In a reaction, 0.209 moles of gas is evolved. Given that the pressure is 0.669 atm and the volume of the gas is 7.30 L, calculate the
temperature of the gas in Kelvin, giving your answer to three significant figures.
The value of R is 0.0821 L'atm-K-1.mol-1
Temperature =
Kelvin

Answer:

chu papi

Explanation:

Answer:

›› FeBr2 molecular weight. Molar mass of FeBr2 = 215.653 g/mol. This compound is also known as Iron(II) Bromide. Convert grams FeBr2 to moles or moles FeBr2 to grams. Molecular weight calculation: 55.845 + 79.904*2 ›› Percent composition by element

Explanation:

If 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

Mass is defined as a way to gauge how much matter there is in a substance or thing. The kilogram (kg) is the fundamental SI unit of mass, while lower masses can also be measured in grams (g). Atoms make up everyday matter. A majority of an atom's mass is contained in its nucleus.

Given Fe = 38.6 g.

Fe has a molar mass = 55.845 g/mol.

Given mass/molar mass equals 38.6g/55.845gmol-1, or 0.6912 moles of iron.

The reaction is described as Fe + Br2 FeBr2.

One mole Fe yields 1 mole of FeBr2.

FeBr2 would be produced from 0.6912 moles of Fe.

FeBr2 has a molar mass of 215.65 g/mol.

Moles of FeBr2 x Molar mass of FeBr2

= 215.65 g/mole x 0.6912 mole

= 149.06 g FeBr2 produced is the formula.

Thus, if 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

To learn more about mass, refer to the link below:

https://brainly.com/question/19694949

#SPJ2

Answer:

It takes six molecules of carbon dioxide and six molecules of water to make one molecule of glucose.

Answer:

Idek sorry

Explanation:

So sorry i think its 1.00

The claim that the strongest intermolecular interactions between propanol molecules arises from hydrogen bonding is True.

Intermolecular forces are weaker attraction forces that are utilized to define physical characteristics of molecules such as:

Hydrogen bonding is an type of intermolecular forces.

It is a type of dipole-dipole interaction that only happens when a hydrogen atom is connected to the atomic element of oxygen, nitrogen, or fluorine.

From the question given, in the propanol (CH3CH2CH2OH) molecule, the hydrogen usually has a partially positive charge which attracts the partially negative charge of the oxygen.

Therefore, we can conclude that the claim is True.

Learn more about Hydrogen Bonding here:

https://brainly.com/question/10904296?referrer=searchResults

The volume of sulphuric acid, H₂SO₄ needed for the complete reaction with 72.2 g of sodium hydroxide, NaOH is 5.31 L

We'll begin by calculating the number of mole in 72.2 g of NaOH. This can be obtained as follow:

Mass of NaOH = 72.2 g

Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol

Mole = mass / molar mass

Mole of NaOH = 72.2 / 40

2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O

From the balanced equation above,

2 moles of NaOH reacted with 1 mole of H₂SO₄.

Therefore,

1.805 mole of NaOH will react with = 1.805 / 2 = 0.9025 mole of H₂SO₄.

Mole of H₂SO₄ = 0.9025 mole

Molarity of H₂SO₄ = 0.170 M

Volume = mole / Molarity

Volume of H₂SO₄ = 0.9025 / 0.170

Thus, the volume of H₂SO₄ needed for the reaction is 5.31 L

Learn more: https://brainly.com/question/14356462

Molar mass of Argon, Ar = 39.95 g Mass of 1 atom, m = 39.95 / (6.023 * 10^23) = 6.64 * 10^(-23) g =6.64 * 10^(-26) Kg Now, Kinetic Energy, KE = (1/2) * m * v^2 where velocity,v = 650 m/s Mass of 1 atom, m = 6.64 *...

- BRAINLIEST answerer

Answer:

1.40×10-20

Explanation:

Oh calculate the mass of 1 atom of argon the molar mass of argon 39.95g that is 6.0²×10²³atoms maybe...?

Answer:

Subduction Process where the oceanic plate subducted under the continental plates because it denser than the Continental plate.

Fire extinguishment is referred to the stage in which flames are not visible

and the combustible item no longer generates heat.

This stage refers to when the fire has been put out through a fire

extinguisher or other compounds.   When fire is put out, there is no longer

flames present.

The absence of flames also means that there is no heat generation or

combustion products due to the absence of a heat source.

Read more on https://brainly.com/question/24313137

Answer:

16.7%

Explanation:

40 ml of salt water + 200 ml of solution = 240 ml

40/240 = 4/24 = 1/6=16.7%

Diamond is composed of hexagonal rings in which sp3 hybridized carbon atoms are linked together.

Hybridization refers to the mixing of atomic orbitals to yield hybrid orbitals that are suitable for bonding. The energy of orbitals that combine to form hybrid orbitals must be close enough for such combination to take place.

Diamond is composed of hexagonal rings in which sp3 hbridized carbon atoms are linked together. Each carbon atom in diamond is tetrahedral.

Learn more: https://brainly.com/question/967776

The mixing of the two different orbitals to form a compound is called hybridization. For example mixing of s and p orbits.

The correct answer is sp3.

The arrangement of the elements in a different manner to form a new compound is called allotropes. For example, diamond and graphite are the allotropes of carbon.

The valence electrons are in p orbitals and p orbit mixed after the s orbitals.

Therefore, the correct answer is sp3

For more information, refer to the link:--

https://brainly.com/question/3523174

Answer:

dinitrogen pentachloride

Answer:

ionic bond

Explanation:

Calcium gives its two valence electrons to oxygen and forms an ionic bond with oxygen. An ionic bond formed when one atom transfers one or more electrons from itself to its neighboring atom, and an ionic bond formed between the two atoms of the compound.

Answer:

32

Explanation:

Answer:

D

Explanation:

D Is The Answer Fella, My Head Hurt Really Bad

Answer:   ionosphere

Explanation:       First it bounces off a top layer of the atmosphere called the ionosphere, then it bounces back to the Earth (this is reflection. It then bounces up again to the ionosphere, and continues bouncing back again until it reaches the radio receiver. This is called a skywave, which works around 3 to 30 MHz.

Entropy increases in reaction 1 due to increase in the number of particles while entropy decreases in reaction 2 due to decrease in the number of particles.

Entropy refers to the degree of disorderliness in a system. The higher the entropy, the more disorderly the system is and the lower the entropy, the less disorderly the system is. We must note that entropy increases with increase in the number of particles.

In the reaction,  2 KClO3 (s)⇌2 KCl (s)+3 O2 (g), entropy increases because one of the products is a gas and the number of particles increases from left to right. In the second reaction, CoCl2 (s)+6 H2O (g)⇌CoCl2⋅6H2O, entropy decreases because the number of particles decreases.

Learn more: https://brainly.com/question/14281129

Answer: A rise in temperature increases the kinetic energy and speed of particles; it does not weaken the forces between them. The particles in solids vibrate about fixed positions; even at very low temperatures. Individual particles in liquids and gases have no fixed positions and move chaotically.

Answer:

energy kinetic particles in substance

Answer:

5.25 grams of potassium sulfate will get crystallize out.

Explanation:

Solubility of potassium sulfate at 40 °C = 15 g/100 g

This means that at 40 °C 15 g of potassium sulfate will get completely dissolved in 100 of water.

39.0 g of potassium sulfate to 225 g water, carefully heating the solution.

Amount of potassium sulphate will get dissolve in 225 g of water at 40 °C will be:

[tex]\frac{15g}{100g}[/tex] × 225 = 33.75g

Amount of potassium sulfate precipitated out by the solution:

= 39.0 g-33.75 g = 5.25 g

At 40 °C 5.25 g of potassium sulfate will get precipitate out from the solution which means that solution is saturated.

Saturated solution are solution in which solute is dissolved in maximum amount. Further addition of solute results in precipitation of solute form the solution.

5.25 grams of potassium sulfate will get crystallize out.

(Hope this Helps can I pls have brainlist (crown)☺️)

Answer:

hydrogen bond is a type of dipole-dipole interaction; it is not a true chemical bond it is a mere electrostatic attraction. These attractions can occur between molecules or within different parts of a single molecule. Intramolecular hydrogen bonds are those which occur within one single molecule.

Explanation:

CAN I GET BRAINLIEST

Answer:,   Correct option is    0.288m/s

Explanation:    

The relationship between the velocity of the wave, its wavelength and frequency is given by the formula

Wavelengthλ=

Frequency(ν)

Speed(v)

​

,

where, v - velocity of the wave

           λ - wavelength of the wave

          f - frequency of the wave.

In the question it is given that the frequency is 4.8 Hz and the wavelength is 6.0 cm, that is, 0.06 meters.

The velocity of the sound is calculated as follows.

v=f×λ=4.8 Hz×0.06 m=0.288 m/s

Hence, the speed of the water wave is 0.288 m/s.

Answer:

radiation, conduction, convection, conduction

Answer:

radiation , conduction, convection, conduction

Answer:   6.77*1022 Molecules

Explanation: :)

Answer: The following information should be included;

What is the difference between the greenhouse effect, climate change and global warming?

What proof do we have that climate change is happening?

Why is it happening?

If the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high.

Spectrometry measures the interaction of light with molecules. The absorbance refers to how much light that interacts with molecules of the substance. The more the concentration of the substance the higher the absorbance of the solution.

Hence, if  the absorbance of a solution of curcumin which is too concentrated is measured, the absorbance will be unusually high. An unusually high absorbance tells us that the solution is too concentrated.

Learn more: https://brainly.com/question/13440572

Answer:The law of conservation of energy

Explanation:

states that the total energy is constant in any process. Energy may change in form or be transferred from one system to another, but the total remains the same.

Answer:

landslide mudflows slump and creep

Explanation:

no explanation

Answer: the answer is 0.074Hz

Explanation:

Given, (In air)

Velocity V=340m/s

Frequency f=20,000Hz

Wavelegth λ=?

V=f.λ

λ=

F

V

​

=

20,000

340

​

=0.017Hz

Also, Given (in Water)

Velocity, V=1480m/s

Frequencyf=20,000Hz

wavelength, λ=?

V=F.λ

λ=

F

V

​

=

20,000

1480

=​0.074Hz

Answer:

frequency

Explanation:

frequency is velocity/ wavelength

340/1.36

250