Answer:
excessive growth of algae that kills other organisms
Explanation:
if they eat more than it would delete the algea levels. This is should be right.
What is torque measured in in physics?.
Newton-meters are used as the torque SI unit. Foot-pounds are frequently used in imperial units.
What exactly did Newton discover?Sir Isaac He is credited with much more than only revelation of the theory of physics; he also created a number of both the fundamental concepts regulating visible light, the laws of motion, and made important contributions to calculus.
how much 300 newtons of force?A 1 kilogram item can accelerate by 1 m per seconds square with a 1 Newton (N) force applied. A 1 kilogram object might be propelled by 300 N of force at a speed of 300 meters per second square or a 300 kg object at a speed of 1 meter per second squared. A 300 N force is considered to be a sizable force.
To know more about torque visit:
https://brainly.com/question/30338175
#SPJ4
all energy transformations in an ecosystem begin with
a. a scavenger
b. the sun
c. a decomposer
d. a herbivore
All energy transformations in an ecosystem starts with the sun.
In the ecosystem, every living being depends on some kind of energy to survive. There are different types of sources of energy in the world. Like: Solar energy, wind energy, tidal energy, fuel energy.
However sun is the only reason behind every transformation of energy. For example wind energy generates from the movement of the wind. But wind is generated due to the pressure difference of two different placed, and this pressure difference is due to the temperature difference of that places. Which ultimately depends on the sun.
In other example, fuel energy derived from the fossils. Fossils are the decomposition of dead plants and animals in the presence or absence of oxygen. But theses plants and animal needs solar energy for photosynthesis and for their survival. So we can say that the sun is the only reason behind every transformation of energy in the eco system.
Hence the option b is correct.
To know more about ecosystem, here
https://brainly.com/question/13979184
#SPJ4
What phase is it when molecules move away from each other?.
When molecules are in the gaseous phase they tend to move away from each other as no intermolecular forces is acting upon them.
Particles in a gaseous phase are well separated with no regular arrangements. The gas particles vibrate and move freely at very high speeds.
The states of matter depends on the balance between the kinetic energy of the individual particles (atoms or molecules) and the intermolecular forces. the kinetic energy keeps the molecules apart and moving around, and is a function of the temperature of the substance and the forces try to draw the particles together.
Heating and cooling can also change the kinetic energy of the particles in a substance and so it can be said that we can change the physical state of a substance by changing its temperature.
Learn more about kinetic energy here:
https://brainly.com/question/15764612
#SPJ4
Why the tools meant for cutting and piercing always have sharp edges
The tools meant for cutting and piercing always have sharp edges because they have less area of contact.
Less area of contact means that the tools can apply more pressure while cutting. It also becomes easier as the surface area is less, more pressure will be applied on the object.
According to the formula P= F/A, force is directly proportional to the pressure, and according to the theory of less area of contact, cutting tools always have sharp edges not blunt edges.
For example, tools used for cutting edges such as blades, knives, etc., are provided with sharp edges to cut things easily.
Learn more about less area of contact,
https://brainly.com/question/30317965
there are various stages in the formation of coal as heat and pressure are increased and moisture content is decreased. these stages, in order, are
The correct order of coal formation is a) Peat b) lignite c) bituminous coal and d) Anthracite.
All the stages of coal formation depend on the conditions in which the plant was buried.
Peat: This is the stage-1 process of coal formation, when the decomposition of the plant of takes place in the absence of oxygen. e.g.:- underwater. This leads to the presence of organic content in the coal.
Ligament: It is when buried plant is subjected to the increased vertical pressure from continuously accumulating sediments.
Bituminous coal: it is the third stage in which plant traces gets disappeared. It is mostly used as a source of heat energy.
Anthracite: it is the 4th stage, in which coal becomes "hard coal" due to the presence of high heat and high pressure. it burns with short flames and less smoke.
To know more about bituminous, here
https://brainly.com/question/2447546
#SPJ4
find the ratio of acceleration due to gravity of two planets if their radii are in ratio of 1:3
Answer:
Ratio of g = 9:1
Explanation:
Given,
The ratio of the radius of planets = 1:3
let the mass of the planets be M
We can say that,
The radius of planet 1 = 1x
The radius of planet 2 = 3x
We know that g = GM/[tex]R^{2}[/tex]
g on first planet = GM / [tex]x^{2}[/tex] , g on second planet = GM/ 9[tex]x^{2}[/tex]
g on first planet: g on second planet = GM/[tex]x^{2}[/tex] * 9[tex]x^{2}[/tex] / GM
= 9:1
What is the instantaneous velocity at t 1?.
Given that our line depicts the displacement of our object over time and that an object's instantaneous velocity (at t=1 is zero) is the derivative of that object's displacement at a particular point.
As we saw in the section above, we can also state that the instantaneous velocity at time t = 1 is roughly 2 meters per second. The limit of an object's average velocity as time passes toward zero is the object's instantaneous velocity.
By dividing the amount of time it took an object to go a certain distance by the overall distance, one can calculate the object's initial velocity. V, d, and t are the variables in the equation:
V = d/t, where V is the speed and t is time.
Learn more about velocity Visit: brainly.com/question/2234298
#SPJ4
find the magnitude of the resultant force and the angle it makes with the positive x-axis.
In order to find the magnitude of the resultant force and the angle it makes with the positive x-axis, you will need to know the magnitudes and directions of the individual forces acting on the object, as well as their point of application.
This information can then be used to calculate the vector sum of the forces using vector addition. The magnitude of the resultant force can be found using the Pythagorean theorem, and the angle it makes with the positive x-axis can be found using trigonometry.
To find the magnitude of the resultant force, you can use the Pythagorean theorem to calculate the length of the hypotenuse of a right triangle formed by the individual forces. The magnitude of the resultant force is equal to the square root of the sum of the squares of the magnitudes of the individual forces.
To find the angle that the resultant force makes with the positive x-axis, you can use trigonometry. The angle is found by taking the arctangent of the y-component of the resultant force divided by the x-component of the resultant force.
To learn more about resultant force
https://brainly.com/question/14447139
#SPJ4
the full-load current of a 25-horsepower, 480-volt, 3-phase, squirrel cage induction motor is ? .
The full-load current of a 25-horsepower, 480-volt, 3-phase, squirrel-cage induction motor is 12.7 A.
To calculate the full-load current of a 25 horsepower, 480-volt, 3-phase, squirrel-cage induction motor, you can use the formula:
Full-load current (I) = (Horsepower * 746) / (Voltage * 1.73 * Power factor)
where 1.73 is the square root of 3, which accounts for the 3-phase power and Power Factor is assumed to be 0.8
Plugging in the given values, we get:
I = (25 * 746) / (480 * 1.73 * 0.8)
I = 25746/(4801.73*0.8)
I = 25746/(4803.07)
I = 25*746/1478.4
I = 25*0.508
I = 12.7 A
Therefore, the full-load current of a 25-horsepower, 480-volt, 3-phase, squirrel-cage induction motor is 12.7 A.
It's worth noting that this is just an approximation and the current can vary depending on the motor design, the load and the power factor.
Learn more about full-load current:
brainly.com/question/30001500
#SPJ4
A heater marked 60W evaporates
6x10-³ kg
of boiling water in 60 seconds. What is the
specific latent heat of vaporization of water in
Jkg
Answer:
L = E / M energy input / water evaporated (J/kg)
E = 60 J / s 60 J input in 1 sec
L = 60 J / (.006 / 60) kg = 600,000 J / kg
The specific latent heat of the vaporization of water is 6×10⁵ J/kg.
The amount of heat required to evaporate a certain mass of water can be calculated using the formula:
Q = ml
where Q is the heat required, m is the mass of water evaporated, and l is the specific latent heat of vaporization of water.
In this problem, we know that a heater with a power output of 60W evaporates 6x10⁻³ kg of boiling water in 60 seconds. We can calculate the amount of heat supplied by the heater using the formula:
Q = Pt
where P is the power of the heater and t is the time for which it is operating. Substituting the given values, we get:
Q = 60 W × 60 s
Q = 3600 J
We can now calculate the specific latent heat of the vaporization of water by rearranging the formula:
l = Q/m
Substituting the given values, we get:
l = 3600 J / (6×10⁻³kg)
l = 6×10⁵ J/kg
Therefore, the specific latent heat of the vaporization of water is equal to 6×10⁵J/kg.
To learn about specific heat click:
https://brainly.com/question/11297584
#SPJ2
How do you memorize Newton's laws?.
Newton's 1st, 2nd, 3rd, and 4th laws are 1) Law of inertia 2) Force's law and 3) Action-reaction relationship.
Newton's 1st law is also called the law of inertia. A balling rolling on the ground stops after some time due to the opposite force of friction working between the ball and the ground.
Newton's 2nd law of force states that the rate of change of momentum of an object is equal to the force applied by the object. When a bullet is fired from a gun change in the momentum of the bullet generate the force that cause the bullet to be fired and to generate the recoil velocity in the gun.
Newton's 3rd law states the action-reaction relationship. When a rocket is launched from the earth, it applies a force on the ground that generate the enough reaction force that causes the rocket to generate orbital velocity.
To know more about rate of change of momentum, here
https://brainly.com/question/29897173
#SPJ4
A 45-kg boy is riding a 15-kg bicycle with a speed of 8 meters per second. What is the combined kinetic energy of the boy and bicycle?.
The sum of the kinetic energy of the boy and the bicycle is 1920 J.
Given data:
Boy's weight is m=45.0kg
The mass of the bike is M = 15.0 kg.
The speed of the bicycle is v = 8.00 m/s.
The kinetic energy of an object is defined as the energy that an object has due to its motion. The combined kinetic energy of the boy's bicycle system is given by:
KE= 0.5 (m+M) v²
Resolve by replacing the values with:
KE = 0.5 (45 + 15) * 64 joules
ke=1920
From this we can conclude that the combined kinetic energy of the boy and the bicycle is 1920 J.
Learn more about kinetic energy
brainly.com/question/22174271
#SPJ4
What is the SI unit of mass Mcq?.
The SI unit of mass is kg.
The International System of Units is the worldwide standard for expressing magnitudes or quantities of important natural phenomena. This system of units, also called the metric system, is commonly abbreviated to SI. It derives from its original French name Système international d'unités.
Mass is a quantitative measure of inertia in physics, a fundamental property of all matter. In effect, it is the resistance that an object offers to changes in velocity or position when a force is applied. The greater the mass of an object, the smaller the change caused by an applied force.
Mass is one of the fundamental properties of matter. The mass of an object is a measure of the amount of matter in it. The SI unit of mass is the kilogram (kg). The mass of an object is always constant. Weight is a measure of the weight acting on the body.
To know more about mass click here:
https://brainly.com/question/19694949#
#SPJ4
consider three resistors with resistances 20 ω, 30 ω and 50 ω that are connected in series. what is the equivalent resistance of the three resistor series network?
The equivalent resistance of the three-resistor series network would be 100 ω.
The equivalent resistance of a three resistor series network composed of resistances 20 ω, 30 ω and 50 ω can be determined by adding the individual resistances together.
In this case, the equivalent resistance of the three resistor series network is 100 ω, as 20 ω + 30 ω + 50 ω = 100 ω.
When resistors are connected in series, the total resistance of the circuit is equal to the sum of the individual resistances.
This is because current passing through the circuit must pass through each resistor in series, thus reducing the overall resistance of the circuit.
As such, the equivalent resistance of the three resistor series network is 100 ω.
To learn more about resistance, click here:
https://brainly.com/question/11431009
#SPJ4
Joshua's Subaru Forrester was detected exceeding the posted speed limit of60 kilometers per hour, how many kilometers per hour would h ehave been traveling over the limit if he had covered the a distance o f1 0 kilometers in 0.1 hours? If you want to express this value as a velocity, what other information would you need to provide?
6.2137119 miles per hour is equal to 10 km/h. (8 digits rounded) Speed is measured in kilometers per hour.
What additional information is needed for velocity that is not needed for speed?Distance must be known in order to calculate velocity, but not the other way around. Speed does not take into account the direction in which an object is moving, whereas velocity does. Velocity does not take into account the amount of time it took an object to traverse; speed does.According to the equation v = s/t, velocity (v) is a vector quantity that quantifies displacement (or change in position, s), over change in time (t). Speed (or rate, r) is a scalar number that represents the amount of time (t) spent travelling over the distance (d), as shown by the equation r = d/t.An object's velocity is its rate of movement in a specific direction. These cars' velocities may be comparable despite their speeds.To learn more about kilometers refer to:
https://brainly.com/question/17273444
#SPJ1
Two 12-2 AWG and two 14-2 AWG nonmetallic-sheathed cables enter a box. Each cable has an equipment grounding conductor. The 12 AWG conductors are connected to a receptacle. Two of the 14 AWG conductors are connected to a toggle switch. The other two 14 AWG conductors are spliced together because they serve as a switch loop. The box contains two cable clamps. Calculate the minimum cubic-inch volume required for the box
The total number of conductors, the kind of cable clamps being used, and any additional devices in the box must all be taken into account when determining the minimum cubic-inch capacity needed for the box.
In this case, you have two 12-2 AWG and two 14-2 AWG nonmetallic-sheathed cables, which means a total of 8 conductors.
The two 14-2 AWG conductors are spliced together and serve as a switch loop, so they count as 2 conductors.
The 12-2 AWG conductors are connected to a receptacle, which is 2 conductors. The two 14-2 AWG conductors are connected to a toggle switch, which is 2 conductors.
The minimum cubic-inch volume required for the box is determined by the National Electrical Code (NEC). According to the NEC, the minimum box volume for 8 conductors is 18 cubic inches.
This is based on the assumption that cable clamps are used and that the box is not crowded with any other devices.
In conclusion, the minimum cubic-inch volume required for the box in this scenario is 18 cubic inches.
To know more about Conductors,
https://brainly.com/question/13166692
#SPJ4
What are the 3 methods for solving equations?.
3 methods of solving an equation are 1) Graphical method 2) Substitution method 3) Cross multiplication method.
Graphical method: To solve linear equations graphically, first draw the graph for both equations in the same coordinate graph and locate the intersection point on the graph.
Substitution method: To solve a linear equation using this method, first, take the value of one variable separately from any of the equations. Then, substitute the value of this variable in the second equation and solve it.
Cross multiplication method: Linear equations can be easily solved using this method. In this technique is used to simplify the solution. Following formula is used for solving 2 variable equation:
x /(b₁ c₂ − b₂ c₁) = y / (c₁ a₂ − c₁ a₁) = 1 /(b₂ a₁− b₁a₂)
To know more about Graphical method, here
brainly.com/question/29193266
#SPJ4
What is the SI unit of pressure Mcq?.
What are the disadvantages of ballistic stretches?.
The biggest drawback of ballistic stretching, aside from the risk of damage, is that it doesn't give the stretched muscle enough time to adjust to the extended position.
Instead can make the muscles tighten up by continually inducing the stretch response (or myotatic reflex). Overstretching or bouncing might be detrimental. Microtrauma or rips in the muscles or connective tissue may result from it. As a result, this can produce a flaw that manifests itself later on in the run. Stretching should be done for a set amount of time, usually between 5 and 10 minutes.
Reduced maximal strength when done before strength training; decreased long-term training benefit when done before or during strength; increased chance of injury when done before strength or endurance training.
Learn more about ballistic Visit: brainly.com/question/2405479
#SPJ4
What is the relationship between force lever and angle torque?.
The relation between the force and the angle is given by the formula, τ = r × F, where, r is the perpendicular distance, F is the force.
It is also described as the cross product of distance vector and force vector. Mathematically, τ = r × F = r F sinθ, where, θ is the angle between r and F.
For example, a force is applied to a particle free to rotate about a fixed axis. Force is divided into perpendicular and parallel components. Torque is pointed outward from the page and has the magnitude
τ = r F sinθ.
Newton-meters, sometimes known as N.m, are the SI units for torque. Although these units are the same as joules, torque isn't considered to be work or energy, therefore N.m should be used instead.
To know more about torque:
brainly.com/question/30187149
#SPJ4
How many moles are present in 10. 0 grams?.
In this case, 0.25 moles are present in 10 gram.
The amount of moles in 10 g of sodium hydroxide (NaOH) is known to be 0. NaOH equals 0.25 moles in a mole. Inferred from the query that In 10, 0 grams of sodium hydroxide.
How many moles are there? (NaOH ) : You must adhere to the grams to moles formula in order to accurately calculate the number of moles, n, of a substance with a given mass, m, (in grams): The molar mass of this substance is M, and n = m / M.
NaoH = 40 is typically used to calculate sodium hydroxide's molar mass.
moles = 10 /40 = 0.25
Learn more about moles Visit: brainly.com/question/2288624
#SPJ4
Mass is a better measure of the amount of matter than weight is because:
A) mass is dependent upon location. B) mass is easier to measure.
C) mass is independent of location.
D) mass is measured using the metric system.
Mass is a better measure of the amount of matter than weight is because: C) mass is independent of location. Therefore, option C is the correct answer.
What are Mass and Weight?The mass of an object is a measure of how much object it contains. The kilogram (kg) is the fundamental SI ( International System of Units) unit of mass. On the other hand, weight is a unit of force equal to the gravitational pull on an object. The terms mass and weight are frequently confused. However, the main distinction between the two is their reliance on location.
The weight of an object is dependent on its location, whereas its mass is independent of its location. For example, the gravitational force on the moon is approximately one-sixth than the gravitational force on Earth. As a result, an object will weigh six times more on Earth than it will on the moon. On the other hand, mass does not change with location because it is determined solely by the amount of matter present in an object. Therefore, the mass of an object on the moon and on Earth is the same.
Here to learn more about Mass and Weight:
https://brainly.com/question/86444
#SPJ4
A system of objects that are not moving with respect to one another
a. frame of reference
b. relationships
c. reference point
d. relative motion
A system of objects that are not moving with respect to one another frame of reference. A frame of reference is a set of objects that are not moving relative to each other. It is used to define the position and motion of objects in space.
This is a basic concept in physics and is used to provide a point of reference for measuring and comparing the motion of objects. For example, when measuring the motion of a car in terms of distance and time, the starting position of the car is considered the reference point, and the motion of the car is measured relative to that point.
The frame of reference is also used when measuring the motion of objects in a rotating system, such as the planets in the solar system. In this case, the center of the system is the reference point and the motion of the planets is measured relative to it. Understanding how frames of reference work are important for understanding the laws of motion and the principles of mechanics.
To know more about frames of reference refer to the link brainly.com/question/30116321
#SPJ4
Determine the magnitude and coordinate direction angles of the resultant force acting on the bracket?
For force F2 cos2 c + cos2 c + cos2 45 + cos2 * 60 = 1 cos c = 0.5 c = 60 degree, force F1 = 450 * (cos(45) * cos(30) j - cos(45) * sin(30) i + sin(45) k).
What is a force in science?
In science, the term "force" has a particular definition. At this point, describing a force as a push or a pull is perfectly acceptable. There is no such thing as a force that an object "has in it" or "contains." A force is applied to one thing by another.
What different types of force are there?
A force is a push or pull that an object feels as a result of interacting with another object. The Force of Friction is one of many forces. Tension force Standard Force.
To know more about force visit:
brainly.com/question/13191643
#SPJ4
For full question refer the image.
A car slams on its brakes creating an acceleration of -3.2 m/s2. It comes to rest after traveling a distance of 210 m. What was its velocity before it began to accelerate?
The answer should be 36.6 m/s -Show work!
The velocity of the car before it began to accelerate is 36.6 m/s.
What is the initial velocity of the car?
The initial velocity of the car is calculated by applying the third kinematic equation.
v² = u² - 2as
where;
v is the final velocity of the caru is the initial velocity of the cara is the acceleration of the cars is the distance travelled by the carWhen the car stops, the final velocity, u will be equal to zero.
v² = u² - 2as
0 = u² - 2as
u² = 2as
u = √ (2as)
u = √ ( 2 x 3.2 x 210 )
u = 36.6 m/s
Learn more about initial velocity here: https://brainly.com/question/19365526
#SPJ1
Light can travel through materials that you cannot see through, like wood or aluminum foil.
It is accurate to say that light can pass through opaque materials like wood and aluminum foil.
Describe light.Electromagnetic radiation that appears to human eyes as light. The spectrum of electromagnetic radiation's wavelengths is very wide. Light carries information about time and space. For the study of optics, optical communications, and a wide range of other related, both established and emerging technologies, this characteristic serves as the fundamental building block.
Examples of technologies that manipulate light include lasers, holography, and fiber-optic communication systems. In a vacuum, all forms of light travel at the same speeds as the electromagnetic spectrum, of which only a small portion is visible to humans. Furthermore, it is without a doubt possible for non-visible light to pass through wood, including radio waves, x-rays, and photons with gamma energy.
Because of this, it is true that light can pass through opaque materials like wood and aluminum foil.
To know more about light visit:
https://brainly.com/question/20478728
#SPJ4
Complete question " TRUE OR FALSE Light can travel through materials that you cannot see through, like wood or aluminum foil".
Kristen's calculations involving lobsters found that the averagelobster, when placed on the ground, was able to cover 20 centimeters in 5 seconds, what was the average speed of the lobster?
Answer:
4 cm/s
Explanation:
Speed = distance over time
What comes to mind when you hear the term acid?
A Brnsted-Lowry acid or Lewis acid is a molecule or ion that can either donate a proton (the hydrogen ion, H+) or establish a covalent bond with an electron pair.
What is acid?Proton donors, also known as Brnsted-Lowry acids, are the first class of acids. Proton donors, also referred to as Arrhenius acids, generate the hydronium ion H3O+ under the unique situation of aqueous solutions.
The Arrhenius theory was expanded upon by Brnsted and Lowry to take non-aqueous solvents into account.
A hydrogen atom is typically bound to a chemical structure in a Brnsted or Arrhenius acid that is still energetically advantageous after the loss of H+. Aqueous Arrhenius acids have distinguishing characteristics that serve as a useful definition of an acid.
Therefore, A Brnsted-Lowry acid or Lewis acid is a molecule or ion that can either donate a proton (the hydrogen ion, H+) or establish a covalent bond with an electron pair.
To learn more about Acids, refer to the link:
https://brainly.com/question/14072179?
#SPJ1
PLEASE HELP I WILL GIVE 20 POINTS TO THE ANSWER!!!! A 1500 kg high performance racecar can exert an average force of 15,000 Newtons to accelerate from o to 100 mph (45 m/s).
How much time will it take to reach this speed?
It will take 5x105 seconds to get to this pace.
What is speed and what is its unit in physics?Speed refers to the rate at which a length varies over time. It has a time-distance dimension. The outcome is the High silica element of speed, which combines the fundamental time units and the fundamental measure of length. As a result, the SI unit for velocity is the metre per second, or m per s.
What does velocity vs. acceleration mean?Velocity is the term for the rate of movement. The measurement of a velocity shift called acceleration. Given that it includes both magnitude and direction, it is a vector quantity. Due to the fact that it determines how quickly velocity changes, acceleration is just a vector quantity.
To know more about Speed visit:
https://brainly.com/question/28224010
#SPJ1
A 0.003 kg copper penny drops a distance of 50.0 m to the ground
If 65% of the initial potential energy goes into increasing the
internal energy of the penny, determine the magnitude of the
increase.1
As per the law of conservation of energy, since the work done on the object is equal to m×g×h, the energy gained by the object = m×g×h, which in this case is the potential energy E.
The force acting on the two objects affects the potential energy formula. The formula for gravitational force is P.E. = mgh, where g is the acceleration caused by gravity (9.8 m/s2 at the earth's surface) and h is the height in metres.
Similar to this, when a spring is moved away from its equilibrium position, it gains some energy, which we can notice by the stress our hands experience when we stretch it. Potential energy is a type of energy that arises from a change in its position or state, according to our definition.
Let's learn the formula, unit, and examples of potential energy after understanding potential energy and what it means.
m is the mass in kilograms
g is the acceleration due to gravity
h is the height in meters
Potential Energy Unit
Gravitational potential energy has the same units as kinetic energy: kg m2 / s2
Note: All energy has the same units – kg m2 / s2, and is measured using the unit Joule (J).
To learn more about potential energy refer to :
https://brainly.com/question/24284560
#SPJ1