Is bf3 polar or non polar?.

Option ( c) is correct. MnO is most ionic. Because it has lowest magnitude positive charge.

The ionic compounds are the chemical compounds composed of ions held together by electrostatic forces. The bond is called ionic bond. The compound consists of positively charged ions called cations and the negatively charged ions called anions. Manganese oxide is most ionic because it has lower oxidation state. Lower the charge on metal more is the ionic character. larger the charge more is the covalent character. Ionic compounds are hard and brittle. It has high melting and boiling points. They are electrically insulating as solids. the ions become highly conductive when melted.  Ionic compounds can be synthesized from their constituent ions through solvent evaporation and precipitation.

To learn more about Ionic compounds please visit:

https://brainly.com/question/29730254

#SPJ4

6.07 x 10-2  moles of kf are contained in 347 g of water in a 0. 175 mol kg-1 kf solution

What does the word "molality" mean?

The quantity of a material dissolved in a given mass of solvent is known as its molality (m), also known as molal concentration. The moles of a solute per kilogram of a solvent are how it is defined. The word "molality" is derived from the word "molarity," which refers to a solution's molar concentration.

The mole is the volume of a system that has the same number of atoms in 0.012 kilograms of carbon 12 as there are elementary particles.

The given mass of water, m1 is 347g

Molality, m is 0.175mol/kg

347 g of water is the same as 347 ml  (since 1 ml of water has a mass of 1 gram) which is 0.347 L.

KF is therefore equal to 0.17 * 0.347 i.e. 6.07 x 10-2.

To learn more about molality use link below:

https://brainly.com/question/1370684

#SPJ4

The inorganic substance with the chemical formula BaSO4 is barium sulfate (or sulphate). It is a tasteless, crystalline white substance that is insoluble in water.

A barium cation and a sulfate anion are the two elements that make up barium sulfate. There are four oxygen atoms joined to the sulfur. A sulfate salt of barium, known as BaSO4, is present in the mineral barite. It is a white crystalline substance that is soluble in strong acids but insoluble in water and alcohol.

Elements include both barium and bromine. Barium is a metal belonging to Group 2 of the modern periodic table, and bromine is a non-metal belonging to Group 17 (halogen).

To know more about chemical formula visit:-

https://brainly.com/question/29031056

#SPJ1

Neon lights and fireworks are both types of light sources that produce bright and colorful displays. However, the main difference between them is that neon lights are a continuous source of light, whereas fireworks are a transient source of light.

Neon lights produce light through the process of gas discharge, where an electric current is passed through a gas-filled tube, causing the gas to emit light. The light is produced by the excitation of atoms within the gas, which then release photons as they return to their ground state.

Fireworks, on the other hand, produce light through a chemical reaction, where a mixture of chemicals is ignited, producing a burst of light and color.

The light is produced by the energy released during the chemical reactions, which excites the atoms and molecules within the fireworks, causing them to emit light. The main difference is that neon lights rely on a continuous energy source while fireworks rely on a chemical reaction.

For more questions like  Neon lights click the link below:

https://brainly.com/question/28603659

#SPJ4

Correctly paraphrased question:

What similarities and differences can you identify between neon signs and fireworks? What might be happening at the atomic level ti explain the difference?

To calculate velocity,the formula is v = x/t. Average velocity is total change in displacement divided by total change in time. v = dx/dt is the formula for instantaneous velocity.

Velocity is defined as a vector measurement of the rate and direction of motion. Put simply, velocity is the speed at which something moves in one direction. The speed of a car traveling north on a major freeway and the speed a rocket launching into space can both be measured using velocity.

As you might have guessed, the scalar (absolute value) magnitude of the velocity vector is the speed of motion. In calculus terms, velocity is the first derivative of position with respect to time. You can calculate velocity by using a simple formula that includes rate, distance, and time.

Learn more about velocity at https://brainly.com/question/18084516.

#SPJ4

Almost all stoichiometric problems can be resolved in only four easy steps.

To learn more about stoichiometric problems refer to:

https://brainly.com/question/22685837

#SPJ1

Since the majority of the molecules in this chemical class are created by combining carbon and water, the term "carbohydrate" derives from this.

Only the domain Eukarya contains multicellular, visible organisms like humans, animals, plants, and trees. Many microorganisms, including fungi, algae, and micro-animals, inhabit this region as well. Viruses are nonliving agents, hence they are excluded from the major categories of microorganisms. Single-celled or multicellular eukaryotic creatures are both possible.

There are three domains: Archaea, Bacteria, and Eukarya. Prokaryotic organisms fall under the domains Archaea or Bacteria, while eukaryotic organisms fall under the category Eukarya. Archaea. In terms of size and structure, archaea resemble bacteria but have a greater range of cell forms.A domain, also known as a dominion, superkingdom, realm, or empire, is the highest taxonomic rank that may be assigned to an entire group of organisms in biological taxonomy.

To learn more about carbohydrate refer to :

https://brainly.com/question/797978

#SPJ4

The CH3Cl possesses a net dipole because the C-Cl link is polar, making it polar as well.

A covalent bond is formed when two atoms exchange one or more pairs of electrons. The two atomic nuclei are concurrently drawing these electrons to them. When the difference between the electronegativities of two atoms is too tiny for an electron transfer to take place to create ions, a covalent bond is formed.

A polar covalent bond is a bond created by exchanging electrons between two atoms with different electronegativities.

The CH3Cl possesses a net dipole because the C-Cl link is polar, making it polar as well.

To know more about Polar bonds, visit,

https://brainly.com/question/29144393

#SPJ4

There are 45g in 2. 5 moles of H2O

The "counting unit" used by chemists to describe the quantity of atoms, ions, molecules, or formula units in a specific chemical sample is called a mole. The mole is comparable to other counting units you have employed in the past, such as pair (2), dozen (12), and gross (144). Avogadro's number (6.022 x 10₂₃) of molecules (or formula units) make up one mole of a substance (ionic compound).

The mass of 1 mole of a chemical is indicated by its molar mass. It provides you with the amount of grams per mole of a substance, to put it another way. Therefore, grams/mole are the units for molar mass. so to find mass of compoud you need to multiplying the moles to the mass molar

mass = moles x mass molar

mas 2.5 moles of water (H₂O) = 2.5 moles ×(2+16)g/ moles

mas 2.5 moles of water (H₂O) =45g

Learn more about mass at https://brainly.com/question/29769894

#SPJ4

Answer:

A. Avogadro's constant

Explanation:

Avogadro's constant is a conversion factor that converts particle count to moles.  One mole is 6.02x10^23 particles.  The is written as (6.02x10^23 particles)/(1 mole particles.

The correct translation for a pure metal in a chemical equation is as follows: the pure metal is translated into its elemental symbol with no subscripts (option C).

A pure metal is any metal that have not been alloyed with other metallic elements.

This means that pure metals are metals that are not mixed with other metals and are made of only one type of element.

Examples of pure metals are copper, aluminium, gold. In a chemical equation, the pure metals exist as a single element with no subscript attached.

Therefore, it can be said that option C is the correct description of a pure metal.

Learn more about pure metal at: https://brainly.com/question/3162613

#SPJ1

The timing of when lake-effect snow stops depends on several factors, including the temperature and wind patterns. Typically, lake-effect snow will stop when the temperature warms up, or when the wind direction changes so that it is no longer blowing over the lake.

Lake-effect snow is a type of precipitation that occurs when cold air moves over a large body of relatively warm water, such as a lake. The air picks up moisture from the lake and as it rises, it cools and the moisture condenses into snow.

The snowfall can be intense and localized, and it typically stops when the temperature inversion breaks down, or when the wind direction changes so that it is no longer blowing over the lake.

In general, lake-effect snow is most common in the winter and early spring, when the temperature contrast between the lake and the surrounding land is greatest. The timing of when it stops can vary depending on the specific weather conditions at the time.

Learn more about Snow from

https://brainly.com/question/15919831

#SPJ1

78.3 Torr would be the vapor pressure of a mixture of 80 g of ethanol and 97 g of methanol at 293 k

This question can be answered using Raoult's law and Dalton's law of partial pressure.

Raoult's law: Raoult postulated a mathematical relation between partial pressure and mole fraction. This connection is known as Raoult's Law, which asserts that the partial vapour pressure of each volatile component in a solution (obtained by dissolving a solute in a solvent) is directly proportionate to its mole fraction. The formula can be given by:

p₁= p₁⁰x₁        p₂=p₂⁰x₂

Here x denotes the mole fraction

p⁰ denotes the pressure in pure state.

Dalton's law: Dalton's law of partial pressure states that a gas mixture's total pressure is equal to the sum of its component gases' partial pressures. The pressure that each gas would produce if it filled the same volume of the mixture by itself at the same temperature is known as the partial pressure.

Mathematically,

p= p₁ + p₂

here p is the total pressure.

Now according to the given question

given mass of ethanol= 80 gm

moar mass of ethanol= 46 gm/mol

no. of moles= [tex]\frac{given mass}{molar mass} = \frac{80}{46} = 1.7 moles[/tex]

given mass of methanol= 97gm

molar mass of methanol= 32 gm/mol

no. of moles= [tex]\frac{given mass}{molar mass} = \frac{97}{32} = 3 moles[/tex] (approx.)

total number of moles= 1.7+3= 4.7 moles

mole fraction x for ethanol= [tex]\frac{1.7}{4.7} =0.36[/tex]

mole fraction of methanol= 1-0.36= 0.64

given pressure of ethanol in pure state= 97.7 Torr

given pressure of methanol in pure state= 44.6 Torr

Now from dalton's ;aw

total pressure is the sum of product of partial fraction and pressure in pure state for individual liquids.

P(total)= 0.36×44.6+ 0.64× 97.7= 78.3 Torr

We can learn more about partial pressure here:

https://brainly.com/question/13199169#

#SPJ4

If a beaker of tetrahydrofuran is put inside a sealed tank containing tetrahydrofuran gas at 63 degrees Celsius and 810 torr, after ten minutes, the liquid in the beaker will evaporate and the amount of liquid in the beaker will decrease.

This is due to the fact that at a higher temperature and pressure, the vapour pressure of the liquid tetrahydrofuran in the beaker will increase, which means that more molecules of tetrahydrofuran will escape from the liquid phase into the gas phase. This process is known as evaporation. As more molecules of tetrahydrofuran evaporate from the liquid in the beaker, the amount of liquid in the beaker will decrease.

The pressure inside the tank is 810 torr and this pressure is greater than the vapour pressure of tetrahydrofuran at 63 degrees C, meaning that the vapour pressure of the liquid tetrahydrofuran will be less than the pressure inside the tank, it will escape to the gas phase, therefore the amount of liquid in the beaker will decrease.

Learn more about Evaporation here: https://brainly.com/question/5019199

#SPJ4

Answer: 2500J

Explanation: The formula of Kinetic Energy is 1/2mv^2

where m = mass of an object

            v = velocity of an object

Therefore, Kinetic energy = 1/2*500*(5)^2

                                              = 2500/2

                                              = 1250 J

The question must be What is the kinetic energy of an object of mass 500kg and velocity 5m/s^2 ?

The principle of faunal succession is a key concept in the study of prehistoric life and the age of sedimentary rocks. It is based on the idea that the fossilized remains of different species of animals and plants found in sedimentary rocks can be used to infer the relative age of the rocks and the conditions that existed when they were formed.

The principle of faunal succession states that over time, the species of animals and plants that lived in a particular area changed and evolved. As a result, the fossilized remains of different species found in sedimentary rocks can be used to infer the relative age of the rocks.

This principle is based on the idea that the fossil record is a record of the evolution of life on Earth. In addition, the principle of faunal succession also provides insight into the ancient environment and climate. For example, the presence of certain types of fossils, such as coral reefs or tropical plants, may indicate that the area was once a warm, shallow sea.

In all, the principle of faunal succession is a powerful tool that connects prehistoric life to the age of sedimentary rocks. By studying the fossilized remains of different species found in sedimentary rocks, scientists can infer the relative age of the rocks and the conditions that existed when they were formed.

Learn more about  sedimentary rocks from

https://brainly.com/question/7437433

#SPJ1

HF is a polar covalent bond. The difference in electronegativity between hydrogen and fluorine causes the electrons in the bond to be unevenly distributed, resulting in a partial positive charge on the hydrogen atom and a partial negative charge on the fluorine atom.

This creates a polar bond rather than a nonpolar covalent bond. In a nonpolar covalent bond, the electrons are shared equally between the two atoms, resulting in no net dipole (separation of charge).

However, in a polar covalent bond, the electrons are not shared equally, resulting in a net dipole. The difference in electronegativity between the atoms causes one atom to have a stronger attraction for the electrons than the other, resulting in a partial positive charge on one atom and a partial negative charge on the other.

In the case of the HF molecule, the fluorine atom has a much higher electronegativity than the hydrogen atom.

As a result, the electron cloud is pulled more towards the fluorine atom, leaving the hydrogen atom with a partial positive charge (+) and the fluorine atom with a partial negative charge (-). This creates a polar bond with a net dipole moment, meaning that the molecule has a positive and a negative pole.

It is also important to mention that the polar nature of a covalent bond can also be determined by the molecular geometry.

The bond dipole moment is determined by the vector difference of the charges and the distance between them, so the bond dipole moment is zero in a symmetrical molecule but not in an asymmetrical one.

Learn more about covalent bond:

https://brainly.com/question/9833711

#SPJ4

Charles Law states that volume increases with temperature.

Charles law state that the volume given mass of gas varies directly with the absolute temperature of the gas when pressure is kept constant. The absolute temperature is measures with the kelvin scale.

The volume of a gas having fixed mass tends to decrease when cooled and increases when the temperature is increased. The volume of gas tends to get increased by 1/273 of its actual volume at 0° C.

The law also states that the kelvin temperature and the volume will be in direct proportion when the pressure exerted on a sample of dry gas is held constant.

Learn more about Charles law,

https://brainly.com/question/30321367

If  the vapor pressure of pure methanol at 50 °c is 400 torr. The change in vapor pressure of a solution made from 23.5 g of glycerin in 130 g of methanol at 50 °C  is 24 torr.

The vapor pressure is given as :

p = x1 p°1

The lowering in vapor pressure :

Δp = p°1 - p1

     = p°1 - x1p°1

    = p°1 ( 1 - x1)

Δp = x2 p°1

Moles of glycerin = 23.5 / 92

                              = 0.255 mol

Moles of methanol = 130 / 32

                                = 4 mol

Total moles = 0.25 + 4

                    = 4.25 mol

Mole fraction , x2 = 0.255 / 4.25

                             = 0.06

Δp = x2 p°1

     = 0.06 × 400 torr

     = 24 torr

To learn more about vapor pressure here

https://brainly.com/question/14897199

#SPJ4

Synthetic materials are material that can be made by chemical process instead of being extracted from a natural resource.

Define chemical process.

An effective way to modify one or more chemicals or chemical compounds is through a chemical process. Such a chemical process involves a chemical reaction of some kind and can happen naturally or be triggered by an external factor.

A synthetic material is one in which the components are purposefully combined to create a substance with various properties. While most synthetic materials are the consequence of chemical processes, some are created from combinations. Synthetic fibers, ceramics, polymers, artificial foods, artificial pharmaceuticals, and composites are a few examples of synthetic materials. Flexible synthetic fibers are available. They can be utilized to create apparel and other items. The synthetic fibers nylon, polyester, and rayon are some examples.

To learn more about chemical reaction use link below:

https://brainly.com/question/11231920

#SPJ4

2.0 moles of H2O contain 2.0 x Avogadro's number of molecules, which is 6.022 x 10^23 molecules.

This is because represents the number of atoms or molecules in one mole of a substance. In one mole of any substance 6.022 × 10²³ particles of that substances are present, which is also known as Avogadro's number. So, in 2 moles of H₂O = 2(6.022 × 10²³) = 12.044 × 10²³ molecules will present. Therefore, multiplying Avogadro's number by the number of moles of a substance gives the number of atoms or molecules present in that substance. In this case, 2.0 moles of H2O contain 2.0 x 6.022 x 10^23 = 1.204 x 10^24 molecules.

To learn more about molecules:

https://brainly.com/question/26044300

#SPJ4

The Balanced Chemical Equation is: Na2SO3(aq)+2HCl(aq)→H2SO3(aq)+2NaCl(aq)

What is an Equivalent point?

In an acid-base reaction, the equivalence point is when chemically equal amounts of acid and base are mixed. This is a general reaction pathway that produces a specific acid/base or salt from a mixture of other acids and bases.

This is a mixed acid-base reaction up to the equivalence point.

Aqueous Sulfurous Acid: H2SO3(aq)

Aqueous Hydrochloric Acid: NaCl(aq)

Aqueous Sodium Sulfite: Na2SO3(aq)

Aqueous Hydrochloric Acid: HCl(aq)

Therefore, the balanced formula is:

Na2SO3(aq)+2HCl(aq)→H2SO3(aq)+2NaCl(aq)

To learn more about the Equivalent point, click on the given link: https://brainly.com/question/2496608

#SPJ4

The primary fate of the hydrogen atoms in the oxidation of glucose is reaching oxidation state I in water after going from oxidation state 0 in H2.

In essence, glycolysis splits a 6-carbon glucose molecule into two 3-carbon pyruvate molecules. NAD+ is involved in the process and captures hydrogen atoms and electrons. Any energy released will either be retained as ATP or NADH, or it will be expelled as heat.

When glucose and molecule of oxygen interact, carbon dioxide and water are created. Glucose's carbon atoms undergo oxidation. In other words, they lose an electron and go to a more oxidized state. In molecular oxygen, the oxygen atoms undergo reduction.

To know more about oxidation visit :

https://brainly.com/question/16976470

#SPJ4

Answer:

A. seeds, sperm and eggs cells, or DNA

Explanation:

Germplasm are living genetic resources such as seeds or tissues that are maintained for the purpose of animal and plant breeding, preservation, and other research uses.

The cycle of citric acid Hydrogen atoms are transported to FAD during the conversion of succinate to fumarate. This process is catalyzed by a succinate dehydrogenase enzyme.

During the process of succinate dehydrogenation, succinate is oxidized to fumarate by losing electrons, which are transferred to FAD, reducing it to FADH2. This transfer of electrons from succinate to FAD is an oxidation-reduction reaction, also known as redox reaction. The energy released during this reaction is harnessed to generate ATP, which is an important energy currency for the cell. Succinate dehydrogenase is an enzyme complex that contains multiple subunits and cofactors, including flavin adenine dinucleotide (FAD) and iron-sulfur clusters. It is located in the inner mitochondrial membrane, which allows it to transfer electrons to the electron transport chain, leading to the production of ATP. It's important to note that the citric acid cycle is a crucial metabolic pathway that takes place in the mitochondria of eukaryotic cells, and it is also known as the TCA cycle or Krebs cycle. The cycle is a series of chemical reactions that converts acetyl-CoA, derived from carbohydrates, fats, and proteins, into carbon dioxide and water, releasing energy in the form of ATP, hydrogen atoms other high-energy molecules.

To know more about hydrogen atoms please refer: https://brainly.com/question/29130026

#SPJ4

It is not possible to conclude that light carries energy by comparing the temperature of the two thermometers.

To learn more about temperature refer:

brainly.com/question/2339046

#SPJ1

Answer:

Remove/Add an electrons

Explanation:

Some chemicals find full octets more stable and strive to become one, so when you remove lone pairs you made the stucture more stable for instance. Or perhaps you add another element, for instance OH is stable but H₂O is VERY stable.

Explanation:

The maximum amount of water you can put in the metal box is 30996 cm^3 before it freeze and overflow

Answer:

  0.0135 moles

Explanation:

You want to know the number of moles of gas in a 0.325 L container at 1.00 atm and 293 K.

The ideal gas law is ...

  PV = nRT

Solving for n, the number of moles can be found as ...

  n = PV/(RT)

  n = (101.325 kPa)(0.325 L)/(8.3145 L·kPa/(K·mol)·293 K) ≈ 0.0135 mol

The container can hold 0.0135 moles of gas.

__

Additional comment

1.00 atm = 101.325 kPa

The number of moles of each reactant involved in the reaction are as follows: 1 mole of lead (II) nitrate and 2 moles of potassium iodide (option C).

A chemical reaction is a process, typically involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

According to this question, lead (II) nitrate and potassium iodide combine to form potassium nitrate and lead iodide as follows:

Pb(NO₃)₂ + 2KI → PbI₂ + 2KNO₃

It can be observe that 1 mole of lead nitrate and 2 moles of pottasium iodide reacted.

Learn more about chemical reaction at: https://brainly.com/question/3461108

#SPJ1

The number of moles of each reactant involved in the reaction is shown below:

1 mole of lead (II) nitrate and 2 moles of potassium iodide

(option C). is correct

A chemical reaction is described as a process that leads to the chemical transformation of one set of chemical substances to another.

From the queation, we can deduce that lead (II) nitrate and potassium iodide combine to form potassium nitrate and lead iodide as follows:

Pb(NO₃)₂ + 2KI → PbI₂ + 2KNO₃

Therefore, 1 mole of lead nitrate and 2 moles of potassium iodide reacted to form 2KNO₃.

Learn more about chemical reaction at: https://brainly.com/question/11231920

#SPJ1