moons that show few craters probably

The quantity of waves that pass a set location in a predetermined period of time is known as frequency. Therefore, if a wave passes through in half a second, the frequency is 2 per second. The frequency is 100 times per hour if it takes 1/100 of an hour.

This quiz asks, "What is the frequency of a wave?

The quantity of waves emitted by a source per second is known as the frequency of a wave. It is also the quantity of waves per second that pass a specific spot.

In a nutshell, what is the frequency of a sound wave?

The frequency of the wave is the total number of waves generated in one second. Frequency refers to the number of vibrations measured each second. Here is an easy illustration: The frequency of the waves will be 5 hertz (Hz), or 5 cycles per second, if five full waves are created in one second.

To know more about wave frequency visit;

https://brainly.com/question/14316711

#SPJ4

The absolute value of the slope of the production possibility frontier at any point gives the quantity of the good on the vertical axis that must be given up producing an additional unit of the good on the horizontal axis. (Option C)

The marginal rate of transformation (MRT) enables the economists to evaluate the opportunity costs to produce one extra unit of something. MRT refers to the absolute value of the slope of the production possibility frontier. The production possibility frontier (PPF) refers to a curve on a graph that demonstrates the possible quantities that can be produced of two products if both depend upon the same finite resource. For each point on the frontier displayed as a curved line, there is a different marginal rate of transformation, and this rate is based on the economics of producing the two goods. Hence, MRT is equal to the opportunity cost of an additional unit of the good on the horizontal axis.

Note: The question is incomplete as it is missing options which are A) gives the autarky price of the good on the vertical axis. B) is found by dividing the horizontal change by a vertical change. C) gives the quantity of the good on the vertical axis that must be given up to produce an additional unit of the good on the horizontal axis. D) gives the autarky price of the good on the horizontal axis relative to the autarky price of the good on the vertical axis.

Learn more about Production possibility frontier:

https://brainly.com/question/25071524

#SPJ4

The ratio of the deflection when each is connected in turns to a cell of e.m.f 25 V and internal resistance 50 ohms is 13: 12

Internal resistance can be described as the resistance within a battery, or other voltage source, that causes a drop in the source voltage when there is a current.

The parameters given are :

Coil 1 = 50 turns

Coil 2 = 500 turns

Resistance 1 = 1022

Resistance 2 = 6002

Internal resistance = 50 ohms

Emf = 25v

I = 25/ 50+ 10

I = 25/60

I = 5/ 12 A

[tex]I_{2}[/tex] = 25/50+ 600

 = 25/ 650

 = 5/ 130 A

The ratio of the deflection when each is connected in turns to a cell of e.m. 25 V and internal resistance 50 ohms =

Q1/ Q2

Q1 = N1 x B x [tex]I_{1}[/tex] / c

Q2 = N2 x B x [tex]I_{2}[/tex] / c

therefore Q/ Q2 = (50 x 5/12 )/ (500 x 5/130)

Q1 / Q2 = 12/ 13 which 13: 12

Therefore, The ratio of the deflection when each is connected in turns to a cell of e.m. 25 V and internal resistance 50 ohms is 13: 12.

Learn more about internal resistance at; https://brainly.com/question/20595977

#SPJ1

a) R= Resultant vector  R=A+B+C ,D=12 steps i^−48 steps j^​

The resultant vector is described as a single vector with the same consequence as several other vectors taken together.

R = A + B.Formula 2: To obtain the resultant, opposing vectors are subtracted from one another.Here, a vector B is pointing in the opposite direction of the vector A, as well as the resulting vector is called R.

To know more about Resultant vector visit:

https://brainly.com/question/29740341

#SPJ4

Wavelengths of the radio waves  between the transmitter and radio receiver if the woman is listening to an am radio station broadcasting at 1540 Khz is 194 m.

We can deduce three important relationships from the wave equation:

So the relation is : v = λf

where, v = speed of wavelength

            λ = wavelength

            f = frequency

Given, frequency (f) = 1540Khz = 1540000hz

           v = speed of light = [tex]3 * 10^{8} m/s[/tex]

Putting these values in above equation we get λ = 194m

So Wavelengths of the radio waves  between the transmitter and radio receiver if the woman is listening to an am radio station broadcasting at 1540 Khz is 194 m.

To know more about waves visit:

https://brainly.com/question/24171968

#SPJ4

The statement which is true for three blocks is c)the three blocks remain in thermal equilibrium. So, correct option is c.

Specific heat capacity or warm limit is an actual property of issue, characterized as how much intensity to be provided to an item to deliver a unit change in its structure. The SI unit of intensity limit is joule per kelvin (J/K).

Two actual frameworks are in thermal equilibrium in the event that there is no net progression of nuclear power between them when they are associated by a way penetrable to warm. Warm harmony submits to the zeroth law of thermodynamics. A framework is supposed to be in warm harmony with itself on the off chance that the temperature inside the framework is spatially uniform and transiently consistent.

The reason behind of being in thermal equilibrium state is because specific heat capacity depends on the type of material or we can it depends on the property of the material by which it is made, but not on orientation of the material how it is placed.

Hence, option c is correct.

To know  more about thermal equilibrium, visit here:

https://brainly.com/question/14473445

#SPJ4

The net force exerted on a car traveling in a circular path at constant speed is A) directed toward the center of the curve. So, correct option is A.

The force which is acted on the car and responsible to move a car towards the center of the curve is called as centripetal force. A centripetal force is a force that causes a body to follow a bended way. Its course is dependably symmetrical to the movement of the body and towards the decent place of the quick focus of shape of the way. Isaac Newton portrayed it as "a force by which bodies are drawn or prompted, or in any capacity tend, towards a point regarding a center". In Newtonian mechanics, gravity gives the centripetal force causing galactic circles.

Hence, correct option is A.

To know more about Centripetal Force, visit here:

https://brainly.com/question/11324711

#SPJ4

The number m has the ability to make the inequality true = -8

In mathematics, "inequality" refers to a relationship between two expressions or values that are not equal to one another.

Inequalities which are commonly used are as follows :

Less than = <

Greater than = >

Less than and equal = ≤

Greater than and equal = ≥

The integer that will make the inequality true is m = -8

(1/4)(m - 4) ≤ (1/8)(m - 16)

1/4 x -12 ≤ 1/8 x -24

-3 ≤ -3

According to the given information

We have,

One-fourth times the difference between m and four is less than or equal to one-eighth times the difference between m and sixteen

This can be written as,

(1/4)(m - 4) ≤ (1/8)(m - 16)

The value at which the inequality will be true.

S = {−32, −8, 16, 32}

We will check each value.

m = -32

1/4 x -36 ≤ 1/8 x -48

-9 ≤ -4

Not true

m= -8

1/4 x -12 ≤ 1/8 x -24

-3 ≤ -3

True

m = 16

1/4 x 12 ≤ 1/8 x 0

3 ≤ 0

Not true

m = 32

1/4 x 28 ≤ 1/8 x 16

7 ≤ 2

Not true

Thus,

The number m has the ability to make the inequality true = -8

(1/4)(m - 4) ≤ (1/8)(m - 16)

1/4 x -12 ≤ 1/8 x -24

-3 ≤ -3

To know more about inequalities here:

https://brainly.com/question/28823603

#SPJ4

The answers include the following;

This is referred to as the degree of hotness or coldness of a substance and it is influenced by thermal energy.

The direction in which the heat flows is from hot chocolate to the vanilla ice cream and the kinetic energy of the hot chocolate decreases once you add the ice cream.

Read more about Temperature here https://brainly.com/question/25677592

#SPJ1

V1f= -6.75 m/s (left),original elastic potential energy = 12.7575 J,The original energy is in the Spring,In bursting-apart process, The conservation of momentum is Holds.

(a) Mass of the first block, M

Mass of the second block, 3M

final speed of the second block, V2f =2.25 m/s

Before the cord burns, both masses are in rest oposition,

Hence, initial speed of then m is 0,

They are V1i, V2i  = 0 m/s

Hence, by conservation of momentum,

   MV1i + 3MV2i = MV1f + MV2f

    M(0) + 3M (0) = MV1f + 3M (2.25 m/s)

                       V1f= -6.75 m/s    (left)

(b) Kinetic energy of the system,

  K.E = 1/2 MV1f2 + 1/2 3M V2f2

        =1/2 (0.420 kg)(6.75 m/s)2+1/2(1.26)(2.25 m/s)2    (given, M = 0.420 kg)

        =9.568125  J + 3.189375 j

         =12.7575 j

According to conservation of energy,

The loos of kinetic energy is used to gain in original elastic potential energy

Hence, original elastic potential energy = 12.7575 J

(c) Since the spring stores the potential energy,

The original energy is in the Spring

(d) In bursting-apart process, The conservation of momentum is Holds.

Learn more about Potential energy here:

https://brainly.com/question/24284560

#SPJ4

30.05 sec much time it takes for the amplitude to decay to 43.2 percent of its original initial value

The greatest displacement or distance that a point on a wave or vibrating body may travel in relation to its equilibrium position It is equivalent to the vibration path's half-length.

Given data

Time period (T) = 2.84 sec

Reduction  = 93.6  %

We know that logarithmic decrement is given by:

a₁ = a₀ [tex]e^-{bt}[/tex]

where b = constant

As a₁ = 0.936 a₀

or, 0.936 a₀ = a₀ [tex]e^-{b*2.84}[/tex]

or, b = 0.002

Now a₁  = 0.432 a₀

or, 0.432 a₀ = a₀ [tex]e^-{0.002*t}[/tex]

or, t = 30.05 sec

So, it will take 30.05 sec to decay 43.2 %.

To know more about amplitude refer to:

https://brainly.com/question/1380029

#SPJ1

The centripetal acceleration would the atoms have when they are close to the speed of light is 3 * 10¹² m/s².

Centripetal acceleration is the acceleration of a body that is traveling in a circular path.

Centripetal acceleration is directed toward the center of the circular path. The centripetal acceleration of a body is equal and opposite to the centrifugal acceleration of a body which is directed outwards from the center of the circular path the object is traveling in.

The formula for calculating centripetal acceleration is given below as follows:

a = v² / r

where;

Calculating the centripetal acceleration of the proton:

v = 3.0 * 10⁸ m/s

r = 30 km = 30000 m

a = (3.0 * 10⁸)² / 30000

a = 3 * 10¹² m/s²

Learn more about centripetal acceleration at: https://brainly.com/question/22103069

#SPJ1

a) since a=0 therefore, friction force =0

b) friction = 59.5 × 1 =59.5 N.

c)maximum acceleration = 0.566 × g =5.54 m/s².

The force preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction. There are various kinds of friction: Two solid surfaces in touch are opposed to one another's a relative lateral motion by dry friction.

Acceleration is the rate at which an object's velocity with respect to time changes. They are vector quantities. The direction of the net force acting on an object determines the direction of its acceleration.

Hence, (a) since a=0 therefore, friction force =0, (b) friction = 59.5 × 1 =59.5 N, (c)maximum acceleration = 0.566 × g =5.54 m/s².

To know more about Friction, check out:

https://brainly.com/question/24338873

#SPJ4

Answer:

Explanation:

The energy gained by the water can be calculated using the formula for the heat capacity of water, which is: q = mc * Delta T, where q is the energy gained by the water, m is the mass of the water, c is the heat capacity of water, and Delta T is the change in temperature of the water. In this case, m = 1 kg, c = 4.184 J/g * oC, and Delta T = 23.059 - 20 = 3.059 oC. Substituting these values into the formula, we find that the energy gained by the water is approximately 52.3 J.

The heat gained by water will be equal to the heat lost by the material bolt and it can be calculated using calorimetric equation. The heat energy gained  by water is equal to 12800 J.

Calorimetry is an analytical technique used to determine the heat energy absorbed or released by a reaction system. The calorimetric equation connecting the heat energy q with the mass m, temperature difference ΔT and specific heat capacity c is written as:

q = m c ΔT.

The specific heat capacity of water = 4.18 J/ g °C

mass = 1 kg = 1000 g

temperature difference from 20 to 23. 059 °C.

The heat energy gained by water from the material bolt is then calculated as follows:

q = 4.18 J/ g °C × 1000 g × (23. 059 0 - 20 °C )

  = 12800 J.

Therefore, the energy gained by water during the process is 12800 J.

To find more on calorimetry, refer here:

https://brainly.com/question/11477213

#SPJ2

The ring particle would undergo roughly 8.3 trillion collisions over that period of time.

The age of the solar system is estimated to be 4.6 billion years. This means that a ring particle would undergo roughly 8.3 trillion collisions over that period of time. To calculate this number, we can use the following formula:

Number of collisions = Time (in hours) / Time between collisions (in hours) x Number of years

Number of collisions = 4.6 x 109 (years) x 24 (hours/day) x 365.25 (days/year) / 5 (hours)

Number of collisions = [tex]8.3 * 10^{12}[/tex] (collisions)

Therefore, the number of collisions in the ring are

For more questions like Collisions click the link below:

https://brainly.com/question/1570748

#SPJ4

The weightlifter can exert a power of 1000 watts, for the given work done and time.

The quantity of energy moved or converted per unit of time is known as power. The watt, or one joule per second, is the unit of power in the International System of Units.  Power is a scalar quantity.

Only when a particular distance is traversed or when force is applied is work performed. No work is done if the force given to the object does not cause it to move.

Calculations:

Power (P) = work done/time taken

Work done = 2000N * 2m = 4000Nm

Time taken = 4 seconds

P= 4000Nm/4sec = 1000watts

So, the person can exert a power of 1000 watts.

Hence, the weightlifter can exert a power of 1000 watts, for the given work done and time.

To know more about Power, check out:

https://brainly.com/question/1634438

#SPJ4

Since the momentum remains same before and after push-off, therefore Tracey's speed will be 0.492 m/s.

Momentum is a product of mass and the velocity of a body.

The initial momentum is always equal to the final momentum during collisions between two bodies.

Therefore; M₁U₁ +M₂U₂ = M₁V₁+ M₂V₂,

where M₁ is the mass of Tracey

M₂ is the mass of Jonas,

U is the initial velocity

V is the final velocity.

(32 ×0)+ (45×0) = (32 × V₁) + (45 × 0.35)

0 = 32V₁ + 15.75

32 V₁ = - 15.75

V₁ = - 0.492 ( negative sign indicates difference in direction)

There, Tracey's speed will be 0.492 m/s.

To know more about momentum,

https://brainly.com/question/8692215

#SPJ4

The picture of free body diagram drawn below:

A free-body diagram (FBD; sometimes known as a force diagram) is a graphical representation used in physics and engineering to illustrate the applied forces, moments, and consequent reactions on a body under a particular state.

The object of interest, the forces acting on it, and the resolution of each force vector into its x- and y-components are all shown in a free-body diagram. Each item in the issue requires a distinct free-body diagram.

Forces are depicted as arrows heading away from the object, which is depicted as a dot. Occasionally known as force diagrams.

The picture of free body diagram drawn below:

To know more about free body diagram refer to:

https://brainly.com/question/29366081

#SPJ1

The complete question is as follows:

Distance Matt will land 1 m away from the stage.

Distance is a numerical measurement of how far apart two objects or points are in space. It is usually measured in linear units such as meters, miles, or kilometers. Distance can also be measured in angular units such as degrees or radians. Distance can be measured in both two-dimensional and three-dimensional space. In two-dimensional space, distance is measured along the x-axis and y-axis. In three-dimensional space, distance is measured along the x-axis, y-axis, and z-axis.

The horizontal distance traveled by Matt can be calculated using the equation:
d = v * t
where d is the distance, v is the velocity, and t is the time.

In this case, v = 2 m/s and t = the time it takes for Matt to fall 2.5 m. This can be calculated using the equation:
d = g * t^2 / 2
where g is the acceleration due to gravity, which is 9.8 m/s^2.

Plugging in the values, we get:
t = sqrt(2*2.5/9.8) = 0.5 seconds

Therefore, the distance traveled horizontally can be calculated as:
d = 2 * 0.5 = 1 m
Therefore, Matt will land 1 m away from the stage.

To learn more about Distance
https://brainly.com/question/23012691
#SPJ1

If instead of a single wire we use a coil of thick copper wire containing 24 turns, then the voltmeter reads 120 V.

A voltmeter is also known as a voltage meter. It is an instrument used for measuring the potential difference or voltage between two points in an electrical circuit.

Emf of a solenoid is given by formula:

E= - N (dФ/dt)

Where,

N is Number of turns;

Ф is  Magnetic flux and t is time taken

The negative sign indicates the direction of flow or polarity.

It can be seen clearly that the induced emf is directly proportional to the number of turns.

So, if the initial voltage is given 5 volts at a set number of 24 turns, the voltmeter reads:

= E *N

= 5 * 24

Voltmeter reads = 120 volts.

To know more about voltmeter, refer

https://brainly.com/question/15016685

#SPJ4

The correct expression of the acceleration of the object is given as; a = F/m. Option B.

We know that the acceleration has to do with the ratio of the force and the mass. The Newton second law can lead us to the definition of the force that acts on an object that does involve the acceleration of the object.

We then have;

F = ma

F = force on the object

m = mass of the object

a = acceleration of the object

Then we have;

a = F/m

This is the acceleration of the woman.

Learn more about acceleration:https://brainly.com/question/12550364?

#SPJ1

Answer:

0.099

Explanation:

For 1/4 value of r is the potential energy equal to the total energy.

Potential energy is the form of energy that a object gain.

first want to find the value of our, what value of R is the potential energy equal to the total energy? So you are is equal to negative 1/4 pi epsilon naught E squared over R. Which is the potential energy. And E. This is a total energy. So we just set these two values equal to each other. So negative 1/4 pi epsilon naught E squared over R. Is equal to negative M. E. To the fourth divided by eight E squared and squared each squared and R is equal to two. So we can go ahead and solve this. We get R. Is equal to two. Absolutely not H squared divided by pi M. R. E squared. And actually this is just two times A. So the radius is to a. Now part B. We want to find the probability of electron being found in this classically forbidden forbidden region are greater than the classical turning point. So we need, so first of all let's look at the ground state wave function which is one over squared pi a cubed times E. To the negative are over A. This is what will be needed to integrate to find the probability. So the probability goes from R. is equal to two way to sigh.

To know more about potential energy click-

https://brainly.com/question/13997830

#SPJ1

The orbital form of an electron is generally described by the angular momentum quantum number, denoted by the letter l. The value of the main quantum number, n, determines the value of l.

The sum of the orbital angular momenta from each electron creates the total orbital angular momentum, which has a magnitude of square root of L(L + 1) (L), where L is an integer.

Therefore, using the equation l=n1 l = n 1 and knowing the main quantum number, it is easy to determine the angular momentum quantum number. According to this statement, the primary quantum number will never be greater than the azimuthal quantum number.

To know more about angular momentum visit:-

https://brainly.com/question/29563080

#SPJ4

The force constant of the bungee cord when a person of mass 70 kg leaps on a bridge with it is 219.52 N/m.

The force constant or spring constant is a measure of the stiffness of a spring. It is the force per unit deformation of the spring. Its SI unit is N/m.

To calculate the force constant of the bungee cord, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the force constant of the bungee cord is 219.52 N/m.

Learn more about force constant here: https://brainly.com/question/25239010

#SPJ1

The number of electrons drifting through the circuit is 3×10¹⁹.

An electron is a negatively charged subatomic particle that together with protons and neutrons form an atom's nucleus.

To calculate the total number of electrons drifting through the circuit, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the number of electrons is 3×10¹⁹.

Learn more about electrons here: https://brainly.com/question/860094

#SPJ1

The vibration amplitude of a spring with a constant of 20 N/m which has a speed of 1.5 m/s with a mass of 0.50 kg which is associated = 0.237 m.

When an object oscillates on a spring, the kinetic energy and potential energy of the mass-spring system change with time.

The total energy (the kinetic energy + potential energy) is constant.

The kinetic energy of an object moving with speed v is:

½ mv².

The potential energy of a spring with a constant k is:

= ½ kx².

The total energy = ½ kx² + ½ mv² = ½ kA².

The total energy equation gives the general property of simple harmonic oscillations which is directly proportional to the square of the amplitude.

And, we have:

m = 0.50 kg

k = 20 N/m

v = 1.5 m/s

Remember, the total energy = ½ kA².

So,

A² = (m)(v)² / k

= (0.50) (1.5)² / 20

= 0.05625

A = [tex]\sqrt{0.05625}[/tex]

= 0.237 m

Learn more about oscillation energy here: https://brainly.com/question/28543819

#SPJ4

The separates the attached mass from the pendulum's peak.

The moment of inertia of an item is the opposite of its angular acceleration. Moment of inertia is influenced by mass and gyrating radius, respectively. The moment of inertia can be altered by modifying the rotational axis.

Moment of inertia: The phrase "moment of inertia" refers to a physical quantity that measures how resistant a body is to having the direction of a torque change the speed at which it rotates along an axis (turning force).

Complete question:

You are at a furniture store and notice that a Grandfather clock has its time regulated by a physical pendulum that consists of a rod with a movable weight on it. When the weight is moved downward, the pendulum slows down; when it is moved upward, the pendulum swings faster. If the rod has a mass of 1.23kg and a length of 1.25m and the weight has a mass of 1.36kg, where should the mass be placed to give the pendulum a period of 2.00 seconds? Measure the distance in meters from the top of the pendulum.

To learn more about moment of inertia visit: https://brainly.com/question/29415485

#SPJ4

The asteroid belt circles the sun between the orbits of mars and jupite is 4.38 x 10^11m .

What is Kepler's 3rd law?

The cubes of the semi-major axes of the planets' orbits are precisely proportional to the squares of the planets' orbital periods. According to Kepler's Third Law, as an orbiting planet's radius rises, so does the time of its orbit around the Sun.

Using Kepler's 3rd law which is: T² = 4π²r³ / GM

Solved for r :

r = [GMT² / 4π²]⅓

Where G is the universal gravitational constant, M is the mass of the sun,T is the asteroid's period in seconds, and r is the radius of the orbit.

Change 5.00 years to seconds :

5.00years = 5.00years(365days/year)(24.0hours/day)(6... = 1.58 x 10^8s

The radius of the orbit then is computed:

r = [(6.67 x 10^-11N∙m²/kg²)(1.99 x 10^30kg)(1.58 x 10^8s)² / 4π²]⅓ = 4.38 x 10^11m

To learn more about asteroid's period visit:https://brainly.com/question/17004253

#SPJ4

When the core temperature rises, stars start burning helium to carbon. Hydrogen and helium are fused in a shell surrounding the core, raising the temperature.

The most prevalent method of generating energy in the cosmos is hydrogen fusion. The gravitational force is utilised to fuse hydrogen at the centres of our Sun and other stars, where it has a density more than 70 times greater than that of steel. Thus, all of the heat and light on earth comes from fusion. Helium is a chemical element with the atomic number 2 and the symbol He. The first member of the noble gas group in the periodic table, it is a colourless, odourless, tasteless, inert, monatomic gas that is not harmful.

Learn more about gravitational force here

https://brainly.com/question/12528243

#SPJ4