Malic Acid is found in?
Hydrochloric Acid is found in?
Potassium Hydroxide is found in?
Sodium Hydroxide is found in?​

The structure of Arg-Ile-Tyr is given below:

Peptides make up short chains of amino acids, which act as the fundamental units for building proteins. Within these chains, peptides usually consist of no more than 50 amino acids in contrast to proteins that are made up of significantly longer structures.

Found throughout various sources such as plants, animals, and bacteria, peptides play crucial roles in multiple biological processes including signaling, enzyme activity, and immune response.

Additionally, artificially synthesized peptides serve several purposes within the medicine, cosmetics, and food industries. Scientists are also exploring certain peptide's potential therapeutic advantages mainly pertaining to anti-inflammatory, antimicrobial, and anticancer activities.

Read more about peptides here:

https://brainly.com/question/21884818

#SPJ1

The ∆H of solution of NaOH is 46.8 kJ/mol.

First, we need to calculate the amount of heat absorbed by the solution:

q = m × c × ∆T

where q is the heat absorbed (in Joules), m is the mass of the solution (in grams), c is the specific heat capacity of the solution (in J/(g °C)), and ∆T is the change in temperature (in °C).

In this case, the mass of the solution is the sum of the mass of NaOH and the mass of water:

m = 7.59 g + 80.0 g = 87.59 g

The change in temperature is:

∆T = 48.0 °C - 25.0 °C = 23.0 °C

Substituting the values, we get:

q = 87.59 g × 4.184 J/(g °C) × 23.0 °C = 8,878 J

Next, we need to convert the heat absorbed into the enthalpy change of solution (∆H). The enthalpy change of solution is the heat absorbed per mole of solute. The number of moles of NaOH is:

n = m/M

where M is the molar mass of NaOH, which is 40.00 g/mol.

n = 7.59 g / 40.00 g/mol = 0.1898 mol

Therefore, the enthalpy change of solution is:

∆H = q/n = 8,878 J / 0.1898 mol = 46,780 J/mol = 46.78 kJ/mol

The H of a NaOH solution, rounded to three significant numbers, is 46.8 kJ/mol.

To know more about the Temperature, here

https://brainly.com/question/30411639

#SPJ1

The molarity of 150 mL solution containing 5g of copper (1) chlorate is 0.0051 M

We'll begin by obtaining the number of mole in 5 g of copper (i) chlorate. This is shown below:

Mole = mass / molar mass

Mole of copper (i) chlorate = 5 / 147

Mole of copper (i) chlorate = 0.034 mole

Now, we shall determine the molarity of the solution. Details below:

Molarity of solution = mole / volume

Molarity of solution = 0.034 / 0.15

Molarity of solution = 0.0051 M

Learn more about molarity:

https://brainly.com/question/16073358

#SPJ1

Explanation:

The energy of a single photon can be calculated using the equation E = hc/λ, where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 J.s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength of the photon.

To dissociate one mole of Cl2 molecules, we need 239 kJ of energy. This corresponds to 239,000 J/mol of Cl2.

Now we can use the relationship between energy and the number of photons absorbed: E = Nhf, where N is the number of photons absorbed, h is Planck's constant, and f is the frequency of the absorbed photons.

We can relate the frequency of the absorbed photon to its wavelength using c = λf. Solving for f gives f = c/λ.

Combining these equations, we get E = Nh(c/λ), or N = E/(hc/λ). Substituting the value of E for the energy required to dissociate one mole of Cl2, we get:

N = (239,000 J/mol) / [(6.626 x 10^-34 J.s) x (2.998 x 10^8 m/s) / λ]

Solving for λ, we get:

λ = hc / (239,000 J/mol) = (6.626 x 10^-34 J.s x 2.998 x 10^8 m/s) / 239,000 J/mol

λ = 8.44 x 10^-7 m

Therefore, the wavelength of the photon required to dissociate one Cl2 molecule is approximately 8.44 x 10^-7 meters (or 844 nanometers).

When a 200°C iron bar is placed in thermal contact with a 30°C block of wood, energy leaves the iron bar and enters the wood until the temperatures are equal.

Law of conservation of energy states that the energy cannot be lost or formed but it can only be transformed from one form to another.

According to the given question, the block of wood is at a lower temperature than an iron bar. Hence, heat will flow from the iron bar to the block of wood until the temperatures of both are equal.

Know more about the Law of conservation of energy,

https://brainly.com/question/24772394

https://brainly.com/question/11549071

Answer:

The increase in human population has impacted Earth's resources in several major ways:

• Increased demand for food, water, and shelter. A larger population requires massive increases in food, water, and living spaces which strains natural resources and infrastructure. Producing enough food alone is a significant challenge.

• Accelerated consumption of resources. As population grows, the use of resources like forests, minerals, fossil fuels also increases rapidly to meet demands. This accelerated depletion of resources threatens long term sustainability.

• Increased pollution. A bigger population produces more pollution, waste, emissions, and environmental degradation as a byproduct of energy usage, transportation, industrialization, and land/resource use. This pollution harms ecosystems and contaminates the air, water and land.

• Biodiversity loss. As natural habitats are destroyed or fragmented to enable more human use, many plant and animal species lose their homes and face a higher risk of extinction. Tropical rainforests, in particular, have been heavily impacted.

• Inequality. While resources are limited, population growth often exacerbates inequality in access to and distribution of resources. Poor or developing regions typically have the highest populations but fewest resources per capita.

• Migration and conflict. Shortages of resources in certain areas or regions may lead to migration, economic troubles, social unrest, and in some cases even resource conflicts or wars.

• Slower development. Extremely rapid population growth rates make it difficult for governments, organizations and societies to effectively manage development, improve standards of living, advance technology, and make other progress at an optimal pace. Slower, more stabilized population growth may enable a higher overall quality of life.

So in many profound and troubling ways, increased population size has created immense pressures on Earth's resources and made it more difficult to meet present and future needs in a sustainable manner. Most experts agree that slowing population growth is critical to ensuring resource security for future generations.

Explanation:

Answer: A.) It is a compound

Explanation:

Water is an inorganic compound made of water molecules, which are made of oxygen and hydrogen atoms.

It is not an element because there is no such thing as a water atom.

Water is not a chemical reaction to anything.

Water is OBVIOUSLY not a metal.

Hope this helps :)

Answer:

cannot be measure

Hope this helps :) !!!

The negative sign indicates that heat is being released from the ethanol as it cools down. So, 3,950.4 joules of heat are released when 60g of ethanol cools from 70°C to 43°C.

To calculate heat released when 60g of ethanol cools from 70°C to 43°C, we can use the following equation:

Q = m × c × ΔT

First, we need to calculate the change in temperature:

ΔT = final temperature - initial temperature

ΔT = 43°C - 70°C

ΔT = -27°C

Note that the change in temperature is negative because the ethanol is cooling down.

Next, we can calculate the heat released:

Q = m × c × ΔT

Q = 60g × 2.44 J/g°C × (-27°C)

Q = -3,950.4 J

To know more about heat released, here

brainly.com/question/26550984

#SPJ1

If a mixture of gases reaches equilibrium with 0.0113M of H² and CO², the equilibrium concentration of the product is 0.0113 M. Hence, option A is correct.

The equilibrium constant, Keq, is given as:

[tex]\rm K_{eq} = \dfrac{[CO][H_2O]}{ [H_2][CO_2]} \\ \\[/tex]

= 0.16

At equilibrium, let the concentrations of CO, H₂O, and H₂, CO₂  be [CO], [H₂O], [H₂], and [CO₂].

Initial concentration of H₂ and CO₂ = 0.0113

Change in concentration = +X and -X

At equilibrium, for CO = 0-X, H₂O = X,H₂O = 0.0113-X and CO₂=0.0113-X

x² = 0.001207

x = 0.0348 M

Therefore, the equilibrium concentrations of the products are:

[CO] = 0 - x = -0.0348 M

[H₂O] = x = 0.0348 M

[H₂] = 0.0113 - x = 0.0113 - 0.0348 = 0.0225 M

[CO₂] = 0.0113 - x = 0.0113 - 0.0348 = 0.0225 M

Since [CO] is negative, we can conclude that the equilibrium lies to the left, indicating that the reactants are favored over the products.

To learn more about an equilibrium constant, follow the link:

https://brainly.com/question/10038290

#SPJ1

Greater than 0 is the change in entropy (AS) when a solid substance decomposes and produces gaseous products. The correct option is B.

The change in entropy (ΔS) is a measure of the degree of randomness or disorder in a system. When a solid substance decomposes and produces gaseous products, the number of particles (molecules or atoms) in the system increases, and the arrangement of the particles becomes more disordered. This results in an increase in entropy, which is greater than 0.

When a solid substance decomposes and produces gaseous products, the change in entropy (ΔS) is greater than 0. This is because the number of particles in the system increases, leading to an increase in disorder or randomness.

The entropy of a system is a measure of the degree of disorder, and it tends to increase in processes that lead to a greater dispersion of energy or matter. In the case of the decomposition of a solid substance into gaseous products, the transition from a more ordered solid state to a more disordered gas state leads to an increase in entropy.

This phenomenon is a manifestation of the second law of thermodynamics, which states that the entropy of a closed system tends to increase over time.

For more question on entropy click on

https://brainly.com/question/30481619

#SPJ11

The uncertainty in the baseball's position is approximately 6.97 × 10⁻³⁶ m.

Using the uncertainty principle, ∆x∆p ≥ h/4π, we can solve for the uncertainty in position:

∆x ≥ h/4π∆p

First, we need to convert the velocity from mph to m/s:

100 mph = 44.7 m/s

Next, we need to convert the momentum from kg · m/s to kg · m/s²:

7.7 kg · m/s = 7.7 N · s

Now we can solve for the uncertainty in position:

∆x ≥ h/4π∆p = (6.626 × 10⁻³⁴ J · s)/(4π × 7.7 N · s)

                     = 6.97 × 10⁻³⁶ m

As a result, the uncertainty in baseball's location is around 6.97 × 10⁻³⁶ m. This value is incredibly small and practically impossible to measure, indicating that the uncertainty in measuring the mass has no significant effect on the uncertainty in position.

To know more about the Momentum, here

https://brainly.com/question/15237527

#SPJ1

The mass (in grams) of magnesium sulfate, MgSO₄ that would be produced from the reaction is 87.76 g

The mass of magnesium sulfate, MgSO₄ produced can be obtain as illustrated below:

Al₂(SO₄)₃ + 3Mg -> 2Al + 3MgSO₄ ΔH = +722 KJ

From the balanced equation above,

When 722 KJ of heat were absorbed, 360 g of MgSO₄ were produced

Therefore,

When 176 KJ of heat is absorbed = (176 × 360) / 722 = 87.76 g of MgSO₄ will be produce

Thus, the mass of MgSO₄ produced is 87.76 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

The acidity or alkalinity of a solution depends upon its hydronium ion concentration and hydroxide ion concentration. Here among the given options, all the aqueous solutions are considered as basic. The correct option is E.

The pH of a solution is defined as the negative logarithm to the base 10 of the activity of hydrogen ions. At 298 K, for pure water or in a neutral solution the pH is found to be 7.

For an acidic solution, the concentration of H₃O⁺ is greater than 10⁻⁷ M and the pH will be less than 7. For a basic solution, the concentration of  H₃O⁺ is  less than 10⁻⁷ M and hence the pH will be greater than 7.

Thus the correct option is E.

To know more about pH, visit;

https://brainly.com/question/27945512

#SPJ1

The peroxide addition would yield a product that is different from the antiperoxide addition

Markovnikov's rule states that when a protic acid HX is added to an alkene, the acid hydrogen (H) forms a bond with the carbon atom that has the greatest number of hydrogen atoms, while the halide (X) group forms a bond with the carbon atom that has the fewest hydrogen atoms.

This can be summed up with the phrases "the rich get richer" and "the poor get poorer" in terms of hydrogen. This fundamental principle of alkene chemistry aids in predicting the results of addition reactions.

Learn more about alkene:https://brainly.com/question/17017195

#SPJ1

The flashbulb contains approximately 0.00291 grams of O₂(g).

The ideal gas law relates the pressure (P), volume (V), temperature (T), and amount of gas (n) through the equation PV = nRT, where R is the universal gas constant. Rearranging this equation to solve for n gives n = PV/RT.

To find the amount of O₂(g) in the flashbulb, we first need to convert the volume to liters and the temperature to Kelvin:

V = 1.70 mL = 0.00170 L

T = 29.0 °C + 273.15 = 302.15 K

We can then use the ideal gas law to calculate the amount of O₂(g):

n = PV/RT

n = (2.30 atm)(0.00170 L)/(0.0821 L·atm/mol·K)(302.15 K)

n = 9.10 × 10⁻⁵ mol O₂

Finally, we can convert from moles to grams using the molar mass of O₂:

m = n × M

m = (9.10 × 10⁻⁵ mol)(32.00 g/mol)

m = 0.00291 g O₂

As a result, the flashbulb contains around 0.00291 grams of O₂(g).

To know more about the Pressure, here

https://brainly.com/question/14047938

#SPJ1

The enthalpy change for the given reaction is 1344 kJ/mol.

First, we need to write the balanced chemical equation for the given reaction:

HCN(g) + 2 H2(g) → CH3NH2(g)

To calculate the enthalpy change (ΔH) for this reaction, we need to subtract the total energy of the reactants from the total energy of the products. We can do this by calculating the energy required to break the bonds in the reactants and the energy released when new bonds are formed in the products.

Reactants:

HCN(g): 1 C-N bond (305 kJ/mol) + 1 C-H bond (413 kJ/mol) + 1 N-H bond (391 kJ/mol) = 1109 kJ/mol

2 H2(g): 4 H-H bonds (4 x 432 kJ/mol) = 1728 kJ/mol

Total energy of reactants: 1109 kJ/mol + 1728 kJ/mol = 2837 kJ/mol

Products:

CH3NH2(g): 1 C-H bond (413 kJ/mol) + 3 C-N bonds (3 x 305 kJ/mol) + 7 H-H bonds (7 x 432 kJ/mol) = 4181 kJ/mol

Total energy of products: 4181 kJ/mol

ΔH = (total energy of products) - (total energy of reactants)

ΔH = 4181 kJ/mol - 2837 kJ/mol

ΔH = 1344 kJ/mol

For more question on enthalpy change click on

https://brainly.com/question/30598312

#SPJ11

The final temperature of the mixture given that 25 g of water at 25 °C is mixed with 25 g of water at 65 °C, is 45 °C

The final temperature of the mixture can be obtained by calculating the equilibrium temperature of the mixture. This is shown below:

Heat loss by warm water = Heat gain by cold water

MᵥᵥC(Tᵥᵥ - Tₑ) = MC(Tₑ - T)

Cancel out C

Mᵥᵥ(Tᵥᵥ - Tₑ) = M(Tₑ - T)

25× (65 - Tₑ) = 25 × (Tₑ - 25)

Cancel out 25

65 - Tₑ = Tₑ - 25

Collect like terms

65 + 25 = Tₑ + Tₑ

90 = 2Tₑ

Divide both side by 2

Tₑ = 90 / 2

Tₑ = 45 °C

Thus, we can conclude that the final temperature the mixture is 45 °C

Learn more about temperature:

https://brainly.com/question/14281142

#SPJ1

The compound that is a base from the given list is Ca(OH)2. Option 2.

What is a base?

A base is a chemical substance that produces hydroxyl ions as the only negative ion in aqueous solutions.

Ca(OH)2 is calcium hydroxide, which is a chemical compound consisting of one calcium ion (Ca2+) and two hydroxide ions (OH-).

It is classified as a base because, when it dissolves in water, it produces hydroxide ions that can accept protons (H+) from acids in a process known as a neutralization reaction.

More on bases can be found here: https://brainly.com/question/31434755

#SPJ1

The balanced reaction equations are;

Na3PO4 + 3HCl → 3NaCl + H3PO4

2Al + 6HCl ----> 2AlCl3 + 3H2

2 FeC2O4 + 2 CO2---> Fe2(C2O4)3

TiCl4 + H2O → Ti(OH)4 + 4HCl

B2Br6 + 6HNO3 → 2B(NO3)3 + 6HBr

A chemical reaction equation must have an equal number of atoms for each element on both sides in order to be balanced.

Determine the total number of atoms in the reactants and products for each element. To balance the equation, pick a coefficient. This would be placed at the beginning of the chemical formula.

Learn more about equation:https://brainly.com/question/3588292

#SPJ1

The amount of energy transferred after 2 minutes is 3600 Joules.

We can use the formula for thermal energy to calculate the amount of energy transferred after 2 minutes:

Q = P * t

where Q is the thermal energy transferred (in Joules), P is the power of the heater (in Watts), and t is the time (in seconds).

We can convert the power from Watts to Joules/second:

30 W = 30 J/s

We can also convert the time from minutes to seconds:

2 minutes = 2 * 60 seconds = 120 seconds

Now we can substitute these values into the formula:

Q = P * t

Q = 30 J/s * 120 s

Q = 3600 J

Therefore, the amount of energy transferred after 2 minutes is 3600 Joules.

Learn more about Temperature at

brainly.com/question/11464844

#SPJ1

Answer:

Explanation:

3600 Joules.

Answer:

To solve this problem, we can use the definition of percent concentration by mass:

percent concentration = (mass of solute ÷ mass of solution) x 100%

We know that the percent concentration of NaCl in the solution is 15% by mass, and we have a 500 gram sample of the solution. Let's assume that the mass of NaCl in the sample is x grams.

Using the percent concentration formula, we can write:

15% = (x ÷ 500) x 100%

Simplifying this equation, we get:

x = (15 ÷ 100) x 500 = 75 grams

Therefore, there are 75 grams of NaCl in a 500 gram sample of the solution.

The correct answer is c. 75 grams.

we can determine the enthalpy of reaction for the hypothetical reaction A2X4(l) + X2(g) → 2AX3(g) using the following steps:

Hess's Law of Constant Heat Summation  states that regardless of the multiple stages or steps of a reaction, the total enthalpy change for the reaction is the sum of all changes.

The law is  Hess's Law  of Constant Heat Summation  is described as a manifestation that enthalpy is a state function.

Learn more about Hess law at:

https://brainly.com/question/9530080

#SPJ1

In order to calculate the number of grams of magnesium reacted, we must first calculate the moles of hydrogen gas produced. The ideal gas law can be used to calculate the moles of a gas, given the pressure, temperature, and volume of the gas.

The ideal gas law is PV=nRT, where P is pressure, V is volume, n is moles, R is the ideal gas constant, and T is temperature. By calculating the given values, we get 0.032L*1.1atm/24C*0.08206L*atm/mol*K=0.0077 mol.

Since 1 mole of hydrogen gas is produced for every mole of magnesium that reacts, 0.0077 moles of magnesium have reacted.

Finally, to calculate the grams of magnesium, we multiply the moles of magnesium by the molar mass of magnesium, which is 24.31 g/mol. This gives us 0.0077 mol*24.31 g/mol = 0.186 grams of magnesium.

Learn more about magnesium at :

https://brainly.com/question/1533548

#SPJ1

Answer:

UV or Gamma Rays

Explanation:

X-rays: 10^-10

UV: 10^-8

Gamma Rays: 10^-12

The experiment that will most likely be part of a good demonstration of thermal equilibrium is: D. Bringing together two objects with different temperatures.

Thermal equilibrium is a condition in which the temperature levels of two fluids or substances attain the same temperature. Let us say that a cup of ice-cold water is brought from the freezer to a warm environment.

Thermal equilibrium will be attained when there will be a transfer between the temperature condition of the cup of water and the environment. So, option D is a good example.

Learn more about thermal equilibrium here:

https://brainly.com/question/14556352

#SPJ1