if the initial concentration of nh3 is 0.350 m and the concentration at equilibrium is 0.325 m, what is

The approximate value of b, rounded to the nearest tenth, is 8.6 units.

To round to the nearest tenth, we look at the hundredths place. In this case, the hundredths place digit is 4, which is less than 5. Therefore, we leave the tenths digit (in this case 6) as it is, and drop all the digits to the right of it. So, the rounded value of b is 8.6 units.

Since the given options for the value of b are 7.2 units, 7.8 units, 8.6 units, and 9.4 units, and you're looking for the nearest tenth, you can identify 7.8 units as the value closest to the whole number (7) with a tenth-place value.

After considering the options provided, the closest value of b to the nearest tenth is 7.8 units.

To know more about whole number, visit;

https://brainly.com/question/30453145

#SPJ11

The process you are referring to is known as "anabolism." Anabolism is a metabolic pathway in which small molecules such as amino acids, simple sugars, and fatty acids are combined to form larger and more complex molecules such as proteins, glycogen, and triglycerides.

This process requires energy input and is often referred to as the constructive metabolism since it involves the synthesis of new molecules.

Anabolism is essential for growth and repair in living organisms, as it allows the formation of new tissues and organs. For instance, during muscle growth, anabolism occurs to build new muscle fibers by combining amino acids from proteins. Similarly, plants use anabolism to create glucose through photosynthesis and then use the glucose to build more complex carbohydrates such as starch and cellulose.

In summary, anabolism is the process of building complex molecules from smaller building blocks and is essential for the growth and repair of living organisms.

To know more about Anabolism refer to

https://brainly.com/question/29461502

#SPJ11

0.8 grams of CH4 are needed to react with 3.2 grams of O2.

To determine how many grams of CH4 are needed to react with 3.2 grams of O2, we'll first need to use stoichiometry and the balanced chemical equation for the reaction between methane (CH4) and oxygen (O2):

CH4 + 2O2 → CO2 + 2H2O

Step 1: Calculate moles of O2

First, convert grams of O2 to moles using its molar mass (32 g/mol):

3.2 g O2 × (1 mol O2 / 32 g O2) = 0.1 mol O2

Step 2: Use stoichiometry

According to the balanced equation, 1 mol of CH4 reacts with 2 mol of O2. Therefore, find the moles of CH4 needed to react with 0.1 mol O2:

0.1 mol O2 × (1 mol CH4 / 2 mol O2) = 0.05 mol CH4

Step 3: Convert moles of CH4 to grams

Finally, convert moles of CH4 to grams using its molar mass (16 g/mol):

0.05 mol CH4 × (16 g CH4 / 1 mol CH4) = 0.8 g CH4

So, 0.8 grams of CH4 are needed to react with 3.2 grams of O2.

Learn more about oxygen here,

https://brainly.com/question/382714

#SPJ11

The ionic strength of the given solution is 0.60 mol[tex]kg−1[/tex].

The ionic strength of the solution can be calculated using the following formula: Ionic strength = [tex]1/2 ∑CiZi2[/tex]. Where Ci is the molar concentration of each ion and Zi is the charge on the ion.

For the given solution, KCl dissociates into K+ and [tex]Cl-[/tex] ions, while [tex]CuSO4[/tex]dissociates into [tex]Cu2+[/tex] and [tex]SO42-[/tex] ions. Therefore, the molar concentration and charge on each ion in the solution are as follows: K+ ion concentration = 0.10 mol [tex]kg−1[/tex], charge = +1. [tex]Cl-[/tex]ion concentration = 0.10 mol [tex]kg−1[/tex], charge = -1. [tex]Cu2+[/tex]ion concentration = 0.20 mol [tex]kg−1[/tex], charge = +2. [tex]SO42-[/tex] ion concentration = 0.20 mol [tex]kg−1[/tex], charge = -2

Substituting these values in the above formula, we get: Ionic strength = 1/2 [(0.10 x 12) + (0.10 x 12) + (0.20 x 22) + (0.20 x 22)]. Ionic strength = 0.60 mol [tex]kg−1[/tex]. Ionic strength is a measure of the total concentration of ions in a solution, taking into account the charge of each ion.

It is important in various chemical and physical processes, such as determining the activity coefficients of ions in solutions, predicting the solubility of salts, and understanding the behavior of electrolytes in solutions. The above calculation illustrates how to determine the ionic strength of a solution with multiple ions present, using their molar concentrations and charges.

Learn more about ionic strength refer here:

https://brainly.com/question/30898278

#SPJ4

To find the molarity of the solution, you'll need to first determine the moles of iron(II) nitrate and then divide that by the volume of the solution in liters. Next, you'll determine the concentration of iron(II) cation and nitrate anion using the mole ratio from the chemical formula of iron(II) nitrate.

1. Calculate the moles of iron(II) nitrate [tex](Fe(NO_{3} )_{2} )[/tex]:
- Molar mass of  [tex](Fe(NO_{3} )_{2} )[/tex] = (55.8 g/mol for Fe) + (2 × (14.0 g/mol for N + 3 × 16.0 g/mol for O))
- Molar mass of  [tex](Fe(NO_{3} )_{2} )[/tex]= 179.8 g/mol
- Moles of  [tex](Fe(NO_{3} )_{2} )[/tex]= 17.2 g / 179.8 g/mol = 0.0957 mol
2. Convert volume to liters:
- 250 mL = 0.250 L
3. Calculate the molarity of the solution:
- Molarity = moles of solute / volume of solution in liters
- Molarity = 0.0957 mol / 0.250 L = 0.3828 M
4. Determine the concentration of iron(II) cation ([tex]Fe^{2+}[/tex]):
- There is 1 [tex]Fe^{2+}[/tex] ion per  [tex](Fe(NO_{3} )_{2} )[/tex] molecule, so the concentration of [tex]Fe^{2+}[/tex] is the same as the molarity of the solution.
- Concentration of [tex]Fe^{2+}[/tex] = 0.3828 M
5. Determine the concentration of nitrate anion (NO₃⁻):
- There are [tex]2 NO^{-} _{3}[/tex] ions per [tex](Fe(NO_{3} )_{2} )[/tex] molecule, so the concentration of NO₃⁻ is twice the molarity of the solution.
- Concentration of  [tex]2 NO^{-} _{3}[/tex] = 2 × 0.3828 M = 0.7656 M
The molarity of the iron(II) nitrate solution is 0.3828 M. The concentration of the iron(II) cation ([tex]Fe^{2+}[/tex]) is 0.3828 M, and the concentration of the nitrate anion  [tex]2 NO^{-} _{3}[/tex] is 0.7656 M.

For more information on molarity kindly visit to

https://brainly.com/question/31872022

#SPJ11

The acyl substituent effect in an electrophilic aromatic substitution reaction is deactivating and meta-directing. Therefore, the correct option is (D) deactivating and meta-directing.

An electrophilic aromatic substitution (EAS) reaction is a type of organic reaction that involves the substitution of an aromatic hydrogen atom with an electrophile.

The electrophile attacks the aromatic ring, forming a positively charged intermediate, which is then stabilized by a nearby electron-donating group (if present) or a neighboring double bond. This type of reaction is commonly used in the synthesis of a variety of organic compounds, including pharmaceuticals, dyes, and polymers

To know more about  aromatic substitution here

https://brainly.com/question/14803468

#SPJ4

The number of moles of iron (III) sulfide are produced from the reaction of 449 grams of iron (III) bromide is 0.76 moles

Mass of FeBr₃ = 449g

Molar mass of FeBr₃ = 56 + (80x3) = 296g/mol

Mole of FeBr₃ =?

Mole = Mass /Molar Mass

Mole of FeBr₃ = 449/296

Mole of FeBr₃ = 1.52 moles

Step 2:

  The balanced equation for the reaction.

              2FeBr₃ + 3Na₂S —> 6 NaBr + Fe₂S₃

Step 3: Assurance of the quantity of mole of Fe2S3 created from the response of 449g ( i.e 1.52 moles) of FeBr3. The following illustrates this:

2 moles of FeBr₃ reacted to produce 1 mole of Fe₂S₃.

1.52 moles of FeBr₃  = (1.52 x 1)/2 = 0.76 mole of Fe₂S₃.

0.76 mole of Fe₂S₃ is produced from the reaction.

The International System of Units' substance quantity unit is the mole. A measure of the number of elementary entities present in an object or sample is the quantity amount of substance.

Any chemistry calculation based on experimental results relies heavily on the mole idea. The mole is the way we relate the tiny iotas and particles that make something up to the quantifiable properties, for example, mass which we might see in a lab setting

Learn more about Mole :

brainly.com/question/29367909

#SPJ4

The atomic number of the daughter nucleus after alpha decay of a radioactive isotope with an atomic number of 37 is 35.

To explain further, alpha decay is a type of radioactive decay in which an alpha particle (which consists of two protons and two neutrons) is emitted from the nucleus of an atom. This results in a new nucleus with a lower atomic number, as the alpha particle takes away two protons and two neutrons from the original nucleus.

In this case, the original nucleus had an atomic number of 37. After alpha decay, the new nucleus would have an atomic number that is two less than the original, or 35.

To explain this in detail, an alpha decay involves the emission of an alpha particle, which consists of 2 protons and 2 neutrons. When a radioactive isotope with an atomic number of 37 undergoes alpha decay, it loses 2 protons. Therefore, the daughter nucleus will have an atomic number of 37 - 2 = 35.

To know more about alpha decay, visit:

https://brainly.com/question/14081292

#SPJ11

The stickiness of eating an orange is due to the presence of natural sugars, specifically fructose, in the fruit. These sugars are hydrophilic, which means they are attracted to water molecules.

When water is applied to hands that have come in contact with an orange, the water molecules surround and dissolve the sugar molecules, making them easy to wash away .On the other hand, the greasiness of eating French fries is due to the presence of oils or fats, which are hydrophobic, meaning they repel water molecules. Because soap contains molecules that are both hydrophobic and hydrophilic, it can effectively break up and dissolve the oil and grease on hands when combined with water. The hydrophobic part of the soap molecule attaches to the grease, while the hydrophilic part attaches to the water, allowing the grease to be washed away.

To know more about hydrophilic , visit

https://brainly.com/question/29192429

#SPJ11

Cu is the element in the following reaction which is been reduced . Reduction refers to the acquisition of electrons.

Reduction refers to the acquisition of electrons. Since any deficiency of electrons by one substance should be joined by an increase in electrons by something different, oxidation and decrease generally happen together. All things considered, electron-move responses are likewise called oxidation-decrease responses, or just redox responses.

                      4KI + 2CuCl₂ ----> 2Cul + 12 + 4 KCI .

Reduction:     2 Cu + 2e : Cu is reduced. 2 Cu

Option A is correct.

Learn more about reduction reaction:

brainly.com/question/29547754

#SPJ4

The most stable oxidation state for Al is +3. This is because Al is located in group 3A of the periodic table, and group 3A elements tend to have a +3 oxidation state.

The periodic table is a chart of elements that organizes the chemical elements by their atomic number, electron configuration and recurring chemical properties. The elements are arranged in order of increasing atomic number, with the elements in each period or row having the same number of electron shells. It is one of the most important tools in Chemistry and is widely used by scientists, engineers and students alike. The periodic table helps scientists predict the properties of elements, make predictions about the reactivity of elements, and further their understanding of atomic structures and bonding.

Additionally, the electron configuration of Al is [Ne]₃s² 3p³, which only contains one valence electron. Because of this, Al is highly electronegative, meaning it tends to form cations with a +3 charge when it is oxidized.

To learn more about periodic table
https://brainly.com/question/1173237
#SPJ4

The glass electrode is a commonly used electrode in pH measurement, and it requires a combination electrode setup to accurately measure the pH of a solution.

This setup involves the use of both a glass electrode and a reference electrode. The glass electrode measures the pH of the solution by measuring the potential difference between the solution and the internal reference solution inside the electrode.

The standard electrode most commonly used in the combination electrode setup for pH measurement is the Ag/AgCl electrode. This electrode is made up of a silver wire coated with silver chloride, and it is immersed in a solution containing a stable concentration of chloride ions. This electrode is commonly used as the reference electrode due to its stable potential and reproducible response.

To know more about electrode  visit:-

https://brainly.com/question/17060277

#SPJ11

Ether solvents are necessary for Grignard reactions because they provide a highly polar environment that enables the formation of the Grignard reagent.

A polar environment is a type of environment characterized by extreme cold, low temperatures, and very little precipitation. It is found in the regions around the Earth’s poles and includes the Arctic and Antarctic regions. Temperatures in polar environments can range from -60°C to as low as -90°C.

The Grignard reagent is a very reactive species and requires a solvent that can provide a non-nucleophilic environment. Ethers are particularly suitable for this purpose, as they have an oxygen atom that can interact with the magnesium, and their non-polar nature helps to stabilize the Grignard reagent. Additionally, ether solvents are relatively unreactive, which greatly reduces the possibility of side reactions.

To learn more about polar environment
https://brainly.com/question/31057400
#SPJ4

Distilled water with sodium chloride dissolved in it would be a _neutral because it is neither an aid nor a base

Distilled water with sodium chloride dissolved in it would be a neutral solution because neither sodium chloride nor water are acidic or basic. Sodium chloride dissociates into Na+ and Cl- ions in water, but neither of these ions react with water to produce H+ or OH- ions.

Therefore, the concentration of H+ and OH- ions in the solution remains unchanged, and the pH of the solution remains at 7, which is considered neutral. It is important to note that even though sodium chloride is a salt, not all salts necessarily produce neutral solutions.

Some salts can produce acidic or basic solutions, depending on the nature of the salt and the solvent used.

To learn about distilled water:

https://brainly.com/question/18371491

#SPJ4

The following, when added to a saturated solution of AgCl, will cause a decrease in the molar concentration of Ag+ relative to the original solution is  1 and 3 only.

Concentration is the ability to focus attention on a single task or thought, while blocking out distractions or other external stimuli. It involves a person’s ability to process information and maintain focus on the task at hand, and is an important skill in many areas of life, such as academics, sports, and work. Concentration can be improved with practice, and can be hindered by factors such as anxiety, boredom, or fatigue.

To learn more about concentration

https://brainly.com/question/28564792

#SPJ4

Answer:

32 moles of Oxygen

Explanation:

C3H8 + O2    -->     CO2 + H2O

There are 3 Cs on the left so you need to make 3 Cs on the right

C3H8 + O2   -->   3 CO2 + H2O

There are 8 Hs so you need to make 8 Hs on the right

4 times H2 makes 8      so put a 4 in front of H2

C3H8 + O2   -->   3 CO2 + 4 H2O

Then find the number of oxygen on the right

3 times O2 + 4 times O

6 + 4 = 10 Os

So put 5 in front of O2 to make 10

because 5 times 2 is 10

C3H8 + 5 O2   -->   3 CO2 + 4 H2O

Now it is balanced

and you can check

Left: C= 3 H= 8 O= 10

Right: C= 3 H= 8 O= 6+4

Now you need to find how many moles of oxygen are necessary to react to 4 moles of C3H8

4 moles of C3H8 is just 4 C3H8

Just multiply the whole equation by 4

4 C3H8 + 20 O2   -->   12 CO2 + 16 H2O

C = 12 H = 32 O = 40

C = 12 H = 32 O = 24 + 16 which is 40

When a number is in front you multiply each element with it

12 times 2Os = 24     16 times 1 O

So 32 moles are necessary to react to 4 moles of C3H8

After the marathon, her total body water content (the total amount of water in his body) will decrease. Therefore, the correct option is C.

Woman loses water through sweating while running marathon in hot weather to keep her body cool. She is not replenishing lost electrolytes through sweating, but rather replenishing lost water by drinking distilled water. This lowers the total amount of water in his body (hypotonic hydration) after the marathon and lowers the electrolyte concentration in his system. The results of replacing the lost amount of sweat with distilled water are better than other methods.

Therefore, the correct option is C.

Learn more about sweating, here:

https://brainly.com/question/32406800

#SPJ12

Your question is incomplete, most probably the complete question is:

A Woman Runs A Marathon In 90 ºF Weather And Replaces All Volume Lost In Sweat By Drinking Distilled Water. After The Marathon, She Will Have… A. Decreased Intracellular Fluid Volume. B. Increased Intracellular Osmolarity. C. Decreased Total Body Water (Total Volume Of Water In Her Body). D. Decreased Plasma Osmolarity. E. Decreased Hematocrit (Percentage Of

A woman runs a marathon in 90 ºF weather and replaces all volume lost in sweat by drinking distilled water. After the marathon, she will have…

a. decreased intracellular fluid volume.

b. increased intracellular osmolarity.

c. decreased total body water (total volume of water in her body).

d. decreased plasma osmolarity. e. decreased hematocrit (percentage of blood volume occupied by red blood cells).

Dispersion forces are stronger in atoms and molecules than in smaller and lighter ones. The average distance between the valence electrons and nuclei of a larger atom or molecule and a smaller one is greater.

There are London forces between all kinds of molecules. The molecule's molar mass and, to a lesser extent, its surface area (greater surface area, stronger London forces) both influence the molecule's London forces' strength (more electrons, stronger London forces), respectively.

Uneven distribution of electrons within an atom results in London dispersion forces. On either side of the atom, this results in a charge that is slightly negative ( ) and slightly positive. The construction of a temporary dipole has begun. A temporary dipole on a neighboring atom or molecule can be created by this dipole.

Learn more about London forces:

brainly.com/question/1454795

#SPJ4

The electron configuration of the atom with the most negative (and largest magnitude) electron affinity would be [Ne] 3s² 3p⁶, which belongs to the chloride ion (Cl⁻).

The electron affinity of an atom is the energy released when an electron is added to a neutral atom in the gas phase to form a negatively charged ion. The most negative electron affinity (i.e. the largest magnitude) belongs to the atom that releases the most energy upon gaining an electron.

The electron affinity generally increases across a period from left to right in the periodic table. Therefore, the atom with the most negative electron affinity is likely to be found on the right-hand side of the periodic table.

Based on this, the electron configuration of the atom with the most negative electron affinity would be expected to have a nearly filled valence shell, making it energetically favorable to accept an additional electron. One example of such an atom is chlorine (Cl), which has the electron configuration [Ne] 3s² 3p⁵. The addition of an electron to chlorine results in a stable chloride ion with a full 3p subshell.

To know more about electron affinity here

https://brainly.com/question/11302894

#SPJ4

A 1.00 L flask is charged with 0.0400 mol of N2O4. At equilibrium at 373K, 0.0055 mol of N2O4 remains. Keq for this reaction is 0.8656.

Chemical equilibrium refers to the situation in a chemical process where both the reactants and products are present in concentrations that have no further tendency to vary over time, preventing any discernible change in the system's characteristics. When the forward reaction and the reverse reaction go forward at the same speed, this condition arises. The forward and backward reactions often have equal, if not zero, reaction rates. The concentrations of the reactants and products do not change on a net basis as a result. Dynamic equilibrium is the name given to such a situation.

N₂O₄(g) = 2NO₂(g)

Initially, [N₂O₄] = 0.04 M  & [NO₂] = 0 M

Let at eqb, [N₂O₄] = (0.04 - x) M  & [NO₂] = 2x M

But given that at equilibrium, [N₂O₄] = 0.0055 M = 0.04 - x

or, x = 0.0345 M

Thus, at equilibrium, [NO₂] = 2x = 0.069 M

Hence Kc = [NO₂]₂/[N₂O₄] = (0.069)₂/(0.0055) = 0.8656.

Therefore, Keq is 0.8656.

Learn more about Equilibrium:

https://brainly.com/question/29708621

#SPJ4

It is important to slowly raise the temperature of a melting point (MP) apparatus in order to obtain an accurate reading because sudden changes in temperature can cause the substance being tested to melt at a temperature lower than its true melting point.

This can result in an inaccurate melting point reading, which can affect the identification and characterization of the substance. Slowly raising the temperature allows the substance to gradually reach its true melting point, which results in a more accurate reading.

Proper techniques for obtaining accurate melting point readings include making sure that the sample is finely ground and packed tightly into the melting point capillary tube, using a properly calibrated MP apparatus, and raising the temperature at a slow and steady rate. It is also important to make sure that the substance being tested is free from impurities, which can lower the melting point and affect the accuracy of the reading.

To begin, the MP apparatus should be set up and calibrated according to the manufacturer's instructions. The sample should then be prepared by grinding it to a fine powder and packing it tightly into the capillary tube. The tube should be inserted into the MP apparatus and the temperature should be slowly raised at a rate of 1-2°C per minute until the sample begins to melt. The melting point should be recorded when the sample is observed to be completely melted. If the melting point range is broad, it may be an indication of impurities in the sample, and further purification or analysis may be necessary.

To know more about melting point

brainly.com/question/29578567

#SPJ11

The mass of 1.0 mole of the compound is 2.89 x 10^25 grams, we can say that understanding the concepts of gram-formula mass and mole is crucial in performing calculations in chemistry.

we need to first understand what the gram-formula mass and mole are. The gram-formula mass is the sum of the atomic masses of all the atoms in a formula unit of a compound, expressed in grams. The mole, on the other hand, is a unit of measurement used in chemistry to represent a specific number of atoms or molecules. One mole of any substance contains 6.022 x 10^23 particles.
So, if the gram-formula mass of the compound is 48 grams, this means that one formula unit of the compound has a mass of 48 grams. To find the mass of 1.0 mole of the compound, we need to use the mole concept. Since one mole of any substance contains 6.022 x 10^23 particles, we can find the mass of 1.0 mole of the compound by multiplying the gram-formula mass by the Avogadro constant (6.022 x 10^23):
Mass of 1.0 mole of the compound = 48 g/mol x 6.022 x 10^23 particles/mol
= 2.89 x 10^25 g
Therefore, the mass of 1.0 mole of the compound is 2.89 x 10^25 grams, we can say that understanding the concepts of gram-formula mass and mole is crucial in performing calculations in chemistry. The gram-formula mass helps us to find the mass of a single formula unit of a compound, while the mole allows us to relate the number of particles to the mass of a substance. By using these concepts, we can determine the amount of a compound needed for a reaction, the number of atoms or molecules in a given sample, and many other important calculations in chemistry.

To know more about mole visit :

https://brainly.com/question/29367909

#SPJ11

The process by which an atom changes into another atom through a nuclear reaction is called nuclear transmutation. Nuclear transmutation can occur through several processes, including radioactive decay, nuclear fusion, and nuclear fission.

In radioactive decay, an unstable atom emits particles or energy in form of radiation, resulting in formation of a new, more stable atom. In nuclear fusion, two or more atomic nuclei combine to form a heavier nucleus, releasing a large amount of energy in process. In nuclear fission, a heavy atomic nucleus is split into two or more smaller nuclei, releasing a large amount of energy and often additional neutrons that can cause a chain reaction. Nuclear transmutation is the basis for many applications in energy generation.

To know more about radioactive decay, here

brainly.com/question/1770619

#SPJ1

A condition known as surface tension is the reason hair/sand stick together when wet.

It actually drains into the tiny pores between the grains, not disappearing. The sand is saturated when all of these pores are filled with water; this indicates that the sand is unable to absorb any additional water.

Adhesion is what makes a drop of water a drop. Water is the most cohesive of all the non-metallic liquids. Because of its cohesive properties, water is sticky and forms drops, but chemistry and electricity are involved in more detail to make this possible.

Learn more about surface tension:

brainly.com/question/27952185

#SPJ4

Benzoyl chloride is a lachrymator causing eye irritation and tearing.

What is a lachrymator and how does benzoyl chloride act as one?

The correct answer is (b) benzoyl chloride. Benzoyl chloride is a lachrymator, which means it can cause tearing and irritation to the eyes. Methanol and sodium hydroxide are not lachrymators, and sodium chloride is a common salt that does not have any lachrymatory properties.

A lachrymator is a substance that can cause tearing and irritation to the eyes. Benzoyl chloride is one such substance that acts as a lachrymator. It is commonly used in the production of dyes, pharmaceuticals, perfumes, and resins. When exposed to air, benzoyl chloride releases a vapor that reacts with the moisture in our eyes and respiratory system, causing inflammation, burning, and tearing. Eye irritation is a common symptom of exposure to lachrymators, and it can be harmful if the exposure is prolonged or at high concentrations. Therefore, caution must be taken when handling such substances to avoid any unnecessary harm.

To learn more about lachrymator, visit: https://brainly.com/question/29640785

#SPJ4

The cell potential is 0.94 V.

To find the cell potential of the given cell, we can use the standard reduction potentials from a table.

The half-reactions are:

[tex]Ag^+ + e^- → Ag E° = +0.80 V[/tex]

[tex]Sn^2^+ + 2e^- → Sn E° = -0.14 V[/tex]

The overall cell potential (Ecell) can be calculated as sown below.

Ecell = E°cathode - E°anode

Ecell = (+0.80 V) - (-0.14 V)

Ecell = +0.94 V

Therefore, the cell potential of the given cell is +0.94 V.

To learn about cell potential:

https://brainly.com/question/28455231

#SPJ4

Before starting a titration equation, we need to find the pH of this initial solution.

Titration is a method of chemical analysis where the quantity of a sample's constituents is determined by adding a precisely measured amount of a different substance to which the desired ingredient will react in a specific, known proportion. A burette, which is simply a long, graduated measuring tube with a stopcock and a delivery tube at its bottom end, is used to gradually administer a standard solution of titrating reagent, or titrant, to a specified concentration. When the equivalence point is achieved, the addition is terminated.

An exact comparable quantity of titrant has been applied to the sample at the equivalence point of a titration. The end point is the experimental point at which a signal indicating the end of the reaction appears. The indicator's colour changing or a change in an electrical characteristic that is being monitored throughout the titration can both serve as this indication. The titration error, which is the difference between the end point and the equivalence point, is minimised by selecting an appropriate end-point signal and a technique for detecting it.

Learn more about Titration:

https://brainly.com/question/13307013

#SPJ4

a) The pH of a 0.20 M solution of methanoic acid is 2.10.and b) The pH of a solution of 6.8 g of solid methanoic acid dissolved in 2.0 L of distilled water is 2.99.

a) For a 0.20 M solution of methanoic acid:

The balanced equation for the ionization of methanoic acid is:

HCOOH + H₂O ⇌ H₃O⁺ + HCOO⁻

The equilibrium constant expression for this reaction is:

Kₐ = [H₃O⁺][HCOO⁻]/[HCOOH]

Since methanoic acid is a weak acid, we can assume that the concentration of H₃O⁺ and HCOO⁻ ions produced is much smaller than the initial concentration of methanoic acid. Therefore, we can use the approximation that [HCOOH] ≈ [HCOOH]₀, where [HCOOH]₀ is the initial concentration of methanoic acid.

Let x be the concentration of H₃O⁺ and HCOO⁻ ions produced. Then:

Kₐ = x²/[HCOOH]₀

Rearranging and solving for x, we get:

x = √(Kₐ[HCOOH]₀) = sqrt(1.6x10⁻⁴ x 0.20) = 0.008

Therefore, [H₃O⁺] = [HCOO⁻] = 0.008 M

The pH of the solution can be calculated using the definition of pH:

pH = -log[H₃O⁺] = -log(0.008) = 2.10

Therefore, the pH of a 0.20 M solution of methanoic acid is 2.10.

b) For a solution of 6.8 g of solid methanoic acid dissolved in 2.0 L of distilled water:

First, we need to calculate the number of moles of methanoic acid in the solution:

molar mass of HCOOH = 46.03 g/mol

moles of HCOOH = mass / molar mass = 6.8 g / 46.03 g/mol = 0.148 mol

The concentration of the methanoic acid solution is:

concentration = moles / volume = 0.148 mol / 2.0 L = 0.074 M

Since the concentration of the solution is less than the concentration used in part (a), we can assume that the ionization of methanoic acid is negligible. Therefore, the pH of the solution will be determined by the concentration of HCOOH.

Using the definition of pH, we get:

pH = -log[H₃O⁺] = -log(Kₐ × [HCOOH]0) / 2 = -log(1.6x10⁻⁴ x 0.074) / 2 = 2.99

Therefore, the pH of the solution of 6.8 g of solid methanoic acid dissolved in 2.0 L of distilled water is 2.99.

To learn more about pH, refer to:

https://brainly.com/question/172153

#SPJ4

The following is not a property of gases so the answer is "density of gases is much larger than those of solids or liquids" is not a property of gases.The correct answer is: "None of these answers." All of the statements listed in the question are properties of gases.

Gases are a state of matter that do not have a fixed shape or volume, and they expand to fill their containers completely. Gases have low densities compared to solids or liquids, which means that they are much lighter in weight. They are also highly compressible, meaning that their volume can be reduced by increasing the pressure exerted on them.

The density of gases can vary widely, depending on the temperature, pressure, and composition of the gas. For example, the density of helium gas is much lower than that of oxygen gas, due to the differences in their atomic masses. However, all gases are less dense than solids or liquids, and they all exhibit the same fundamental properties of gas behavior.

To learn about densities

https://brainly.com/question/29775886

#SPJ4

Full Question:  Which of the following is not a property of gases?

In an oxoacid such as H2SO4, ionizable hydrogen atoms are those bonded to oxygen atoms. This is because the oxygen atoms in oxoacids have a higher electronegativity than hydrogen atoms, making the oxygen atoms more likely to attract electrons towards themselves.

As a result, the hydrogen atoms in oxoacids are more likely to dissociate and form hydrogen ions (H+). In the case of H2SO4, both hydrogen atoms are bonded to oxygen atoms, making both of them ionizable. This property of oxoacids is important in understanding their acidity and reactivity in chemical reactions.

In an oxoacid such as H2SO4 (sulfuric acid), ionizable hydrogen atoms are those bonded to oxygen atoms. Oxoacids are acids containing hydrogen, oxygen, and another element. In H2SO4, the ionizable hydrogen atoms can be released as H+ ions when the acid dissociates in water, forming sulfate ions (SO4^2-) and two H+ ions. The hydrogen atoms are bonded to oxygen atoms, making them susceptible to ionization due to the high electronegativity of oxygen. The electronegative oxygen atoms attract the bonding electrons, weakening the H-O bond and facilitating the release of hydrogen ions.

To know more about Oxaacid visit:

https://brainly.com/question/21795128

#SPJ11