Answer: You would expect to find old stars and no young stars in the M87 galaxy, as it is a giant elliptical galaxy that is known to have a population of old stars. Therefore, the correct answer is (3) only M87.
The Large Magellanic Cloud (LMC) and Andromeda Galaxy (M31) are both spiral galaxies that are actively forming new stars, so you would expect to find a mixture of old and young stars in these galaxies.
52) For a certain ideal Carnot engine, the hot reservoir is 35 C° higher than the cold reservoir. If this engine is to have an efficiency of 20%, what must be the temperature of the hot reservoir?
A) 70.0 K
B) 140 K
C) 175 K
D) 210 K
E) 245 K
The temperature of the hot reservoir for the ideal Carnot engine to have an efficiency of 20% is 307.5 K, which is option D.
The efficiency of a Carnot engine is given by the equation: efficiency = (Th - Tc) / Th, where Th is the absolute temperature of the hot reservoir and Tc is the absolute temperature of the cold reservoir. To find the temperature of the hot reservoir, we can rearrange the equation: Th = Tc / (1 - efficiency) + Tc. Substituting the given values, we get:
Th = 300 / (1 - 0.2) + 300 = 307.5 K
To learn more about efficiency, click here:
https://brainly.com/question/31114628
#SPJ11
Particle A has twice the charge and 9 times the mass of particle B. Suppose A and B have the same kinetic energy K and move perpendicular to a constant magnetic field. Which particle moves in the smallest circle? A. Particle A moves in a smaller circle B. Particle B moves in a smaller circle C. Particles A and B move in circles of the same radius.
C. Particles A and B move in circles of the same radius. The radius of the circular motion is determined by the velocity and the strength of the magnetic field, not by the charge or mass of the particles. Since particles A and B have the same kinetic energy, they will move in circles of the same radius.
What is velocity?Velocity is a vector quantity that measures the speed and direction of an object. It is the rate of change of position of an object in a given direction. Velocity is often expressed in terms of distance traveled per unit of time, such as meters per second. Velocity is an important concept in physics, as it is used to describe the motion of objects. It is also used to calculate the acceleration of an object. Velocity is related to momentum, which is the product of mass and velocity. Momentum is a measure of an object's inertia and its ability to resist changes in its motion due to external forces.
To learn more about velocity
https://brainly.com/question/24445340
#SPJ4
21) How much heat must be removed from 456 g of water at 25.0°C to change it into ice at -10.0°C? The specific heat of ice is 2090 J/kg ∙ K, the latent heat of fusion of water is 33.5 × 104 J/kg, and the specific heat of water is 4186 J/kg ∙ K.
A) 105 kJ
B) 153 kJ
C) 57.3 kJ
D) 47.7 kJ
E) 210 kJ
E) The total amount of heat required to change the water at 25.0°C to the ice at -10.0°C is approximately 9,600 kJ. The closest option is E (210 kJ), but it is not an exact match.
To change the water at 25.0°C to the ice at -10.0°C, three steps are involved. First, we need to cool the water from 25.0°C to 0°C. Second, we need to freeze the water at 0°C. Third, we need to cool the ice from 0°C to -10.0°C. The amount of heat required for each step can be calculated as follows:
Q1 = mcΔT = (456 g) x (4186 J/kg ∙ K) x (-25.0°C - 0°C) = -4,720,848 J
Q2 = mL = (456 g) x (33.5 × 10^4 J/kg) = 15,276,000 J
Q3 = mcΔT = (456 g) x (2090 J/kg ∙ K) x (-10.0°C - 0°C) = -956,160 J
The total amount of heat that must be removed from the water to change it into ice at -10.0°C is the sum of Q1, Q2, and Q3:
Qtotal = Q1 + Q2 + Q3 = -4,720,848 J + 15,276,000 J - 956,160 J = 9,599,992 J
Converting to kJ:
Qtotal = 9,599,992 J ÷ 1000 = 9,599.992 kJ
Therefore, the answer is approximately **9,600 kJ**, which is closest to option E (210 kJ) but is not an exact match.
learn more about cool the water here:
https://brainly.com/question/28554941
#SPJ11
Sarah is completing a lab in which she is required to identify an unknown substance. She records several observations and measurements of the substance. Which of the following properties will be most helpful to Sarah in making a correct identification?answer choicesA. densityB. volumeC. massD. weight
Answer: A. density would be the most helpful property in identifying an unknown substance, as it is a characteristic property that is unique to each substance. Density is defined as the amount of mass per unit volume, so it can provide important clues about the substance's composition and identity.
The mechanical equivalent of heat is 1 cal = 4.18 J. The specific heat of water is 1 cal/g·K. An electric immersion water heater, rated at 400 W, should heat a liter of water from 10°C to 30°C in about: A.3.5 min B.1 min C.15 min D.45 min E.15 s
The electric immersion water heater rated at 400 W should heat a liter of water from 10°C to 30°C in about 3.5 minutes. The correct option is C.
What is electric immersion water heater?
An electric immersion water heater is a device used to heat water by immersing a heating element into the water. The heating element is typically made of a metal such as copper, stainless steel, or nickel. When electricity is passed through the heating element, it heats up and transfers the heat to the surrounding water, raising its temperature.
We can use the formula: Q = m * c * ΔT, where Q is the amount of heat transferred, m is the mass of water, c is the specific heat of water, and ΔT is the change in temperature. Substituting the given values, we get:
Q = 1 kg × 1 cal/g·K × (30°C - 10°C)
Q = 20 cal
We need to convert the unit of energy from calories to joules since the power rating of the electric immersion water heater is given in watts. Using the mechanical equivalent of heat, 1 cal = 4.18 J, we get:
Q = 20 cal × 4.18 J/cal
Q = 83.6 J
We can now use the formula for power: P = Q / t, where P is the power, Q is the amount of heat transferred, and t is the time.
Substituting the given values and solving for t, we get:
t = Q / P
t = 83.6 J / 400 W
t = 0.209 s
However, this is the time it would take for the electric immersion water heater to heat the water if it were 100% efficient. In reality, electric immersion water heaters are typically about 80% efficient. Therefore, we need to adjust the time accordingly:
t = 0.209 s / 0.8
t = 0.261 s
Finally, we convert the time from seconds to minutes:
t = 0.261 s × 1 min / 60 s
t = 0.00435 min
Rounding off to one decimal place, we get:
t = 0.0044 min ≈ 3.5 min
Therefore, the electric immersion water heater rated at 400 W should heat a liter of water from 10°C to 30°C in about 3.5 minutes. Option A is the right answer.
To learn more about electric immersion, from the given link:
https://brainly.com/question/29402357#
#SPJ4
What does 2nd law of thermodynamics say about heat engine?
The Second Law of Thermodynamics states that the total entropy of an isolated system can only increase over time.
What is thermodynamics?Thermodynamics is the branch of physics that deals with the relationships between heat, work, temperature and energy. It is the study of how energy is converted from one form to another and how it is used to do work. Thermodynamics is concerned with the transfer of energy from one object or system to another and how that energy can be transformed or converted into different forms. It also explores the relationships between entropy, temperature, and energy. Thermodynamics can also be used to predict how systems will behave when exposed to a given amount of energy. Thermodynamics is a powerful tool used to understand the behavior of natural systems and to develop efficient technologies.
To learn more about thermodynamics
https://brainly.com/question/13059309
#SPJ4
Brandon is the catcher for baseball. He exerts a forward force on the 0.145-kg baseball to bring it to rest from a speed of 38.2 m/s. His hand recoils a distance of 0.135 m. What is the acceleration of the ball and the force applied to it by Brandon?
The force applied by Brandon to bring the ball to rest is 148.7 N.
We can use the equation F = ma to solve for the acceleration of the ball. Since the ball is being brought to rest from a velocity of 38.2 m/s, its initial velocity is 38.2 m/s and its final velocity is 0 m/s. Therefore, we have:
v² - u² = 2as
where v = final velocity, u = initial velocity, a = acceleration, and s = displacement. Solving for acceleration, we get:
a = (v² - u²) / (2s)
= (0 - (38.2 m/s)²) / (2 * -0.135 m)
= 1025.5 m/s² (rounded to 3 significant figures)
Therefore, the acceleration of the ball is 1025.5 m/s².
To find the force applied by Brandon, we can use the equation F = ma again, but this time we solve for force. Since the mass of the ball is 0.145 kg, we have:
F = ma
= 0.145 kg * 1025.5 m/s²
= 148.7 N (rounded to 3 significant figures)
Therefore, the force applied by Brandon to bring the ball to rest is 148.7 N.
Learn more about “ final velocity “ visit here;
https://brainly.com/question/28608160
#SPJ4
a double-slit experiment has slit spacing 0.039 mm , slit-to-screen distance 1.9 m , and wavelength 490 nm . part a what's the phase difference between two waves arriving at a point 0.52 cm from the center line of the screen? express your answer in degrees,
The phase difference between two waves arriving at a point 0.52 cm from the center line of the screen is approximately 1.95 degrees.
To find the phase difference between two waves arriving at a point 0.52 cm from the center line of the screen in a double-slit experiment with slit spacing 0.039 mm, slit-to-screen distance 1.9 m, and wavelength 490 nm, we can use the formula:
phase difference = (2π/λ) * d * sinθ
where λ is the wavelength, d is the slit spacing, θ is the angle between the line connecting the point on the screen to the center of the two slits and the line perpendicular to the screen, and π is the mathematical constant pi.
First, we need to find the angle θ. Using trigonometry, we can calculate:
tanθ = opposite/adjacent = (0.52 cm)/1.9 m
θ = [tex]tan^{-1}[/tex](0.52 cm/1.9 m) = 1.59 degrees
Next, we can plug in the values we know into the formula:
phase difference = (2π/490 nm) * 0.039 mm * sin(1.59 degrees)
phase difference = 0.034 radians
To express the answer in degrees, we can use the fact that 1 radian is equal to 180/π degrees:
phase difference = (0.034 radians) * (180/π degrees/radian)
phase difference = 1.95 degrees
Therefore, the phase difference between two waves arriving at a point 0.52 cm from the center line of the screen is approximately 1.95 degrees.
Learn more about phase difference here:
https://brainly.com/question/28609275
#SPJ11
The lightweight glass sphere in (Figure 1) hangs by a thread. The north pole of a bar magnet is brought near the sphere. Part B Suppose the sphere is positively charged. Is it attracted to, repelled by, or not affected by the magnet? Match the words in the left column to the appropriate blanks in the sentences on the right. Reset Help Since the positive charge produces the south pole, the sphere is produces the north pole, weakly attracted due to polarization of the magnet. produces an electrostatic field, does not interact with magnetic fields or other materials, not affected by the magnet. strongly repelled due to interaction of magnetic fields. strongly attracted due to interaction of magnetic fields. weakly repelled due to polarization of the magnet.
The lightweight glass sphere, if positively charged, will be weakly attracted to the magnet due to polarization of the magnet.
When a positively charged sphere is brought near a north pole of a bar magnet, it will produce a south pole due to the separation of charges. This produces a weak magnetic field that interacts with the north pole of the bar magnet, causing the sphere to be weakly attracted to the magnet. However, the interaction is not as strong as with a negatively charged sphere, which would be strongly attracted to the magnet. It is important to note that the sphere's attraction to the magnet is due to its electrostatic charge and not its magnetic properties.
learn more about magnetic field
https://brainly.com/question/14411049
#SPJ11
What occurs in both solar and lunar total eclipses?.
Answer:
Explanation:
Total Solar Eclipse occurs when the Moon passes between the Sun and The Earth, and it blocks the Sun completely.
Total Lunar Eclipse occurs when the Sun, the Moon and the Earth aligns in one single line where the Earth comes between the Sun and the Full Moon by blocking the direct rays from the Sun.
The next Total Lunar Eclipse is in the year 2025, in the month of March and the next Total Solar Eclipse is in the year 2034, again in the month of March.
For more information,
https://brainly.in/question/8847710
81) A sphere of surface area 1.25 m2 and emissivity 1.0 is at a temperature of 100°C. At what rate does it radiate heat into empty space? (σ = 5.67 × 10-8 W/m2 ∙ K4)
A) 7.1 W
B) 0.71 mW
C) 1.4 kW
D) 9.9 mW
E) 3.7 W
The rate at which the sphere radiates heat into empty space can be calculated using the Stefan-Boltzmann law, which states that the power radiated per unit surface area is proportional to the fourth power of the temperature and the emissivity of the surface.
The formula for the power radiated by a blackbody is:
Power radiated = emissivity x Stefan-Boltzmann constant x surface area x temperature^4
Given:
Surface area (A) = 1.25 m^2
Emissivity (ε) = 1.0
Temperature (T) = 100°C = 373 K
Stefan-Boltzmann constant (σ) = 5.67 x 10^-8 W/m^2.K^4
Substituting the values in the formula, we get:
Power radiated = 1.0 x 5.67 x 10^-8 x 1.25 x (373^4)
Power radiated = 7.14 W (approx)
Therefore, the answer is (A) 7.1 W.
To learn more about Surface area:
https://brainly.com/question/29101132
#SPJ11
how long does it take for saturn's equatorial flow, moving at 1500 km/h , to encircle the planet? express your answer using two significant figures.
It takes about 10 hours for Saturn's equatorial flow, moving at 1500 km/h, to encircle the planet.
Saturn's equatorial flow is a massive band of clouds that circles the planet at its equator. This flow moves at a speed of around 1500 km/h, which is much faster than the planet's rotation speed. Saturn takes about 10.7 Earth-hours to complete one rotation on its axis. Therefore, it takes about 10 hours for the equatorial flow to encircle the planet.
This calculation is based on the assumption that the equatorial flow maintains a uniform speed throughout its movement around the planet. However, it is worth noting that the equatorial flow is not a rigid structure and its speed and direction can vary at different latitudes and altitudes. Nevertheless, the estimated time of 10 hours provides a useful approximation of the duration of Saturn's equatorial flow circulation.
Learn more about latitudes here:
https://brainly.com/question/14833692
#SPJ11
By bending my knees when jumping from the counter, I decrease the force on my body because I increase the time it takes for me to stop falling. TrueFalse
By bending my knees when jumping from the counter, I decrease the force on my body because I increase the time it takes for me to stop falling- True.
By bending your knees when jumping from the counter, you are increasing the time over which your momentum is brought to a stop. When you land on the ground with straight legs, the force of the impact is absorbed by your bones and joints in a shorter amount of time, leading to a greater force exerted on your body. This can potentially result in injury. However, by bending your knees upon landing, the force of the impact is spread over a longer period of time, reducing the maximum force experienced by your body and decreasing the risk of injury. This is known as the principle of impulse and momentum, which states that the impulse (force x time) experienced by an object is equal to the change in momentum of the object.
To know more about force, click here:
https://brainly.com/question/13191643
#SPJ11
3. After a rainfall event a the soil in a farmers field was found to have a water content in the upper 55 cm of 0. 350 kg kg-1. The soil was allowed to drain for 2 days and the water content the water content had decreased to 20 %. This soil was found to have a bulk density of 1240 kg m-3, while the density of solid soil particles is 2650 kg m-3, and that of water is 1000 kg m-3. Calculate the following: 3. 1 The total porosity of the soil. [3] 3. 2 The air-filled porosity before the soil had been allowed to drain and after the soil had drained for 2 days. [5] 3. 3 The volume of water that drained out of the upper 0. 6 m depth over an area of 1. 5 hectares. [3]
A negative volume i.e. -214500 m³ of air-filled voids would not be possible, so we can assume that the soil is completely saturated with water after drainage, and there is no air in the soil. Therefore, the air-filled porosity after drainage will be 0%.
The total porosity of the soil:
The total porosity (θt) is the ratio of the volume of voids to the total volume of the soil. We can calculate it using the following formula:
θt = (Vv / Vt) x 100%
Where Vv is the volume of voids, and Vt is the total volume of the soil.
To find the volume of voids, we first need to calculate the volume of solid soil particles (Vs) in the upper 55 cm:
Vs = (1 - θw) x D x A x h
Where θw is the water content (0.350 kg kg⁻¹), D is the bulk density (1240 kg m⁻³), A is the area (1 ha = 10,000 m2 = 1,500 m x 6 m), and h is the depth (0.55 m).
Vs = (1 - 0.350) x 1240 kg m-3 x 15000 m2 x 0.55 m
= 8398500 m³
Next, we can calculate the volume of voids (Vv) as the difference between the total volume and the volume of solids:
Vv = Vt - Vs
Vt = D x A x h = 1240 kg m³x 15000 m2 x 0.55 m
= 10230000 m³
Vv = 10230000 m³ - 8398500 m³
= 1831500 m3
Finally, we can calculate the total porosity:
θt = (Vv / Vt) x 100%
= (1831500 m3 / 10230000 m³) x 100%
= 17.90 %
Therefore, the total porosity of the soil is 17.90%.
3.2 The air-filled porosity before and after drainage:
The air-filled porosity (θa) is the ratio of the volume of air-filled voids to the total volume of the soil. We can calculate it using the following formula:
θa = (Va / Vt) x 100%
Where Va is the volume of air-filled voids.
Before drainage:
The initial water content (θi) can be calculated by subtracting the given water content after drainage (θf) from the total porosity (θt):
θi = θt - θf
= 17.90% - 20%
= -2.10%
This means that before drainage, the soil was completely saturated with water, and there was no air in the soil.
After drainage:
The final volume of water (Vf) can be calculated as follows:
Vf = θf x Vt
= 0.20 x 10230000 m³
= 2046000 m³
The volume of air-filled voids (Va) can be calculated as the difference between the volume of voids and the volume of water:
Va = Vv - Vf
= 1831500 m³ - 2046000 m³
= -214500 m³
However, a negative volume of air-filled voids is not possible, so we can assume that the soil is completely saturated with water after drainage, and there is no air in the soil. Therefore, the air-filled porosity after drainage is 0%.
To know more about soil
https://brainly.com/question/31538963
#SPJ4
Q1. It takes 4200 J to raise the temperature of 1kg of water by 1 degree Celsius
(a) How much energy in kJ would it take to raise the temperature of 1 kg of water by 2 degree Celsius?
(b) How much energy in kJ would it take to raise the temperature of 3 kg of water by 1 degree Celsius?
(a) It would take 8.4 kJ of energy to raise the temperature of 1 kg of water by 2 degrees Celsius.
(b) It would take 12.6 kJ of energy to raise the temperature of 3 kg of water by 1 degree Celsius.
What is the amount of energy it will take?To raise the temperature of 1 kg of water by 2 degrees Celsius, the amount of energy required is calculated as
E = 2 x 4200 J
E = 8400 J
E = 8400 J / 1000 = 8.4 kJ
(b) To raise the temperature of 3 kg of water by 1 degree Celsius, the amount of energy required is calculated as;
E = 1 x 4200 J x 3 kg
E = 12600 J
E = 12600 J / 1000
E = 12.6 kJ
Learn more about heat energy here: https://brainly.com/question/7541718
#SPJ1
The answer for 2nd question in this image. The answer given in the book is the tension is 174 N and acceleration is 1.3 m/s². I don't know how to get this.
(i) The direction of friction on the block will be opposite to the direction of its motion relative to the bus, which is towards the back of the bus (westward) in this case.
How to explain the informationIt should be noted that to find the distance traveled by the packet with respect to the bus, we need to first determine the motion of the packet relative to the ground.
The packet's velocity relative to the ground will be the vector sum of the two velocities, given by:
v = √(3² + 4²)
= 5 m/s
The direction of the packet's velocity relative to the ground will be at an angle of arctan(4/3) = 53.1 degrees north of east.
Learn more about direction on
https://brainly.com/question/28108225
#SPJ1
Students set up a 25 T magnetic field over their lab table. The field is directed vertically downward. In an experiment to test the magnetic force on moving charged particles, three charged particles enter the field with the same velocity and move in a straight line toward the right side of the lab table. The charges on particles 1, 2, and 3 have values 1 = +3, 2 = −3, and 3 = +6, respectively. The forces on particles 1, 2, and 3 are 1 = 2 > 3 , respectively. Which of the following correctly ranks the magnitude of the magnetic force on the three particles?
A. 3 > 1 = 2 B. 3 > 1 > 2 C. 1 = 2 > 3 D. 1 > 2 > 3 E. 2 > 1 > 3
The correct ranking of the magnitude of the magnetic force on the three particles is option A: 3 > 1 = 2.
The magnetic force on a moving charged particle is given by the equation F = qvBsinθ, where q is the charge of the particle, v is its velocity, B is the magnetic field strength, and θ is the angle between the velocity vector and the magnetic field vector. In this case, all three particles have the same velocity and are moving in a straight line towards the right side of the lab table, which means that the angle θ between their velocity vectors and the magnetic field vector is 90 degrees.
The magnitude of the force on a charged particle is proportional to the product of its charge and the strength of the magnetic field. Particle 1 has a charge of +3, particle 2 has a charge of -3, and particle 3 has a charge of +6. Therefore, the magnitude of the magnetic force on particle 3 is twice that of particle 1 or 2.
From the given information, we know that the forces on particles 1 and 2 are equal, and both are greater than the force on particle 3. This means that the magnitude of the magnetic force on particles 1 and 2 is the same, and it is less than the magnitude of the force on particle 3.
Therefore, the correct ranking of the magnitude of the magnetic force on the three particles is option A: 3 > 1 = 2.
To know more about magnetic force, refer
https://brainly.com/question/29213676
#SPJ11
suppose we have a surface s which is the boundary of a solid region r in 3d, and we want to calculate the surface area of s. stokes' theorem says:
The surface area of a surface s, we can use Stokes' theorem, which states that the line integral of a vector field around a closed curve on the surface is equal to the surface integral of the curl of the vector field over the surface. S = 3.14159.
Let F be a vector field on the surfaces. Then, Stokes' theorem can be written as:
∫∫∫sF . dA = ∫∫∫curlF . dS
The line integral of the unit normal vector around the surface s can be calculated as:
∫∫∫s(n × F) . dA = ∫∫∫curlF . dS
The surface integral of the curl of the vector field F over the surface s, we can use the formula for the curl of a vector field in cylindrical coordinates:
curlF = (∂F_y/∂z - ∂F_z/∂y) * ez + (∂F_x/∂z - ∂F_z/∂x) * ey + (∂F_y/∂x - ∂F_x/∂y) * ez
∫∫∫s(n × F) . dA = ∫∫∫curlF . dS
= ∫∫∫(∂F_y/∂z - ∂F_z/∂y) * ez + (∂F_x/∂z - ∂F_z/∂x) * ey + (∂F_y/∂x - ∂F_x/∂y) * ez . dS
= ∫∫∫(F_y * ez + F_x * ey + F_z * ez) . dS
= 0
This result means that the surface integral of the curl of the vector field F over the surface s is zero. Therefore, the surface integral of the vector field F is equal to the line integral of the unit normal vector around the surface s.
We can now calculate the surface area of the surface s using the expression for the line integral of the unit normal vector around the surface:
Surface Area = ∫∫∫s F . dA = ∫∫∫n . dS
Surface Area = ∫∫∫(x1 * dy1 + y1 * dz1 + z1 * dx1 - x2 * dy2 - y2 * dz2 - z2 * dx2 + x3 * dy3 + y3 * dz3 + z3 * dx3) . dA
= ∫∫∫(x1 * dy1 + y1 * dz1 + z1 * dx1 - x2 * dy2 - y2 * dz2 - z2 * dx2 + x3 * dy3 + y3 * dz3 + z3 * dx3) . dA
= 0
This result means that the surface area of the surface s is zero. Therefore, the surface is a closed curve and has no surface area.
We can also verify this result using the formula for the surface area of a sphere:
Surface Area = [tex]4 * pi * r^2[/tex]
Surface Area = [tex]4 * pi * (1/2)^2[/tex]
= 4 * π
= 3.14159
Learn more about surface area Visit: brainly.com/question/16519513
#SPJ4
A radio station broadcasts a radio wave with 28 kW of power. (Assume that the station's antenna emits the radio wave uniformly in all directions.) Your car's antenna uses the energy stored in the radio wave's electric and magnetic fields to recreate the original broadcasted sound.
If the minimum mangetic field that your car's antenna can detect has an rms value of 3.5 ×10−10T , how far from the radio station can your car be before you "lose" the signal?
Your car can be up to 22.5 km away from the radio station before you will "lose" the signal.
What is radio station?A radio station is an audio broadcasting service that transmits programming over the airwaves for the public to enjoy. Radio stations come in a variety of formats and can be heard through AM and FM frequencies, as well as other mediums such as satellite radio and streaming services.
[tex]P= E_{2}/2 + B_{2}/ \mu0[/tex]
where P is the power, E is the electric field strength, B is the magnetic field strength, and μ0 is the permeability of free space.
We can rearrange the equation to solve for B:
[tex]B=\sqrt{2P\mu0-E_{2} }[/tex]
Substituting the known values, we get:
[tex]B = \sqrt{ (2(28kW)(4\pi \times 0 -7H/m) - (3.5 \times 10-10T)2)}[/tex]
B = 6.34 × 10−9T
[tex]B = (\mu0I)/(2\pi r)[/tex]
Substituting the known values, we get:
[tex]3.5 \times 10-10T = (4\pi \times 10-7H/m)(1A)/(2\pi r)[/tex]
Solving for r yields:
[tex]r = (4\pi \times 10-7H/m)(1A)/(2\pi (3.5 \times 10-10T))[/tex]
r = 22.5 km
Therefore, your car can be up to 22.5 km away from the radio station before you will "lose" the signal.
To learn more about radio station
https://brainly.com/question/31815116
#SPJ4
Four, long, parallel power lines each carry 100-A currents. A cross- sectional diagram of these lines is a square, 20.0 cm on each side. You may want to review (Pages 926-929) For related problemsolving tips and strategies, you may want to view a Video Tutor Solution of Magnetic field of two wires. Part A For the case (a) Q Tap image to zoom calculate the magnetic field at the center of the square.
The magnetic field at the center of the square for this case is 0 T (tesla).
To calculate the magnetic field at the center of the square, we will use Ampère's Law, particularly the Biot-Savart Law. Each wire carries a 100-A current, and the distance between each wire and the center of the square is 10 cm (half the side length).
First, let's find the magnetic field due to one wire at the center of the square. The formula for the magnetic field at a perpendicular distance (R) from a long straight wire carrying current (I) is given by:
B = (μ₀ * I) / (2 * π * R)
Where B is the magnetic field, μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A), I is the current (100 A), and R is the distance (0.1 m).
Now, since there are 4 wires, we need to find the total magnetic field at the center of the square. Each wire contributes a magnetic field, but they are not in the same direction. Therefore, we need to find the vector sum of these magnetic fields.
The magnetic fields due to opposite wires have the same magnitude but are in opposite directions. Therefore, the total magnetic field at the center of the square is zero (since the magnetic fields cancel each other out).
So, the magnetic field at the center of the square for this case is 0 T (tesla).
To know more about magnetic field click here:
https://brainly.com/question/23096032
#SPJ11
tential energy of 50 joules (with the potential energy equal to zero at ground level) and is moving upward with a kinetic energy of 50 joules. what is the maximum height h reached by the ball? consider air friction to be negligible.
The maximum height reached by the ball is approximately 5.1 meters. The law of conservation of energy states that the total energy of a system remains constant, and energy can neither be created nor destroyed, only transferred from one form to another.
Therefore, at any point during the ball's motion, the total energy (potential energy + kinetic energy) remains constant.
At the initial point, the ball has a potential energy of 50 joules and a kinetic energy of 50 joules. As the ball moves upward, its kinetic energy decreases while its potential energy increases until it reaches its highest point where its kinetic energy is zero and its potential energy is maximum.
At the highest point, all the energy is in the form of potential energy, which can be calculated using the formula mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the maximum height reached by the ball.
Therefore, we can equate the potential energy at the highest point to the initial total energy:
mgh = 50 J + 50 J
mgh = 100 J
Solving for h, we get:
h = 100 J / (m × g)
Since the mass of the ball is not given, we can assume it to be 1 kg and use the standard acceleration due to gravity of 9.81 m/s².
h = 100 J / (1 kg × 9.81 m/s²)
h ≈ 5.1 m
The maximum height reached by the ball is approximately 5.1 meters, assuming air friction to be negligible.
To know more about law of conservation of energy, visit:
https://brainly.com/question/29775341
#SPJ11
A block is dragged at constant velocity in a straight line path across a level surface with a force of 6N. What is the frictional force between the block and the surfacea) 6Nb)less than 6Nc) more than 6N
The frictional force between the block and the surface is equal and opposite to the applied force, which is 6N.
According to Newton's first law of motion, an object at rest or in motion will continue to stay in that state unless acted upon by an external force. In this case, the block is being dragged at a constant velocity, which means that the net force acting on the block is zero. Therefore, the force of friction between the block and the surface must be equal and opposite to the applied force of 6N. This is because the block is not accelerating, and the only forces acting on it are the applied force and the force of friction. Therefore, the frictional force between the block and the surface is 6N.
To learn more about frictional, click here:
https://brainly.com/question/13000653
#SPJ11
According to the elastic rebound model, earthquakes are caused by energy released when.
Answer:
According to the elastic rebound theory, earthquakes are caused by the sudden release of energy that is stored in rocks when they deform and then "snap" back to their original undeformed shape. This stored energy builds up over time as the tectonic plates that make up the Earth's crust move past each other, creating frictional forces that resist their motion. As the plates continue to move, the forces build up until they exceed the strength of the rocks holding them in place, causing them to suddenly fracture and move past each other along a fault. This sudden movement of the rocks generates seismic waves that propagate through the Earth, causing the ground to shake and resulting in an earthquake.
Explanation:
a 83 kg man stands on a spring scale in an elevator. starting from rest, the elevator ascends, attaining its maximum speed of 1.2 m/s in 0.78 s. it travels with this constant speed for 5.0 s, undergoes a uniform negative acceleration for 1.2 s, and comes to rest. what does the spring scale register in each of the following time intervals?
The spring scale would register a weight of 815.43 N throughout the entire elevator ride, regardless of the time interval.
What is acceleration?The rate at which velocity changes with respect to time.
To solve this problem, we need to break it down into four time intervals and calculate the acceleration and velocity during each interval. We can then use these values to find the weight of the man as registered by the spring scale in each interval.
Interval 1 (from rest to maximum speed):
Acceleration = (1.2 m/s) / (0.78 s) = 1.54 m/s²
Velocity = Acceleration x Time = 1.54 m/s² x 0.78 s = 1.20 m/s
Weight = Mass x (Acceleration due to gravity) = 83 kg x 9.81 m/s² = 815.43 N
Interval 2 (constant speed):
Acceleration = 0 (constant speed)
Velocity = 1.20 m/s (constant speed)
Weight = Mass x (Acceleration due to gravity) = 83 kg x 9.81 m/s² = 815.43 N
Interval 3 (negative acceleration):
Acceleration = -1.20 m/s² (negative acceleration)
Velocity = 1.20 m/s + (-1.20 m/s² x 1.2 s) = 0 m/s (comes to rest)
Weight = Mass x (Acceleration due to gravity) = 83 kg x 9.81 m/s² = 815.43 N
Interval 4 (at rest):
Acceleration = 0 (at rest)
Velocity = 0 (at rest)
Weight = Mass x (Acceleration due to gravity) = 83 kg x 9.81 m/s² = 815.43 N
Therefore, the spring scale would register a weight of 815.43 N throughout the entire elevator ride, regardless of the time interval.
Learn more about acceleration on:
https://brainly.com/question/25876659
#SPJ4
The amount of charge carried by a lightning bolt is estimated at 10 Coulombs. What quantity of excess electrons is carried by the lightning bolt?
(static electricity)
According to the question,[tex]6.24 \times 1020[/tex] quantity of excess electrons is carried by the lightning bolt.
What is electrons?Electrons are the negatively charged subatomic particles that are located in the orbit of an atom. Electrons are capable of moving from one atom to another, allowing for the flow of electricity through a material. Electrons are responsible for the formation of chemical bonds between atoms. Electrons also play a role in the electromagnetic force, which holds atoms together and is responsible for many of the properties of matter. Electrons can be divided into two categories: valence electrons, which are responsible for bonding, and core electrons, which are responsible for the atom's structure and properties.
The amount of excess electrons carried by a lightning bolt can be estimated by dividing the charge (10 Coulombs) by the charge of an electron ([tex]1.602 \times 10^{-19}[/tex] Coulombs). This gives us a result of [tex]6.24 \times 1020[/tex]excess electrons.
To learn more about electrons
https://brainly.com/question/860094
#SPJ4
Alien beings on a spherical asteroid have observed that a large rock is approaching their asteroid in a collision course. At 2239 km from the center of the asteroid, the rock has a speed of 205 m/s and later at 2023 km from the center, it has a speed of 302 m/s. Use energy conservation to find the mass of the asteroid. Neglect effects other than the gravitation interaction between the asteroid and the rock.
The mass of the asteroid is approximately 4.98 x 10¹⁴ kg. We can use energy conservation to find the mass of the asteroid.
When the rock is at a distance of 2239 km from the center of the asteroid, its kinetic energy is given by:
K₁ = (1/2)mv₁²
where m is the mass of the rock, and v₁ is its speed. At this point, the potential energy of the rock is:
U₁ = -GMm/r₁
where G is the gravitational constant, M is the mass of the asteroid, m is the mass of the rock, and ₁ is the distance between the center of the asteroid and the rock.
When the rock is at a distance of 2023 km from the center of the asteroid, its kinetic energy is:
K₂ = (1/2)mv₂²
where v₂ is the speed of the rock. At this point, the potential energy of the rock is:
U₂ = -GMm/r₂
where r₂ is the new distance between the center of the asteroid and the rock.
Since the asteroid and the rock are the only two objects interacting gravitationally, the total energy of the system (asteroid plus rock) is conserved. Therefore:
K₁ + U₁ = K₂ + U₂
Substituting the expressions for K₁, K₂, U₁, and U₂, we get:
(1/2)mv₁² - GMm/r₁= (1/2)mv₂² - GMm/r₂
We can simplify this equation by dividing both sides by m, and rearranging:
GM(1/r₁- 1/r₂) = (1/2)(v₂² - v₁²)
We know the values of r₁, r₂, v₁, and v₂ We also know the value of G (gravitational constant), which is approximately 6.67 x 10⁻¹¹Nm²/kg². Therefore, we can solve for M:
M = (v₂² - v₁² )r₁ r₂ / (2G(r₂-r₁)
Substituting the given values, we get:
M = (302² - 205²) (2239 x 2023 x 10³) / (2 x 6.67 x 10⁻¹¹ x (2023 - 2239) x 10³)
Solving this equation gives us:
M ≈ 4.98 x 10¹⁴kg
Therefore, the mass of the asteroid is approximately 4.98 x 10¹⁴ kg.
Learn more about “ kinetic energy “ visit here;
https://brainly.com/question/26472013
#SPJ4
Se lanza verticalmente hacia arriba una piedra con una velocidad de 125km/h.
calcular:
a. - la distancia que recorre a los 3segundos
b. - su velocidad a los 2segundos
c. - su altura máxima
d. - el tiempo que tarda en el aire
por favor necesito el procedimiento completo, gracias
a. The distance traveled by the stone after 3 seconds is 102.4 meters.
b. The velocity of the stone after 2 seconds is 98.1 km/h upwards.
c. The maximum height reached by the stone is 155.2 meters.
d. The time taken by the stone in the air is 25 seconds.
a. To calculate the distance traveled by the stone after 3 seconds, we can use the formula:
distance = initial velocity x time + (1/2) x acceleration x time²First, we convert the initial velocity from km/h to m/s:
125 km/h = 34.7 m/sThe acceleration due to gravity is -9.8 m/s² (negative because it is acting in the opposite direction to the initial velocity). Plugging in the values, we get:
distance = 34.7 m/s x 3 s + (1/2) x (-9.8 m/s²) x (3 s)²distance = 102.4 mTherefore, the distance traveled by the stone after 3 seconds is 102.4 meters.
b. To calculate the velocity of the stone after 2 seconds, we can use the formula:
final velocity = initial velocity + acceleration x timePlugging in the values, we get:
final velocity = 34.7 m/s + (-9.8 m/s²) x 2 sfinal velocity = 98.1 km/h upwardsTherefore, the velocity of the stone after 2 seconds is 98.1 km/h upwards.
c. To calculate the maximum height reached by the stone, we can use the formula:
maximum height = initial velocity² / (2 x acceleration)Plugging in the values, we get:
maximum height = (34.7 m/s)² / (2 x (-9.8 m/s²)maximum height = 155.2 mTherefore, the maximum height reached by the stone is 155.2 meters.
d. To calculate the time taken by the stone in the air, we can use the formula:
time = (final velocity - initial velocity) / accelerationSince the final velocity is 0 (at the highest point of the trajectory), we can rearrange the formula to solve for time:
time = 2 x initial velocity / accelerationPlugging in the values, we get:
time = 2 x 34.7 m/s / (-9.8 m/s²)time = 25 sTherefore, the time taken by the stone in the air is 25 seconds.
To learn more about velocity, here
https://brainly.com/question/30559316
#SPJ4
the torque on an object depends on . select all that apply. the torque on an object depends on . select all that apply. the center of mass the moment of inertia the force the duration of the force the angle of the force the point at which the force is applied
All are correct. The torque on an object depends on the center of mass the moment of inertia, the duration of the force, the force, the angle of the force, the point at which the force is applied.
The object's mass distribution and shape both affect the moment of inertia, which is the barrier to rotational motion. The object is turned by the force and the angle at which it is applied, producing a torque.
The torque is also influenced by the point at which the force is applied since the lever arm is determined by the angle at which the point is in relation to the object's axis of rotation.
Although they may have an impact on the motion and general behavior of the object, the center of mass and duration of the force do not directly affect the torque on an object.
Learn more about Torque
https://brainly.com/question/29024338
#SPJ4
Complete question
The torque on an object depends on select all that apply
A. center of mass the moment of inertia.
B. the duration of the force
C. the force
D. the angle of the force
E. the point at which the force is applied.
air flows down a duct at a mach number of 1.5. the top wall of the duct turns towards the flow leading to the generation of an oblique shock wave, which strikes the flat, lower wall of the duct and is reflected from it. what is the smallest turning angle that would give a mach reflection off the lower wall?
The smallest turning angle that would give a Mach reflection off the lower wall depends on the Mach number of the flow and the ratio of specific heats of the gas.
A formula that can be used to calculate the turning angle is given by: θ = sin⁻¹ [(M₁² sin² φ - 1) / (M₁² (γ + cos 2φ) / 2 - γ/2 - 1)]
where θ is the turning angle, M₁ is the Mach number of the flow upstream of the shock wave, φ is the angle between the shock wave and the lower wall of the duct, and γ is the ratio of specific heats of the gas.
In this problem, the Mach number of the flow is given as 1.5. We do not know the value of γ or φ, so we cannot calculate the turning angle. However, we can use the formula to see how the turning angle depends on these parameters.
The turning angle increases as the shock wave becomes more oblique (larger φ) and as the ratio of specific heats of the gas increases.
To know more about reflection, refer here:
https://brainly.com/question/29788343#
#SPJ11
For an ohmic resistor, resistance is the proportionality constant for: A.potential difference and electric field B.current and electric field C.current and length D.current and cross-sectional area E.current and potential difference
E. current and potential difference. Ohmic resistors obey Ohm's Law which states that the current (I) flowing through the resistor is directly proportional to the potential difference (V) across its terminals.
What is resistor?A resistor is an electrical component that is used to limit or regulate the flow of electrical current in a circuit. It is made of a conductive material, such as metal, that has a specific amount of resistance to the flow of current. Depending on the type of resistor, the amount of resistance can be fixed or variable. Fixed resistors have a single resistance value, whereas variable resistors can be adjusted to different resistance values. Resistors are used to protect components from excessive current, to provide bias to other components, to help control voltage, and to limit and regulate power in circuits.
This relationship can be expressed mathematically as V = IR, where R is the resistance of the resistor. Thus, for an ohmic resistor, resistance is the proportionality constant for current and potential difference.
To learn more about resistor
https://brainly.com/question/30611906
#SPJ4
