Answer:
15
Explanation:
I got it right I just had the answer
What is the mass (in ng) of 1.23 moles of nickel?
Answer:
7.22 x 10¹⁰ ng Ni
Explanation:
To find the mass of nickel, you need to (1) convert moles to grams (via atomic mass from the periodic table) and then (2) convert grams to nanograms. These ratios need to be multiplied by each other, starting with the given value. It is important to arrange the conversions/ratios in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 3 sig figs to reflect the given value (1.23).
Atomic Mass (Ni): 58.693 g/mol
1 gram = 1 x 10⁹ nanograms
1.23 moles Ni 58.693 g 1 x 10⁹ ng
---------------------- x ---------------------- x --------------------- = 7.22 x 10¹⁰ ng Ni
1 mole 1 g
What are oil traps?
Answer:
A device in which oil can be trapped, or which makes use of oil to trap something else I think
draw a diagram to show how you will separate the salt from sugar using the solvent ethanol
Magnesium burns in air with a dazzling brilliance to produce magnesium oxide: 2 Mg(s) + O2(g) → 2 MgO(s) How many moles of O2 are consumed when 2.10 mol of magnesium burns?
Answer:
1.05 mols of O2 gas
Explanation:
For this type of problem, it's important to understand what the balanced Chemical equation tells us:
Balanced Chemical equationsLet's look at the balanced chemical equation:
[tex]2Mg(s)+O_2(g)-- > 2MgO(s)[/tex]
This equation two sides of the reaction arrow. On the left are the reactants (things you start with, and that react during the chemical reaction), and on the right side are products (things that are produced during the chemical reaction that you end with).
The numbers in front of each compound tell how many of molecules are involved for a full reaction without anything left over. A "mol" is a large quantity ([tex]6.022*10^{23}[/tex]), in this case, of molecules , since it's unlikely you're only taking a single molecule of each substance (it would be so tiny, you wouldn't even know you were doing the reaction).
So,for every 2 moles of Magnesium used, we'll also need 1 mole of Oxygen, and it will produce 2 moles of Magnesium Oxide.
In a way, during the reaction it's almost like 2 moles of Magnesium is equal to 1 mole of Oxygen and is equal to 2 moles of Magnesium Oxide:
[tex]2 mol Mg(s)=1mol O_2(g)=2molMgO(s)[/tex]
From here, we can build some unit ratios, to convert between the known quantity of moles we have, and find the unknown quantity of moles that are requested.
Finding the right unit ratioWe know that we are looking at 2.10 mol of Magnesium, so we want a unit ratio with moles of Mg on the bottom. We want to find moles of O2, so we want a unit ratio of moles of O2 on top.
The unit ratio we want is the middle part of the equation, divided by the left part of the equation.
[tex]2 mol Mg(s)=1mol O_2(g)\\\frac{2 mol Mg(s)}{2 mol Mg(s)}=\frac{1mol O_2(g)}{2 mol Mg(s)}\\1=\frac{1mol O_2(g)}{2 mol Mg(s)}[/tex]
Since this quantity is 1, it is a unit ratio and can be multiplied to other things to change their units (for this problem).
Finding the answerStarting with what we know, and multiplying by our unit ratio:
[tex]2.10 mol Mg(s)*\frac{1mol O_2(g)}{2 mol Mg(s)}=1.05mol O_2(g)[/tex]
Notice that the units from the first quantity cancel with the units on the bottom of the fraction, leaving only the unit on top of the fraction ... the exact units we wanted!
So, 1.05mols of O2 would be consumed during the reaction if exactly 2.10moles of Magnesium are burned.
Which regulates the flow of electrical current to the filament of the x-ray tube? a. high-voltage circuit
b. low-voltage circuit
c. high-voltage transformer
d. low-voltage transformer
What is the frequency of the green light emitted by a hydrogen atom with a wavelength of 525 nm?
The frequency of the green light emitted by a hydrogen atom with a wavelength of 525 nm is [tex]5.71[/tex]×[tex]10^{14} s^{-1}[/tex]
What is wavelength?
It is the length between two successive crests or troughs of any wave.What is a frequency?
It is the total number of waves that pass through a fixed point in unit time.Wavelength=525nm
The relation between wavelength and frequency
[tex]v=\frac{c}{lambda}[/tex]
[tex]v=[/tex]frequency
[tex]c=[/tex]speed of light = [tex]3.0[/tex]×[tex]10^{8}[/tex][tex]m/sec[/tex]
λ(lambda)=wavelength
substitute the value in the equation mentioned above
[tex]v=3.0[/tex]×[tex]10^{8}[/tex][tex]/525[/tex]×[tex]10^{-9}[/tex]
[tex]=5.71[/tex]×[tex]10^{14}[/tex][tex]s^{-1}[/tex]
hence, the frequency of the green light emitted by a hydrogen atom with a wavelength of 525 nm is [tex]5.71[/tex]×[tex]10^{14} s^{-1}[/tex]
learn more about hydrogen emission here:
https://brainly.com/question/27231030
#SPJ10
Please and thank you
3.8mL of 0.42 phosphoric acid is required.
Reaction
2H3PO4 + 3CaCL3 → Ca3(PO)4 + 6HCl
moles CaCl2 =0.16 mol/L x0.010 L = 0.0016 mol
moles of H3Po4
= 0.0016mol of CaCl2 x 2 mole of H3PO4/3mole of CaCl2
= 0.00106 mol
V of H3PO4 = 0.0016/0.42 = 0.0038L = 3.8mL
V of H3PO4=3.8mL
To know more about calculation in milliliters refer to:-
https://brainly.com/question/23276655
#SPJ10
NH3 is produced by the reaction of 0.450 moles of N2 and 0.600 moles of H2 according to the following equation: 2N2 + 3H2 ⟶ 2NH3. (a) How many moles of NH3 are produced? (b) What is the percent yield if 5.52g of NH3 is produced?
The moles of nitrogen produced is 0.40 moles of ammonia.
The Percent yield of ammonia is 81.2%
What moles of ammonia is produced?The moles of ammonia produced is obtained from the mole ratio of the reaction.
The mole ratio of hydrogen to nitrogen is 3 : 2
Based on the mole ratio, the limiting reactant is hydrogen.
Moles of nitrogen produced = 0.600 * 2/3 = 0.40 moles of ammonia.
mass of ammonia expected = 0.4 * 17 g = 6.8 g
Percent yield = 5.52/6.8 * 100% = 81.2%
Learn more about mole ratio at: https://brainly.com/question/19099163
#SPJ1
Solve for x , where M is molar and s is seconds.
Enter the answer. Include units. Use the exponent key above the answer box to indicate any exponent on your units.
x=(3.7×103M−2s−1)(0.37M)3
Answer:
187.416 M/s
Explanation:
First the units M^-2 s^-1 * M^3 = M/s
now the numbers
3700 * .37^3 = 187.416
Which of the following methods correctly describes the preparation of 1.00 L of an aqueous solution of 0.500 M NaOH?
Answer:
Place 20.0 g NaOH(s) in a flask and dilute to 1.00 L with water.
Explanation:
How many stereoisomers could exist for the following structure?
4
8
16
32
Answer:
64
Explanation:
ieijkjkjjsjsjsjsjsjskskakskskskskkkdksksjdjdjdjdjdjdjdjdndndndmdndndmdmdndndndjdjdjdjdjdkdkekrk
10. How many grams of CoCl₂ in 0.5 liters would be used to make a 1.0 molar solution? I
a. Predict the outcome if 0.5 liters of water is added to 0.5 liters of 0.70M solution of CuSO4
b. Describe what could happen is there is evaporation in the original 0.5 liters of 0.70M
solution of CuSO4
The weight of CoCl₂ used to make 0.5 ltr 1 Molar solution is 49.5g.
How to Calculate weight of substance ?The weight of a substance can be calculated by multiplying the number of moles of the substance by its molar mass.
However,
the number of moles of CoCl₂ must be calculated using the following formula:
no of moles = 0.5L × 1M
no of moles = 0.5moles
Molar mass of CoCl₂ = 99g/mol
mass of CoCl₂ = 0.5 × 99
mass of CoCl₂ = 49.5g
Hence, the weight of CoCl₂ used to make 0.5 ltr 1 Molar solution is 49.5g.
Learn more about Mass here ;
brainly.com/question/26416088
#SPJ1
Chemistry: Please make sure to answer each question. Thank you in advance.
Create a diagram of your electroplating apparatus (an electrolytic cell). Then submit your drawing with the following terms labeled correctly. Or, beginning with the positive terminal of the battery and ending with the negative terminal of the battery, describe the path that the electricity takes and where each of the following occurs:
anode
cathode
copper strip
battery
positive terminal
negative terminal
place where oxidation occurs
place where reduction occurs
electrolyte solution
coin (or nail)
direction of electron flow
Answer:
(Score for Question 2: ___ of 7 points)
Describe the results of your procedure with the coin.
Answer:
(Score for Question 1: ___ of 6 points)
Write the two half-reactions that occur in this electroplating process. Be sure to include the states of the elements or ions.
Answer:
The electroplating process of the coin results in the coating of the coin with copper metal.
What is electroplating?Electroplating is the process of using coating the surface of a metal with another one electrolytic cell.
The electroplating of the coin is done using copper as the anode and the coin as the cathode. The electrolyte is copper sulfate solution.
Oxidation occurs at the anode with the copper metal being converted to copper (ii) ions.
Reduction occurred at the cathode as the copper (ii) ions in the solution accept electrons to become copper metal and the coin being coated with copper.
The half-reactions are shown below:
At the anode:
[tex]Cu(s) \rightarrow Cu^{2+}(aq) + 2e^{-}[/tex]
At the cathode:
[tex]Cu^{2+}(aq) + 2e{-} \rightarrow Cu(s)[/tex]
Therefore, the electroplating process of the coin results in the coating of the coin with copper metal.
Learn more about electroplating at: https://brainly.com/question/3913850
#SPJ1
Which molecule is polar, based on structure?
A. sulfur dioxide
OB. carbon disulphide
OC. ethylene
O D. carbon tetrachloride
Reset
Answer:
Sulfur dioxide (SO2)
⇒ Why is this the best option?
To determine the polarity of the molecule, there are two requirements. The first one has a variety of terminal atoms, whereas the second has a lone pair on the center atoms. The molecule is polar if one of the requirements is met; else, it is nonpolar. The oxygen atom is a terminal atom because it surrounds the sulfur atom, which is the center element in the SO2 molecule's Lewis structure. In this molecule, there are two terminal oxygen atoms. If we look at the first criterion, we can see that it is not met because it calls for the presence of two separate terminal atoms.
#SPJ2
What can help engineers develop ways to prevent rusting?
OA. Understanding the solubility of metal ions
B. Understanding double-displacement reactions
C. Understanding oxidation-reduction reactions
D. Understanding the phase changes of metals
Answer: Understanding oxidation-reduction reactions
Explanation:
Rusting occurs when electrons are exchanged between iron and oxygen.
Question 3:
The force of gravity between a planet and its moon is 371 N. If the planet has a mass of 4 x 1022 kg and the moon has a mass of 5 x 105 kg, what is the distance between their centers?
Answer:
=6×10^7metre
Explanation:
By using formula,
F=GMm/d^2
pls tell this answers
Answer:
okay
Explanation:
9 . acidic
10. hydrogen
answer the following questions
11. Gold as a precious metal is used widely in making jewelry items. This metal is preferred over others for jewelry pieces for various reasons. One important reason for its popularity is that it does not react with atmospheric moisture and therefore, it does not rust.
12. corrosion is defined as rust it's due to humidity and moisture
13. Sulphur appears much below chlorine in the reactivity table and cannot displace chlorine from dilute HCl.
14. Highly conductive metal
Surpassed only by silver, copper is a highly conductive metal. This means electricity can pass through it with greater ease, making it ideal for use in electrical wires. Companies can use other conductive metals to create electrical wires.
15. Corrosion
Copper metal when exposed to air turns green in color due to corrosion. When the copper vessel is exposed to air in the rainy season, the metal reacts with gases, moisture, and atmospheric gases to form a mixture of copper carbonate and copper hydroxide. This gives a green color to the surface of the copper meta
16. Silicon
silicon is the backbone of the electronics industry. Because silicon is the reason for the fast development happened in the field of electronics. therefore, silicon is the backbone of electronics.
17. High chemical reactivity
Sodium is stored under kerosene because of its high chemical reactivity with almost all of the other elements (for example oxygen from the air which oxidizes it instantly). Kerosene and mineral oil are the only chemicals that make sodium inert. Usually, when Na reacts with a solvent it liberates hydrogen gas from its composition.
18. Metal oxides are oxides of metals. Nonmetal oxides are oxides of nonmetals. The main difference between metal oxides and nonmetal oxides is that metal oxides are basic compounds whereas nonmetal oxides are acidic compounds.
19. Silver is more likely to tarnish near a petroleum refinery than in a place far away from it because when silver reacts with petroleum or hydrogen sulfide present in it as a pollutant in the air, it starts forming a black coating of silver sulfide.
20. A noble metal is ordinarily regarded as a metallic chemical element that is generally resistant to corrosion and is usually found in nature in its raw form. Gold, platinum, and the other platinum group metals (ruthenium, rhodium, palladium, osmium, iridium) are most often so classified. Silver, copper, and mercury are less often to sometimes included as noble metals although each of these usually occurs in nature combined with sulfur.
How many possible electrons can be held in the Bohr model n=8 energy level?
Electrons in the Bohr model follow the number of elements in the rows of the periodic table.
2 in the first orbit
8 in the second and third ring
18 in the fourth etc...
The Bohr model is a simplistic means of explaining the placement of the subatomic particles of the elements of the periodic table.
The Bohr model arrangement of electrons follows the same pattern as the periodic table.
2 elements in the first row, and 2 electrons in the first orbit.
8 elements in the second row, and 8 electrons in the second orbit.
8 elements in the third row, and 8 electrons in the third orbit.
The fourth and fifth orbits would therefore hold 18 electrons.
For most chemists, the Bohr model does not work well beyond the third row of the periodic table because the model becomes quite oversized and bulky.
5 Examples of simple salts
Identify the branch of chemistry being described.
a. _______________ study of the behavior and changes in matter including energy transfers, reaction mechanisms, and reaction rates.
b. _______________ study of compounds and chemicals containing carbon, which include pharmaceuticals, drugs, and plastics.
c. _______________ study of the components and composition of matter, including food nutrients, and quality control.
d. _______________ study of matter and processes that occur in biological organisms, including metabolism and fermentation.
Answer:
a. Physical Chemistry
b.Organic Chemistry
c.Food analysis, a very important branch of analytical chemistry
d. Biochemistry
Explanation:
Identify if the following substances (a-h) are elements or compounds.
Answer:
Boron, Hydrogen, Helium, Lithium, Beryllium, Carbon, Nitrogen, Oxygen, etc.
Explanation:
These are all elements, not all of them.
Part E
From the observations of the simulation, which strategy was most effective for quickly and efficiently producing ammonia? Why do you think this strategy is most effective?
The production of ammonia will be favored at high pressure and low temperature.
What is an exothermic reaction?The term exothermic reaction has to do with a reaction in which the forward reaction is favored at lower temperatures.
Now looking at the reaction coordinate and the equation of the reaction, we know that the production of ammonia will be favored at high pressure and low temperature.
Learn more about ammonia:https://brainly.com/question/12276882
#SPJ1
balance the chemical
reaction by providing the
correct coefficient
Answer:
2HBr + Ba(OH)2 ____ BaBr2 + 2H2O
The numbers placed in front of formulas to balance equations
What type of reaction is represented by the following equation?
Mg(OH)2 (aq) + 2 HCl (aq) --> MgCl2 (aq) + 2 H2O (l)
Answer: Double replacement reaction
Explanation:
Please help SCH3U :)
b
Explanation:
containing of ion electron and protons
calculate the molecular weight of carbon dioxide
Answer:
44.01 g/mol
Explanation:
Carbon dioxide is produced when carbon and oxygen are burned.
To totally burn carbon into carbon dioxide, or CO2, we require one mole of oxygen for every gram of carbon by weight.
or alternatively:
You produce 12+216=44 g of carbon dioxide for every 12 g of carbon.
The weight of CO2 in kg may be calculated if the amount of CO2 in litres is known by converting it to moles and multiplying it by 44.
Write and balance the equation for the combustion of the fatty acid lauric acid, (C12H24O2).
C12H24O2 +17 O2-------->12CO2 + 12H2O
Combustion:-
combustion is a chemical reaction that often involves the presence of oxygen and produces heat and light in the form of flames.
Lauric acid:-Lauric acid has a 12-carbon backbone and is a saturated medium-chain fatty acid. In addition to being a key component of coconut oil and palm kernel oil, lauric acid occurs naturally in a variety of plant and animal fats and oils.
White solid lauric acid has a little bay oil odour to it.
Lauric acid is a cheap, non-toxic, and easy-to-handle substance that is frequently employed in lab studies on melting-point depression. Because lauric acid is a solid at ambient temperature but a liquid at boiling temperatures, it can be used to test different solutes to determine their molecular weights.
To learn more about Fatty acids refer to :-
https://brainly.com/question/26353151
#SPJ10
Which of these reactions are acid-base reactions?
Answer:
The fifth answer choice (NH3 + H2O = NH4+ + OH-)
Explanation:
An acid-base reaction occurs when an acid and base combine, and the acid, (which is H2O in this case) "donates" a proton, or an H+ to the base. In this reaction, H2O gave one of its H+ to NH3, to make NH4+ and OH-. NH4+ now has a positive charge because it gained a positive ion, while OH- now has a negative charge because it gained a negative ion.
How many valence electrons does Rb (rubidium) have?
Answer:
The total number of electrons in a valence shell is called valence electrons. The electron configuration of rubidium shows that the last shell of rubidium has an electron. Therefore, the valence electrons of rubidium(Rb) are one.
A 10g of limestone is treated with dilute hydrochloric acid.The liberated gas measured at 27°C and 750mmHg is 18.5dm^3.Find the percentage purity of calcium carbonate.
Your question's data is not correct, it should be 100 grams of limestone instead of 10 grams, You will find the correct solution below according to that.
The percentage purity of calcium carbonate is 82.5%
The balanced chemical equation is
CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂
Because CO₂ is a gas, you can easily convert it to mole directly
No. of mol of CO₂ = volume dm³ /22.4 dm³
No. of mol of CO₂ = 8.5 dm³ / 22.4 dm³
No. of mol of CO₂ = 0.825 mol
According to equation 1 mole of CO2 is made from 1 mole of CaCO3
So, 0.825 mole of CO2 will be made from 0.825 mole of CaCO3
Mass of CaCO3 = moles of CaCO3 × Molar mass of CaCO3
Mass of CaCO3 = 0.825 × 100 grams
Mass of CaCO3 = 82.5 grams
Percentage purity of CaCO3 = (mass of CaCO3/Total mass of CaCO3) × 100
Percentage purity of CaCO3 = (82.5/100) × 100 %
Percentage purity of CaCO3 = 82.5 %
Thus we can say that as percentage purity is the percentage of mass of pure compound on per unit of total compound, the percentage purity of the calcium carbonate will be 82.5 %
Learn more about Percentage Purity here:
https://brainly.com/question/25446369
#SPJ10
