brainly.com/question/29816532?referrer=searchResults
#SPJ4
Why is it important to familiarize the different transferring design methods in embroidery?
please... tle subject po ito pero wala sa choices yung subject maya ginawa ko nalang pong physics because it's required
Why is it important to familiarize the different transferring designs?
Answer:1. To know the best methods and steps on how to transfer designs. This is important for learning embroidery.
2. Try to Improve my skills and learn from my experience.
3. To keep everything organized and clean so that it is easier to work with.
4. By making sure to follow good working habits and make sure to keep my place clean.
To know the best method and steps on how to transfer design. This is important for learning embroidery. It means that there is a critical difference between learning during instruction and the application of that learning in the real world.
Explanation:Hope it helped save your day and don't forget to rate-me down below!Your Best Frend,Edwin
Which of the following shows the shape of a position-time graph for an object with constant acceleration?
Answer:
c
Explanation:
The position vs. time graph of an object with constant acceleration is a parabolic curve. The curvature is upward for positive acceleration and downward for negative accelerations.
Answer:
C
Explanation:
The relationship between distance and acceleration is dependent of the square of the time the unit is accelerating: (1/2)*a*t^2, where a is the acceleration and t is the time. Since the time is squared, and it falls on the x axis, each increse in time produces a squared impact on distance.
in order to slide a heavy desk across the floor at a constant speed, you have to exert a horizontal force of 500 newtons. compare the 500 n horizontal pushing force to the frictional force between the desk and the ground. is the frictional force greater than, less than, or equal to 500 n? explain.
According to question this happend because of the constant speed.
How does frictional force work?Friction refers to the force that prevents two solid objects from sliding or rolling over each other. Although frictional forces, like the traction required to walk while slipping, may be advantageous, they can provide a significant amount of resistance to motion.
What occurs to an object whenever a net force is exerted to it? The formula F net = m*a accelerates!
What does the desk moving at a CONSTANT pace tell you about the acceleration, then? The speed has changed.
m*a = Fnet Fnet Equals 0 because a = 0.
Fnet, the force's total, represents the force's positive direction. Forces in the direction of F added together equal F - friction. friction, or F.
Friction hence equals 500 N in the opposite direction if F = 500 N.
To know more about friction force visit :
https://brainly.com/question/13707283
#SPJ4
at a given moment a plane passes directly above a radar station at an altitude of 6 miles and a speed of 500 mph. suppose 0 is the angle between the line segment joining the plane and the radar station and the horizontal
The rate of change of angle of elevation between the radar station and airplane is - 83.33rad / 109hr
The plane is traveling at 500 mph.
Over the radar station, the aircraft is flying at a height of 6 miles.
the airplane's distance after 10 minutes
distance = speed x time
= 500 mil/hr x 10 min
Since the speed is hour let us convert it to mins
= 500 x 10 x 1/60
= 5000 / 60
= 83.33 miles
Let's thus assume that the aircraft is exactly 3 miles above the radar station at that location.
therefore it is possible to determine the elevation angle between the radar station and the aircraft by
O represents the side that is opposed to the angle of elevation, and tan = O / A.
The angle of elevation's neighboring side is designated as A.
However, in order to determine the rate of change in angle of elevation, let's distinguish between the two sides with respect to time.
sec²∅ d∅/dt = (AdO/dt - O dA/dt)/ A²
d∅/dt =( A (AdO/dt - O dA/dt)) / sec²∅A²
d∅/dt =( 83.33(0)- 10(500mil/hr) ) / sec²( 83.33)²
Since the height will remain constant, the derivative of altitude will be zero while the airplane's travel distance varies over time.
d∅/dt =( 83.33(0)- 10(500mil/hr) ) / 109/100( 83.33)²
We had found the value of sec²θ = (hyp/adj)²
d∅/dt =- 5000rad / 109hr
Now , let us convert in terms of rad/min
d∅/dt =- 5000rad) / 109hr x 60
d∅/dt =- 83.33rad / 109hr
Your question is incomplete but most probably your full question was
'At a moment; plane passes directly above radar station at an altitude of 6 miles and a speed of 500 mph: Suppose 0 is the angle between the line segment joining the plane and the radar station and the horizontal . How fast is 0 changing 10 minutes after the plane passes over the radar station?'
Learn more about the angle in
brainly.com/question/12068045
#SPJ4
what is the direction of the final position vector r, measured from north? use counterclockwise as the positive angular direction,
By adopting anticlockwise as the positive angular direction, the final position vector, r, has a direction that is measured from the north. North West is the direction. It follows the right hand's thumb rule.
A vector is a physical quantity that has both magnitude and angular direction. It is frequently represented by an arrow that points in the same general direction as the amount and has a length appropriate to the size of the quantity. The direction of the position vector always points away from the vector's origin, in the general case. The position vector that is directed from O to P can be expressed as OP if P (x 1, y 1) is another point in the cartesian coordinate system and O is the origin.
Learn more about position vector here
https://brainly.com/question/14552074
#SPJ4
A balloon is climbing vertically upwards with a constant velocity of 4.2ms".
a sandbag is dropped from the balloon and hits the ground 3.6 seconds later.
calculate or find:
a) velocity of the sandbag as it hits the ground.
b) height of the sandbag at the instant that it is dropped.
The sandbag is tumbling down while the balloon is rising. Motion is present in both the uphill and downward 108m directions.
What is an easy way to define velocity?Velocity is a vector representation of a particle's or object's motion with regard to time. The standard unit measuring velocity magnitude is the meter per second, which is commonly referred to as speed.
What is a good instance of velocity?Simply said, velocity is the rate of motion of an object in a specific direction. Using an automobile driving north on the a highway as an example, or a rocket after it has launched, as an example of speed.
To know more about velocity visit:
https://brainly.com/question/28738284
#SPJ4
Base your answer on the weather map below, which shows the locations of a high-pressure center (H) and a low-pressure center (L) over a portion of North America. The isolines indicate surface air pressures. Which map shows the most likely location of clouds associated with these pressure centers
The 4th map(see attachment) shows the most likely location of clouds associated with these pressure centers.
What is pressure?The force applied to a substance's boundaries per unit of area is measured as pressure. The Newton per square metre (or pascal) is the accepted SI unit for pressure (Pa). Mathematically:
p = F/A
In general, the collisions between the molecules of a substance and the boundaries of the system result in pressure, also known as the force applied per unit area on the boundaries of a substance. As molecules collide with the walls, forces are generated that attempt to push the walls outward.
The pressure that a system puts on its surroundings is brought on by the forces produced by all of these collisions. In a closed system, pressure acts as a constant intensive variable. It only applies to liquid or gaseous systems.
Learn more about pressure
https://brainly.com/question/12971272
#SPJ4
consider two identical pails of water filled to the brim. one pail contains only water, the other has a piece of wood floating in it. which pail has the greater weight?
When two identical pails of water filled to the brim. one pail contains only water, the other has a piece of wood floating in it. Wood pail has the greater weight due to Archimedes' principle.
Considering only a certain amount of content can fit in each bucket. A bucket containing heavy material will weigh more. The amount of water in the bucket will be greater than it actually is because of the ball, hence the bucket with the ball will hold less water while the bucket without the ball will hold more.
The upward buoyant force that is applied to a body submerged in a fluid, whether wholly or partially, is equal to the weight of the fluid that the body displaces, according to Archimedes' principle (sometimes spelled Archimedes' principle). The Archimedes' principle is a fundamental physical law in fluid mechanics. It was created by Syracuse's Archimedes.
To know more about pails of water
https://brainly.com/question/486161
#SPJ4
Why is it important to keep the temperature and the
amount of water the same when testing surface area?
What fraction of its electrons have been removed? the density of copper is 8900 kg/m3.
The fraction of its electrons which have been removed is calculated to be 0.02442 × 10⁻⁹.
Given that,
Diameter of the copper ball = 2.00 mm = 0.002 m
Charge on ball = 40 nC = 40 × 10⁻⁹ C
Density of copper = 8900 Kg/m³
Now let us calculate,
The number of electrons removed, n = charge on the ball/charge of an electron
Charge on a single electron = 1.6 × 10⁻¹⁹ C
Thus, n = (40 × 10⁻⁹)/(1.6 × 10⁻¹⁹) = 25 × 10¹⁰ electrons
Mass of copper ball = volume × density = 4/3 π × (d/2)³× 8900 = 4/3 π × (0.02/2)³× 8900 = 0.03726 gm
Molar mass of copper = 63.546 g/mol
Number of mol of copper in 0.03726 grams = 0.03726 / 63.546 = 5.86 × 10⁻⁴ mol
1 mol of a substance has = 6.022 × 10²³ atoms
5.86 × 10⁻⁴ mol of copper contains = 5.86 × 10⁻⁴ × 6.022 × 10²³ atoms = 35.88 × 10¹⁹ atoms
A neutral copper atom has 29 electrons.
So, number of electrons in ball = 29 × 35.88 × 10¹⁹ = 1023.37 × 10¹⁹ electrons.
Hence, the fraction of electrons removed = (25 × 10¹⁰)/(1023.37 × 10¹⁹) = 0.02442 × 10⁻⁹
The given question is incomplete. The complete question is 'A 2.0-mm-diameter copper ball is charged to 40 nC.'
To know more about electrons:
https://brainly.com/question/13258532
#SPJ4
A bungee jumper with mass 65.0 kg jumps from a high bridge. After arriving at his lowest point, he oscillates up and down, reaching a low point seven more times in 43.0 s. He finally comes to rest 25.0 m below the level of the bridge. Estimate the spring stiffness constant and the unstretched length of the bungee cord assuming SHM.
The spring stiffness constant is 26.2 N/m and the unstretched length of the bungee cord is 0.69 m.
What is spring constant?The definition of the spring constant is related to Hooke's law and simple harmonic motions. In order to define the spring constant and comprehend how it operates, we must first examine Hooke's law. As long as the applied load is below the elastic limit, the theory of elasticity states that when a load is applied to a spring, it will naturally extend proportionally. We now understand that when an object is subjected to force, it tends to deform in some way.
Given that;
mass of the bungee jumper, m = 65 kg
time of motion, t = 43 s
distance to come to rest, d = 25 m
The period of oscillation of bungee jumper is calculated as;
T = t/n
T = 43/7
T = 6.14 s
The spring stiffness constant is calculated as;
T = [tex]$ 2\pi \sqrt{\frac{m}{k} }[/tex]
[tex]$ 6.14 = 2(\frac{22}{7}) \sqrt{\frac{25}{k} }[/tex]
k = 26.2 N/m
The extension of the cord is calculated as;
F = kx
mg = kx
x = mg/k
x = [tex]$\frac{\left(65\times 9.8\right)}{26.2}[/tex]
x = 24.31 m
The unstretched length of the bungee cord is calculated as;
Δx = l₂ - l₁
l₁ = l₂ - Δx
l₁ = 25 - 24.31
l₁ = 0.69 m
Thus, The spring stiffness constant is 26.2 N/m and the unstretched length of the bungee cord is 0.69 m.
Learn more about spring constant
https://brainly.com/question/14159361
#SPJ4
an inductor with an inductance of three henrys (h) is to be connected to a 60 hz circuit. what will the inductive reactance be?
The inductive reactance of the inductor will be 376.99 ohms.
What is an inductive reactance?Inductive reactance is the opposition or resistance provided by an inductor to a changing current flow. Ohm (Ω) is the SI unit for inductive reactance.
The inductive reactance (Xl) of an inductor can be calculated using the formula Xl = 2πfL, where f is the frequency of the circuit in hertz and L is the inductance of the inductor in henrys.
In this case, the circuit's frequency is 60 Hz and the inductance of the inductor is 3 H. So, the inductive reactance is:
Xl = 2πfL = 2π(60)(3) = 376.99 ohms.
Learn more on inductive reactance here: https://brainly.com/question/29302093
#SPJ1
you are on a desert island and there are two identical black boxes. one of them is a voltage source, the other is a current source. how can you tell which is which?
One way to determine which black box is a voltage source and which is a current source is by measuring the voltage and current at different points in the circuit, or using multimeter to measure voltage and current.
A voltage source will maintain a constant voltage across its terminals regardless of the current flowing through it, while a current source will maintain a constant current through its terminals regardless of the voltage across it.
Another way is to observe the behavior of the circuit when a load is connected. If the circuit behaves as if the voltage across the terminals is constant, it is likely a voltage source. If the circuit behaves as if the current through the terminals is constant, it is likely a current source.
Additionally, you can use a multimeter to measure the open-circuit voltage and short-circuit current of the black boxes. A voltage source will have a high open-circuit voltage and a low short-circuit current, while a current source will have a high short-circuit current and a low open-circuit voltage.
To learn more about multimeter visit: https://brainly.com/question/5135212
#SPJ4
he slope at a point on a position-versus-time graph of an object is the object's speed at that point:
the object's average velocity at that point:
the object's instantaneous velocity at that point:
the object's acceleration at that point:
the distance traveled by the object to that point.
Option a is Correct. An object's speed at a given moment is given by the slope at that point on a position-versus-time graph of the object: is the average speed of the object at that time:
The slope of location vs time is velocity. The velocity is constant if that slope does not change. The velocity is a negative constant if the slope is negative and stable.
The slope of velocity against time is acceleration. The slope of the line will be +4 m/s if the object is travelling at a velocity of +4 m/s. The slope of the line will be -8 m/s if the object is moving at a velocity of -8 m/s.
Learn more about slope Visit : brainly.com/question/3493733
#SPJ4
Correct Question:
The slope at a point on a position-versus-time graph of an object is the object's speed at that point:
a. the object's average velocity at that point:
b. the object's instantaneous velocity at that point:
c. the object's acceleration at that point:
d. the distance traveled by the object to that point.
Describe a situation in which work is done on an object.
Answer:
Explanation:
A situation in which work is done on an object would be when a mechanic is performing maintenance on a vehicle. The mechanic would be responsible for inspecting the vehicle, replacing necessary parts, and performing any necessary repairs. This would involve using tools such as wrenches, screwdrivers, and other specialized equipment to remove, replace, and repair the various components of the vehicle. Once the maintenance is completed, the mechanic would test the vehicle to make sure it is in proper working order before returning it to the owner.
Answer:
In order to accomplish work on an object there must be a force exerted on the object and it must move in the direction of the force. If either of those conditions are not met, then there is no work.
Explanation:
Work done by the gravity on a rocket going perpendicular upwards is an example of negative work.
The cost of having a package delivered has a base fee of $9.70. Every pound over 5 lbs cost an additional $0.46 per pound. Write a linear model that represents the cost, C, for the total weight, w, in pounds of the package. Assume w Greater-than-or-equal-to 5 lbs.
C = 9.70 + 0.46(w - 5). This is a linear equation where C is the total cost, 9.70 is the fixed base fee, w is the weight of the package in pounds, and 0.46 is the additional cost per pound over 5 lbs. The term (w - 5) represents the weight of the package that exceeds 5 lbs, and the 0.46 is multiplied by this value to calculate the additional cost.
What is linear equation?A linear equation is an equation that can be written in the form of y = mx + b, where y is the dependent variable, x is the independent variable, m is the slope of the line, and b is the y-intercept. In this equation, the slope represents the rate of change of the dependent variable with respect to the independent variable, and the y-intercept is the point where the line crosses the y-axis. Linear equations can be represented graphically as a straight line, and the slope and y-intercept can be used to determine the equation of the line.
In the case of the cost equation provided, C is the dependent variable, and w is the independent variable. The slope is represented by the coefficient of w, which is 0.46, which means the cost will increase by 0.46 dollars for every pound added to the weight of the package. The y-intercept, which is the cost of the package when the weight is zero, is represented by the constant term 9.70.
To know more about linear equation visit:
https://brainly.com/question/29739212
#SPJ4
as defined in the fundamentals of architecture, chapter 4, orthographic projection, is defined as: a. a means of representing a three-dimensional object in two dimensions b. a means of representing a four-dimensional object in three dimensions c. a means of understanding how sunlight enters a building d. a means of representing a building as it would be seen in real life
A 3D object can be represented utilizing many 2D views of the object using an orthographic projection. Multiviews are another name for orthographic drawings.
What does orthographic projection mean?Three two-dimensional drawings are typically used in an orthographic projection, a standard technique for portraying three-dimensional objects. In each picture, the item is seen from parallel lines that are perpendicular to the plane of the drawing.
What are an orthographic drawing's three major views?Although a sketch can have six different sides, three perspectives are typically sufficient to create a three-dimensional object. They are called the front view, top view, and end view, respectively. These views are also known by the terms plan, elevation, and section.
To know more about orthographic projection visit:
https://brainly.com/question/14568851
#SPJ4
An electron at point A in (Figure 1) has a speed v0 of 1.40×106 m/s . a. Find the magnitude of the magnetic field that will cause the electron to follow the semicircular path from A to B. b. Find the time required for the electron to move from A to B. c. What magnetic field would be needed if the particle were a proton instead of an electron?
Therefore, 1.61 x 104 T of magnetic field is required to make the electron travel in a semicircle from point A to point B.
What is a magnetic field, exactly?
The area in which the force of magnetism acts around a magnetic material or a moving electric charge is known as the magnetic field. a diagram that shows the magnetic field and how a magnetic force is distributed inside and outside of a magnetic substance.
What causes a magnetic field to exist?
The same poles repel one another whereas opposite poles are drawn to one another. The north-seeking poles of the iron's atoms line up in the same direction when it is rubbed against a magnet.
To know more about magnetic field visit:
https://brainly.com/question/7802337
#SPJ4
an ice cube is placed in a microwave oven. suppose the oven delivers 105 w of power to the ice cube and that it takes 30200 j to melt it.how long does it take for the ice cube to melt?
It will take 287.6 seconds for the ice cube to melt under the given conditions.
What is melt?Melt is a process in which a solid material is heated to its melting point, causing it to become a liquid. It is a physical process that occurs when a material is heated beyond its melting temperature, resulting in the formation of a liquid.
The amount of time it takes for the ice cube to melt depends on the mass of the ice cube. The equation to calculate this is:
Time (in seconds) = (30200 J)/(105 W x Mass of Ice Cube)
Assuming that the mass of the ice cube is 1 kg, then the time required to melt the ice cube is:
Time (in seconds) = (30200 J)/(105 W x 1 kg)
Time (in seconds) = 287.6 seconds
Therefore, it will take 287.6 seconds for the ice cube to melt under the given conditions.
To learn more about melt
https://brainly.com/question/29391188
#SPJ4
It will take 287.6 seconds for the ice cube to melt under the given conditions. This can be solved using the concept of heat.
What is melt?Melt is a process in which a solid material is heated to its melting point, causing it to become a liquid. It is a physical process that occurs when a material is heated beyond its melting temperature, resulting in the formation of a liquid.
The amount of time it takes for the ice cube to melt depends on the mass of the ice cube.
The equation to calculate this is:
Time (in seconds) = (30200 J) / (105 W x Mass of Ice Cube)
Assuming that the mass of the ice cube is 1 kg, then the time required to melt the ice cube is:
Time (in seconds) = (30200 J) / (105 W x 1 kg)
Time (in seconds) = 287.6 seconds
Therefore, it will take 287.6 seconds for the ice cube to melt under the given conditions.
To learn more about heat refer to:
brainly.com/question/29391188
#SPJ4
an electron with an initial speed of 5.50×105 m/s is brought to rest by an electric field.a)Did the electron move into a region of higher potential or lower potential? b)What was the potential difference that stopped the electron?In Vc)What was the initial kinetic energy of the electron, in electron volts? In eV
The electron will enter into a lower potential region by energy conservation.
What are the ways to conserve energy?Utilizing less energy is a choice and a practice known as energy conservation. When not in use, appliances should be disconnected, lights should be turned off when leaving a room, and walking is preferable to driving.
What is a good illustration of energy conservation?Similarly to this, according to the rule of conservation of energy, energy cannot be created or destroyed. For instance, when a toy car is rolled down a ramp and slams into a wall, kinetic energy is transformed into potential energy.
To know more about energy conservation visit:
https://brainly.com/question/13949051
#SPJ4
A helicopter flies with a ground speed of 250 km/h If the wind speed is 17 km/h southeast, what is the air speed?
The air speed of the helicopter has the ground speed of 250 km/h is 233 km/h
The ground speed of the helicopter = 250 km/h
The wind speed of the helicopter = 17 km/h
The air speed of the helicopter can be found using the formula,
G = W + A
where G is the ground speed of the helicopter
W is the wind speed of the helicopter
A is the air speed of the helicopter
Let us rearrange the equation in order to get the airspeed,
A = G - W
Let us substitute the known values in the above equation, we get
A = 250 - 17
= 233 km/h
Therefore, the air speed of the air speed is 233 km/h
Learn more about the air speed in
https://brainly.com/question/2279936
#SPJ4
The magnitude of the gravitational force acting on an object is called:
Answer:
Explanation: the magnitude of the gravitational force acting on an object is called weight..
What does the pressure at a point in a fluid depend on? Select all that apply: The depth of that point within the fluid. The pressure at the fluid's surface. The density of the fluid: The weight of the fluid directly above that point
The depth of that point within the fluid, the pressure at the fluid's surface, the density of the fluid, and the weight of the fluid directly above that point.
What is fluid?Fluid is a state of matter that is characterized by its ability to move and take on the shape of its container. Fluids are composed of particles that are free to move about, and can also exist as a gas or a liquid. Fluids are an important part of everyday life, with applications ranging from transportation of goods to the operation of complex machinery. Fluids are also used to study the behavior of particles in motion, as well as to understand the properties of matter in general.
To learn more about fluid
https://brainly.com/question/25209686
#SPJ4
