In a trial, a 0.300 m solution of N[tex]_2[/tex] had a new molarity of 0.156 after 500 seconds. Therefore, 0.0003mol /l× s is the rate of formation of N[tex]_2[/tex].
What is rate of reaction?The reaction rate or rate of reaction is the rate at which a chemical reaction occurs, defined as proportional to the rise in product concentration per unit time and the reduction in reactant concentration per unit time.
The speeds of reaction might vary greatly.
rate of formation of N[tex]_2[/tex] = change in concentration/ change in time
=0 .300 - 0.156 /0- 500
=0.15/500
=0.0003mol /l× s
Therefore, 0.0003mol /l× s is the rate of formation of N[tex]_2[/tex].
To learn more about rate of reaction, here:
https://brainly.com/question/8592296
#SPJ1
Please help will give brainliest!
The concentration of the compound at 50.9°C is 0.098 g/mL.
What is concentration?Concentration is the act of focusing one's attention on a specific task or activity. It is the ability to focus on one thing at a time, while blocking out distractions. It is a skill that can be developed over time and with practice. Concentration is important in many areas of life, including studying, work, and sports. It is also a key factor in achieving success in any endeavor.
At 50.9°C, the mass of the boat + solution was 0.934 g and the mass of the boat + dry was 0.836 g.
The difference between the two masses is 0.098 g.
This difference is equal to the mass of the solute (in this case, the compound) that was added to the boat. Thus, the concentration of the compound at 50.9°C is 0.098 g/mL.
To learn more about concentration
https://brainly.com/question/28564792
#SPJ1
If ethanol, percentage composition is 45.45% of C 23.40% of H, and 31.15% of O, which of the following s the number relative moles carbon present
Answer:
3.784
Explanation:
Answer: 3.784
Explanation:
suppose we have two identical boxes of matter, a and b, that are in thermal contact but cannot exchange materials. they come to thermal equilibrium. system 1 consists of box a alone, while system 2 consists of both boxes a and b. what can you say about the entropy of the two systems?
The entropy of system 1, consisting of box A alone, will remain constant, while the entropy of system 2, consisting of both boxes A and B, will be greater due to the increase in the number of available microstates.
When two identical boxes of matter, A and B, are in thermal contact but cannot exchange materials, they will eventually come to thermal equilibrium. At thermal equilibrium, the two boxes will have the same temperature, and their individual entropies will be equal.
If we consider system 1, which consists of box A alone, its entropy will remain constant as it is an isolated system. However, if we consider system 2, which consists of both boxes A and B, the total entropy of the system will increase because there are now more ways for energy to be distributed between the two boxes. In other words, the addition of box B provides more microstates or configurations for the system to occupy, and hence the entropy of the combined system will be greater than that of system 1.
Therefore, we can say that the entropy of system 2, consisting of both boxes A and B, will be greater than the entropy of system 1, consisting of box A alone, as a result of the greater number of available microstates in system 2. This increase in entropy is a manifestation of the second law of thermodynamics, which states that the entropy of an isolated system will always tend to increase over time.
To learn more about entropy Click here:
brainly.com/question/13135498
#SPJ4
If 200g of CH3OH is used in a combustion process. How many grams of water can be produced?
224.7 grams of water can be produced by the combustion of 200 grams of CH3OH.
What is combustion?
Combustion is a chemical reaction that occurs between a fuel and an oxidizing agent, usually oxygen, which results in the release of energy in the form of heat and light. During combustion, the fuel is oxidized (i.e., loses electrons) and the oxidizing agent is reduced (i.e., gains electrons). This reaction is often accompanied by the production of other products, such as water and carbon dioxide.
The balanced chemical equation for the combustion of CH3OH is:
2 CH3OH + 3 O2 → 2 CO2 + 4 H2O
From the balanced equation, we can see that 2 moles of CH3OH react with 4 moles of H2O. Therefore, we can use the molar mass of CH3OH to calculate the number of moles of CH3OH, and then use the stoichiometric ratio to calculate the number of moles of H2O produced. Finally, we can convert the moles of H2O to grams using the molar mass of water.
Step 1: Calculate the number of moles of CH3OH.
molar mass of CH3OH = 12.01 g/mol (C) + 4(1.01 g/mol) (H) + 16.00 g/mol (O) = 32.04 g/mol
moles of CH3OH = mass / molar mass = 200 g / 32.04 g/mol = 6.237 mol
Step 2: Calculate the number of moles of H2O produced.
From the balanced equation, we need 4 moles of H2O for every 2 moles of CH3OH.
moles of H2O = 4 x moles of CH3OH / 2 = 4 x 6.237 mol / 2 = 12.474 mol
Step 3: Calculate the mass of H2O produced.
molar mass of H2O = 2(1.01 g/mol) + 16.00 g/mol = 18.02 g/mol
mass of H2O = moles of H2O x molar mass of H2O = 12.474 mol x 18.02 g/mol = 224.7 g
Therefore, 224.7 grams of water can be produced by the combustion of 200 grams of CH3OH.
To learn more about combustion:
https://brainly.com/question/12172040
#SPJ1
Classify the outcomes based on whether they are caused by adding or removing a reactant from a chemical reaction.
The rate of the reverse
reaction increases.
The concentration of
products decreases.
The concentration of
products increases.
The rate of the forward
reaction increases.
A) adding a reactant
B) removing a reactant
PLEASE BE ACCURATE!!! Thank you very much!!:)
Answer:
The rate of the reverse reaction increases - B) removing a reactant
The concentration of products decreases - B) removing a reactant
The concentration of products increases - A) adding a reactant
The rate of the forward reaction increases - A) adding a reactant
Explanation:
In a chemical reaction, adding a reactant increases the amount of reactants in the system, which can increase the rate of the forward reaction. On the other hand, removing a reactant decreases the amount of reactants, which can increase the rate of the reverse reaction.
The increase in the rate of the reverse reaction can lead to a decrease in the concentration of the products. Meanwhile, the increase in the rate of the forward reaction can lead to an increase in the concentration of the products.
So, based on this information, we can classify the outcomes as follows:
The rate of the reverse reaction increases: B) removing a reactant
The concentration of products decreases: B) removing a reactant
The concentration of products increases: A) adding a reactant
The rate of the forward reaction increases: A) adding a reactant
ALLEN
Which choice describes climate?
Responses
The U. S. Gulf coast typically has warm, wet weather and tropical storms during the summer and fall. The U. S. Gulf coast typically has warm, wet weather and tropical storms during the summer and fall. The U. S. Gulf coast was hit by Hurricane Katrina in 2005 and suffered extensive damage. The U. S. Gulf coast was hit by Hurricane Katrina in 2005 and suffered extensive damage. In March 1971, Canada was hit by a major blizzard and up to 32 inches of snow fell. In March 1971, Canada was hit by a major blizzard and up to 32 inches of snow fell. An extremely dangerous tornado hit Jarrell, Texas in 1997 destroying 40 homes
The Gulf region, which is in the wet-dry tropics (savanna), experiences year-round temperatures of hot to very hot.
Looking at average temperatures and precipitation through time is the easiest way to characterize a climate. The amount and type of precipitation, sunshine hours, typical wind directions and speeds, the number of days above freezing, weather extremes, and the geography of the area are additional factors that can be used to describe climate. The Northwest Coastal, High Plains, Midwest, Mid-Atlantic, Southeast, South, and Southwest are the seven principal climate regions of the United States. As a result of the fact that these states have similar weather patterns throughout the year, they are included in each climate zone for the United States.
Learn more about climate here:
https://brainly.com/question/10440860
#SPJ4
How many moles of Ana are in 42 grams of Na
Answer:
1.83 moles
Explanation:
The question is: how many moles of "Na" are in 42 g of Na, right?
1 mole of Na = 23 g
so # mole = (1 mole / 23 g) x 42g = 1.82 moles
what does she mean by this?
This means that the balance equation for the reaction of NH₄Cl (ammonium chloride) producing NH3 (ammonia) and HCl (hydrochloric acid) is: NH₄Cl (s) → NH₃ (g) + HCl (g).
How to write a balanced equation?A balanced chemical equation is a representation of a chemical reaction that shows the same number of atoms of each element on both the reactant and product sides of the equation. To balance a chemical equation, the following steps can be followed:
Write the unbalanced equation, including the correct formulas for the reactants and products.Determine the number of atoms of each element on the reactant and product sides.If necessary, adjust the coefficients of the reactants and products to make the number of atoms of each element equal on both sides.Check the equation to make sure that it is balanced and that the coefficients are the smallest whole numbers possible.Learn more on balanced equations here: https://brainly.com/question/11904811
#SPJ1
The balanced equation for the reaction is:
NH₄Cl(s) -> NH₃(g) + HCl(g)
How do I balance the chemical equation?The law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
We can balance chemical equation by obeying the above law.
Now, we shall write the balance equation.
Ammonium chloride => NH₄ClAmmonia => NH₃Hydrogen chloride => HClAmmonium chloride -> Ammonia + Hydrogen chloride
NH₄Cl(s) -> NH₃(g) + HCl(g)
Reactant:
N = 1H = 4Cl = 1Product:
N = 1H = 3 + 1 = 4Cl = 1We can see that the atoms of the elements on both sides of the equation are equal, then the equation is balanced
Learn more about balancing equation:
https://brainly.com/question/12192253
#SPJ1
6) based off of your understanding of atomic structure, which would have a larger radius, f or f-1? explain your answer.
F-1 would have a larger radius because it has one less electron than F, reducing the electrostatic attraction between the nucleus and electrons, making the atom larger.
The radius of an atom is determined by the distance between the nucleus and the outermost electron shell. The number of electrons in the outermost shell, or valence electrons, determines the size of the atom. In this case, F has 9 electrons in its outermost shell, while F-1 has 8 electrons. With one fewer electron, F-1 has less electrostatic attraction between the nucleus and electrons, and thus a larger radius.Valence electrons are the electrons in the outermost shell of an atom that participate in chemical reactions. The number of valence electrons an atom has determines its reactivity and how it will bond with other atoms
Learn more about valence electrons here:
https://brainly.com/question/1255220
#SPJ4
Imagine it's a cold winter night; you've turned the heater on to get toasty and warm. You open the door for a moment and someone yells to close it and says "you're letting the cold in!" Is this statement true or false? i need a paragraph explaining why and evidence.
The statement "you're letting the cold in" is technically false. When you open a door on a cold winter night, you are allowing the warm air inside to escape, which can cause a drop in temperature. However, you are not necessarily "letting the cold in." The cold air is already present outside, and it will continue to exist whether the door is open or closed. In fact, the temperature inside your home may only change slightly, and it will depend on many factors such as the size of the room, the amount of insulation, and the efficiency of the heating system.
The concept of heat transfer, which is the movement of heat from one place to another, helps explain why this statement is false. When you open the door, the warm air inside will move to the cold air outside, which is known as conduction. This transfer of heat will cause the temperature inside to drop until the heat source can warm up the air again. This process will continue as long as the door remains open. So, while opening the door on a cold winter night can cause a drop in temperature, it is not because you are "letting the cold in." Instead, it is because you are allowing the warm air inside to escape.
What would be the theoretical yield in moles for CO2 when there is 63.2 amount of moles of 02 present?
C+02->602
The theoretical yield of CO2 in moles when there is 63.2 moles of O2 present is 63.2 moles.
Describe Chemical Reaction?A chemical reaction is a process in which one or more substances, called reactants, are converted into one or more different substances, called products. This process involves the breaking and forming of chemical bonds between atoms and/or molecules, resulting in a change in the chemical composition of the substances involved.
Chemical reactions can be classified into several different types based on the changes that occur during the reaction, including:
Synthesis or combination reactions: where two or more reactants combine to form a single product.
Decomposition reactions: where a single reactant breaks down into two or more products.
Single replacement or displacement reactions: where one element replaces another element in a compound, resulting in the formation of a new compound.
Double replacement or displacement reactions: where two compounds exchange ions or atoms to form two new compounds.
Acid-base reactions: where an acid and a base react to form a salt and water.
Assuming that the balanced chemical equation is:
C + O2 → CO2
We can see that the stoichiometric ratio between O2 and CO2 is 1:1. This means that for every 1 mole of O2 consumed, 1 mole of CO2 is produced. Therefore, if there are 63.2 moles of O2 present, the theoretical yield of CO2 would also be 63.2 moles.
So, the theoretical yield of CO2 in moles when there is 63.2 moles of O2 present is 63.2 moles.
To know more about moles visit:
https://brainly.com/question/15209553
#SPJ1
A solution of ammonium phosphate is mixed with a solution of aluminum nitrate. If aluminum phosphate is insoluble in water, what is the reaction? Also remember this will need to be balanced.
The balanced chemical reaction is given as follows:
(NH₄)₃PO₄ (aq) + AI(NO₃)₃ (aq) → AIPO₄ (s) + 3NH₄NO₃ (aq)
What is balanced chemical reaction ?A balanced chemical equation is one that has the same number of atoms of each type in the reaction on both the reactant and product sides. In a balanced chemical equation, both the mass and the change are equal.
The law of conservation of mass, which states that "the total mass of all the products of reaction in a chemical reaction equals the total mass of all the reactants," is satisfied by balancing chemical equations.
Thus, A solution of ammonium phosphate is mixed with a solution of aluminum nitrate. If aluminum phosphate is insoluble in water, its reaction is (NH₄)₃PO₄ (aq) + AI(NO₃)₃ (aq) → AIPO₄ (s) + 3NH₄NO₃ (aq).
To learn more about the balanced chemical reaction, follow the link;
https://brainly.com/question/30230799
#SPJ9
do you use the bulb to help dispense the liquid from the pipette? why or why not?
No, the bulb is not used to help dispense the liquid from the pipette.
The bulb is used to create a vacuum which is used to draw liquid into the pipette. The liquid is then dispensed by releasing the vacuum, allowing the pressure of the liquid to push it out through the tip of the pipette. The equation for this is PV = nRT, where P is the pressure, V is the volume, n is the amount of substance, R is the universal gas constant, and T is the temperature.A pipette is a laboratory tool used to measure and transfer accurate volumes of liquid. It is composed of a long, thin tube that is connected to a bulbous reservoir at one end.
learn more about universal gas constant Refer:brainly.com/question/16979521
#SPJ4
Using the data collected identify a trend in the solubility of the cations as you move down group 2 on the periodic table
Answer:ionic radius increases down the
Explanation:
calculate the food coloring concentrations in a standard if 3 ml of .892%(v/v) stock solution was transferred to a 100ml volumetric flask and diluted to volume
We can use the following formula to determine the amount of food colouring present in a standard solution: C1V1 = C2V2. As a result, the final standard solution's food colouring concentration is 0.02676% (v/v).
A homogeneous mixture of two or more substances, in which the solute is uniformly dispersed in the solvent, is referred to as a solution. Solutions exist in a variety of forms, including gases, liquids, and solids. They are crucial in a number of disciplines, such as chemistry, medicine, and technology. To create a solution, one must correctly measure the amounts of the solute and solvent and then completely combine them to create a homogeneous mixture. A solution's concentration can be stated in a number of ways, including molarity, molality, and percent by mass or volume. Solutions can differ from their component elements and compounds in terms of their boiling and melting points, as well as their appearance, flavour, and odour.
Learn more about Solution here:
https://brainly.com/question/2709960
#SPJ4
Which solution will exhibit the greatest increase in boiling point compared to plain water?
A 0.5 M AIN
B 2.0 M K2SO4
C 2.0 M C5H1206
2.0 M K2SO4 will exhibit the greatest increase in boiling point compared to plain water.
What is boiling point?Boiling point is the temperature at which a liquid changes into a gas. It is the temperature at which the vapor pressure of the liquid is equal to the atmospheric pressure. Boiling point is an important physical property of a substance and is dependent on the pressure applied to the liquid. Generally, the higher the pressure, the higher the boiling point of a liquid. For example, water boils at 100°C (212°F) at sea level, but at higher altitudes, where atmospheric pressure is lower, water boils at lower temperatures. The boiling point of a substance is also affected by the presence of other compounds in the liquid, such as impurities. Boiling point is an important property used to identify and characterize materials, and is typically measured with a thermometer.
To learn more about boiling point
https://brainly.com/question/40140
#SPJ1
what is the number of atoms in a volume of 4.48 L of He gas STP?
a) 6.02 x 10^23
b) 3.02 x 10^23
c) 1.34 x 10^25
d) 1.20 x 10^23
Avogadro's number can be multiplied by the number of moles to determine the number of atoms in 4.48 L of He gas at STP is 1.20 x 10²³ atoms.
Option D is correct.
Evaluating :N = N × n
= 6.02 x 10²³ × 0.200 mol
= 1.20 x 10²³ atoms.
Therefore, the answer is 1.20 x 10²³ atoms.
What number does Avogadro have?
In physics and chemistry, Avogadro's number is a fundamental constant that indicates the number of atoms, ions, or molecules in one mole of a substance. It is exactly 6.02214076 x 10²³ particles per mole, as defined.
STP: What is it?Standard Temperature and Pressure is spelled STP. For the purpose of measuring the physical properties of gases, STP is utilized as a reference condition. It has a temperature of 0° Celsius and a pressure of one atmosphere.
Learn more about STP :
brainly.com/question/29796637
#SPJ1
which of the following molecules is a hydrocarbon?
Option C. is a molecule of hydrocarbon.
What are molecules of hydrocarbon?Hydrocarbons are organic compounds made up of only hydrogen and carbon atoms. They are the building blocks of organic chemistry and are the main component of fossil fuels such as coal, oil, and natural gas.
Molecules of hydrocarbons can be simple or complex, and can exist as gases, liquids, or solids. Some common examples of hydrocarbon molecules include methane (CH₄), ethane (C₂H₆), propane (C₃H₈), and butane (C₄H₁₀). Alkanes, alkenes, and alkynes are all types of hydrocarbons that have different chemical and physical properties based on the arrangement of their atoms.
Therefore, the correct answer is as given above. It could then be concluded that only option C is made up of hydrogen and carbon atoms.
learn more about hydrocarbon: https://brainly.com/question/3551546
#SPJ1
The crystallization step of recrystallization removes which category of impurities?
The crystallization step of recrystallization removes soluble impurities from a solid mixture. When a solid is dissolved in a solvent and then allowed to cool, the solubility of the solid in the solvent decreases and the solid crystallizes out of the solution.
Soluble impurities, which are typically more soluble in the solvent than the desired compound, will remain in solution or be incorporated into the crystal lattice of the impure crystals. As a result, the crystals that form during the crystallization step will have a higher purity than the initial solid mixture. Further purification can be achieved through multiple rounds of recrystallization using different solvents or by additional purification methods such as chromatography.
Find out more about chromatography.
brainly.com/question/30630528
#SPJ4
write a net ionic equation for the overall reaction that occurs when aqueous solutions of sodium hydroxide and phosphoric acid (h3po4) are combined.
A net ionic equation describing the total reaction between sodium hydroxide and phosphoric acid (h3po4) in aqueous solutions.
H3PO4(aq) → Na3PO4(aq) + 3H2O(l)
To write the net ionic equation, we need to first write the balanced ionic equation, which shows all the ions in solution that participate in the reaction. The ionic equation for the reaction is:
3Na+(aq) + 3OH-(aq) + H3PO4(aq) → Na3PO4(aq) + 3H2O(l)
Next, we cancel out the spectator ions, which are the ions that appear on both sides of the equation and do not participate in the reaction. In this case, the spectator ions are the sodium ions (Na+) and the hydroxide ions (OH-). The net ionic equation is then:
H3PO4(aq) → Na3PO4(aq) + 3H2O(l)
This equation shows the actual chemical change that occurs in the reaction, which is the transfer of a proton (H+) from the phosphoric acid to the hydroxide ion, forming water and the phosphate ion.
Learn more about ionic equation here:
https://brainly.com/question/29299745
#SPJ4
if there is 5.0x10^-6 grams of As in 1200 grams of drinking water, what is the concentration of As in ppm?
The concentration in ppm is 5.0 ppm.
What is the ppm unit?Ppm stands for "parts per million." It is a unit of measurement that is used to express the concentration of a substance in a mixture. In ppm, the amount of a substance is expressed as the number of parts of the substance per million parts of the mixture.
It is important to note that ppm is a relatively small unit of measurement, and that concentrations in the range of thousands or even millions of ppm can still be harmful to humans and the environment.
Given that the unit microgram/ gram is the same as the ppm then we have that the concentration could be 5.0μg/g or 5.0 ppm
Learn more about PPM:https://brainly.com/question/14598158
#SPJ1
Which two rings have approximately the same bond angle in their favored conformations?
A. Cyclopropane
B. Cyclobutene
C. Cyclohexane
D. Cyclopentane
E. Cycloheptane
Which ring(s) sacrifice bond angle to relieve torsional strain?
A. Cyclobutene
B. Cyclopropane
C. Cycloheptane
D. Cyclopentane
E. Cyclohexane
Which strain(s) are a type of steric interaction?
A. transannular strain
B. ring strain
C. torsional strain
D. bond angle strain
The favored conformations of cyclopropane and cyclobutene have approximately the same bond angle of about 60 degrees.
Cyclopropane and cyclobutane sacrifice bond angle to relieve torsional strain.
Both torsional strain and steric strain are examples of steric interactions.
What is Cyclopropane?The cycloalkane with the chemical formula (CH2)3 is known as cyclopropane. It is made up of three methylene groups (CH2) that are joined together to create a ring.
It is an extremely strained molecule due to the high angle strain resulting from the 60-degree bond angles in the ring. It is used as a starting material in organic synthesis and as an anesthetic in medicine.
Learn about cyclopropane https://brainly.com/question/23971871
#SPJ1
The graph above shows the dramatic decline in monarch butterfly populations since 1995. The population of this butterfly has dropped nearly 90% in a 20 year span. All of the explantations below are true of the monarch butterfly population. Which explanation is NOT due to resource availability?
Responses
A Nectar plants that monarch butterflies feed on during their migration have dwindling populations die to interspecies competition and weather related issues.
B Pesticide use has drastically declined the population of the milkweed plant, the monarch caterpillar's only food source.
C Increased numbers of assasian bugs which prey upon monarch caterpillars have been discovered.
D Loss of habitat and breeding grounds of the monarch butterfly due to development.
Loss of habitat and breeding grounds of the monarch butterfly due to development is the option that is not due to resource availability.
What is interspecies competition ?Interspecies competition refers to a form of competition between different species that are competing for the same limited resources such as food, water, shelter or other necessities required for their survival and reproduction. This competition can occur among individuals of the same species (intraspecific competition) or different species (interspecific competition). In the context of ecology, interspecies competition can be an important factor influencing the distribution and abundance of species in an ecosystem.
To know more about Interspecies competition, visit:
https://brainly.com/question/19826046
#SPJ1
Balance the Equation to Solve. How many grams of Hydrogen (H2) are needed to completely react with 3 moles of Nitrogen (N2)
The molar mass of hydrogen (H2) is 2.016 g/mol. Therefore, the mass of 9 moles of hydrogen is: 9 mol x 2.016 g/mol = 18.144 g. So, 18.144 grams of hydrogen must react with 3 moles of nitrogen completely.
How is ammonia useful?Ammonia is useful in many ways, including fertilizer production, household cleaning product, refrigeration, water treatment, textile production and fuel production.
Why is ammonia a key component of fertilizer?Ammonia is a key component of fertilizer because it contains nitrogen, an essential nutrient for plant growth. Plants require nitrogen to build proteins and other essential molecules. While nitrogen is abundant in the atmosphere, plants cannot use it in its gaseous form. Instead, nitrogen must be converted into a usable form, such as ammonia, through a process called nitrogen fixation.
The balanced chemical equation for the reaction between nitrogen and hydrogen to form ammonia is N2 + 3H2 → 2NH3.
To react completely with 3 moles of nitrogen,
3 moles N2 x 3 moles H2 / 1 mole N2 = 9 moles H2
The molar mass of hydrogen (H2) is 2.016 g/mol. Therefore, the mass of 9 moles of hydrogen is: 9 mol x 2.016 g/mol = 18.144 g
So, 18.144 grams of hydrogen must react with 3 moles of nitrogen completely.
To learn more about moles, visit here:
https://brainly.com/question/14357742
#SPJ1
What volume of a 2.46 M
magnesium nitrate (Mg(NO3)2)
solution would be needed to make
275 mL of a 0.758 M solution by
dilution?
[?] mL of 2.46 M Mg(NO3)2
Converting the volumes to litres is not necessary. Any volume measurement is acceptable as long as it is utilized consistently on both sides.
What is the needed volume to make dilutions?The following formula can be used to create a specific volume of a diluted solution from a stock solution. Where: V1 = Volume of stock solution required to make the new solution, C1V1 = C2V2. C1 is the stock solution's concentration. V2 is the new solution's final volume.
However, as was already said, you need to know the volume in litres if you're trying to figure out how many moles of solute are present.
Data retrieved from the query include the following:
C1 = 2.46 M
V1 =?
C2 = 0.758 M
V2 = 275 mL = 275/1000 = 0.275L
We can definitely determine the volume of the initial solution using the dilution formula C1V1 = C2V2.
C1V1 = C2V2
2.46 x V1 = 0.758 x 0.275
Divide both side by 2.46
V1 = (0.758 x 0.275) /2.46
V1 = 0.0847L
Therefore, 0.0847L volume of a 2.46 Magnesium nitrate (Mg(NO3)2)
solution would be needed to make 275 mL of a 0.758 M solution by
dilution
Learn more about dilutions here:
https://brainly.com/question/28997625
#SPJ1
What is a statement using chemical formulas to describe the identities and relative amounts of the reactants and products involved?
The coefficients in front of the chemical formulas indicate the relative amounts of the reactants and products, and the subscripts within the chemical formulas indicate the ratios of atoms of each element present.
A chemical equation is a statement using chemical formulas to describe the identities and relative amounts of the reactants and products involved in a reaction. A chemical equation typically consists of the chemical formulas of the reactants (the substances being reacted), separated by an arrow, followed by the chemical formulas of the products (the substances produced by the reaction).
For example, the balanced chemical equation for the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O) is:
2H2 + O2 → 2H2O
This equation indicates that two molecules of hydrogen react with one molecule of oxygen to form two molecules of water. The coefficients in front of the chemical formulas indicate the relative amounts of the reactants and products, and the subscripts within the chemical formulas indicate the ratios of atoms of each element present.
To learn more about Chemical equation :
https://brainly.com/question/30087623
#SPJ4
a titration is performed as follows: 6.685 ml of fe2 solution of unknown concentration is charged into a 100 ml beaker 45 ml of deionized water is added the solution is titrated with 0.962 m ce4 solution the equivalence point is reached after 24.995 ml of ce4 solution is added what is the concentration of the fe2 solution? report your response to three digits after the decimal.
To determine the concentration of the Fe2+ solution, we can use the following equation for the reaction between Fe2+ and Ce4+ ions:[tex]Fe2+ + Ce4+ → Fe3+ + Ce3+[/tex]
We know the volume and molarity of the Ce4+ solution (0.962 M), and the volume of Ce4+ solution required to reach the equivalence point (24.995 mL). The volume of Ce4+ solution can be used to find the number of moles of Ce4+ ions present in the solution.
First, convert the volume of Ce4+ solution to liters:
[tex]24.995 mL * (1 L / 1000 mL) = 0.024995 L[/tex]
Next, use the molarity and volume to find the number of moles of Ce4+ ions:
[tex]0.962 M * 0.024995 L = 0.023724 moles of Ce4+[/tex]
Since the equivalence point is reached, the number of moles of Ce4+ ions added is equal to the number of moles of Fe2+ ions in the original solution. We can now use this information to find the concentration of the Fe2+ solution.
First, we need to determine the total volume of the Fe2+ solution and water mixture.
Volume of Fe2+ solution = 6.685 mL
Volume of water = 45 mL
Total volume = 6.685 mL + 45 mL = 51.685 mL = 0.051685 L
Next, use the number of moles of Fe2+ ions and the total volume to find the concentration:
[tex]0.023724 moles / 0.051685 L = 0.462 M[/tex]
So, the concentration of the Fe2+ solution is 0.462 M.
To learn more about concentration refer to this link
https://brainly.com/question/10720472
#SPJ4
how many moles of barium are in a 25.0 g sample of barium? your answer should have three significant figures.
1 mole is equal to 6.023 × 10 ²³ molecules. 0.182 moles of barium are in a 25.0 g sample of barium.
What do you mean by mole ?The term mole is defined as the amount of substance of a system which contains as many elementary entities.
One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.
The mole concept can be used to convert between mass and number of particles.
I mole of any molecule = 6.023 × 10 ²³
1 mole of barium = 137.328g
To calculate moles, divide mass by molar mass yields number of moles.
25.0g barium × 1mol barium 137.328g barium
= 0.182mol barium
Thus, 0.182 moles of barium are in a 25.0 g sample of barium.
To learn more about the mole, follow the link;
https://brainly.com/question/26416088
#SPJ1
where can oxygen that has been ionized up to 5 times be typically found? question 2 options: h-ii regions ultra-hot interstellar gas clouds neutral hydrogen clouds emission clouds molecular clouds
In Ultra-hot Interstellar gas clouds can oxygen that has been ionized up to 5 times be typically found.
Ultra Hot Interstellar Gas Clouds:
Although the 10,000 K temperature of the H II region may seem warm, it is not the hottest phase of the interstellar medium. Some of the interstellar gas is a million degrees hot, even though there are no nearby visible sources of heat.
The discovery of this super-hot interstellar gas came as a great surprise. Before launching observatories into space that could see ultraviolet and X-ray radiation, astronomers assumed that most of the interstellar regions were filled with hydrogen at temperatures not higher than those found in the H II region. However, telescopes launched above Earth's atmosphere captured an ultraviolet spectrum that included interstellar lines formed by five times ionized oxygen atoms. It takes a lot of energy to knock 5 electrons off their orbits around the oxygen nucleus.
Astronomers estimate that a supernova explodes somewhere in the galaxy about every 100 years. On average, supernova impacts pass through some point in the galaxy once every few million years. These thrusts support some interstellar space filled with gas at temperatures of millions of degrees and constantly disturb the cooler gas to maintain constant turbulent motion.
Complete Question:
Where can oxygen that has been ionized up to 5 times be typically found?
a. Ultra-hot Interstellar gas clouds
b. Molecular clouds
c. H-II regions
d. Neutral hydrogen clouds
e. Emission clouds
Learn more about Ultra-hot Interstellar gas clouds :
https://brainly.com/question/13830668
#SPJ4
a pipet is used to measure out 10 ml of water. if the mass of this volume of water is 9.990 g and the density of water is given as 0.9978 g/ml, what is the actual volume of water measured out?
the actual volume of water measured out is 10.02 ml, which is slightly higher than the intended volume of 10 ml. This could be due to various factors, such as the presence of air bubbles or human error in reading the pipet
To determine the actual volume of water measured out, we need to use the given information about the mass and density of water.
First, we can use the density formula to calculate the mass of 10 ml of water:
density = mass / volume
Rearranging the formula, we get:
mass = density x volume
Substituting the given values, we get:
mass = 0.9978 g/ml x 10 ml = 9.978 g
This means that the mass of the water measured out is 9.978 g.
However, the question states that the mass of the measured water is 9.990 g. This means that there is an additional mass of water that was inadvertently added or that there is an error in the measurement.
To find the actual volume of water measured out, we can use the following formula:
actual volume = measured mass / density
Substituting the given values, we get:
actual volume = 9.990 g / 0.9978 g/ml = 10.02 ml
Therefore, the actual volume of water measured out is 10.02 ml, which is slightly higher than the intended volume of 10 ml. This could be due to various factors, such as the presence of air bubbles or human error in reading the pipet
To know more aboutactual volume click here:
brainly.com/question/24179676
#SPJ4
