Let f(x)=−3x 2
+4x use definition of the Derivative lim h→0
​
h
f(a+h)−f(2)
​
to compute f ′
(x) Fins the tangent line to the graph f(x)=−3x 2
+4x 2+x=2

The length of the ladder is given as follows:

l = 88.9 ft.

The three trigonometric ratios are the sine, the cosine and the tangent of an angle, and they are obtained according to the formulas presented as follows:

For the angle of 77º, we have that:

Hence the length of ladder is obtained as follows:

cos(77º) = 20/l

l = 20/cosine of 77 degrees

l = 88.9 ft.

A similar problem, also about trigonometric ratios, is given at brainly.com/question/24349828

#SPJ1

The value of the given integral is  4√(3)/3 .

To evaluate the integral, we can use iterated integration.

Let's start with the inner integral,

∫ x² dy                           Having limit √(1 - x²) to 0

We can integrate this using the fundamental theorem of calculus,

∫ x² dy                           Having limit √(1 - x²) to 0

= yx²                              Having limit √(1 - x²) to 0

= -x²√(1 - x²)

Now, substitute this back into the original integral:

⇒ ∫-x²√(1 - x²)dx            Having limit  -1 to 1

We can use integration by parts to solve this integral,

Let u = -x² and dv = √(1 - x²) dx

Then du/dx = -2x and v = (1/2)(x√(1 - x²)+ asin(x))

Using the integration by parts formula, we get:

⇒ ∫ of -x²√(1 - x²)dx              having limit -1 to 1

⇒ (-x²) (1/2) (x√(1 - x²) + asin(x)) | limit from -1 to 1 - ∫ limit from - 1 to 1 of (1/2) (x√(1 - x²) + asin(x)) (-2x) dx

Simplifying, we get,

= (-1/2) (0 + asin(1) - (0 + asin(-1))) + 2 ∫ from -1 to 1 of x²√(1 - x²) dx

The first term is zero, and the second term is the integral we previously solved.

So, we have,

= 2 (-x²√(1 - x²))  limit from -1 to 1

= 4√(3)/3

Therefore, the value of the integral is 4√(3)/3

To learn more about integration visit:

https://brainly.com/question/31744185

#SPJ4

1. Finding the critical points and intervals of increasing/decreasingFor the function f(x)=(x-1)e, let's first find the critical points.f′(x)=(x-1)eThus, f′(x)=0 when (x-1)e=0i.e., x=1

This is the only critical point. Now, let's determine the intervals of increasing and decreasing using the first derivative test:

Critical point f′(x)Intervals of increaseIntervals of decreasex < 1f′(x) < 0f(x) decreasingx > 1f′(x) > 0f(x) increasing

Thus, the function is increasing on the interval (1,∞) and decreasing on the interval (−∞,1).

2.Finding the critical points and intervals of increasing/decreasingFor the function f(x)= xin x, let's first find the critical points.f′(x)=x(1/ x)ln(x)+x(d/dx (ln(x)))f′(x)=ln(x)+1

We need to solve the equation f′(x)=ln(x)+1=0ln(x)=-1x=e−1 This is the only critical point.

Now, let's determine the intervals of increasing and decreasing using the first derivative test:

Critical point f′(x)Intervals of increaseIntervals of decreasex < e−1f′(x) < 0f(x) decreasingx > e−1f′(x) > 0f(x) increasing

Thus, the function is increasing on the interval (e−1,∞) and decreasing on the interval (0,e−1).

The function f(x)=xin x does not have a local minimum or maximum point because it does not satisfy the conditions of the second derivative test.

To know more about critical visit:

brainly.com/question/32659270

#SPJ11

In an isothermal and isobaric plug flow reactor (PBR) with a catalyst mass of 500 kg, a gas phase reaction A → B + C is carried out. With a feed rate of 100 mol/s of A and an initial concentration of 1 mol/dm³, the goal is to determine the achieved conversion. The reaction rate constant is given as k = 0.1111 dm³/kg-s.

The conversion of a reactant in a chemical reaction refers to the fraction of the initial moles of the reactant that have been transformed into products. In this case, we need to determine the conversion of A.

The conversion (X) can be calculated using the equation X = (n₀ - n) / n₀, where n₀ is the initial moles of A and n is the moles of A at any given point in the reactor.

To find the moles of A at a certain point, we need to consider the reaction rate equation. Since the reaction is gas-phase, we can use the ideal gas law to relate concentration and moles. The rate of reaction is given by the equation r = k * C_A, where r is the rate of reaction, k is the rate constant, and C_A is the concentration of A.

Since the reactor is isothermal and isobaric, the concentration of A will decrease linearly along the reactor length. Integrating the rate equation, we can obtain the expression for n as a function of reactor length (L).

By substituting the given values (initial concentration, rate constant, feed rate), we can solve for the conversion X. This will provide the fraction of A that has been converted to products under the given conditions.

Using the provided information and applying the relevant equations, the achieved conversion of A can be calculated for the given gas phase reaction in the isothermal and isobaric PBR.

Learn more about rate here:

https://brainly.com/question/199664

#SPJ11

The given complex number is [tex]2+2√√/31[/tex]. Let us find the polar form of the given complex number with argument 0 between 0 and 2π.

Let us consider the rectangular form of the given complex number [tex]z = 2+2√√/31.[/tex]

Here, the real part is 2 and the imaginary part is [tex]2√√/31.[/tex]

Let us find the magnitude of the complex number, which is given by [tex]|z| = √(2^2+ (2√√/31)^2)[/tex]

On simplifying, we get[tex]|z| = √(4 + 8/√31) |z| = √((4*√31+8)/√31) |z| = √(4(√31+2)/√31) |z| = 2√(√31+2)/√31[/tex]

Let us find the argument of the given complex number.

Here, the real part is positive and the imaginary part is positive.

Hence, the argument lies in the first quadrant.

Using the formula for argument, we have [tex]θ = tan⁻¹ (2√√/31/2) θ = tan⁻¹ (√√/31)[/tex]

Therefore, the polar form of the given complex number is [tex]2√(√31+2)/√31 cis (tan⁻¹ (√√/31)),[/tex]

where cis represents cos + i sin.

To know more about polar visit:

https://brainly.com/question/1946554

#SPJ11

The induced norm of a linear transformation is the maximum value that the transformation applies to a vector. The induced norm of a matrix A is given by ||A|| = sup{|Ax|: ||x|| ≤ 1}.

Here, we need to find out the values of C for which the matrix of a linear mapping has the induced norm equal to 3.The matrix is given as:

A = [C -1 0; 1 0 C; 1 C -1].

The Euclidean norm of this matrix is:  ||A|| = sup{|Ax|: ||x|| ≤ 1}= sup{|[Cx-y0, -x1 + Cx2, x1 - Cx2]|: (x1)² + (x2)² + (x3)² ≤ 1}

Now, we can apply triangle inequality and simplify the above expression as:

||A|| = sup{|C| |x1| + |x2 - y0| + |-x1 + Cx2|}  ≤  sup{(√(C²+1)) |x1| + |x2 - y0| + (√(C²+1))|x2|}  ≤  sup{(√(C²+1)) |x1| + |x2 - y0| + (√(C²+1))|x2| + (√(C²+1))|x3|}

We can set the above expression to 3 and solve for

C:(√(C²+1)) + (√(C²+1)) + (√(C²+1)) = 3⇒ √(C²+1) = 1⇒ C²+1 = 1⇒ C = 0

We can substitute C=0 in the original matrix to verify that the induced norm of A is indeed equal to 3 when

C=0.A = [0 -1 0; 1 0 0; 1 0 -1]||A|| = sup{|[0x1 - x2, -x1, 0x1 + x2]|: (x1)² + (x2)² + (x3)² ≤ 1} = 3

Therefore, the value of C for which the matrix of a linear mapping has the induced norm equal to 3 is 0.

To know more about Euclidean norm visit :
https://brainly.com/question/15018847

#SPJ11

1) f(x) is a probability density function.

2) The probability that X is greater than 5 is , 0.9798.

3) P(4 < X < 12) = 0.6591 - 0.1103 = 0.5488

4) The value of c such that P(X > c) = 0.3 is , 12.2083.

Now, for f(x) is a probability density, we need to verify that it satisfies two properties: non-negativity and normalization.

Non-negativity:

Since the function is defined as,

f(x) = (1/√(2π)) [tex]e^{-x^{2} /2}[/tex]

we can see that it is always positive, since the exponential term is positive and the denominator is a positive constant. Therefore, f(x) is non-negative for all x in R.

Normalization: We need to show that the integral of f(x) over the entire real line is equal to 1:

Limit from - ∞ to ∞ ∫ f(x) dx = Limit from - ∞ to ∞ ∫ (1/√(2π) [tex]e^{-x^{2} /2}[/tex]dx = 1

This integral cannot be evaluated analytically, but we know that the standard normal distribution has a mean of zero and a variance of one, which means that its probability density function integrates to 1 over the entire real line.

The function f(x) is a scaled version of the standard normal density function, so it too must integrate to 1 over the entire real line.

Therefore, f(x) is a probability density function.

(a) To compute P(X > 5), we need to standardize X by subtracting the mean and dividing by the standard deviation:

Z = (X - μ) / σ = (X - 10) / √24

Then, we can use the standard normal distribution table (or a calculator or software) to find the probability:

P(X > 5) = P(Z > (5 - 10) / √24)

= P(Z > -2.041)

= 0.9798

Therefore, the probability that X is greater than 5 is approximately 0.9798.

(b) To compute P(4 < X < 12), we can standardize X and use the properties of the standard normal distribution:

P(4 < X < 12) = P((4 - 10) / √24 < Z < (12 - 10) / √24)

P( -1.2247 < Z < 0.4082) = P(Z < 0.4082) - P(Z < -1.2247)

Using a standard normal distribution table or software, we can find:

P(Z < 0.4082) = 0.6591

P(Z < -1.2247) = 0.1103

Therefore, P(4 < X < 12) = 0.6591 - 0.1103 = 0.5488 (approximately)

The value of c such that P(X > c) = 0.3 can be found by standardizing X and using the inverse standard normal distribution function:

P(X > c) = 0.3

P(Z > (c - 10) / √24) = 0.3

Using a standard normal distribution table or software, we can find the value of z such that P(Z > z) = 0.3:

z ≈ 0.5244

Then, we can solve for c:

(c - 10) / √24 = 0.5244

c - 10 = 0.5244 * √24

c ≈ 12.2083

Therefore, the value of c such that P(X > c) = 0.3 is approximately 12.2083.

Learn more about the probability visit:

https://brainly.com/question/13604758

#SPJ4

For the function f(x) = 3.1;

Determine the following limits limx→-2-

f(x)limx→-2+f(x)

Show that limx→-2f(x) exist. (x−1x²−4x+6 if x>-2if x<-2.)

Step 1: Determine f(x)The function f(x) is given by:x-1 if x > -2, and x²-4x+6 if x < -2.

Step 2: Determining limx→-2-f(x)Let us calculate limx→-2-f(x).

When we approach -2 from the left side, f(x) will be equal to x²-4x+6.

Now, let us evaluate the limit using substitution:

limx→-2-f(x) = limx→-2(x²-4x+6)limx→-2-(x-2)²+2=x-4x-2 = 12

Thus, limx→-2-f(x) = 12.

Step 3: Determining limx→-2+f(x)Let us calculate limx→-2+f(x).

When we approach -2 from the right side, f(x) will be equal to x-1.

Now, let us evaluate the limit using substitution:

limx→-2+f(x) = limx→-2(x-1)limx→-2+(x+2) = -1

Thus, limx→-2+f(x) = -1.

Step 4: Show that limx→-2 f(x) exist

For the function f(x) to have a limit at x = -2, both the left-hand and right-hand limits must be equal.

However, we have shown that limx→-2-f(x) = 12 and limx→-2+f(x) = -1.

Since the left-hand limit and the right-hand limit are not equal,

we can conclude that limx→-2 f(x) does not exist.

To know more about Determine visit :

https://brainly.com/question/30339780

#SPJ11

Answer:

look at attachment

Step-by-step explanation:

We are given that T(x) = 2 + 0.3 and we are supposed to find the total time required for a worker to produce units 20 through 30. the time required to produce the 20th unit as:

T(20) = 2 + 0.3 × 20 = 8 hours The time required to produce the 30th unit as:

 T(30) = 2 + 0.3 × 30 = 11 hours The time required to produce the 21st unit to 29th unit is: T(21) + T(22) + ... + T(29)We know that T  (x) = 2 + 0.3x

So, substituting the values, we get: T(21) + T(22) + ... + T(29) =

(2 + 0.3 × 21) + (2 + 0.3 × 22) + ... + (2 + 0.3 × 29)= 29.7 hours

So, the total time required to produce units 20 through 30 is:8 + 11 + 29.7 = 48.7 hours .

To know more about units,visit:

https://brainly.com/question/23843246

#SPJ11

The solution to the given differential equation x³y' - (8x² - 5)y = 0 using separation of variables is y = C * x^8 * e^(5/x²), where C is a constant.

To solve the given differential equation x³y' - (8x² - 5)y = 0, we'll use the method of separation of variables.

A) Solve the differential equation by separation of variables:

Rearranging the equation, we have:

x³y' = (8x² - 5)y

Now, we'll separate the variables by dividing both sides of the equation:

y' / y = (8x² - 5) / x³

Integrating both sides with respect to x, we get:

∫(y' / y) dx = ∫((8x² - 5) / x³) dx

Integrating the left side gives us:

ln|y| = ∫((8x² - 5) / x³) dx

Next, we'll evaluate the integral on the right side:

ln|y| = ∫(8/x - 5/x³) dx

= 8∫(1/x) dx - 5∫(1/x³) dx

= 8ln|x| + (5/2)(1/x²) + C

Combining the terms, we have:

ln|y| = 8ln|x| + (5/2)(1/x²) + C

Using the properties of logarithms, we can simplify further:

ln|y| = ln|x^8| + (5/2)(1/x²) + C

= ln|x^8| + 5/x² + C

Applying the exponential function to both sides, we have:

|y| = e^(ln|x^8| + 5/x² + C)

= e^(ln|x^8|) * e^(5/x²) * e^C

Simplifying, we obtain:

|y| = |x^8| * e^(5/x²) * e^C

= C * |x^8| * e^(5/x²)

We can rewrite this as:

y = ± C * x^8 * e^(5/x²)

So, the general solution to the differential equation is:

y = C * x^8 * e^(5/x²), where C is a constant.

B) Find a solution that satisfies the initial condition y(1) = 2:

Substituting x = 1 and y = 2 into the general solution, we get:

2 = C * 1^8 * e^(5/1²)

2 = C * e^5

Solving for C, we find:

C = 2 / e^5

Therefore, the particular solution that satisfies the initial condition is:

y = (2 / e^5) * x^8 * e^(5/x²).

Learn more about differential equation here:

https://brainly.com/question/32645495

#SPJ11

Let P(t) be the population of a country, in millions, t years after 1990, with P(7) = 3.25 and P(13) = 3.65.

Then, the formula for P(t) is given by:

P(t) = P(7) + (t - 7) (P(13) - P(7)) / (13 - 7)

Now, substituting the given values of P(7) and P(13), we get:

P(t) = 3.25 + (t - 7) (3.65 - 3.25) / (13 - 7)

P(t) = 3.25 + (t - 7) (0.4) / (6)

P(t) = 3.25 + 0.067 (t - 7)

Thus, the formula for P(t) assuming that it is near P(t) = 3.25 is:

P(t) = 3.25 + 0.067 (t - 7)

Now, to find the formula for P(t), we need to solve the equation of P(t) for all values of t.

So, we can use the formula obtained above to calculate the population at different times t after 1990.

For example, we can calculate P(10) as follows:

P(10) = 3.25 + 0.067 (10 - 7)

P(10) = 3.25 + 0.201

P(10) = 3.451

Thus, the formula for P(t) is:

P(t) = 3.25 + 0.067 (t - 7) and we can use this formula to calculate the population at any time t after 1990.

To know more about population visit :

https://brainly.com/question/15889243

#SPJ11

The size of the bacterial population after 5 hours is approximately 52065.

To find the initial population at time t = 0, we can use the doubling period information.

The doubling period is the time it takes for the population to double in size. In this case, the doubling period is 1515 minutes. This means that after every 1515 minutes, the population doubles.

At time t = 80 minutes, the population was 90000. This means that between t = 0 and t = 80 minutes, the population doubled. So, the population at time t = 0 was half of 90000.

Initial population at t = 0 = 90000 / 2 = 45000.

Therefore, the initial population at time t = 0 was 45000.

Now, let's find the size of the bacterial population after 5 hours.

There are 60 minutes in an hour, so 5 hours is equal to 5 * 60 = 300 minutes.

Since the doubling period is 1515 minutes, we need to determine how many times the population doubles within 300 minutes.

Number of doubling periods = 300 / 1515 = 0.198.

This means that the population approximately doubles 0.198 times within 300 minutes.

To calculate the size of the bacterial population after 5 hours, we multiply the initial population by 2 raised to the power of the number of doubling periods:

Population after 5 hours = Initial population * (2 ^ number of doubling periods)

Population after 5 hours = 45000 * (2 ^ 0.198)

Population after 5 hours ≈ 45000 * 1.157

Population after 5 hours ≈ 52065.

Therefore, the size of the bacterial population after 5 hours is approximately 52065.

Learn more about population here:

https://brainly.com/question/31598322

#SPJ11

To determine how the planes in each pair intersect, we need to analyze the coefficients of the variables in the plane equations. Specifically, we'll look at the coefficients of x, y, and z.

a) 2�+2�−4�+4=0

2x+2y−4z+4=0

b) 2�−�+�−1=0

2x−y+z−1=0

For planes a and b:

The coefficient of x is 2 in both planes.

The coefficient of y is 2 in plane a and -1 in plane b.

The coefficient of z is -4 in plane a and 1 in plane b.

Based on these coefficients, we can make the following observations:

If the coefficient ratios of x, y, and z in the two planes are proportional (i.e., the ratios are the same), the planes are parallel.

If the coefficient ratios of x, y, and z in the two planes are not proportional, the planes intersect at a single point, forming a unique solution.

If the coefficient ratios of x, y, and z are proportional but not identical (i.e., the ratios are the same, but one or more ratios have opposite signs), the planes are coincident (they overlap) or parallel.

Now let's apply this analysis to the given planes:

a) 2�+2�−4�+4=0

2x+2y−4z+4=0

b) 2�−�+�−1=0

2x−y+z−1=0

The coefficient ratios are as follows:

For x: 2/2 = 1

For y: 2/(-1) = -2

For z: -4/1 = -4

Since the coefficient ratios are not proportional, the planes are not parallel. Therefore, the planes a and b intersect at a single point, forming a unique solution.

Now let's move on to the next pair of planes:

c) 2�−6�+4�−7=0

2x−6y+4z−7=0

�+�−2�+2=0

x+y−2z+2=0

The coefficient ratios are as follows:

For x: 2/1 = 2

For y: -6/1 = -6

For z: 4/(-2) = -2

Since the coefficient ratios are not proportional, the planes are not parallel. Therefore, the planes c and d intersect at a single point, forming a unique solution.

Lastly, let's consider the remaining pair of planes:

�+�+�−6=0

x+y+z−6=0

3�−9�+6�−2=0

3x−9y+6z−2=0

The coefficient ratios are as follows:

For x: 1/3 = 1/3

For y: 1/(-9) = -1/9

For z: 1/6 = 1/6

Since the coefficient ratios are proportional but not identical, the planes are either coincident or parallel. To determine whether they are coincident or parallel, we would need to compare additional coefficients or the constant terms in the equations.

Based on the analysis of the coefficient ratios, the planes in pairs (a, b) and (c, d) intersect at a single point, forming a unique solution. The planes in the pair (e, f) are either coincident or parallel, but further analysis would be needed to determine the exact nature of their intersection.

To know more about coefficient , visit :

https://brainly.com/question/1594145

#SPJ11

A′(t) = 18t + 2, which is obtained by differentiating 9t² + 2t with respect to time t.

Given that the length of a rectangle is given by 9t+2 and its height is t, where t is time in seconds and the dimensions are in centimeters.

We are to find the rate of change of the area with respect to time.

To find the rate of change of the area with respect to time, we know that the formula for area(A) of a rectangle is given by; A = l × h

From the information given;

l = 9t + 2h = t

Let's substitute the value of l and h in the formula for area(A)

[tex]A = (9t + 2) \times t\\A = 9t^2 + 2t[/tex]

Now we can find the rate of change of the area with respect to time, A′(t) by differentiating the expression for area(A) with respect to time(t).

A′(t) = dA/dt

A′(t) = d/dt (9t² + 2t)

A′(t) = 18t + 2

The rate of change of the area with respect to time is given by A′(t) = 18t + 2

Answer: A′(t) = 18t + 2, which is obtained by differentiating 9t² + 2t with respect to time t.

To know more about area, visit:

https://brainly.com/question/1631786

#SPJ11

The differential dr can be expressed as dr = (-2sin(t)dt)i + (2cos(t)dt)j.

The resulting expression will depend on the specific values of a, b, and R.

(a) To evaluate the line integral ∫C​(5(x^2−y)i+6(y^2+x)j​)⋅dr over the circle C: (x−5)^2+(y−3)^2=4, oriented counterclockwise, we can parameterize the circle using polar coordinates. Let x = 5 + 2cos(t) and y = 3 + 2sin(t), where t ranges from 0 to 2π.

The differential dr can be expressed as dr = (-2sin(t)dt)i + (2cos(t)dt)j.

Substituting the parameterizations and dr into the given vector field, we have:

(5(2cos(t))^2 - (3 + 2sin(t))) (-2sin(t)dt) + (6((3 + 2sin(t))^2 + (5 + 2cos(t)))) (2cos(t)dt)

Simplifying and integrating with respect to t from 0 to 2π, we get:

∫C​(5(x^2−y)i+6(y^2+x)j​)⋅dr = ∫[0,2π] ((20cos^2(t) - (3 + 2sin(t))) (-2sin(t)) + (6((3 + 2sin(t))^2 + (5 + 2cos(t)))) (2cos(t))) dt.

(b) To evaluate the line integral ∫C​(5(x^2−y)i+6(y^2+x)j​)⋅dr over the circle C: (x−a)^2+(y−b)^2=R^2 in the xy-plane, we can parameterize the circle using polar coordinates. Let x = a + Rcos(t) and y = b + Rsin(t), where t ranges from 0 to 2π.

Following a similar process as in part (a), we substitute the parameterizations and dr into the given vector field, simplify the expression, and integrate with respect to t from 0 to 2π to evaluate the line integral. The resulting expression will depend on the specific values of a, b, and R.

To know more about integration, visit:

https://brainly.com/question/31975699

#SPJ11

The value of x into Equation 4,

Let's solve the two problems step by step:

Problem 1: Find the three numbers.

Let's denote the first number as x, the second number as y, and the third number as z.

From the given information, we have the following equations:

x + y + z = 15 (Equation 1)

2x + 4y + 5z = 63 (Equation 2)

3x - y = 0 (Equation 3)

We can solve this system of equations to find the values of x, y, and z.

From Equation 3, we have y = 3x. Substituting this into Equation 1, we get:

x + 3x + z = 15

4x + z = 15 (Equation 4)

Now we have two equations with two variables (Equations 2 and 4). Let's solve them simultaneously.

Multiplying Equation 4 by 2, we have:

8x + 2z = 30 (Equation 5)

Subtracting Equation 2 from Equation 5, we get:

8x + 2z - (2x + 4y + 5z) = 30 - 63

6x - 3z = -33

2x - z = -11 (Equation 6)

Now we have two equations:

2x - z = -11 (Equation 6)

4x + z = 15 (Equation 4)

Adding Equation 6 and Equation 4, we eliminate z:

(2x + 4x) + (-z + z) = -11 + 15

6x = 4

x = 4/6 = 2/3

Substituting the value of x into Equation 4,

Learn more about  equation from

https://brainly.com/question/29174899

#SPJ11

The value of P[X>3.4] is 0.4917, where x is a continuous random variable .

Given [tex]f\left(x\right)=\frac{kx}{\left(10+x^2\right)^2}[/tex]

Let us solve the value of k:

[tex]\int _0^{\infty }\:f\left(x\right)dx=1[/tex]

[tex]\int _0^{\infty }\frac{kx}{\left(10+x^2\right)^2}dx=1[/tex]

Let u=10+x²

du=2xdx

x=u-10

When x=0, u=10, and when x = ∞, u=∞.

Substituting these limits, the integral becomes:

[tex]\int _{10}^{\infty }\frac{k\sqrt{u-10}}{u^2}du=1[/tex]

Now, we can integrate this expression to solve for  K.

[tex]f\left(x\right)=\frac{2kx}{\left(10+x^2\right)^2}[/tex]

Now, we can proceed with the integration:

[tex]\int _{10}^{\infty }\frac{2k\sqrt{u-10}}{u^2}du=1[/tex]

We calculate the indefinite integral:

[tex]\int \:\frac{2k\sqrt{u-10}}{u^2}du=-\frac{2k}{3u^{\frac{3}{2}}}+c[/tex]

Evaluating the definite integral, we have:

[tex]\left[-\frac{2k}{3u^{\frac{3}{2}}}\right]^{\infty }_{10}=1[/tex]

[tex]-\frac{2k}{3\infty ^{\frac{3}{2}}}+\frac{2k}{3.10\:^{\frac{3}{2}}}=1[/tex]

As ∞ / ∞ is an indeterminate form, we take the limit as u approaches ∞:

[tex]\lim _{u\to \infty }\left(\frac{-2k}{3u}\right)+\frac{2k}{300}=1[/tex]

The first term approaches zero, so we are left with:

2k/300=1

k=150

Now P(x>3.4)=[tex]\int _0^{\infty }\frac{150x}{\left(10+x^2\right)^2}dx[/tex]

Let u=10+x²

du=2xdx

x=u-10

When x=3.4, u=21.16, and when x = ∞, u=∞.

[tex]\int _{21.16}^{\infty \:}\frac{150\sqrt{u-10}}{u^2}du[/tex]

[tex]\left[-\frac{150}{3u^{\frac{3}{2}}}\right]^{\infty }_{_{21.16}}[/tex]

Calculating this expression, we find:

P(x>3.4)=0.4917

To learn more on Integrals click:

https://brainly.com/question/31109342

#SPJ4

a. The values of H(2), H(6), H(3), and H(5) are 192, 192, 240, and 240, respectively. Some outputs are equal because the ball reaches the same height at symmetric time intervals due to the parabolic path.

b. The ball reaches its highest point at t = 4 seconds with a height of 256 feet, as determined from the graph of the function.

c. The ball takes 8 seconds to hit the ground.

d. The domain of H is all real numbers.

e. The range of H is [0, 256].

a. To find the values of H(2), H(6), H(3), and H(5), we substitute the given values of t into the function H(t) = 128t - 16t².

H(2) = 128(2) - 16(2)² = 256 - 64 = 192

H(6) = 128(6) - 16(6)² = 768 - 576 = 192

H(3) = 128(3) - 16(3)² = 384 - 144 = 240

H(5) = 128(5) - 16(5)² = 640 - 400 = 240

We can observe that H(2) = H(6) and H(3) = H(5). This is because at these points in time, the ball reaches the same height due to the symmetry of the parabolic path.

b. To graph the function, we plot the points (t, H(t)) using different values of t. From the graph, we can determine the highest point by identifying the vertex of the parabola. The vertex occurs at t = -b/2a, where a = -16 and b = 128.

t = -b/2a = -128/(2(-16)) = -128/-32 = 4

The ball is at its highest point at t = 4 seconds. To find its height at that instant, we substitute t = 4 into the function:

H(4) = 128(4) - 16(4)² = 512 - 256 = 256

Therefore, at its highest point, the ball is at a height of 256 feet.

c. To find how long it takes for the ball to hit the ground, we set H(t) = 0 and solve for t:

128t - 16t² = 0

16t(8 - t) = 0

This equation has two solutions: t = 0 and t = 8. However, since we are considering the time the ball is shot out of the cannon, the relevant solution is t = 8 seconds. So, it takes 8 seconds for the ball to hit the ground.

d. The domain of H is the set of all real numbers since there are no restrictions on the time t.

e. The range of H depends on the values of t. Since the coefficient of the quadratic term in H(t) is negative, the parabola opens downward. The maximum height occurs at t = 4 seconds, where the height is 256 feet. Therefore, the range of H is [0, 256].

To know more about parabolic path, refer to the link below:

https://brainly.com/question/12909465#

#SPJ11

The rate of change of the Volume of the cone when the radius is 9 cm and the height is 12 cm is -69π cubic cm/sec.

To find the rate of change of the volume of the cone, we can use the formula for the volume of a cone:

V = (1/3) * π * r^2 * h,

where V is the volume, r is the radius, and h is the height of the cone.

Given that the radius is increasing at 2 cm/sec (dr/dt = 2) and the height is decreasing at 3 cm/sec (dh/dt = -3), we want to find the rate of change of the volume (dV/dt) when the radius is 9 cm (r = 9) and the height is 12 cm (h = 12).

To find dV/dt, we can differentiate the volume equation with respect to time (t):

dV/dt = (1/3) * π * (2r * dr/dt * h + r^2 * dh/dt).

Now we substitute the given values into the equation:

dV/dt = (1/3) * π * (2(9)(2)(12) + (9^2)(-3)).

Simplifying the expression:

dV/dt = (1/3) * π * (36 + 81(-3))

     = (1/3) * π * (36 - 243)

     = (1/3) * π * (-207)

     = -69π.

Therefore, the rate of change of the volume of the cone when the radius is 9 cm and the height is 12 cm is -69π cubic cm/sec.

For more questions on Volume .

https://brainly.com/question/27535498

#SPJ8

Here, X(t) represents the complementary solution obtained from the homogeneous equation, A(t) = AAt represents the solution obtained by multiplying A with the vector t, and (-A^(-1)f(t)) represents the particular solution obtained by multiplying the inverse of A with the vector f(t).

To find the general solution to the system of differential equations x'(t) = Ax(t) + f(t), where A is a given matrix and f(t) is a given vector, we can use the method of undetermined coefficients.

Let's assume the general solution has the form x(t) = X(t) + Y(t), where X(t) is the complementary solution to the homogeneous equation x'(t) = Ax(t) and Y(t) is a particular solution to the non-homogeneous equation x'(t) = Ax(t) + f(t).

First, let's find the complementary solution by solving the homogeneous equation x'(t) = Ax(t). This can be done by finding the eigenvalues and eigenvectors of the matrix A.

Next, let's find a particular solution Y(t) that satisfies the non-homogeneous equation x'(t) = Ax(t) + f(t). We assume Y(t) has the same form as f(t), but with undetermined coefficients. In this case, Y(t) = At + B, where A and B are vectors to be determined.

Substituting Y(t) into the non-homogeneous equation, we get:

Y'(t) = A + 0,  (since B is a constant vector)

A + 0 = A(A t + B) + f(t),

Equating the corresponding components, we have:

A = AA t + AB + f(t).

Comparing the coefficients, we get two equations:

A = AA,

0 = AB + f(t).

To solve these equations, we can use the inverse of A, denoted as A^(-1), if it exists. We can then express A and B as:

A = A^(-1)AA,

B = -A^(-1)f(t).

Finally, the general solution to the system of differential equations is:

x(t) = X(t) + Y(t),

    = X(t) + At + B,

    = X(t) + A(t) + (-A^(-1)f(t)).

To know more about equations visit:

brainly.com/question/29657983

#SPJ11

The area of the region enclosed by the graphs of the function y = x², y = x⁸, and y = 1 is 2/9 square units.

Let's start by drawing a diagram of the region enclosed by the curves y = x², y = x⁸, and y = 1 on the x-axis below:

We'll figure out the limits of integration by seeing where the curves intersect. The curves intersect at x = 0 and x = 1, so those will be our limits of integration. Thus, the area can be calculated using the formula:

∫(lower limit)(upper limit)[(top curve) - (bottom curve)] dx

∫01[(x⁸ - 1) - (x² - 1)] dx∫01(x⁸ - x²) dx

= [x⁹/9 - x³/3] from 0 to 1

= [(1/9) - (1/3)] - [0 - 0]

= -2/9, which is negative and hence incorrect.

Therefore, the correct answer is 2/9 square units. The method used in calculating the area using the integration along the x-axis was relatively easy. It's always important to check our work and verify the answer, which was done in this question using the integration along the y-axis.

To know more about the integration, visit:

brainly.com/question/31744185

#SPJ11

There are 533 numbers in the set {1, 2, ..., 1000} that are divisible by 3, 5, or 7.

The principle of inclusion/exclusion can be used to determine how many numbers from the set {1,2,...,1000} are divisible by 3, 5, or 7.

Principle of Inclusion/Exclusion: If a finite set S is the union of n sets, then the number of elements in S is:Firstly, we need to find the number of integers between 1 and 1000 that are divisible by 3, 5, or 7.

For this, we use the principle of inclusion/exclusion:Let A, B, and C denote the sets of integers from 1 to 1000 that are divisible by 3, 5, and 7, respectively.

Then,|A| = floor(1000/3) = 333,

|B| = floor(1000/5) = 200 ,

|C| = floor(1000/7) = 142 ,

|A ∩ B| = floor(1000/15) = 66 ,

|B ∩ C| = floor(1000/35) = 28 ,

|A ∩ C| = floor(1000/21) = 47 ,

|A ∩ B ∩ C| = floor(1000/105) = 9

Using the principle of inclusion/exclusion, we obtain the number of integers that are divisible by at least one of 3, 5, or 7 to be:N(A ∪ B ∪ C) = |A| + |B| + |C| - |A ∩ B| - |B ∩ C| - |A ∩ C| + |A ∩ B ∩ C|= 333 + 200 + 142 - 66 - 28 - 47 + 9= 533

Thus, there are 533 numbers in the set {1, 2, ..., 1000} that are divisible by 3, 5, or 7.

To know more about integers visit:

https://brainly.com/question/490943

#SPJ11

The limit as \(x\) approaches infinity of the given expression is \(-\infty\).

To find the limit as \(x\) approaches infinity of the given expression, we need to analyze the behavior of the numerator and denominator as \(x\) becomes very large.

In the numerator, we have \(-4x + 2\). As \(x\) approaches infinity, the dominant term in the numerator is \(-4x\). Since \(x\) is getting larger and larger, the term \(-4x\) becomes increasingly negative.

In the denominator, we have \(7x^2 + 4\). As \(x\) approaches infinity, the dominant term in the denominator is \(7x^2\). Since \(x\) is getting larger and larger, the term \(7x^2\) becomes much larger than 4.

Considering these observations, we can see that as \(x\) approaches infinity, the numerator \(-4x\) becomes increasingly negative and the denominator \(7x^2\) becomes increasingly larger. Therefore, the fraction as a whole approaches negative infinity.

Hence, the limit as \(x\) approaches infinity of the given expression is \(-\infty\).

Learn more about limit here

https://brainly.com/question/30679261

#SPJ11

To find the work needed to pump all the water to a level 1 ft above the rim of the tank, we can calculate the change in potential energy of the water. The volume of a cone is given by the formula V = (1/3)πr²h, where r is the radius and h is the height.

In this case, the initial height of the water in the tank is 1 ft, and the final height will be 4 ft (1 ft above the rim). The radius of the tank is 3 ft. The initial volume of the water is V1 = (1/3)π(3²)(1) = 3π ft³. The final volume of the water will be V2 = (1/3)π(3²)(4) = 12π ft³. The change in volume is ΔV = V2 - V1 = 12π - 3π = 9π ft³. Since the specific weight of seawater is γ, the weight of the water is W = γ * ΔV. Therefore, the work needed to pump all the water is given by the formula W = γ * ΔV * h, where h is the height.

Substituting the given values, we have W = γ * 9π * 1 = 9γπ ft-lb.

Learn more about The volume here: brainly.com/question/33613300

#SPJ11

(A U B)C has a cardinality of 4000 - (A U B).

There are 4700 students who didn't watch the movie either the first time or the second time. So, the number of students who watched the movie either the first time or the second time would be:(A U B) = A + B - (A ∩ B)

(A U B) = 850 + 690 - (A ∩ B)

A ∩ B = Students who watched the movie twice.

The number of students who watched the movie twice would be 850 + 690 - (A U B).

A ∩ B = 850 + 690 - (A U B)

A ∩ B= 1540 - (A U B)

The number of students who watched the movie either the first time or the second time would be:

(A U B) = 850 + 690 - (A ∩ B)

(A U B)= 850 + 690 - (1540 - (A U B))

(A U B)= 2000 + (A U B)

We can now calculate the number of students who didn't watch the movie either the first time or the second time by subtracting the number of students who watched the movie either the first time or the second time from the total number of students enrolled in the university during orientation week.

(A U B)C = Total number of students - (A U B)

(A U B)C= 6000 - (2000 + (A U B))

(A U B)C= 4000 - (A U B)

To know more about cardinality visit:

https://brainly.com/question/13437433

#SPJ11

Given f(x) = ax^n + bx^(n-1) + ... + ax + b where a0 > 0, b₁ > 0, and n is a natural number, find lim f(x) as x → -∞, x → 0, and x → +∞.

Limit of f(x) as x approaches -∞:If x → -∞, then f(x) → +∞.

Limit of f(x) as x approaches 0:

If x → 0, then f(x) → b.

Limit of f(x) as x approaches +∞:

If x → +∞, then f(x) → +∞.

The above discussion indicates that the limit of f(x) as x approaches 0 is b, and as x approaches -∞ and x approaches +∞, the limit of f(x) is +∞.

Hence, the required limit of f(x) islim

f(x) = +∞, as x → -∞, x → 0, and

x → +∞.

To know more about natural visit:

https://brainly.com/question/30406208

#SPJ11

Therefore, the time it will take to save $3019.00 by making deposits of $88.00 at the end of every month into an account earning interest at compounded monthly is 29 months or 2 years and 5 months (from 0 to 11 months).

apply the formula for the future value of an annuity, which is given as:

[tex]FV = (PMT * [((1 + r)^n - 1) / r]) * (1 + r)[/tex]

Where; PMT is the payment made at the end of each perio dr is the interest rate per period n is the total number of payment periods FV is the future value of the annuity Putting the given data into the formula,

[tex]3019 = (88 * [((1 + 0.09/12)^{(n)} - 1) / (0.09/12)]) * (1 + 0.09/12)[/tex]

n = (log(3019/(88*(0.09/12) + 1)) / log(1 + 0.09/12))

≈ 28.5 months or 28 months (rounded down) or 29 months (rounded up)

To learn more about compounded monthly

https://brainly.com/question/22504277

#SPJ11

The nominal rate compounded quarterly that was charged on a debt of $733.57, given that $887.75 was repaid, is 5.5242% per annum. To double the money in six years, six months when compounded semi-annually, the nominal annual rate of interest should be 3.5185% per annum.

To determine the nominal rate compounded quarterly, we can use the formula for compound interest:

A = P(1 + r/n)^(nt)

Where:

A = Final amount

P = Principal amount

r = Nominal interest rate

n = Number of times interest is compounded per year

t = Time in years

In this case, the principal amount (P) is $733.57, the repayment amount (A) is $887.75, and the time (t) is 45 months, which is equivalent to 45/12 = 3.75 years. We need to find the nominal interest rate (r) compounded quarterly, so n = 4.

We can rearrange the formula to solve for r:

r = ( (A/P)^(1/(n*t)) - 1 ) * n

Substituting the given values:

r = ( (887.75/733.57)^(1/(4*3.75)) - 1 ) * 4

r ≈ 0.013781 * 4

r ≈ 0.055124

Therefore, the nominal rate compounded quarterly is approximately 5.5242% per annum.

To find the nominal annual rate of interest required to double the money in six years, six months when compounded semi-annually, we can use the rule of 72:

t ≈ 72 / (r/100)

Where t is the time it takes to double the money and r is the annual interest rate. We want t to be 6.5 years and n = 2 for semi-annual compounding.

Substituting the values into the formula:

6.5 ≈ 72 / (r/100)

r/100 ≈ 72 / 6.5

r/100 ≈ 11.076923

r ≈ 11.076923 * 100

r ≈ 1107.6923

Therefore, the nominal annual rate of interest for money to double itself in six years, six months, compounded semi-annually, is approximately 3.5185% per annum.

To learn more about interest click here: brainly.com/question/26457073

#SPJ11

The additional cost incurred in dollars when production increases from 100 to 150 units is $225 and the additional cost incurred in dollars when production is increased from 400 units to 450 units is $281.25.

Marginal cost is the addition to the total cost resulting from producing an additional unit of output.

The formula for marginal cost is:

MC = ΔTC / ΔQ = ΔVC / ΔQ where MC is marginal cost, ΔTC is the change in total cost, ΔVC is the change in variable cost, and ΔQ is the change in quantity produced.

a. The marginal cost function is:

C ′(x) = 400 + 12x − 0.03x²

To find the additional cost incurred in dollars when production is increased from 100 units to 150 units, first find the marginal cost at 100 units and the marginal cost at 150 units. Then, subtract the marginal cost at 100 units from the marginal cost at 150 units to get the additional cost incurred in dollars.

The marginal cost at 100 units is :

C ′(100) = 400 + 12(100) − 0.03(100)²

= 400 + 1,200 − 300

= $1,300

The marginal cost at 150 units is:

C ′(150) = 400 + 12(150) − 0.03(150)²

= 400 + 1,800 − 675

= $1,525

The additional cost incurred in dollars when production is increased from 100 units to 150 units is:

= MC(150) - MC(100)

= $1,525 - $1,300

= $225

The answer is $225.

b) To find the additional cost incurred in dollars when production is increased from 400 units to 450 units, first find the marginal cost at 400 units and the marginal cost at 450 units. Then, subtract the marginal cost at 400 units from the marginal cost at 450 units to get the additional cost incurred in dollars. The marginal cost at 400 units is:

C ′(400) = 400 + 12(400) − 0.03(400)²

= 400 + 4,800 − 1,200

= $4,000

The marginal cost at 450 units is:

C ′(450) = 400 + 12(450) − 0.03(450)²

= 400 + 5,400 − 1,518.75

= $4,281.25

The additional cost incurred in dollars when production is increased from 400 units to 450 units is:

= MC(450) - MC(400)

= $4,281.25 - $4,000

= $281.25

The answer is $281.25.

Therefore, the marginal cost function is used to find the additional cost incurred in dollars when production is increased from a certain number of units to another number of units.

To know more about the marginal cost, visit:

brainly.com/question/31397351

#SPJ11