Those that harden under strain, such as the aluminum-magnesium alloys used in beverage cans and the copper-zinc alloy, brass, used for cartridges, which show more strain hardening than pure copper or aluminum, respectively.
When a material is deformed under a substantial amount of strain, strain hardening is seen as a strengthening process. Lamellar crystals and chain molecule orientation on a vast scale are the culprits. When plastic materials are stretched past their yield point, this phenomena is frequently seen. When a metal is stretched past its yield point, strain hardening occurs. The metal appears to get stronger and harder to deform as more stress is needed to cause additional plastic deformation. Strain hardening is directly related to fatigue.
Learn more about strain hardening here-
https://brainly.com/question/15058191
#SPJ4
A recent online start-up just invested millions of dollars into new technology for their firm. Which of the following goals were they MOST likely trying to achieve?
A
specialization
B
economic growth
C
price stability
D
price stability
Answer:
i think D
Explanation:
Identify several areas in which a risk manager should be knowledgeable?
At least five fundamental components must be considered when creating a framework for risk management. They are risk governance, risk reporting and monitoring, risk reporting and assessment, risk mitigation, and risk identification.
What are the risk manager should be knowledgeable?They are aware of the potential effects those risks could have on the company and what preventative measures or backup plans should be put in place.
In order to set objectives or budgets, it is essential to analyze your growth and performance, which analytics help you do.
Risk managers find it challenging to reflect on the past or plan for the future without analytics. They make it straightforward to raise any company's productivity and effectiveness.
Therefore, risk managers are aware of all potential risks in their domain and, if feasible, beyond.
Learn more about risk manager here:
https://brainly.com/question/4680937
#SPJ2
what is saxophone ?????
Answer:A saxophone is a instrument
Explanation:type of single-reed woodwind instrument with a conical body, usually made of brass. As with all single-reed instruments, sound is produced when a reed on a mouthpiece vibrates to produce a sound wave inside the instrument's body.
An engineer spends all of his free time (outside of work) gambling illegally. is this a violation of ethical standards?
Answer: yes
Explanation:
Walter is editing the camera in his workspace. If he wants to adjust how much of the
scene can be seen at once, what property can he edit?
(1 point)
viewport
O spatial audio
O LODS
O field of view
Since Walter is editing the camera in his workspace, if he wants to adjust how much of the scene can be seen all at once, the property which he can edit is: D. field of view.
Who is a camera operator?A camera operator can be defined as an individual who is professionally trained to tweak, operate and use a digital camera, especially for the purpose of taking pictures or images (photographs) of an event, place, person, etc.
What is a camera lens?A camera lens can be defined as a transparent optical instrument that is used in conjunction with a digital camera, so as to refract the rays of light coming into the lens.
What is a field of view?A field of view can be defined as a range of the observable physical world that is visible to a camera operator at any period of time, especially through the human eye, on a display monitor (screen), or a digital camera viewfinder.
In this context, we can reasonably infer and logically deduce that the property which Walter can edit is the field of view of his digital camera.
Read more on digital camera here: brainly.com/question/22789334
#SPJ1
What device converts thermal energy to kinetic energy
Answer:
heat engines
Explanation:
These devices are called heat engines. For example, in a steam engine, pistons remove some thermal energy from hot gases. The steam engine then uses these moving pistons to power whatever it is hooked up to, thus converting thermal energy into kinetic energy.
Hope this helped and have a good day
Charles knows that adding salt to water causes the freezing point of water to be lowered, but he wants to know if rock salt affects the freezing point more than table salt.
Charles performed an investigation in his classroom in which he measured the freezing point of 250 mL of water. He used this measurement as his control. Then, he dissolved equal amounts of rock salt and table salt in two identical 250 mL beakers of water. Finally, he measured the freezing points of each beaker of water, analyzed his results, and formed a conclusion.
What type of investigation did Charles perform?
Since Charles performed an investigation in his classroom in which he measured the freezing point of 250 mL of water, the type of investigation that Charles perform is known as option C: laboratory experiment.
What is a laboratory experiment?The term Laboratory experiments is known to be a term that connote any for of research method which is one where researchers are known to make controllable environments so that they can be able to test hypotheses.
Note that Laboratories are known to be used for academic research such as rooms or specifically set up spaces.
Therefore, based on the above, one can say that since Charles performed an investigation in his classroom in which he measured the freezing point of 250 mL of water, the type of investigation that Charles perform is known as option C: laboratory experiment.
Learn more about experiment from
https://brainly.com/question/17274244
#SPJ1
Charles knows that adding salt to water causes the freezing point of water to be lowered, but he wants to know if rock salt affects the freezing point more than table salt. Charles performed an investigation in his classroom in which he measured the freezing point of 250 mL of water. He used this measurement as his control. Then, he dissolved equal amounts of rock salt and table salt in two identical 250 mL beakers of water. Finally, he measured the freezing points of each beaker of water, analyzed his results, and formed a conclusion. What type of investigation did Charles perform? A. observational field study B. collection of specimens C. laboratory experiment D. model-building
Small particles in your power steering system may
Small particles in your power steering system may Damage the hydraulic pump.
Check more about the reason for the above in the power steering system below:
What is the Small particles about?If a person is said to have notice that there is small black particles that can be seen inside of the power steering reservoir, there is therefore some chances that are these are some piece of the hose, instead of the pump or rack.
Since High-temperature pulsations can be able to lead the power steering hoses to be destroyed from the inside.
Therefore, based on the above, one can say that Small particles in your power steering system may Damage the hydraulic pump.
Learn more about power steering system from
https://brainly.com/question/21346765
#SPJ1
What devices converts electrical energy to gravitational energy
Answer:
motor
Explanation:
Most motors use electromagnets to cause mechanical rotation, which can do work.
How did the chinese prepare their iron differently than their western counterparts?.
Draw Shear and Moment Diagrams for the beam shown blow, and find the Reactions, Vmax, and Max. Answer the following questions, and you can also upload a file showing the calculations at the end of the quiz.
15 kips
35 kips
12 kips
- 1.2 kips/ft
A
6'-0"
B
9'_0"
14'_0"
10'-0"
Answer: Can't help
Explanation:
What is an SQL operator to check whether an attribute value matched any value within the given list of values?
The IN operator is indeed a logical operator that lets you see if a given value matches any value in a list.
What is an IN operator?In a where clause, you can use the IN operator to specify multiple values. The IN operator denotes multiple OR conditions.
The IN operator is used in the where clause to specify a list of values or a sub query. In the parenthesis, a sub-query or list of values must be specified, such as IN (value1, value2,...) or IN (Select query)
IN is a SQL operator that determines whether an attribute value matched any of the values in the given list.
Thus, the answer is IN operator.
For more details regarding SQL operator, visit:
https://brainly.com/question/20713669
#SPJ1
Electricity is the flow of electrons from a negatively charged
material to a positively charged material.
Answer- TRUE
What is required for measuring the sanitizing rinse temperature in a high-temperature dishwashing machine?.
The maximum registering thermometer is required for measuring the sanitizing rinse temperature in a high-temperature dishwashing machine.
What is a dishwashing machine?A dishwashing machine can be designed as a mechanism through which various this she as cutlery or crockery is being watched. The machine uses water, heat, and air pressure to clean the dishes.
The heat capacity at the plenum should always be monitored by a constructed meter on the dishwashing.
The maximum registering thermometer takes the temperature into notice and takes that this will be the recorded temperature.
Learn more about dishwashing machine, here:
https://brainly.com/question/14298877
#SPJ1
What are the six steps of engineering ( in order)
Answer:
Hope this helps :)
1. Define/Find the problem.
2. Explore/Research/Collect information.
3. Design the best solution base on your ideas/thoughts.
4. Create the solution.
5. Try the creation, put it to test/work.
6. Make the creation better, modify it.
Also, some additional steps are ...
7. Evaluate the solution, finishing thoughts/ideas.
8. Share your results with other engineers/people, final steps
Tech a says that a brake-by-wire system can start to apply brakes before the driver can step on the brake pedal. tech b says that brake-by-wire systems use heavy cables to transmit the brake pedal force to the wheel brake units. who is correct?
A brake-by-wire technology, according to Tech A, applies individual braking units to each wheel.
There are three different types of brake-by-wire technologies being used in the automotive industry to advance braking systems: electro-hydraulic, entirely electric, and a hybrid of the two. A brake booster is not required thanks to the electro-hydraulic system. Although there aren't any entirely drive-by-wire production cars yet, several car makers have created concept cars that satisfy the bill. To put it another way, a drive-by-wire system uses an electrical signal to instruct the engine on how much power to produce. The latter (drive-by-cable) still transmits data from the accelerator pedal to the engine through a mechanical cable.
Learn more about braking here-
https://brainly.com/question/19755465
#SPJ4
1.3
A tensile load of 50,000 lb is applied to a metal bar with a 0.6 in. x 0.6 in.
cross section and a gauge length of 2 in. Under this load, the bar elastically
deforms so that the gauge length increases to 2.007 in. and the cross section
decreases to 0.599 in. x 0.599 in. Determine the modulus of elasticity and
Poisson's ratio for this metal.
Answer:
modulus =3.97X10^6 Ib/in^2, Poisson's ratio = 0.048
Explanation:
What traffic sign is this
Answer:
Stop Sign
Explanation:
It's red and shaped like an octogon
Which documents are required to be carried aboard each domestic air carrier flight?
Answer:
Completed load manifest, dispatch release and flight plan
1.) What is the purpose of measuring tape? What would you measure and why? (1 paragraph, 5 sentences)
Answer:
The measuring tape is used to measure objects. It makes objects with two faces easier to measure, as it would be more difficult to use a ruler to measure two faces. You measure to increase accuracy. If you're trying to build something out of 12 inches of wood, you can't just look at the wood and assume it is 12 inches long. In engineering, it's necessary to measure during every project.
Explanation:
what is a mine headgear
Answer:
The whole lifting system is called the headgear. There are four main parts to a mine's headgear: Part 1: The winch or hoist is in a winding house. This part of the system is used to wind or unwind the steel cable. The hoist is attached to a motor and a control system.
Explanation:
Bejsickwnanciodkwbdjxiwnsnxbx
Answer:
is it a free point? or just a question if it is kindly respond
2. Because she has a Victim mindset and having low grade in her Math class, Julianna believes
O a. her low grades are the fault of her unfair teacher.
O b. she needs to take an easier class.
O c. that working with a tutor is the only way for her to pass the class.
O d. she can improve her grades if she studies more.
Because she has a Victim mindset and having low grade in her Math class, Julianna believes: A. her low grades are the fault of her unfair teacher.
What is a Victim mindset?A Victim mindset is also referred to as victim mentality and it can be defined as an acquired personality trait in which an individual tends to recognize and believe that the negative and unfair actions of others towards him or her, is responsible for the bad and unpleasant things that happens.
This ultimately implies that, an individual with a Victim mindset is prejudiced and strongly believes that every other person is against him or her, and as such these people are responsible for their failures.
Read more on Victim mindset here: https://brainly.com/question/17116209
#SPJ1
Consider an incandescent lightbulb. If you wanted to turn a 10-w lightbulb into a 100-w lightbulb, how would you change the temperature of the filament inside the bulb?.
The temperature of the filament within the lightbulb can be altered by a factor of 10²⁵ by applying the blackbody radiation formula.
To tackle this issue, we need to understand black body radiation. A black body object's energy emission is inversely proportional to its area and the temperature to the fourth power. It can be calculated using the formula P = A e. T4, where is Stefan Boltzmann's constant (5.67x10⁸W/m/2K4), P is power, A is surface area, e is emissivity, and A is surface area.
We can deduct from the previous query that P1 = 10 watts and P2 = 100 watts.
The temperature ratio is T14/T24 = P1/P2 according to the black body radiation formula, which means that T2 = (T1*10⁴)/4
T2=T1 x 100²⁵.
As a result, the filament's internal temperature is altered by a factor of 10²⁵.
Learn more about temperature here-
https://brainly.com/question/11464844
#SPJ4
2. A Master Cylinder with an internal leak can have all of the following symptoms except:
OA. Brake Pedal loses firmness
OB. Soft or Spongy Pedal
OC. Fluid dripping on the Booster
OD. Pedal regains firmness after being released and repressed
Go
A Master Cylinder with an internal leak can have all of the following symptoms except: D. pedal regains firmness after being released and repressed.
What is a braking system?A braking system can be defined as a mechanical system which comprises various components that are designed and developed to bring an automobile vehicle in motion to a stop, when applied by a driver.
How to diagnose a brake system?In order for a technician to diagnose a brake system, the following symptoms should be adequately and appropriately checked and used by the technician:
NoisesSmellsAbnormal brake pedal movements.Improper braking action.What is the Master Cylinder?Generally speaking, a Master Cylinder is an important component of an automobile vehicle's braking system which is designed and developed to transform (convert) mechanical pressure generated by the brake pedal into hydraulic pressure.
In Automobile engineering, a Master Cylinder with an internal leak can have all of the following symptoms:
Brake pedal loses firmness.Soft or spongy pedal.Fluid dripping on the booster.Read more on braking system and Master Cylinder here: https://brainly.com/question/14237448
#SPJ1
Discussion Topic
Ergonomically designed workstations and equipment reduce stress-related injuries and
improve the productivity and efficiency of people who spend long hours in the workplace.
Discuss how ergonomics can also be used in the classroom environment to improve a
student's ability to focus on learning.
Summary:
Ergonomics can be used to improve a student’s ability to focus on learning for say, when writing a long essay. Ergonomics helps with keeping the wrists comfortable with an ergonomic writing utensil and not straining the back with a comfortable sitting position. It helps with eye strain, keeping students at a comfortable distance from the board. And it reduces distractions to improve focus.
Longer version:
Sitting posture is a very important ergonomic factor which could influence a student's focus. Bad sitting posture could be caused by the height of chair and the desk position. Bad sitting posture often affects a child's level of attention or focus. Hence, choosing a an appropriate table and chair combination for different height measures should be considered. The distance between students and the lecture board should be considered as students have varying preferences. Hence, taking note of a comfortable distance for each student is an important concept. The removal of distractive elements in the classroom environment is also an ergonomic concept which could improve focus. Therefore, the concept of ergonomics applied in classroom environment could help improve student's focus.
Answer: Comfortable Furniture, Lighting, Reduced Noise, Correct Posture.
Explanation:
In My opion Ergonomics can be used significantly in the classroom environment to improve a student's ability to focus on learning in the following ways;
Comfortable furniture: By providing comfortable furniture such as desks, chairs, and tables, the students will be able to focus on learning for a more extended period.
Lighting: Adequate lighting in the classroom is essential for students as it can prevent eye strain and headaches.
Reduced noise: An environment with reduced noise will help students concentrate better on their studies.
Correct posture: Ergonomics can be used to promote the right posture among students while studying. Poor posture can cause health issues such as backaches and neck pain, which can negatively affect a student's ability to focus on learning.
In conclusion, ergonomics can significantly improve a student's ability to focus on learning by providing comfortable furniture, adequate lighting, reduced noise, and promoting correct posture.
Crude oil at 20 c fills the space between two concentric cylinders 250 mm high and with diameters of 150 mm and 156 mm. Find the torque is required to rotate the inner cylinder at 12 r min, the outer cylinder rernaining stationary
the torque is required to rotate the inner cylinder at 12 r min, the outer cylinder remaining stationary is 11.0807 N-m.
we have left out some other important details, such as the time required to reach that rpm, whether the beginning state is at rest, and the axis around which the cylinder is revolving. However, we'll suppose that it will be 60 seconds (time is necessary to convert rpm to angular acceleration)
rotation around the center axis
Angular acceleration = torque + MOI
Currently, angular acceleration equals 2 rpm/(t 60).
In order to avoid getting an extremely high figure, we estimated that the diameter of the cylinder was 600 mm rather than 600 meters: angular acceleration= 1.047 rad/s² MOI for cylinder across center dia= 1/4MR²+ 1/12ML²
MOI= 10.5833 kg-m
Now, the product of these two is torque.
11.0807 N-m of torque
Various MOI equations can be used to compute for different axes of rotation.
Learn more about Acceleration here-
https://brainly.com/question/12550364
#SPJ4
The complete question is:
Crude oil at 20 c fills the space between two concentric cylinders 250 mm high and with diameters of 150 mm and 156 mm. Find the torque is required to rotate the inner cylinder at 12 r min, the outer cylinder remaining stationary.
What device pushes the starter pinion gear into mesh with the ring gear when the ignition switch is in the start position?
The plunger or lever is the device that pushes the starter pinion gear into mesh with the ring gear when the ignition switch is in the start position.
What is a pinion?The pinion is a special gear and spring assembly. The gear is extended into the gearbox case and engaged with the flywheel after the starter is turned on. In order to start the combustion process, the engine spins.
Before turning to start the engine, the pinion engages with the ring gear. A free wheel clutch prevents the pre-engaged starter motor from overspeeding when the engine accelerates.
Therefore, the plunger or lever is the device that pushes the starter pinion gear into mesh with the ring gear when the ignition switch is in the start position.
Learn more about pinion on:
https://brainly.com/question/13701362
#SPJ1
