luke earned a score of 850 on exam a that had a mean of 750 and a standard deviation of 50. he is about to take exam b that has a mean of 38 and a standard deviation of 5. how well must luke score on exam b in order to do equivalently well as he did on exam a? assume that scores on each exam are normally distributed.

The missing dimension of the bigger rectangle is 92 cm.

Given that two similar rectangles, bigger with the dimension 212 cm and x cm and the smaller with 106 cm and 46 cm,

We need to find the value of x,

we know that the ratio of corresponding sides of similar objects are equal.

So,

106 / 46 = 212 / x

212 × 46 / 106 = x

x = 92

Hence, the missing dimension of the bigger rectangle is 92 cm.

Learn more about similarity, click;

https://brainly.com/question/26451866

#SPJ1

Angle DEI is equal to the sum of angles DEF and EIG. therefore, the measure of DEI is  136°. The theorem used to solve this problem is the Angle Addition Postulate.

Based on the given information, we can determine the measure of angle EIG and angle EIH as follows:

Since IG ⊥ EG, we know that angle EIG is a right angle. Therefore, angle DEI is equal to the sum of angles DEF and EIG:

∠DEI = ∠DEF + ∠EIG = 46° + 90° = 136°

Similarly, since IH ⊥ EH, we know that angle EIH is a right angle.

The theorem used to solve this problem is the Angle Addition Postulate, which states that the measure of an angle formed by two adjacent angles is equal to the sum of the measures of the two adjacent angles.

for such more question on Angle Addition Postulate

https://brainly.com/question/17920323

#SPJ11

A triangle's circumcenter is where the perpendicular bisectors of its sides meet. The line that cuts through the middle of a side and is perpendicular to it is known as the perpendicular bisector of the side.

The circumcenter, which is sometimes represented by the letter O, is situated at the point where the three perpendicular bisectors intersect. The circumcenter of a triangle is the center of the circle that passes through all three vertices of the triangle. Therefore, the circumcenter is equidistant from the three vertices of the triangle, and its distance from each vertex is equal to the radius of the circumcircle.

Learn more about circumcenter

https://brainly.com/question/28912364

#SPJ4

Answer:

The coordinates of the vertices of the original triangle are (-4, 2), (2, 4), and

(-2, -2).

To obtain the new triangle, subtract 2 from each x-coordinate, and subtract 4 from each y-coordinate. So the coordinates of the vertices of the new triangle are (-6, -2), (0, 0) and (-4, -6). Draw the new triangle.

Answer: 24

Step-by-step explanation:

Let x be the number of newspapers he derlivered on Tuesday.

3.5x+30=114

Then

3.5x=114-30=84

x=24

the probability that exactly 10 out of 10 eighty-year-olds will die in the next year is approximately 0.0000000031795, which is closest to option (e).

The number of deaths in a group of 80-year-olds follows a binomial distribution with parameters n = 10 and p = 0.27. The probability mass function of this distribution is given by:

P(X = k) = (n choose k) * p^k * (1-p)^(n-k)

where X is the random variable denoting the number of deaths, k is the number of deaths, (n choose k) is the binomial coefficient "n choose k" which represents the number of ways to choose k items out of n without order and is given by:

(n choose k) = n! / (k! * (n-k)!)

where ! denotes the factorial operation.

Substituting n = 10 and p = 0.27, we get:

P(X = 10) = (10 choose 10) * 0.27^10 * (1-0.27)^(10-10) = 0.0000000031795

To learn more about binomial visit:

brainly.com/question/13870395

#SPJ11

The friend's thinking is incorrect, and the probability of the next flip being tails is still 50%.

There is no law of averages for the short run.

The first five flips do not affect the sixth flip. C

Each flip of a coin is an independent event, meaning the outcome of one flip does not affect the outcome of the next flip.

The fact that the friend has flipped five heads in a row does not increase or decrease the probability of the next flip being heads or tails.

The probability of getting heads or tails on any given flip is always 50%, regardless of the outcomes of previous flips.

This is known as the "law of large numbers," which states that the long-run frequency of an event will approach its theoretical probability as the number of trials increases.

The short run, anything can happen, and streaks or patterns can occur by chance.

The outcome of one coin flip does not influence the outcome of the subsequent flips since each coin flip is a separate event.

The likelihood that the following flip will result in heads or tails is unaffected by the friend flipping five consecutive heads.

Regardless of the results of prior flips, there is always a 50% chance of receiving heads or tails on every current flip.

This is known as the "l

aw of large numbers," which holds that as the number of trials rises, the long-run frequency of an occurrence will approach its theoretical probability.

In the near term, anything is possible, and streaks or patterns might arise by accident.

For similar questions on tails

https://brainly.com/question/27162317

#SPJ11

The speed of the man in the question is: 6 km/hr

The formula to find the average speed when given distance and time is expressed as:

Average Speed = Distance/Time

Let the speed of the man be x.

At this speed(X), the total time he takes to travel 108km is 108/X.

Now, If he had travelled 2km/hour faster, his speed would have been X + 2 km/hour.

At this speed, he could have arrived at the destination 4.5 hours earlier.

This means that the time taken to travel would have been (108/x) - 4.5 hours if his speed had been (X + 2) km/hour.

So, according to the question, we have:

(108/X) - 4.5 = 108/ (X + 2) ----------- (1)

Solving this equation, we get X = 6 or -4. So, his speed is 6km/hour.

Read more about speed at: https://brainly.com/question/4931057

#SPJ1

Sure, I can help you with that. To start with, let's rewrite the given equation x" – 12x + 3x³ = 0 as a system of first-order equations in x and y=x'. To do this, we can let y = x' and rewrite the equation as:

x' = y
y' = 12x - 3x³

This is a system of two first-order differential equations, where x and y are the variables. Now, to find the critical points of this system, we need to solve for x and y when y' = 0. Substituting y = x' in the second equation, we get:

12x - 3x³ = 0
=> 3x(4-x²) = 0

Therefore, the critical points are (0,0), (2,0), and (-2,0), in order of increasing x coordinate. We can write them as:

(x,y) = (0,0), (2,0), (-2,0)

These critical points represent the equilibrium solutions of the system, where the motion of the spring is stationary. In the next three problems, we may need to analyze the stability of these solutions and their behavior under small perturbations.

Now, we have a system of first-order equations:
x' = y
y' = 12x - 3x^3

To find the critical points, we need to solve for x and y when x' = 0 and y' = 0:

1. 0 = y
2. 0 = 12x - 3x^3

From the first equation, y = 0. To solve the second equation for x:

0 = 12x - 3x^3
0 = 3x(4 - x^2)

This gives us three possible x coordinates: x = 0, x = 2, and x = -2.

So, the critical points are:
(x, y) = (-2, 0), (0, 0), (2, 0)

To know more about equation click here

brainly.com/question/649785

#SPJ11

The triangle with side lengths a=3 cm, b=√12.96 cm, and c=4 cm can be classified as a scalene triangle, as all three sides have different lengths.

To classify the triangle based on its side lengths, we need to compare the lengths of the three sides. In this case, side a has a length of 3 cm, side b has a length of √12.96 cm, and side c has a length of 4 cm.

A scalene triangle is a triangle in which all three sides have different lengths. In this scenario, since the lengths of sides a, b, and c are different, the triangle can be classified as a scalene triangle.

It is important to note that the triangle's angles can also be used to classify triangles. However, since only the side lengths are provided in this question, we can determine the triangle's classification based solely on the side lengths, which leads us to conclude that it is a scalene triangle.

to learn more about scalene triangle click here:

brainly.com/question/30765574

#SPJ11

The total number of hands with a full house of aces and fives is 36 * 10 = 360.

(a) To find the number of hands with only black cards:
Step 1: There are 26 black cards in a standard 52-card deck (13 spades and 13 clubs).
Step 2: We need to choose 5 black cards from the 26 available.
Step 3: Use the combination formula: C(n, k) = n! / (k!(n-k)!) where n is the total number of items and k is the number of items we want to choose.
Step 4: Calculate C(26, 5) = 26! / (5!(26-5)!) = 26! / (5!21!) = 65,780.

Answer (a): There are 65,780 hands with only black cards.

(b) To find the number of hands with a full house of aces and fives:
Step 1: There are 4 aces and 4 fives in a standard 52-card deck.
Step 2: Choose 3 aces from the 4 available (C(4, 3)).
Step 3: Choose 2 fives from the 4 available (C(4, 2)).
Step 4: Multiply the combinations from steps 2 and 3: C(4, 3) * C(4, 2).
Step 5: Calculate C(4, 3) = 4! / (3!(4-3)!) = 4.
Step 6: Calculate C(4, 2) = 4! / (2!(4-2)!) = 6.
Step 7: Multiply the results from steps 5 and 6: 4 * 6 = 24.

Answer (b): There are 24 hands with a full house of aces and fives.

to learn more about number click here:

brainly.com/question/30752681

#SPJ11

A paired t-test is most appropriate for testing whether the final exam scores for a group of students are significantly higher than their midterm exam scores.

This is because the paired t-test is used to compare the means of two related samples, which is appropriate when the same group of individuals is tested twice, such as in this case where the final exam scores and midterm exam scores are from the same group of students.

The one-tailed t-test assuming equal variance and the two-tailed t-test assuming equal variance are used when comparing the means of two independent samples, while the one-tailed paired t-test is used when there is a directional hypothesis (e.g. the final exam scores will be higher than the midterm exam scores).

Learn more about T-Test here:- brainly.com/question/6589776

#SPJ11

If Maria purchased 1000 shares at rate of $35.50 per-share, and sold them for $55.10 per-share, then the capital gain in percent form is 55.5%.

To calculate Maria's "capital-gain", we need to find the difference between the selling price and the purchase price, and then divide that difference by the purchase price.

The "purchase-price" for one share is  = $35.50,

So, total purchase price for 1000 shares is = 1000 × 35.50 = 35500,

The "selling-price" for one share is = $55.10,

So, total selling price for 1000 shares is = 55.10 × 1000 = 55100,

Maria's capital gain is : $55100 - $35500 = $19600,

Maria's capital gain in percent form is : ($19600/$35500) × 100 ≈ 55.5%

Therefore, Maria's capital gain is 55.5%.

Learn more about Capital Gain here

https://brainly.com/question/14119263

#SPJ1

Answer:

[tex]y = ln(2) [/tex]

[tex] {e}^{y} = 2[/tex]

Given:-

[tex] \: [/tex]

Solution:-

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

━━━━━━━━━━━━━━━━━━━━━━━

hope it helps ☘️

The volume of the region E is (16/15)π.

What is volume?

A volume is simply defined as the amount of space occupied by any three-dimensional solid. These solids can be a cube, a cuboid, a cone, a cylinder, or a sphere. Different shapes have different volumes.

In cylindrical coordinates, the equations of the sphere and the paraboloid become:

x² + y² + z² = 2 => r² + z² = 2

z = x² + y² => z = r²

We want to find the volume of the region E that is bounded above by the sphere and bounded below by the paraboloid.

This region is a solid with circular cross-sections, so we can use cylindrical coordinates to set up the integral.

The limits of integration for r, θ, and z are as follows:

r: The solid is circular in cross section, so r goes from 0 to the radius of the circle.

This radius is determined by setting the equation of the sphere equal to the equation of the paraboloid and solving for r.

This gives us r = 1.

θ: Since the solid is symmetric about the z-axis, θ goes from 0 to 2π.

z: The solid is bounded below by the paraboloid, which gives us the lower limit of integration for z.

The upper limit of integration is given by the equation of the sphere.

Using these limits, we can set up the triple integral:

V = ∫∫∫ E dV

where dV = r dz dr dθ.

The limits of integration for this integral are:

0 ≤ r ≤ 1

0 ≤ θ ≤ 2π

r² ≤ z ≤ √(2 - r²)

Substituting in the limits and integrating, we get:

V = ∫0¹ ∫0²π ∫r² √(2-r²) r dz dr dθ

= ∫0¹ ∫0²π [(1/2)√(2-r²) - (1/2)r⁴] dr dθ

= ∫0¹ ∫0²π (1/2)√(2-r²) dr dθ - ∫0¹ ∫0²π (1/2)r⁴ dr dθ

The first integral can be evaluated using the substitution u = 2 - r², du = -2r dr, and the limits 0 to √2:

∫0¹ ∫0²π (1/2)√(2-r²) dr dθ = ∫0²π ∫0²-θ (1/2)√u (-du/2) dθ du

[tex]= \int\limits { 0^2 \pi (1/3)(2-u)^{(3/2)} du[/tex]

= (4/3)π

The second integral can be evaluated using the power rule for integration, and the limits 0 to 1:

∫0¹ ∫0²π (1/2)r⁴ dr dθ = (1/2) ∫0²π [(1/5)r⁵]_0₁ dθ

= (1/2) ∫0²π (1/5) dθ = π/5

Therefore, the volume of the region E is:

V = (4/3)π - π/5 = (16/15)π

Thus, the volume of the region E is (16/15)π.

To know more about volume visit:

https://brainly.com/question/463363

#SPJ4

The quotient of 2.408×10²⁴ divided by 6.02×10²³ is 4.

In mathematics, division is a basic arithmetic operation that involves splitting a number into equal parts. The result of a division is called the quotient.

Now, let's talk about your specific problem. You have been asked to find the quotient of two numbers, 2.408×10²⁴ and 6.02×10²³.

To solve this problem, we need to perform a division operation between these two numbers.

Dividing the first number by the second number gives us:

(2.408×10²⁴) / (6.02×10²³)

We can simplify this expression by dividing the numbers outside of the exponential notation and subtracting the exponents:

(2.408 / 6.02) × 10²³ ⁻ ²⁴

This simplifies to:

0.4 × 10¹

Which, in turn, simplifies to:

4

To know more about quotient here

https://brainly.com/question/16134410

#SPJ4

The right unit multipliers is A, 24 ft²/1 min . 12 in/1 ft . 12 in/1 ft . 1 min/60 sec.

The correct choice is:

24 ft²/1 min . 12 in/1 ft . 12 in/1 ft . 1 min/60 sec.

This correctly uses unit multipliers to convert 24 square feet per minute to square inches per second.

To convert from square feet to square inches, multiply by the conversion factor (12 inches per 1 foot) twice because of dealing with area.

To convert from minutes to seconds, multiply by the conversion factor (1 minute per 60 seconds).

So, when multiplied these conversion factors together with the given value of 24 ft²/1 min:

24 ft²/1 min . 12 in/1 ft . 12 in/1 ft . 1 min/60 sec

= (24 x 12 x 12) in² / (1 x 1 x 1) min x (1 x 1 x 60) sec

= 4,608 in²/sec

Therefore, the answer is 24 ft²/1 min . 12 in/1 ft . 12 in/1 ft . 1 min/60 sec.

Find out more on unit multipliers here: https://brainly.com/question/13736702

#SPJ1

We are 99% confident that the true difference in population proportions of people in the eastern half of the country who fly to visit family members for the winter holidays and people in the western half of the country who fly to visit family members for the winter holidays is somewhere between -0.422 and -0.114.

Next, we need to calculate the standard error of the difference in sample proportions. This gives us an idea of how much the sample difference in proportions can be expected to vary from the true population difference in proportions. We use the following formula to calculate the standard error:

√((p₁(1-p₁)/n₁)+(p₂(1-p₂)/n₂))

where p₁ and p₂ are the sample proportions, and n₁ and n₂ are the sample sizes. Plugging in the values we have, we get a standard error of 0.094.

Now that we have the sample proportions and the standard error, we can use a confidence interval formula to calculate the range of values that we can be confident contains the true population difference in proportions. For a 99% confidence interval, the formula is:

(sample proportion 1 - sample proportion 2) +/- (critical value x standard error)

The critical value is obtained from a t-distribution table, with degrees of freedom equal to the smaller of (n1-1) and (n2-1). For a 99% confidence level and 44 degrees of freedom, the critical value is 2.689.

Plugging in the values we have, we get a confidence interval of:

0.438 - 0.75 +/- 2.689 x 0.094

= -0.422 to -0.114

To know more about confidence interval here

https://brainly.com/question/24131141

#SPJ4

Based on the provided information, if a test of the hypotheses H0: p = .25 versus Ha: p > .25 provides a p-value of 0.11, we can conclude that there is not enough evidence to reject the null hypothesis at a significance level of .05.

since the p-value is greater than the level of significance. However, we cannot completely rule out the possibility of a true difference existing between the sample proportion and the hypothesized proportion, as the p-value is not very small.

Based on the provided information, you conducted a hypothesis test with the null hypothesis (H0) stating that the proportion (p) is equal to 0.25, and the alternative hypothesis (Ha) stating that the proportion (p) is greater than 0.25. The test resulted in a p-value of 0.11.

To determine whether to accept or reject the null hypothesis, you'll need to compare the p-value to a predetermined significance level (alpha). If the p-value is less than or equal to alpha, you would reject the null hypothesis in favor of the alternative hypothesis. If the p-value is greater than alpha, you would fail to reject the null hypothesis.

Without a specified significance level, it's not possible to make a definitive conclusion. However, if using a common alpha level of 0.05, you would fail to reject the null hypothesis since the p-value (0.11) is greater than alpha (0.05).

Visit here to learn more about  null hypothesis : https://brainly.com/question/19263925
#SPJ11

The integral of √(2x+1)dx over [0,2] is equivalent to (1/3) (5√(5) - 1).

What is integration?

Integration is a mathematical operation that is the reverse of differentiation. Integration involves finding an antiderivative or indefinite integral of a function.

To use the substitution u = 2x + 1, we need to express dx in terms of du. We can differentiate both sides of the substitution equation with respect to x:

du/dx = 2

Solving for dx, we get:

dx = du/2

We can use this to rewrite the integral:

∫(0 to 2) √(2x + 1) dx

= ∫(u(0) to u(2)) √(u) (du/2)

where u(0) = 2(0) + 1 = 1 and u(2) = 2(2) + 1 = 5.

= (1/2) ∫(1 to 5) √(u) du

We can now integrate with respect to u:

= (1/3) [(5√(5) - √(1))] from 1 to 5

= (1/3) (5√(5) - 1)

Therefore, the integral of √(2x+1)dx over [0,2] is equivalent to (1/3) (5√(5) - 1).

To learn more about integration from the given link:

brainly.com/question/18125359

#SPJ4

Simple regression modeling is a statistical technique that develops a mathematical equation to describe the relationship between two variables. Given the amount of the other variable, it is used to forecast the value of the first variable.

Simple regression modeling is a statistical framework used to develop a mathematical equation that describes how one variable is related to another variable. It involves identifying a dependent variable and an independent variable, and then estimating the relationship between them using statistical methods.Inferring the value for the dependent variable from the value of the variable that is independent can be done using the resultant equation.Simple regression models are often used in fields such as economics, finance, and social sciences to analyze the relationship between two variables and make predictions about future outcomes.

To know more about variable visit

https://brainly.com/question/29583350

#SPJ4

To find the change in population of insects between day 0 and day 3, we need to calculate the population at both times and subtract them.

Using the given rate equation, we can calculate the population at day 0 and day 3 as follows:
At day 0 (t=0):
Population = 200(10^0) + 13(0^2) = 200
At day 3 (t=3):
Population = 200(10^3) + 13(3^2) = 20,130
Therefore, the change in population between day 0 and day 3 is:
20,130 - 200 = 19,930
So the population of insects increased by 19,930 between day 0 and day 3.

To find the change in the population of insects between day 0 and day 3 with the given rate of 200 + 10t + 13t^2, follow these steps:
1. Plug in t = 0 (day 0) into the rate equation: 200 + 10(0) + 13(0)^2 = 200
2. Plug in t = 3 (day 3) into the rate equation: 200 + 10(3) + 13(3)^2 = 200 + 30 + 117 = 347
3. Subtract the day 0 population from the day 3 population: 347 - 200 = 147
The change in the population of insects between day 0 and day 3 is 147.

Visit here to learn more about rate equation:

brainly.com/question/16981791

#SPJ11

Answer:

Let x be the current page number.

If the sum of the two next pages is 101, we can set up the following equation:

x + (x+1) = 101

Simplifying this equation, we get:

2x + 1 = 101

Subtracting 1 from both sides, we get:

2x = 100

Dividing both sides by 2, we get:

x = 50

Therefore, the current page number is 50, and the next page number is 51.

a) The slope of the regression equation: 1.6172

b) The equation of the line of best fit that can be used to predict bean heights is: height = (1.6172 x width) + 2.3349

c) The fraction of the variability in bean heights = 0.7484

d) If the students use the height of the beans to predict the width then the slope =  0.4628

e) The equation of the line of best fit that can be used to predict bean widths is: width = (0.4628 × height) - 16.0299

Here, the summary statistics of a random sample of beans are:

Mean width:  7.586

Stdev width:  0.873

Mean height:  14.603

Stdev height:  1.632

Correlation coefficient:  0.8651

Let us assume that  x represents the width and y represents the height. a) First we find the slope.

slope = r × Sy/Sx

where Sx is the Stdev width and Sy is the Stdev height.

So, slope = (0.8651) × (1.632/0.873)

                =  1.6172

b) First we find the intercept.

intercept = ( [tex]\bar{y}[/tex] - slope × [tex]\bar{x}[/tex])

where [tex]\bar{y}[/tex] = mean height and [tex]\bar{x}[/tex] = mean width

intercept = ( 14.603 - (1.6172)× (7.586))

intercept = 2.3349

So, the equation of the line of best fit that can be used to predict bean heights would be,

y = (1.6172)x + 2.3349

i.e., height = (1.6172 x width) + 2.3349

c) Now we find the fraction of the variability in bean heights can be explained by the linear model of bean height vs. width:

r²

= (0.8651)²

= 0.7484

d) Now let us assume that  x represents the height and y represents the width.

Then the slope would be,

slope = r × Sy/Sx

where Sx is the Stdev height and Sy is the Stdev width.

So, slope = (0.8651) × (0.873/1.632)

                = 0.4628

e) Now we find the intercept.

intercept = ( [tex]\bar{y}[/tex] - slope × [tex]\bar{x}[/tex])

where [tex]\bar{y}[/tex] = mean width and [tex]\bar{x}[/tex] = mean height

intercept = (7.586 - (1.6172)× (14.603))

intercept = -16.0299

Thus the equation of the line of best fit that can be used to predict bean widths.

width = (0.4628 × height) - 16.0299

Learn more about the regression equation here:

https://brainly.com/question/30742796

#SPJ4

Find the complete question below.

Required value of g'(3) is (-1/4).

We can start by using the formula for the derivative of the inverse function:

[tex](g⁻¹)'(x) = 1 / f'(g⁻¹(x))[/tex]

We want to find [tex]g'(3)[/tex], which is the derivative of g at [tex]x = 3[/tex].

Since [tex]g(x) = f⁻¹(x)[/tex], we have

[tex]g(15) = 3 \: and \: g(3) = 6[/tex]

Therefore, we can find [tex]g⁻¹(3) = 6 \: and \: g⁻¹(15) = 3.[/tex]

Now we can use the formula above with

[tex]x = 3 \: and \: g⁻¹(x) = 6[/tex]:[tex](g⁻¹)'(3) = 1 / f'(g⁻¹(3)) = 1 / f'(6)[/tex]

To find f'(6), we can use the given information:

[tex]f'(3) = -8 \: and \: f'(6) = -2[/tex]

We can use these values to estimate the average rate of change of f between [tex]x = 3 \: and \: x = 6:[/tex] average rate of change of [tex]f = (f(6) - f(3)) / (6 - 3) = (3 - 15) / 3 = -4[/tex]

Since f is differentiable, the instantaneous rate of change (i.e., the derivative) must be close to this average rate of change near x = 6. Therefore, we can estimate that f'(6) ≈ -4.

Using this estimate, we can find g'(3):

(g⁻¹)'(3) = 1 / f'(6) ≈ -1/4

Therefore, the value of g'(3) ≈ -1/4.

Learn more about function here,

https://brainly.com/question/24044938

#SPJ4

The nitrogen level that gives the best yield function is where the optimal nitrogen level is 6 units.

To find the nitrogen level that gives the best yield, we need to find the maximum value of the yield function Y. To do this, we can take the derivative of Y with respect to N, set it equal to zero, and solve for N.

dy/dN = k(36 - N²)/(36 + N²)²

Setting dy/dN equal to zero, we get:

0 = k(36 - N²)/(36 + N²)²

Solving for N, we get:

N = ±6

Since N has to be a positive value, the optimal nitrogen level is N = 6 units.

Learn more about functions:

https://brainly.com/question/28628175

#SPJ4

a. The congruent angles to angle 1 are given as follows: <7, <3 and <5.

b. The supplementary angles to angle 1 are given as follows: <2, <8, <4 and <6.

Two angles are classified as congruent when they have the same angle measure.

Hence the congruent angles to angle 1 are given as follows:

Two angles are called supplementary when the sum of their measures is of 180º, hence the supplementary angles to angle 1 are given as follows:

More can be learned about angle measures at https://brainly.com/question/25716982

#SPJ1

For the principal $400 is invested at an interest rate of 4.5% per year, the final amount of the investment at the end of 14 years compounded interest

a) $750

b) $746.

c) $748.

d) $751.

We know that in compound interest, interest is calculated in different methods. We will use the following formula: [tex]A=P(1 + \frac{r}{n})^{nt}[/tex]

To calculate the final amount continuously, we will use the following formula, [tex]A = Pe ^{rt}[/tex]

Where, P = the initial amount.

Now, we have Initial invested amount, P= $400

Rate of interest, r = 4.5 % = 0.045

Time, t = 14 years.

Let us assume that the final amount will be equal to A.

a) When the interest is compounded annually then the number of times interest is calculated in a year is, n = 12

By using the formula of compound interest, we have: [tex]A=400(1+ \frac{0.045}{12})¹⁴[/tex] ≈750

b.) When the interest is compounded semiannually then the number of times interest is calculated in a year is, n = 2

By using the formula of compound interest, [tex]A= 400(1 + \frac{0.045}{2})²⁸[/tex] ≈746.

c) When the interest is compounded quarterly then the number of times interest is calculated in a year is, n = 4

By using the formula of compound interest,[tex]A = 400(1 + \frac{0.045}{4})⁵⁶[/tex] ≈748.

d) When the interest is compounded continuously then we will use continuous compound interest formula. By using the formula of continuous compound interest, [tex]A= 400e^{0.045×14 }[/tex]≈ 751. Hence, required value is 751.

To learn more information about compound interest, visit :

https://brainly.com/question/24274034

#SPJ4