In this lab, you'll practice creating classes and objects, using ArrayList objects, and working
with interacting objects (with some nice visuals). Even better, you'll be working with circles,
widely considered to be the roundest of all two-dimensional shapes.
1. Import the starter code to begin. Instructions (if needed), for your IDE of choice:
a. Jgrasp:
i. Download the starter code folder from the website (Download -> Direct download).
ii. Extract (unzip) the downloaded folder (right-click -> Extract all).
iii. Copy the entire (unzipped) folder to your H: drive; rename it in the usual fashion.
b. Eclipse:
i. In Eclipse, create a new Java project named in the usual fashion.
ii. Download the starter code folder from the website (Download -> Direct download).
iii. Extract (unzip) the downloaded folder (right-click -> Extract all).
iv. Drag and drop the unzipped materials as follows:
1. Drag the source (*.java) files into the "src" folder.
2. See here for help (don't worry about text files): youtu.be/LOSICIeP6Ko
2. Create a class Circle.java which is a simple abstraction of an on-screen circle (image). A Circle
should (initially) have the following:
int x and int y The center point of the circle's on-screen location. These values represent
the circle's (initial) location on screen.
int radius The radius of the circle.
Color color The color of the circle. Color is a class that is built into Java, a software
abstraction of color. You can create a new color using Color's
three-parameter constructor (e.g. new Color(50, 100, 150)), where
each integer is a value 0-255 (corresponding to red, green, and blue
components, respectively). There are also pre-built colors in the Color class
that you can use, e.g. Color.RED or Color.BLACK. Import:
java.awt.Color.
3. Write Circle's 4-parameter constructor. Give the parameter variables real good names.
4. A Circle is responsible for drawing itself. Write a void draw() method that displays the circle on
screen using the StdDraw.java graphics library (included in starter code). Use the following:
StdDraw.setPenColor(color); //set the current color of the drawing window
StdDraw.filledCircle(x, y, radius); //draw a filled circle at , diam of radius*2
Page 1 of 5
5. The CircleAnimations class performs some on-screen animations using Circle objects; we say
CircleAnimations is a client of the Circle class.
a. CircleAnimations' constructor has been written for you. Nice! Look it over so you know what
variables a CircleAnimations object will have. For example, this class maintains a list of all the
circles currently in the animation.
6. In CircleAnimations, write a method void drawCircles() that will iterate through all objects in
the circles list and draw them to the screen. The drawCircles method should be called last
from any method that adds circles to the list or makes changes to the circles so that the results
appear on screen. You don't need to test this method quite yet.
7. In CircleAnimations, write a method void addCircles() that will add three randomly colored
circles with random locations to the circles list. Note: The size of the drawing window is saved
into CircleAnimations' size instance variable. Choose a random radius range you feel best
represents you as a person.

Choose the travel lane that has the least amount of traffic and stay in it until you need to turn, pass another vehicle, or avoid a hazard.

an engine-powered vehicle that is often on wheels and used to transport people or objects, especially on land: This night, a truck driver perished when his vehicle overturned. Examples of road vehicles include cars, buses, and trucks. Among farm vehicles are tractors.

You can go wherever you must travel for work if you have a car. If you need to make a quick grocery run, you don't need to worry about the weather slowing down public transportation. Using a car allows you to complete several daily duties. If your schedule is busy

To know more about vehicle visit:

https://brainly.com/question/29491014

#SPJ4

Molar Flow Rate of Ethene,  Dry Air and Carbon Dioxide = 0.3577 mol/s

Molar Flow Rate of Water = 0.3577 mol/s * (2 mol H₂O/1 mol C₂H₄) = 0

Molar flow rate is the volumetric flow rate of a fluid divided by the molar mass of the fluid. It is typically expressed in moles per second (mol/s). It is a measure of the amount of a substance passing through a given surface area per unit time.

H₄ Molar Flow Rate of Ethene = 10.0 kg/s * (1 mol/28.05 g) = 0.3577 mol/s

Molar Flow Rate of Dry Air = 0.3577 mol/s * (1 mol C₂H₄/1 mol O₂) = 0.3577 mol/s

Volumetric Flow Rate of Air = 0.3577 mol/s * (22.4 L/mol) * (1 m3/1000 L) = 0.00801 m3/s

Average Molar Mass of Air = (0.7820 mol N₂ * 28.01 g/mol) + (0.2090 mol O2 * 32.00 g/mol) + (0.0090 mol Ar * 39.94 g/mol) = 28.99 g/mol

Molar Flow Rate of Carbon Dioxide = 0.3577 mol/s * (1 mol CO₂/1 mol C₂H₄) = 0.3577 mol/s

Molar Flow Rate of Water = 0.3577 mol/s * (2 mol H₂O/1 mol C₂) = 0

To learn more about Molar Flow Rate refer :

https://brainly.com/question/19425106

#SPJ4

This question is related to MySQL query and what results it can give.

MySQL provides information on the number of rows returned and the query's execution time, which helps you get a general sense of the server's performance.

Because they reflect wall clock time rather than CPU or machine time and are influenced by things like server load and network latency, these figures are not exact.

Based on Structured Query Language, MySQL is an open source relational database management system (RDBMS) sponsored by Oracle (SQL).Almost every platform, including Linux, UNIX, and Windows, supports MySQL.

Any command used to get data from a table in MySQL is known as a query. Querying, filtering, sorting, joining tables, grouping data, and editing data are all possible with MySQL.

To know more about MySQL visit:

https://brainly.com/question/13267082

#SPJ4

The rate of change of the radius with time is a partial derivative of the rate of change of volume with time. At the instant the height of the cylinder is 6 feet is the radius is decreasing at a rate of approximately 4.634 ft./s.

The height of the cone is 27 meters when the radius of the cone is 55 meters and the volume of the cone is 733 cubic meters.The radius of a cylinder is increasing at a constant rate of 3 meters per second, and the volume is increasing at a rate of 108 cubic meters per second.

Cones grow in size at constant rates of 9 meters per second for the radius and 1631 cubic meters per second for the volume.

Therefore, The height of the cone is 27 meters when the radius of the cone is 55 meters and the volume of the cone is 733 cubic meters.

Learn more about height on:

https://brainly.com/question/29117133

#SPJ1

Amount= Percentage×GrossSalary/100 and then the below formula is used. This is a simple arithmetic calculation that will give you your desired result i.e., the net salary or salary-in-hand.

Annual Tax refers to the amount of real property tax owed on a property for a fiscal year, as calculated after deducting any amounts from which the property is exempt or whose payment has been suspended in accordance with the applicable laws.

A tax is a mandatory payment or charge that is gathered by local, state, and federal governments from citizens or companies to pay for essential public goods, services, and activities.

Progressive taxes are those in which a higher percentage of the income of high-income groups is taken than that of low-income groups. An equal percentage of income from each income group is taken as a tax under a proportional system. Regressive taxes—Taxes that take a larger percentage of low-income groups' income than high-income groups—are those that are imposed.

To learn more about tax refers to:

brainly.com/question/26316390

#SPJ4

If the applied shear force V = 18 kip, the member's maximum shear stress is 4.48 Ksi.

If the applied shear force V = 18 kip, the member's maximum shear stress is 4.48 Ksi.

y = 0.5*1*5+ 2[2*1*2] / 1*5 + 2*1*2

= 1.1667 in

I = 1/12 5*1^3 + 5*1*(1.1667-0.5) (1.1667-0.5)

^2 + 2*(1/12)*1*2^3 + 2*1*2*(2-1.1667) (2-1.1667)

= 6.75 in^4

Qmax = 2(0.91665)(1.8333)ya (1)

= 3.36111 in^3

VQmax / It = Tmax

= 18(3.3611)/(6.75(3)(1) (1)

= 4.48 Ksi

The maximum shear stress equals the difference between the primary stresses divided by 0.5.

The basic planes equation, 2p, yields two angles between 0° and 360°, as is to be noted.

In accordance with this idea, yielding is projected to occur in triaxial states of stress whenever the yield stress is equal to half the algebraic difference between the greatest and lowest stress.

For a triaxial situation of stress where 1 > 2 > 3, the maximum shear stress is consequently (1 > 3)/2.

To learn more about  shear stress refer

https://brainly.com/question/30216353

#SPJ4

A reliable alternator should keep the battery voltage constant at 13.9 to 14.8 volts.

To learn more about alternator voltage, refer to:

https://brainly.com/question/27851005

#SPJ1

Inversely proportional to the square of the distance from the source, the strength of an electric field produced by source charge Q. As an inverse square law, this applies.

The magnitude of an electric field depends on the location it is present, and it gets less the further it is from the source. When measured in coulombs (C), the electric charge of the source item, the electric field strength at a given vector point is exactly proportional to this charge. The field intensity also depends on the separation between the source object and the test charge vector point, which is inversely proportional. A positive charge's size is inversely proportional to the number of field lines leaving it or entering it. According to how close you are, the field has more power.

To know more about vector

https://brainly.com/question/3405075

#SPJ4

Answer:

If you subnet the 172.16.0.0/20 IP address, the first subnet is 172.16.0.0. The third usable subnet is 172.16.0.64 and the seventh usable subnet is 172.16.0.224. your welcome

The elastic rebound concept states that the energy produced when highly strained rock fractures and suddenly shifts is what causes earthquakes.

The correct option is A.

The relationship between the forces that are applied to an item and the consequent deformations is discussed in the theory of elasticity. In reality, analyzing a material's elastic behavior's boils down to figuring out the elastic constants that correlate to simple deformations.

The elastically distorted rocks all along fault rebound back to their former shape as much as they can after an earthquake.

To know more about elastic rebound theory visit:

https://brainly.com/question/3157947

#SPJ4

Alumina's strong chemical bonds are the cause of a number of its properties, including its low thermal and electric conductivity and high melting temperature, which makes casting alumina into shapes nearly difficult.

Al is the chemical symbol for aluminium, an element with the atomic number 13 in nature. Al2O3 is the chemical formula for the substance alumina. As a result, the primary distinction between aluminium and alumina is that the former is a chemical element and the latter is a compound that contains aluminium. Pure aluminium lacks significant tensile strength. However, alloying components like manganese, silicon, copper, and magnesium can be used to generate an alloy with qualities that are specifically suited for a certain purpose while also enhancing the strength of aluminium.

To learn more about alumina click the link below:

brainly.com/question/29340642

#SPJ4

int numTiles, gapWidth;

numTiles = (floor((length - gapWidth)/(tileSize + gapWidth)));

gapWidth = ((length - (numTiles * tileSize))/ (numTiles + 1));

System.out.println("Number of tiles: " + numTiles);

System.out.println("Gap width: " + gapWidth);

In Java, you can convert numbers into various types such as int, float, double, etc. using the built-in type conversion functions. For example, to convert an int to a float, you can use the Float.parseFloat(String s) function.

This function takes in a string representation of the number, and returns a float. Similarly, you can use Integer.parseInt(String s) to convert a string to an int.

There are also other type conversion functions available such as Long.parseLong(String s) and Double.parseDouble(String s). Additionally, you can use the wrapper classes such as Integer,

Float, and Double to convert numbers from one type to another. For example, if you have an int variable and you want to convert it to a double, you could use the Double wrapper class to do so. Finally, you can also use the toString() method on any type to convert it to a string.

To learn more about java programming refer :

https://brainly.com/question/30089227

#SPJ4

Unspent annual budget at the end of the year would not drive the need for layout planning.

A annual budget is a financial plan that outlines a company's expected income and expenses over the course of one year. It typically includes estimated revenues, expenses, capital investments, and financing needs. The purpose of an annual budget is to provide a structured framework for making financial decisions and to forecast the financial effects of those decisions. Additionally, it can be used to identify potential problems and opportunities, as well as track financial performance. The budget should be tailored to the company's specific needs and should be monitored and adjusted as necessary. Creating and maintaining an annual budget is an important part of managing a business's finances and can help ensure the success of the company in the long-term.

Layout planning involves the physical arrangement of an organization's facilities, resources, and personnel. This type of planning is typically done in order to optimize efficiency and productivity. An unspent annual budget does not directly affect the physical layout of an organization's facilities and resources.

To learn more about company's
https://brainly.com/question/17169621
#SPJ4

The structural behaviour of steel "tree-like columns," or columns with branches, has not been the subject of many studies.

Choose New to add a new tree to your project. The Add Plants dialogue box for Land F/X will now appear. The Genus of the tree you want to add is located by scrolling. To choose a genus, click it.

An Effective Plant Catalogue

Comprehensive Plant Catalogue in SketchUp. The kinds of plants that landscape architects and designers use every day... in the real world... are available in a sizable and expanding selection on SUPlants. View our selection of plants below, then visit the complete plant catalogue.

A binary decision tree with linear regression functions at the terminal (leaf) nodes, the M5 model tree is a decision tree learner for regression task used to predict values of the numerical response variable Y [13]. It can predict continuous numerical attributes.

To learn more about concrete refers to:

https://brainly.com/question/28903866

#SPJ4

E An ArrayIndexOutOfBoundsException will occur in both code segments I and II. If there are any duplicate elements in the int array arr, the code segment following is meant to set the boolean variable duplicates to true.

The outer loop runs for values of j from 0 to 4 since the value of data. length is 5 (because the length of a two-dimensional array is the number of rows). The number of items in the array's initializer determines how many elements there are in the defined array of pointers to int. A container object called an array carries a predetermined number of values of a single kind. When an array is constructed, its length is predetermined. the following creation.

To learn more about  length  

please check:

https://brainly.com/question/13197640

#SPJ4

If your Android device is silent, in Airplane Mode, or set to Do Not Disturb, you can determine if the ringing is not caused by a user-related issue.

Make sure that automatic call audio routing is selected under Accessibility > Touch > Settings > Call Audio Routing. Try resetting your device or installing the most recent software.

When someone calls, your Android phone won't ring for a variety of reasons, including: Your ringer volume has been decreased. Your phone is in airplane or Do Not Disturb mode. You made call forwarding available. Bluetooth is paired with your phone.

To know more about Airplane Mode visit :-

https://brainly.com/question/28274546

#SPJ4

The correct answer is both are correct  technician a says the vat contains a carbon pile that is a variable resistor. technician b says the vat is used to check batteries, starting systems, and charging systems.

A resistor is an electrical component that controls or restricts how much electrical current may pass across a circuit in an electronic device. A specified voltage can be supplied via resistors to an active device like a transistor. Modern resistors are often constructed from a carbon, metal, or metal-oxide layer. In these resistors, an insulating material is wrapped in a helix around a thin film of conductive (but still resistant) material.A passive electrical component called a resistor prevents the flow of electric current by introducing resistance. They are present in practically all electrical networks and electronic circuits. Ohms () are used to measure resistance.

To learn more about resistor click the link below:

brainly.com/question/24297401

#SPJ4

For instance, the thinking distance will increase from 9 m to 18 m and the braking distance will grow by a factor of four from 14 m to 56 m if a car's speed is doubled from 30 mph to 60 mph.

The distance that a car travels while braking completely is known as the braking distance. A number of factors affect the braking distance. First, the braking distance will be impacted by the grade (slope) of the road. Gravity helps you stop more easily and shortens the stopping distance when you are moving uphill. Similar to how it works against you as you drop, gravity will lengthen your braking distance. Next, your braking distance may be impacted by the frictional resistance between the road and your tires. On a wet road, it's likely that you'll need greater stopping distance than you would on a dry road if you have old tires. Your beginning velocity will be the final factor we take into account.

Learn more about braking distance here:

https://brainly.com/question/21996254

#SPJ4

water flowing via the condenser, turbine, and boiler.

The Kelvin-Planck Statement states that it is impossible to build a machine that runs on a cycle and generates work just by transferring heat from a single body.

A heat engine is a device used in engineering and thermodynamics that transforms heat into mechanical energy that may be utilized to do mechanical labor.It accomplishes this by lowering the temperature of a functioning substance from one that is higher.

To know more about nuclear reactor visit:

https://brainly.com/question/13869748

#SPJ4

The basic requirement of measurements is to have a standard or reference point against which to compare the quantity being measured. This standard or reference point should be well-defined and stable, and the measurement process should be repeatable and consistent. Additionally, it is important to ensure that the measurement equipment is calibrated and in good working condition.

Answer:

The most basic requirement for measurements is the presence of a standard or reference point against which the quantity being measured can be compared. The measurement process should be repeatable and consistent, and the standard or reference point should be well-defined and stable. Furthermore, ensure that the measurement equipment is calibrated and in good working order.

Explanation:

There are PC and Macintosh computer platforms available at the college.

Terms in this set (65) An organization should end support for existing products when adopting new support standards to cut costs on both old and new products.

A system for linking related text documents that allows multiple users to participate is known as hypertext. Any word or phrase can be "hyperlinked" in a hypertext document to information related to that word or phrase in the same document or another document.

To know more about Macintosh computer visit :-

https://brainly.com/question/7201978

#SPJ4

The specific weight and the specific gravity of the mixture at standard temperature and pressure is 0.7868

Density of gasoline=48.693 l b/ f t^ 3

Density of kerosene=49.942 l b /f t^ 3

8 ft^3 of gasoline+4 ft^3 of kerosene.

resulting density= (8x48.693)+(4x49.942)/12=49.1 l b /f t^ 3

SG=P/PW=49.1/62.4=0.7868                                        

Blending gasoline with kerosene results in increased density, decreased volatility, and a lower octane rating.

You can make JP-4 jet fuel by combining it 50-50. Kerosene is heavier than gasoline and has a much higher flash point, making it more difficult to burn and start. For safety, the flash point of jet fuel (kerosene) is 100F, and the flash point of gasoline is -50F.  

To learn more about gasoline
https://brainly.com/question/29991915
#SPJ4

The tension in the rope is 4.59 N. The box's kinetic friction coefficient with the floor is 0.23.

Problem 1: To calculate the tension in the rope, we need to calculate the weight of the ball,

which can be done using the formula F = mg,

where F is the force (weight) of the ball, m is the mass of the ball, and g is the acceleration due to gravity (9.81 m/s^2).

Therefore,

the weight of the ball is 0.470 kg * 9.81 m/s^2 = 4.59 N.

Since the tension in the rope is equal to the weight of the ball, the tension in the rope is 4.59 N.

Since the post is frictionless, the pole exerts no force on the ball.

Problem 2: To calculate the coefficient of kinetic friction,

we need to use the formula μk = Ff/Fn,

where "μk" stands for "kinetic friction coefficient,"

  Ff is the frictional force, and Fn is the normal force.

Since the push force has a horizontal component of 20 N and a vertical component of 25 N downward,

the normal force is 25 N.

Since the box is slowing at a constant rate of 0.90 m/s each second,

The frictional force can be found using the formula Ff = ma

The box's kinetic friction coefficient with the floor is 0.23.

To learn more about tension and force refer :

https://brainly.com/question/30033702

#SPJ4

Goals are main pillers of achivement and are the effective performance management process.

Training program should offer a variety of innovative programs. Programs should enhance knowledge, develop necessary skills, and enrich both the individual and the organization. Organizations must create a culture of learning.

Making departmental goals accessible to all managers ensures there is no overlap, reduces conflict, and allows members of different departments to see where they support each other and ensure they are not working at cross purposes.

          S – Specific

          M – Measurable

        A – Achievable/Attainable

        R – Results-Oriented/Realistic/Relevant

        T – Time-Bound

Use Peer Reviews.

Offer Frequent Performance Feedback.

Utilize Performance Management Software.

Define and Communicate Company Goals and Performance      Objectives.

Set Regular Meetings to Discuss Outcomes and Results.

Performance appraisal has three basic functions

(1) to provide adequate feedback to each individual on his or her performance.

(2) to serve as a basis for modifying or changing behavior toward more effective working habits.

(3) to provide data to managers with which they may judge future job assignments and compensation. The performance appraisal concept is central to effective management. Much hard and imaginative work has gone into developing and refining it. In fact, there is a great deal of evidence to indicate how useful and effective performance appraisal is. Yet present systems of performance appraisal do not serve any of these functions well.

4 steps to add an action plan

   Department: Choose the department you wish to create an Action Plan for from the list provided. This list includes all the departments you have been assigned access. You will want to create a separate action plan for each department.

   Category: Type the name of the category needing improvement. This category can be found on your standard survey report and is listed as an “Attitude Area.” For example, “Immediate Supervision” is an attitude area.

   Opportunity for Improvement: Select the description of the survey item you will be working to improve. Each survey item you are working on should have a separate action plan. For example, “My Supervisor Has Effective Communications” is a survey statement.

To know more about  performance management visit:

https://brainly.com/question/29833837

#SPJ4

Effective performance management relies on goals, which are the primary predictors of success.

Innovative programs should be offered by training programs. Knowledge should be expanded, skills should be developed, and both the individual and the organization should benefit from the programs. A learning culture must be established by organizations.

By making departmental goals accessible to all managers, overlap is avoided, conflicts are reduced, and members of different departments can see where they complement one another and ensure that they are not working against each other.

S stands for specific, M for measurable, A for attainable, Achievable, and Relevant, R for results-oriented, realistic, and relevant, and T for time-bound use and peer reviews.

Provide regular feedback on performance.

Make use of software for performance management.

Establish and Communicate Performance Objectives and Company Goals.

Establish regular meetings to discuss results and outcomes.

The first and most fundamental function of performance evaluation is to provide each employee with sufficient feedback on their performance.

(2) to provide a foundation for altering one's behavior in the direction of more efficient work practices.

(3) to provide managers with data they can use to evaluate future job assignments and pay. The idea of performance reviews is essential to efficient management. It has been developed and refined through a great deal of creative and laborious effort. In fact, there is a lot of evidence that performance evaluation is useful and effective. However, the current performance evaluation systems do not adequately fulfill any of these requirements.

To know more about performance management :

brainly.com/question/29833837

#SPJ4

The horizontal and vertical components at each pin is Ay =500N, Ax =2.50KN calculated with the help of equilibrium.

Create the member BD's free body diagram.

Think about that for a moment. B. MB = 0 Ex (0.5m) - Ey (0.5m) + 500 (2m) = 0 Ex (0.5m) - Ey (0.5m) = 1000 Ex (0.5m) - Ey (0.5m) = 2000

Create the member AC's free body diagram.

Think about that for a moment. A.\s∑MA=0

Ey (0.5m) + Ex (0.5m) = 2000 Ex + Ey = 4000 Ey (0.5m) + Ex (0.5m) = 500 (2m) - 500 (2m) = 0

Solve the equations in (2)

Ey =1000N= 1KN

Ex =3000N =3 kN

For member BD, jot down the equilibrium force equations.

Equilibrate the x-axis forces at Fx=0

Bx + (500 N) - (Ex) = O Bx + (500 N) - (3 K N) = 0

Bx =2.50kN

Fy = 0 to equate the forces acting along the y-axis

By-(Ey)=0

By -(1KN)=O

By = 1kN

For member AC, jot down the equilibrium force equations.

Equilibrate the x-axis forces.

∑Fx =0

For example, (500N) -(Ax)=0 (3kN) -(500N) -(Ax)=0 Ax=2.50KN

Forces on the y-axis should be equalised.

∑Fy =0

By - (500N) - (Ay) =0

(1KN) - (500 N) - (Ay) =0

Ay =500N

Learn more about Equilibrium here:

https://brainly.com/question/13258910

#SPJ4

The board's analogue input pin A2 is connected to the potentiometer's middle pin.

A three-terminal resistor with a sliding or rotating contact that creates a variable voltage divider is what is meant by this term. Only two terminals, one end, and the wiper, are required for the potentiometer to function as a rheostat or variable resistor.

The potentiometer is a device used to gauge the unknown voltage by contrasting it with the established voltage. It can be used to calculate the emf and internal resistance of the specified cell as well as to compare the emf of various cells.

Both linear and rotary potentiometers are common types of potentiometers.

To learn more about potentiometer refers to:

brainly.com/question/25606721

#SPJ4

Answer:

If 60% of the encryption operations can be performed in parallel in the original program, then adding a second unit would provide a speedup of 20 on the encryption operation portion that can be parallelized. This is because the second unit allows for the parallel execution of the encryption operations, resulting in a reduction of the execution time.

On the other hand, if the parallelization is limited to the number of encryption units, providing four encryption units would provide a speedup of 10 on the operation portion that cannot be parallelized. This is because the addition of two more units would not increase the parallelization of the encryption operations that are not parallelizable.

Therefore, if the goal is to speed up the encryption operation as much as possible, adding a second unit to support parallel encryption operations would be more useful as it would provide a speedup of 20 on the encryption operation portion that can be parallelized.

The addition of a second unit to facilitate parallel encryption operations would be more beneficial if the goal is to accelerate the encryption process.

If 60% of the encryption processes in the original program can be carried out in parallel, adding a second unit would result in a speedup of 20 for that portion of the encryption procedures that can be parallelized.

This is so that the execution time can be decreased by doing the encryption procedures in parallel using the second unit.

The provision of four encryption units would result in a 10x speedup on the operation portion that cannot be parallelized, however, assuming the number of encryption units is the only constraint on parallelization.

This is so that the parallelization of the encryption processes that cannot be parallelized would not be increased by the addition of two more units.

Therefore, if the intention is to speed up the encryption process, adding a second unit to enable parallel encryption operations would be more advantageous.

To learn more about encryption units, visit here:

https://brainly.com/question/17017885

#SPJ2

The correct answer is a COP of 4.0 supplies heat to a building at a rate of 100 kW. Determine the power input to the heat pump 25 kw.

A refrigerator's food compartment is kept at 4°C by removing heat from it at a rate of 360 kJ/min. Calculate the refrigerator's performance coefficient if a 2kW power input is needed to operate it. COP = (360/2)(1/60) = 3 is the explanation. A ratio used to gauge a system's effectiveness is called the Coefficient of Performance (CoP). It is founded on the link between the amount of power (in kW) input to a system and the power output. Power intake minus power output is known as CoP. The system is more effective the higher the number.

To learn more about heat power click the link below:

brainly.com/question/3306226

#SPJ4