If you start with 8.95 g of crude sulfanilamide and recrystallize it from ethanol to recover 7.20 g of pure sulfanilamide, what is the percent recovery

Answer:

potassium chloride (KCl)

Explanation:

The reaction between aqueous potassium hydroxide and aqueous iron (III) hydroxide is a double replacement reaction.

3 KOH + FeCl₃ → 3 KCl + Fe(OH)₃

Hope that helps.

Answer:

The correct answer is

[tex]Fe(OH)_{3}[/tex]

Explanation: I tried the KCI and it was incorrect but it showed the answer so here you go!

Answer:

Explanation:

In an aqueous solution of potassium sulfate (K₂SO₄), the solute is K₂SO₄ and the solvent is water. The percentage by mass describes the grams of solute there are dissolved per 100 grams of solution. It can be calculated as:

mass percentage = (mass of solute/total mass of solution) x 100%

For example, in an aqueous solution which is 2% by mass of K₂SO₄, there are 2 grams of K₂SO₄ per 100 g of solution.

Answer:

In this Lewis equation it can be seen how oxygen and hydrogen have a dative union, that is, there is a proton that is temporarily "borrowed"

Explanation:

This molecule is the same as water but with one more hydrogen, that is why the general charge of the molecule is positive

Answer:

the anser is c

Explanation:

Terri and Ernesto should both use geographic maps.

may i have brainliest? :D

Answer:

C.

Explanation:

I dunno. took the test and got it right.

Answer:

85 ml

Explanation:

move the decimal place over two times

Answer:

Explanation:

The Electronic Configuration of the elements is the arrangement of all electrons of an element in energy levels and sub-levels (orbitals).  

There are 7 energy levels, numbered from 1 to 7, and in which electrons are distributed, logically in order according to their energy level. Electrons with less energy will be spinning at level 1. Each level is divided into sub-levels. These sub-levels into which each level is divided can be up to 4. These 4 sub-levels are called: s, p, d, f. In the sub-level s there can only be a maximum of 2 electrons, in p there can be a maximum of 6 electrons, in the sub-level d 10 electrons and finally in the sub-level f there can be a maximum of 14 electrons.

In other words, the difference between the sub-levels consists of the number of electrons that it can hold at each level. In each sublevel there are a certain number of orbitals [1 orbital describes the rotation of a maximum of two electrons around the nucleus] that can contain a maximum of 2 electrons each. In this way, the maximum number of electrons that each sublevel admits is: 2 in the s; 6 in the p (2 electrons x 3 orbitals); 10 in the d (2 electrons x 5 orbitals); 14 in the f (2 electrons x 7 orbitals).

Answer:

D= 109.5 degrees, 109.5 degrees, 120 degrees

Explanation:

The bond angle observed for any bond between two chemical species depends on the hybridization of the atoms.

However, for organic compounds, single bonds normally involve sp3 hybridized atoms with a bond angle of 109.5 degrees such as in the positions marked a and b.

However, a double bond is made of atoms in sp2 hybridized state with a bond angle of 120 degrees such as in c.

Answer:

1. your back

2. false

3. agility

4. hand eye coordination

Explanation:

hope this helps <3

When NH₃(aq) is added to Cu₂(aq), a precipitate initially forms. Its formula is Cu(NH₃)². The correct option is d.

A chemical formula is a representation of chemical elements and chemical compounds. The chemical letters are used to write the chemical formula. The charges if present is written by charges symbols like plus, minus.

The chemical reaction is

NH₃(aq) + Cu₂(aq) = Cu(NH₃)²

This is called a chemical reaction, which contains reactant on the left side and products on the right side. The precipitate that is formed is copper ammonia whole twice.

Precipitation is the solid crystals' substance that is come out at the surface of the liquid. It is collected in solid form, and it is called a precipitate.

Thus, the correct option is d. Cu(NH₃)².

To learn more about chemical formulas, refer to the link:

https://brainly.com/question/15138610

#SPJ2

Answer:

Barium chloride is represented as BaCl2.

Explanation:

so answer is a.)2

I hope it's helpful!

Answer:

See explanation

Explanation:

Average heart beat = Number of heart beats/ time

7.0 years = 7.0 * 365 * 24 * 60 = 3679200 minutes

If there are 69 beats in 1 minutes

There are x beats in 3679200 minutes

x = 253865 beats

x = 254000.00 beats ( to 3 sf)

beats in 7.00 years = 254000.000 beats

beats in 7.000 years = 254000.0000 beats

Answer:

0.56 g

Explanation:

A chemist determines by measurements that 0.020 moles of nitrogen gas participate in a chemical reaction. Calculate the mass of nitrogen gas that participates.

Step 1: Given data

Moles of nitrogen gas (n): 0.020 mol

Step 2: Calculate the molar mass (M) of nitrogen gas

Molecular nitrogen is a gas formed by diatomic molecules, whose chemical formula is N₂. Its molar mass is:

M(N₂) = 2 × M(N) = 2 × 14.01 g/mol = 28.02 g/mol

Step 3: Calculate the mass (m) corresponding to 0 0.020 moles of nitrogen gas

We will use the following expression.

m = n × M

m = 0.020 mol × 28.02 g/mol

m = 0.56 g

Answer:

Explanation:

We define lattice energy as "the change in internal energy that accompanies the formation of one mole of the solid from its constituent gas phase ions." (Housecroeft and Sharpe, 2012).

Also, lattice energy depends on the size of the ions. In this case, the anion is the same so we consider the relative sizes of the cations. The smaller the size of the cation, the greater the quantitative value of the lattice energy.

Since Ca^2+ is smaller than K^+, the quantitative value for the lattice enthalpy of calcium bromide is larger than the value for the lattice enthalpy of potassium bromide.

no why

anser;

explinaton;

Answer:

a.

[tex]M_{CaBr_2}=40.08+79.9*2=199.88 g/mol[/tex]

b.

[tex]M_{BeBr_2}=9.012+79.9*2=168.81g/mol[/tex]

c.

[tex]M_{CdBr_2}=112.41+79.9*2=272.21g/mol[/tex]

d.

[tex]M_{CuBr_2}=63.55+79.9*2=223.35g/mol[/tex]

Explanation:

Hello!

In this case, since the molar mass of a compound is computed by adding the molar mass of each element composing it and multiplying it by the number of atoms in the molecule, we have:

a.

[tex]M_{CaBr_2}=40.08+79.9*2=199.88 g/mol[/tex]

b.

[tex]M_{BeBr_2}=9.012+79.9*2=168.81g/mol[/tex]

c.

[tex]M_{CdBr_2}=112.41+79.9*2=272.21g/mol[/tex]

d.

[tex]M_{CuBr_2}=63.55+79.9*2=223.35g/mol[/tex]

Best regards!

Answer:

1 mole of sodium chloride( NaCl)

=58.4g/mol

1 mole of nitrogen

=14.0g/mol

Answer:

The 91.8% is present as bicarbonate ion

Explanation:

It is possible to find pH of a buffer using H-H equation:

pH = pKa + log [A⁻] / [HA]

Where pH is 7.40; pKa is 6.36, [A⁻] is concentration of bicarbonate ion and [HA] concentration of carbonic acid

7.40 = 6.35 + log [A⁻] / [HA]

1.05 = log [A⁻] / [HA]

11.22 = [A⁻] / [HA] (1)

As the question is in therms of percentage:

[A⁻] + [HA] = 100 (2)

Replacing (2) in (1):

11.22 = [A⁻] / 100 - [A⁻]

1122 - 11.22[A⁻] = [A⁻]

1122 = 12.22[A⁻]

91,8% = [A⁻]

Answer:Cs2O + H2O —> 2CsOH [2Cs+ + 2OH-]

Explanation: Cs is the most electropositive element, with electron structure [Xe] 6s1.

Answer: I think its 32 I'm not sure

Explanation:

Answer:

700N

Explanation:

F=ma

mass=35

acceleration =20

Answer:

ummmmm huh?

Explanation:

.......im confused on the question

Answer:

The new pressure is 1,135.67 torr

Explanation:

Boyle's law establishes the relationship between pressure and volume of a gas when the temperature is constant, establishing that the pressure of a gas in a closed container is inversely proportional to the volume of the container. Mathematically, this law says that the product of pressure and volume is constant:

P*V=k

Charles's law establishes the relationship between the temperature and the volume of a gas when the pressure is constant. This law states that the volume is directly proportional to the temperature of the gas. So, Charles's law says that the quotient that exists between the volume and the temperature will always have the same value:

[tex]\frac{V}{T} =k[/tex]

Finally, Gay-Lussac's Law is a gas law that relates pressure and temperature at constant volume. This law says that the pressure of the gas is directly proportional to its temperature:

[tex]\frac{P}{T} =k[/tex]

Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:

[tex]\frac{P*V}{T} =k[/tex]

Analyzing an initial state 1 and a final state 2, it is satisfied:

[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]

In this case:

Replacing:

[tex]\frac{662 torr*46.7 L}{266 K} =\frac{P2*35 L}{342 K}[/tex]

Solving:

[tex]P2=\frac{342 K}{35 L} *\frac{662 torr*46.7 L}{266 K}[/tex]

P2= 1,135.67 torr

The new pressure is 1,135.67 torr

Answer:The majority of chemical processes are reactions that occur in solution. Important industrial processes often utilize solution chemistry. "Life" is the sum of a series of complex processes occurring in solution. Air, tap water, tincture of iodine, beverages, and household ammonia are common examples of solutions.

A solution is a homogenous mixture of substances with variable composition. The substance present in the major proportion is called the solvent, whereas the substance present in the minor proportion is called the solute. It is possible to have solutions composed of several solutes. The process of a solute dissolving in a solute is called dissolution.

Explanation:

The balls of the Newton’s cradle eventually stop because they loose energy as they collide.

The balls of the Newton’s cradle lose energy to the air as they move through it due to friction.

These balls make sound when they collide, and consequently the balls loose energy to heat upon collision.

The balls loose energy as they collide with each other and eventually stop.

Thus, we can conclude that the balls of the Newton’s cradle eventually stop because they loose energy as they collide.

Learn more about Newton’s cradle here: https://brainly.com/question/14063949

Answer:

5.90x10²² atoms of gold are present in the cube

Explanation:

First, we must find the volume of the cube in cm³. With density we can find the mass of the gold and the moles using its molar mass. As 1 mol = 6.022x10²³ atoms we can find the number of atoms:

Volume in cm³:

(10.0mm)³ = 1000mm³

1mm³ = 0.001cm³

1000mm³ * (0.001cm³ / 1mm³) = 1cm³

Mass gold:

1cm³ * (19.3g/cm³) = 19.3g Gold

Moles Gold:

19.3g * (1mol / 197.0g) = 0.0980 moles Gold

Atoms gold:

0.0980 moles Gold * (6.022x10²³ atoms / mol) =

Answer:

2 × 10⁻²² g

Explanation:

Step 1: Given data

Atoms of oxygen: 9 atoms

Step 2: Calculate the moles corresponding to 9 atoms of O

We will use Avogadro's number: there are 6.02 × 10²³ atoms of O in 1 mole of atoms of O.

9 atom × 1 mol/6.02 × 10²³ atom = 1 × 10⁻²³ mol

Step 3: Calculate the mass corresponding to 1 × 10⁻²³ moles of O

The molar mass of O is 16.00 g/mol.

1 × 10⁻²³ mol × 16.00 g/mol = 2 × 10⁻²² g

Answer:

odd

Explanation:

By applying the Nitrogen rule; A molecular ion with odd mass numbers will contain an odd number of a nitrogen atom, however, a molecular ion with an even mass number will contain either an even number of a nitrogen atom or no nitrogen.

So from the given information, the missing word is odd .

Answer: Fluorine

Explanation: Fluorine has an oxidation state of -1, meaning it gains 1 electron in chemical bonds, forming a negative ion. Magnesium has an oxidation state of +2, nitrogen has -3, and lithium has an oxidation state of +1.

Answer:

Fluorine.

Explanation:

I took this test not to long ago. I got this question correct. Also, the reason is because every other element is balanced.