in the town of centralburg (figure 1), which is laid out in a uniform block grid, the grocery store is three blocks east and four blocks north of the post office. which of the following is a correct equation for the quantities represented in this scenario?

Answer:

  3 ft

Explanation:

You want the length of a pendulum that has a period of 1.9 seconds.

The period of a pendulum is given by the formula ...

  T = 2π√(L/g)

Solving for the length, we find ...

  L = g(T/(2π))²

Using the given period, we find the length to be ...

  L = (32 ft/s²)(1.9 s/(2·3.14))² ≈ 2.93 ft ≈ 3 ft

To the nearest foot, the length of the pendulum is 3 ft.

The law working behind the balloon moving forward when the air escapes from it is Newton's Third Law of Motion.

Newton's Third Law of Motion states that for every action in nature, there is an equal and opposite reaction. If object A exerts a force on object B, object B also exerts an equal and opposite force on object A.

When a fully inflated balloon is released, the air molecules coming out of the balloon to strike the outside air molecules or it pushes the outside air molecules and the outside air molecule pushes the balloon back. The force experienced by the balloon is called thrust.

This is the same principle used for the movement of Rockets in space.

Learn more about Newton's Law of Motion here:

https://brainly.com/question/28171613

The  final angular velocity of the  rigid bar  is  5.2325 rad/s.

The angular impulse that was applied to the rigid bar  is 4.186 N-m-s.

As a vector number that indicates an object's angular speed or rotational speed as well as the axis around which it is spinning, angular velocity is defined as the rate of change of angular displacement.

The  final angular velocity  of the  rigid bar = (4.55 N-m × 0.92 s)/(0.8 kg-m²)

= 5.2325 rad/s.

The angular impulse that was applied to the rigid bar = (4.55 N-m × 0.92 s)

= 4.186 N-m-s.

Learn more about angular velocity here:

https://brainly.com/question/29557272

#SPJ1

more of its gravitational potential energy becomes translational kinetic energy and less becomes rotational. slides down the ramp without friction.

= 1/2 m v2 Kinetic energy is directly proportional to the mass of the object and to the square of its velocity: K.E. = 1/2 m v2. If the mass has units of kilograms and the velocity of meters per second, the kinetic energy has units of kilograms-meters squared per second squared.

The amount of potential energy depends on the object's mass, the strength of gravity and how high it is off the ground. When you drop the object, this potential energy is converted into kinetic energy, or the energy of motion. Kinetic energy depends on an object's mass and its speed.

to know more about kinetic energy visit :

https://brainly.com/question/26472013

#SPJ1

Its elastic acceleration energy is converted more into translational kinetic energy than into rotational energy. glides without resistance down the ramp.

= 1/2 m v2 The relationship between kinetic energy and an object's mass and square from its velocity is direct: K.E. = 1/2 m v2. The kinetic energy is measured in g / kg body equation per second squared if the mass is measured in kilograms or the velocity is measured in meters per second.

The mass, gravitational pull, and height above the earth all affect how much potential energy an item has. This amount of energy is transformed into kinetic energy, and or energy that moves an item when it is dropped.

To know more about kinetic energy visit :

brainly.com/question/26472013

#SPJ1

These two vectors can be added to provide the net acceleration, same as in a Cartesian coordinate system.This is dispensing with the fixed X and y axis that you are used to to demonstrate this coordinate system.

How the car is accelerating as it rounds a curve?

Total acceleration vector: pointing towards the center of the curve, as the car is accelerating towards the center.

Radial acceleration vector: also pointing towards the center of the curve, as the car is accelerating towards the center.

Tangential acceleration vector: pointing parallel to the path of the car, as the car is changing direction while maintaining a constant speed.

($b$) A car is going a constant as it rounds a curve of constant radius:

Total acceleration vector: pointing towards the center of the curve, as the car is changing direction while maintaining a constant speed.

Radial acceleration vector: also pointing towards the center of the curve, as the car is changing direction while maintaining a constant speed.

Tangential acceleration vector: zero, as the car is maintaining a constant speed.

($c$) A car slows down while rounding a curve of constant radius:

Total acceleration vector: pointing towards the center of the curve, as the car is slowing down towards the center.

Radial acceleration vector: also pointing towards the center of the curve, as the car is slowing down towards the center.

Tangential acceleration vector: pointing opposite to the path of the car, as the car is slowing down while changing direction.

To learn more about vector refer:

https://brainly.com/question/29740341

#SPJ4

According to the above statement, each charge has a magnitude of 2.23μC according to Coulomb's law.

When two items behave as point charges, the force between them may be accurately described by the Coulomb's law equation. When interacting with other charged objects, a spent conducting sphere behaves as though its whole charge were concentrated in its center. According to Coulomb's law, the force F between two triangular charges, Q1 and Q2, in a void is proportional to the inverse of their separation, r, and proportional to their product, Q1.

Coulomb's law states:

F = KQ²/r²

18 = (9*10⁹)*Q²/0.07²

Q = 2.23*10⁻⁶C or 2.23 μC

To know more about Coulomb's law visit:

https://brainly.com/question/506926

#SPJ4

The power required to move a charge in opposition to an electric field is known as electric potential energy.

The power required to move a charge in opposition to an electric field is known as electric potential energy. A charge must be moved through a greater electric field with more energy, but it also must be moved through a weaker electric field with more energy.

Potential energy will be associated with each charged sphere's individual charge.

K!  = 8πε 0 1 ​

rsq 2

The electric field of the other sphere's potential energy contained in one object is K 2 = 4 0.

1R q 2

Consequently, the P.E. strored in the system of object at U=[2K 1 + K 2 ]= 4 0.

​q 2​  [ R 1  + 1 ]

To learn more about electric potential energy  refer to:

https://brainly.com/question/14306881

#SPJ4

The value of θ for which the bead will remain stationary relative to the rotating wire while assuming bead slides without friction is 2π radians.

For the bead to remain stationary relative to the rotating wire, the centripetal force provided by the wire must be balanced by the gravitational force acting on the bead. The gravitational force acting on the bead is given by the weight of the bead, which is:

Fg = mg

where m is the mass of the bead (150 g) and g is the acceleration due to gravity (9.8 m/s^2).

The centripetal force provided by the wire is given by:

Fc = mv^2 / r

where m is the mass of the bead, v is the velocity of the bead and r is the radius of the wire (20 cm).

For the bead to remain stationary relative friction to the wire, the gravitational force must equal the centripetal force.

mg = mv^2 / r

The velocity of the bead v is related to the angular velocity of the wire by v = r * ω

where r is the radius of the wire, and ω is the angular velocity of the wire (3 revolutions per second)

so we can substitute v = r * ω in the previous equation:

mg = m(r * ω)^2 / r

mg = mr^2 * ω^2

g = r * ω^2

Now we can find the angle θ for which the bead will remain stationary relative to the rotating wire by using the fact that:

θ = ω * t

where θ is the angle in radians, ω is the angular velocity and t is time in seconds. We know that the angular velocity of the wire is 3 revolutions per second, which is equal to 3*2π radians/second. We also know that the bead is on the wire's semicircle, so the bead will complete half a revolution in a time of 1/3 second.

So, the angle θ = ω * t = 3*2π * 1/3 = 2π radians

So, the bead will remain stationary relative to the rotating wire when it is at an angle of 2π radians (360 degrees) from the vertical axis of rotation.

To know more about friction please refer: https://brainly.com/question/17237604

#SPJ4

At the surface of Earth, the ambient atmospheric pressure is 1013254 Pa. The weight of the atmosphere on Earth is 5.322 * 1016 kg.

The magnitude of force applied to a certain region is referred to as pressure. So either a strong force or a strong force applied over a short area can cause a lot of pressure (or do both).

The atoms and molecules that comprise the many layers of the atmosphere are continually moving in arbitrary directions. Despite their modest size, when they hit a surface, they apply pressure that humans perceive as a force.

atmospheric pressure = 1013254 Pa

radius of Earth = 6.4 * 10⁶ m

gravity = 9.8 m/s²

surface area of a sphere = 4π radius²

surface area of earth = 4 * 3.14 * ( 6.4 *10⁶ )²

= 5.14719 * 10¹⁴ m²

mass of the atmosphere = ( 1013254 pa * 5.14719 * 10¹⁴ m²) / 9.8

= 5322 * 10 ¹⁶ gm

= 5.322 * 10¹⁶ kg

To know more about pressure visit:

https://brainly.com/question/912155

#SPJ4

Both hammer and nail hit the ground at the same time because acceleration due to gravity is same for everything on Earth surface.

The acceleration an object experiences as a result of gravitational force is known as acceleration due to gravity.

M/s² is its SI unit. Its vector nature—which includes both magnitude and direction—makes it a quantity. The unit g stands for gravitational acceleration. At sea level, the standard value of g on earth's surface is 9.8 m/s².

As acceleration due to gravity is same for everything on Earth surface, both hammer and nail hit the ground at the same time.

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ1

Answer:

(Question)  Melissa is working on the roof of her house. She drops a hammer and a nail. Why do both objects hit the ground at the same time?

(Answer)  Earth’s gravity causes both objects to fall at the same rate.

(Question)  Which of the following statements about gravitational mass is true?

(Answer)  Gravitational acceleration is irrespective of mass.

(Question)  Two objects fall from an apartment window sill at the same time. Object 1 lands on the sidewalk in 3.6 seconds. Object 2 lands on the sidewalk in 3.3 seconds. What can be concluded about the objects?

(Answer)  Object 1 has more surface area than Object 2.

(Question)  A company uses drones to fly food to people in regions that have experienced natural disasters. The food is packed in boxes that are attached to parachutes. How can the company change the design of its parachute to reduce the number of boxes that are damaged when they hit the ground?

(Answer)  The company can design a parachute with more surface area.

(Question)  Students want to design an experiment to study gravity. They decide they will drop four objects with the same mass from the top of their school’s bleachers. They will time how long each object takes to reach the ground. How can they improve confidence in the experiment’s results?

(Answer)  Drop each object 10 times and use the average of each object’s fall times.

Explanation:

i just finished the quick check

The normal force (in n) acting on an astronaut of mass 88.4 kg, including her space suit is  M=6612.32N direction upwards.

One kind of ground response force is the normal force. The entire ground response force can be broken down into two parts: a normal force perpendicular to the ground and a frictional force parallel to the ground if the person stands on a slope without sinking into the ground or sliding downhill. Another typical scenario is when an object strikes a surface at a certain speed and the surface is able to survive the impact. In this case, the normal force causes a quick deceleration, which depends on the flexibility of the surface and the object.

Given, a=65m/[tex]s^{2}[/tex]

mass=88.4Kg

from the condition ,

let M be the normal force

M=ma

M=mg+ma

M=m(g+a)

M=88.4(9.8m/[tex]s^{2}[/tex]+65m/[tex]s^{2}[/tex])

M=6612.32N direction upwards

Learn more about normal force

brainly.com/question/13340671

#SPJ4

According to Cavalieri's principle, if two solids are sandwiched between two parallel planes and any plane perpendicular to these planes meets them with cross-sections of equal area, the solids' volumes are also equal.

When used on increasingly intricate shapes, Cavalieri's approach demonstrates its effectiveness (or when the rectangles are allowed to become infinitely thin.) Two solids (planar figures) must have equal volumes and the same heights and areas (lengths) on every level according to a brief formulation (areas). The idea represented an early step toward what is now called the Integral Calculus.

Let's identify a relationship between the volumes of a cylinder, a cone, and a sphere as an amazing use of Cavalieri's principle.

Assume that a cylinder's height is equal to the radius of its base (r) and that the cylinder has an inscribed cone with the same base and height as the cone.

The area of the cone's cross-section at level y is equal to y², calculated from the bottom up. The area of the remaining ring (at level y) is equal to (r² - y²) because the cross-section of the cylinder, regardless of its height, equals r². This is the exact area of the cross-section of the hemisphere of radius r at level y according to the Pythagorean theorem. According to Cavalieri's principle, the cylinder's volume less the cone's volume equals the hemisphere's volume.

A cone's volume is one-third of a cylinder's volume, which is defined as Base × Height. The volume of the hemisphere is, therefore 2/3 that of the cylinder, and the volume of the entire sphere is 4/3 that of the cylinder. The latter is r³, hence the sphere's volume is 4/3 r³.

To know more about Cavalieri's principle from the link

brainly.com/question/2279671

#SPJ4

Dipole is the force that is most prominently felt at the glass's surface.Hexane interacts with the glass in a non polar  manner, producing only week adhesive interactions.

The complete question is,

Water rises 1.4 cm when a thin glass tube is inserted into it.Hexane barely rises 0.4 cm when the same tube is submerged in hexane.To best describe the distinction, complete the phrases.Place the words in the proper sentence blanks.

Before submitting your response, make sure all of your sentences are complete.

1. The strongest force detected at the glass surface is:

2. Water is __________ and interacts with only weak hydrogen-bonding polar glass to produce sticky contacts.

3. Hexane reacts and is _____, causing sticky interactions that are ____ with the glass.

To learn more about DIPOLE refer

https://brainly.com/question/17072532

#SPJ4

The quarterback in this scenario ran at a speed of 8 m/s and threw the ball with a speed of 15 m/s.

To learn more about quarterback run refer:

brainly.com/question/2193101

#SPJ4

Amongst the refrigerant techniques given in the options, all of them are correct and can be used to speed up recovery.

A brief explanation of all the refrigerant techniques to increase the speed of recovery:

a. Cooling the recovery cylinder: This technique involves placing the recovery cylinder in a cool environment, such as a cooler or refrigerator, before beginning the recovery process. This can help to speed up the process by reducing the temperature of the refrigerant inside the cylinder, making it more dense and easier to pump out.

b. Recovery from both sides of the system at once: This technique involves connecting the recovery equipment to both the high and low side of the refrigerant system at the same time. This allows for faster recovery by allowing the refrigerant to flow in both directions simultaneously.

c. Use large-diameter hoses: Using larger diameter hoses can also help to speed up the recovery process. This is because larger hoses provide less resistance to the flow of refrigerant, allowing it to be pumped out more quickly.

d. Heating the refrigerant system: This technique involves heating the refrigerant system before beginning the recovery process. This can help to speed up the process by increasing the pressure of the refrigerant, making it easier to pump out.

All these techniques can help to speed up the refrigerant recovery process by making it easier to pump out the refrigerant, and by allowing for faster flow of the refrigerant. However, safety measures should be taken before applying these techniques, and precautions should be taken to avoid over-heating or over-cooling the system, as this can cause damage to the equipment.

Learn more about refrigerant techniques:

https://brainly.com/question/12950669

#SPJ4

A force of 3N will stretch the rubber a distance of 0.015 m. It takes 0.045 J of work to stretch the rubber band.

According to Hooke's law, the amount of force used to stretch an elastic item is proportional to that force. The object won't rebound if it is stretched too far, though. Only when an elastic object is not overextended does Hooke's Law hold true.

The nature of a balloon is elastic. It expands when air molecules are blasted through it. Similar to that, it gets smaller when it is expelled. It operates according to Hooke's law because the balloon's expansion and compression depend on the force with which air is pumped into it.

From Hooke's law, as long as the elastic limit is not exceeded the extension is directly proportional to the force applied.

(a)

F = Ke

F = force

K = force constant

e = extension

So;

2 N = K(1 × 10^-2) m

K = 2 N /(1 × 10^-2) m

K = 200 N/m

Hence;

3N = 200 N/m × a

Where a is the extension in meters

a = 3N/200 N/m

a = 0.015 m

(b)

Work (w) = Force (f)×distance (a)

Work (w) = 3 N×0.015

Work (w) = 0.045 J

To learn more about Hooke's law visit:

brainly.com/question/3355345

#SPJ4

Equation to show the relationship between gravitational field on a planet and the acceleration when the mass or distance is varied : a = g = G * (M/r^2)

In physics, gravitational field is a model that is used to explain influences that a massive body extends into the space around itself, producing force on another massive body.

The gravitational field strength on a planet;

F = G * (Mm / r^2)

F is gravitational force, G is the gravitational constant (approximately 6.67 x 10^-11 N*(m/kg)^2), M is mass of the planet, m is mass of the object being affected by the gravitational force, and r is distance between the centers of two masses.

F/m = G * (M/r^2)

As, a = g = G * (M/r^2)

This equation shows the relationship between gravitational field on a planet and the acceleration experienced by an object due to that field. It shows that acceleration is directly proportional to mass of the planet and inversely proportional to the square of distance between the centers of the two masses.

To know more about gravitational field, refer

https://brainly.com/question/28437652

#SPJ4

Explanation:

The reaction you are describing is the reaction between ammonia gas (NH3) and hydrochloric acid gas (HCl). When these two gases come into contact, they diffuse and react to form a white solid deposit of ammonium chloride (NH4Cl).

If the experiment was performed at high temperature, you would expect it to take a shorter time for the white deposit to form. This is because at higher temperatures, the gases will have more kinetic energy and move faster, increasing the rate of collision between the gases and therefore the rate of the reaction. As a result, the white deposit will form more quickly at high temperatures than it would at lower temperatures.

It's also important to note that the rate of reaction also depends on the concentration of the reactants. So if the concentration of the reactants is increased, the reaction rate will increase and the white deposit will form faster.

In summary, the reaction between ammonia gas and hydrochloric acid gas forms a white solid deposit of ammonium chloride. The rate of reaction is affected by temperature and concentration of reactants, at higher temperatures and higher concentration, the white deposit will form faster.

The height of the house in feet would be 19.45.

The distance in metres can be converted to feet by multiplying by 3.281 (1 m = 3.281 ft).

So the height of the house in feet =distance (in meters) × 3.281

Height of the house=1/2× 9.8×1.1²

                                =5.929 m

Height of the house in feet= 5.929×3.281= 19.45 feet

Please note that the result of this calculation is an approximation, and real-world factors such as air resistance may affect the actual time it takes for the stone to fall.

Acceleration due to gravity is 9.8 m/s² and time for the stone to fall is 1.1 seconds, can be used to calculate the height of the house. Calculating the distance fallen in metres, then multiplying it by 3.281 to get the distance in feet. The exact amount of time it takes for the stone to fall may vary due to external factors like air resistance.

Learn more about gravity:

https://brainly.com/question/14874038

#SPJ4

The directions of the centripetal force acting on the car and the velocity of the car is east. Thus, option d is correct.

Velocity is a measure of the rate and direction of an object's change in position. It is a vector quantity, having both magnitude and direction. Velocity is commonly described in terms of speed, distance traveled, and direction of travel. Velocity can be calculated by dividing the displacement (change in position) by the time taken for the displacement to take place. The SI unit for velocity is meters per second (m/s).

This force is generated by the car's acceleration inwards and is responsible for the car's circular motion. The velocity of the car is the speed of the car in the direction of the circle's circumference. The magnitude of the velocity is determined by the radius of the circle and the angular velocity of the car. The magnitude of the centripetal force is equal to the weight of the car times the square of the velocity divided by the radius of the circle.

To know more about velocity click-

brainly.com/question/24445340

#SPJ4

Complete question:

A car moves with a constant speed in a clockwise direction around a circular path of radius r, as represented in the diagram When the car is in the position shown, its acceleration is directed toward the?

a. north

b. south

c. west

d. east

People couldn't walk if it weren't for the force of friction. Please select the response that, among the given options, is truest.

the statement is true.

A solid thing cannot move over another solid object without encountering friction. The four basic types of friction are fluid friction, rolling friction, sliding friction, and static friction.

Friction is defined as the rubbing of two bodies together. the resistance to relative motion of two bodies in contact, such the friction of sandpaper on wood. Oil lowers friction in an automobile engine.

To know more about friction visit:

https://brainly.com/question/13000653

#SPJ4

Compared to the magnitude of force required to stop the car in 12 seconds, magnitude of the force required to stop the car in 6.0 seconds is : (3) the same.

In physics, force is an influence that changes the motion of an object.

Force is : F = m * a, where m is mass of the object and a is acceleration.

Given, distance traveled is zero (the car stops), the initial velocity is 20 m/s and time is 12 seconds.

As, d = vt + (1/2)at^2

So, a = 2d/t^2 - v^2/d

a = 2*0/(12^2) - (20^2)/0 = 0 - 400/0 = undefined

a = 2*0/(6^2) - (20^2)/0 = 0 - 400/0 = undefined

As acceleration is undefined in both case, we say that the force required to stop the car in 6.0 seconds is same as force required to stop the car in 12 seconds.

So, answer is (3) the same.

To know more about force, refer

https://brainly.com/question/12785175

#SPJ4

Fields provide a consistent framework for understanding and describing different types of forces, such as strength, direction, propagation, attenuation, and mathematically describing the behavior of forces.

Gravitational force is the force of attraction that exists between two objects that have mass. It is the weakest of the four fundamental forces in nature, but it is the most influential force when it comes to the large-scale structure of the universe. It is responsible for keeping planets and stars in orbit around one another, and also for the formation of galaxies and other large structures.

We explain these forces using fields because fields provide a consistent framework for understanding and describing different types of forces. Fields provide a way to represent the strength and direction of a force at any given point in space. They also provide a way to represent the interactions between different types of forces, such as how magnetic and electric fields interact to create electromagnetic forces. Furthermore, fields provide a way to represent how forces can propagate and attenuate over distances, allowing us to understand how things interact from afar. Finally, fields provide a way to mathematically describe the behavior of forces, allowing us to make predictions about how things interact in different situations.

To know more about magnetic field, visit

brainly.com/question/11514007

#SPJ4

The complete question is: What is a reason to explain the gravitational, magnetic, and electric forces using the fields?

Question:1. What physical properties can cause an object to resonate?-mass, color, and density-shape, temperature, energy-shape, composition, and length-color, density, and composition

2. Which statement about resonance is correct?-Resonance causes the amplitude of vibrations to decrease.-Resonance causes the amplitude of vibrations to increase.-Resonance does not affect the amplitude of vibrations.-Resonance causes frequency to incease3.How can you make the natural frequency of a string increase?-decrease the tension of the string-cut the string-tighten the string-loosen the string4. A student wants to make the natural frequency of a tube increase. How can the student accomplish this?-Decrease the length of the tube-Change the composition of the tube-Make holes in the tube-Increase the length of the tube5.Which factor determines the natural frequency of an object?-color-elasticity-length-pressure

Explanation:

answer is 1,2,3,4,5,

The force is independent of time, the object's position, and its velocity. start with the definition of jobs completed by a force in general The force is conservative, as demonstrated by F.dr. = 15.0J+20.0J=35.0J

The displacement an object / particle experiences with regard to time is expressed vectorially as velocity. The meter per second (m/s) is the accepted unit of velocity magnitude, sometimes referred to as speed. Alternately, velocity magnitude can be expressed in centimeters per second (cm/s).

By calculating the average speed over a brief period of time that includes the instant in question, one can estimate the speed of a point anywhere at given instant. For precisely calculating the values of a instantaneous velocity, Isaac Newton developed the differential calculus.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ4

The ideal speed to take a 75 m radius curve banked at a 10.0° angle is 21.82 m/s.

The formula for the maximum vehicle velocity on banked roads can be used to determine the banking angle. The equation for the angle of banking, t a n = v 2/ r g, is obtained by squaring the equation on both sides and rearrangement.

The curved path's banking angle is given as

tan θ = v² / rg

Here, v is the linear speed, r is the curved path's radius, is the bank angle, and g is the acceleration brought on by gravity.

θ = 10.0°, r = 75 m, and g = 9.8 m/s2 are our values.

By replacing these numbers in the formula above, we obtain

tan 10 = v2 / 75m × 9.8m/m/s²

v² = 476.54

v = √476.54 = 21.82 m/s

Thus, 21.82 m/s is the optimal speed.

To learn more about angle of banking from given link

https://brainly.com/question/13257080

#SPJ1

Solve by multiplying one half by the drug's 10.5 newtons per millimetre and by its square root, 0.15 millimetre.

To learn more about muscles refer to:

https://brainly.com/question/13920046

#SPJ4

The number of pulse beats per minute is referred to as pulse rate. A resting person's heartbeat typically ranges from 72 to 80 beats per minute.

To learn more about pulse beats refer to:

https://brainly.com/question/11245663

#SPJ1

It pumps roughly 25-85 ml of blood every beat for youngsters and 55-80 ml (1/3 cup) per beat for adults.

To learn more about heart beat refer to :

https://brainly.com/question/14885673

#SPJ1

The impulse-momentum theorem states that the change in momentum of an object is equal to the impulse applied to it. The a stone falling vertically to pick up speed, going from 4.8 m/s to 12.0 m/s.

Δp = F * Δt

where Δp is the change in momentum, F is the net force acting on the stone, and Δt is the time interval.

Since the stone is falling vertically and only gravity is acting on it, the net force is equal to its weight, which is given by the equation:

F = m * g

where m is the mass of the stone and g is the acceleration due to gravity (9.8 m/s^2).

Now we can find the change in momentum by subtracting the initial momentum from the final momentum:

Δp = pf - pi

= (m * vf) - (m * vi)

= m * (vf - vi)

where vi and vf are the initial and final speeds (4.8 m/s and 12.0 m/s), and m is the mass of the stone.

Substituting the expressions for F and Δp into the impulse-momentum theorem, we get:

m * (vf - vi) = F * Δt

m * (12.0 - 4.8) = m * g * Δt

7.2 = 9.8 * Δt

Finally, we can solve for Δt by dividing both sides of the equation by 9.8:

Δt = 7.2 / 9.8

Δt = 0.735 seconds

So it takes the stone 0.735 seconds to increase its speed from 4.8 m/s to 12.0 m/s.

To learn more about impulse momentum visit:

brainly.com/question/28584774

#SPJ4

The impulse-momentum theorem states that the change in momentum of an object is equal to the impulse applied to it. It takes the stone 0.735 seconds to increase up speed, going from [tex]4.8 m/s to 12.0 m/s.[/tex]

Δp = F * Δt

where Δp is the change in momentum, F is the net force acting on the stone, and Δt is the time interval.

Since the stone is falling vertically and only gravity is acting on it, the net force is equal to its weight, which is given by the equation:

F = m * g

where m is the mass of the stone and g is the acceleration due to gravity (9.8 m/s^2).

Now we can find the change in momentum by subtracting the initial momentum from the final momentum:

Δp = pf - pi

= (m * vf) - (m * vi)

= m * (vf - vi)

where vi and vf are the initial and final speeds (4.8 m/s and 12.0 m/s), and m is the mass of the stone.

Substituting the expressions for F and Δp into the impulse-momentum theorem, we get:

m * (vf - vi) = F * Δt

m * (12.0 - 4.8) = m * g * Δt

7.2 = 9.8 * Δt

Finally, we can solve for Δt by dividing both sides of the equation by 9.8:

Δt = 7.2 / 9.8

Δt = 0.735 seconds

So it takes the stone 0.735 seconds to increase its speed from 4.8 m/s to 12.0 m/s.

To learn more about impulse momentum visit:

brainly.com/question/28584774

#SPJ4