In a buffer solution made of acetic acid and sodium acetate, any acid that is added will react with:
Select the correct answer below:
hydronium
hydroxide
acetic acid
acetate

To build a simple filtration apparatus, you will need the following materials:

Steps to build a simple filtration apparatus:

1. Choose a funnel that fits securely on top of the beaker or flask.

2. Fold a filter paper in half and then in half again to create a cone shape that fits inside the funnel.

3. Place the folded filter paper in the funnel, making sure that the paper touches the sides of the funnel to create a seal.

4. Wet the filter paper with a small amount of the solvent that will be used to filter the material.

5. Place the funnel on top of the beaker or flask, making sure that the funnel is centered and level.

6. Pour the material to be filtered onto the filter paper in the funnel.

7. Allow the solvent to pass through the filter paper, carrying the desired particles with it, and collecting in the beaker or flask below.

8. Dispose of the filter paper and collected material appropriately.

Note: The size and shape of the funnel, filter paper, and container may vary depending on the amount and nature of the material being filtered.

To know more about filtration apparatus, please click on:

https://brainly.com/question/5106546

#SPJ11

The temperature of the nitrogen molecules in the given volume is 126.4 K.

To solve this problem, we can use the ideal gas law:

PV = nRT

where P is the pressure of the gas, V is its volume, n is the amount of gas in moles, R is the gas constant, and T is the temperature in Kelvin.

We are given P, V, and n, so we can rearrange the ideal gas law to solve for T:

T = PV / nR

Substituting the given values, we get:

T = (3.0 atm) × ([tex]8.1 m^3[/tex]) / (1900 mol × 8.314 J/(mol*K))

T = 126.4 K

To know more about nitrogen molecules, here

brainly.com/question/24145107

#SPJ1

The equation which represents an acid-base or a buffer solution is represented below-

pH = pKₐ + log([A⁻]/[HA])

One way to determine the pH of a buffer is by using the Henderson–Hasselbalch equation, which is

pH = pKₐ + log([A⁻]/[HA])

In the above equation, [HA] and [A⁻] refer to the equilibrium concentrations of the conjugate acid–base pair used to create the buffer solution. For the titration of a weak acid with a strong base, the pH curve is initially acidic and has a basic equivalence point (pH > 7). The section of curve between the initial point and the equivalence point is known as the buffer region.

To learn more about pH check the link below-

https://brainly.com/question/26424076

#SPJ4

The amount of the radioactive isotope remaining after 16 days is 2.5 mg

The amount of the radioactive isotope remaining after 16 days can be calculated using the formula:

A = a*(1/2)^(t/h)

where A is the amount remaining, a is the initial amount, t is the time elapsed, and h is the half-life of the substance.

In this case, we have an initial amount of 10 mg and a half-life of 8 days. Therefore, we can plug in these values into the formula to get:

A = 10*(1/2)^(16/8)
A = 10*(1/2)^2
A = 10*(1/4)
A = 2.5 mg

So, after 16 days, only 2.5 mg of the radioactive isotope remains.

Thus, the amount of the radioactive isotope remaining after 16 days is 2.5 mg.

To know more about radioactive isotope, click here

https://brainly.com/question/28039996

#SPJ11

For lower specific heat capacity gasoline feel cooler on your skin than [tex]H_2O[/tex]

Gasoline has a lower specific heat capacity than water. Specific heat capacity is the quantity of heat required to raise the temperature of a substance by one degree Celsius. So,Gasoline feels cooler on our skin than water. Water has a high specific heat capacity . So,it requires more heat to increase its temperature than gasoline.

When we touch gasoline which absorbs the heat from our skin more quickly than water would which makes it feel cooler to the touch.

Learn more about gasoline here,

https://brainly.com/question/24353331

#SPJ4

When one equivalent of HBr reacts with the given compound, two different products can be formed: kinetic and thermodynamic.The kinetic product is formed through the faster reaction pathway, which usually involves a lower activation energy.

In this case, the kinetic product is formed by adding the HBr molecule to the more substituted carbon of the double bond. This results in a more stable intermediate, which can then form the kinetic product through proton transfer. The kinetic product is shown below:
[Insert image of kinetic product].The thermodynamic product is formed through the slower reaction pathway, which usually involves a higher activation energy.

In this case, the thermodynamic product is formed by adding the HBr molecule to the less substituted carbon of the double bond.This results in a less stable intermediate, which can then form the thermodynamic product through proton transfer. The thermodynamic product is shown below:[Insert image of thermodynamic product]

To know more about compound  visit:

https://brainly.com/question/23334479
#SPJ11

The anion present in the aqueous solution of [tex]Cu(C_2H_3O_2)_2[/tex] is [tex]C_2H_3O^{2-[/tex].

Anion is an atom or group of atoms that has gained one or more electrons, giving it a net negative charge. Anions are formed when an atom gains electrons due to an imbalance in the atom’s outermost electron shell. By gaining electrons, the atom becomes more stable and is able to bond with other atoms. These bonds form molecules and compounds.

This is because the compound [tex]Cu(C_2H3O_2)_2[/tex] is a salt composed of positively charged Cu²⁺ ions and negatively charged [tex]C_2H_3O^{2-[/tex] ions. Since the compound dissolves in water, the ions separate from each other and the [tex]C_2H_3O^{2-[/tex] anion remains in the aqueous solution.

To learn more about anion

https://brainly.com/question/14309645

#SPJ4

The answer is c. 3. Sodium borohydride (NaBH4) is a strong reducing agent that can reduce aldehydes and ketones to their corresponding alcohols.

Borohydride is an inorganic compound that is composed of boron and hydrogen. It is a type of hydride, which is a compound that contains hydrogen and a metal or metalloid. Borohydride has a number of commercial and industrial uses, such as in the production of fuel cells, biodegradable detergents, and pharmaceuticals. It is also used as a reducing agent in the synthesis of organic compounds. Borohydride can be produced through a variety of methods, such as electrochemical reduction and thermal decomposition. Borohydride is a strong reducing agent, and its use as a reagent in organic synthesis has been increasing over the past few years due to its ease of use, low cost, and high reactivity.

For each mole of NaBH4, three moles of ketone can be reduced.

Therefore the correct option is C.

To learn more about borohydride

https://brainly.com/question/31321350

#SPJ4

The exact amounts of HCOOH and HCOONa needed depend on the desired pH and the buffer capacity of the solution.

A buffer solution is prepared by mixing a weak acid (HCOOH) and its conjugate base (HCOONa).

To determine the specific amounts of each component needed, you should use the Henderson-Hasselbalch equation: pH = pKa + log ([A-]/[HA]), where [A-] is the concentration of the conjugate base (HCOONa) and [HA] is the concentration of the weak acid (HCOOH).

Knowing the desired pH and the pKa of formic acid (approximately 3.75), you can calculate the ratio of [A-] to [HA]. Then, adjust the concentrations accordingly to achieve a total volume of approximately 1 liter.

Summary: The required amounts of HCOOH and HCOONa to make a liter of buffer depend on the desired pH and buffer capacity. Utilize the Henderson-Hasselbalch equation to determine the correct ratio and concentrations of each component.

Learn more about Henderson-Hasselbalch equation click here:

https://brainly.com/question/13423434

#SPJ11

The product so formed for the given chemical reaction is  C₆H₅CH₂COCl.

When phenylacetic acid (C₆H₅CH₂COOH) is treated with SOCl₂, it results into  phenylacetyl chloride.

The chemical reaction is depicted as follows-

C₆H₅CH₂COOH + SOCl₂ → C₆H₅CH₂COCl

An acyl chloride (or acid chloride) is an organic compound with the functional group −C(=O)Cl. Their formula is usually written R−COCl, where R is a side chain. They are reactive derivatives of carboxylic acids (R−C(=O)OH). A specific example of an acyl chloride is acetyl chloride, CH₃COCl. Acyl chlorides are the most important subset of acyl halides.

To learn more about carboxylic acids  check the link below-

https://brainly.com/question/26855500

#SPJ4

In the context of geometric random variables, the letter "N" usually stands for the number of trials required to obtain the first success in a sequence of independent Bernoulli trials with a fixed probability of success, denoted by "p".

A geometric random variable models the probability distribution of the number of failures that occur before the first success in a sequence of independent trials, each with a probability of success "p". The number of trials required to obtain the first success is a random variable that follows a geometric distribution. The probability mass function of a geometric random variable N is given by P(N = k) = (1 - p)^(k-1) * p, where k is the number of trials required to obtain the first success. The expected value of a geometric random variable is E[N] = 1/p.

The geometric distribution is commonly used in various fields, such as reliability analysis, queueing theory, and statistical inference.

To learn more about Probability click here

https://brainly.com/question/30034780

#SPJ11

Value of units consumed at a total utility of 75 with given marginal utility and total utility values is 22,655.

What is the value of units consumed at a total utility of 75 with given marginal utility and total utility values?

The value that goes in the blank (A) is 55.

This is because the total utility increases from 40 to 75 as the units of good consumed increase from 12,345 to 15,000, which means that the additional utility gained from consuming the last 2,655 units of the good is 35 utils. Therefore, the marginal utility of the good is 35 utils divided by the number of additional units consumed, which is 2,655 - 12,345 = 10,310 units.

So, Marginal Utility (MU) = Additional Utility / Additional Units Consumed

MU = 35 / 10,310 = 0.00339 utils per unit

To find the point where the total utility reaches 75, we can use the following equation:

Total Utility = Total Utility at (A) + Additional Utility

75 = 40 + Additional Utility

Additional Utility = 35

We already know that the marginal utility is 0.00339 utils per unit, so we can use that to find the additional units consumed to reach 75 total utility:

Additional Utility = MU x Additional Units Consumed

35 = 0.00339 x Additional Units Consumed

Additional Units Consumed = 10,310

Therefore, the value in the blank (A) is 12,345 + 10,310 = 22,655.

To learn more about Utility, visit: https://brainly.com/question/28263537

#SPJ4

∆Hf(BaBr₂) = -262 kJ/mol. Ba atomization energy (175) and 1st ionization energy (503) overcome the lattice energy (+1950), making the formation of BaBr₂ exothermic.

Explanation: A Born-Haber cycle shows the steps involved in the formation of an ionic compound. For BaBr₂, the cycle includes formation of Ba atoms from solid Ba, dissociation of Br₂, ionization of Ba to form Ba⁺, electron affinity of Br to form Br⁻, and formation of the solid BaBr₂ lattice. The lattice energy (+1950 kJ/mol) is overcome by the sum of the atomization energy (175 kJ/mol) and the first ionization energy of Ba (503 kJ/mol), as well as the exothermicity of adding electrons to Br to form Br⁻ (-325 kJ/mol). The overall enthalpy change (∆Hf) for the formation of BaBr₂ is -262 kJ/mol, indicating that the process is exothermic and spontaneous.

Learn more Ba⁺, electron about here:

https://brainly.com/question/19360277

#SPJ11

To determine the density of NH3 gas at 435 K and 1.00 atm, we can use the ideal gas law equation:

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

First, we need to find the number of moles of NH3 gas:

n = PV/RT

n = (1.00 atm) x V / [(0.08206 L atm/mol K) x (435 K)]

Assuming the volume of NH3 gas is 1 L:

n = (1.00 atm) x (1 L) / [(0.08206 L atm/mol K) x (435 K)]
n = 0.0276 mol

Next, we can use the formula for density:

density = mass/volume

To find the mass of NH3 gas, we can use its molar mass of 17.03 g/mol:

mass = n x molar mass
mass = 0.0276 mol x 17.03 g/mol
mass = 0.47 g

Therefore, the density of NH3 gas at 435 K and 1.00 atm is:

density = mass/volume
density = 0.47 g/1 L
density = 0.47 g/L
To determine the density of NH3 gas at 435 K and 1.00 atm, we can use the Ideal Gas Law formula, which is PV = nRT. Here's a step-by-step explanation:

1. Write down the given information:
  - Temperature (T) = 435 K
  - Pressure (P) = 1.00 atm
  - We also need the molar mass of NH3, which is 14.01 (N) + 3 * 1.01 (H) = 17.03 g/mol

2. Rearrange the Ideal Gas Law formula to solve for the number of moles (n) in one liter of NH3 gas:
  - n = PV/RT

3. Substitute the given values:
  - n = (1.00 atm) * (1 L) / (0.0821 L·atm/mol·K) * (435 K)
  - n ≈ 0.0279 mol/L

4. Calculate the mass of NH3 in one liter:
  - Mass = n * molar mass
  - Mass = 0.0279 mol/L * 17.03 g/mol ≈ 0.475 g/L

5. Determine the density of NH3 gas:
  - Density = Mass / Volume
  - Density ≈ 0.475 g/L / 1 L ≈ 0.475 g/L

So, the density of NH3 gas at 435 K and 1.00 atm is approximately 0.475 g/L.

To know more about density visit:

brainly.com/question/29775886

#SPJ11

The main answer to your question is that the molarity of the 250 mL H₂SO₄ solution is 0.8 M.

To find the molarity, we can use the dilution formula, M₁V₁ = M₂V₂, where M₁ and V₁ are the molarity and volume of the stock solution, and M₂ and V₂ are the molarity and volume of the diluted solution. Given M₁ = 10.0 M, V₁ = 20.0 mL, and V₂ = 250 mL, we can solve for M₂:
M₂ = (M₁V₁) / V₂
M₂ = (10.0 M × 20.0 mL) / 250 mL
M₂ = 200.0 mM / 250 mL
M₂ = 0.8 M

We can assume that the density of the stock solution and the diluted solution are the same (which is reasonable for aqueous solutions), and use the formula: Molarity = moles of solute / volume of solution (in liters).

We can calculate the moles of H2SO4 in the 20.0 mL of stock solution: moles = M x V = 10.0 M x 0.0200 L = 0.200 mol When we dilute this to 250. mL,

Summary: The molarity of the 250 mL H₂SO₄ solution that was made from a 20.0 mL of a 10.0 M stock solution is 0.8 M.

Learn more about molarity click here:

https://brainly.com/question/30404105

#SPJ11

The volume at which the gas must be compressed is 17.6 dm³, under the condition that a sample of carbon dioxide that initially occupies 15.0 dm³ at 250 K and 1.00 atm.

For the given case, we are given that the initial volume of carbon dioxide is 15.0 dm³ at 250 K and 1.00 atm and that it undergoes an isothermal compression. Its entropy decreases by 10 J/K.

Now to find the final volume of carbon dioxide, we can apply the formula ΔS = -Q/T = nR ln(V2/V1)
Here
n = number of moles of carbon dioxide,
R = gas constant,
V1 and V2 = initial and final volumes of carbon dioxide respectively .

So ,ΔS = -10 J/K, we can evaluate for V2

V2 = V1 exp(-ΔS/nR)

Here exp() denotes the exponential function.

Staging values

V2 = (15.0 dm³) exp(-(-10 J/K)/(8.314 J/(mol K) × 250 K))

V2 ≈ 17.6 dm³

Therefore, into what volume must the gas be compressed to reduce its entropy is approximately 17.6 dm³.


To learn more about entropy

https://brainly.com/question/30481619
#SPJ4
The complete question is
A sample of carbon dioxide that initially occupies 15.0 dm3 at 250 K and 1.00 atm is compressed isothermally. Into what volume must the gas be compressed to reduce its entropy by 10.0 J K-1?

To some extent, the statement that every electron shields the nuclear charge from every other electron is valid.


Electrons have a negative charge and are attracted to the positively charged nucleus of an atom. However, electrons also repel each other due to their negative charges. As a result, each electron in an atom experiences both attraction to the nucleus and repulsion from other electrons.

The shielding effect occurs when electrons in the inner energy levels of an atom shield the positive charge of the nucleus from the outer electrons. This shielding reduces the net attractive force that the outer electrons experience from the nucleus.

However, it is important to note that not all electrons in an atom shield the nuclear charge equally. Electrons in higher energy levels (further from the nucleus) are less effective at shielding the nuclear charge than electrons in lower energy levels (closer to the nucleus).

Additionally, electrons in the same energy level do not shield each other completely because they still experience some repulsion from each other.

Therefore, while the statement is valid to some extent, it is not a complete description of the complex interactions between electrons and the nucleus in an atom.

learn more about shielding effect

https://brainly.com/question/27985711

#SPJ11

We can use the equation ΔG = ΔH - TΔS, where ΔG is the change in Gibbs free energy, ΔH is the change in enthalpy, T is the temperature in Kelvin, and ΔS is the change in entropy.

First, we need to convert the temperature from Celsius to Kelvin:
27°C + 273.15 = 300.15 K

Now we can plug in the values we have:
ΔG = +210.6 kJ
ΔH = -168.2 kJ
T = 300.15 K
ΔS = ?

ΔG = ΔH - TΔS
ΔS = (ΔH - ΔG) / T
ΔS = (-168.2 kJ - (+210.6 kJ)) / 300.15 K
ΔS = -78.4 kJ / 300.15 K
ΔS = -261.15 J/K

Since the question asks for the entropy change in Joules per Kelvin, we can convert the answer from kJ/K to J/K:
ΔS = -261.15 J/K = -0.26115 kJ/K

Therefore, the answer is:
ΔS = -0.26115 kJ/K or approximately -261 J/K
The closest answer choice is (c) -141.3 J/K, but none of the choices are an exact match.

learn more about Gibbs free energy here:

https://brainly.com/question/20358734

#SPJ11

Answer:

Z: Planet was formed after the sun.

Explanation:

Characteristic Z: The planet was formed after the sun cannot be used to help identify the planet since all the planets in the solar system, including Earth, were formed after the sun. Therefore, this characteristic applies to all planets in the solar system, and it cannot be used to distinguish one planet from another.

Good luck! >:))))

The mass flow rate in the narrow section of the pipe is also 3.93 kg/s.

Density is the measurement of how tightly a material is packed together. It is defined as the mass per unit volume.

To solve this problem, we can use the principle of conservation of mass, which states that the mass flow rate must be the same at any point along the pipe. Therefore, we can use the density and velocity of the water at the beginning of the pipe to calculate the mass flow rate, and then use the continuity equation to find the velocity of the water in the narrow section of the pipe.

The cross-sectional area of the tube at the beginning is A1 = (π/4)*(0.10m)² = 0.00785 m².

The volume flow rate of water at the beginning is Q₁ = A₁*v₁, where v₁ = 0.50 m/s is the velocity of the water. Therefore, Q₁ = 0.00785 m² * 0.50 m/s = 0.00393 m³/s.

The mass flow rate at the beginning is m1 = ρ*Q₁, where ρ = 1000 kg/m³ is the density of water. Therefore, m₁ = 1000 kg/m³ * 0.00393 m³/s = 3.93 kg/s.

According to the continuity equation, the mass flow rate at the narrow section of the pipe is the same as at the beginning, so m₂ = m₁ = 3.93 kg/s.

The cross-sectional area of the tube at the narrow section is A₂ = (π/4)*(0.05m)² = 0.00196 m².

The velocity of the water in the narrow section is v2 = Q2/A2, where Q2 is the volume flow rate of water in the narrow section. Therefore, Q2 = v2*A2.

Using the continuity equation, we have:

m₁ = m₂ = ρ*Q₂ = ρ*v₂*A₂

Substituting the values we found:

3.93 kg/s = 1000 kg/m³ * v₂ * 0.00196 m²

Solving for v₂, we get:

v₂ = 3.93 kg/s / (1000 kg/m³ * 0.00196 m²) = 2.01 m/s

Therefore, the mass flow rate in the narrow section of the pipe is also 3.93 kg/s.

Learn more about density on:

https://brainly.com/question/1354972

#SPJ4

True; the magnitude of the crystal field splitting affects the magnetic properties of a complex ion because it affects the pairing of electrons.

The magnitude of the crystal field splitting refers to the energy difference between the d orbitals in a complex ion, which determines the electronic configuration and the extent of electron pairing. If the splitting is small, the electrons may pair up in the lower energy orbitals, leading to a diamagnetic complex.

If the splitting is large, the electrons may occupy higher energy orbitals, resulting in an unpaired electron and a paramagnetic complex. Therefore, the magnetic properties of a complex ion are directly affected by the magnitude of the crystal field splitting. Hence, the statement "the magnitude of the crystal field splitting affects the magnetic properties of a complex ion because it affects the pairing of electrons" is true.

Learn more about paramagnetic complex here:

https://brainly.com/question/17080272

#SPJ11

A. Hercules-Corona Borealis Great Wall is the object occupies the greatest amount of space.

Objects are entities that have properties and characteristics, and which can be manipulated, interacted with, and observed. Objects are the fundamental building blocks of computer programming and can be used to represent anything from physical entities such as cars, people and animals, to abstract concepts such as numbers and words.

A. Hercules-Corona Borealis Great Wall is the largest known galaxy structure in the universe, occupying an estimated 10 million cubic light-years of space. It is larger than the Milky Way, Andromeda, and Sombrero Galaxy, making it the object that occupies the greatest amount of space.

To learn more about object

https://brainly.com/question/19491767

#SPJ4

Complete Question:
Which object occupies the greatest amount of space?.

A. Hercules-Corona Borealis Great Wall

B. Milky Way

C. Andromeda

D.Sombrero Galaxy

a) KI: Adding KI does not affect the concentration of ammonia, hydroxide ion or ammonium ion.

Concentration is the act of focusing attention on a single object or thought. It is a mental process that requires effort and sustained focus, and it can be developed through practice and repetition. Concentration is a key element of success in many areas of life, from academic and professional pursuits to hobbies and leisure activities. It can help to improve productivity, increase efficiency, and ultimately lead to greater success and satisfaction.

b) NH₃: Adding NH₃ will increase the concentration of ammonia and decrease the concentration of ammonium ion.
c) HI: Adding HI will decrease the concentration of ammonia and increase the concentration of hydroxide ion.
d) NaOH: Adding NaOH will increase the concentration of hydroxide ion and decrease the concentration of ammonium ion.
e) NH₄Cl: Adding NH₄Cl will increase the concentration of ammonium ion and decrease the concentration of ammonia.

To learn more about concentration
https://brainly.com/question/14469428
#SPJ4

According to the question In the iodination of salicylamide, the nucleophile is NaI.

Salicylamide is a chemical compound that is related to aspirin and is used in a number of over-the-counter medications. It is an aromatic, white, crystalline solid that is slightly soluble in water. Salicylamide is used to reduce fever and pain, and is also used topically to treat skin irritations, such as sunburn and insect bites. In combination with other drugs, salicylamide is also used to treat a variety of conditions, including arthritis, headaches, and fever. It is also used in some cosmetic creams and shampoos. Salicylamide is generally considered safe and non-toxic when taken as directed. However, it can cause some side effects, such as stomach upset, nausea, and dizziness.

NaI acts as a source of iodide ions which can react with salicylamide to form the iodinated product. NaOCl, salicylamide, ethanol, and [tex]Na_2S_2O_3[/tex] are not acting as nucleophiles in this reaction.

Therefore the correct option is B.

To learn more about salicylamide

https://brainly.com/question/26722892

#SPJ4

According to the question the Mass of dry ice is 7.92 kg.

Mass is a fundamental measure of matter that is used to describe the amount of matter contained in an object. It is measured in grams (g) or kilograms (kg) and is a scalar quantity, meaning that it is unaffected by an object's position or orientation. Mass is an intrinsic property of matter, which means that it is an inherent property, and it is invariant, meaning that it does not change with time or location.

The amount of dry ice produced from 5.00 x 103L of CO₂(g) at STP can be calculated using the ideal gas law. The ideal gas law states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

Since the volume, pressure, and temperature are given, we can rearrange the equation to solve for n, the number of moles of CO₂(g):

n = PV/RT

n = (101.325 kPa)(5.00 x 103 L)/(8.314 J/mol K)(273.15 K)

n = 0.18 mol CO₂(g)

To calculate the mass of dry ice produced from this volume of CO₂(g) at STP, we can use the molar mass of CO₂, 44.01 g/mol, to convert from moles to grams:

Mass of dry ice = 0.18 mol CO₂(g) x 44.01 g/mol

Mass of dry ice = 7.92 kg

To learn more about Mass

https://brainly.com/question/24191825

#SPJ4

Some types of plastics can change their properties, such as shape, color, or electrical conductivity, due to changes in temperature, pressure, or chemical environment. No, the change in plastic does not necessarily depend on its ability to absorb, reflect, or transmit light.

For example, shape-memory polymers can change their shape in response to temperature changes, without requiring any interaction with light. Similarly, electrochromic polymers can change their color or transparency in response to an electric field, without the need for light absorption. Therefore, the ability of a plastic to change depends on its intrinsic properties and its response to external stimuli, rather than its optical properties.

To know more about electrical conductivity, here

brainly.com/question/31668005

#SPJ1

The molarity of the NH₃ solution that is titrated with a solution of hydrochloric acidis 0.5147 mol/L.

To find the molarity of the NH₃ solution, we need to use the balanced chemical equation for the reaction between NH₃ and HCl:
NH₃ + HCl → NH₄Cl

From the equation, we can see that the stoichiometric ratio between NH₃ and HCl is 1:1. This means that the moles of HCl used in the titration are equal to the moles of NH₃ in the ammonia solution.

First, let's calculate the moles of HCl used:
moles HCl = molarity x volume in liters
moles HCl = 1.25 mol/L x (5.19/1000) L
moles HCl = 0.0064875 mol

Since the stoichiometric ratio between NH₃ and HCl is 1:1, the moles of NH₃ in the ammonia solution are also 0.0064875 mol.

Next, let's calculate the molarity of the NH₃ solution:
molarity NH₃ = moles NH₃ / volume in liters
molarity NH₃ = 0.0064875 mol / (12.61/1000) L
molarity NH₃ = 0.5147 mol/L

Therefore, the molarity of the NH₃ solution is 0.5147 mol/L.

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ11

Therefore, the pH of the solution is 3.24

The dissociation of lactic acid can be represented as follows:

C3H6O3(aq) + H2O(l) ⇌ C3H5O3^-(aq) + H3O^+(aq)

The equilibrium constant expression for this reaction is:

Ka = [C3H5O3^-][H3O^+]/[C3H6O3]

The sodium lactate dissociates in solution to form lactate ions and sodium ions, but we can assume that the concentration of lactate ions is equal to the initial concentration of sodium lactate since it's a weak base.

Since lactic acid is a weak acid, we can use the Henderson-Hasselbalch equation to calculate the pH of the solution:

pH = pKa + log([C3H5O3^-]/[C3H6O3])

The pKa of lactic acid is 3.86.

Substituting the given concentrations into the equation, we get:

pH = 3.86 + log(0.1/1.5) = 3.24

Therefore, the pH of the solution is 3.24, and the answer is (B).

To know more about pH click here:

https://brainly.com/question/491373

#SPJ11

Out of the given salts, the one that produces a neutral solution when dissolved in water is NH4F. When an acid and a base react, they produce salt and water. Some salts can produce an acidic or basic solution depending on the nature of the acid and base used.

In the case of NH4F, it is a salt produced from the reaction of a weak acid (NH4OH) and a strong base (HF). Therefore, it has the ability to produce a neutral solution when dissolved in water. LiOCl, BaBr2, CaSO3, and (NH4)2SO4 are all produced from the reaction of a strong acid and a strong base or a weak acid and a weak base, making them acidic, basic or even amphoteric (able to produce both acidic and basic solutions) when dissolved in water.  For example, if a strong acid and a weak base react, the resulting salt will produce an acidic solution. On the other hand, if a weak acid and a strong base react, the resulting salt will produce a basic solution.

To know more about neutral solution

https://brainly.com/question/29510389

#SPJ11

To calculate the pH of 0.15 M Co(NO3)2, we need to first determine if the solution is acidic, basic, or neutral. Since Co(NO3)2 is a salt, it will dissociate into Co2+ and NO3- ions in water. Neither of these ions is acidic or basic on their own, so the solution will be neutral.

However, the presence of the Co2+ ion can slightly hydrolyze water and create a small amount of H+ ions, making the solution slightly acidic. To calculate the pH, we need to use the equilibrium constant expression for this reaction:

Co2+ + H2O ⇌ CoOH+ + H+

The equilibrium constant expression for this reaction is:

K = [CoOH+][H+]/[Co2+]

Since the solution is neutral, we can assume that [H+] = [OH-] = 1.0 x 10^-7 M. We also know that [Co2+] = 0.15 M, and since CoOH+ is a weak acid, we can assume that it dissociates only slightly and [CoOH+] ≈ 0. Therefore, we can simplify the equilibrium constant expression to:

K = [H+]^2/[Co2+]

Plugging in the values we know:

1.0 x 10^-7 = (x)^2/(0.15)

Solving for x gives us:

x = 3.87 x 10^-4 M

Taking the negative log of this value gives us the pH:

pH = -log(3.87 x 10^-4) = 3.41

Therefore, the pH of 0.15 M Co(NO3)2 is approximately 3.41.

Note: It is important to check that the assumption made for [CoOH+] is valid. If it dissociates more than assumed, it will affect the pH calculation. However, in this case, the assumption is valid since CoOH+ is a weak acid and its dissociation is expected to be minimal.

The correct answer options were not provided, but the calculated pH value of 3.41 falls between d. 5.06 and e. 5.28, suggesting that neither of those options is correct.

To know more pH of 0.15 M Co(NO3)2.  click this link-

brainly.in/question/28535383

#SPJ11