Most of Central Asia has which type of climate?
O A. tropical rainforest
OB.
desert and steppe
OC.
alpine tundra
O D. humid continental
Reset

Answers

Answer 1

Most of Central Asia has a climate characterized by deserts and steppes, which is option B.

Central Asia is known for its vast arid and semi-arid regions, encompassing countries such as Kazakhstan, Uzbekistan, Turkmenistan, Kyrgyzstan, and Tajikistan. These areas are dominated by extreme continental climates, with hot summers and cold winters.

Deserts cover a significant portion of Central Asia, including the vast Kyzylkum Desert in Uzbekistan and Kazakhstan, the Karakum Desert in Turkmenistan, and the Taklamakan Desert in western China. These regions experience high temperatures, limited precipitation, and sparse vegetation.

In addition to deserts, Central Asia also features vast steppes, which are large grassland plains. These steppes are characterized by a semi-arid climate with moderate temperatures and low rainfall. They support a diverse range of grasses and herbs but lack significant tree cover.

Overall, the arid and semi-arid nature of Central Asia's climate is primarily due to its geographical location, surrounded by high mountain ranges and distant from major bodies of water, resulting in limited moisture and a prevalence of desert and steppe climates throughout the region. Therefore the correct option is b

Know more about deserts  here:

https://brainly.com/question/28211670

#SPJ8


Related Questions

give an example of a location where you expect lateral movement to impact the type of sediments deposited. describe why this is the case.

Answers

One example of a location where lateral movement can impact the type of sediments deposited is along a river or stream channel.

When a river or stream flows through a landscape, it carries sediment with it, including rocks, sand, silt, and clay. The movement of water in a river is not always uniform, and it can vary in speed and direction. This variation in velocity and direction causes lateral movement, or the side-to-side movement of water within the channel.

As the water moves laterally within the channel, it interacts with the banks and bed of the river, eroding and depositing sediment in different areas. The deposition of sediments is influenced by the velocity of the water.

When the water velocity decreases, it loses the ability to carry and transport larger and heavier sediment particles. As a result, these particles are deposited in the areas of the river where the water slows down, such as the inner bends or meanders.

On the other hand, the faster-moving water in the outer bends of the river or stream has a higher velocity and is capable of carrying finer sediments. Consequently, these finer sediments such as sand, silt, and clay are transported downstream where the water velocity is higher and deposited in areas where the flow slows down, such as point bars or river deltas.

The lateral movement of water within a river or stream channel is influenced by factors like the gradient of the land, the shape and configuration of the channel, and the presence of obstacles such as rocks or vegetation. These factors can cause the water to shift from side to side, creating a dynamic environment where sediments are constantly eroded, transported, and deposited.

Therefore, the lateral movement of water within a river or stream channel significantly impacts the type of sediments deposited. It leads to the sorting and segregation of sediment particles, with coarser sediments being deposited closer to the inner bends and finer sediments being transported and deposited downstream in areas with slower water velocities.

for more questions on sediments

https://brainly.com/question/29240254

#SPJ8

Using reliable sources of information, collect data comparing the population growth of two countries in each of the following regions: Asia, Europe, and Africa. Organize your data into at least three categories, such as birth rates, death rates, and population growth rates. Write a statement about the data for each region. What are the similarities and differences between the data for these regions?

Answers

These differences can be attributed to various factors, including cultural norms, socioeconomic conditions, and government policies regarding family planning and healthcare  unropes generally has lower birth rates, leading to population decline or slow growth, while Asia and Africa have higher birth rates, resulting in faster-growing populations.

Asia:

Country 1: China

Birth rate: 11.4 births/1,000 population

Death rate: 7.8 deaths/1,000 population

Population growth rate: 0.36%

Country 2: India

Birth rate: 18.2 births/1,000 population

Death rate: 7.3 deaths/1,000 population

Population growth rate: 1.08%

Statement: In Asia, both China and India have relatively high birth rates compared to the death rates, indicating a positive population growth. However, India experiences a higher birth rate and population growth rate compared to China.

This suggests that India's population is growing at a faster pace than China's.

Europe:

Country 1: Germany

Birth rate: 8.2 births/1,000 population

Death rate: 11.4 deaths/1,000 population

Population growth rate: -0.16%

Country 2: France

Birth rate: 11.9 births/1,000 population

Death rate: 9.1 deaths/1,000 population

Population growth rate: 0.26%

Statement: In Europe, both Germany and France have lower birth rates compared to the death rates, resulting in a negative population growth rate for Germany and a positive but relatively low growth rate for France. This indicates that both countries are experiencing population decline or slow growth.

France, with a higher birth rate than Germany, manages to maintain a slight population growth.

Africa:

Country 1: Nigeria

Birth rate: 36.6 births/1,000 population

Death rate: 8.2 deaths/1,000 population

Population growth rate: 2.58%

Country 2: South Africa

Birth rate: 20.4 births/1,000 population

Death rate: 9.2 deaths/1,000 population

Population growth rate: 0.93%

Statement: In Africa, both Nigeria and South Africa experience higher birth rates compared to death rates, resulting in positive population growth rates.

Nigeria has a significantly higher birth rate and population growth rate than South Africa, indicating a faster-growing population.

This reflects the overall trend in Africa, where many countries are experiencing high population growth rates due to relatively high birth rates.

Similarities across the regions include the positive population growth rates in most countries, indicating higher birth rates compared to death rates.

However, the magnitude of these rates varies greatly between regions and countries.

Europe generally has lower birth rates, leading to population decline or slow growth, while Asia and Africa have higher birth rates, resulting in faster-growing populations.

Additionally, Africa tends to have higher birth rates and population growth rates compared to Asia.

For similar questions on  socioeconomic conditions,

https://brainly.com/question/28293910

#SPJ8

What is the oldest known physical evidence of life on the planet? O Trace fossils O Cyanobacteria O Chemofossils O Body fossils Bacteria fossil cells

Answers

The oldest known physical evidence of life on the planet includes various fossil types.

One of the oldest known physical evidence of life on Earth is cyanobacteria, a type of bacteria that is capable of producing oxygen through photosynthesis.

Cyanobacteria appeared on Earth about 2.5 billion years ago, and they are still present in modern-day ecosystems.The next oldest known physical evidence of life on Earth is body fossils.

These are the actual remains of organisms that have been preserved in rocks.

One of the oldest known body fossils is that of stromatolites, which are layered structures that form when certain types of bacteria grow on the seafloor.

To know more about various visit:

https://brainly.com/question/30929638

#SPJ11

What is one major way the rise of agriculture changed life for the people living during the Neolithic Revolution? How do you think it continues to impact life today? 2. As we shift the conversation in the course now into an emphasis on cultural anthropology, why do you think globalization is such a major aspect to consider?

Answers

One major way the rise of agriculture changed life during the Neolithic Revolution was the transition from a nomadic hunter-gatherer lifestyle to settled agricultural communities.

Impact of agriculture in our lives today

The impact of agriculture continues to shape our lives today in several ways. Some of the key impacts include:

Food production and security: Agriculture remains essential for meeting the food demands of a growing global population. Modern agricultural practices, including advancements in crop breeding, irrigation, and machinery, have significantly increased food production and improved food security in many parts of the world.

Economic systems: Agriculture forms the foundation of economies worldwide, both in terms of providing employment opportunities and contributing to national GDP. It supports various sectors, such as food processing, distribution, and marketing, and plays a vital role in international trade.

Regarding the emphasis on cultural anthropology and the significance of globalization, globalization is a major aspect to consider because it has transformed the way societies and cultures interact and function.

Learn more about Neolithic Revolution at

https://brainly.com/question/1961955

#SPJ4

4. Based on your answer to question 3, do you think that Los Angeles County will have to find new sources of water in the future? Will Lee County? Give a reason to support your claim

Answers

Yes, it is likely that Los Angeles County will have to find new sources of water in the future.

Will Los Angeles County need to seek alternative water sources?

As one of the most populous and water-stressed regions in the United States, Los Angeles County has been facing water supply challenges for years. The county heavily relies on imported water from distant sources, such as the Colorado River and the Sacramento-San Joaquin Delta.

However, these sources are under increasing pressure due to population growth, climate change, and prolonged droughts. To ensure a sustainable water supply for its residents, Los Angeles County will need to explore and implement new strategies, including diversifying its water portfolio and investing in local water sources. This may involve expanding water recycling and desalination projects, capturing stormwater and enhancing groundwater replenishment as well as promoting water conservation and efficiency measures.

Read more about sources of water

brainly.com/question/12906010

#SPJ4

Large "Plinian-type" (super-explosive) volcanic eruptions are associated with which characteristics of volcanic magma? high viscosity and high volatile content high viscosity and low volatile content low viscosity and high volatile content low viscosity and low volatile content None of the above

Answers

Large "Plinian-type" (super-explosive) volcanic eruptions are associated with high viscosity and high volatile content of volcanic magma.

Volcanic eruptions can be catastrophic and cause widespread damage.

When a volcano erupts, a variety of different materials can be ejected, including ash, rock fragments, and gas.

The viscosity and volatile content of the magma determine the explosivity of a volcanic eruption. In general, explosive eruptions are associated with high viscosity and high volatile content of volcanic magma.

To know more about associated visit:

https://brainly.com/question/29195330

#SPJ11

Define the relationship between a mineral, an element, and a rock

Answers

Minerals, elements, and rocks are the primary building blocks of the Earth's crust. All three have distinct properties that distinguish them from one another.

The relationship between these three is fundamental to our understanding of Earth's geology and the formation of rocks and minerals.MineralMinerals are natural, inorganic substances that have a characteristic crystalline structure and chemical composition.

Minerals are formed from natural geological processes, such as the cooling of molten magma or the evaporation of seawater.

They are categorized according to their chemical composition, physical properties, and crystal structure.

To know more about distinguish visit:

https://brainly.com/question/32824243

#SPJ11

After the Los Angeles race riots the community addressed the following
- Curricular materials in schools addressing multicultural history
- Race relations with members of South Central and Beverly Hills
- Gained bank land for African American businesses
- Food insecurity that merged from the destruction of grocery stores

Answers

The Los Angeles race riots of 1992 had a lasting impact on the community. In response, the community addressed a number of issues.

Here, all the options are correct.

Curricular materials in schools were updated to include multicultural history, which was intended to help foster understanding and respect between different cultures. Race relations between members of South Central and Beverly Hills were improved through increased dialogue and understanding.

Bank land was also gained for African American businesses, which helped to create economic opportunities for the community. Finally, food insecurity was addressed by providing assistance to those affected by the destruction of grocery stores. These efforts helped to create a more equitable and just society in the wake of the riots.

Here, all the options are correct.

know more about multicultural here

https://brainly.com/question/32179292#

#SPJ11

How do each of these orbital parameters affect the seasonal cycle in the Northern Hemisphere (NH) ? 1. Increases in the tilt of the Earth's axis with respect to its orbit (obliquity) the NH seasonal cycle. 2. When Earth's closest approach to the sun (perihelion) occurs during the NH summer, the NH seasonal cycle 3. Assuming NH summer occurs at perihelion, an increase in eccentricity of Earth's orbit around the sun the NH seasonal cycle.

Answers

1. An increase in the tilt of the Earth's axis with respect to its orbit (obliquity) will cause the NH summer to become longer and hotter while the NH winter will become shorter and colder.

2. When Earth's closest approach to the sun (perihelion) occurs during the NH summer, this intensifies the NH summer season by bringing the Earth closer to the sun resulting in stronger solar radiation.

3. Assuming NH summer occurs at perihelion, an increase in eccentricity of Earth's orbit around the sun will mean that when the Earth is at its closest point to the sun during each cycle, it will be closer than before.

The tilt of the Earth's axis with respect to its orbit, referred to as obliquity, has a significant effect on the seasonal cycle in the Northern Hemisphere. Increases in the tilt of its axist causes a greater difference between the temperatures of summer and winter. When the Earth’s closest approach to the sun, known as perihelion, occurs during the Northern Hemisphere's summer, the temperatures are slightly hotter, and the summer season can last a bit longer.

An increase in the eccentricity of Earth's orbit around the sun can also affect the NH seasonal cycle, as the temperature of northern regions can experience more marked differences in temperature between the warmest and coldest times of the year. In short, obliquity, perihelion, and eccentricity all have a strong influence on the nature of the seasonal cycle in the Northern Hemisphere.

know more about solar radiation here

https://brainly.com/question/32310977#

#SPJ11

When you look up at the sky and see two stars of different brightness, the fainter one MUST have a lower luminosity? True False Below you are given the apparent magnitudes of three stars. Rank these in the order of brightest to dimmest (a rank of 1 would correspond to the brightest). 0.3 1.5 −2.2

Answers

The given statement, When you look up at the sky and see two stars of different brightness, the fainter one MUST have a lower luminosity is False.

Although it is true that stars of different brightness can have different luminosity levels, their brightness doesn’t always correlate with their luminosity. The brightness of a star is determined by its apparent magnitude - a measure of how bright it appears from Earth - while its luminosity is determined by its absolute magnitude - a measure of how much energy it emits into space.

The apparent magnitude of a star is affected by its distance from Earth, so a star may appear brighter or fainter depending on how far away it is from us. For example, a star that appears faint to us might be relatively close to Earth whereas a star that appears bright might be farther away. This means that two stars in the night sky may appear different in brightness but have the same luminosity.

know more about luminosity here

https://brainly.com/question/13945214#

#SPJ11

Which of the following is necessary for glacial growth? weaker tides stronger tides cooler summers cooler winters

Answers

The growth of glaciers is heavily dependent on the weather and environmental conditions. Cooler temperatures and high precipitation are both essential for glacial growth.

Correct option is D.

Cooler summers and winters are necessary for colder temperatures to set in, allowing the snow to accumulate longer and at higher elevations. This snowfall gradually accumulates to form ice, which is the main component of a glacier.

Additionally, weaker tides are important for glacial growth as they help to slow down the meltwater that is produced by the glacier, and also prevents water from eroding the edges of the glacier, which can slow the growth. In other words, all of these factors are necessary for glacial growth: cooler summers and winters, and weaker tides, while stronger tides would have the opposite effect.

Correct option is D.

know more about glaciers here

https://brainly.com/question/19709729#

#SPJ11

Most plant protein sources are deficient in one or more of the
essential amino acids.
Group of answer choices,
True
False

Answers

The given statement, Most plant protein sources are deficient in one or more of the essential amino acids is True because Plants produce proteins, but they are generally missing one essential amino acid.

This means that, unlike animal proteins, they do not provide all the essential amino acids the body needs. Essential amino acids are important for many functions in the body including growth and development, repairing cell damage and tissue maintenance. For this reason, getting adequate amounts of all the essential amino acids from one's diet is important.

For a balanced diet, plant sources of protein such as legumes, nuts, grains, and seeds are very nutritious sources of nutrition, however, combining different plant proteins to get all the essential amino acids can be difficult. Additionally, some supplementing, such as with certain amino acids found in animal sources, may be necessary to ensure adequate and complete nutrition of essential amino acids.

know more about plant protein here

https://brainly.com/question/4340880#

#SPJ11

About 97% of the water on earth is stored in the Ocean. It is also the habitat for about 15% of the lives on the earth. The Oceanic Circulation is also an essential ways for the earth to transfer the received solar energy to keep a good balance in energy budget. It is also an essential cause of different pressure zones and wind patterns distributed in different parts of the Earth, and so has a significant impact on different climates in different regions on the earth. However, many environmental issues are happening in the ocean, including ocean pollution, ocean acidification, sea level rise, and sea temperature rise, which not only affect the lives in the ocean, but also affects the global climate and the lives on the land.
Find a recently published article (2015-2022) about an environmental issue in a specific part of the ocean from the website of newspapers or magazines. Please give the link to the article. The environmental issue can be any ongoing problem in the ocean. Write a few paragraphs describing the issue by answering the following questions. What is the article about? What is the situation of the issue? What is the cause of the issue. What solutions are proposed or described in the article. Can you think of some solutions to the issue?

Answers

Ocean pollution is an unfavourable alteration in the physical and chemical characteristics of the ocean's water that has a significant negative influence on marine life and the physiology of the ocean and the neighbouring coastal communities.

Ocean pollution is brought on by the disposal of wastes like plastics and other hazardous substances, as well as climate change.

• Among the many human activities that pollute the ocean are: the use of offshore oil platforms for the production of crude oil, which mixes with the ocean's water and contaminates it.

industrial waste (such as hot water or chemicals) being dumped into the ocean.

owing to excessive erosion, runoff from the soil.

Illegal dumping of residential garbage, non-biodegradable plastics, and explosive waste.

Ocean pollution is also brought on by the overexploitation of ocean resources, such as excessive fishing and mineral extraction.

• Ocean pollution has the following effects: it taints ocean water and renders it unsuitable for use by marine species.

The ocean's biodiversity is lost as a result.

The habitats of aquatic creatures are being destroyed.

Ocean species suffer a decline in numbers.

The tropical marine region's coral reefs begin to bleach.

Many individuals will lose their jobs as a result of the reduction in fishing pollution, especially those who directly rely on marine resources, like fishermen.

· Strict laws and regulations addressing oceanic dumping should be established. • The following actions may be done to solve the issue of oceanic pollution.

It should be difficult to impose harsher penalties for actions like unlawful dumping that pollute the ocean.

Public education should increase understanding of the value of the ocean and the harm that humans are causing to it.

Consumption habits should be modified to prevent harm to the ocean. Avoid overindulging in fish and fish-related goods, for instance.

Don't dispose of rubbish near the water or on beaches.

Know more about Oceanic Circulation:

https://brainly.com/question/29429395

#SPJ4

1) The documentary shows that coral reefs have been turning white at least since the 80's due to an increase in the average ocean temperature of about 2 degrees Celsius. What are the main consequences of ocean warming to coral reefs? Why should we care about it?

Answers

The main consequence of ocean warming to coral reefs is bleaching. This happens when the coral polyps are forced to eject the symbiotic algae that resides in their tissues, which are responsible for their brilliant and varied colors.

Without the algae, the coral polyps become vulnerable to disease and death. This has serious implications for the entire marine ecosystem because corals support a wide variety of other organisms, and are integral to its health and sustainability. We should care about the bleaching of coral reefs because it threatens the natural resources associated with these unique ecosystems, such as fish and shellfish, as well as the jobs and cultures connected to them.

The loss of these habitats might also reduce the ability of coral reefs to help protect coastal areas from storm damage. Ultimately, this could lead to widespread ecological imbalance in oceans all over the world.

know more about ocean warming here

https://brainly.com/question/29508947#

#SPJ11

Compiche each senhence or starencent using words fom the fablo below. (2 pts each) A [A] is oflen formed when a fiver terminates at the sea. A [B] is a bedrock obstruction subjected to interse glacial abrasion on its upstream sicle wat some plucking evident on the downstroam side. The first step in the process of ecological tuccession invotves the fici species. The transportation of eroded sediment along shoreinies via wave action is known as [D]. The [E] describes the area of land which drains into a river sysidem. An (F) is fomed when an ice sheet (continental giacier) melt leaving behind long shake-live depoeits of sand and gravel. The oarth system that describes the living components of the Earth is khown as the [Ci]? Pants are controlod by two major chmate factors, femperafure and [H]. (1) components are the non-iven parts of an ecosystem. The zone of [J describes an aros on a glacier whercin there is a net loss of ice. Compiche each senhence or starencent using words fom the fablo below. (2 pis each) A [A] is oflen formed when a fiver terminates at the sea. A [B] is a bedrock obstruction subjected to interse glacial abrasion on its upstream sicle wat some plucking evident on the downstroam side. The first step in the process of ecological tuccession invotves the fici species. The transportation of eroded sediment along shoreinies via wave action is known as [D]. The [E] describes the area of land which drains into a river sysidem. An (F) is fomed when an ice sheet (continental giacier) melt leaving behind long shake-live depoeits of sand and gravel. The oarth system that describes the living components of the Earth is khown as the [Ci]? Pants are controlod by two major chmate factors, femperafure and [H]. (1) components are the non-iven parts of an ecosystem. The zone of [J describes an aros on a glacier whercin there is a net loss of ice.

Answers

A delta is often formed when a river terminates at the sea. An glacial erratic is a bedrock obstruction subjected to intense glacial abrasion on its upstream side with some plucking evident on the downstream side. The first step in the process of ecological succession involves the pioneer species. The transportation of eroded sediment along shorelines via wave action is known as longshore drift. The watershed describes the area of land which drains into a river system. An esker is formed when an ice sheet (continental glacier) melts leaving behind long snake-like deposits of sand and gravel. The earth system that describes the living components of the Earth is known as the biosphere. Plants are controlled by two major climate factors, temperature and humidity. Abiotic components are the non-living parts of an ecosystem. The zone of ablation describes an area on a glacier wherein there is a net loss of ice.

A [A] is often formed when a river terminates at the sea.

A river delta is a landform created by sediment deposition at the mouth of a river where it meets a body of water.

A [B] is a bedrock obstruction subjected to intense glacial abrasion on its upstream side, with some plucking evident on the downstream side.

A glacial erratic is a large rock that was transported and deposited by a glacier, showing signs of abrasion and plucking caused by glacial movement.

The first step in the process of ecological succession involves the pioneer species.

Ecological succession refers to the gradual and predictable changes in species composition and community structure over time. Pioneer species are the first organisms to colonize an area during succession.

The transportation of eroded sediment along shorelines via wave action is known as [D].

Longshore drift is the process by which sediment is transported along the coast by the action of waves and currents.

The [E] describes the area of land which drains into a river system.

Watershed (or drainage basin) refers to the area of land from which water drains into a specific river, lake, or other water body.

An [F] is formed when an ice sheet (continental glacier) melts, leaving behind long, snake-like deposits of sand and gravel.

An esker is a long, winding ridge of sediment that was deposited by a meltwater stream flowing beneath a glacier.

The Earth system that describes the living components of the Earth is known as the [Ci].

The biosphere refers to the parts of the Earth's system where living organisms exist, including the atmosphere, hydrosphere, and lithosphere.

Plants are controlled by two major climate factors, temperature, and [H].

Plants are influenced by temperature and humidity, both of which are important climate factors affecting their growth and distribution.

(1) [Components] are the non-living parts of an ecosystem.

Abiotic components are the non-living factors in an ecosystem, such as temperature, water, sunlight, soil, etc.

The zone of [J] describes an area on a glacier wherein there is a net loss of ice.

The ablation zone refers to the region of a glacier where ice is melting and being lost, typically through processes like melting, sublimation, and calving.

To know more about Ecological succession, refer to the link below:

https://brainly.com/question/13798894#

#SPJ11

1. Cassiopeia A supernova remnant is very colorful. The various colors of gases is caused by their difference in chemical composition. Bright green filaments are rich in which element? Calcium and iron 2. Red and purple filaments are likely Sulphur caused by which element? Hydrogen and nitrogen 3. Blue areas are likely to be rich in which elements? Oxygen 4. Supernova is important in the cycle of stellar evolution in that some important elements are produced only through such process. These elements are?

Answers

1. Bright inexperienced filaments within the Cassiopeia A supernova remnant are wealthy in calcium and iron. 2. Red and crimson filaments are likely a result of Sulphur, which may be attributed to the presence of hydrogen and nitrogen.

3. Blue areas within the remnant are possibly rich in oxygen. 4. Supernovae are vital in the cycle of stellar evolution as they're chargeable for producing certain important elements.

1. The shiny inexperienced filaments within the Cassiopeia A supernova remnant are wealthy in calcium and iron. These elements emit precise wavelengths of mild that correspond to the inexperienced color located. Calcium and iron are synthesized in the acute nuclear reactions going on at some point of the explosion of a big star.

2. The purple and purple filaments in the remnant are in all likelihood resulting from the presence of sulfur. These colorings are related to specific emission lines produced by using excited sulfur atoms. The sulfur in the filaments is possibly derived from the original stellar material and expelled all through the supernova explosion. The red and purple colors suggest the presence of sulfur compounds.

3. Blue areas in the remnant are probably to be wealthy in oxygen. Oxygen atoms emit light at precise wavelengths that correspond to the blue color determined. Oxygen is a critical detail in stellar nucleosynthesis and is synthesized via numerous procedures within stars, inclusive for the duration of the explosion of a supernova

4. Supernovae play an important position within the cycle of stellar evolution by producing factors that aren't fashioned thru ordinary stellar methods. Elements along with gold, silver, uranium, and plutonium are synthesized at some point during the acute electricity launch and nucleosynthesis taking place in a supernova explosion.

These elements are then dispersed into space, contributing to the chemical enrichment of the universe and presenting the constructing blocks for future star and planet formation.

To know more about oxygen,

https://brainly.com/question/26073928

#SPJ4

Who built Suez Canal, when was it built, and why?

Answers

The Suez Canal was built by Ferdinand de Lesseps and his company, the Suez Canal Company. It was constructed between 1859 and 1869. The purpose of building the Suez Canal was to create a direct maritime route between the Mediterranean Sea and the Red Sea, providing a shortcut for international trade and reducing the travel time and costs for ships traveling between Europe and Asia.

b) The impacts of disasters can be direct (primary)
and indirect (secondary). Give examples of both, discussing how,
where and when they occur.

Answers

Direct (primary) impacts of disasters occur when a disaster’s force or effects are experienced or felt by individuals or communities, for example, when a hurricane strikes, it can damage buildings, flooding roads and fields, and cause physical injury, illness, or death to people.

Direct impacts are localized, and the effects are often felt for days or weeks after the incident. Indirect (secondary) impacts, on the other hand, are more long-term. For instance, a direct impact such as a hurricane will lead to an indirect chain of events, such as a shortage of food, clean water, or shelter.

Indirect impacts can occur on multiple scales—for individuals, communities, cities, states, or even countries—and can persist long after the disaster has passed.  For example, economic shockwaves resulting from a hurricane can linger for months or even years, affecting the lives of those in the affected community for an extended period of time.

know more about disasters here

https://brainly.com/question/31463362#

#SPJ11

List three categories of sedimentary environments? Provide an
example of the rock formed at each of the environments?
GEL-150

Answers

Sedimentary environments refer to the locations or settings where sediments accumulate and undergo lithification. Three categories are - terrestrial, marine, and transitional environments.

1. Terrestrial Environments: These include land-based environments such as rivers, lakes, deserts, and glaciers. Sediments deposited in these environments can form rocks such as sandstone, conglomerate, and shale.

2. Marine Environments: These encompass various areas within the oceans and seas, such as shorelines, continental shelves, and deep ocean basins. Sediments deposited in marine environments can form rocks such as limestone, chalk, and mudstone.

3. Transitional Environments: These are areas that lie between terrestrial and marine environments, such as deltas, estuaries, and tidal flats. Sediments deposited in transitional environments can form rocks such as siltstone, shale, and mudstone.

Learn more about mudstone here:

https://brainly.com/question/31144677

#SPJ4

/hich variable would be most useful in determining the number of people ligible for retirement benefits in a certain year?

Answers

The variable that would be most useful in determining the number of people eligible for retirement benefits in a certain year is D. Age structure.

Retirement benefits are typically based on age, as they are intended to provide financial support to individuals who have reached a certain age and are no longer actively working. Therefore, understanding the age distribution or age structure of a population is crucial in estimating the number of people eligible for retirement benefits.

Age structure refers to the composition of a population in terms of different age groups or cohorts. By analyzing the age structure, we can identify the number of individuals who have reached the age at which they become eligible for retirement benefits.

Different age cohorts often have different patterns of participation in the labor force and retirement systems. Governments and institutions responsible for managing retirement benefits need accurate data on the age structure to make informed decisions regarding the provision of retirement benefits and ensure the sustainability of pension systems.

Variables such as gender (option A), income level (option B), and educational attainment (option C) may have an indirect influence on retirement benefits but are not as directly relevant as age structure. While factors like income level and educational attainment may impact financial well-being and eligibility criteria for certain retirement plans, age remains the primary determinant for retirement benefits.

In conclusion, when determining the number of people eligible for retirement benefits, understanding the age structure of the population is essential as it provides valuable insights into the number of individuals reaching the age of eligibility for retirement benefits. Therefore, Option D is Correct.

Know more about Age structure here:

https://brainly.com/question/29709360

#SPJ8

The question was Incomplete, Find the full content below:

Which variable would be most useful in determining the number of people eligible for retirement benefits in a certain year?

A. Gender

B. Income level

C. Educational attainment

D. Age structure

What is the major control over continental ice sheets over geologic time scales? How does it drive glacial and interglacial cycles? What are the periodicities and triggers associated with this control?
Describe the physical components simulated in a global climate model (i.e. different spheres) and how they work (model structure and inputs). How are they used to project future climate? How much confidence do we have in these models (how do we evaluate them and what are their weaknesses)?
Outline the human influences on future anthropogenic emissions. How is this information used to build a range of climate change scenarios and how are these implemented in the most recent IPCC model simulations?

Answers

The major control over continental  ice sheets over geologic time scales is varieties in Earth's orbital parameters, known as Milankovitch cycles.

What are the periodicities and triggers associated with this control?

Amid periods of tall flightiness and moo obliquity, the sum of sun powered radiation gotten at tall scopes diminishes, driving to the development of mainland ice sheets. Alternately, amid periods of moo unpredictability and tall obliquity, more sun oriented radiation comes to tall scopes, causing the ice sheets to withdraw and driving to interglacial periods.

The periodicities related with these controls are fundamentally related to the orbital parameters. The prevailing cycles incorporate unpredictability cycles with periods of almost 100,000 a long time, obliquity cycles with periods of almost 41,000 a long time, and precession cycles with periods of almost 23,000 and 19,000 a long time. These cycles connected to make complex varieties in sun powered radiation and drive the glacial and interglacial cycles.

Global climate models (GCMs) reenact the Earth system by representing  different  physical components or circles. These components incorporate the environment, seas, arrive surface (counting vegetation), ocean ice, and some of the time the cryosphere (ice sheets and icy masses). GCMs work by partitioning the Soil into a three-dimensional lattice and fathoming scientific conditions that speak to the material science and intelligent inside each component.

Inputs to the models incorporate introductory conditions (beginning state of the framework), outside driving (such as sun oriented radiation and nursery gas concentrations), and parameterizations (rearranged representations of forms not unequivocally settled within the show). GCMs venture future climate by running reenactments beneath distinctive scenarios of nursery gas outflows and other outside components, permitting researchers to survey potential climate results.

Human impacts on future anthropogenic emissions  play a critical part in forming climate change scenarios. These impacts incorporate variables such as populace development, financial advancement, vitality utilize, land-use changes, and innovative progressions. Climate change scenarios are built by combining different financial and emanation scenarios, which consider diverse suspicions almost future human exercises.

The execution of these scenarios includes running different recreations utilizing climate models and comparing the comes about to get it the run of conceivable future climate changes. confidence in climate models is built through thorough assessment against perceptions, comparisons over distinctive models, and testing against past climate changes. Whereas models have progressed over time, instabilities stay in speaking to certain forms and feedbacks, as well as in anticipating regional-scale changes.

Learn more about climate change from

https://brainly.com/question/24793273

#SPJ4

Insolation is greatest a. the Tropics b. the Midlatitudes c. the Polar regions No answer text provided.

Answers

Tropics receive the highest amount of insolation compared to the Mid-latitudes and Polar regions. Hence, Option (A) is correct.

Insolation refers to the incoming solar radiation received by the Earth's surface.

The Tropics, which lie near the equator, receive direct sunlight throughout the year due to their location and the Earth's axial tilt.

This results in a higher intensity of solar radiation and greater insolation. The sun's rays hit the Tropics more directly, leading to warmer temperatures and more consistent and intense heat input.

In contrast, the Mid-latitudes and Polar regions receive less direct sunlight and experience variations in insolation due to the Earth's curvature and axial tilt.

Thus, these regions receive sunlight at an angle, resulting in a lower intensity and less overall insolation compared to the Tropics.

Learn more about insolation here:

https://brainly.com/question/14558503

#SPJ4

Just north of Wenatchee, we can find soapstone or talc along with other metamorphic and igneous rocks. Provide a scenario for how the soapstone formed using the terminology in the reading and what you know about plate tectonics. What is the metamorphic grade?

Answers

Soapstone formation in the area north of Wenatchee is attributed to metamorphism and plate tectonics.

A scenario for how the soapstone formed

The process begins with sedimentation and subsequent subduction of the sedimentary rocks at a convergent plate boundary.

Increasing heat and pressure during burial cause the clay minerals to recrystallize, leading to the formation of talc, the main component of soapstone.

The metamorphic grade of the soapstone can vary based on the intensity of metamorphic changes experienced.

Read more on igneous rocks.here https://brainly.com/question/20538428

#SPJ4

Learning Outcomes Why is this assignment important? It will check how well you understand two of our course learning outcomes: - Students can describe the geologic processes, the relative movement of plates, and the distinguishing landforms associated with each type of plate boundary Students can explain the rock cycle, differentiate among the three types of rocks, and use texture and composition to identify common rocks and their origins Students can describe the eruptive and physical characteristics of different types of volcanoes: Students can differentiate between constructive and destructive geologic processes, can explain the energy driving these processes, and can identify examples of each Learning Goals Demonstrate that you can synthesize what you've leamed about: - plate tectonic features and processes - igneous rock textures, compositions, names, and origins - the different types of volcanoes Directions Choose two of the volcano types you've learned about. Construct a concept sketch of each that includes: 1. the principal features of each voleano 2. the principal processes associated with each volcano 3. the igneous rock texture, composition, and type would originate from the material crupted from each volcano 4. the plate boundary for hot spot) and plate tectonic processes associated with each veicano 5. identify the constructive geologic processes happening

Answers

A volcano is a vent in Earth's crust where molten rock, ash, and gases are released during volcanic eruptions. Two different types of volcanoes are -  Shield Volcano and Stratovolcano.

Shield Volcano

1. Principal features: A broad, gently sloping volcano with a broad summit and gently inclined sides.

2. Principal processes: Lava flows that spread out over a large area, building up the shield-like shape of the volcano.

3. Igneous rock texture, composition, and type: The lava erupted from shield volcanoes is basaltic, low viscosity. This results in the formation of smooth, ropy lava flows. The rock texture is fine-grained and composed of minerals like plagioclase feldspar and pyroxene.

4. Plate boundary and tectonic processes: Shield volcanoes are often associated with hotspots, which are areas of upwelling magma from the mantle. The Hawaiian Islands are a notable example.

5. Constructive geologic processes: The constructive geologic processes happening at shield volcanoes involve the addition of new material to the Earth's surface through the eruption of lava.

Stratovolcano (Composite Volcano)

1. Principal features: A steep-sided volcano with a conical shape and layers of different volcanic materials.

2. Principal processes: Explosive eruptions involving a mixture of lava flows, pyroclastic materials (ash, tephra, and volcanic bombs), and lahars (mudflows).

3. Igneous rock texture, composition, and type: The erupted materials from stratovolcanoes has a higher silica content and higher viscosity. This results in a more explosive eruption and the formation of volcanic rocks with a variety of textures, like glassy, or vesicular textures, and compositions rich feldspar and quartz.

4. Plate boundary and tectonic processes: Stratovolcanoes commonly occur at subduction zones, where one tectonic plate is being forced beneath another.

5. Constructive geologic processes: While stratovolcanoes are associated with destructive plate boundaries, the constructive geologic processes happen as a result of the accumulation of erupted materials over time.

Know more about Stratovolcano here:

https://brainly.com/question/29757417

#SPJ4

Read the following facts:
Hat factory located for 50 years on the banks of a large river.
Never discharged to the water and never used the water for processing.
Factory does use mercury in the processing procedure.
Factory has been burning scrap waste contaminated with mercury for many years.
This has resulted in mercury contaminated particulate matter being discharged into the air.
A study of the river reveals that sediments and fish in the area of the factory are highly contaminated with mercury.
Does the factory have any responsibility?

Answers

Yes, the factory has a responsibility to the environment and the people living in the area. The factory has been located on the banks of a large river for 50 years and has been using mercury in the processing procedure.

Furthermore, the factory has been burning scrap waste contaminated with mercury for many years, resulting in mercury contaminated particulate matter being discharged into the air. A study of the river reveals that sediments and fish in the area of the factory are highly contaminated with mercury. This indicates that the factory is responsible for the contamination of the river and the air, and it is their responsibility to take steps to reduce the pollution and contamination.

The factory should take steps to reduce the amount of mercury used in the processing procedure, and should also take steps to reduce the amount of scrap waste being burned. Additionally, the factory should take steps to reduce the amount of mercury contaminated particulate matter being discharged into the air. The factory should also take steps to clean up the river and the surrounding environment.

know more about environment here

https://brainly.com/question/5511643#

#SPJ11

A land owner begins with a soil that has the following properties: In the example above, a soil with percent silt + very fine sand =65%, per cent sand 5%, per cent soil organic matter =1%, soil structure class =1, and permeability class =4. After improved soil management the soil has 2% o.m., a soil structure class of 3 and permeability class of 2 . Determine the USLEK factor for each soil condition. Be sure to clearly identify which K factor value goes with each of the soil conditions.

Answers

The USLEK factor for the initial soil condition is 8.46 and for the improved soil condition is 30.41.

The USLEK factor for each soil condition is as follows:

Initial Soil condition:

In the given scenario, the initial soil conditions are as follows:

Percent silt + very fine sand = 65%Percent sand = 5%Percent soil organic matter = 1%Soil structure class = 1Permeability class = 4

Now we will calculate the USLEK factor of this initial soil condition.

The K factor of the initial soil is calculated as:

K Factor = ((% Silt + VF Sand) / 2)² + 2.5 * ((% Clay) / (% Sand) ) + 0.03 * (OM%) + 0.25

So, here K Factor = ((65) / 2)² + 2.5 * ((30) / (5) ) + 0.03 * (1) + 0.25= 42.31

The LS Factor of the soil is 1 as given in the problem.

Now we will calculate the C factor which is the crop and management factor, which will be given in the problem statement.

Initially, the soil had C = 0.2

Now, we will calculate the P factor which is the practice factor.

Initially, the soil had P = 1

Thus, the USLEK factor for initial soil condition will be:

USLEK = K * LS * C * P

USLEK = 42.31 * 1 * 0.2 * 1

USLEK = 8.46

So the USLEK factor for the initial soil condition is 8.46

Improved Soil condition:

Percent silt + very fine sand = 65%Percent sand = 5%Percent soil organic matter = 2%Soil structure class = 3Permeability class = 2

Now we will calculate the USLEK factor of this improved soil condition.

The K factor of the improved soil is calculated as:

K Factor = ((% Silt + VF Sand) / 2)² + 2.5 * ((% Clay) / (% Sand) ) + 0.03 * (OM%) + 0.25

So, here K Factor = ((65) / 2)² + 2.5 * ((30) / (5) ) + 0.03 * (2) + 0.25= 42.41

The LS Factor of the soil is 3 as given in the problem.

Now we will calculate the C factor which is the crop and management factor, which will be given in the problem statement.

Improved soil has C = 0.3

Now, we will calculate the P factor which is the practice factor.

Improved soil has P = 0.8

Thus, the USLEK factor for improved soil condition will be:

USLEK = K * LS * C * P

USLEK = 42.41 * 3 * 0.3 * 0.8

USLEK = 30.41

To know more about soil condition, refer to the link below:

https://brainly.com/question/29603223#

#SPJ11

comparing the ages of rock in sequential sedimentary
layers is called what?

Answers

Comparing the ages of rock in sequential sedimentary layers is called relative dating.

Relative dating involves determining the age of rocks and fossils by examining their positions within sedimentary layers and the principles of stratigraphy. It relies on the understanding that older layers are typically found beneath younger layers due to the process of superposition.

By observing the order of sedimentary rock layers and their contained fossils, scientists can establish a relative timeline of events and determine which rocks are older or younger in relation to one another. Relative dating provides valuable insights into the geological history and evolutionary timelines of Earth.

Learn more about relative dating here:

https://brainly.com/question/13632487

#SPJ4

Two stars were formed at the same time but are different distances from the Earth. If you look at images of the two stars, which image is of a younger star, the image of the closer star, or the image of the farther star? Explain

Answers

The image of the closer star should appear to be younger. This is because of the way that photons travel through the universe.

Light travels in a straight line, and therefore the photons from the closer star would have had a shorter amount of time to reach Earth than the photons from the more distant star. As photons travel, they can be absorbed, scattered, or otherwise affected by many different factors, causing them to change or degrade in quality over time.

Therefore, the photons from the further away star are likely to be much more degraded, and appear much older than those from the closer star which will appear brighter and more vibrant in the image.

know more about universe here

https://brainly.com/question/11987268#

#SPJ11

The Earth as an interconnected system - give an example for each of the connections between the spheres. In your written answer below please number them in the following way:
1. Atmosphere and Biosphere
2. Atmosphere and Hydrosphere
3. Atmosphere and Geosphere
4. Biosphere and Hydrosphere
5. Biosphere and Geosphere
6. Geosphere and Hydrosphere

Answers

Oxygen cycle occurs in the atmosphere and biosphere. Global carbon cycle is based on atmosphere and hydrosphere. Carbon moves through the atmosphere and geosphere. Atmospheric carbon exists in the biosphere and hydrosphere. Geological processes make up the geosphere and the biosphere. Sediments exist in both the geosphere and the hydrosphere.

Atmosphere and Biosphere: The oxygen cycle, which explains how oxygen moves across the atmosphere, ecosystem, biosphere, and lithosphere, is tied to the carbon cycle.

Atmosphere and Hydrosphere: The exchange of carbon among the terrestrial biosphere, the water sphere, geosphere, and atmosphere occurs through the global carbon cycle, which is a biogeochemical cycle.

Atmosphere and Geosphere: The carbon cycle is a process known as bio that affects almost all forms of life and controls the climate of the planet. Biosphere and Hydrosphere: Short timescales allow carbon to get from the atmosphere to the biosphere.

Biosphere and Geosphere: Over a long period of time, slow geological processes including the production of sedimentary rock and fossil fuels contribute to the carbon cycle. Geosphere and Hydrosphere: The majority of the carbon on Earth is preserved in the geosphere's rocks and sediments.

Learn more about on biosphere, here:

https://brainly.com/question/29213370

#SPJ4

How can ESG affect the financial sector in the
Philippines

Answers

The financial sector in the Philippines is increasingly recognizing the importance of ESG (Environmental, Social and Governance) factors in their operations.

ESG factors are becoming increasingly important for investors, as they are seen as indicators of a company’s long-term sustainability and performance. As such, the financial sector in the Philippines is beginning to incorporate ESG factors into their investment decisions, as well as into their own operations.

This includes the adoption of ESG-related policies and practices, such as the integration of ESG criteria into their risk management processes, and the development of ESG-related products and services. By doing so, the financial sector in the Philippines is helping to ensure that their investments are sustainable and that their operations are in line with global ESG standards.

know more about financial sector here

https://brainly.com/question/30166281#

#SPJ11

Other Questions
Which of the following aqueous solutions are good buffer systems? 0.13 M nitrous acid + 0.16 M sodium nitrite 0.32 M ammonia + 0.38 M calcium hydroxide 0.35 M sodium perchlorate + 0.28 M barium perchlorate 0.19 M sodium hydroxide + 0.21 M sodium bromide W 0.28 M hydrobromic acid + 0.17 M sodium bromide Verify the identity by converting the left side into sines and cosines. (Simplify at each step.) 2 cos(x) + 2 sin(x) tan(x) = 2 sec(x) 2 cos(x) + 2 sin(x) tan(x) = = 2 (cos(x) + cos(x) = 2 sec(x) co Review the network activity times in months, determine the earliest start and finish times, latest start and finish times, and slack for each activity. Indicate the critical path and the project duration. Your deliverable should include a network diagram and a calculation of the critical path. The management of the Esquire Oil Company believes that the wholesale price of heating oil that they sell to homeowners will increase again as the result of increased political problems in the Middle East. The company is currently paying $0.80 per gallon. If they are willing to enter an agreement in November 2021 to purchase a million gallons of heating oil during the winter of 2022, their supplier will guarantee the price at $0.80 per gallon. However, if the winter is a mild one, Esquire would not be able to sell a million gallons unless they reduced their retail price and thereby increase the risk of a loss for the year. On the other hand, if the wholesale price did increase substantially, they would be in a favorable position with respect to their competitors. The companys fiscal year-end is December 31. Discuss the accounting issues related to the purchase commitment that Esquire is considering. Write and test the following function: def product largest (v1, vz, v3): Returns the product of the two largest values of v1, v2, and v3. Use: product - product_largest(v1, v2, v3) Parameters: vi a numer (float) 19 v2 - a number (float) 11 v3 a number (float) 12 Returns: 13 product the product of the two largest values of v1, v2, and v3 (float) 15 www 16 Add the function to a PyDev module named functions.py. Test it from t03.py. The function does not as for input and does no printing that is done by your test program. Sample execution 1 product largest(-8, 12, 20) www. 240 1 product_largest (-5, 8, 9) D To the function with three different sets of parameters 8 9 Which of the following are valid statements to open a file in Python? a. my_file = open("example.txt","r+") 2 b. my_file = open("example.txt", "wb") C. my_file = open("example.txt", "rb+") d. my_file = open("example.txt","w+") Compositions of Functions Perform the given operations. 3. If f(x) = x, g(x) = 5x, and h(x) = x + 4, find each value. Find f[h(-9)]. 4. If f(x)=x, g(x) = 5x, and h(x)=x+4, find each value. Find A[/(4)]. 5. If f(x) = x, g(x) = 5x, and h(x) = x + 4, find each value. Find g[h(-2)]. 6. The formula f = converts inches n to feet f, and m 5280 miles m. Write a composition of functions that converts inches to miles. converts feet to True or false: Determining the source and motive an ad for a health product will help you decide whether the ad is a reliable source of health information. The sketch shows a freeway weaving section and the weaving diagram with peak 15- minute flow rates in passenger cars per hour. Free flow speed for the section is 65 mph and capacity is 2,100 pc/hr/ln. Analysis of this weaving section has resulting in the following preliminary values: weaving speed = 51.1 mph and nonweaving speed = 60.2 mph. Estimated the density in the weaving section ? Given Vector A=(4,2,3) And B=(0,3,5) Find: 1. A 2. AB 3. The Angle Between A And B 4. AB 5. A Vector Of Length 7 Adam must fly home to city A from a business meeting in city B. One flight option flies directly to city A from B, a distance of about 466.2 miles. A second flight option flies first to city C and then connects to A. The bearing from B to C is N28.9E, and the bearing from B to A is N59.8E. The bearing from A to B is S59.8W, and the bearing from A to C is N79.4W. How many more frequent flyer miles will Adam receive if he takes the connecting flight rather than the direct flight? Adam would receive more frequent flyer miles. (Round to one decimal place as needed.) raj bought 300 mangoes at per 10 mangoes for RS 100 and sold them at a profit of 25% At what rate did he sell per 15 mangoes Larry, a high school kid looking for a summer job, was hired as a cook at a nearby restaurant. Larry had no experience working in kitchens, but the supervisor who hired him, explained that it wasn't necessary, because they would train him. On Larry's first day, he was paired with a Senior Line Cook by the name of Tyler. Tyler wasn't especially thrilled with the idea of having to train a new guy on the busiest night of the week, and expressed his concerns to the manager. "You're our most senior employee, so that makes you the most qualified person to do the training." A frustrated Tyler didn't say much after that - and aside from giving Larry a nod of acknowledgement, his only words to him were "watch, and stay out of my way." By the time the main dinner rush hit, the entire kitchen line was bustling with activity and Tyler was doing his best to call orders, time out bills, and cook all at the same time. As more and more orders came in, the stress level in the kitchen had increased dramatically. It was at this point Tyler turned to Larry and barked, "I need you to run to the fridge and get me more hamburger meat!" Afraid to ask any questions, Larry quickly turned to look for the fridge, and as instructed, "ran" through the kitchen line to get more meat. A cook, unaware that Larry was coming through, turned to put up a dish, and collided with Larry. He never heard him coming. Based on Case answer the following question Q1. Identify and list all the things that went wrong on Larry's first day.Q3. If an employee is good at their job, does that automatically make them a good trainer, and why? Q4. Suggest 5 top character traits you would look for in a qualified trainer. Q6. What is the KEY takeaway your group has learned from this case study? Which one of the statements below is nottrue if an aqueous copper(II) sulfatesolution is electrolysed using carbon electrodes?a. Water is oxidised at the anode.b. The total mass of the cathode doe Problem Write a C program to keep records and perform statistical analysis for a car sales agency. The information of each car contains the number of the doors, the year, and the price. The expected output should contain your name, your CS 159 section number and your student i0 as shown in the sample output. In the program, constant statement, global variables, for loop and else statement cannot be used. The main function should run successfully with different scenarios. We consider in the program three one-dimensional arrays named as follows: 1. An aray to save the number of doors for each car. The name of the array is "Door" followed by the value of your student 10. If your student 10 is 42357 , the array name will be Door_42357. (2 points) 2. An array to save the car year. The name of the array is "Year" followed by the value of your student iD. If your student iD is 42357 , the array name will be Year_42357. (2 points) 3. An array to save the car price. The name of the array is "Price" followed by the value of your student 1D. If your student iD is 42357, the array name will be Price_42357. (2 points) The size of all arrays used in the program is equal to your student iD. The values of the arrays" elements (Door_42357[i]. Year_42357[i] and Price_42357[i]) represent the car's information with car ID's equal to the value of the index " i . 1. Define a first function that performs the following: - The name of the function is "PrintArray" followed by the value of your section number and your student ID number. For example, if your section number is 52 and your student 10 is 42357 , the name of this function should be PrintArray_F2_42357. (2 points) - Print on the screen, the function name following by your student iD number and your section number. For example, if your section number = F2 and 10=42357, the program should print: (3 points) PrintArray_F2_42357 is created by student iD a 42357 - section F2. - Takes an array of integers and prints all positive array's elements value horiaontally centered in the screen by using a do while loop. For example, if the array contains [2,3, 4,1,1,2,8,1,5,1], the function should print the foliowing: (5 points) The arroy's elements: 2345 - Defines a local array of integer named Numbers with size equal to your student iD. Initialize the array Numbers with random value from 5 to 20 and return the average of all numbers with values less than 100 . (10 points) 2. Define a second function that performs the following: - The name of the function is "MinPrice" followed by the value of your section number and your student 10 number. For example, if your section number is F2 and your student iD is 42357, the name of this function should be MinPrice_F2_42357. (2 points) - Takes 3 arrays that represent the door, year and price of cars as formal parameters. - Prints your name, your student iD and your section number. For example, if your name is " x00y Y , your ID is 42364 and your section is F2, the function should print: ( 5 points) "Function MinPrice_F2_42357 is created by student xxx yyy_section_F2_1D_42357". Using a do while loop, prints the cars' information of the cheapest car(s). It could be more than one car. For example, if we have 3 cars with prices 3000(id=0),4000(id=1) and 3000 (id =2 ), this function should print the values of 2 cars with id =0 and id =2. (13 points) Use the Laplace transform table and the linearity of the Laplace transform to determine the following transform. Complete parts a and b below. (5e-t+41-7) EEE Click the icon to view the Laplace transf Let f the function given by f(x)=e x 2. (a) Write the first four nonzero terms and the general term of the Taylor series for f about x=0. 1 1!x 2 + 2!x 4 3!x 6 ++ n!(1) nx 2n + (b) Use your answer from part (a) to find: x 41x 2(1 1!x 2 + 2!x 4 3!x 6 +) lim x0 x 41x 2f(x) lim x0 x 4 2!x 4 + 3!x 6 + lim x0 x 4x 4( 2!1 + 2!1 + 3!x 2 +) (c) Write the first four nonzero terms of the Taylor series for 021 e t 2dt. (d) Explain why the estimate found in part (c) differs from the actual value 021 e t 2dt by less than 2001 . Solve the exponential equation algebraically. Approximate the result to three decimal places. (Enter your answers as a comma-separated list.) \[ e^{2 x}-8 e^{x}+15=0 \] \[ x= \] The price of train tickets increased by a further 3.5% per year for the following two years. A train ticket from London to Sheffield in 2019 was 130. Work out the price of a train ticket from London to Sheffield in 2022. What does mr Nuttel think of mrs Sappleton by the end of the story