Answer:
0
Explanation:
The neighbors displacement is 0 as displacement is how far the person is from their starting location. If they walk 2 miles away and then head back those 2 miles back to their house; 2-2=0
How much energy must be transferred out of the system as heat q to lower its temperature to 0∘c?.
Answer:
2.20 × 104 J
Explanation:
How much energy must be transferred out of the system as heat Q to lower its temperature to 0?C? ANSWER Q = 2.20 x 10^4. Cooling Power of P is 36.6 W.
Can someone help me with the entire magnetism gizmo. I can’t get on gizmo, but it has to be done
Answer:
sure how can i help my g gggg
a stone is thrown vertically upward with an initial velocity of 25m/s , calculate time taken to return to the thrower
Answer:
can you give me abrainlest??
In the diagram below if bulb 2 blew out what would happen to the VOLTAGE? (it’s not decreases that’s why it’s highlighted)
Answer:
apagado, así que lo más destacado es el problema, oh, está bien, esa es la respuesta, cariño.
The difference in particle size of the soil constituents determine its texture.
Answer:Soil texture depends on the size of individual soil particles and is determined by the relative proportions of particle sizes that make up the soil. The texture affects the amount of water that can be absorbed for use by plants and animals.
Explanation:
A negative charge is paced in an electric field that points west. What direction is the force on the negative particle?
Answer:
A positive charge placed in an electric field will tend to move in the direction of the electric field lines and a negative charge will tend to move opposite to the direction of the electric field lines.
One way to remember this is that there is one velocity, and so the thumb represents it. There are many field lines, and so the fingers represent them. The force is in the direction you would push with your palm. The force on a negative charge is in exactly the opposite direction to that on a positive charge.
Explanation:
Answer:
The force of the negative particle direction is East.
In motion pictures, what do you call the lens manipulation where the focus quickly changes from one subject to the next in a motion picture
Answer:
A film transition is a technique used in the post-production process of film editing and video editing by which scenes or shots are combined. Most commonly this is through a normal cut to the next shot. Most films will also include selective use of other transitions, usually to convey a tone or mood, suggest the passage of time, or separate parts of the story. These other transitions may include dissolves, L cuts, fades (usually to black), match cuts, and wipes.
Explanation:
The drag force on a falling coffee filter can be modeled as a linear function with respect to velocity, F⃗ D =−bv, where b is a positive constant related to the surface area and shape of the coffee filter. The teacher demonstrates how the value of constant b can be determined by releasing coffee filters from rest and having them fall toward a motion detector, as shown. The students repeat the activity and use the motion detector to measure the position, velocity, and acceleration of different coffee filters as they fall. Which of the following would provide the data needed to determine the value of b ?
Newton's second law and graphical analysis allow us to find the correct answer for the measure of the constant b is:
D) Stack several filters to change the mass measure the acceleration of the system.
Newton's second law establishes a relationship between the net force, the mass and the acceleration of the bodies.
∑ F = m a
Where the bold letters indicate vectors, F is the force, m the mass and the acceleration of the body.
They indicate that the drag force on the filters is
F = - b v
Where b is a positive constant that depends on the shape and area of the filter and v is the speed of the filter.
Let's write Newton's second law.
W - fr = ma
W -bv = ma
In the experiment the students indicate that they can measure the position, velocity and acceleration of the body.
Based on the above, if we place several filter weights and measure their speed and acceleration in each case, we can make a graph of velocity versus acceleration, we can take the value of the constant b from the slope.
Let's analyze the different answers:
A) False. The constant b depends on the shape of the filter therefore it must be kept constant.
B) False. The constant depends on the area, so it must be kept constant.
C) May be. In this case, since we have the terminal velocity, the acceleration is zero, Newton's second law remains.
B v - W = 0
b = [tex]\frac{W}{v}[/tex]
The problem with the method is the difficulty of measuring the compression terminal velocity.
D) True. According to the discussion of the velocity versus acceleration. graph, the constant b is equal to the slope of the graph.
E) May be. The problem with this method is finding a reliable value for the terminal velocity.
In conclusion, using Newton's second law and graphical analysis we can find the correct answer for the measure of the constant b is:
D) Stack several filters to change the mass measure the acceleration of the system.
Learn more here: brainly.com/question/2441565
HELP PLEASE : )
IT'S SCIENCE
Answer:
1. A and C are balanced forces as all the forces get cancelled by the opposite and equal force.
2. B and D as in B the Net force is 5N to the right and in D the Net force is 20N to the right.
3. This would be all the unbalance forces which are B and D
4. B would be moving 5N to the right and D would move 20N to the right.
I’m not sure what this is… help please
Answer:
A) Slower
Explanation:
Less / low energy means less / slower speed.
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
A student tested a variety of interacting forces to determine how they would result in motion of an object. If the student used the forces as shown in the lettered choices above, predict which results would occur. Select ALL that apply.A) The variable shown by letter B would result in a movement of the object to the left. B) The variable shown by letter B would result in a movement of the object to the right. C) The variable shown by letter A would result in a movement of the object to the right. D) The variable shown by letter C would result in a movement of the object to the right. E) The variable shown by letter D would result in a movement of the object
Answer:
A, D, C
Explanation:
How fast should a girl of 35 kg run so that her kinetic energy becomes 700J
of?
Answer:
√40m/sec
Explanation:
As we know Kinetic energy = 1/2 mv^2
700 = 1/2 x 35 x v^2
1400/35 = v^2
√40 = v
So v, √40m/sec
Hope this helps you.
whats 1+0 n3rje'hefruhhhhhhhhhhhhhhhhhhhhhhhhtrrrrrrrrrrrrr
Answer:
1
Explanation:
cause 1+0=1
A 800N mountain climber scales a 140m cliff. How much work is done by the mountain climber?
Answer:
112 [kJ]
Explanation:
1) related formula is: A=F*S, where A - required work [J], F - force [N], S - distance [m].
2) according to the formula above: A=140*800=112000[J]=112 [kJ]
Answer:
112000 J
Explanation:
800N x 140m
Agatha the snake is 50 centimeters long.3 years from now she will be 152 centimeters long and fully grown. If Agatha grows at constant rate, how much does she grow in length each year
Answer: 34cm each year
Explanation:
A 50-kg girl lifts a 1-kg box vertically upward a distance of 0.5 meter. How
much work is done on the box?
Answer:
Given mass = 2kg, height = 10m,g = 9.8.
We know that Work done W = FD
= > W = (mg)(D)
= > W = (2 * 9.8)(10)
= > W = 196 Joules.
Explanation:
Yan :).
HELP
How much heat energy is required to raise the temperature of 37.5g of water from 23.0°C to 55.2°C? The specific heat for water is 4.184 J/g°C. (Include your calculation to receive credit.)
Answer: 5.05 J
Explanation:
Qcalorimeter: m*c* ΔT --> (37.5g)*(4.184J/g ° C)*(55.2 °C – 23.0 °C) Qcalorimeter: 5.05 J
According to specific heat capacity, 5.052 kJ of heat energy is required to raise the temperature of 37.5 g of water from 23.0°C to 55.2°C.
What is specific heat capacity?Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.
It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.
It is given by the formula ,
Q=mcΔT
Substitution in above formula, givesQ= 37.5×4.184×32.2=5052.18 J or 5.052 kJ.
Thus , 5.052 kJ of heat energy is required to raise the temperature of 37.5g of water from 23.0°C to 55.2°C.
Learn more about specific heat capacity,here:
https://brainly.com/question/28941910
#SPJ2
using the methos of dimensions derive an expression for the centripetal force f acting on a particle of mass m mivingv with velocity v in a circle of radius r?
According to the Question:
[tex]\footnotesize\implies F \propto [m]^x [v]^y [r]^z[/tex]
[tex]\footnotesize\implies F =k [m]^x [v]^y [r]^z \:...(i)[/tex]
K = Dimensionless ConstantNow, substituting Dimensions of each physical quantity in equation (I):
[tex]\footnotesize\implies [M^1L^1T^{-2}] =[M^1L^0T^0]^x [M^0L^1T^{-1}]^y [M^0L^1T^0]^z[/tex]
[tex]\footnotesize\implies [M^1L^1T^{-2}] =[M]^x [L]^{y + z} [T]^{ - y}[/tex]
On comparing the powers of LHS and RHS:
[tex]\implies \bf x = 1[/tex]
[tex]\implies - y = - 2[/tex]
[tex] \implies \bf y = 2[/tex]
[tex]\implies y + z = 1[/tex]
[tex]\implies z = 1 - 2[/tex]
[tex]\implies \bf z = - 1[/tex]
[tex]\footnotesize\implies F = [m]^x [v]^y [r]^z[/tex]
[tex]\footnotesize\implies F = [m]^1 [v]^2 [r]^{ - 1}[/tex]
[tex]\implies\footnotesize \underline{ \boxed{ \bf \red{ F = \frac{m {v}^{2} }{r} }}}[/tex]
Numerical
What mass must be suspended from a steel wire 2m long and 1mm diameter to stretch it by 1mm
By young’s theory
Answer:
Thus, 4 kg mass must be suspended from a steel wire 2 m long and 1 mm diameter to stretch it by 1 mm.
Explanation:
How to convert acceleration to velocity.
You can't. Velocity and acceleration measure two different things, so their units are incompatible. It's like asking, "How many meters does this book weigh?"
Maybe you mean "find" acceleration using given velocities, or a velocity function?
the place from which motion is observed and measured is called
Answer:
A frame of reference is the location from which motion is perceived and measured. For all observers, the speed of light remains constant.
Explanation:
The place from which motion is observed and measured is called frame of reference .
What is a frame of reference?Frame of reference is an abstract coordinate system whose origin , orientation , and scale are specified by a set of reference points .
The place from which motion is observed and measured is called frame of reference . The set of conditions that determine how to approach or observe something will depend on its reference frame .
In order to know the change in position of an object , a reference point is required . example : in a cartesian system origin is the reference . With respect to origin only every other things are observed .
A coordinate system with time frame is called frame of reference
Learn more about frame of reference
https://brainly.com/question/12222532?referrer=searchResults
#SPJ3
Name any three things that cause soil pollution
Answer:
garbage , polluted water dam, unexpected dust particle
I will give a 5-star answer and Brainlest
Direct contact is necessary for which type of energy transfer?
A. Conduction
B. Sound Waves
C. Convection
D. Radiation
Answer:
D
Explanation:
Examples of energy conversion in daily life
Answer:
Energy conversion, also termed as energy transformation, is the process of changing one form of energy into another. Energy conversion occurs everywhere and every minute of the day. There are numerous forms of energy like thermal energy, electrical energy, nuclear energy, electromagnetic energy, mechanical energy, chemical energy, sound energy, etc. On the other hand, the term Energy Transformation is used when energy changes forms from one form to another. Whether the energy is transferred or transformed, the total amount of energy doesn’t change and this is known as the Law of Conservation of Energy.
Explanation:
hope this helps please give me brainly have a great day (☞ﾟヮﾟ)☞(¬‿¬)( •_•)>⌐■-■ヾ(⌐■_■)ノ♪
A 0.04 kg honeybee circles a field looking for a flower upon which to land. The radius of the circle she travels is 2.5 m and it takes her 1.57 s to complete the circle.
Find the following:
a) Tangential Velocity
b) Centripetal Acceleration
c) Centripetal Force.
For the honeybee that circles a field looking for a flower upon which to land, we have:
a) The tangential velocity is 10.01 m/s.
b) The centripetal acceleration is 40.1 m/s².
c) The centripetal force is 1.60 N.
a) The tangential velocity can be calculated as follows:
[tex] v = \omega r = \frac{2\pi r}{T} [/tex] (1)
Where:
r: is the radius of the circle = 2.5 m
ω: is the angular velocity = 2π/T
T: is the period = 1.57 s
By entering the above values into equation (1), we have:
[tex] v = \frac{2\pi r}{T} = \frac{2\pi 2.5 m}{1.57 s} = 10.01 m/s [/tex]
Hence, the tangential velocity is 10.01 m/s.
b) The centripetal acceleration is related to the tangential velocity as follows:
[tex] a_{c} = \frac{v^{2}}{r} = \frac{(10.01 m/s)^{2}}{2.5 m} = 40.1 m/s^{2} [/tex]
Therefore, the centripetal acceleration is 40.1 m/s².
c) The centripetal force is given by:
[tex] F = ma_{c} [/tex]
Where:
m: is the honeybee's mass = 0.04 kg
[tex] F = ma_{c} = 0.04 kg*40.1 m/s^{2} = 1.60 N [/tex]
Hence, the centripetal force is 1.60 N.
Find more here:
https://brainly.com/question/823034?referrer=searchResultshttps://brainly.com/question/25776956?referrer=searchResultsI hope it helps you!
Physics Physics Physics - 10
Answer:Pulley , Wheel and axle , Screw , wedge , Incline
Explanation:
Answer: below .
Explanation:
Pulley , Wheel , axle , Screw , wedge , Incline
HOPE IT HELPS YOU .PLEASE GIVE BRAINLIEST .THANKS .
What is a net force on an object that has a mass of 20.0 kg, an applied force of 100 n moving on a surface with a friction coefficient of 0.21?
The net force on the object as described is; 58.84N
Two forces acting on the object are;
The applied force and the frictional force.In essence; the frictional force can be evaluated as;
Frictional force; = coefficient × Weight of object.Frictional force = 0.21 × 20 × 9.8.Frictional force = 41.16NThe Net force = Applied force - frictional forceNet force = 100 - 41.16NNet Force = 58.84 N.
Read more:
https://brainly.com/question/94428
PLS HURRY THIS IS DUE TODAY!!!
I WILL GIVE BRAINLIEST!!!!
NO LINKS AND NO STEALING POINTS,
PLS ANSWER IF YOU KNOW FOR SURE WHAT IT IS!!!
THE QUESTION IS IN THE PICTURE ATTACHED!
Answer:
B. between carbon and oxygen
Explanation:
formaldehyde has a carbon atom that has single bonds with two hydrogen atoms on both sides, and it has a double bond with oxygen.
Answer:
The placement of the double bond is between carbon atom and oxygen atom
this same question was for me so I did and got it correct
please mark me as brainliest
State the general purpose of an experiment, using the terms dependent and independent variable
Answer:
Image result for State the general purpose of an experiment, using the terms dependent and independent variable
You can think of independent and dependent variables in terms of cause and effect: an independent variable is the variable you think is the cause, while a dependent variable is the effect. In an experiment, you manipulate the independent variable and measure the outcome in the dependent variable
Mark me Brainliest
SECOND remake of a question i made... IF YOU PLACE ANY NON-BRAINLY QUESTION LINK I WILL LOOSE MY (QUACK)ING MIND BECAUSE IM HAVING ENOUGH OF PEOPLE BREAKING MY BRAINLY!
(the screenshot is the original question that was broken by Brianbobtv placing a virus link into the answer box... and the first remake was broken by Brianfps for the same thing but a different virus link [a common one you'll see] please read everything in the screenshot before answering)
For the love of all that is holy and not, please don't place a link at all... or ill loose my mind im surprised i didn't loose it yet from the second brainly break... the screenshot is everything from the first question of this... the second is the question separated from the original question... the third is the star amount meaning
Answer:
C.) decreases, stronger
Explanation:
Since gravitational force is inversely proportional to the square of the separation distance between the two interacting objects, more separation distance will result in weaker gravitational forces. So as two objects are separated from each other, the force of gravitational attraction between them also decreases; however, as the two objects are closer to each other, the force of the gravitational attraction between them also increases (stronger).
