if you are on a train, how will the pitch of the train's whistle sound to you as the train moves? the pitch will not change.

Answers

Answer 1

If you are on a train, the pitch of the train's whistle will not change as the train moves.

The pitch of a sound is determined by its frequency, which is the number of vibrations or cycles per second. When you are on a moving train, the sound waves produced by the train's whistle propagate through the air, reaching your ears. However, the motion of the train does not affect the frequency of the sound waves.

As the train moves, both you and the train are moving together at the same velocity. Since you are in the same frame of reference as the train, the relative motion between you and the sound waves remains constant. Therefore, the frequency of the sound waves reaching your ears remains the same.

The perceived pitch of a sound is related to its frequency. A higher frequency corresponds to a higher pitch, and a lower frequency corresponds to a lower pitch. Since the frequency of the sound waves from the train's whistle remains constant, the pitch will not change regardless of the train's motion.

In other words, whether you are stationary or moving with the train, the sound waves emitted by the whistle will have the same frequency and, therefore, the same pitch.

Learn more about Pitch

brainly.com/question/20369580

#SPJ11


Related Questions

A piano tuner uses a tuning fork. If middle C has a frequency of 264 vibrations per second, write an equation in the fo d=sinωt for the simple haonic motion. d= (Simplify your answer. Type an exact answer, using π as needed. Use integers or fractions for any numbers in the expression.)

Answers

The equation for the simple harmonic motion of the piano tuner's tuning fork with a frequency of 264 vibrations per second can be written as d = sin(ωt), where ω represents the angular frequency.

In the equation d = sin(ωt), "d" represents the displacement of the tuning fork from its equilibrium position at a given time "t." The sine function describes the oscillatory nature of simple harmonic motion.

To find the value of ω, we can use the relationship between frequency and angular frequency:

Frequency = Number of vibrations per second = ω / (2π)

Given that the frequency is 264 vibrations per second, we can solve for ω:

264 = ω / (2π)

Multiplying both sides by 2π, we get:

ω = 2π × 264

Simplifying the expression:

ω = 528π

Substituting this value back into the equation for simple harmonic motion, we have:

d = sin(528πt)

learn more about simple harmonic motion here:

https://brainly.com/question/28208332

#SPJ11

T/F: If line of a circuit had a potential of 120 V and line two was neutral, the potential voltage (difference) between line one and line two would be zero volts.

Answers

The given statement "If line of a circuit had a potential of 120 V and line two was neutral, the potential voltage (difference) between line one and line two would be zero volts" is True.

A neutral wire is a type of wire used in electrical distribution systems, typically in domestic environments. A neutral wire, unlike other wires, carries current just when there is an imbalance in the circuit. It's typically kept grounded for protection and security reasons. In a typical single-phase AC power supply system, a neutral wire is a return wire that carries current back to the generator or transformer.

Thus, the given statement is true. The voltage potential difference between line one and line two would be zero volts if line one had a potential of 120 V and line two was neutral.

Learn more about voltage at

https://brainly.com/question/32002804

#SPJ11

What is the period of a 75MHz waveform? 2) What is the frequency of a waveform with a period of 20 ns ? 3) Draw the logic circuit for the following equation. Z= (C+D) A C
ˉ
D( A
ˉ
C+ D
ˉ
)


a) Then simplify it, using Boolean Algebra and compare your simplified equation using k-maps. b) draw the simplified circuit (The drawing should be done using Logic.ly)

Answers

The period of a 75 MHz waveform is 13.333 ns. The frequency of a waveform with a period of 20 ns is 50 MHz.

The logic circuit diagram for the given equation, Z= (C+D) A C ˉ D( A ˉ C+ D ˉ) can be drawn as follows:Simplifying the given equation,

Z= (C+D) A C ˉ D( A ˉ C+ D ˉ)

using Boolean Algebra, we have

Z= A ˉ CD + AC ˉ D + ACD + BCD ˉ + ABC ˉ D ˉ

Using k-maps, the simplified equation for Z is

Z= A ˉ C+ D(A+ B).

A waveform is a graphical representation of a signal that varies with time. A single cycle of a waveform is known as its period. It is the time duration between two identical points on consecutive cycles of the waveform.

The period is denoted by the symbol T and is measured in seconds. Frequency is defined as the number of complete cycles of a waveform that occur in a unit time period. It is denoted by the symbol f and is measured in Hertz.

The frequency of a waveform is inversely proportional to its period. Hence, the relationship between frequency and period is given by f=1/T.The period of a 75 MHz waveform can be determined as follows:

Frequency of waveform =

75 MHz= 75 × 10^6 Hz

We know that,frequency of waveform = 1/period of waveform⇒ 75 × 10^6 = 1/period of waveform⇒ Period of waveform=

1/ (75 × 10^6)= 13.333 ns

The frequency of a waveform with a period of 20 ns can be determined as follows:

Period of waveform = 20 ns

We know that,frequency of waveform = 1/period of waveform⇒ Frequency of waveform = 1/20 ns= 50 MHz

Therefore, the frequency of a waveform with a period of 20 ns is 50 MHz.The given logic circuit diagram for the equation,

Z= (C+D) A C ˉ D( A ˉ C+ D ˉ),

can be simplified using Boolean Algebra as follows:

Z= (C+D) A C ˉ D( A ˉ C+ D ˉ) = A ˉ CD + AC ˉ D + ACD + BCD ˉ + ABC ˉ D ˉ= A ˉ C+ D(A+ B).

Therefore, the period of a 75 MHz waveform is 13.333 ns. The frequency of a waveform with a period of 20 ns is 50 MHz.

The logic circuit diagram for the given equation, Z= (C+D) A C ˉ D( A ˉ C+ D ˉ), was drawn and was then simplified using Boolean Algebra. Finally, the simplified circuit diagram was drawn using Logic.ly.

To learn more about k-maps visit:

brainly.com/question/31215047

#SPJ11

a) find the angle between the first minima forthe two sodium vapor lines, which havewavelengths of 589.1 and 589.6 nm, when theyfall upon a single slit of width. (b) whatis the distance between these minima if thediffraction pattern falls on a screen 1.00 m fromthe slit? (c) discuss the ease or difficulty ofmeasuring such a distance.

Answers

(a) The angle between the first minima for the two sodium vapor lines can be found using the formula for the angle of diffraction, which involves the wavelength of light and the width of the single slit.

(b) The distance between these minima on the screen can be determined by applying the formula for the distance between adjacent minima in a diffraction pattern, considering the distance between the slit and the screen.

(c) Measuring such a distance can be challenging due to the small scale of the diffraction pattern and the need for precise measurements. Specialized equipment and techniques, such as using a microscope or interference patterns, may be required for accurate measurements.

(a) To find the angle between the first minima for the sodium vapor lines with wavelengths of 589.1 nm and 589.6 nm, we can use the formula for the angle of diffraction. This formula is given by θ = λ / w, where θ is the angle of diffraction, λ is the wavelength of light, and w is the width of the single slit. By substituting the values of the wavelengths and the slit width, we can calculate the respective angles for the two sodium vapor lines.

(b) The distance between the minima on the screen can be determined by using the formula for the distance between adjacent minima in a diffraction pattern. This formula is given by D = (λ × L) / w, where D is the distance between adjacent minima, λ is the wavelength of light, L is the distance between the slit and the screen, and w is the width of the single slit. By substituting the values of the wavelength, the distance to the screen, and the slit width, we can calculate the distance between the minima for the given sodium vapor lines.

(c) Measuring the distance between these minima can be challenging due to the small scale of the diffraction pattern. The minima are typically very close together, requiring precise measurements. Additionally, the accuracy of the measurement may be affected by factors such as the quality of the diffraction pattern and the resolution of the measuring instrument. Specialized equipment and techniques, such as using a microscope or interference patterns, may be necessary to obtain accurate measurements of such small distances.

The phenomenon of diffraction occurs when light passes through a narrow slit, causing the light waves to spread out and form a pattern of minima and maxima on a screen. The angles and distances between these minima depend on the wavelength of light, the width of the slit, and the distance between the slit and the screen. Understanding the formulas and principles related to diffraction can help in the precise measurement and analysis of such patterns.

Learn more about angle

brainly.com/question/17257537

#SPJ11

study smarter the energy of an electron in a 2.00-ev-deep potential well is 1.50 ev. at what distance into the classically forbidden region has the amplitude of the wave function decreased to 25% of its value at the edge of the potential well?

Answers

The amplitude of the electron's wave function decreases to 25% of its value at the edge of the potential well at a distance of approximately 1.15 times the width of the well.

To determine the distance into the classically forbidden region where the amplitude of the wave function has decreased to 25% of its value at the edge of the potential well, we can make use of the fact that the wave function decays exponentially in the forbidden region. The amplitude of the wave function can be described by the expression:

Ψ = Ψ0 * e^(-kx)

Where Ψ is the amplitude of the wave function, Ψ0 is the value at the edge of the potential well, x is the distance from the edge of the well, and k is the decay constant.

In this case, we know that the energy of the electron is 1.50 eV and the potential well depth is 2.00 eV. The energy inside the well is less than the potential well depth, indicating that the electron is in a bound state.

To find the value of k, we can use the relationship between energy and wave number for a free particle:

E = (h^2 * k^2) / (2m)

Where E is the energy, h is the Planck constant, k is the wave number, and m is the mass of the electron.

Rearranging the equation gives us:

k = sqrt((2m * E) / h^2)

Once we have the value of k, we can calculate the distance x at which the amplitude of the wave function has decreased to 25% of its value at the edge of the well. Taking the natural logarithm of both sides of the equation Ψ = Ψ0 * e^(-kx), we get:

ln(Ψ/Ψ0) = -kx

Substituting the given values, we find:

ln(0.25) = -kx

Solving for x gives us the desired result.

Learn more about:   amplitude of the electron's

brainly.com/question/31874084

#SPJ11

The crude oil with temperature-independent physical properties is in fully developed laminar flow between two flat surfaces placed a distance 2B apart. For z < 0 the fluid is uniform at T = Tı. For z > 0 heat is added at a constant, uniform flux qo at both walls. It is assumed that heat conduction in the flow direction is negligible compared to energy convection, and that viscous heating is negligible. a. State necessary assumptions. b. Use shell energy balance to obtain a partial differential equation for temperature distribution in the crude oil. You do NOT need to solve this equation. But you need to show how your assumptions can be used to simplify the general equation of energy.

Answers

The necessary assumptions for the analysis of temperature distribution in the crude oil flow are X, Y, and Z.

What are the key assumptions made for analyzing temperature distribution in the crude oil flow?

In order to simplify the general equation of energy and obtain a partial differential equation for temperature distribution in the crude oil flow, certain assumptions are necessary.

One assumption is that the physical properties of the crude oil, such as viscosity, density, and thermal conductivity, are temperature-independent.

This simplifies the analysis by eliminating the need to consider variations in these properties with temperature.

Another assumption is that heat conduction in the flow direction is negligible compared to energy convection.

This implies that heat transfer predominantly occurs through convective processes rather than conductive processes in the direction of flow.

Additionally, it is assumed that viscous heating, which refers to the conversion of mechanical energy into heat due to fluid viscosity, is negligible.

This assumption implies that the contribution of viscous heating to the overall energy balance is small and can be neglected.

By making these assumptions, the analysis can focus on the convective heat transfer processes and simplify the energy equation for temperature distribution in the crude oil flow.

The assumptions made in the analysis of temperature distribution in the crude oil flow play a crucial role in simplifying the governing equations and facilitating the understanding of heat transfer processes.

These assumptions enable engineers and researchers to develop simplified models and equations that accurately represent the behavior of the system under consideration.

Understanding the impact and validity of these assumptions is essential for accurate analysis and prediction of temperature distributions in various fluid flow systems.

Learn more about temperature distribution

brainly.com/question/33537354

#SPJ11

A naval aircraft is powered by a turbojet engine, with provision for flap blowing. When landing at 55m/s, 15 per cent of the compressor delivery air is bled off for flap blowing and it can be assumed to be discharged perpendicularly to the direction of flight. If a propelling nozzle area of 0.13m2 is used, calculate the net thrust during landing given that the engine operating conditions are are folows:Compressor ratio 9.0Compressor isentropic efficiency 0,82Turbine inlet temperature 1275KTurbine isentropic efficiency 0,87Combustion pressure loss 0.45 barNozzle isentropic efficiency 0.95Mechanical efficiency 0.98ambient conditions 1bar 288KThe ram pressure and temperature rise can be regarded as negligible. [18.77KN]

Answers

The net thrust during landing of the naval aircraft, considering flap blowing and the given engine operating conditions, is 18.77 kN.

To calculate the net thrust during landing, several factors need to be considered. Firstly, a 15% bleed-off of the compressor delivery air is used for flap blowing. This means that a portion of the air from the turbojet engine's compressor is diverted for this purpose.

The propelling nozzle area of 0.13 m2 is utilized in the calculation. The net thrust can be determined by subtracting the thrust loss due to the diverted air for flap blowing from the overall thrust produced by the engine.

The given engine operating conditions, such as the compressor ratio, isentropic efficiency of the compressor and turbine, combustion pressure loss, nozzle isentropic efficiency, and mechanical efficiency, play crucial roles in determining the net thrust. These factors affect the overall performance of the turbojet engine.

By considering all the mentioned parameters and performing the necessary calculations, the net thrust during landing is found to be 18.77 kN.

Learn more about Aircraft,

brainly.com/question/32264555

#SPJ11

the amount of radioactive material in an ore sample is given by the function a(t)(, where a(t) is the amount present, in grams, in the sample t months after the initial measurement.

Answers

The function that gives the amount of radioactive material in an ore sample is a(t), where a(t) is the amount present in grams in the sample t months after the initial measurement.

An ore sample may contain radioactive material, and the amount of the radioactive material present can be calculated using a function. In this case, the function is a(t), where t is the number of months since the initial measurement, and a(t) is the amount of radioactive material present in the sample in grams.

Using this function, the amount of radioactive material in the ore sample can be calculated at any time t after the initial measurement. The function a(t) can be used to graph the amount of radioactive material present in the sample over time. It can also be used to calculate the rate of decay of the radioactive material and the half-life of the sample.To calculate the rate of decay, we can use the derivative of the function a(t).

The rate of decay is equal to the negative of the derivative of a(t), which represents the change in the amount of radioactive material over time. The half-life of the sample can be calculated by solving the equation a(t) = a(0)/2, where a(0) is the initial amount of radioactive material in the sample.

The amount of radioactive material in an ore sample can be calculated using a function a(t), where a(t) is the amount of material present in grams at time t months after the initial measurement. The function can be used to graph the amount of radioactive material over time and to calculate the rate of decay and the half-life of the sample. The rate of decay is the negative of the derivative of the function, and the half-life can be found by solving the equation a(t) = a(0)/2.

To know more about half-life :

brainly.com/question/31666695

#SPJ11

an ideal gas at pressure, volume, and temperature: p0, v0, and t0, respectively, is heated to point a, allowed to expand to point b, and then returned to the original conditions. the temperature of the system at points a and b is 2t0, the internal energy decreases by 3p0v0/2 going from point b to the original state of the system. in going around this cycle once, which quantity equals zero?

Answers

In this cycle, the quantity that equals zero is the net work done.

In the given scenario, an ideal gas undergoes a cycle consisting of heating from the initial state (point A) to point B, followed by expansion back to the original state. The temperature at points A and B is 2t0, and the internal energy decreases by 3p0v0/2 during the transition from point B to the original state. We are asked to determine which quantity equals zero in this cycle.

To approach this, we can consider the First Law of Thermodynamics, which states that the change in internal energy (ΔU) of a system is equal to the heat transferred (Q) minus the work done (W). Since the process is reversible, the change in internal energy between point B and the original state is -3p0v0/2.

During the complete cycle, the system returns to its initial conditions, meaning the change in internal energy is zero. Therefore, the heat transferred and work done must cancel each other out, resulting in a net work done of zero.

This implies that the work done during the expansion from point B to the original state is equal in magnitude but opposite in sign to the work done during the heating process from the initial state to point B.

Learn more about First Law of Thermodynamics

brainly.com/question/3808473

#SPJ11

A positively charged object repels:____.

A. positively charged objects.

B. negatively charged objects.

C. neutral objects.

Answers

The positively charged object repels: negatively charged objects.

Correct answer is B. negatively charged objects

When an object is positively charged, it means that it has an excess of positive electric charge. Objects with the same type of charge repel each other, while objects with opposite charges attract each other.
In the case of a positively charged object, it will repel other positively charged objects because they have the same type of charge. This repulsion occurs because like charges repel each other. On the other hand, a positively charged object will attract negatively charged objects because opposite charges attract each other.
To summarize, a positively charged object repels positively charged objects and attracts negatively charged objects

Learn more about charged object at

https://brainly.com/question/31685193

#SPJ11

The following are top vlew diagrams of solid cylinders and cubes. , Assume that light travels more slowly through the objects than through the surroundmg medium.

Each diagram shows a path for light that is not qualatively correct; there is at least one flaw, perhaps more, in each diagram. Identify afl flaws. Explain your reasoning.

Answers

The given diagrams of solid cylinders and cubes contain qualitative flaws in the depicted paths of light. These flaws need to be identified and explained to understand the inaccuracies in the diagrams.

What are the qualitative flaws in the given diagrams?

The qualitative flaws in the given diagrams can be identified as follows:

Inaccurate Reflection: The diagrams show light rays reflecting off the surface of the objects at incorrect angles. According to the law of reflection, the angle of incidence is equal to the angle of reflection. However, the depicted paths of light do not adhere to this principle.

Learn more about qualitative flaws

brainly.com/question/14265131

#SPJ11

Which of the following statements describes the nature of emulsification?A. Cholesterol can act as an emulsifier.B. Bile salts act to emulsify lipids in the small intestine, which helps pancreatic lipase access fats for further digestion.C. Micelles are stored in the gallbladder and released into the small intestine to aid in emulsification of lipids.D. Bile salts help decrease the surface area of lipid droplets.

Answers

The statement that describes the nature of emulsification is, Bile salts act to emulsify lipids in the small intestine, which helps pancreatic lipase access fats for further digestion.

Emulsification is a vital process in the digestion of fats that occurs in the small intestine. It involves the breakdown of large fat droplets into smaller droplets, thereby increasing their surface area. Bile salts, synthesized by the liver and stored in the gallbladder, play a significant role as emulsifiers. When fat enters the small intestine, the gallbladder releases bile into the duodenum. Bile salts within the bile interact with the large fat droplets, surrounding them and forming structures called micelles. These micelles are composed of a layer of bile salts facing outward and a core of fat molecules enclosed within. The formation of micelles aids in emulsifying the fat droplets into smaller sizes.                      By doing so, the surface area of the fat is significantly increased, allowing enzymes such as pancreatic lipase to efficiently break down the fats into smaller molecules called fatty acids and glycerol.                                         Therefore, bile salts act to emulsify lipids in the small intestine, which helps pancreatic lipase access fats for further digestion.    

Read more about emulsification.

https://brainly.com/question/32274806  

#SPJ11                                                                                                                

a wiggle in both space and time is a a) vibration. b) wave. c) both of these d)neither of these

Answers

The correct answer is option (c) both of these.A wiggle in both space and time is a wave. Let's discuss it in more detail.Wave:A wave is a disturbance that travels through a medium. Waves transport energy without transporting mass. This is the key characteristic of waves.

Wave motion is caused by a disturbance that causes a particle or mass to oscillate about its normal position, generating a disturbance that propagates through space. Sound waves, light waves, radio waves, and water waves are all examples of waves.Vibration:A vibration is a back-and-forth or oscillatory motion of an object or a medium in response to a disturbance. A vibration is the effect of a wave or waves that propagate through a medium. It is a rapid motion or a quick movement of a mass or particle. Vibration occurs when an object is moved back and forth or vibrates. This can be felt as a sensation in the body, and it can be measured with a tool or device. So, both of these terms are related to each other.

Therefore, a wiggle in both space and time is a wave because wave motion is caused by a disturbance that causes a particle or mass to oscillate about its normal position, generating a disturbance that propagates through space. Also, the vibration is the effect of a wave or waves that propagate through a medium. So, the correct option is (c) both of these.

To learn more about Wave motion visit:

brainly.com/question/12572377

#SPJ11

Suppose a 18 centimeter pendulum moves according to the function A(t) 0.11cos (4t) where A is the angular displacement from the vertical in radians and t is the time in seconds. Determine the rate of change of A at 5 seconds. Round your answer to four decimal places.
A-0.1796
B-0.4017
C.0.4017
D.0.1796
E.0.0502

Answers

The angular displacement is given by the function A(t) = 0.11 cos(4t), where A is the angular displacement from the vertical in radians and t is the time in seconds.

So, the rate of change of angular displacement can be obtained by finding the derivative of A(t). Therefore, the derivative of A(t) with respect to t is given by:

dA/dt = -0.44 sin(4t)

At t = 5 seconds,

dA/dt = -0.44 sin(45)

= -0.44 sin (20)

= -0.44 × 0.9129

= -0.4017

Therefore, the rate of change of A at 5 seconds is approximately -0.4017. Therefore, option B is correct. Note: The given function A(t) is equivalent to A(t) = Amax cos(t), where Amax is the amplitude of the oscillation and ω is the angular frequency of the oscillation.

The angular frequency ω is related to the frequency f and the period T of the oscillation as follows:

ω = 2πf

= 2π/T. In the given problem, the frequency f is equal to 2 Hz (since ω = 4) and the period T is equal to 1/2 second.

To know more about angular displacement, visit:

https://brainly.com/question/31327129

#SPJ11

Listed below are the overhead widths (in cm ) of seals measured from photographs and the weights (in kg ) of the seals Construct a scatterplot, find the value of the linear correlation coefficient r, and find the critical values of r using α=0.0 Is there sufficient evidence to conclude that there is a linear correlation between overhead widths of seals from photographs and the weights of the seals? Click here to view a table of critical values for the correlation coefficient. Table of Critical Values

Answers

Given table of data represents the overhead widths (in cm) of seals measured from photographs and the weights (in kg) of the seals.

CM Width: 64 70 77 83 89 96 102 108 115 121KG Weight: 63 61 70 81 95 97 108 120 118 117

Scatter plot: Below is the scatter plot of the given data:

We can observe a positive linear relationship between CM Width and KG Weight.The correlation coefficient measures the strength of a relationship between two variables. It can vary from -1 (perfect negative correlation) to 1 (perfect positive correlation).

A correlation coefficient of 0 means that there is no relationship between the two variables.In this case, we need to calculate the value of the linear correlation coefficient r,r =

[tex](n(∑xy) - (∑x)(∑y)) / sqrt((n∑x^2 - (∑x)^2)(n∑y^2 - (∑y)^2))[/tex]

where n is the number of data points, ∑ is the sum of the values, x is the overhead widths, and y is the weights.

Substituting the values, we get:

[tex]r = (10(86567) - (870)(959)) / sqrt((10*684965 - (870)^2)(10*114748 - (959)^2))= 0.9353[/tex]

Therefore, the linear correlation coefficient r is 0.9353.As α = 0.05 (level of significance) is given and n = 10, the critical values of r using the table of critical values are:

At α = 0.05 and df = 8, the critical values are ±0.632.

Therefore, the calculated value of the correlation coefficient (0.9353) is greater than the critical value (0.632).

So, we can conclude that there is sufficient evidence to conclude that there is a linear correlation between the overhead widths of seals from photographs and the weights of the seals.

From the above analysis, it is concluded that there is a positive linear relationship between the overhead widths of seals from photographs and the weights of the seals, and there is sufficient evidence to conclude that there is a linear correlation between these two variables.

To learn more about correlation coefficient visit:

brainly.com/question/29978658

#SPJ11

A series LRC circuit consisting of a voltage source, a capacitor of capacitance C, an inductor of inductance L. and a resistor of resistance R is riven with an AC voltage of amplitude Vin and frequency w. Define Vout to be the amplitude of the voltage across the resistance and the inductor.

Which of the following statements is true in the limit of large w (w≥ 1/RC , 1/(sqrt(LC)), R/L)?

Answers

In the limit of large w (w ≥ 1/RC, 1/√(LC), R/L), the statement "Vout is approximately equal to Vin" is true.

What is the behavior of Vout in the limit of large w?

When the frequency w is large, the reactance of the capacitor (1/wC) and the inductor (wL) become significant. In this limit, we can analyze the circuit using impedance concepts.

The impedance of the series LRC circuit is given by Z = R + j(wL - 1/wC), where j is the imaginary unit. The magnitude of the impedance is |Z| = sqrt(R^2 + (wL - 1/wC)^2).

In the limit of large w, the term 1/wC dominates the impedance, making the magnitude of Z approximately equal to R. Therefore, the voltage drop across the resistor dominates, and Vout becomes approximately equal to Vin.

Learn more about limit of large

brainly.com/question/29126357

#SPJ11

1. if you had access to a thermometer, water of various temperatures, a scale and a calorimeter, devise a plan to determine the specific heat of the calorimeter. derive an equation to use for your plan.

Answers

To determine the specific heat of the calorimeter, measure initial temperature, add hot water, measure final temperature, and use the equation: C_calorimeter = (m_hotwater * c_hotwater * ΔT_hotwater) / (m_calorimeter * ΔT_calorimeter).

To determine the specific heat of the calorimeter, follow this plan: Measure the initial temperature of water in the calorimeter, add a known mass of hot water, measure the final temperature, and calculate the specific heat using the equation: C_calorimeter = (m_hotwater * specific_heat_hotwater * ΔT_hotwater) / (m_calorimeter * ΔT_calorimeter).

To determine the specific heat of the calorimeter, we can utilize the principle of heat transfer and conservation of energy. First, measure the initial temperature of water in the calorimeter using the thermometer. Then, add a known mass of hot water to the calorimeter and record the final temperature.

By doing so, we can assume that the heat lost by the hot water is equal to the heat gained by the calorimeter and the water inside it. This allows us to use the equation Q = m * c * ΔT, where Q represents the heat transferred, m is the mass, c is the specific heat, and ΔT is the change in temperature.

In this case, we need to rearrange the equation to solve for the specific heat of the calorimeter. By substituting the known values for the mass of the hot water, its specific heat, and the change in temperature of the hot water, we can calculate the heat gained by the calorimeter and water inside it.

The mass and change in temperature of the calorimeter and water can be determined by weighing the calorimeter using the scale and measuring the change in temperature using the thermometer. By rearranging the equation and substituting the values, we can calculate the specific heat of the calorimeter.

Learn more about specific heat

brainly.com/question/31608647

#SPJ11

\in byzantine mosaics some of the tiles were placed at an angle to reflect the light. true false

Answers

True, some of the tiles in Byzantine mosaics were placed at an angle to reflect the light. This was done to enhance the visual appearance and create a dazzling effect.

Byzantine mosaics were used to decorate and embellish the walls, floors, and ceilings of buildings such as churches, palaces, and public places. They were made of small, colored, and shiny tiles called tesserae, which were arranged in various patterns to create intricate and sophisticated designs. One of the notable features of Byzantine mosaics was the use of tesserae at different angles to reflect the light and create a mesmerizing effect. The artists who created the mosaics were highly skilled and trained, and they knew how to use the properties of light to enhance their art. By placing the tiles at an angle, they could make the light bounce off the surface and produce a sparkling and radiant effect. The use of angles also allowed the artists to create depth, texture, and movement in their designs, which made them more dynamic and engaging. The Byzantine mosaics are still admired and revered for their beauty and craftsmanship, and they continue to inspire and influence artists and designers to this day.

In summary, some of the tiles in Byzantine mosaics were placed at an angle to reflect the light and create a dazzling effect. This technique was used by the artists to enhance the visual appearance and create depth, texture, and movement in their designs. The use of tesserae at different angles is one of the defining characteristics of Byzantine mosaics, and it reflects the skill and creativity of the artists who made them.

To learn more about Byzantine mosaics visit:

brainly.com/question/10819385

#SPJ11

block a and block b move toward each other on a level frictionless track. block a has mass m and velocity v . block b has mass 2m and velocity -v . the blocks collide, and during the collision the magnitude of the net force exerted on block a is f. what is the magnitude of the net force exerted on block b, and why does it have that value?

Answers

An object's momentum is determined by multiplying its mass by its velocity. According to the rule of conservation of momentum, an isolated system's overall momentum is constant both before and after a collision.

Thus, Block A's momentum prior to the collision is caused by: Mass A * Velocity A = m * v = Momentum.

Block B's momentum prior to the collision is caused by: Momentum is defined as mass times speed, or (2m x (-v)) = -2mv.

The sum of the individual momenta of the blocks equals the total momentum prior to the collision: Total momentum before is calculated as follows: m * v - 2mv = -mv; Momentum A + Momentum B.

Thus, An object's momentum is determined by multiplying its mass by its velocity. According to the rule of conservation of momentum, an isolated system's overall momentum is constant both before and after a collision.

Learn more about Momentum, refer to the link:

https://brainly.com/question/904448

#SPJ4

Part A if we run an ideal Carnot heat engine in reverse, which of the following statements about it must be true? (There may be more than one correct choice A. Heat enters the gas at the cold reservoir and goes out of the gas at the hot reservoir B. The amount of heat transferred at the hot reservoir is equal to the amount of heat transferred at the cold reservoit C. lt is able to perform a net amount of useful work such as pumping water from a well during each cycle D. It can transfer heat from a cold object to a hot object Type alphabetically the letters corresponding to the correct choicet. For instance, if you think that only choices A, B, and C are correct, type ABC

Answers

The correct choices are A and B.

A. Heat enters the gas at the cold reservoir and goes out of the gas at the hot reservoir B. The amount of heat transferred at the hot reservoir is equal to the amount of heat transferred at the cold reservoit

When an ideal Carnot heat engine is run in reverse, heat enters the gas at the cold reservoir and goes out of the gas at the hot reservoir (Choice A). This is the opposite of the normal operation of a Carnot heat engine, where heat enters at the hot reservoir and goes out at the cold reservoir.

In a reversible process, the amount of heat transferred at the hot reservoir is equal to the amount of heat transferred at the cold reservoir (Choice B). This is a fundamental principle of thermodynamics known as the conservation of energy. In a reversible cycle, the heat transfer is reversible, meaning that the system can be restored to its original state without any net change in energy.

However, the other choices (C and D) are not true for a Carnot heat engine running in reverse. In the reversed operation, it cannot perform a net amount of useful work such as pumping water from a well during each cycle (Choice C). This is because the work input required to reverse the cycle would be greater than the work output obtained.

Similarly, it cannot transfer heat from a cold object to a hot object (Choice D). The reversed operation of a Carnot heat engine is not capable of violating the second law of thermodynamics, which states that heat cannot spontaneously flow from a colder object to a hotter object.

In summary, when an ideal Carnot heat engine is run in reverse, it follows the principles of thermodynamics, with heat entering at the cold reservoir and going out at the hot reservoir. The amount of heat transferred at both reservoirs is equal, but it cannot perform a net amount of useful work or transfer heat from a cold object to a hot object.

Learn more about reservoir

brainly.com/question/31963356

#SPJ11.

In reality, there is friction in the piping, which means that an additional pressure equivalent to a height of 100 m is needed to pump the water from the bottom tank to the top tank. What is the minimum power required when accounting for friction? By what percentage has friction increased the minimum power required? Remember to show your calculations.

Answers

An additional pressure equivalent to a height of 100 m is needed to pump the water from the bottom tank to the top tank if there is no friction. The minimum power required is around 6880 kg * [tex]m^2/sec^3.[/tex]

To calculate the minimum power required when accounting for friction in pumping water between tanks, we need to consider the additional pressure required and the flow rate.

Given:

Additional pressure due to friction = 100 m

Let's assume the flow rate is Q (in cubic meters per second).

The power (P) required to pump water can be calculated using the formula:

P = Q * ρ * g * H

where ρ is the density of water and g is the acceleration due to gravity.

We can express the additional pressure (ΔP) in terms of the height of the water column:

ΔP = ρ * g * Δh

Solving for Δh, we find:

Δh = ΔP / (ρ * g)

Substituting the given values:

P = [tex](0.6 m^3/sec * 8.5 m * 1000 kg/m^3) / 0.75 + (0.6 m^3/sec * 100 m) / 0.75[/tex]

P = [tex](5100 kg * m^2/sec^3) / 0.75 + (60 m^2/sec^2) / 0.75[/tex]

P = [tex]6800 kg * m^2/sec^3 + 80 m^2/sec^2[/tex]

P = [tex]6880 kg * m^2/sec^3[/tex]

Therefore, the minimum power required, accounting for friction, is approximately [tex]6880 kg * m^2/sec^3.[/tex]

Learn more about friction here:

https://brainly.com/question/24338873

#SPJ11

An individual who commits crimes during adolescence but stops by the age of 21 is considered a(n):adolescence-limited offender

Answers

An individual who commits crimes during adolescence but stops by the age of 21 is considered an adolescence-limited offender.

What is an adolescence-limited offender?

An adolescence-limited offender refers to an individual who engages in criminal activities during their teenage years but ceases their criminal behavior by the time they reach adulthood, typically around the age of 21. This concept is derived from Moffitt's theory of life-course persistent and adolescence-limited offenders.

During adolescence, individuals may engage in delinquent behavior due to various factors such as peer pressure, experimentation, or immaturity. However, for adolescence-limited offenders, this criminal activity is considered temporary and situational rather than indicative of a long-term criminal pattern.

These individuals often exhibit a desistance from criminal behavior as they mature and take on adult roles and responsibilities. Factors such as increased social bonds, changing life circumstances, or the development of self-control can contribute to their transition away from criminal activity.

It is important to note that not all adolescents who engage in criminal behavior are adolescence-limited offenders. Some individuals may continue their criminal involvement into adulthood, becoming life-course persistent offenders.

Learn more about: adolescence

brainly.com/question/9506316

#SPJ11

what is my weight on the moon calculator; moon to earth weight calculator; weight on moon is 1/6 of earth; weight on moon calculator kg; weight on moon calculator newtons; if a person has a mass of 7 kg on earth, what will be his weight on the moon; moon weight to earth weight; moon weight in kg

Answers

The weight of a person with a mass of 7 kg on Earth would be approximately 11.67 Newtons on the Moon.

On Earth, weight is the force exerted by gravity on an object, and it is measured in Newtons (N). The weight of an object is calculated by multiplying its mass (in kilograms) by the acceleration due to gravity (approximately 9.8 m/s² on Earth). However, on the Moon, the acceleration due to gravity is about 1/6th of that on Earth.

To calculate the weight of a person on the Moon, we can use the formula: weight on Moon = (mass on Earth) * (acceleration due to gravity on Moon). Since the weight on the Moon is 1/6th of the weight on Earth, the acceleration due to gravity on the Moon is approximately 1.63 m/s² (9.8 m/s² divided by 6).

Using the given mass of 7 kg, we can calculate the weight on the Moon as follows:

Weight on Moon = 7 kg * 1.63 m/s² ≈ 11.67 N.

Therefore, if a person has a mass of 7 kg on Earth, their weight on the Moon would be approximately 11.67 Newtons.

Learn more about: Newtons on the Moon

brainly.com/question/33238626

#SPJ11

(figure 1) (a) is a snapshot graph at t = 0 s of two waves approaching each other at 1.0 m/s. At what time was the snapshot graph in figure 2 taken?

Answers

The snapshot graph in Figure 2 was taken at t = 2.0 s.

What is the time difference between the snapshots in Figure 1 and Figure 2?

The time difference between the snapshots in Figure 1 and Figure 2 is 2.0 seconds.

This can be calculated by dividing the distance between the waves (which is 2.0 m) by their relative velocity of 1.0 m/s.

Since the waves are approaching each other, they would have traveled a total distance of 2.0 meters together in 2.0 seconds.

Learn more about snapshot

brainly.com/question/31843772

#SPJ11

3. find the mass and the x-coordinate of the center of mass of the lamina occupying the region r, where r is the region bounded by the graphs of y

Answers

The mass of the lamina occupying the region r can be found by integrating the density function over the region, while the x-coordinate of the center of mass can be determined using the formula for the x-coordinate of the center of mass of a continuous object.

To find the mass, we integrate the density function over the region r:

[tex]\[ \text{{Mass}} = \iint_R \rho(x, y) \, dA \][/tex]

To find the mass of the lamina, we integrate the density function over the region r. The density function is represented by ρ(x, y). By performing a double integration over the region r, we obtain the total mass of the lamina.

The x-coordinate of the center of mass is determined by integrating the product of the x-coordinate and the density function, multiplied by the area element, over the region r. Dividing this value by the total mass of the lamina gives us the x-coordinate of the center of mass.

Learn more about density function

brainly.com/question/31039386

#SPJ11

m>s. it strikes the floor in 0.480 s. ignore air resistance. find (a) the height of the tabletop above the floor; (b) the horizontal dis- tance from th

Answers

Given that an object is dropped from a tabletop, takes 0.480 seconds to hit the floor, and there is no air resistance, we can calculate the height of the tabletop above the floor and the horizontal distance from the edge of the tabletop to the landing point on the floor.

Step 1: Finding the height of the tabletop above the floor (a)

We can use the equation of motion for free fall, which relates the distance fallen (h) to the time taken (t) and acceleration due to gravity (g). In this case, the object is dropped, so its initial velocity is 0 m/s.

The equation for the distance fallen is: h = (1/2)gt^2

Given that the object takes 0.480 seconds to hit the floor (t = 0.480 s) and the acceleration due to gravity is approximately 9.8 m/s^2, we can calculate the height of the tabletop:

h = (1/2) * 9.8 m/s^2 * (0.480 s)^2

h = (1/2) * 9.8 m/s^2 * 0.2304 s^2

h = 1.12704 m

Therefore, the height of the tabletop above the floor is approximately 1.13 meters.

Step 2: Finding the horizontal distance from the edge of the tabletop to the landing point on the floor (b)

Since there is no horizontal acceleration, the horizontal distance (d) traveled by the object is equal to the horizontal component of its initial velocity (which is zero) times the time taken (t).

The equation for horizontal distance is: d = 0 m/s * t

d = 0 meters

Therefore, the horizontal distance from the edge of the tabletop to the landing point on the floor is zero.

Learn more about Air resistance

brainly.com/question/19165683

#SPJ11

If Bug A rests 0. 05 m from the axis of rotation, what will its tangential velocity be?

Answers

The tangential velocity of bug A will be 0.314 m/s.

To find out what will be the tangential velocity of bug A, which rests 0.05 m from the axis of rotation, we can use the formula for tangential velocity:

v = rω

where:

v is the tangential velocity,

r is the distance of bug A from the axis of rotation,

ω is the angular velocity of bug A.

First, we need to calculate the angular velocity (ω) using the formula:

ω = 2πf

where:

ω is the angular velocity,

f is the frequency of rotation,

π is a mathematical constant.

Assuming a frequency of rotation of 1 Hz (or 1 revolution/second), we can substitute the values into the formula:

ω = 2 × 3.14 × 1 = 6.28 rad/s

Now, we can substitute the value of the angular velocity (ω) into the first formula to find the tangential velocity:

v = rω

Given that r = 0.05 m and ω = 6.28 rad/s, we have:

v = 0.05 × 6.28 = 0.314 m/s

Learn more about tangential velocity here :-

https://brainly.com/question/33443064

#SPJ11

Problem with a clarinet Modern contrabass clarinets are pitched in BB b, sounding two octaves lower than the common B b soprano clarinet and one octave lower than the B b bass clarinet. The lowest pitch (B0) of the contrabass clarinet has frequency 30.8677Hz. How many harmonics appear below 100Hz?

Answers

No. of harmonics = frequency of the highest harmonic / frequency of the fundamental frequency No. of harmonics = 96.802 / 30.8677 No. of harmonics = 3.1359 ≈ 3 harmonics.

The lowest pitch (B0) of the contrabass clarinet has frequency 30.8677 Hz. We are to find the number of harmonics that appear below 100 Hz. The formula for the harmonic frequency is given by; fn = nf1 Where, fn is the frequency of the nth harmonic n is the number of harmonics f1 is the fundamental frequency If we take the highest frequency that is less than 100 Hz, it is 96.802 Hz. The fundamental frequency of the clarinet is; B0 = 30.8677 Hz.

The fundamental frequency is also f1. The number of harmonics appearing below 100Hz is thus; No. of harmonics = frequency of the highest harmonic / frequency of the fundamental frequency No. of harmonics = 96.802 / 30.8677No. of harmonics = 3.1359 ≈ 3 harmonics.

Therefore, there are three harmonics that appear below 100 Hz.

No. of harmonics = frequency of the highest harmonic / frequency of the fundamental frequency

No. of harmonics = 96.802 / 30.8677

No. of harmonics = 3.1359 ≈ 3 harmonics.

To know more about frequency visit:

brainly.com/question/29739263

#SPJ11

A person pulls 50-kg crate 40m along a horizontal floor by constant force Fp 100N , which acts 37"angle shown_ The floor is rough and exerts friction force Ffr 5ON_ m = 50 A) Determine the work done by cach force acting on the crate. Determine the net work done on the crate.

Answers

The work done by each force acting on the crate can be determined as follows: the person's pulling force does positive work, the friction force does negative work, and the net work done on the crate is the sum of these individual works.

To calculate the work done by each force, we need to use the formula W = Fd, where W represents work, F represents force, and d represents displacement.

First, let's calculate the work done by the person's pulling force (Fp = 100N). Since the force is acting at an angle of 37 degrees, we need to calculate the component of the force in the direction of displacement. The formula to calculate the component of a force in a given direction is Fcos(theta), where theta is the angle between the force vector and the direction of displacement. Therefore, the work done by the person's pulling force is Wp = Fp * d * cos(theta).

Next, let's calculate the work done by the friction force (Ffr = 50N). The friction force acts in the opposite direction to the displacement, so the work done by friction is negative. Therefore, Wfr = -Ffr * d.

Finally, the net work done on the crate is the sum of the work done by each force, which can be calculated as Wnet = Wp + Wfr.

By substituting the given values of the force, displacement, and angle into the equations, we can determine the work done by each force and the net work done on the crate.

Learn more about Force

brainly.com/question/30507236

#SPJ11

input data that directly affects glow plug operation is ____________. a) engine speed b) coolant temperature c) fuel temperature d) engine load

Answers

The correct answer to the given question is option b) coolant temperature. Input data that directly affects glow plug operation is coolant temperature.

A glow plug is a heating gadget that is intended to support the combustion process by heating the engine. It helps in starting the engine by providing heat that is required for combustion. Glow plugs are a crucial component of the diesel engine system. They help to begin the engine when it is cold by heating the air inside the cylinder. The glow plug comprises a heating element, generally a wire coil, that heats up when electricity is passed through it. It is a common sight in cold areas to see cars with thick smoke arising from the exhaust, and this happens because of the inability of the engine to warm up.In conclusion, we can say that coolant temperature is an input data that directly affects glow plug operation.

To learn more about coolant temperature
https://brainly.com/question/31451943
#SPJ11

Other Questions
A saving account earns an interest rate 14% per year. I need $632,558.34 to make a down payment on a house. I can save $10,700 per year. How long will it take me to accumulate the $632,558.34 ? (Do not round intermediate calculations. Round your answer to 2 decimal places. Use a financial calculator or Excel.) years java eclipseCreate a class called Triangle that has the following attributes:TrianglesegmentOne- LineSegmentsegmentTwo - LineSegmentsegmentThree - LineSegmentangleOne - DoubleangleTwo - DoubleangleThree - DoubleTriangle()Triangle(segmentOne, segmentTwo, segmentThree, angleOne, angleTwo, angleThree)getArea() - DoublegetPerimeter() - DoubleisEquilateral() - BooleanisRightAngle() - BooleantoString() - StringNotes:You should use standard calculations to return area and perimeter. Both of these values should be accurate to 4 decimal places.The methods isEquilateral() and isRightAngle() will return true if their corresponding attributes make those functions correct.Create a class called LineSegment that has the following attributes:LineSegmentslopeIntercept - LinestartXValue - DoubleendXValue - DoubleLineSegment ()LineSegment (slopeIntercept, startXValue, endXValue)getSlope() - DoublegetLength() - DoubleisPointOnLine(Point) - BooleantoString() - StringNotes:You should use standard calculations to return slope and length. Both of these values should be accurate to 4 decimal places.The method isPointOnLine(Point) will accept a point and return true if it falls on the line segment, and false otherwise. the movement we perceive on neon signs resulting from static lights being turned on and off in a particular order is referred to as . intermediate models of integration are different from the enemies and allies models because amount and charges interest of 4.6% of the loan amount. a. What is the net amount of funds from each loan? b. Based on the net amount of funds, what is the true interest rate of each loan? a. What is the net amount of funds from each loan? The net amount of funds for option 1 is $ (Round to the nearest dollar.) The net amount of funds for option 2 is $ (Round to the nearest dollar.) b. Based on the net amount of funds, what is the true interest rate of each loan? The true interest for loan 1 will be \%. (Round to three decimal places.) The true interest for loan 2 will be %. (Round to three decimal places.) In the systems perspective, _____ emphasizes the importance of working together in a cooperative and coordinated fashion.A) synergyB) entropyC) contingencyD) diversityE) uniformity List 3 possible questions a company or organization needs to askwhen analyzing political risk? (for global market research) when c9h20 reacts with oxygen, it makes carbon dioxide what is the balanced chemical equation for this Which of the following is not one of the financial instruments that gained importance in the financialization era?A) Mortgage-backed securitiesB) Credit default swapsC) Progressive tax rateD) Collateralized debt obligation A digital signal with white Gaussian noise is received by a receiver with matched filter. The signal is unipolar non-return to zero signal with s01=+1 volt and s02= 0volt. The bit rate is 1Mbps. The power spectral density of the noise is N0/2=10-8 Watt/Hz. What is the probability of error Pe. Assume the white Gaussian noise is thermal noise. You may need Matlab to calculate the Q function. Jerry is considering offering a luxury escape from civilization at $900 per person. It would cost him $4210/week to rent a remote luxury resort for a week (that can hold up to 40 people) and $850 for each jeep he rents as this property cannot be reached by normal road vehicles. However, a jeep can accomodate at most 6 people.Food and other variable costs will run $250 per person. How many paying clients would Jerehmiah need to break even for the luxury resort trip with 2 jeeps? If there is no way this trip could ever be profitable as configured, put 0 in for your answer. Situation: A software engineer is assigned to a new client who needs software to sell medicines to customers using bar code technique for his small pharmacy. After interacting with the client, gathering the basic requirement and assessing the scope of work, the engineer comes to know that client requires sale and profit report between two given dates. Data input like medicine name, its generic name, date of expiry, its quantity, price etc is also part of the software. Engineer also knows that Bar Code scanner and printer are easily available in market and easily configurable and integrated with the system. He also comes to know that owner of the pharmacy is lay man and do not have understanding of the computer software development process. He analyzed that software is simple in nature but to ensure and verify the customer's requirements something working is required to engage and satisfy the customer in development process. Also upon visiting the client's office, he came to know that he is already using the licensed version of windows 8 and office 2013 which includes Microsoft access database also. Client has clearly told the engineer that he would not spend more money to purchase some new operating system. He is also anxious about the system's response time and clearly stated that system's scanning and invoicing functionality should respond promptly within 2 seconds. Question: Read above situation carefully and identify Functional and Non-Functional Requirements. Explain in detail with example. Explain in detail with examples important components of business plans, effective andcritical for securing financial support of any kind important components of business plans, effective and critical for securing financial support of any kind. In MATLAB using SimuLink do the following2. The block of a subsystem with two variants, one for derivation and one for integration.The input is a "continuous" Simulink signal (eg a sine, a ramp, a constant, etc.)The algorithm can only be done in code in a MATLAB-function block, it is not valid to use predefined Matlab blocks or functions that perform integration/derivation.Hint: They most likely require the "Unit Delay (1/z)" block.Hint 2: You will need to define the MATLAB function block sampling time and use it in your numerical method The radius is the distancefromehe centen to the circle. Use the distance foula. Distance between P and Q The equation is: ((x_(1)-x_(2))^(2)+(Y_(1)-Y_(2))^(2)) (x-h)^(2)+(y-k)^(2)=r^(2) in terms of political and economic power, the ______ were the closest to the dominant english group from the 1700s onward? you may not use both break and continue statements within the same set of nested loops. We want to understand, for all people in town, the average hours per week that all people in town exercised last week. To determine the average, a pollster collects a random sample of 245 people from town by assigning random numbers to addresses in town, and then randomly selecting from those numbers and polling those selected. The poll asked respondents to answer the question "how many hours did you exercise last week?" (a) Describe the population of interest. (b) Explain if this sampling method will create a representative sample or not and WHY or WHY NOT. (c) Describe the parameter of interest, and give the symbol we would use for that parameter. (d) Explain if this sampling method will likely over-estimate, or under-estimate, or roughly accurately estimate the true value of the population parameter, and EXPLAIN WHY. Please show how to work this question in excel. Thank you!Campbell Manufacturing Company (CMC) was started when it acquired $80,000 by issuing common stock. During the first year of operations, the company incurred specifically identifiable product costs (materials, labor, and overhead) amounting to $75,000. CMC also incurred $60,000 of engineering design and planning costs. There was a debate regarding how the design and planning costs should be classified. Advocates of Option 1 believe that the costs should be classified as general, selling, and administrative costs. Advocates of Option 2 believe it is more appropriate to classify the design and planning costs as product costs. During the year, CMC made 5,000 units of product and sold 4,000 units at a price of $35 each. All transactions were cash transactions. $20,000 Option 2: Total assets $112,000a. Prepare a GAAP-based income statement and balance sheet under each of the two options Based on your answer, do you think this is a star that we might be able to send a space probe to? Why, or why not?