The biome which comprises most of Antarctica is the cold desert or polar desert.
What is a Biome?This is defined as an area which is classified according to the species that live there.
The climate of Antarctica is very cold with very little life forms which is why it is referred to as a cold desert or polar desert.
Read more about Biome here https://brainly.com/question/2142181
Is Iron rusting a physical, or chemical change?
Answer:
the answer is chemical change because the act of rusting changes the substance of iron
Explanation:
help me with this pleaseeeeeee
Magnesium oxide is an ionic compound with a very high melting point and which requires a large amount of energy for melting.
What are ionic compounds?Ionic compounds are compounds which are formed between oppositely charged ions which are held together by electrostatic forces of attraction between the oppositely charged ions.
Ionic compounds are formed when metal atoms donate electrons to non-metals atoms to form ions.
Magnesium oxide is an ionic compound.
The nature of bonding is ionic bonding.
It has a crystalline lattice structure.
The forces of attraction is electrostatic forces of attraction.
It has a high melting point of 2,852 °C, and thus requires a large amount of energy go melting to occur.
Therefore, magnesium oxide is an ionic compound which requires a large amount of energy for melting.
Learn more about ionic compounds at: https://brainly.com/question/11638999
1. In sheep, a gene with two alleles decides wool color. The allele for white wool is
dominant to the allele for black wool. If two heterozygous sheep mate, what
percentage of the sheep will have white wool? Record your answer as a
percent.
White wool
Black wool
HINT: Create a Punnett square on scratch paper to determine the answer.
This is defined as a variant form of a gene. We were told that allele for white wool is dominant to the allele for black wool and two heterozygous sheep mated.
When we cross Ww and Ww we get WW, Ww, Ww, ww. Since white is dominant then the percentage is 3/4 = 75 percent.
Read more about Allele here https://brainly.com/question/3452155
At what age did Lavoisier die?
Answer:
50 years old
Explanation:
Antoine Lavoisier died by the guillotine at the age of 50 on May 8, 1794 in Paris.
Hope this helps...
- profparis
Answer:
Antoine Lavoisier died at the age of 50
A person sitting in a rolling chair at rest throws a basketball forward. Since the person and the rolling chair have a greater mass than the basketball, how will the person and the rolling chair respond?
They will have the same forward momentum as the basketball.
They will move backward at a lower speed than the basketball moves forward.
They will move backward at a higher speed than the basketball moves forward.
They will travel the same distance as the basketball travels but in the opposite direction
They will move backward at a lower speed than the basketball moves forward.
Conservation of linear momentumThe principle of conservation of linear momentum states that the sum of the initial momentum is equal to sum of final momentum.
Initial momentum = Final momentum
The forward momentum of the basketball = Backward momentum of the person and the chair
Since the mass of the person and the chair is greater than the mass of the basketball, the person and the rolling chair will move backward at a lower speed than the basketball moves forward.
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
Calculate: Describe the RGB value and color you would obtain with each combination described below. Use the Gizmo to check your answers.
RGB value Color
Yellow (255, 255, 0) and blue (0, 0, 255) ______________ ______________
Plum (120, 0, 120) and dark green (0, 120, 0) ______________ ______________
Teal (0, 90, 90) and bronze (185, 150, 0) ______________ ______________
In the RGB color model, each color is represented by a numerical code that is written in parentheses and separated by commas.
What is the RGB model?RGB is a color model with which it is possible to represent a color by mixing by adding the three primary colors of light.
A special feature of this model is that it is not a reference point for defining the color red, green, or blue because the same RGB values can display noticeably different colors on different devices.
To form a color, it must be taken into account that in the RGB model the incidence of each color (red, green or blue) is measured on a scale that goes from 0 to 255.
These values are represented in parentheses, separated by commas as shown in the image below:
Learn more about RGB in: https://brainly.com/question/19262252
An impure sample of potassium hydrogen phthalate was titrated to determine the percent composition KHP. What is the percentage of potassium hydrogen phthalate if 2.81 g of the mixture required 35.61 mL of 0.152 mol/L NaOH to reach the end point
For an impure sample of potassium hydrogen phthalate, the percentage of potassium hydrogen phthalate is
m'=39.3%
What is the percentage of potassium hydrogen phthalate if 2.81 g of the mixture required 35.61 mL of 0.152 mol/L NaOH to reach the end point?Generally, the equation for the mol base is mathematically given as
mol base = M*V
mol base = 0.152*35.61
mol base = 5.41272 mmol
In conclusion
mass = mmol/1000*MW
m== 5.41272 /1000*204.22
m= 1.1053 g of KHP
Hence, m'=39.3%
Read more about Chemical reaction
https://brainly.com/question/16416932
A(n) reaction is a self-sustaining series of chemical reactions in which the products of one reaction are the reactants in the next reaction.
The reaction which is a self-sustaining series of chemical reactions in which the products of one reaction are the reactants in the next reaction is chain reactions.
What are reactants and products?Reactants are those species which are present at the initial state of the reaction and at the end of the reaction we obtain products.
If in any chemical reactions, reactants are combined for the formation of products and for the further process obtained product will act as reactant and that chemical reactions are known as chain reactions. Because this process continues for long time.
Hence correct option is chain reactions.
To know more about chain reactions, visit the below link:
https://brainly.com/question/1358923
Answer:
chain
Explanation:
edge 2023
How can you get a real gas to behave like the LEAST like an ideal gas (minimize attraction between particles)?
A real gas behaves least like an ideal gas under the conditions of low temperature and high pressure.
This is because at low temperature and high pressure molecules of gas will have negligible kinetic energy and strong force of attraction. Thus, real gas will not behave like an ideal gas.
Whereas at high temperature and low pressure a real gas will behave like an ideal gas.
Answer: No real gas is ideal. All molecules have a volume and intermolecular forces of attraction. So a "real molar volume" is different from an ideal molar volume.
Explanation: I hope this help
Does gravity give objects their mass
Answer:
No
Explanation:
Mass affects the amount of gravity that acts on an object.
Answer:
Mass is determined by the quantity of matter in a physical object.
Mass is how much space something takes up, while weight is how much an object is acted on by a force because of gravity.
Explanation:
Gravity does not determine the mass of an object. For example, an object on the Moon would weigh less than it does on Earth because of the lower gravity, but it would still have the same mass. This is because weight is a force, while mass is the property that determines the strength of this force.
Which of the following is a reasonable explanation for the effect that stirring or agitation has on the dissolution rate?
A.
The water molecules have more kinetic energy and have a greater chance of interacting with (and dissolving) the potassium iodide.
B.
The water molecules have an increased charge, since stirring removes electrons from the molecules. This increases the chance of a potassium ion being attracted to water.
C.
Stirring converts large amounts of energy into heat from friction and the heat increases the dissolution rate.
D.
Stirring breaks the bonds between water molecules so that they are free to bond with the potassium and iodine ions.
The water molecules have more kinetic energy and have a greater chance of interacting with (and dissolving) the potassium iodide.
What is the effect of stirring on the dissolution rate?Stirring breaks a solute into smaller pieces which increases its surface area as well as its rate of dissolution. Stirring brings unused portions of the solvent in contact with the solute which allows the solute to dissolve faster.
So we can conclude that option A is the right answer.
Learn more about dissolution here: https://brainly.com/question/4529762
what is ozen. gas? How is it formed?
[tex]\sf\huge\underline\purple{Ozone\: Gas:-}[/tex]
Ozone, O3, an unstable, blue, diamagnetic gas with a characteristic pungent odor, protects the earth and its inhabitants from intense ultraviolet radiation from the sun.[tex]\rightarrow[/tex]Ozone is an allotropic molecular form of oxygen containing three atoms of oxygen (O3). Ozone O3 is generated through the passage of oxygen O2 through a high voltage potential resulting in the attachment and formation of a third oxygen atom.
[tex]\rightarrow[/tex]The molecular formula for ozone (O3) was established by Soret (1863) by taking the ratio of the change in volumes when O3/O2 mixtures were either heated or exposed to turpentine and cinnamon oil.
Formation:-[tex]\rightarrow[/tex]Ozone is formed when heat and sunlight cause chemical reactions between oxides of nitrogen (NOX ) and Volatile Organic Compounds (VOC), which are also known as Hydrocarbons. This reaction can occur both near the ground and high in the atmosphere.
__________________________________
Hope it helps you:)
Contrast (Compare) the Sun's gravitational pull on Earth when Earth is
closest to the Sun and when Earth is farthest from the sun.
Answer:
gravity equation.
Explanation:
use this gravity equation
F= G(m1*m2/d²)
What volume of water is used to prepare a 3.5 M solution if 45 grams of Na2CO3 is used?
Answer:
121.3 ml
Explanation:
Mole wts
Na 22.989 x 2
C 12.011
O 15.999 x 3 total = 105.986
45 grams is 45/105.986 of a mole
45/105.986 in one liter would be .424584 M
.424585 mole / x liter = 3.5
x = .1213 liter = 121.3 ml
what are the products for the following equation?
ZnBr2 + F2 ->
Answer:
The products to ZnBr2 + F2 -> Znf + Br2
When we balance this equation we get the following:
2ZnBr2 + F2 -> 2Znf + 2Br2
Hope this helps !!!
How many moles of lead chloride pbCl2, will be produced if 10.0 moles of Orion chloride FeCl33 reacted
Answer:
0.72 moles of hydrochloric acid are needed to completely react with 0.36 mol of lead.
Explanation:
I hope this helps you! :)
Anyone know this? Cuz I don’t this one is
Answer:
its legislative.
Distinguish between single and double replacement reactions and give an example of
each.
Answer:
i think this is right!
Explanation:
An example of a single replacement reaction occurs when potassium (K) reacts with water (H2O). A colorless solid compound named potassium hydroxide (KOH) forms, and hydrogen gas (H2) is set free. The equation for the reaction is: 2K + 2H2O → 2KOH + H.
An example of a double replacement reaction is the reaction between silver nitrate and sodium chloride in water. Both silver nitrate and sodium chloride are ionic compounds. Both reactants dissolve into their ions in aqueous solution.
What are the forms of energy that are transfer from the abiotic factors to the biotic factors and back to the abiotic factors of an ecosystem
Answer:
sunlight, light energy from the sun
Explanation:
energy is transferred from the sun to plants then animal's eat plants
How many moles of water (H20) are produced when 2 moles of KMnO, react with plenty of HCI? Show work if can will give most points :) !!
I hope this helps, you can ask any questions for clarification
Need help! Will give brainliest & 50 points.
What happens to iron when it reacts with acid?
Answer:
Iron will disolve in acid. The acid eats away at the iron. :)
Have an amazing day!!
Please rate and mark brainliest!!
Name and Describe two properties of water that’s important to life on earth
"The Univeral Solvent"
- Water is known to be the universal solvent because of its ability to dissolve more particles than any other liquid.
Cohesion- Cohesion is the property of water to attract other molecules. This helps in making solutions that are essential for most life to propagate.
#learnwithbrainly
Predict the sign of delta H for a combustion reaction and suggest whether it is likely to be spontaneous or not.
A) + and spontaneous
B) + and uncertain
C) - and spontaneous
D) - and uncertain
What's a combustion
It means hydrocarbon burns in presence of excess oxygen to produce carbon dioxide and heat
Hence it's exothermic∆H=+veAs solid state is converted to gaseous so randomness increases hence it's spontaneous
Combustion is the process of combining with oxygen to form water and carbon dioxide. It is an exothermic reaction and will release energy. Thus delta H for combustion is negative.
What is enthalpy change ?Enthalpy change of reaction is the change in heat absorbed or released by a reaction. If heat is absorbed by the system , the reaction is called endothermic and the change in enthalpy delta H is positive.
For a reaction which release energy, the change in enthalpy delta H will be negative and thus the reaction is said to be exothermic. Combustion is an exothermic reaction.
During combustion new bonds are formed between carbon and oxygen and carbon and hydrogen. Thus bond making is happend more than bond breaking. Bond breaking needs much energy than bond making.
Hence, the released energy is more form combustion and enthalpy change is negative. The process needs no more energy thus the reaction is spontaneous. Thus option C is correct.
To find more about enthalpy change, refer the link below:
https://brainly.com/question/4526346
#SPJ2
Please, I need this now.
Drag each label to the correct location on the image.
Match each situation to the circuit diagram that represents it.
Answer: if anyone needs it <3
Explanation:
what mass of CO2 gas occupies 6.7L at 2 atm and 245k
help I would really appreciate it tyy!!
Answer:
This image attached should help:
Explanation:
The reason that food web contains all organisms is because it shows every relationship, where food chain shows a more basic one. And the reason that they both have producers, consumers, and decomposers, is because they bothat least highlight a part of the almost every aspect, although it leans more to food web.
here's the answer to the question in the image, I couldn't comment on the right question because a bot already did.
1. ant, love
active
2. dog, man
dormant
3. bug, ring
burning
4. dress, up
pressure
5. think, tiger
trinker
Which of the following helps explain why experiments involving speed and velocity are important? (1 point)
Experiments involving speed and velocity are important because they have not been investigated much and scientists still do not fully understand how speed and velocity are related
Experiments involving speed and velocity are not important because they have already been thoroughly investigated by scientists and there is nothing more to learn.
Repeated experiments with airplanes and how their velocity changes as a result of environmental conditions like wind can help scientists develop a model for flight paths and launch times to
minimize fuel usage
O Repeated experiments that change motivational foods for tortoises on tracks can help scientists determine preferred eating habits
The statement that explain the important of experiment with speed and time is
Repeated experiments with airplanes and how their velocity changes as a result of environmental conditions like wind can help scientists develop a model for flight paths and launch times to minimize fuel usage.
What is an experiment?An experiment is a scientific procedure or technique carried out in a place to discover or test the validity of something.
Velocity refer to the rate of change of body's position and direction in respect to time.
Speed is the distance travel by an object in respect to time.
Therefore, The statement that explain the important of experiment with speed and time is
Repeated experiments with airplanes and how their velocity changes as a result of environmental conditions like wind can help scientists develop a model for flight paths and launch times to minimize fuel usage.
Learn more about experiment below.
https://brainly.com/question/25303029
Pots A and B both have plain soil, bean seeds, and the same amount of light. Pot B receives more water (see table). After 50 days the plants are measured. Based on the data, which of the following conclusions can NOT be drawn from the data table?
A plant that receives more water will have more mass
The amount of water a plant receives affects its growth
The taller a plant is, the more mass it has
A plant that receives more water will grow t
A. water per day: 20 m/ height: 24cm/ mass: 3.1g B. Water per day: 60 ml/ height: 24cm/ mass: 9.6g
I think that the answer to this question is the third option. These two plants are of the same height but plant B has more mass. So therefore the statement is not true.
If this is a multiple-choice, then I would also select the fourth option along with the third. Plant B received more water, but it is the same height as plant A.
I hope my answer is satisfactory, and that I was of help to you.
-Toremi
Question 6 of 10
What does it mean when a reaction is spontaneous?
O
A. The reaction requires added energy.
B. The reaction goes to completion.
C. The reaction occurs rapidly.
O O
D. The reaction happens by itself.
SUBMIT
Answer:
D
Explanation:
Does not require energy ...may be slow or fast....
two protons are placed 1 mm apart. separately two electrons are placed 1 cm apart. which pair will have greater force between them
Answer:
The protons
Explanation:
The force of attraction/repulsion is indirectly proportional to the square of the distance between...the protons are much closer together and will have a stronger force.
F = k q1q2 / r^2
