True, the heavier truck has more energy of motion because kinetic energy is dependent on both mass and velocity.
Since both trucks are traveling at the same speed but one has more mass due to being fully loaded, the heavier truck will have greater kinetic energy.
The formula for kinetic energy is KE = (1/2)mv^2, where KE represents kinetic energy, m represents mass, and v represents velocity.
In this case, we have two trucks traveling at the same speed. However, one of the trucks is fully loaded, so it has more mass compared to the other truck. Since the velocity is the same for both trucks, the one with greater mass will have greater kinetic energy.
The relationship between kinetic energy and mass is linear, meaning that as mass increases, kinetic energy also increases proportionally. In contrast, the relationship between kinetic energy and velocity is quadratic, meaning that kinetic energy increases with the square of the velocity.
So, in the scenario described, the heavier truck will indeed have more energy of motion, or kinetic energy, compared to the lighter truck. This is because the increase in mass has a greater impact on the overall kinetic energy than the constant speed at which both trucks are traveling.
To learn more about speed, refer below:
https://brainly.com/question/28224010
#SPJ11
Which frequencies of light are absorbed by the apple?.
The frequencies of light absorbed by an apple include those in the visible range, specifically in the blue and green wavelengths.
This is because apples predominantly reflect red light, which gives them their characteristic red color. Apples absorb blue and green light frequencies. To explain further, when light hits an object, some wavelengths are absorbed while others are reflected. In the case of a red apple, it absorbs shorter wavelengths (blue and green) and reflects the longer wavelength (red), resulting in the red color we perceive.
However, the pigments in the apple, such as chlorophyll and carotenoids, absorb specific wavelengths of light and reflect others.
To know more about wavelengths, visit:
https://brainly.com/question/13533093
#SPJ11
sinusoidal water waves are generated in a large ripple tank. the waves travel at 20 cm/s and their adjacent crests are 5.0 cm apart. the time required for each new whole cycle to be generated is: 0.5 s T/F
Given statement is false. The correct statement would be: "The time required for each new whole cycle to be generated is 0.25 s."
To determine if the statement "The time required for each new whole cycle to be generated is 0.5 s" is true or false, we need to calculate the wave period using the given information.
The given data:
- Wave speed (v) = 20 cm/s
- Wavelength (λ) = 5.0 cm (distance between adjacent crests)
- Wave period (T) = ?
The formula to calculate the wave period is T = λ / v.
Step 1: Substitute the given values into the formula.
T = (5.0 cm) / (20 cm/s)
Step 2: Calculate the wave period.
T = 0.25 s
The calculated wave period is 0.25 s, not 0.5 s. Therefore, the statement is false. The correct statement would be: "The time required for each new whole cycle to be generated is 0.25 s."
Learn more about wave period here,
https://brainly.com/question/7327894
#SPJ11
Choose the correct explanation, where is the asteroid belt located, and why.
The asteroid belt lies between the orbits of Jupiter and Saturn. It exists because of orbital resonances with Jupiter.
The asteroid belt lies between the orbits of Mars and Jupiter. It exists because of orbital resonances with Mars.
The asteroid belt lies between the orbits of Jupiter and Saturn. It exists because of orbital resonances with Saturn.
The asteroid belt lies between the orbits of Mars and Jupiter. It exists because of orbital resonances with Jupiter.
Between Mars and Jupiter's orbits is where the asteroid belt is located. Because of orbital resonances with Mars, it exists. Here option B is the correct answer.
The asteroid belt is a region in our solar system that contains numerous small celestial bodies known as asteroids, with some as large as 590 miles (940 kilometers) in diameter. It is located between the orbits of Mars and Jupiter, with an average distance of about 280 million miles (450 million kilometers) from the Sun.
The asteroid belt exists because of gravitational interactions with Jupiter, which prevented the formation of a planet between Mars and Jupiter. However, the asteroids in the belt are not in stable orbits and can be perturbed by the gravitational influence of other planets, leading to collisions and ejections from the belt.
In particular, the asteroid belt's location and shape are strongly influenced by orbital resonances with Mars. Orbital resonance occurs when two objects orbiting the Sun exert a regular gravitational influence on each other, causing their orbits to be synchronized. As Mars orbits the Sun, it exerts a regular gravitational pull on the asteroids in the belt, causing them to follow specific orbital patterns.
To learn more about asteroid belt
https://brainly.com/question/25531422
#SPJ4
Complete question:
Choose the correct explanation, where is the asteroid belt located, and why.
A - The asteroid belt lies between the orbits of Jupiter and Saturn. It exists because of orbital resonances with Jupiter.
B - The asteroid belt lies between the orbits of Mars and Jupiter. It exists because of orbital resonances with Mars.
C - The asteroid belt lies between the orbits of Jupiter and Saturn. It exists because of orbital resonances with Saturn.
D - The asteroid belt lies between the orbits of Mars and Jupiter. It exists because of orbital resonances with Jupiter.
a patient has a temperature of 38.5 °c. what is the temperature in degrees fahrenheit?
Explanation:
F = 9/5 C +32
9/5 ( 38.5) + 32 = 101.3 F
The patient's temperature (38.5 °) in degrees Fahrenheit is 101.3 °F.
To convert a temperature from degree Celsius to degrees Fahrenheit, you can use the following formula: (Celsius * 9/5) + 32. In this case, the patient's temperature is 38.5 °C.
Applying the formula, we have: (38.5 * 9/5) + 32. Firstly, calculate 38.5 multiplied by 9/5, which is 69.3. Then, add 32 to this value: 69.3 + 32 = 101.3.
Therefore, the patient's temperature in degrees Fahrenheit is 101.3 °F. This conversion allows medical professionals to understand and compare temperatures in different units, ensuring appropriate care for the patient.
Learn more about Fahrenheit here: https://brainly.com/question/26141817
#SPJ11
Tarzan, with a mass of 80.0 kg, wants to swing across a ravine on a vine, but the cliff on the far side of the ravine is 1.10 m higher than the cliff where Tarzan is now, and 2.10 m higher than Tarzan's lowest point in his swing. Use g = 9.80 m/s2.
(a) If Tarzan wants to reach the cliff on the far side, how much kinetic energy (at least) must he have when he jumps off the cliff where he starts?
__ J
(b) How fast is Tarzan going at the bottom of his swing?
__ m/s
(c) If Tarzan swings along a circular arc of radius 9.00 m, what is the tension in the vine when Tarzan reaches the lowest point in his swing?
__ N
Tarzan must have at least 862 J of kinetic energy when he jumps off the cliff where he starts. Tarzan is going 6.51 m/s at the bottom of his swing. the tension in the vine when Tarzan reaches the lowest point in his swing is 381 N.
(a) To reach the cliff on the far side, Tarzan needs to have enough kinetic energy to raise his center of mass by a height of 1.10 m. The minimum kinetic energy required is equal to the change in potential energy, given by:
ΔPE = mgh = (80.0 kg)(9.80 m/s²)(1.10 m) = 862 J
Therefore, Tarzan must have at least 862 J of kinetic energy when he jumps off the cliff where he starts.
(b) At the bottom of his swing, Tarzan's gravitational potential energy is at its minimum, so all of his initial kinetic energy is converted to gravitational potential energy. Using the conservation of energy principle, we can find Tarzan's speed at the bottom of his swing by equating his initial kinetic energy to his potential energy at the bottom:
KE = PE
(1/2)mv² = mgh
Solving for v, we get:
v = ≡(2gh) = √(2(9.80 m/s²)(2.10 m)) = 6.51 m/s
Therefore, Tarzan is going 6.51 m/s at the bottom of his swing.
(c) At the bottom of his swing, Tarzan experiences a centripetal force due to the tension in the vine, which is given by:
F = mv²/r
where v is his speed at the bottom of his swing and r is the radius of the circular arc. Substituting the given values, we get:
F = (80.0 kg)(6.51 m/s)²/9.00 m = 381 N
Therefore, the tension in the vine when Tarzan reaches the lowest point in his swing is 381 N.
Learn more about kinetic energy
https://brainly.com/question/26472013
#SPJ4
when switch s is closed to the left, charge begins to accumulate on the capacitor. charge cannot accumulate indefinitely because:
Charge cannot accumulate indefinitely because the capacitor has a maximum capacitance and can only store a limited amount of charge.
A capacitor is a device that can store electrical charge. When a switch s is closed to the left, charge begins to flow onto the capacitor plates and accumulate there. However, the capacitor has a limited capacitance, which means it can only store a certain amount of charge. Once the capacitor has reached its maximum capacitance, it cannot store any more charge.
In summary, charge cannot accumulate indefinitely on a capacitor because it has a maximum capacitance and can only store a limited amount of charge. Once the capacitor has reached its maximum capacitance, it cannot store any more charge.
To know more about charge., visit;
https://brainly.com/question/18102056
#SPJ11
What happens to angular momentum when net torque is zero?
Answer:
it will be in rotational equilibrium and not able to acquire angular acceleration
What is the wavelength of an electron of energy 25 ev ?.
The wavelength of an electron with energy 25 eV is approximately 5.35 x [tex]10^{-10}[/tex] meters.
To find the wavelength of an electron with energy 25 eV, we can use the de Broglie wavelength formula
λ = h/p
Where λ is the wavelength, h is the Planck constant (6.626 x [tex]10^{-34}[/tex] J*s), and p is the momentum of the electron.
The momentum of an electron with energy E can be found using the formula
p = √(2mE)
Where m is the mass of the electron.
Substituting the given values, we get
p = √(2(9.109 x [tex]10^{-31}[/tex] kg)(25 eV)(1.602 x [tex]10^{-19}[/tex] J/eV)) = 1.24 x [tex]10^{-24}[/tex]kg m/s
Now, we can calculate the wavelength
λ = h/p = (6.626 x [tex]10^{-34}[/tex] J*s)/(1.24 x [tex]10^{-24}[/tex]kg m/s) = 5.35 x [tex]10^{-10}[/tex] m
Therefore, the wavelength of an electron with energy 25 eV is approximately 5.35 x [tex]10^{-10}[/tex] meters.
To know more about wavelength here
https://brainly.com/question/10048980
#SPJ4
1. 33kg of ice at 0. 00 celsius is added to an 8. 25kg tub of water at a warmer temperature. If the final temperature is 15. 7 celcius, what was the initial temperature, ti, of the warmer in the tub?
1.33kg of ice at 0.00 celsius is added to an 8.25kg tub of water at a warmer temperature. If the final temperature is 15. 7 celcius, then the initial temperature of the warmer in the tub was 25.3°C.
We can use the principle of conservation of energy to solve this problem. The energy lost by the ice as it melts is equal to the energy gained by the water as it warms up. The energy lost or gained is given by
Q = mcΔT
Where Q is the energy lost or gained, m is the mass of the substance, c is its specific heat capacity, and ΔT is the change in temperature.
First, let's calculate the energy gained by the water
Qwater = (8.25 kg)(4.18 J/(g·°C))(15.7°C - ti)
Where we have used the specific heat capacity of water, which is 4.18 J/(g·°C).
Next, let's calculate the energy lost by the ice
Qice = (1.33 kg)(334 J/g)
Where we have used the heat of fusion of ice, which is 334 J/g.
Since the ice melts at 0°C, we can set the energy lost by the ice equal to the energy gained by the water
Qice = Qwater
(1.33 kg)(334 J/g) = (8.25 kg)(4.18 J/(g·°C))(15.7°C - ti)
Solving for ti, we get
ti = 25.3°C
Therefore, the initial temperature of the warmer in the tub was 25.3°C.
To know more about temperature here
https://brainly.com/question/21979607
#SPJ4
Three parallel plate capacitors, each having a capacitance of 1.0 µF are connected in parallel.
The potential difference across the combination is 100 V. What is the charge on any one of the capacitors?
The charge on any one of the capacitors is 100 µC.
When capacitors are connected in parallel, the equivalent capacitance is the sum of the individual capacitances. In this case, the equivalent capacitance is 3 µF (1 µF + 1 µF + 1 µF = 3 µF).
The formula for capacitance is C = Q/V, where C is the capacitance in farads, Q is the charge in coulombs, and V is the potential difference in volts. Rearranging this formula gives Q = CV.
So, the charge on any one of the capacitors can be found by multiplying the equivalent capacitance (3 µF) by the potential difference (100 V), giving a total charge of 300 µC. Since the capacitors are connected in parallel, each capacitor has the same voltage across it and therefore carries a charge of 100 µC (one-third of the total charge).
Learn more about voltage here:
https://brainly.com/question/13521443
#SPJ11
a bicyclist is stopped at the entrance to a valley, as sketched below: where would the bicyclist have the highest potential energy? (choose one) where would the bicyclist have the lowest potential energy? (choose one) where would the bicyclist have the highest kinetic energy? (choose one) where would the bicyclist have the highest speed? (choose one) would the bicyclist's kinetic energy be higher at d or c? (choose one) would the bicyclist's potential energy be higher at d or c? (choose one) would the bicyclist's total energy be higher at d or c? (choose one) suppose the bicyclist lets off the brakes and coasts down into the valley without pedaling. even if there is no friction or air resistance to slow her down, what is the farthest point the bicyclist could reach without pedaling? (choose one)
The energy that arises from a location is known as potential energy.
The energy attributed to motion is known as kinetic energy.
1. As the highest point on the road, F point has the most potential energy.
2. The lowest potential energy is present at D point, the lowest point on the route.
3. Point B will have the maximum kinetic energy since there, all of point A's potential energy is converted to kinetic energy.
4. At point B, the speed will be at its highest since all of the potential energy has been transformed into kinetic energy.
What is the straightforward meaning of potential energy?Potential energy is a form of stored energy that is dependent on the interactions between different system components. When a
To know more about potential energy visit:
brainly.com/question/24284560
#SPJ4
why are the doppler shift curves for the exoplanet systems 51 pegasi (top) and upsilon andromedae bottom so different in shape?
The doppler shift curves for exoplanet systems 51 Pegasi and Upsilon Andromedae are different in shape because they are caused by different phenomena. The doppler shift curve for 51 Pegasi is caused by the planet orbiting very close to its star, which causes the star's radial velocity to change rapidly and significantly. This creates a very pronounced curve with a steep slope.
On the other hand, the doppler shift curve for Upsilon Andromedae is caused by the gravitational interaction between two gas giant planets orbiting the same star. As the two planets orbit around the star, they pull on each other and cause their mutual orbits to shift slightly. This creates a more gentle curve with a smoother slope.
Overall, the shapes of these doppler shift curves are influenced by factors such as the mass, distance, and orbital characteristics of the planets in the system, as well as the distance between the planet and its star.
The Doppler shift curves for the exoplanet systems 51 Pegasi (top) and Upsilon Andromedae (bottom) are different in shape mainly due to differences in their orbital parameters and the properties of the planets and stars involved.
For 51 Pegasi, the exoplanet has a short orbital period and is closely orbiting a sun-like star. This causes the Doppler shift curve to have a simple, periodic sinusoidal shape.
In contrast, the Upsilon Andromedae system has multiple exoplanets with varying orbital periods and distances from the star. This results in a more complex Doppler shift curve due to the combined gravitational influences of the multiple planets on the star's radial velocity.
In summary, the differences in shape of the Doppler shift curves for 51 Pegasi and Upsilon Andromedae are mainly attributed to the differences in their planetary system configurations and the properties of the planets and stars involved.
To know more about Doppler shift visit:
https://brainly.com/question/15427494
#SPJ11
determine corresponding values of the mean velocity, um, and mean (or bulk) temperature, tm. plot the velocity and temperature distributions. do your values of um and tm appear reasonable
To determine the corresponding values of the mean velocity (um) and mean temperature (tm), we first need to measure the velocity and temperature at different points in the fluid. We can then calculate the mean velocity and temperature using these measurements.
The mean velocity (um) is the average velocity of the fluid over a given area. It is calculated by dividing the total volume flow rate by the cross-sectional area of the flow. The mean temperature (tm) is the average temperature of the fluid over a given area. It is calculated by taking the average of the temperature measurements at different points in the fluid.
To plot the velocity and temperature distributions, we need to measure the velocity and temperature at different points in the fluid and plot them on a graph. We can then connect the data points to get a visual representation of the distribution.
Whether or not the values of um and tm appear reasonable will depend on the specific system being studied. We would need to compare our results to previous studies or theoretical models to determine if our values are reasonable.
learn more about velocity and temperature
https://brainly.com/question/30731456
#SPJ11
The length of a hollow pipe is 216 cm. The air column in the pipe is vibrating and has five nodes. Find the frequency of the sound wave in the pipe. The speed of sound in air is 343 m/s.What is the fundamental frequency; i.e., the lowest frequency the pipe can sustain?
397 Hz is the frequency of the sound wave in the pipe with length 216 cm and the air column in the pipe is vibrating and has five nodes
Define sound wave
The pattern of disruption brought about by the movement of energy through a medium (such as air, water, or any other liquid or solid matter) as it spreads away from the source of the sound is known as a sound wave. Pressure waves are generated by item vibrations that cause sound waves, such as those from a ringing phone.
The frequency of an occurrence is the number of times it repeats itself in a given amount of time. The frequency of wave-like patterns, such as sound, light, electrical signals, and other waves, expresses the number of cycles of the repeated waveform per second.
To learn more about sound wave use:
https://brainly.com/question/16093793
#SPJ4
Determine the kinetic energy of a 625-kg roller coaster car that is moving with a speed of 18.3 m/s.
Work, Energy, and Power: Kinetic Energy
The kinetic energy of the 625-kg roller coaster car moving with a speed of 18.3 m/s is 34,082.225 J.
What is kinetic energy?Kinetic energy is the energy of motion. It is the energy possessed by an object due to its motion. Kinetic energy can be either potential or kinetic. Potential energy is stored energy, and kinetic energy is energy in motion. Kinetic energy is expressed as the product of mass and velocity squared.
Kinetic energy (KE) is the energy possessed by an object due to its motion. It is calculated using the following equation: KE = (1/2) mv2
where m is the mass of the object and v is its velocity.
In this case, the mass of the roller coaster car is 625 kg and its velocity is 18.3 m/s. Therefore, the kinetic energy of the car can be calculated as follows:
KE = (1/2) x 625 kg x (18.3 m/s)2
= 34,082.225 J
Therefore, the kinetic energy of the 625-kg roller coaster car moving with a speed of 18.3 m/s is 34,082.225 J.
To learn more about kinetic energy
https://brainly.com/question/8101588
#SPJ4
As a star ages, it is believed to undergo a variety of changes. One of the last phases of a star's life is to gravitationally collapse into a black hole. What will happen to the orbit of the planets of the solar system if our star (the Sun shrinks into a black hole)? (And of course, this assumes that the planets are unaffected by prior stages of the Sun's evolving stages.) (Circular Motion and Satellite Motion - Lesson 3- Universal Gravitation: Newton's Law of Universal Gravitation)
If our star (the Sun) shrinks into a black hole, the orbit of the planets of the solar system would remain same.
What is the planets' gravitational law?
A more precise formulation of the law is "Whenever one body exerts force upon a second body, the second body exerts an equal and opposite force upon the first body." That is, when a planet pulls on the sun with gravity, the planet pulls on the sun with a force that is comparable in strength.
A star the size of our Sun cannot become a black hole. However, if a black hole of the same mass appeared overnight to replace the Sun, the Solar System would remain intact. The gravitational attraction of a solar-mass black hole would be equal to that of the Sun. The planets would actually keep moving forward in their orbits.
To learn more about gravity, use:
https://brainly.com/question/940770
#SPJ4
suppose of electrons must be transported from one side of an electrochemical cell to another in seconds. calculate the size of electric current that must flow.
The amount of electric current required to transport a certain number of electrons in a given time depends on the charge of each electron and the time interval over which they are transported.
Electrochemical cells are devices that convert chemical energy into electrical energy or vice versa. They typically consist of two electrodes, one anode and one cathode, which are connected by an electrolyte solution. The anode is the electrode where oxidation occurs, and it loses electrons to the electrolyte. The cathode is the electrode where reduction occurs, and it gains electrons from the electrolyte.Energy is a fundamental aspect of our everyday lives, and we use it to power everything from our homes and cars to our electronic devices and appliances. The laws of thermodynamics govern the behavior of energy in physical systems, and they tell us that energy cannot be created or destroyed, only converted from one form to another. This means that although we can transform energy from one form to another, the total amount of energy in a closed system remains constant.In summary, energy is a fundamental concept in physics that refers to the ability of a system to do work, and it is a crucial aspect of our daily lives, powering everything from our bodies to the machines and technology we use.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ11
At what age must children ride in a federally approved safety or booster seat in the rear of the vehicle?
According to the National Highway Traffic Safety Administration (NHTSA), children must ride in a federally approved safety or booster seat in the rear of the vehicle until they are at least 8 years old or until they reach a height of 4 feet 9 inches (145 cm), whichever comes first.
The National Highway Traffic Safety Administration (NHTSA) is the agency within the U.S. Department of Transportation that works to reduce deaths and injuries and economic costs due to motor vehicle crashes. NHTSA works to deliver safer roads by encouraging Americans to make safer choices when they drive, ride, and walk; advancing lifesaving vehicle safety technologies; and supporting state and local police in their efforts to enforce the rules of the road that protect us all. By researching new vehicle safety technologies, mandating their inclusion on new vehicles, and rooting out defects in vehicles and equipment, NHTSA helps protect Americans when they’re on the road. NHTSA conducts research on how vehicle improvements and other technological advances can better protect people in a crash (crashworthiness) and reduce the likelihood of crashes (crash avoidance).
To know more about vehicle safety please visit
https://brainly.com/question/31839772
#SPJ11
34) A heat engine with an efficiency of 30% performs 2500 J of work. How much heat is discharged to the lower temperature reservoir?
A) 5800 J
B) 8300 J
C) 750 J
D) 1400 J
E) 7100 J
The heat is discharged to the lower temperature reservoir is 1400 J.
Efficiency (η) of a heat engine is given by:
η = W/QH
where W is the work done by the engine and QH is the heat absorbed by the engine from the high-temperature reservoir.
We are given the efficiency of the heat engine as 30% and the work done by the engine as 2500 J.
Thus, we can rearrange the above equation to solve for QH:
QH = W/η
Substituting the given values, we get:
QH = 2500 J / 0.30
QH = 8333.33 J
This is the heat absorbed by the engine from the high-temperature reservoir. However, we need to find the heat discharged to the lower temperature reservoir, which is given by the expression:
QL = QH - W
Substituting the values, we get:
QL = 8333.33 J - 2500 J
QL = 5833.33 J
To learn more about Efficiency, click here:
https://brainly.com/question/13154811
#SPJ11
Which type of stress is caused by two plates pushing into one another?.
Explanation:
force or gravitational force
Which one of the following statements concerning capacitors of unequal capacitance connected in series is true? A Each capacitor holds a different amount ofcharge. B. The equivalent capacitance of the circuit is the sum of the individual capacitances. C. The total voltage supplied by the battery is the sum of the voltages across each capacitor. D. The total voltage supplied by the battery is equal to the average voltage across all the capacitors
The correct statement is B. The equivalent capacitance of the circuit is the sum of the individual capacitances.
When capacitors of unequal capacitance are connected in series, the total charge on each capacitor is the same, but the voltage across each capacitor is different. The voltage across each capacitor is inversely proportional to its capacitance, meaning that the capacitor with the largest capacitance will have the smallest voltage across it, and the capacitor with the smallest capacitance will have the largest voltage across it. The equivalent capacitance of the circuit is the reciprocal of the sum of the reciprocals of the individual capacitances. Therefore, the total capacitance is the sum of the individual capacitances. The voltage supplied by the battery is divided among the capacitors, with the voltage across each capacitor depending on its capacitance. Therefore, statement B is true.
Learn more about voltage here:
https://brainly.com/question/13521443
#SPJ11
Two charged objects have an attractive force of 0.080 N. If the charge of one of the objects is increased by a factor of four, and the distance separating the objects is doubled, then what is the new force?
The distance separating the objects is doubled, then the new force is 0.02 N.
What is distance?Distance is a numerical measurement of how far apart two objects or locations are. It is a scalar quantity, meaning it can be expressed in terms of a single numerical value without any associated direction.
The force between two charged objects is given by Coulomb's law:
F = k×(q¹×q²)/r²
where k is the Coulomb's constant, q¹ and q² are the charges of the two objects, and r is the distance between them.
In the given problem, the force between the two objects is 0.080 N. This means that: 0.080 N = k×(q¹×q²)/r²
Now, if the charge of one of the objects is increased by a factor of four, and the distance separating the objects is doubled, then the new force will be given by: F' = k×(4×q²)/(2×r)²
Substituting the original values of k, q², and r in the above equation, we get: F' = 0.080×(4)/(2×r)²
F' = 0.080×(4)/(4×r²)
F' = 0.080/r²
F' = 0.080/4×r²
F' = 0.02 N
Therefore, the new force between the two charged objects is 0.02 N.
To learn more about distance
https://brainly.com/question/26550516
#SPJ4
your apparent weight is equal to your weight group of answer choices in an elevator accelerating upwards. in an elevator in free fall. in an elevator accelerating downwards. in an elevator not accelerating.
Your apparent weight is equal to your weight in an elevator not accelerating.
Apparent weight refers to the force a person feels due to gravity and any other forces acting on them, such as the normal force (the force exerted by a surface that supports an object).
1. In an elevator accelerating upwards: Your apparent weight is greater than your actual weight. This is because the upward acceleration adds to the gravitational force, making you feel heavier.
2. In an elevator in free fall: Your apparent weight is zero. This is because there is no normal force acting on you since the elevator is in free fall, which means you experience weightlessness.
3. In an elevator accelerating downwards: Your apparent weight is less than your actual weight. This is because the downward acceleration is working against the force of gravity, making you feel lighter.
4. In an elevator not accelerating Your apparent weight is equal to your weight because the normal force acting on you is equal to the force of gravity. When the elevator is not accelerating, there is no additional force affecting your apparent weight, so it remains equal to your actual weight.
To know more about accelerating visit:
brainly.com/question/3046924
#SPJ11
A 60 kg skier starts from rest from the top of a 50 m high slope. What is the speed of the skier on reaching the bottom of the slope? (Neglect friction.)
A) 9.8 m/s
B) 31 m/s
C) 41 m/s
D) 22 m/s
The speed of the skier on reaching the bottom of the slope. The answer is B) 31 m/s.
To solve this problem, we can use the conservation of energy principle. Initially, the skier has only potential energy, which is given by mgh, where m is the mass of the skier, g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the slope (50 m). When the skier reaches the bottom of the slope, all of this potential energy is converted to kinetic energy, which is given by (1/2)mv^2, where v is the velocity of the skier.
Setting these two equations equal to each other, we have:
mgh = (1/2)mv^2
Simplifying, we get:
v = sqrt(2gh)
Substituting the given values, we have:
v = sqrt(2 x 9.8 m/s^2 x 50 m) = 31 m/s
Therefore, the answer is B) 31 m/s.
It's important to note that neglecting friction is an idealized assumption, as frictional forces are present in most real-world situations. However, this assumption is often made in physics problems to simplify the calculations and focus on the main concepts.
To know more about skier click here:
https://brainly.com/question/1503665
#SPJ11
a 2-m wire with a mass of 60 g, is under tension. a transverse wave, for which the frequency is 550 hz, the wavelength is 0.7 m, and the amplitude is 4.9 mm, is propagating on the wire. the time for a crest of this wave to travel the length of the wire is closest to
To find the time for a crest of the wave to travel the length of the wire, we need to use the formula:velocity = frequency x wavelengthFirst, we need to find the velocity of the wave on the wire. The wave is a transverse wave, which means it propagates perpendicular to the direction of the tension force.
The velocity of a transverse wave on a wire under tension is given by the formula: velocity = sqrt(tension / linear density) where tension is the tension force in the wire and linear density is the mass per unit length of the wire. We are given that the wire has a mass of 60 g and a length of 2 m, so its linear density is linear density = mass / length = 60 g / 2 m = 30 g/m We are not given the tension force in the wire, so we cannot find the exact velocity of the wave. However, we can use the given frequency and wavelength to find the closest value of the time for a crest of the wave to travel the length of the wire.
Using the formula for velocity and the given frequency and wavelength, we have: velocity = frequency x wavelength = 550 Hz x 0.7 m = 385 m/s Now, we can use this velocity to find the time for a crest of the wave to travel the length of the wire: time = length / velocity = 2 m / 385 m/s = 0.0052 s Therefore, the closest value of the time for a crest of the wave to travel the length of the wire is 0.0052 s. So, the time for a crest of this wave to travel the length of the 2-m wire is closest to 0.0052 seconds.
To know more about velocity visit:
https://brainly.com/question/17127206
#SPJ11
an ac voltage of the form dv5 90.0 sin 350t, where dv is in volts and t is in seconds, is applied to a series rlc circuit. if r5 50.0 v, c5 25.0 mf, and l5 0.200 h, find (a) the impedance of the circuit, (b) the rms current in the circuit, and (c) the average power delivered to the circuit
A. The impedance of the RLC circuit 50.08 Ω, B The rms current can be calculated using the equation 1.79 A. and The average power delivered to the circuit can be calculated using the equation 178.5 W.
What is circuit?A circuit is a closed path that allows electricity to flow from one point to another. It is composed of various electrical components, such as resistors and capacitors, that together form a complete electrical system. Circuits are used in a wide range of applications, from powering a simple light bulb to controlling complex machines in industrial settings.
(a) The impedance of the RLC circuit can be calculated using the equation Z = √(R2 + (Xc - Xl)2). Here, Xc = 1/(2πfC) and Xl = 2πfL. Therefore,
Z = √(502 + (1/(2π(350)(25.0e−3)) - 2π(350)(0.2))2)
= √(502 + (1.0044 - 28.27)2)
= √(2501.7525)
= 50.08 Ω
(b) The rms current can be calculated using the equation I = V/Z = (90.0)/50.08 = 1.79 A.
(c) The average power delivered to the circuit can be calculated using the equation P = I2R = (1.79)2(50) = 178.5 W.
To learn more about circuit
https://brainly.com/question/2969220
#SPJ4
the international space station makes 15.65 revolutions per day in its orbit around the earth. part a assuming a circular orbit, how high is this satellite above the surface of the earth? express your answer in kilometers to three significant figures.
The International Space Station (ISS) is approximately 401 kilometers above the Earth's surface, considering three significant figures.
The International Space Station (ISS) orbits Earth with a frequency of 15.65 revolutions per day. To find its altitude above Earth's surface, we can use the formula for the period of a satellite in a circular orbit: T = 2π√(a³/GM), where T is the period, a is the semi-major axis, G is the gravitational constant, and M is Earth's mass.
First, we need to find the period (T) in seconds: T = (24 hours/day * 60 minutes/hour * 60 seconds/minute) / 15.65 revolutions/day ≈ 5556 seconds/revolution.
Now, rearrange the formula to solve for a: a = [tex][GMT^{2} /4\pi ^{2} ]^{1/3}[/tex] . Using G = 6.674×10⁻¹¹ m³/kg/s² and M = 5.972×10²⁴ kg, we get a ≈ 6,771,721 meters.
To find the height (h) above Earth's surface, subtract Earth's radius (R) from a: h = a - R. Using R ≈ 6,371,000 meters, we get h ≈ 400,721 meters.
Thus, the ISS is approximately 401 kilometers above the Earth's surface, considering three significant figures.
Learn more about The International Space Station here:
https://brainly.com/question/28598375
#SPJ11
How does the number of barred spirals in the universe compare to the number of ordinary spirals?.
Barred spirals are a type of galaxy that have a bar-shaped structure running through their centers, while ordinary spirals have a central bulge and arms that spiral outwards. Based on observations, it's estimated that roughly 30-35% of spiral galaxies are barred, with the remaining 65-70% being ordinary. However, it's important to note that these percentages may not be completely accurate, as different studies may define and identify barred spirals differently. Additionally, the overall number of galaxies in the universe is still uncertain and difficult to estimate, but current estimates suggest that there may be around 2 trillion galaxies in the observable universe alone.
Hi! Barred spiral galaxies and ordinary spiral galaxies are two distinct types of galaxies found in the universe. Barred spirals have a central bar-shaped structure, while ordinary spirals do not.
In general, it is estimated that about two-thirds of spiral galaxies in the universe are barred spirals, while the remaining one-third are ordinary spirals. This indicates that barred spirals are more common than ordinary spirals in the universe.
To know more about Barred spirals visit:
brainly.com/question/24420400
#SPJ11
the distance to the north star, polaris, is approximately 6.44 3 1018 m. (a) if polaris were to burn out today, how many years from now would we see it disappear? (b) what time interval is required for sunlight to reach the earth? (c) what time interval is required for a microwave signal to travel from the earth to the moon and back?
A. the light to reach us, so we would see it disappear 6.72 x 10⁷ years from now, B. the time interval is 8 minutes. and C. the time interval is 2.5 seconds.
What is light ?Light is a form of energy that is visible to the human eye. It exists in many forms, such as natural light from the sun, artificial light from a light bulb, and even invisible forms such as X-rays and ultraviolet-radiation. Light is made up of tiny particles called photons which are produced when an atom is excited by heat or electricity.
(a) If Polaris were to burn out today, it would take approximately 6.44 3 10¹⁸ m divided by the speed of light (3.0 x 10⁸ m/s) which equals 2.14 x 10¹⁰ seconds (or 6.72 x 10⁷ years) for the light to reach us, so we would see it disappear 6.72 x 10⁷ years from now.
(b) The time interval required for sunlight to reach the Earth is about 8 minutes. This is because the distance from the Sun to the Earth is about 1.5 x 10⁸ km, and
the speed of light is 3.0 x 10⁸ m/s,
so the time interval is approximately 1.5 x 10⁸ km / 3.0 x 10⁸ m/s = 8 minutes.
(c) The time interval required for a microwave signal to travel from the Earth to the Moon and back is about 2.5 seconds.
This is because the distance from the Earth to the Moon is about 3.84 x 105 km, and the speed of light is 3.0 x 10⁸ m/s,
so the time interval is approximately 3.84 x 10⁵ km / 3.0 x 10⁸ m/s = 2.5 seconds.
To learn more about light
https://brainly.com/question/104425
#SPJ4
Car A has a mass of 1000 kg and moves to the right along a level straight road at a speed of 6.0 m/s. It collides directly with car B which has a mass of 200 kg, in a completely inelastic collision. What is the speed of the car immediately after the collision?
a) 5.0m/s
b) 1.7 m/s
c) zero
d) 2.5 m/s
In an inelastic collision, the two objects stick together after the collision and move as one mass. Using the law of conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision.
The momentum before the collision can be calculated by multiplying the mass of Car A by its velocity:
1000 kg x 6.0 m/s = 6000 kg m/s
The momentum after the collision can be calculated by adding the masses of Car A and Car B together and multiplying by the final velocity:
(1000 kg + 200 kg) x v = 1200 kg v
Since the two momenta are equal, we can set them equal to each other:
6000 kg m/s = 1200 kg v
Solving for v, we get:
v = 5.0 m/s
Therefore, the speed of the two cars immediately after the collision is 5.0 m/s to the right. Since the two cars are now stuck together, their velocity is the same. The answer is not zero, as the question suggested in its multiple choice options.
TO KNOW MORE ABOUT inelastic collision CLICK THIS LINK
brainly.com/question/24616147
#SPJ11
