Different samples of brass may melt at different temperatures due to variations in their composition. Impurities or other trace elements present in the brass can also affect the melting point.
Which metal is the easiest to melt?The metal which is easiest to melt and has a low melting point is mercury. Mercury has the lowest melting point reaching in at -39 C, while on the other hand aluminium alloys melt at 463-671 C.
What are the main uses of brass?Brass is still mainly used in applications where there is need of corrosion resistance and low friction. It is used in locks, zippers, plumbing, valves, and electrical plugs and sockets. It is used vastly in making of some musical instruments also.
To know more about metals, visit here:
https://brainly.com/question/28650063
#SPJ4
What is the mass (in kg) of 6.89 x 1025 molecules of CO2? The molar mass of CO2 is 44.01 g/mol. (Show work on scratch paper) 5.04 kg 6.39 kg 3.85 kg 3.03 kg 2.60 kg
The mass of 6.89 x 10²⁵ molecules of CO₂ will be approximately 0.5068 kg.
To find the mass in kilograms of 6.89 x 10²⁵ molecules of CO₂, you can use the formula:
mass (kg) = (number of moles) x (molar mass in g/mol) / (1000 g/kg)
First, convert the number of molecules to moles by dividing by Avogadro's number (6.02 x 10²³mol⁻¹) :
6.89 x 10²⁵ CO₂ molecules / 6.02 x 10²³mol⁻¹ = 11.46 x 10² mol
Then, use the molar mass of CO₂ (44.01 g/mol) to find the mass in grams: 11.46 x 10²mol x 44.01 g/mol = 506.8 x 10² g
Finally, convert the mass in grams to kilograms by dividing by 1000 g/kg: 506.8 x 10² g / 1000 g/kg = 0.5068 kg
So, the mass of 6.89 x 10²⁵molecules of CO₂ is approximately 0.5068 kg.
To know more about Avogadro's number, visit:
https://brainly.com/question/28812626
#SPJ4
Give the product of the reaction of excess benzene with isobutyl chloride + AlCl3. Please draw out the full picture to receive Lifesaver rating
The products formed in the reaction of excess benzene with isobutyl chloride + AlCl₃ is tert-Butylbenzene (major)and Isobutyl benzene (minor). The reaction is attached below.
What exactly are reactants and products?Reactants are the building blocks of chemical reactions, and the substances that are produced are known as the products of a reaction. Chemical reactions can be represented by the standard chemical formula: reaction products. Bonds break and reform during chemical reactions. Additionally, the reaction's opposite result occurs.
During this electrophilic substitution process. Benzene attacks the electrophile created and replaces it with H. The generated electrophile, a primary carbocation, is less stable, as seen in the attached image. This primary carbocation undergoes a proton shift to reorganize into a tertiary carbocation. Consequently, trans-butylbenzene is listed as a major product.
To know more about chemical reactions visit:
https://brainly.com/question/26134576
#SPJ4
Consider the following decay series: Which type of nuclear process occurs in steps c and d, respectively
In a potential future fusion power plant such as a tokamak or stellarator, neutrons from DT reactions would generate power for our use.
How is nuclear energy generated?In a fusion reaction, two light nuclei merge to form a single heavier nucleus. The process releases energy because the total mass of the resulting single nucleus is less than the mass of the two original nuclei. The leftover mass becomes energy.Nuclear Fusion reactions power the Sun and other stars. In a fusion reaction, two light nuclei merge to form a single heavier nucleus. The process releases energy because the total mass of the resulting single nucleus is less than the mass of the two original nuclei. The leftover mass becomes energy. Einstein’s equation (E=mc2), which says in part that mass and energy can be converted into each other, explains why this process occurs. If scientists develop a way to harness energy from fusion in machines on Earth, it could be an important method of energy production.
To learn more about nuclear process refer to:
https://brainly.com/question/20842967
#SPJ4
Classify each statement about effective nuclear charge, Zeff, as true or false. True False Effective nuclear charge does not depend on the number of electrons present in an atom. A 1s electron in a Be atom has a smaller 4 than a Is electron in a Li atom.Across a period, as Zeff increases, atomic size increases. Electrons in an s orbital are more effective than those in other orbitals at shielding other electrons from the nuclear charge.Effective nuclear charge increases from left to right across a period on the periodic table. In a N atom, a Is electron has a greater Zeff than a 2s electron.
Effective nuclear charge does not depend on the number of electrons present in atom-- false ; A 1s electron in Be atom has smaller Zeff than a Is electron in Li atom-- false.
What is effective nuclear charge?The effective nuclear charge is actual amount of positive charge experienced by electron in multi-electron atom.
Effective nuclear charge does not depend on number of electrons present in atom. - False
A 1s electron in Be atom has smaller 4 than Is electron in a Li atom. - False
Across period, as Zeff increases, then atomic size increases - False
Electrons in an s orbital are more effective than those in other orbitals at shielding other electrons from nuclear charge - True
Effective nuclear charge increases from left to right across a period on periodic table. - True
In N atom, a Is electron has a greater Zeff than 2s electron. - False
To know more about effective nuclear charge, refer
https://brainly.com/question/13647434
#SPJ4
What is the difference between the atomic mass of Chlorine and the mass numbers of the individual isotopes? Describe the difference - do not just define the terms.
Answer:
All atoms of chlorine (Cl) have 17 protons, but there are chlorine isotopes with 15 to 23 neutrons
Explanation:
Although all atoms of an element have the same number of protons, individual atoms may have different numbers of neutrons. These differing atoms are called isotopes.
hope it is useful mark it as brainlist answer
How many chloride ions are present in 65.5 mL of 0.210 m AlCl3 solution?
Chloride ions, IS 1.21 1022 8.28 1021 ions of chloride Chloride ions, 2.48 1022 4.02 1023 and 5.79 1024 chloride ions, respectively.
What kinds of ions contain chloride?Halogen picks one electron to become an anion (negatively charged ion), Cl, which creates the chloride ion. The hydrochloric acid HCl salts, commonly known as chlorides, are composed of chloride ions. Sea salt, which itself is sodium chloride and has the chemical formula NaCl, serves as an illustration.
The effects of chloride ions on the bodyNearly two thirds of all the anions in the extravascular space are chloride ions. They are required for the maintenance of the brain's osmolality, water content, and acid-base balance. The production of hydrogen chloride (HCl) in the stomachs also requires chloride.
To know more about chloride ions Visit:
https://brainly.com/question/1307733
#SPJ4
in the early 1960s, radioactive strontium-90 was released during atmospheric testing of nuclear weapons and got into the bones of people alive at the time. if the half-life of strontium-90 is 27 years, what fraction of the strontium-90 absorbed in 1962 remained in people's bones in 1990?
The fraction of the strontium-90 that remained in people's bones in 1990 can be determined by using the formula:
N(t) = N0 * (1/2)^(t/T)
Where N(t) is the remaining amount of strontium-90 in people's bones at time t, N0 is the initial amount absorbed in 1962, t is the time elapsed (1990 - 1962 = 28 years), and T is the half-life of strontium-90 (27 years).
So, N(1990) = N0 * (1/2)^(28/27) = N0 * (1/2)^1 = N0 * (1/2) = 0.5 * N0
Therefore, the fraction of strontium-90 that remained in people's bones in 1990 is 1/2 or 0.5.
How can strontium be dangerous to the body?Strontium ium is veritably analogous to calcium and can replace calcium in the bone. This disrupts the normal bone structure, leading to cadaverous problems and blights. babies, children, adolescents, and people who don't get enough calcium are at advanced threat of dangerous health goods related to strontium exposure.
Is stontium highly radioactive?Strontium is a soft, argentine metallic element set up in jewels, soil, dust, coal and oil painting. Strontium set up in nature isn't radioactive and is occasionally called stable strontium.
To know more about radioactive, visit here:
https://brainly.com/question/1770619
#SPJ4
how many types of nonequivalent protons are present in each of the following molecules?
ch3ch3c=ch
ch3ch2c(ch3)2ch2ch3
ch3ch2ch2ch2och3
The type of non-equivalent protons are present in each of the following molecules:
a. 6 non-equivalent protons
b. 4 non-equivalent protons
c. 4 non-equivalent protons
What is non-equivalent protons?Protons that are equivalent, that is, present in the same environment, produce the same peaks. In the proton spectra, non-equivalent protons have different peaks or signals. There are two'sets' of protons in methyl acetate, for example. The three Ha protons have a different - and easily distinguishable - resonance frequency than the three Hb protons because they are in non-identical environments: they are chemically nonequivalent. All three Ha protons, as well as all three Hb protons, are chemically equivalent in NMR terminology. However, the Ha protons are not chemically equivalent to the Hb protons. As a result, the resonance frequency of Ha protons differs from that of Hb protons.
Here,
Each of the following molecules contains the following types of non-equivalent protons:
a. 6 non-equivalent protons
b. 4 non-equivalent protons
c. 4 non-equivalent protons
To know more about non-equivalent protons,
https://brainly.com/question/29317570
#SPJ4
What is the empirical formula of the compound: C5H5N5?
Select one:
a.C5H5N5
b.C2H2N2
c.CHN
Answer:
The correct answer is a. C5H5N5
Explanation:
The empirical formula of a compound is the simplest whole number ratio of the atoms of each element in the compound. In this case, the empirical formula of the compound C5H5N5 is C5H5N5, which is the simplest whole number ratio of the atoms of carbon, hydrogen, and nitrogen in the compound.
C3H8(g) + 5 O2(g) ---> 3CO2(g) + 4 H2O(g)
What volume of oxygen is required to completely combust 0.452L od propane (C3H8) at STP
Answer: 1.86 L of oxygen is required to completely combust 0.452 L of propane at STP.
A shipwright measures the length of a bolt. The length is 41.2cm. What is the length in meters? Write your answer as a decimal.
The length of this shipwright is equal to 0.412 meter.
What is a conversion factor?In Science, a conversion factor can be defined as a number that is typically used to convert (change) a number in one (1) set of units to another, either by dividing or multiplying.
Generally speaking, an appropriate conversion factor to an equal value must be used when it is necessary to perform any mathematical conversion.
Conversion:
100 centimeters = 1 meter.
41.2 centimeters = X meter.
Cross-multiplying, we have:
100X = 41.2
X = 41.2/100
X = 0.412 meter.
Read more on conversion factor here: brainly.com/question/28308386
#SPJ1
An electrochemical cell has a positive standard cell potential but a negative cell potential. what must be true of Q and K for the cell? (choose one and please explain why you chose that letter.)
a.) K>1; Q>K
b.) K<1; Q>K
c.) K>1; Q
d.) K<1; Q
If an electrochemical cell has a positive standard cell potential but a negative cell potential K>1; Q>K.
The standard electrode potential is a gauge of the equilibrium potential. The potential of the electrode is the difference in potential between the electrode and the electrolyte. When the concentrations of all the species present in a semi-cell are represented by unity, the electrode potential is referred to as the standard electrode potential.
Given E0 cell is positive and Ecell is negative. Such that from the below equation we can find that Ecell = E0cell - (0.0592/nF)logQ. So, if Q>K then the required conditions are met. These conditions represent a spontaneous redox reaction.
To learn more about electrochemical cell click here https://brainly.com/question/29486711
#SPJ4
Calculate Kp for the reaction below. COF2(g)⇌12CO2(g)+12CF4(g) Express your answer using two significant figures.
The Kp of the reaction is 1.5x103.
What does the chemical term "reaction" mean?When atoms establish or break chemical bonds, chemical processes take place. Reactants are the substances that begin a chemical reaction, while products are the compounds that are created as a result of the reaction.
What are fundamental chemical processes?Combination, decomposition, single-replacement, double-replacement, and combustion are the five fundamental types of chemical reactions. You can classify a reaction into one of these groups by looking at the reactants and products.
To know more about reaction visit-
https://brainly.com/question/30115256
#SPJ4
What is the pH of a 3.4x10-8 M HClO4 solution at room temperature?A.7.1B.7.0C.5.3D.6.9
7.4 is the pH of a 3.4x10-8 M HClO4 solution at room temperature.
What is pH?PH is an abbreviation for potential of Hydrogen or the acidity or alkalinity of a substance. It is a measure of the hydrogen ion concentration in a solution, and is expressed on a scale from 0 to 14, with 7 being neutral. Solutions with a PH below 7 are considered acidic, and those with a PH above 7 are considered alkaline. PH can be used to measure the acidity or alkalinity of water, soil, chemicals, foods, and other substances. PH is an important factor in many aspects of biology and chemistry, and plays a significant role in understanding and controlling the environment.
pH = - log (H+)
=> -log (3.4x10-8 M)
=> 7.4
To learn more about temperature here:
brainly.com/question/9669641
#SPJ4
what will be the result of a reaction if its enthalpy change is positive, its entropy change is negative and gibbs free energy is positive?
The resultant of the reaction when their change in Enthalpy is positive, change in Entropy is negative and the gibbs free energy is positive is non spontaneous Reaction. Under the specified conditions, this reaction does not promote the creation of products. A reaction must be endothermic, followed by a reduction in entropy, or both in order to be considered nonspontaneous.
The following are the relationships between spontaneity, entropy, and enthalpy:
Gibbs energy will be negative at all temperatures if enthalpy is negative and entropy is positive.
At low temperatures, Gibbs energy will be negative if enthalpy and entropy are both negative.
At any temperature, Gibbs energy won't be negative while enthalpy is positive and entropy is negative. There wouldn't be an unforeseen response.
At high temperatures, Gibbs energy will be negative while enthalpy and entropy are both positive.
As a result, the change in reaction free energy is what ultimately determines whether a reaction is possible.
To learn more about Enthalpy, click here: -
https://brainly.com/question/13775366
#SPJ4
Experiments were done on a certain pure substance X to determine some of its properties. There's a description of each experiment in the table below.
In each case, decide whether the property measured was a chemical or physical property of X if you can. If you don't have enough information to decide, choose can't decide in the third column.
Property M: A small sample of X is put on the pan of a sensitive balance and its weight measured. Next, a magnet is brought near the pan, and the weight is measured again. From the difference of weights in and out of the magnetic field, the value of M may be calculated.
Property O: A sample of solid X is carefully weighed and put inside a vented flask. The flask is heated until oxygen gas starts being produced. After no more oxygen gas is produced, the contents of the flask are removed and weighed, and from the decrease, in weight, the value of O may be calculated.
Property Q: A sample of solid X is carefully weighed and put inside a sealed flask. Pure hydrogen gas is added to the flask, and the mixture heated until the hydrogen starts being consumed. After hydrogen stops being consumed, the contents of the flask are removed and weighed, and from the increase in weight the value of may be calculated.
Property M: Physical property because nothing happens to the atoms of the various substances in the sample, this is a physical attribute. The magnet is used to remove the metallic specks from the sample.
Property O: Chemical property because a reaction is carried out inside.
Property Q: Chemical property because a reaction is carried out inside.
What is the name of a physical property?Observables are a term used to describe physical characteristics. These attributes are not modal. Physical amount refers to a physical property that may be measured. Intensive and extensive properties are frequently used to describe physical properties.
Is volume a type of physical thing?Physical characteristics: As this concrete block demonstrates, the matter has mass and volume. When you try to pick it up, you can feel how heavy it is, and you can see its volume by gazing at it and observing its size. Examples of comprehensive physical attributes include mass and volume.
What is the response for a chemical property?The capacity of a substance to go through a particular chemical transition is described by its chemical property. We search for a chemical change to locate a chemical attribute. Every time there is a chemical transition, one or more new sorts of matter are created that weren't there before.
To know more about chemical property visit:
https://brainly.com/question/29265430
#SPJ4
what are the 4 quantum numbers for the 8th electron in the electron configuration of the ground state of oxygen?
Its four quantum numbers for the eighth oxygen atom electron are n=2, l=1, m=+1 or 1, s=+21 or 21.
What is the oxygen quantum number?chemical attributes.The electronic configuration of the oxygens in its quantum theory ground state is 1s22s22p4.The ground state atoms is in a 3P state, which is an electron-spin sequence of three with a spin number of one (S = 1) and an orbital quantum angular momentum number of one (L = 1).
What are the four quantum orbital numbers?The primary, azimuthal, magnetic, and spin atomic numbers are the four types of quantum numbers.Quantum numbers provide the values of a quantum system's preserved quantities.
To know more about oxygen atom visit:
brainly.com/question/29695801
#SPJ4
when you see two consecutive carbon atoms in a protein backbone structure how would you determine which one is the alpha carbon? provide at least two
1. Look for neighboring atoms and determine which carbon is connected to a hydrogen atom. The carbon connected to the hydrogen atom is the alpha carbon.
What is atom?Atom is an open-source, cross-platform code editor developed by GitHub. It is a hackable text editor for the 21st century, built on Electron, and based on everything developers love about Sublime Text, Visual Studio Code, and more. Atom is designed to be a tool for developers, with many features and packages for customizing the interface, editing code, and debugging code. It is also designed to be customizable and extensible, allowing developers to create their own packages and themes for Atom, as well as use existing packages and themes from the community.
2. Look for the presence of a nitrogen atom in the neighboring atoms. The carbon atom connected to the nitrogen is usually the alpha carbon.
To learn more about atom
https://brainly.com/question/28639692
#SPJ4
The ______________________of an element is the total number of protons and neutrons in the______________________ of the atom.
Answer:
The atomic mass or mass number of an element is the total number of protons and neutrons in the nucleus of the atom.
Explanation:
done
Answer:
mass number
nucleus of an atom
I love physic
explain why hydrogen fluoride, hf, and water, h2o, are very polar molecules but tetrafluoromethane, cf4, and carbon dioxide, co2 are non- polar.
Answer: :)
Explanation:
Calculate the volume of 10.3 g of MnO2?
V = Mass /Density
Density is supposed to be given, but its not
solids typically have a density of 5.03 g/cm^3
V = 10.3/5.03
V = 2.05 cm^3
arachidonic acid, released during aea hydrolysis, is not a precursor for the synthesis of what class of molecules?
Arachidonic acid is crucial as a precursor for the manufacture of the eicosanoid signalling molecules, and ethanolamine is included as a polar head in the phospholipid phosphatidylethanolamine.
What are the uses of ethanolamines?
A starting material for the production of surfactants, complexing agents, and even medications, ethanolamine also serves as an agent for soften leather and as a "scrubber" to remove dioxide, hydrogen sulphide, and other acidic contaminants from waste gas streams.
What other name would you give ethanolamine?
To distinguish it from ammonia (DEA) and triethanolamine, ethanolamine is frequently referred to as monoethanolamine or MEA (TEA). It serves as a feedstock for the manufacture of medicines, corrosion inhibitors, polishes, detergents, emulsifiers, and chemical intermediates.
To know more about ethanolamine visit:
https://brainly.com/question/16751512
#SPJ4
What is the total number of valence electrons in a Fluorine atom in the ground state?
The total number of valence electrons in a Fluorine atom in the ground state is 7.
What is ground state in Chemistry?This refers to the energy level the element normally occupies. It is the state of lowest energy for that electron. There is also a maximum energy that each electron can have and still remain a part of its atom.
An atom goes from a ground state to an excited state by taking on energy from its surroundings this process is known as absorption. The electron absorbs the energy and jumps to a higher energy level. In the reverse process, emission, the electron returns to the ground state by releasing the extra energy it absorbed.
Learn more about ground state on
https://brainly.com/question/6036046
#SPJ1
Given the values of ΔH∘rxn, ΔS∘rxn, and T below, determine ΔSuniv.
A. ΔH∘rxn= 84 kJ , ΔSrxn= 144 J/K , T= 300 K
Express your answer using two significant figures.
ΔSuniv =
Predict whether or not the reaction will be spontaneous.
B. ΔH∘rxn= 84 kJ , ΔSrxn= 144 J/K , T= 751 K
Express your answer using one significant figure.
ΔSuniv =
Predict whether or not the reaction will be spontaneous.
C. ΔH∘rxn= 84 kJ , ΔSrxn=− 144 J/K , T= 300 K
Express your answer using two significant figures.
ΔSuniv =
Predict whether or not the reaction will be spontaneous.
D. ΔH∘rxn=− 84 kJ , ΔSrxn= 144 J/K , T= 406 K
Express your answer using two significant figures.
ΔSuniv =
Predict whether or not the reaction will be spontaneous.
It will be a spontaneous reaction with a ΔSuniv value of -116 J/K.
What is a reaction in science?Chemical parts or chemical elements make up substances. A response is a behavior, tendency, or action that differs from the one that was planned. In the heat of the moment, decisions are made without much consideration or thought of the possible consequences. Reaction: Making a statement as a reaction to an action or remark made by another person.
What are reactions examples?Numerous examples of chemical processes can be found in daily life, including photosynthesis, rust, baking, digestion, combustion, chemical batteries, fermentation, and washing with soap and water. There really are chemical reactions occurring everywhere, not just in the science lab.
a) ΔSsurr = -ΔH∘rx/T
ΔSsurr = -84 kJ/ 300 K
= 0.28 kJ/K = 28.0 J/K
ΔSuniv = ΔSsyst + ΔSsurr
ΔSuniv = -144J/K + 28.0 J/K
= -116 J/K
This will be spontaneous
b) ΔSssur = -84 kJ/ 751 K
= 0.1118 kJ/K
= 111.8 J/K
ΔSuniv = 144J/K + 111.8 J/K
= 255.8 J/K
This is non-spontaneous
c) ΔSsur = - 84 kJ/ 300 K
= - 28.0J/K
ΔSuniv = - 144J/K + (-28.0) J/K
= - 172 J/K
This will be spontaneous
d) ΔSssur = +84 kJ/ 406 K
= 0.2068 kJ/K
= 206.8 J/K
ΔSuniv = 144J/K + 206.8 J/K
= 350.8 J/K
This will be non-spontaneous
To know more about Reaction visit:
brainly.com/question/22817140
#SPJ4
which of the following statements is true concerning a dynamic chemical equilibrium? select all that apply. multiple select question. the amounts of reactant and product do not change over time. the amounts of reactants and products is the same. the rates of the forward and reverse reactions are the same. the reaction has stopped.
The statements which are true concerning a dynamic chemical equilibrium are the rates of the forward and reverse reactions are the same, the amounts of reactants and products is the same.
Dynamic Equilibrium: What Is It?Dynamic equilibrium is the condition of a system where the reversible reaction that is occurring in it ceases changing the ratio of reactants to products, but there is still movement of substances in the reaction. Chemical equilibrium is dynamic because under this equilibrium condition the concentrations of reactant and product are unchanged and the forward and backward reaction velocities are equal.
How is the Le Chatelier principle defined?The Le Chatelier principle is as follows: A movement in the equilibrium's location counteracts the effect of a change in one of the variables that characterizes a system at equilibrium.
Learn more about chemical equilibrium here:
brainly.com/question/14114879
#SPJ4
Balance the following redox reaction occurring in acidic aqueous solution.MnO-4 (ag) + Al (s) + Mn^2+ (ag) + Al^3+ (ag)
The given equation MnO⁻⁴(aq)+Al(s)→Mn⁺²(aq)+Al⁺³(aq) is unbalanced equation . The balanced form of this equation is :
3MnO⁻⁴ + 5Al + 24H → 3Mn⁺² + 5Al⁺³ + 12H₂O
In this reaction, Mn is reduced, and Al is oxidized. So, the oxidation and reduction half-reactions are:
Al → Al⁺³
MnO⁻⁴→Mn²⁺
On balancing O and H, the equations become:
Al→Al⁺³
MnO⁻⁴ + 8H⁺→Mn⁺² + 4H₂O
After balancing charges, the equations become:
Al→Al³⁺ +3e− -(I)
MnO⁻⁴ +8H⁺ +5e− → Mn2++4H₂O --(II)
To make electrons gained and electrons lost equal, multiply equation (I) by 5 and equation (II) by 3.
5Al → 5Al⁺³ + 15e− --(III)
3MnO⁻⁴+ 24H⁺ + 15e− → 3Mn⁺² + 12H₂O -(IV)
On adding equations (III) and (IV) we get the following balanced equation:
3MnO⁻⁴ + 5Al + 24H → 3Mn⁺² + 5Al⁺³ + 12H₂O.
To know more about oxidation, visit:
https://brainly.com/question/16976470
#SPJ4
The number of calories needed to raise the temperature of 32 g of water from 12 °C to 54 °C is ___
a. 1.3 cal. b. 1700 cal. c. 0.76 cal.
d. 384 cal
e. 1300 cal
The exact measurement is E. 1300 calories, which is the amount of energy required to raise 32 g of liquid to 12 °C into 54 °C. the range of 12 to 54 °C for 32 g of water.
In 32 gallons of water, how many electrons are there?
Answer and justification We are aware that a substance has 6.022 x 1023 molecules in 1 mole (Avogadro number). Therefore, 10.651023 molecules are present in 32 grams of water. 10.65 10 23 molecular units.
That many calories are required to warm up one gram of water?
hundred calories
The amount of heat required to increase the temperature of one grams (0.001 liters) of fresh water is measured in calories the boiling point of 100 °C.
To know more water about :
https://brainly.com/question/28465561
SPJ4
The exact measurement is E. 1300 calories, which is the amount of energy required to raise 32 g of liquid to 12 °C into 54 °C.
In 32 gallons of water, how many electrons are there?We are aware that a substance has 6.022 x 1023 molecules in 1 mole (Avogadro number). Therefore, 10.651023 molecules are present in 32 grams of water. 10.65 10 23 molecular units.
That many calories are required to warm up one gram of water?Hundred calories The amount of heat required to increase the temperature of one grams (0.001 liters) of fresh water is measured in calories the boiling point of 100 °C.
To know more water about :
https://brainly.com/question/1216922
#SPJ4
Click on the Bloomberg Terminal screen to view data in the GLCO function. Which metal had the highest price movement? O AluminumO NickelO IronO Gold
metal speaking, aluminum is a 13-atomic-number chemical with the symbol Al. The density of aluminum is about lower than that of other common metals.
What is the metal response?Hard, lustrous, pliable, fusible, and ductile are all characteristics of metal, a solid material that conducts heat and electricity. The materials that have a propensity to donate electrons are metals. They have an electropositive makeup. Natural substances referred to as non are brittle and metabolically and electrically inert elements in the chemical elements are water, carbon, nitrogen, oxide, phosphorus, arsenic, and selenium.
How is metal created?Components Make Up Metals The atomic components of metals include electrons, neutrons, and protons. The quantity of protons in an atom can be used to identify it from an atom of another element. About 25% of a earth's crust is made up of metals. Metal is any of a group of substances with strong thermal and electrical conductivity, malleability, flexibility, and high light reflection.
To know more about metal visit :
https://brainly.com/question/29404080
#SPJ4
when would you use a one-color method of applying light cured gels? when would you use a two-color method for applying light cured gels?
A one-color method of applying light cured gels is typically used when only a single layer of gel is needed. For example, if a technician is performing a simple overlay or sculpting nails.
A two-color method for applying light-cured gels is typically used when layering or creating a gradient effect is desired. For example, if a technician is performing a French manicure or creating an ombre effect, a two-color method would be more appropriate. This method allows for more precise control over the application of the gel and can create more intricate designs.
In summary, one-color method is used for simple overlay and sculpting nails, whereas two-color method is used for creating gradient effect, layering and more intricate designs.
Learn more about gradient effect here:
https://brainly.com/question/28480537
#SPJ4
calculate the frequency of the n = 6 line in the lyman series of hydrogen.
In what region of the electromagnetic spectrum is this line observed?
- radio
- X-ray
- visible
- gamma
- infrared
- ultraviolet
- microwave
The Lyman series is a hydrogen spectral series of transitions and resulting ultraviolet emission lines when an electron moves from n=6 to n = 1 with a frequency of 1.066nm.
Given the electrons are de-excited from n2 = 6 to n1 = 1
From the formula we can observe that, 1/∧ = RZ^2(1/n1^2 - 1/n2^2)
where R is Rydberg’s constant = 109677 cm-1 and Z is atomic number.
Since it is hydrogen atom its atomic number = 1
We know that frequency(f) = c/∧ where 1/∧ = f/c
So, f/c = RZ^2(1/n1^2 - 1/n2^2) where c is speed of
f = 109677 x 10^2 x 1 x (1 - 1/36)
f = 10663041.6 = 1.066nm.
Hence the frequency of the n = 6 line in the lyman series of hydrogen is 1.066nm.
To learn more about frequency click here https://brainly.com/question/14320803
#SPJ4
