The statement "Let W be the set of all vectors in R² of the form [x, y] where x and y are any real numbers with 2x + y = 0. Then W is not a subspace of R²." is false. W is indeed a subspace of R².
To show that W is a subspace of R², we need to verify three properties: closure under addition, closure under scalar multiplication, and containing the zero vector.
1. Closure under addition: Let u = [x₁, y₁] and v = [x₂, y₂] be two vectors in W. We have 2x₁ + y₁ = 0 and 2x₂ + y₂ = 0. We need to show that u + v is also in W. The sum of the vectors is u + v = [x₁ + x₂, y₁ + y₂]. By substitution, we have 2(x₁ + x₂) + (y₁ + y₂) = 2x₁ + y₁ + 2x₂ + y₂ = 0 + 0 = 0. Thus, u + v satisfies the condition 2x + y = 0, and it belongs to W.
2. Closure under scalar multiplication: Let u = [x, y] be a vector in W, and let c be any real number. We need to show that cu is also in W. The scalar multiple of the vector is cu = [cx, cy]. By substitution, we have 2(cx) + (cy) = c(2x) + c(y) = c(2x + y) = c(0) = 0. Thus, cu satisfies the condition 2x + y = 0, and it belongs to W.
3. Containing the zero vector: The zero vector [0, 0] satisfies the condition 2(0) + (0) = 0. Therefore, the zero vector is in W.
Since W satisfies all the properties of a subspace, we can conclude that W is indeed a subspace of R².
To know more about linear algebra, refer here:
https://brainly.com/question/1952076#
#SPJ11
Arts and Crafts An arts and craft supply store has a large crate that contains brass, copper, and wood beads. Several friends take turns pushing their hands into the beads, grabbing one, recording the bead type, and placing the bead back into the crate. They then repeat the process. The table shows the count for each bead type. Write a probability model for choosing a bead. CAND Choosing Beads Brass Copper Wood 24 42 84
I really need help
The probability for choosing a bead is given as follows:
0.16 = 16%.
How to calculate a probability?The parameters that are needed to calculate a probability are listed as follows:
Number of desired outcomes in the context of a problem or experiment.Number of total outcomes in the context of a problem or experiment.Then the probability is then calculated as the division of the number of desired outcomes by the number of total outcomes.
The total number of outcomes in this problem is given as follows:
24 + 42 + 84 = 150.
Out of those, 24 are beads, hence the probability is given as follows:
24/150 = 12/75 = 0.16 = 16%.
Learn more about the concept of probability at https://brainly.com/question/24756209
#SPJ1
The polynomial C (x) = 6r² + 90x gives the cost, in dollars, of producing a rectangular container whose top and bottom are squares with side x feet and height 4 feet. Find the cost of producing a box with side x=6 feet. Type in only a number as your answer below.
The cost of producing a box with side [tex]x=6[/tex] feet is $3,960.
The polynomial [tex]C(x) = 6r^2 + 90x[/tex] gives the cost, in dollars, of producing a rectangular container whose top and bottom are squares with side x feet and height 4 feet.
Given that the value of x is 6 feet, we can substitute [tex]x = 6[/tex] into the given polynomial equation to find the cost of producing a box with side [tex]x = 6[/tex]feet.
[tex]C(x) = 6r^2 + 90xC(6)[/tex]
[tex]= 6r^2 + 90(6)C(6)[/tex]
[tex]= 6r^2 + 540C(6)[/tex]
[tex]= 6(6^2) + 540C(6)[/tex]
[tex]= 216 + 540C(6)[/tex]
[tex]= 756[/tex]
Therefore, the cost of producing a box with side [tex]x = 6[/tex] feet is $756.
Learn more about polynomial equation here:
https://brainly.com/question/20630027
#SPJ11
A researcher is interested in the relationship between birth order and personality. A sample of n = 100 people is obtained, all of whom grew up in families as one of three children. Each person is given a personality test, and the researcher also records the person's birth-order position (1st born, 2nd, or 3rd). The frequencies from this study are shown in the following table. On the basis of these data, can the researcher conclude that there is a significant relation between birth order and personality? Test at the .05 level of significance. Birth Position 1st 2nd Outgoing 13 31 Reserved 17 19 The null hypothesis states: Choose 3rd 16 4 The null hypothesis states: The research hypothesis states: The dfis: The critical value is: Our calculated chi-square is: Therefore we reject the null hypothesis (true or false) The expected frequencies for Outgoing [Choose] [Choose] [Choose] [Choose] Choose [Choose] Choose ents eams Our calculated chi-square is: Therefore we reject the null hypothesis (true or false) The expected frequencies for Outgoing. Birth Position 1st is: The expected frequencies for Outgoing, Birth Position 3rd s: The expected frequencies Reserved. Birth Position 2nd is: The expected frequencies Reserved. Birth Position 3rd is: [Choose] [Choose] [Choose] Choose [Choose] Choose 4
The null hypothesis states that there is no significant relationship between birth order and personality, while the research hypothesis states that there is a significant relationship between birth order and personality.
The degrees of freedom (df) for a chi-square test in this case would be calculated as (number of rows - 1) * (number of columns - 1). Since there are 3 birth positions (rows) and 2 personality types (outgoing and reserved, columns), the df would be [tex](3 - 1) * (2 - 1) = 2[/tex].
To determine the critical value at the 0.05 level of significance, we need to consult the chi-square distribution table with 2 degrees of freedom. The critical value for this test is 5.991.
To calculate the chi-square value, we need to compare the observed frequencies to the expected frequencies. The expected frequencies are calculated based on the assumption of independence between birth order and personality.
The observed frequencies are as follows:
Outgoing: 1st born = 13, 2nd born = 31, 3rd born = 16
Reserved: 1st born = 17, 2nd born = 19, 3rd born = 4
The expected frequencies can be calculated by using the formula:
Expected Frequency = (row total * column total) / grand total
For example, the expected frequency for Outgoing, 1st born would be:
Expected Frequency = [tex]\(\frac{{44 \times 30}}{{100}} = 13.2\)[/tex] (rounded to nearest whole number)
Calculate the expected frequencies for all cells in the table using the same formula.
Next, calculate the chi-square value using the formula:
[tex]\(\chi^2 = \sum \frac{{(\text{{observed frequency}} - \text{{expected frequency}})^2}}{{\text{{expected frequency}}}}\)[/tex]
Sum up the values for all cells in the table to obtain the chi-square value.
Compare the calculated chi-square value with the critical value from the chi-square distribution table. If the calculated chi-square value is greater than the critical value, we reject the null hypothesis. Otherwise, we fail to reject the null hypothesis.
The expected frequencies for Outgoing, Birth Position 1st is: 13
The expected frequencies for Outgoing, Birth Position 2nd is: 30
The expected frequencies for Outgoing, Birth Position 3rd is: 1
The expected frequencies for Reserved, Birth Position 1st is: 17
The expected frequencies for Reserved, Birth Position 2nd is: 18
The expected frequencies for Reserved, Birth Position 3rd is: 8
Calculate the chi-square value using the formula described above.
Compare the calculated chi-square value with the critical value of 5.991. If the calculated chi-square value is greater than 5.991, we reject the null hypothesis. Otherwise, if it is less than or equal to 5.991, we fail to reject the null hypothesis.
Based on the calculated chi-square value and comparison with the critical value, we can determine whether to reject or fail to reject the null hypothesis.
To know more about Value visit-
brainly.com/question/30760879
#SPJ11
Let G2x3 = [4 5 -2 1 6 7] and H2x3 = [1 -1 7 5 1 -7]
Find -6G-3H.
_____
Matrices are rectangular arrays of numbers or elements arranged in rows and columns. They are used in various mathematical operations, such as addition, subtraction, multiplication, and transformation calculations.
Given matrices are [tex]G_{2\times 3} = \left[\begin{array}{ccc}4&5&-2\\1&6&7\end{array}\right][/tex]
and [tex]H_{2\times 3} =\left[\begin{array}{ccc}1&-1&7\\5&1&-7\end{array}\right][/tex]
We have to find -6G - 3H. Here's how to do it:
First, let's find -6G.
Multiply each element in the matrix G by -6.-6
[tex]G=\left[\begin{array}{ccc}24&30&12\\-6&-36&-42\end{array}\right][/tex]
Next, we'll find 3H. Multiply each element in the matrix H by 3.3
[tex]H=\left[\begin{array}{ccc}3&-3&21\\15&3&-21\end{array}\right][/tex]
Finally, add the results of -6G and 3H elementwise to get the final answer.-6G - 3H
[tex]G=\left[\begin{array}{ccc}-21&-27&-9\\9&-33&-63\end{array}\right][/tex]
So the answer is -6G - 3H
[tex]G=\left[\begin{array}{ccc}-21&-27&-9\\9&-33&-63\end{array}\right][/tex]
To know more about Matrices visit:
https://brainly.com/question/30646566
#SPJ11
By using sum or difference formulas, cos(-a) can be written as OA. - sin(x) B. - cos(x) Oc.cos(x) D. sin(x) OE. All of the above OF. None of the above By using sum or difference formulas, cos(-a) can be written as OA. - sin(x) B. - cos(x) Oc.cos(x) D. sin(x) OE. All of the above OF. None of the above By using sum or difference formulas, cos(-a) can be written as OA. - sin(x) B. - cos(x) Oc.cos(x) D. sin(x) OE. All of the above OF. None of the above
By using sum or difference formulas, cos(-a) can be written as - cos(a). Explanation: We know that cosine is an even function of x, therefore,[tex]cos(-x) = cos(x)[/tex] .Then, by using the identity [tex]cos(a - b) = cos(a) cos(b) + sin(a) sin(b)[/tex], we can say that:[tex]cos(a - a) = cos²(a) + sin²(a).[/tex]
This simplifies to:[tex]cos(0) = cos²(a) + sin²(a)cos(0) = 1So, cos(a)² + sin(a)² = 1Or, cos²(a) = 1 - sin²[/tex](a)Similarly,[tex]cos(-a)² = 1 - sin²(-a)[/tex] Since cosine is an even function, [tex]cos(-a) = cos(a)[/tex] Therefore, [tex]cos(-a)² = cos²(a) = 1 - sin²(a)cos(-a) = ±sqrt(1 - sin²(a))'.[/tex]
This is the general formula for cos(-a), which can be written as a combination of sine and cosine. Since cosine is an even function, the negative sign can be written inside the square root: [tex]cos(-a) = ±sqrt(1 - sin²(a)) = ±sqrt(sin²(a) - 1) = -cos[/tex].
To know more about sum visit:
https://brainly.com/question/31538098
#SPJ11
Find the length of the helix r (3 sin(2t), -3cos (2t), 7t) through 3 periods.
The length of the helix through three periods is 6π × [tex]\sqrt{85}[/tex].
The helix is represented by the vector-valued function r(t) = (3 sin(2t), -3cos(2t), 7t), where t is the parameter.
To find the length of the helix through three periods, we need to integrate the magnitude of the derivative of r(t) over the desired interval.
The magnitude of the derivative of r(t) is given by
||r'(t)|| = [tex]\sqrt{(dx/dt)^2 + (dy/dt)^2 + (dz/dt)^2}[/tex]
where dx/dt, dy/dt, and dz/dt are the derivatives of each component of r(t) with respect to t.
Differentiating each component of r(t) gives us:
dx/dt = 6cos(2t)
dy/dt = 6sin(2t)
dz/dt = 7
Substituting these derivatives into the formula for the magnitude of the derivative, we have:
||r'(t)|| = [tex]\sqrt{(6cos(2t))^2 + (6sin(2t))^2 + 7^2}[/tex]
[tex]= \sqrt{(36cos^2(2t) + 36sin^2(2t) + 49)}\\ = \sqrt{(36(cos^2(2t) + sin^2(2t)) + 49)}\\ = \sqrt{(36 + 49)}[/tex]
= [tex]\sqrt{85}[/tex]
To find the length of the helix through three periods, we integrate ||r'(t)|| from t = 0 to t = 6π (three periods):
Length = ∫(0 to 6π) ||r'(t)|| dt
= ∫(0 to 6π) [tex]\sqrt{85}[/tex] dt
= [tex]\sqrt{85}[/tex] × ∫(0 to 6π) dt
= [tex]\sqrt{85}[/tex] × [t] (0 to 6π)
= [tex]\sqrt{85}[/tex] × (6π - 0)
= 6π × [tex]\sqrt{85}[/tex]
Therefore, the length of the helix through three periods is 6π × [tex]\sqrt{85}[/tex].
Learn more about derivative here:
https://brainly.com/question/30401596
#SPJ11
Please help me step by step with 2 parts
Expand the polynomial f into a product of irreducibles in the ring K[x] in the following cases: a, K € {R, C}, f = 25+ 2.23 E 6.x2 12; b. K = Z5, f = x5 + 3x4 + x3 + x2 + 3.
a) The factorization of f for the given case is:f = 2.23 E 6 (x + 3/2.23 E 3)(x + 8.92/2.23 E 3)
b) The factorization of ffor the given case is:f = x5 + 3x4 + x3 + x2 + 3 (irreducible in Z5[x]).
a) For the first case, where K € {R, C}, f = 25 + 2.23 E 6.x2 12; we have to factorize the given polynomial into a product of irreducibles in the ring K[x].
A polynomial is called irreducible in K[x] if it cannot be factored as a product of two non-constant polynomials in K[x].
(1) Factor 2.23 E 6 from the given polynomial:f = 2.23 E 6 (x² + 25/2.23 E 6 x + 12/2.23 E 6)
(2) Solve the quadratic equation x² + 25/2.23 E 6 x + 12/2.23 E 6 to get the two factors as(x + 3/2.23 E 3)(x + 8.92/2.23 E 3)
(3) Therefore, the factorization of f into a product of irreducibles in the ring K[x] for the given case is:f = 2.23 E 6 (x + 3/2.23 E 3)(x + 8.92/2.23 E 3)
b) Now, for the second case, where K = Z5, f = x5 + 3x4 + x3 + x2 + 3; we have to factorize the given polynomial into a product of irreducibles in the ring K[x].
In this case, we can use the factor theorem which states that if x - a is a factor of a polynomial f(x), then f(a) = 0.
(1) Check the possible values of x to find out which of them will make the given polynomial 0, that is f(x) = x5 + 3x4 + x3 + x2 + 3 = 0.
(2) The values of x in Z5 are {0, 1, 2, 3, 4}. Hence we can check each of these values to find the one which will make the given polynomial 0. If f(x) = 0 for some value of x, then x - a is a factor of f(x).
(3) On checking the given polynomial for each value of x in Z5, we find that it has no factors in Z5[x] of degree less than 5.
(4) Therefore, the factorization of f into a product of irreducibles in the ring K[x] for the given case is:f = x5 + 3x4 + x3 + x2 + 3 (irreducible in Z5[x])
Know more about the factorization
https://brainly.com/question/25829061
#SPJ11
consider the system:
y= 3x + 5
y= ax + b
what values for a and b make the system inconsistent? what values for a and b make the system consistent and dependent? explain
The values for a and b make the system inconsistent are a = 3 and b = 4
The values for a and b make the system consistent and dependent are a = 2 and b = 4
What values for a and b make the system inconsistent?From the question, we have the following parameters that can be used in our computation:
y= 3x + 5
y= ax + b
For the system to be inconsistent, it must have no solution
So, we have
a = 3 and b ≠ 5
Evaluate
a = 3 and b = 4
What values for a and b make the system consistent and dependent?Here, we have
y= 3x + 5
y= ax + b
For the system to be consistent, it must have solution
So, we have
a ≠ 3 and b ≠ 5
Evaluate
a = 2 and b = 4
Read more about equations at
https://brainly.com/question/148035
#SPJ1
Find the 5 number summary for the data shown
2 9
17 20
35 34
51 38
68 52
82 81 87 91
92
5 number summary:
O-O-O-O-O
Use the Locator/Percentile method described in your book, not your calculator.
To find the 5-number summary for the given data set, we need to determine the minimum, first quartile (Q 1), median (Q 2), third quartile (Q 3), and maximum values.
Minimum: The minimum value is the smallest observation in the data set. In this case, the minimum is 2. Q 1: The first quartile (Q 1) represents the 25th percentile, meaning that 25% of the data falls below this value. To find Q 1, we locate the position of the 25th percentile using the Locator/Percentile method. Since there are 15 data points in total, the position of the 25th percentile is (15 + 1) * 0.25 = 4. This means that Q1 corresponds to the fourth value in the ordered data set, which is 20.
Q 2 (Median): The median (Q 2) represents the 50th percentile, or the middle value of the data set. Again, using the Locator/Percentile method, we find the position of the 50th percentile as (15 + 1) * 0.50 = 8. Therefore, the median is the eighth value in the ordered data set, which is 38.
Q 3: The third quartile (Q 3) represents the 75th percentile. Following the same method, the position of the 75th percentile is (15 + 1) * 0.75 = 12. Q3 corresponds to the twelfth value in the ordered data set, which is 81.
Maximum: The maximum value is the largest observation in the data set. In this case, the maximum is 92.
Therefore, the 5-number summary for the given data set is as follows:
Minimum: 2
Q 1: 20
Median: 38
Q 3: 81
Maximum: 92
Learn more about percentile method here: brainly.com/question/16931477
#SPJ11
Suppose $v_1, v_2, v_3$ is an orthogonal set of vectors in $\mathbb{R}^5$ with $v_1 \cdot v_1=9, v_2 \cdot v_2=38.25, v_3 \cdot v_3=16$.
Let $w$ be a vector in $\operatorname{Span}\left(v_1, v_2, v_3\right)$ such that $w \cdot v_1=27, w \cdot v_2=267.75, w \cdot v_3=-32$.
Then $w=$ ______$v_1+$_______________ $v_2+$ ________$v_3$.
From the given question,$v_1 \cdot v_1=9$$v_2 \cdot v_2=38.25$$v_3 \cdot v_3=16$And, we have a vector $w$ such that $w \cdot v_1=27$, $w \cdot v_2=267.75$ and $w \cdot v_3=-32$.
Then we need to find the vector $w$ in terms of $v_1$, $v_2$ and $v_3$.
To find the vector $w$ in terms of $v_1$, $v_2$ and $v_3$, we use the following formula.
$$w = \frac{w \cdot v_1} {v_1 \cdot v_1} v_1 + \frac{w \cdot v_2}{v_2 \cdot v_2} v_2 + \frac{w \cdot v_3}{v_3 \cdot v_3} v_3$$
Substituting the given values, we get$$w = \frac{27}{9} v_1 + \frac{267.75}{38.25} v_2 - \frac{32}{16} v_3$$$$w = 3 v_1 + 7 v_2 - 2 v_3$$
Therefore, the vector $w$ can be written as $3v_1 + 7v_2 - 2v_3$.
Summary: Therefore, $w = 3 v_1 + 7 v_2 - 2 v_3$ is the required vector.
Learn more about vector click here:
https://brainly.com/question/25705666
#SPJ11
13. Let A be a symmetric tridiagonal matrix (i.e., A is symmetric and aij = 0 whenever li- j > 1). Let B be the matrix formed from A by deleting the first two rows and columns. Show that det(A) = a₁det(M₁1) - a2 det(B)
The proof of det(A) = a₁det(M₁1) - a2 det(B) where a₁ is the first element of the first row of A and M₁₁ is the principal minor of A is done.
Given information:
A symmetric tridiagonal matrix A is given.The matrix B is formed from A by deleting the first two rows and columns.
To prove: det(A) = a₁det(M₁1) - a2 det(B) where a₁ is the first element of the first row of A and M₁₁ is the principal minor of A obtained by deleting its first row and first column.
For any matrix A with an element ai, j not equal to zero, there is a cofactor Cij.
The adjugate of A is the transpose of the matrix of cofactors.
In other words, given a matrix A with an element ai, j, we define the minor Mi, j to be the determinant of the submatrix obtained by deleting the ith row and jth column, and the cofactor Cij to be (-1)^(i+j)Mi, j.
We can then define the adjugate matrix of A as the transpose of the matrix of cofactors of A.
Let A be the tridiagonal matrix and B be the matrix obtained from A by deleting the first two rows and columns.
So, det(A) is the sum of the products of the elements of any row or column of A with their corresponding cofactors.
If we choose the first column and compute the cofactors of the first two elements, we get:
a₁C₁,₁ - a₂C₂,₁ = a₁det(M₁,₁) - a₂det(M₂,₁)
Also, C₁,₁ = det(B), C₂,₁ = -a₂, and
det(M₁,₁) = a₁.
Hence,a₁det(M₁,₁) - a₂det(M₂,₁) = a₁a₁ - a₂(-a₂)
= a₁² + a₂² ≥ 0
Therefore, det(A) ≥ 0.
Know more about the transpose
https://brainly.com/question/14977669
#SPJ11
In two sentences, define primary data and secondary data. [4 marks] . Identify the population in each of the following data collection scenarios. [2 marks] a) A school wants to know what type of music to play at the next Grad dance. b) The Ministry of Education wants to know how people feel about self-direct studies courses they have taken.
The primary data is firsthand information collected for a specific research purpose, while secondary data is existing data collected by others for a different purpose. In scenario
(a), the population would be the students attending the school's Grad dance, and in scenario
(b), it would be the people who have taken self-directed studies courses surveyed by the Ministry of Education.
Primary data refers to data collected directly from the source through methods like surveys, interviews, observations, or experiments. It is original and tailored to address specific research objectives. In scenario (a), the school wants to know what type of music to play at the next Grad dance, so they would directly collect data from the students attending the dance to determine their music preferences.
Therefore, the population for this scenario would be the students attending the Grad dance.
Secondary data, on the other hand, is data that already exists and was collected by someone else for a different purpose. It can include sources like government reports, academic journals, or previously conducted surveys. In scenario (b), the Ministry of Education wants to gauge how people feel about the self-directed studies courses they have taken.
The population for this scenario would be the individuals who have participated in these courses and are being surveyed by the Ministry to gather their feedback and opinions.
Learn more about Primary data
brainly.com/question/20382314
#SPJ11
Fricker's is a family restaurant chain located primarily in the southeastern part of the United States. It offers a full dinner menu, but its specialty is chicken. Recently, Bernie Frick, the owner and founder, developed a new spicy flavor for the better in which the chicken is cooked. Before replacing the current flavor, he wants to conduct some tests to be sure that patron will like the spicy flavor better.
To begin, bernie selects a random sample of 15 customers. Each sampled customers is given a small piece of the current chicken and asked to rate is overall taste on scale of 1 to 20. A value near 20 indicate to participants liked the flavor, whereas a score near 0 indicates they did not like the flavor. Next, the same 15 participants.
In order to determine if customers prefer the new spicy flavor of chicken over the current flavor, Bernie Frick, the owner and founder of Fricker's restaurant chain, selected a random sample of 15 customers.
Each customer was given a small piece of the current chicken flavor and asked to rate its overall taste on a scale of 1 to 20, where a higher score indicates liking the flavor more. The purpose of this rating is to establish a baseline for customer preferences. Bernie Frick, the owner of Fricker's restaurant chain, wants to introduce a new spicy flavor for the chicken. To ensure that customers will prefer this new flavor over the current one, he decides to conduct a taste test. A random sample of 15 customers is selected, and they are given a small piece of the current chicken flavor to taste. They are then asked to rate the taste on a scale of 1 to 20, where higher scores indicate a better liking for the flavor. This rating serves as a baseline to compare against the ratings for the new spicy flavor, ultimately determining customer preference.
Learn more about customers here : brainly.com/question/31192428
#SPJ11
Find the sample variance for the amount of European auto sales for a sample of 6 years shown. The data are in millions of dollars. 11.2, 11.9, 12.0, 12.8, 13.4, 14.3
a. 1.13
b. 11.92
c. 1.28
d. 2.67
The sample variance for the given data is approximately 1.276, which is closest to option (c) 1.28.
Sample Variance = (Σ(x - μ)²) / (n - 1)
Where:
Σ denotes the sum of,
x represents each data point,
μ represents the mean of the data, and
n represents the sample size.
Let's calculate the sample variance for the given data:
Step 1: Calculate the mean (μ)
μ = (11.2 + 11.9 + 12.0 + 12.8 + 13.4 + 14.3) / 6
= 75.6 / 6
= 12.6
Step 2: Calculate the squared differences from the mean for each data point
Squared differences = (11.2 - 12.6)² + (11.9 - 12.6)² + (12.0 - 12.6)² + (12.8 - 12.6)² + (13.4 - 12.6)² + (14.3 - 12.6)²
= (-1.4)² + (-0.7)² + (-0.6)² + (0.2)² + (0.8)² + (1.7)²
= 1.96 + 0.49 + 0.36 + 0.04 + 0.64 + 2.89
= 6.38
Step 3: Divide the sum of squared differences by (n - 1)
Sample Variance = 6.38 / (6 - 1)
= 6.38 / 5
= 1.276
Learn more about sample variance here:
https://brainly.com/question/14988220
#SPJ11
Sketch the graph of y₁ = e-05 cos (6t) in magenta, y2 = etsin (5t) in cyan and ya e-cos (4t) in black on the same axis using MATLAB on the interval Also label the axes and give an appropr
In mathematics, a graph is a group of vertices (sometimes called nodes) connected by edges. Numerous disciplines, including computer science, operations research, the social sciences, and network analysis, frequently use graphs.
To sketch the graph of
y₁ = e-0.5 cos (6t) in magenta,
y₂ = et sin (5t) in cyan and
ya e-cos (4t) in black on the same axis using MATLAB, follow these steps below:
Step 1: Create a new script file in MATLAB.
Step 2: Enter the code to create the graph. The code should look something like this:
t=0:0.01:10;
y1=exp(-0.5)*cos(6*t);
y2=exp(t)*sin(5*t);
y3=exp(-t).*cos(4*t);
plot(t,y1,'m',t,y2,'c',t,y3,'k')
xlabel('Time')
ylabel('Amplitude')
title('Graph of y1, y2, and y3')
Step 3: Save the file and run it to produce the graph. The code above generates the graph of
y₁ = e-0.5 cos (6t) in magenta,
y₂ = et sin (5t) in cyan and
ya e-cos (4t) in black on the same axis using MATLAB on the interval.
To know more about Graph visit:
https://brainly.com/question/17267403
#SPJ11
Differentiate. Do Not Simplify.
a) f(x)=√3 cos(x) - e-²x
c) f(x) =cos(x)/ x
e) y = 3 ln(4-x+ 5x²)
b) f(x) = 5tan (√x)
d) f(x) = sin(cos(x²))
f) y = 5^x(x^5)
The derivative of f(x) = √3 cos(x) - [tex]e^{(-2x)[/tex] is f'(x) = -√3 sin(x) + 2[tex]e^{(-2x)[/tex]. The rest will be calculated below using chain rule.
a) To differentiate f(x) = √3 cos(x) - [tex]e^{(-2x)[/tex], we use the chain rule and power rule. The derivative of cos(x) is -sin(x), and the derivative of [tex]e^{(-2x)[/tex]is -2[tex]e^{(-2x)[/tex]). The derivative of √3 cos(x) is obtained by multiplying √3 with the derivative of cos(x), which gives -√3 sin(x). Combining these results, we get f'(x) = -√3 sin(x) + 2[tex]e^{(-2x)[/tex].
b) Differentiating f(x) = 5tan(√x) requires the chain rule and the derivative of tan(x), which is sec²(x). The chain rule states that if we have a composite function, f(g(x)), the derivative is f'(g(x)). g'(x). In this case, f'(g(x)) = 5sec²(√x), and g'(x) = (1/2√x). Multiplying these together, we get f'(x) = (5/2√x)sec²(√x).
c) For f(x) = cos(x)/(x e), we apply the quotient rule. The quotient rule states that if we have f(x) = g(x)/h(x), the derivative is (g'(x)h(x) - g(x)h'(x))/(h(x))². In this case, g(x) = cos(x), h(x) = xe, and their derivatives are g'(x) = -sin(x) and h'(x) = e - x. Plugging these values into the quotient rule, we get f'(x) = (-xsin(x)e - cos(x))/x²e.
d) To differentiate f(x) = sin(cos(x²)), we use the chain rule. The derivative of sin(x) is cos(x), and the derivative of cos(x²) is -2xsin(x²). Applying the chain rule, we multiply these together to obtain f'(x) = -2xcos(x²)sin(cos(x²)).
e) The derivative of y = 3 ln(4-x+5x²) can be found using the chain rule and the derivative of ln(x), which is 1/x. Applying the chain rule, we multiply the derivative of ln(4-x+5x²), which is (1/(4-x+5x²)) times the derivative of the expression inside the natural logarithm. The derivative of (4-x+5x²) is - -10x + 1. Combining these results, we get
y' = (-10x + 1)/(4 - x + 5x²).
f) For y = [tex]5^x(x^5)[/tex], we use the product rule and the power rule. The product rule states that if we have f(x) = g(x)h(x), the derivative is g'(x)h(x) + g(x)h'(x). In this case, g(x) = [tex]5^x[/tex] and h(x) = [tex]x^5[/tex]. The derivative of [tex]5^x[/tex] is obtained using the power rule and is [tex]5^xln(5)[/tex], and the derivative of [tex]x^5[/tex] is [tex]5x^4[/tex]. Applying the product rule, we get y' = [tex]5^x(x^5ln(5) + 5x^4)[/tex].
Learn more about chain rule here:
https://brainly.com/question/31585086
#SPJ11
Use the standard second-order centered-difference approximation to discretize the Poisson equation in one dimension with periodic boundary conditions: u"(t) u(0) f(t), 0
The standard second-order centered-difference approximation to discretize the Poisson equation in one dimension with periodic boundary conditions is shown below:
Given the Poisson equation in one dimension with periodic boundary conditions:
u''(x) = f(x), 0 < x < L,u(0) = u(L),
where u is the unknown function, f is the known forcing function, and L is the length of the domain.
The standard second-order centered-difference approximation for the second derivative is:
(u_{i+1}-2u_i+u_{i-1})/(Δx^2)=f_i
where Δx is the spatial step size, and f_i is the value of f at the ith grid point.
The periodic boundary conditions imply that u_0=u_N, where N is the number of grid points.
Thus, we can write the approximation for the boundary points as:
(u_1-2u_0+u_N)/(Δx^2)=f_0and(u_0-2u_1+u_{N-1})/(Δx^2)=f_1
These equations can be combined with the interior points to form a system of N linear equations for the N unknowns u_0, u_1, ..., u_{N-1}.
To know more about Poisson equation visit:
brainly.com/question/30388228
#SPJ11
The solution to the discretized equations can be obtained by solving the linear system of equations [tex][A]{u} = {f}[/tex], subject to the boundary condition [tex]u_0 = u_{N-1}[/tex].
To discretize the Poisson equation in one dimension with periodic boundary conditions, we can use the standard second-order centered-difference approximation.
Let's consider a uniform grid with N points in the interval [0, L] and a grid spacing h = L/N.
The grid points are denoted as [tex]x_i[/tex] = i × h, where i = 0, 1, 2, ..., N-1.
We can approximate the second derivative of u with respect to x using the centered-difference formula:
[tex]u''(x_i) \approx (u(x_{i+1}) - 2u(x_i) + u(x_{i-1})) / h^2[/tex]
Applying this approximation to the Poisson equation u''(x) = f(x), we have:
[tex](u(x_{i+1}) - 2u(x_i) + u(x_{i-1})) / h^2 = f(x_i)[/tex]
To handle the periodic boundary conditions, we need to impose the condition u(0) = u(L).
Let's denote the value of u at the first grid point u_0 = u(x_0) and the value of u at the last grid point [tex]u_{N-1} = u(x_{N-1})[/tex].
Then the discretized equation at the boundary points becomes:
[tex](u_1 - 2u_0 + u_{N-1}) / h^2 = f_0 -- > u_0 = u_{N-1}[/tex]
Now, we have N equations for the N unknowns [tex]u_0, u_1, ..., u_{N-1}[/tex], excluding the boundary condition equation.
We can represent these equations in matrix form as:
[tex][A]{u} = {f}[/tex],
where [A] is an (N-1) x (N-1) tridiagonal matrix given by:
[A] = 1/h² ×
| -2 1 0 ... 0 1 |
| 1 -2 1 ... 0 0 |
| 0 1 -2 ... 0 0 |
| ... ... ... ... ... ... |
| 0 0 0 ... -2 1 |
| 1 0 0 ... 1 -2 |
and {u} and {f} are column vectors of size (N-1) given by:
[tex]{u} = [u_1, u_2, ..., u_{N-2}, u_{N-1}]^T,[/tex]
[tex]{f} = [f_1, f_2, ..., f_{N-2}, f_{N-1}]^T,[/tex]
with [tex]f_i = f(x_i) for i = 0, 1, ..., N-1[/tex] (excluding the boundary point f(x_0)).
The solution to the discretized equations can be obtained by solving the linear system of equations [tex][A]{u} = {f}[/tex], subject to the boundary condition [tex]u_0 = u_{N-1}[/tex].
Note that the equation for [tex]u_0 = u_{N-1}[/tex] can be added as a row to the matrix [A] and the corresponding entry in the vector {f} can be modified accordingly to enforce the boundary condition.
Learn more about Poisson equation click;
https://brainly.com/question/30388228
#SPJ4
suppose that the graph of ′ is given below. graph of the piecewise linear function connecting (0,2), (3,2), (4,0), and (5,-2). at what value does cease being linear?
We are given the graph of a piecewise linear function as shown in the figure below: Now, the function is defined as a straight line between the points (0,2) and (3,2).The function ceases to be linear at x = 3 and x = 4
This means that the slope of the function between these two points is zero, because the value of y does not change. This slope is the same as the slope between the points (3,2) and (4,0), because the graph forms a continuous line. However, at the point (4,0), the slope of the function changes abruptly, as it becomes negative. Similarly, between the points (4,0) and (5,-2), the slope of the function remains the same because the graph forms a continuous line again. Therefore, we can say that the value at which the function ceases to be linear is at x=4. The value at which the given piecewise linear function ceases to be linear is at x = 4. Between the points (0,2) and (3,2), the function is defined as a straight line with zero slope because the value of y does not change. This slope is the same as the slope between the points (3,2) and (4,0), as the graph forms a continuous line. However, at the point (4,0), the slope of the function changes abruptly, becoming negative. Between the points (4,0) and (5,-2), the slope of the function remains the same because the graph forms a continuous line. The given piecewise linear function ceases to be linear at x = 4.
So we can say that a piecewise linear function consists of two or more linear functions. The linear functions are connected at specific points where there is a change in the slope of the function.
to know more about piecewise linear function visit:
brainly.com/question/31806828
#SPJ11
Question 30 1.25 out of 1.25 points
Let the set H = {x | x is a hexadecimal digit)
Let the set P - 12,3,5,7, 17, 19, 23, 29, 31). Let R be a relation from the set to the set P where R-((a,b) | DEM such that 4 sa<9. bE and b>10). Evaluate the following: |H|= [h] [P] = [p]
[H U PI = [union]
[R] = [r]
The values of the required terms are as follows:
H|= 16
[h] = 16
[P] = 9[
R] = 14
|H U P| = 17
[H U P] = 17
[R] = 35
[r] = 35
Given that the set H = {x | x is a hexadecimal digit)Let the set P - 12, 3, 5, 7, 17, 19, 23, 29, 31).
Let R be a relation from the set to the set P where
R = {(a, b) | a, b ∈P and 4 ≤a < 9, b > 10}.
Then, |H|= 16 [h]
= 16[P]
= 9[R]
= 14.
Using these values, we need to calculate |H U P| and [R].
Union of H and P can be found as follows: H ∪P = {x : x is a hexadecimal digit or x is a prime number}
We know that P contains all prime numbers less than 32, therefore, P U {x : x is a prime number and x > 31}
= {x : x is a prime number} = P.
Hence,|H U P| = |H| + |P| - |H ∩ P|
Now, we need to calculate the value of |H ∩ P|, which is the number of primes that are also hexadecimal digits.
The hexadecimal digits are {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F}.
The primes in P are {2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31}.
The primes that are also hexadecimal digits are 2, 3, 5, 7, 11, 13, 17, 19, 23, 29. Hence, |H ∩ P| = 10.
Therefore,|H U P| = |H| + |P| - |H ∩ P| = 16 + 11 - 10 = 17.
Thus, [H U P] = 17
Given the value of R as mentioned above, we need to calculate [R].
Since a ∈ {12, 13, 14, 15, 16, 17, 18} and b ∈ {17, 19, 23, 29, 31},
the number of ordered pairs that satisfy the condition of R is 7 × 5 = 35. Hence, [R] = 35.
Hence, the values of the required terms are as follows
:|H|= 16
[h] = 16
[P] = 9[
R] = 14
|H U P| = 17
[H U P] = 17
[R] = 35
[r] = 35
To learn more about digits visit;
https://brainly.com/question/30142622
#SPJ11
A researcher uses a sample of 20 college sophomores to determine whether they have any preference between two smartphones. Each student uses each phone for one day and then selects a favorite. If 14 students select the first phone and only 6 choose the second, then what is the value for x2?
[tex]X_{2}[/tex] = 36.4 is the value for [tex]X_{2}[/tex].
The given problem can be solved by using the chi-square test. [tex]x^{2}[/tex] is used to evaluate whether the observed sample proportions match the expected population proportions.
A researcher uses a sample of 20 college sophomores to determine whether they have any preference between two smartphones. Each student uses each phone for one day and then selects a favorite.
If 14 students select the first phone and only 6 choose the second.
Null Hypothesis
[tex]H_{0} : P_{1} = P_{2}[/tex]
where p1 and p2 are the proportions of college sophomores who prefer phone 1 and phone 2, respectively.
Alternate Hypothesis is
[tex]H_{1} : P_{1} \neq P_{2}[/tex]
The sample is large and the variables are dichotomous, so the test statistic will follow a normal distribution.
We will estimate the test statistic using the chi-square test, which is given by [tex]X_{2} = (O_{1} - E_{1} )_{2} /E_{1} + (O_{2} - E_{2} )_{2} /E_{2} ,[/tex]
where O1 and O2 are the observed frequencies of phone 1 and phone 2 respectively, and E1 and E2 are the expected frequencies of phone 1 and phone 2, respectively.
E1 = (14 + 6)/2 * 20
= 10 * 20
= 200/2
= 100
E2 = (14 + 6)/2 * 20
= 10 * 20
= 200/2
= 100O1
= 14
and [tex]O_{2}[/tex] = 6[tex]X_{2}[/tex]
= (O₁ − E₁)₂/E₁ + (O₂ − E₂)₂/E₂
= (14 − 100)2/100 + (6 − 100)2/100
= 36.4
So, the value of x₂ is 36.4.
Thus, the deatail ans to the question is x₂ = 36.4.
Learn more about chi-square test
brainly.com/question/32120940
#SPJ11
Use the cofunction and reciprocal identities to complete the equation below. cot 69° = tan 1 69° cot 69° = tan (Do not include the degree symbol in your answer.) O 1 cot 69° = 69°
The correct completion of the equation is: cot 69° = 1 / tan 21° .Using the cofunction identity for cotangent and tangent, we have: cot 69° = 1 / tan (90° - 69°)
Since 90° - 69° = 21°, the equation becomes:
cot 69° = 1 / tan 21°
Therefore, the correct completion of the equation is:
cot 69° = 1 / tan 21°
To know more about Tangent visit-
brainly.com/question/10053881
#SPJ11
D Question 1 Find the domain of the vector function
r(t) = (In(4t), 1/t-2, sin(t)) O (0,2) U (2,[infinity]) O (-[infinity], 2) U (2,[infinity]) O (0,4) U (4,[infinity]) O (-[infinity]0,4) U (4,[infinity]) O (0, 2) U (2,4) U (4,[infinity])
The domain of the vector function is (0,2) U (2,4) U (4,[infinity]), excluding t = 0 and t = 2.
The vector function consists of three components: ln(4t), 1/(t-2), and sin(t). In the first interval (0,2), the function is defined for all t values between 0 and 2, excluding the endpoints.
In the second interval (2,4), the function is defined except at t = 2, where the second component results in division by zero. For t values greater than 4 or less than 0, all three components are defined and well-behaved.
Hence, the domain of the vector function is (0,2) U (2,4) U (4,[infinity]), excluding t = 0 and t = 2 due to division by zero.
Learn more about Vector function click here :brainly.com/question/13151723
#SPJ11
Find the solution of the following equation using integrating factor method:
(y^2−3xy−2x^2)dx+(xy−x^2)dy = 0
By multiplying the integrating factor with the original equation, we obtain the exact differential equation. Then, we integrate both sides to find the solution.
The given equation is (y^2 - 3xy - 2x^2)dx + (xy - x^2)dy = 0. To apply the integrating factor method, we rearrange the equation into the form of (Mdx + Ndy) = 0. Here, M = y^2 - 3xy - 2x^2 and N = xy - x^2.
Next, we calculate the integrating factor, denoted by μ. The integrating factor is given by μ = e^(∫(dN/dx - dM/dy) / N dx). By evaluating the derivatives, we find that dN/dx - dM/dy = (2xy - 3y - 2x) - (3x - 2y). Simplifying, we get dN/dx - dM/dy = -y + x.
Substituting this result into the equation for the integrating factor, we have μ = e^(∫(-y + x)/N dx). In this case, N = xy - x^2. Integrating (-y + x)/N dx, we get (∫(-y + x)/(xy - x^2) dx = -∫(y/x - 1) dx = -y ln|x| - x + C.
Therefore, the integrating factor is μ = e^(-y ln|x| - x + C), which simplifies to μ = e^(-y ln|x|) * e^(-x) * e^C.
By multiplying the integrating factor with the original equation, we obtain the exact differential equation. Then, we integrate both sides to find the solution.
To learn more about derivatives click here, brainly.com/question/25324584
#SPJ11
Prove the summation formula of the odd numbers: n k=1 (2k-1) = n²
The summation formula of the odd numbers is proved as follows:[tex]∑_(k=1)^(2k-1)=k²[/tex]. The summation formula of the odd numbers can be proved using mathematical induction. Let's suppose that the formula holds for n = k.
That means,[tex]∑_(k=1)^(2k-1)=k²[/tex]
Now, let's prove that the formula holds for [tex]n = k + 1[/tex]as well.
[tex]∑_(k=1)^(2(k+1)-1)=(k+1)²[/tex]
Applying the summation formula of the odd numbers, we get:
[tex]∑_(k=1)^(2k+1-1)[/tex]
[tex]=(k+1)²∑_(k=1)^(2k-1+2)[/tex]
[tex]=(k+1)²∑_(k=1)^(2k-1)+(2k)+(2k+1)[/tex]
[tex]=(k+1)²[/tex]
We know that [tex]∑_(k=1)^(2k-1) = k²[/tex]
So, substituting this value, we get: [tex]k²+(2k)+(2k+1)=(k+1)²[/tex]
Simplifying the equation, we get: [tex]2k² + 4k + 1 = (k + 1)²[/tex]
Expanding the right-hand side of the equation, we get:
[tex]mk² + 2k + 1[/tex]
Simplifying further, we get:[tex]m2k² + 4k + 1 = k² + 2k + 1 + k[/tex]
Therefore,[tex]2k² + 4k + 1 = k² + 3k + 1[/tex]
Rearranging the terms, we get: [tex]k² - k² + 3k = 4k - 12k = -k[/tex]
Therefore, k = -1
Substituting this value of k in the equation k² - k² + 3k
= 4k - 1,
we get: 0 = 0
Hence, we can say that the formula holds for n = k + 1 as well, which means it holds for all positive integers n. Therefore, the summation formula of the odd numbers is proved as follows:
[tex]∑_(k=1)^(2k-1)=k²[/tex]
To know more about summation visit :
https://brainly.com/question/29334900
#SPJ11
PLS HELP ITS MY LAST QUESTION TO GRADUATE IN MATHS PLEASE HELP I NEED IT STEP BY STEP PLEASEE
a)
Given,
3/x+2 = 1/7-x
Now further simplifying,
3(7-x) = x+2
21 - 3x = x + 2
19 = 4x
x = 19/4
Hence for the given expression the value of x is 19/4
b)
Given,
3-x/x-5 - 2x²/x² - 3x 10 = 2/x+2
Factorize the quadratic equation,
x² - 3x -10 = 0
(x+2)(x-5) = 0
3-x/x-5 - 2x²/ (x+2)(x-5) = 2/x+2
Taking LCM,
(3-x)(x-2) - 2x²/(x-5)(x+2) = 2/x+2
Further simplifying,
(3-x)(x-2) - 2x²= 2(x-5)
x² - 3x - 4 = 0
x² -4x +x - 4 = 0
x(x-4) + 1(x-4) = 0
(x+1)(x-4) = 0
x = -1 , 4 .
Hence for the given expression the value of x is -1, 4 .
Learn more about quadratic equation,
https://brainly.com/question/30098550
#SPJ1
The exponential distribution is a special case of which of the following distributions ? (Hint: If you can't remember, you can simply look at the various pdf's.) Erlang Gamma Weibull All of the above.
The exponential distribution is a special case of the Erlang distribution with the shape parameter k equal to 1.
The exponential distribution is a continuous probability distribution that models the time between events that follow a Poisson process. The Poisson process is a counting process that is used to model events that happen at a constant average rate and independently of the time since the last event. The exponential distribution is parameterized by a rate parameter λ, which represents the average number of events that happen in a unit of time. The probability density function (PDF) of the exponential distribution is given by: [tex]f(x) = λe-λx[/tex], where x ≥ 0 and λ > 0.The Erlang distribution is a continuous probability distribution that models the time between k events that follow a Poisson process. The Erlang distribution is parameterized by a shape parameter k and a rate parameter λ.
The probability density function (PDF) of the Erlang distribution is given by:[tex]f(x) = λke-λx xk-1 / (k - 1)![/tex] , where x ≥ 0 and k, λ > 0. The exponential distribution is a special case of the Erlang distribution with the shape parameter k equal to 1.
To know more about Exponential distribution visit-
https://brainly.com/question/30669822
#SPJ11
The volume of a cylinder of height 9 inches and radius r inches is given by the formula V = 9πr². Which is the correct expression for dv/dt?
Dv/dt =18πrdr/dtdh/dt
Dv/dt=18πr/dt
Dv/dt=0
Dv/dt=9πr².dr/dt
Dv/dt=18πrdr/dt
Suppose that the radius is expanding at a rate of 0.4 inches per second. How fast is the volume changing when the radius is 2.8 inches? Use at least 5 decimal places in your answer. ____ cubic inches per second
The volume is changing at a rate of 7.0752 cubic inches per second when the radius is 2.8 inches.
Given the height of the cylinder, h = 9 inches
Radius of the cylinder, r = r inches
Volume of the cylinder, V = 9πr²
The correct expression for dv/dt is Dv/dt = 18πrdr/dt
Since the radius of the cylinder is expanding at a rate of 0.4 inches per second, the rate of change of the radius, dr/dt = 0.4 inches per second. When the radius is 2.8 inches, r = 2.8 inches.
Substituting these values in the expression for Dv/dt,
we have: Dv/dt = 18πr dr/dt= 18 × π × 2.8 × 0.4= 7.0752 cubic inches per second.
Therefore, the volume is changing at a rate of 7.0752 cubic inches per second when the radius is 2.8 inches.
To learn more about Volume of the cylinder visit:
brainly.com/question/27033747
#SPJ11
Solve for x and y by elimination: 2x-5y = -12 12. 4x + 5y = 6 3x - 4y = -8 3x-y=10 13. 14. 15. 16. 17. 5x-2y=6 3x+4y=14 3x-2y=0 9x-12y = -3 5x-6y=4 10x+18y = 2 y-x=-1 y-x = 2 18. 19. 20. 21. 22. 23. 3
To solve the system of equations using elimination, we can manipulate the equations by adding or subtracting them to eliminate one variable at a time.
12. Given the equations:
2x - 5y = -12
4x + 5y = 6
Adding these two equations eliminates the variable y:
(2x - 5y) + (4x + 5y) = -12 + 6
6x = -6
x = -1
Substituting the value of x into either of the original equations, we can solve for y:
2(-1) - 5y = -12
-2 - 5y = -12
-5y = -10
y = 2
Therefore, the solution to the system of equations is x = -1 and y = 2.
13. Given the equations:
3x - 4y = -8
3x - y = 10
Subtracting the second equation from the first equation eliminates the variable x:
(3x - 4y) - (3x - y) = -8 - 10
3y = -18
y = -6
Substituting the value of y into either of the original equations, we can solve for x:
3x - (-6) = 10
3x + 6 = 10
3x = 4
x = 4/3
Therefore, the solution to the system of equations is x = 4/3 and y = -6.
The remaining systems of equations can be solved using a similar approach by applying the elimination method to eliminate one variable at a time and then solving for the remaining variables.
To learn more about Variable - brainly.com/question/15078630
#SPJ11
Let f(x) = 3x + 3 and g(x) = -2x - 5. Compute the following. (a) (fog)(x) ____
(b) (fog)(7)
____ (c) (gof)(x)
____
(d) (gof)(7)
____
The values are,(a) (fog)(x) = -6x - 12(b) (fog)(7)
= -54(c) (gof)(x)
= -6x - 11(d) (gof)(7)
= -53.
Given the two functions f(x) = 3x + 3 and g(x) = -2x - 5.
We need to compute the following.
(a) (fog)(x) ____
(b) (fog)(7) ____
(c) (gof)(x)____
(d) (gof)(7)____
(a) (fog)(x)
To find (fog)(x), we have to plug g(x) into f(x).
Hence (fog)(x) = f(g(x))
= f(-2x - 5)
Substitute g(x) = -2x - 5 into f(x) f(x) = 3x + 3
Therefore (fog)(x) = f(g(x))
= f(-2x - 5)
= 3(-2x - 5) + 3
= -6x - 15 + 3
= -6x - 12(b) (fog)(7)
To find (fog)(7), we have to plug 7 into g(x) first, then plug the result into
f(x).(fog)(7) = f(g(7))
= f(-2(7) - 5)
= f(-19)
= 3(-19) + 3
= -57 + 3
= -54(c) (gof)(x)
To find (gof)(x), we have to plug f(x) into g(x).
Hence
(gof)(x) = g(f(x))
= g(3x + 3)
Substitute f(x) = 3x + 3 into g(x) g(x) = -2x - 5
Therefore (gof)(x) = g(f(x))
= g(3x + 3)
= -2(3x + 3) - 5
= -6x - 6 - 5
= -6x - 11(d) (gof)(7)
To find (gof)(7), we have to plug 7 into f(x) first, then plug the result into
g(x).(gof)(7) = g(f(7))
= g(3(7) + 3)
= g(24)
= -2(24) - 5
= -48 - 5
= -53
Therefore, the values are,(a) (fog)(x) = -6x - 12(b) (fog)(7) = -54(c) (gof)(x) = -6x - 11(d) (gof)(7) = -53.
Know more about functions here:
https://brainly.com/question/2328150
#SPJ11
*differential equations* *will like if work is shown correctly and
promptly
13. Find a particular solution of the linear system given. x'=3x-y y'=5x-3y where x(0) = 1, y(0) = -1
the particular solution of the given linear system of differential equations with the given initial conditions x(0) = 1, y(0) = -1 is,
x = (2/3) e^(-5t) + (2/3) e^(3t)
y = (8/5) e^(-5t) - (4/5) e^(3t)
Given the linear system is,
x' = 3x - y ------(1)
y' = 5x - 3y ------(2)
Using initial conditions x(0) = 1, y(0) = -1
Now we solve for x in equation (1),x' = 3x - y
[tex]dx/dt = 3x - y[/tex]
[tex]dx/(3x - y) = dt.[/tex]
The left-hand side is the derivative of the logarithm of the absolute value of the denominator, while the right-hand side is the integration of a constant:1/3 ln|3x - y| = t + c1. ------------(3)
Using the initial condition x(0) = 1,
x(0) = 1 = (1/3) ln|3(1) - (-1)| + c1c1
= 1/3 ln(4) + k1c1
= ln(4^(1/3)k1)
Now, substituting the value of c1 in equation (3),
1/3 ln|3x - y| = t + 1/3 ln(4) + k1
Taking exponentials,
|3x - y| = e^3 (4) e^3 (k1) e^3t
3x - y = ± 4e^3 e^3t e^3(k1) ----- (4)
Now, we solve for y in equation (2),y' = 5x - 3ydy/dt = 5x - 3ydy/(5x - 3y) = dt
The left-hand side is the derivative of the logarithm of the absolute value of the denominator, while the right-hand side is the integration of a constant:1/5 ln|5x - 3y| = t + c2. -------------(5)Using the initial condition y(0) = -1,
y(0) = -1
= (1/5) ln|
5(1) - 3(-1)| + c2
c2 = -1/5 ln(8) + k2
c2 = ln(8^(-1/5)k2)
Now, substituting the value of c2 in equation (5),
1/5 ln|5x - 3y| = t - 1/5 ln(8) + k2
Taking exponentials,
|5x - 3y| = e^(-5) (8) e^(-5k2) e^5t
5x - 3y = ± 8e^(-5) e^(-5t) e^(-5k2) -------------- (6)
Equations (4) and (6) are a system of linear equations in x and y.
Multiplying equation (4) by 3 and equation (6) by -1,
we get: 9x - 3y = ± 12e^3 e^3t e^3(k1) ----- (7)
3y - 5x = ± 8e^(-5) e^(-5t) e^(-5k2) ------------ (8)
Adding equations (7) and (8),
12x = ± 12e^3 e^3t e^3(k1) ± 8e^(-5) e^(-5t) e^(-5k2)
Hence, x = ± e^3t (e^(3k1)/2) ± 2/3 e^(-5t) (e^(-5k2))
Multiplying equation (4) by 5 and equation (6) by 3, we get:
15x - 5y = ± 20e^3 e^3t e^3(k1) ----- (9)
9y - 15x = ± 24e^(-5) e^(-5t) e^(-5k2) ------------ (10)
Adding equations (9) and (10),
-10y = ± 20e^3 e^3t e^3(k1) ± 24e^(-5) e^(-5t) e^(-5k2)
Therefore, y = ± 2e^3t (e^(3k1)/2) ± 12/5 e^(-5t) (e^(-5k2))
Thus, the general solution of the given linear system of differential equations is,
x = ± e^3t (e^(3k1)/2) ± 2/3 e^(-5t) (e^(-5k2))
y = ± 2e^3t (e^(3k1)/2) ± 12/5 e^(-5t) (e^(-5k2))
Now, using the given initial conditions x(0) = 1, y(0) = -1,
we have,1 = ± (e^(3k1)/2) + 2/3 (-1)
= ± (e^(3k1)/2) + 12/5
Solving the above two equations simultaneously, we get,
k1 = ln(4/3),
k2 = -ln(5/3)
Hence, the particular solution of the given linear system of differential equations with the given initial conditions x(0) = 1,
y(0) = -1 is,
x = (2/3) e^(-5t) + (2/3) e^(3t)
y = (8/5) e^(-5t) - (4/5) e^(3t)
To learn more about Linear visit;
https://brainly.com/question/31510530
#SPJ11
