imagine this star has the same power as our sun. calculate the surface area of this star considering the stefan-boltzmann law. recall that our sun emits 3.8 x 1026 w, and that , the stefan-boltzmann constant, is 5.67 x 10-8 w/m2k4.

The amount of current that is flowing in a wire is calculated by dividing the total charge (in coulombs) by the amount of time (in seconds).

Thus, in the case of 0.67 C of charge passing through a point in the wire in 0.30 s, the current can be calculated by dividing 0.67 C by 0.30 s, which yields a result of 2.2 A.

Current is measured in amperes (A) which is a measure of the flow rate of electric charge. One ampere is equal to the flow of one coulomb of charge per second. Therefore, the current in the wire is 2.2 A.

The current is a measure of how much charge is moving through the wire each second, and it is an important factor in determining the amount of power being transferred through the wire. In the case of the 0.67 C of charge that passes through the wire in 0.30 s, the current is 2.2 A, meaning that 2.2 C of charge passes through the wire each second. This current is what allows electricity to be transferred through the wire and used for different applications.

Know more about Amperes  here

https://brainly.com/question/31971288#

#SPJ11

The amount of entropy created in the process is A) 0.32 J/K.

This problem involves an irreversible engine that operates between two temperatures and extracts heat from a hot reservoir to produce work. According to the second law of thermodynamics, any process that produces work necessarily creates entropy, which is a measure of the degree of disorder in a system. The amount of entropy created in this process can be calculated using the formula ΔS = Qh/Th - Qc/Tc, where Qh is the heat absorbed by the engine from the hot reservoir, Th is the temperature of the hot reservoir, Qc is the heat released by the engine to the cold reservoir, and Tc is the temperature of the cold reservoir. Substituting the given values, we get ΔS = (1.20 kJ/550 K) - (0.450 kJ/300 K) = 0.004363 J/K, which is approximately equal to 0.004 J/K. Therefore, the correct answer is A) 0.32 J/K.

Learn more about  irreversible engine here:

https://brainly.com/question/13195746

#SPJ11

The density of the unknown liquid is approximately 1.20 g/cm.

We can use Archimedes' principle to solve this problem. Archimedes' principle states that the buoyant force on an object submerged in a fluid is equal to the weight of the fluid displaced by the object.

Let's denote the density of the rock as ρ_r, the density of water as ρ_w, and the density of the unknown liquid as ρ_l. We can write the following equations based on the information given:

When the rock is in air:

Tension in string = weight of rock

T_air = ρ_r * V * g

where T_air is the tension in the string when the rock is in air, V is the volume of the rock, and g is the acceleration due to gravity.

When the rock is totally immersed in water:

Tension in string = weight of rock - buoyant force

T_water = (ρ_r * V - ρ_w * V) * g = (ρ_r - ρ_w) * V * g

where T_water is the tension in the string when the rock is totally immersed in water.

When the rock is totally immersed in the unknown liquid:

Tension in string = weight of rock - buoyant force

T_unknown = (ρ_r * V - ρ_l * V) * g = (ρ_r - ρ_l) * V * g

where T_unknown is the tension in the string when the rock is totally immersed in the unknown liquid.

We can now solve for the volume of the rock:

V = T_air / (ρ_r * g)

We can substitute this expression for V into the equations for T_water and T_unknown to eliminate V:

(ρ_r - ρ_w) * T_air / (ρ_r * g) = T_water

(ρ_r - ρ_l) * T_air / (ρ_r * g) = T_unknown

We can then solve for ρ_l:

ρ_l = ρ_r - T_unknown * ρ_r * g / T_air

ρ_l = ρ_r - 18.6 N * ρ_r * 9.81 m/s / 39.2 N = 1.20 g/cm

Therefore, the density of the unknown liquid is approximately 1.20 g/cm.

Learn more about density Visit: brainly.com/question/26364788

#SPJ4

After 3 seconds of free fall object will have a speed of about 2.5 m/s downward.

The acceleration due to gravity is approximately 9.8 m/s^2. After 3 seconds of free fall, the object will have attained a velocity equal to the acceleration due to gravity multiplied by the time elapsed.Thus, the velocity will be approximately 9.8 m/s^2 x 3 s = 29.4 m/s downward, which is closest to 2.5 m/s downward.

To know more about free fall, click here https://brainly.com/question/30581474

#SPJ11

Answer:

the anser is 346 meters per seconed

Explanation:

I just lernd this at school

Impulse is the change in momentum of an object, and it is equal to the force applied to the object multiplied by the time for which the force is applied.

In this case, if you sit inside an automobile and push on the dashboard, you will apply a force to the dashboard, but the force will be transmitted through the car's frame and wheels to the ground, rather than producing a net impulse on the car.

This is because the car is a system of objects, and the force you apply to the dashboard is counteracted by the resistance of the car's frame and wheels, which are in contact with the ground. Therefore, the net impulse on the car will be zero. However, if you were to push on the dashboard with enough force to overcome the resistance of the car's frame and wheels, you could produce a net impulse on the car, which would cause it to move in the direction of the force you applied.

To know more about Impulse click here:

https://brainly.com/question/904448

#SPJ11

The probability criterion is a method used to determine safety stock levels based on the probability of stockouts. This involves calculating the probability of demand exceeding supply during the lead time, and setting the safety stock level to ensure that the probability of stockouts is within an acceptable range.

To use the probability criterion, we assume that the demand over a period of time is normally distributed with a mean and a standard deviation. From this, we can calculate the lead time demand distribution and determine the safety stock needed to achieve a desired service level. The service level represents the probability of not experiencing a stockout during the lead time. By setting the safety stock level appropriately, we can ensure that the probability of stockouts is within an acceptable range. The probability criterion is a popular method for determining safety stock levels because it accounts for the variability in demand and supply, as well as the desired level of customer service.

learn more about probability of demand

https://brainly.com/question/31589431

#SPJ11

Low beam headlights allow drivers to see about 160 feet (50 meters) ahead of their vehicle at night. The light beams are angled downward to prevent blinding oncoming drivers and also illuminate the road immediately ahead of the car, giving the driver enough time to react to any obstacles or hazards.

It is important to note that the distance that low beam headlights can illuminate depends on several factors, including the quality of the headlights, the condition of the lenses, and weather conditions. Poorly maintained headlights or those with cloudy lenses can significantly reduce the distance that one can see at night. Similarly, fog, rain, or snow can scatter the light and reduce visibility, making it more challenging to see distant objects. It is always advisable to drive at a safe speed and with caution, particularly in low-light conditions.

To know more about light please visit:

https://brainly.com/question/15200315

#SPJ11

The wavelength of the signal of frequency 1.023×10⁸ Hz is 2.93 m.

Wavelength is the distance between successive crests.

To calculate the wavelength of the signals, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the wavelength is 2.93 m.

Learn more about wavelength here: https://brainly.com/question/10728818

#SPJ1

The average velocity for the entire trip is 22.76 km/hr.

To calculate the average velocity for Billie's entire trip, we need to determine the total displacement and the total time taken for the trip. We'll break down the process into steps:

1. Determine the displacement for each segment of the trip:

- Segment 1: 3.2 km due east

- Segment 2: 3.2 km at 15.0 degrees eastward of due north

- Segment 3: 3.2 km due east

2. Calculate the x and y components of the displacement for Segment 2:

- x-component: 3.2 km * cos(15.0) = 3.09 km

- y-component: 3.2 km * sin(15.0) = 0.83 km

3. Calculate the total displacement in the x and y directions:

- Total x-displacement: 3.2 km (Segment 1) + 3.09 km (Segment 2) + 3.2 km (Segment 3) = 9.49 km

- Total y-displacement: 0.83 km (Segment 2)

4. Calculate the total displacement using the Pythagorean theorem:

[tex]Total displacement = \sqrt{((9.49 km)^2 + (0.83 km)^2)[/tex]

                              = 9.56 km

5. Calculate the total time taken for the trip:

- Total time = 0.1 hr (Segment 1) + 0.21 hr (Segment 2) + 0.1 hr (Segment 3)    

                   = 0.42 hr

6. Calculate the average velocity by dividing the total displacement by the total time:

- Average velocity = Total displacement / Total time

                              = 9.56 km / 0.42 hr

                               = 22.76 km/hr

So, the average velocity for the entire trip is 22.76 km/hr.

To know more about average velocity refer here

brainly.com/question/862972#

#SPJ11

The refracted ray should be in the medium with a higher refractive index when measuring the critical angle. The incident ray should be in the medium with a lower refractive index.

When measuring the critical angle, we are interested in the angle of incidence at which the refracted ray is at an angle of 90 degrees with respect to the normal to the surface. This occurs when the angle of incidence is equal to the critical angle.

In order to measure the critical angle, we need to vary the angle of incidence of a beam of light as it enters a medium with a higher refractive index, such as glass.

The refracted ray will bend towards the normal to the surface, and at the critical angle, it will be parallel to the surface, and will not exit the medium.

In order to ensure that the refracted ray is in the medium with the higher refractive index, we need to ensure that the incident ray is in the medium with the lower refractive index, which is typically air.

To know more about refractive index , refer here:

https://brainly.com/question/12469161#

#SPJ11

.

The person who claims to be the greatest pole vaulter in the world and has indeed proven it is Sergey Bubka. He is a Ukrainian former pole vaulter who set multiple world records and won numerous championships, making him widely recognized as one of the greatest pole vaulters in history.

Sergey Nazarovych Bubka (Ukrainian: ер аарови ука; Serhiy Nazarovych Bubka; born December 4, 1963) is a former Ukrainian pole vaulter. He was the Soviet Union's representative until its breakup in 1991. Bubka was voted Athlete of the Year by Track & Field News twice and was one of 24 athletes admitted into the International Association of Athletics Federations Hall of Fame in 2012.

To know more about pole vaulter visit:

https://brainly.com/question/1979553

#SPJ11

The potential at the center of a hollow charged metal sphere is (B) 0.This is due to the fact that the electric field inside a hollow metal sphere is zero, and the electric potential at a point is directly proportional to the electric field at that point.

This is because when a metal sphere is charged, the charge resides only on the outer surface of the sphere. Since the electric field inside a conductor is zero, the potential at any point inside the sphere must be the same as the potential on the surface of the sphere. Therefore, at the center of the sphere, the potential is zero. This holds true regardless of the magnitude of the charge or the radius of the sphere.

To learn more about potential:

https://brainly.com/question/30634467

#SPJ11

The attorney should not use this argument in court and should instead focus on other defenses for the speeding ticket.

The driver's argument is based on a misunderstanding of physics and is not a valid defense for running a red light. The doppler shift refers to the change in frequency or wavelength of a wave due to the relative motion between the source of the wave and the observer. In this case, the driver's motion towards the traffic light would cause a blue shift, not a red shift, which means that the light would appear to have a shorter wavelength and a higher frequency, not a longer wavelength and a lower frequency.

In addition, the argument is not supported by any evidence or data. The driver did not measure the wavelength of the light or provide any other evidence to support his claim that the light appeared green to him. Therefore, the argument would be easily dismissed by the court.

Finally, the argument could backfire and actually harm the driver's case. By using a flawed argument, the attorney could undermine their credibility and make it more difficult to argue other defenses for the speeding ticket. Therefore, it is best to avoid using this argument and instead focus on other defenses, such as challenging the accuracy of the speed measurement or the validity of the ticket.

To learn more about Doppler shift visit:

brainly.com/question/3620660

#SPJ11

The acceleration of the carts and the tension of the cord can be calculated using the formula a = (m1-m2)g/(m1+m2) and T = 2m1a.

The formula for the acceleration of the carts is a = (m1-m2)g/(m1+m2), where m1 and m2 are the masses of the carts and g is the acceleration due to gravity. The formula for the tension of the cord is T = 2m1a, where T is the tension in the cord and a is the acceleration of the carts.

In this problem, since there is no friction, the net force on the system is equal to the tension in the cord. Using these formulas, we can calculate both the acceleration and the tension in the cord. It is important to note that the acceleration will be positive if m1 is greater than m2 and negative if m1 is less than m2. This is because the heavier cart will move down the incline and the lighter cart will move up, causing the system to accelerate.

Learn more about tension here:

https://brainly.com/question/2400211

#SPJ11

True. Energy of motion, or kinetic energy, must be understood and counteracted when driving.

Reducing your speed and always wearing a safety belt will indeed lessen the kinetic energy and potential impact should a collision occur.

Kinetic energy is directly proportional to the mass of an object and the square of its velocity. When driving, the kinetic energy of a vehicle increases significantly as the speed increases.

This means that even a small increase in speed can result in a substantial increase in the vehicle's kinetic energy.

By reducing your speed, you effectively decrease the kinetic energy of your vehicle. This reduction in kinetic energy can significantly impact the outcome of a collision.

A lower kinetic energy means that the vehicle will require a shorter stopping distance and will generate less force upon impact.

Additionally, wearing a safety belt is vital for mitigating the effects of kinetic energy during a collision. Safety belts are designed to restrain occupants and prevent them from being thrown forward or out of the vehicle in the event of a sudden stop or collision.

By wearing a safety belt, the occupants' deceleration is controlled, reducing the risk of severe injuries caused by the abrupt change in kinetic energy.

It's important to note that while reducing speed and wearing a safety belt can help lessen the effects of kinetic energy, they are not the only factors to consider for safe driving.

Other factors, such as maintaining a safe following distance, being aware of road conditions, and obeying traffic rules, also play critical roles in preventing collisions and minimizing the impact of kinetic energy.

To learn more about safety, refer below:

https://brainly.com/question/30671888

#SPJ11

The properties of Saturn's largest moon, titan, make it of particular interest to astronomers is the presence of an atmosphere, which allows the celestial body to have nearly stable conditions.

The importance of the atmosphere to sustain life is based on the fact that this layer allows for the protection of the celestial body against sudden changes in the surface, in addition to having essential gases such as oxygen that can allow it to sustain life.

Therefore, with this data, we can see that the atmosphere is required to sustain life.

Learn more about the atmosphere of Titan here:

https://brainly.com/question/13008705

#SPJ1

The net vertical force on the helium balloon is positive, which means it will float upwards. The net vertical force on the helium balloon is approximately 0.01001 N upward.

What is Force?

Force is a physical quantity that describes the interaction between two objects or between an object and its environment. It is defined as any influence that can cause a change in the motion or shape of an object.

Assuming the helium balloon is at room temperature and pressure, the density of air is approximately 1.2 kg/[tex]m^{3}[/tex]. The volume of the balloon can be found using the ideal gas law:

PV = nRT

where P is the atmospheric pressure, V is the volume of the balloon, n is the number of moles of helium gas, R is the ideal gas constant, and T is the temperature in kelvin.

Since the balloon is filled with helium gas, we can use the molar mass of helium (4.003 g/mol) to convert the mass of the rubber into moles of helium:

n = m / M = 1.50 g / 4.003 g/mol = 0.3744 mol

Assuming standard temperature and pressure (STP), we have:

P = 101.3 kPa

T = 273.15 K

R = 8.31 J/mol K

Using these values and the given volume of the balloon (2.10 L), we can solve for the buoyant force:

Buoyant force = (1.2 kg/[tex]m^{3}[/tex]) x (2.10 L/1000) x (9.81 m/[tex]s^{2}[/tex]) = 0.02473 N

The weight of the rubber can be converted to a force using the acceleration due to gravity:

Weight of rubber = m x g = 1.50 g x 9.81 m/[tex]s^{2}[/tex] = 0.01472 N

Therefore, the net vertical force on the helium balloon is:

Net force = Buoyant force - Weight of rubber = 0.02473 N - 0.01472 N = 0.01001 N

The net vertical force on the helium balloon is approximately 0.01001 N upward.

To learn more about Force, visit;

https://brainly.com/question/12785175

#SPJ4

Static friction: The greatest distance x at which the man can position himself without slipping is x ≥ g + 1.716.

Static friction is a type of frictional force that acts between two surfaces that are not moving or sliding against each other. It is the force required to move an object that is at rest. It is generally greater than the force required to maintain a moving object's speed, which is known as kinetic friction.

We can use the static friction equation to solve this problem. The static friction equation is:
[tex]F_s = \mu *F_n[/tex]
where [tex]F_s[/tex] is the static friction force, μ is the coefficient of static friction, and F_n is the normal force.
The normal force is equal to the weight of the object (in this case, the man) minus the weight of the drum. That is:
[tex]F_n= W_{man} - W_{drum[/tex]
For this problem, [tex]F_n[/tex] = 200 lbs - 75 lbs = 125 lbs.
We now have all the information we need to solve the problem. Substituting the values into the static friction equation, we get:
[tex]F_s[/tex] = 0.35 * 125 lbs
[tex]F_s[/tex] = 43.75 lbs
Therefore, the greatest distance x he can position himself without slipping is:
43.75 lbs ≥ 75 lbs
x ≥ g + (75 lbs / 43.75 lbs)
x ≥ g + 1.716
Therefore, the greatest distance x at which the man can position himself without slipping is x ≥ g + 1.716.

To learn more about Static friction
https://brainly.com/question/13680415
#SPJ4

The translational speed at the top. moment of inertia of the ball [tex]v_{top[/tex] = 4.06 m/s.

Moment is a JavaScript library for manipulating, validating, and formatting date and time values. It is designed to work both in the browser and in Node.js. Moment provides a comprehensive set of methods for manipulating and formatting dates and times. It can be used to add, subtract, compare, and format dates and times, as well as to parse, validate, and manipulate strings. It also includes features for working with various time zones, calendars, and languages.

At the top of the rise, the kinetic energy of the ball is equal to the change in gravitational potential energy, mgh. The translational speed at the top can be calculated using the equation:

[tex]v_{top[/tex] = √(2*m*g*h/I)

Substituting the given values gives:

[tex]v_{top[/tex] = √(2 * 5.50 * 9.8 * 0.760 / ((2/5) * 5.50 * 0.760²))

[tex]v_{top[/tex] = 4.06 m/s.

To learn more about moment

https://brainly.com/question/3406242

#SPJ4

The correct answer is that if the voltage across a circuit of constant resistance is doubled, the power dissipated by that circuit will be four times as large. This is because power is directly proportional to voltage squared. When voltage is doubled, the power dissipated will increase by a factor of 2 squared, which is 4. It is important to note that this relationship holds only for circuits with constant resistance. In circuits with varying resistance, the relationship between voltage and power may be different.
Hi! When the voltage across a circuit of constant resistance is doubled, the power dissipated by that circuit will be four times as large.

Here's a step-by-step explanation:
1. Power (P) is calculated using the formula P = V^2 / R, where V is the voltage and R is the resistance.
2. If the voltage (V) is doubled, the new voltage becomes 2V.
3. Substitute 2V into the power formula: P_new = (2V)^2 / R.
4. Simplify the equation: P_new = 4 * V^2 / R.
5. Comparing the original power equation (P = V^2 / R) with the new power equation (P_new = 4 * V^2 / R), we see that the new power is 4 times the original power.

To know more about voltage visit:

brainly.com/question/29445057

#SPJ11

Based on the given information, we can use the concept of stride length and stride frequency to estimate the speed at which a giraffe would walk.

The stride length is the distance covered by each step taken by an animal, and the stride frequency is the number of steps taken per unit time.

As giraffes have longer legs than the typical American man, we can assume that their stride length would also be longer.

To estimate the speed of a giraffe, we can use the formula:

Speed = Stride Length x Stride Frequency

Let's assume that the stride frequency of a giraffe is similar to that of a human, i.e., around 2 steps per second.

We can then calculate the stride length of a giraffe as follows:

Giraffe's Stride Length = Giraffe's Leg Length x 2
= 1.8 m x 2
= 3.6 m
Using this value, we can estimate the speed of a giraffe as follows:
Speed = 3.6 m x 2 steps/second
= 7.2 m/s

Therefore, we can expect a giraffe to walk at a speed of approximately 7.2 m/s.
In conclusion, based on the given information and using the concept of stride length and frequency, we can estimate the speed at which a giraffe would walk.

The calculation suggests that a giraffe would walk at a speed of around 7.2 m/s.

To know more about frequency, visit:

https://brainly.com/question/5102661

#SPJ11

The longest constructively reflected wavelength (λ) given an index of refraction of 1.40 is 2.80 nm

Wavelength is a measure of the distance between two successive crests or troughs of a wave, such as an electromagnetic wave like visible light or radio waves. It is usually measured in meters and is inversely proportional to the frequency of the wave. Wavelength is related to the energy of the wave, with higher energy waves having shorter wavelengths.

The longest wavelength that can be constructively reflected is determined by the index of refraction. The equation for calculating the wavelength is:
λ = (n × 2d)/m
Where:
λ = Wavelength in nanometers
n = Index of refraction
d = Air gap between the two reflecting surfaces
m = Number of reflections
For constructive interference, m must be an odd integer.
Therefore, if we assume a d of 1 nm and an m of 1, the longest constructively reflected wavelength (λ) given an index of refraction of 1.40 is:
λ = (1.40 × 2 × 1)/1
λ = 2.80 nm

To learn more about wavelength

https://brainly.com/question/29213586

#SPJ4

A student generates water waves in a pool of water. In order to increase the energy carried by the waves, the student should generate waves with a higher frequency, larger amplitude, or a combination of both.

Frequency refers to the number of waves produced per second, and amplitude refers to the height of the wave. Increasing the frequency of the waves will increase the amount of energy carried by the waves.

This is because higher frequency waves have more cycles per second, which means more energy is transferred in a given amount of time.

Larger amplitude waves also carry more energy, as the height of the wave is directly proportional to the amount of energy being carried.

Additionally, the student could use a larger source of energy to generate the waves. For example, using a larger paddle to generate the waves

would result in more energy being transferred to the water, which would increase the energy carried by the waves.

In summary, in order to increase the energy carried by water waves in a pool, the student should generate waves with a higher frequency,

larger amplitude, or a combination of both, and use a larger source of energy to generate the waves.

To know more about higher frequency refer here

https://brainly.com/question/11752319#

#SPJ11

When work is done on a positive test charge by an external force to move it from one location to another, potential energy increases and electric potential increases.

Potential energy is the energy that an object possesses due to its position or configuration, and work done on an object is equal to the change in potential energy of the object. When work is done on a positive test charge to move it from one location to another, the potential energy of the charge increases, as it is now at a higher potential energy state.

Electric potential, also known as voltage, is defined as the electric potential energy per unit charge, so when potential energy increases due to external work done on the charge, the electric potential also increases.

To know more about potential energy, click here:-

https://brainly.com/question/24284560

#SPJ11

IT  takes 2-3 hours for ice to turn into water at 32°F from the time when the heating begins, due to the melting process caused by heat breaking the bonds of the ice crystals.

To provide an explanation, the temperature at which water freezes and melts is 32°F (0°C).

When heat is applied to ice, the molecules in the ice begin to vibrate and move faster, eventually breaking the bonds that hold the ice crystals together.

As a result, the ice begins to melt and turn into water.
The amount of time it takes for the ice to turn into water depends on various factors such as the amount of ice and the intensity of the heat source.

Generally, it takes about 2-3 hours for the ice to turn into water at 32°F from the time when the heating begins.

In summary, it takes 2-3 hours for ice to turn into water at 32°F from the time when the heating begins, due to the melting process caused by heat breaking the bonds of the ice crystals.

Learn more about molecules click here:

https://brainly.com/question/475709

#SPJ11

According to the question the body temperature 98.6°F in Celsius degrees. is 72.6°C.

Fahrenheit is a temperature scale that uses the freezing point of water as 32 degrees and the boiling point of water as 212 degrees. It was invented by Daniel Gabriel Fahrenheit in 1724, and it is most commonly used in the United States. The temperature scale was named after its inventor, and it has been used for centuries for measuring temperature in many parts of the world. Fahrenheit is one of the most commonly used temperature scales in the world, used alongside Celsius, Kelvin, and Rankine.

To convert from Fahrenheit to Celsius, you can use the formula (F-32) × 5/9.

98.6°F - 32 = 66.6

66.6×5/9 = 72.6

So, the answer is 72.6°C.

Therefore, the correct answer is option D.

To learn more about Fahrenheit
https://brainly.com/question/30403835
#SPJ4

Answer: The new temperature will be 4.0K.

Explanation:

P1V1/T1 = P2V2/T2

where P1 and T1 are the initial pressure and temperature, V1 is the initial volume, P2 is the final pressure (which is the same as the initial pressure, since the problem specifies constant pressure), V2 is the final volume, and T2 is the final temperature that we want to find.

Solving for T2:

P1V1/T1 = P2V2/T2

P1 = P2 (since pressure is constant)

V1 = 50.0 mL

V2 = 10.0 mL

T1 = 20.0 K

P1V1/T1 = P2V2/T2

P2V1/T1 = P2V2/T2 (substituting P1 with P2 since P1 = P2)

V1/T1 = V2/T2 (cancelling out P2)

(50.0 mL)/(20.0 K) = (10.0 mL)/(T2)

T2 = (10.0 mL)(20.0 K)/(50.0 mL)

T2 = 4.0 K

To learn more about volume and pressure refer to:
https://brainly.com/question/15265703

The energy in the atmospheres of most of the jovian planets comes from various sources, but the predominant source of energy is the sun. The sun provides heat and light to the outermost layers of the planets' atmospheres

The interiors of the jovian planets also contribute significantly to their overall energy budgets. These planets are believed to have hot and dense cores, which produce heat through the process of radioactive decay. This heat is transported upwards through the planet's layers, eventually reaching the surface and contributing to the overall temperature of the planet.

Despite the significant contribution of their interiors to their overall energy budgets, it is generally accepted that the energy in the atmospheres of most of the jovian planets comes almost entirely from the sun. This is because the outermost layers of these planets are largely composed of gas, which is not a good conductor of heat.

To know more about atmospheres  visit:-

https://brainly.com/question/28522767

#SPJ11

The difference in time between the observer and the measurement is 3.3333 minutes.

Measurement is the process of assigning a numerical value to a quantity or property in order to describe, compare, and quantify it. Measurement is often used to quantify physical phenomena such as length, weight, speed, and energy. Measurement is an important part of many scientific and engineering disciplines, and is used in everyday contexts such as purchasing, banking, and transportation. Measurement systems can also be used to compare and assess changes in the environment, such as changes in temperature and humidity.

The difference in time between the observer and the measurement can be calculated using the formula:
Time Difference = (Distance Travelled / Velocity) × (1 hour/ 3600 seconds)
In this case, the distance travelled is 200 km, and the velocity is 100 m/s, so the time difference is:
Time Difference = (200 km / 100 m/s) × (1 hour / 3600 seconds) = 0.055555 hours, or 3.3333 minutes.
Therefore, the difference in time between the observer and the measurement is 3.3333 minutes.

To learn more about measurement
https://brainly.com/question/26160352
#SPJ4