The algebraic expression that shows the amount Ms. Jackson wants to rent a van for a week is T=320+0.50m
In order to calculate the total amount that Ms. Jackson will need to pay for renting we need to multiply the number of miles that she will drive by the price per mile driven.
Once we have that product we can simply add the weekly fee (w) to it which will give us the total (T) amount that Ms. Jackson will have to pay for her trip. This can all be combined into the following formula.
T = w + 0.50m
As per the mentioned table, a van containing ret for a week is 320, which is equal to the W value, then substitute the value in the equation we get:
T=320+0.50m
To know more about the algebraic expression:
https://brainly.com/question/20849199
#SPJ4
Use the origin as the center of dilation and the given scale factor to find the coordinates of the vertices of the image of the polygon. k=1/2
The vertices of the polygon before and after dilation are shown below
preimage Image
J (-5, 3) J' (-5/2, 3/2)
K (2, 3) K' (1, 3/2)
L (2, -3) L' (1, -3/2)
M (-5, -3) M' (-5/2, -3/2)
What is dilation?Dilation is a method of transformation that magnify or shrink the preimage depending on the scale factor
The rule used in transformation is as follows
(x, y) for a scale factor of r → (rx, ry)
Applying the rule to the vertices of the polygon we have
preimage Image
J (-5, 3) (1/2 * -5, 1/2 * 3) J' (-5/2, 3/2)
K (2, 3) (1/2 * 2, 1/2 * 3) K' (1, 3/2)
L (2, -3) (1/2 * 2, 1/2 * -3) L' (1, -3/2)
M (-5, -3) (1/2 * -5, 1/2 * -3) M' (-5/2, -3/2)
Learn more about dilation at:
https://brainly.com/question/30239118
#SPJ1
A line passes through the points (–1, –5) and (4, 5). the point (a, 1) is also on the line. a coordinate plane. what is the value of a? –2 –1 1 2
The value of a is 2
We can use the slope-intercept form of a line, y = MX + b, to find the equation of the line.
The slope (m) of the line can be found using the following formula:
m = (y2 - y1) / (x2 - x1)
where (x1, y1) and (x2, y2) are the coordinates of two points on the line.
So, m = (5 - (-5)) / (4 - (-1)) = 10/5 = 2
Now, we can use the point-slope form of a line, y-y1 = m(x-x1)
where (x1,y1) is any point on the line and m is the slope of the line.
In this case, we will use the point (x1, y1) = (–1, –5)
so, y-y1 = m(x-x1) = -5 - 2(-1-x) = -5-2+2x
Now we know that the point (a,1) is also on the line, we can substitute the value of x and y in the equation
so, 1 - (-5) = 2(a - (-1))
1 +5 = 2a+2
6 = 2a+2
4 = 2a
a = 2
Therefore, the value of a is 2.
Learn more about linear equations in two variables and slopes of lines in the coordinate plane here: https://brainly.com/question/7385537
#SPJ4
Select 2 points in the solution of the inequality graphed below.
654-
21
3
x
k
a telephone company charges $0.50 for the first 5 minutes of a call and $0.09 for each additional minute. which interval below represents how a person can talk for $3 (assume that a person cannot talk for a fraction of a minute)?
On solving the provided question, we can say that by equation 15+4 = total minutes, they can talk 19 minute
What is equation?An equation is a mathematical formula that connects two assertions using the equal sign (=) to denote equivalence. In algebra, an equation is a mathematical statement that establishes the equivalence of two mathematical expressions. For instance, an equal sign separates the components 3x + 5 and 14 in the equation 3x + 5 = 14. A mathematical formula is used to explain the connection between two sentences on either side of a letter. Frequently, there is just one variable, which is also the symbol. for example, 2x - 4 = 2.
x= total minutes -4 the 1st 4 minutes are included in the .30
total cost = .3 + .18 x
[tex]3 = .3 +.18 x\\2.7 = .18x\\2.7/.18 = x\\15 = x[/tex]
x = total minutes -4
15+4 = total minutes
they can talk 19 minute
To know more about equation visit:
https://brainly.com/question/649785
#SPJ4
What is the name of the segment inside the large triangle?
perpendicular bisector
altitude
median
angle bisector
Answer:
Perpendicular Bisector
What transformation(s) have been applied to function f(x) to get g(x)? Check all that apply.translationreflectiondilationrotation
Transformations that have been applied to function f(x) to get g(x) are translation, reflection, and dilation.
The process of transforming the existing graph or graphed equation, to create a variation of the following chart is called graph conversion. Transformations such as translation, reflection, and dilation have been applied to function f(x) to produce g(x).
Whenever the function is "translated" it is moved in such a very way that it will not alter the shape or rotate in any way.The reflection is a modification of the function's graph all along the x or y-axis (or both).Dilation is defined as a stretch or shortening about in an axis caused by multiplying or subdivisions.Therefore, the answer is "translation , reflection , and dilation".
To learn more about transformation of graphs, visit the link:
brainly.com/question/12202719
#SPJ4
Answer:
A) Translation
B) Reflection
C) Dilation
Step-by-step explanation:
How do I do this please
Answer:
Step-by-step explanation:
substitute p for 8, because p=8
question 1 : 8+4=12 ----Yes
question 2: 8x8 =64-------Yes
question 3 5x8=35, not 8----No
question 4 2+8=10, not 12----No
please help me find this answer!
Answer:
[tex]k { { { {y6444396}^{46446?} }^342{?} }^66 {6 { { {6636163 \\ }^{2} }^{2} }^{2} }^{2} {?} }^{?} \times \4166441frac{?}{?} [/tex]
Step-by-step explanation:
djdkkwkwnsjididjfjrje
If the points (2, 5), (1, 1) and (a, 3) are collinear, find the value of a.
Answer:
a = 0
(0,3)
Step-by-step explanation:
brainly The linear functions f(x) and g(x) are represented on the graph, where g(x) is a transformation of f(x): Part A: Describe two types of transformations that can be used to transform f(x) to g(x). (2 points) Part B: Solve for k in each type of transformation. (4 points) Part C: Write an equation for each type of transformation that can be used to transform f(x) to g(x). (4 points) Source StylesFormatFontSize
Two types of transformations that can be used to transform f(x) to g(x) are horizontal and vertical stretching/shrinking.
What is transformation ?
A transformation is a function that changes the position, size, or shape of an object or a graph. In mathematics, transformations are often used to map a function from one coordinate space to another. There are several types of transformations, including translations, rotations, reflections, and scalings.
Part A: Two types of transformations that can be used to transform f(x) to g(x) are horizontal and vertical stretching/shrinking.
Part B:
Horizontal stretching/shrinking: k is the horizontal scale factor.
Vertical stretching/shrinking: k is the vertical scale factor.
Part C:
Horizontal stretching/shrinking: g(x) = f(kx)
Vertical stretching/shrinking: g(x) = kf(x)
Two types of transformations that can be used to transform f(x) to g(x) are horizontal and vertical stretching/shrinking.
To learn more about transformation visit : brainly.com/question/11709244
#SPJ4
describe the possible lengths of the third side of the triangle given the lengths of the other two sides. 15 inches, 37 inches
The possible length of the third side of the triangle is x>52 inches.
What is the sum of the first side and second side of any triangle?The sum of the lengths of any two sides of a triangle is always greater than the length of the third side. If the sum of the two sides is equal to the third side, then the two sides will coincide with the third side so a triangle cannot be formed. Hence, the sum of the two sides must be greater than the third side for the triangle to be formed.
Given: Sides of two sides of a triangle as 15 and 37 inches.
let the third side of the triangle be x.
then x>15+37
x>52 inches.
Hence, The possible length of the third side of the triangle is x>52 inches.
Learn more about triangles here:
https://brainly.com/question/2456591
#SPJ1
you have been told to reduce your department by 15%. your department has 220 workers. there are 512 workers in the whole company. how many workers must be let go (round to the nearest worker)?
To reduce your department by 15%, you would need to let go of 33 workers.
Reducing a department by 15% means that 15% of the current workforce in that department will be let go. To calculate this, you first need to determine the percentage of the total workforce that your department represents. In this case, your department has 220 workers out of 512 workers in the whole company, which represents 43% of the total workforce.
Then, you can calculate the number of workers that need to be let go by multiplying the total number of workers in your department by the percentage that needs to be cut. In this case, that would be
220 x 0.15 = 33 workers
This means that 33 out of the 220 workers in your department would need to be let go in order to achieve a 15% reduction.
To know more on percentage
https://brainly.com/question/29763752
#SPJ4
An earthworm was in the soil 9 inches below the surface. To find moister soil, it moved down 7 inches.
What is the position of the earthworm now relative to the surface?
inches
Using the addition operation, the position of the earthworm relative to the surface is 16 inches below the surface.
What is the addition operation?One of the four basic mathematical operations, including subtraction, division, and multiplication, is the addition operation.
Using the addition operation involves adding two or more addends to determine the sum. It also involves using the addition operand (+) and the equal symbol (=).
The initial position of the earthworm below the surface = 9 inches
The depth it moved down to find moister soil = 7 inches
The current position = 16 inches (9 + 7) below the surface.
Thus, based on the addition operation, the earthworm is 16 inches below the surface in its endless search for moister soil.
Learn more about mathematical operations at https://brainly.com/question/4721701
#SPJ1
After its second bounce, a ball reached a height of 80 cm. The rebound factor for the ball was 0.7. From approximately what height, in cm, was the ball dropped?
A) 34
B) 49
C) 115
D) 163
Answer: The answer is C hope this helps :)
Step-by-step explanation:
The approximate height of the ball from where it is dropped will be 115 cm. Then the correct option is C.
What is Algebra?Algebra is the study of abstract symbols, while logic is the manipulation of all those ideas.
The definition of simplicity is making something simpler to achieve or grasp while also making it a little less difficult.
The height of a ball after its second bounce was 80 cm. The ball had a rebound factor of 0.7. Then the height of the ball from where it is dropped is given as,
0.7h = 80
h = 80 / 0.7
h = 14.3 cm
h ≈ 115 cm
The approximate height of the ball from where it is dropped will be 115 cm. Then the correct option is C.
More about the Algebra link is given below.
https://brainly.com/question/953809
#SPJ2
Coins are placed into a treasure chest, and each coin has a radius of 1.6 inches and a height of 0.0625 inches. If there are 170 coins inside the treasure chest, how many cubic inches of the treasure chest is taken up by the coins? Round to the nearest hundredth and approximate using π = 3.14.
341.63 in3
106.76 in3
85.41 in3
0.50 in3
85.41 cubic inches of the treasure chest is taken up by the coins
What is Three dimensional shape?a three dimensional shape can be defined as a solid figure or an object or shape that has three dimensions—length, width, and height.
Remember that the volume of a cylinder is given by:
volume = (height)×pi×(radius)²
Where pi = 3.14
Then here the volume of each coin is:
V = (0.0625)(3.14)(1.6)²
= 0.5024 in³
And there are 170 coins, so the total volume is:
170×0.5024
85.408 in³
85.41 in³
Hence, 85.41 cubic inches of the treasure chest is taken up by the coins
To learn more on Three dimensional figure click:
https://brainly.com/question/2400003
#SPJ1
Answer:
c or 85.41
Step-by-step explanation: its simple
An Isoceles right triangle whose legs measure 6 is continously rotated about one of its legs to form a three-dimensional object. The three-dimensional object is a what?
Assuming an isosceles right triangle whose legs measure 6 is continuously rotated about one of its legs to form a three-dimensional object, the three-dimensional object is a: D. cone with a diameter of 12.
What are the types of triangle?In Geometry, there are five (5) major types of triangle based on the length of their sides (side lengths) and angles, and these include the following;
Equilateral triangleScalene triangleIsosceles triangleObtuse triangleRight-angled triangleWhat is a right angle?In Mathematics, a right angle can be defined as a type of angle that is formed by the intersection of two (2) straight lines at 90 degrees (90°).
Generally speaking, the resulting three-dimensional (3-D) geometric object that is formed when a right-angled triangle is continuously rotated about a leg would be a cone. Additionally, the radius of this cone would be equal to 6 because the base of the right-angled triangle is 6.
Therefore, the diameter of this cone can be calculated as follows;
Diameter of cone = 2 × radius of cone
Diameter of cone = 2 × 6
Diameter of cone = 12 units.
Read more on right angle here: brainly.com/question/28453423
#SPJ1
Complete Question:
An isosceles right triangle whose legs measure 6 is continuously rotated about one of its legs to form a three-dimensional object. The three-dimensional object is a
answer choices
cylinder with a diameter of 6
cylinder with a diameter of 12
cone with a diameter of 6
cone with a diameter of 12
if you ate 2.5 cups of this particular cereal, how many calories and grams of fiber would you be consuming?
On solving the provided question, we can say that by linear equation we have 2.5x * cereals = y
What is a linear equation?A linear equation is one that has the form y=mx+b in algebra. B is the slope, and m is the y-intercept. It's usual to refer to the previous clause as a "linear equation with two variables" because y and x are variables. The two-variable linear equations known as bivariate linear equations. There are several instances of linear equations: 2x - 3 = 0, 2y = 8, m + 1 = 0, x/2 = 3, x + y = 2, and 3x - y + z = 3.
2.5 cups of this particular cereal,
the following linear equation, you could calculate how many calories and grams of fiber you were eating.
let x = cereals we eat y = calories
so, equation - 2.5x * cereals = y
To know more about linear equation visit:
https://brainly.com/question/11897796
#SPJ4
What is the solution to the equation StartFraction y Over y minus 4 EndFraction minus StartFraction 4 Over y + 4 EndFraction = StartFraction 32 Over y
The solutions to the equation y/ (y- 4) - 4/ (y + 4) = 32/ y are approximately 30.948, 4.627 and -3.575.
The given equation is y/ (y- 4) - 4/ (y + 4) = 32/ y
Let us simplify the left hand side (LHS) :
Make the denominator same to (y - 4)(y + 4)
y/ (y- 4) - 4/ (y + 4) = (y/ (y- 4))×((y + 4)/(y + 4)) - (4/ (y + 4))×((y - 4)/(y - 4))
y/ (y- 4) - 4/ (y + 4) = ( y(y + 4) - 4(y - 4))/ (y - 4)(y + 4)
y/ (y- 4) - 4/ (y + 4) = (y² + 4y - 4y + 16)/ (y² - 16)
y/ (y- 4) - 4/ (y + 4) = (y² + 16)/ (y² - 16)
Now plugging this simplified version in LHS
(y² + 16)/ (y² - 16) = 32/ y
y(y² + 16) = 32(y² - 16)
y³ - 32y² + 16y + 32×16 = 0
The solutions are approximately 30.948, 4.627 and -3.575.
To know more on cubic polynomial
https://brainly.com/question/1417425
#SPJ4
What transformation is happening
Answer:
Probably c: f(x) = y + 3
Step-by-step explanation:
See attached worksheet
Given the polynomial Q(x)=4x^3-3x+1, find the polynomial P(x) such that P(x)=2*(Q(x)+P(x)) for any real number x
Given the polynomial Q(x)=4x^3-3x+1,
P(x) = 8x^3 - 6x + 2
What is the polynomial?Generally, To find P(x), we can start by substituting
P(x) = 2*(Q(x) + P(x)) into the equation:
P(x) = 2*(Q(x) + P(x))
This simplifies to:
P(x) = 2*(4x^3 - 3x + 1 + P(x))
Expanding and rearranging the equation gives:
P(x) = 8x^3 - 6x + 2 + 2P(x)
Subtracting 2P(x) from both sides of the equation gives:
P(x) - 2P(x) = 8x^3 - 6x + 2
This simplifies to:
-P(x) = 8x^3 - 6x + 2
Adding P(x) to both sides of the equation gives:
0 = 8x^3 - 6x + 2 + P(x)
Therefore, the polynomial P(x) that satisfies the equation
P(x) = 2*(Q(x) + P(x)) is:
P(x) = 8x^3 - 6x + 2
Read more about polynomial
https://brainly.com/question/11536910
#SPJ1
Write an equation involving absolute value for the following graph:
Answer:
|1|
Step-by-step explanation:
Because absolute value measures the positive distance from the numeral to 1, the answer could be negative or positive one, which is what the graph shows. So, |1| is the answer.
four horizontal lines and four vertical lines are drawn in a plane. in how many ways can four lines be chosen such that a rectangular region is enclosed?
Four lines be chosen from four horizontal lines and four vertical lines in a plane such that a rectangular region is enclosed in 36 ways.
The four horizontal lines can be chosen in 4 choose 2 = 6 ways because we have to pick 2 out of 4, and the four vertical lines can be chosen in 4 choose 2 = 6 ways as well as
4C2 = 4!/ (2!×2!)
4C2 = 6
The total number of ways to pick four lines that enclose a rectangular region is 6×6 = 36, where each combination of two horizontal lines and two vertical lines forms a rectangle.
It's important to notice that the order of choosing the lines doesn't matter, so we use the combination formula (nCr) instead of permutation formula (nPr).
To know more on combination problem
https://brainly.com/question/29110744
#SPJ4
Let f(x) = x³ + 2x² + 7x - 11 and g(x) = 3f(x). Which of the following describes g as a
function of f and gives the correct rule?
A.) horizontal compression; g(x) = 3x³ + 6x² + 21x - 33
B.)horizontal stretch; g(x) = 27x3 + 18x² +21x - 11
C.)vertical stretch; g(x) = 3x3 + 6x² +21x - 33
D.)vertical compression; g(x) = 27x³ + 18x² + 21x - 11
Therefore , the solution of the given problem of function comes out to be the function f(x) = x³ + 2x² + 7x - 11 = -1 and g(x) = 3f(x) = -3
what is function?The subject of mathematics includes quantities and their variations, equations and related structures, shapes and their locations, and places where they can be found. The term "function" refers to the relationship between a set of inputs, each of which has an associated output. A connection between inputs and outputs in which each input leads to a single, distinct result is known as a function. Each function is given a domain and a codomain, or scope.
Here,
Given:
we have been provided with -
f(x) = x³ + 2x² + 7x - 11
so, x = 1
f(x) = 1 +2 +7 -11= -1
g(x) = 3f(x) = -3
Therefore , the solution of the given problem of function comes out to be the function f(x) = x³ + 2x² + 7x - 11 = -1 and g(x) = 3f(x) = -3
To know more about function visit:
brainly.com/question/28193995
#SPJ1
[(1/15−2/5)⋅(−3/4)³]÷(−9)
Answer:
[tex]-\frac{1}{64}[/tex]
Step-by-step explanation:
We have:
[tex][( \frac{1}{15} - \frac{2}{5}) * (-\frac{3}{4})^{3}] / (-9)[/tex]
Now, we will multiply the second fraction in the first parentheses by [tex]\frac{3}{3}[/tex] so we can subtract it from the [tex]\frac{1}{15}[/tex]. Then, we will multiply all of the [tex]\frac{3}{4}[/tex]'s. This gives us:
[tex][( \frac{1}{15} - \frac{2}{5} * \frac{3}{3} ) * (-\frac{3}{4} * -\frac{3}{4} * -\frac{3}{4})] / (-9)[/tex]
Which simplifies to:
[tex][( \frac{1}{15} - \frac{6}{15} ) * (-\frac{27}{64})] / (-9)[/tex]
Simplifying:
[tex][(-\frac{5}{15} ) * (-\frac{27}{64})] / (-9)[/tex]
Multiplying in our brackets gives us:
[tex]\frac{9}{64} / (-9)[/tex]
Now, using the rule of KCF (Keep, Change, Flip), we will keep our first fraction, change our division sign to a multiplication sign, and make the last number its reciprocal. This gives us:
[tex]\frac{9}{64} * -\frac{1}{9} = -\frac{1}{64}[/tex]
So, the equation simplified is [tex]-\frac{1}{64}[/tex].
Hope this helped!
the three sides of a triangular lot are represented by x, 2x, and 3x 2. what are the lengths of each side if the perimeter of the triangular lot is 362 feet? 60 ft, 120 ft, 182 ft 100 ft, 122 ft, 140 ft 60 ft, 60 ft, 242 ft 80 ft, 100 ft, 182 ft
On solving the provided question we can say that any triangle's perimeter is the sum of its three sides' lengths = [tex]\x = 360/6 = > x = 60[/tex]
What is triangle?A triangle is a polygon since it has three sides and three vertices. It is one of the basic geometric shapes. The name given to a triangle containing the vertices A, B, and C is Triangle ABC. A unique plane and triangle in Euclidean geometry are discovered when the three points are not collinear. Three sides and three corners define a triangle as a polygon. The triangle's corners are defined as the locations where the three sides converge. 180 degrees is the result of multiplying three triangle angles.
Triangle's sides are x, 2x, and 3x Plus 2 ft. Respectively.
Radius is 362 feet.
Any triangle's perimeter is the sum of its three sides' lengths.
[tex]362 = x + 2 x + 3x +2\\6 x +2=362\\6 x= 362-2\\6 x=360\\x = 360/6\\x = 60[/tex]
Triangle's shortest side measures 60 feet.
Middle side = 2 x 2 x 60 ft = second side
Third side equals 3 x + 2 and is measured as 360+2=180+2=182 ft.
To know more about triangle visit:
https://brainly.com/question/2773823
#SPJ4
The top of a square table is covered with four equal square tiles. If the side length of each tile is decreased by 75% , how many tiles of the new size would be needed to cover the same table?
Answer:
16
Step-by-step explanation:
The side lengths of the original square was 2. 2 x 2 = 4
.25 x 2 = .5
The squares are now 1/2 x 1/2. One of the 4 original squares will now need 4 new smaller size squares to cover the one square.
4 x 4 = 16
Select the parallel lines from the given pairs of lines :
Select one:
a.
y = x / 3 + 11, y = x / 2 + 15
b.
y = 3x + 11, y = 3x + 15
c.
y = 3x + 11, y = − 3x + 15
d.
y = 3x + 11, y = x / 2 + 15
Answer:
b.
y = 3x + 11, y = 3x + 15
Step-by-step explanation:
Both lines have the same slope, so they are parallel.
Can anyone please help me?
Answer: C. 3
Step-by-step explanation:
Using the trapezoid midsegment theorem,
[tex]\frac{4x+8x+3}{2}=4x+7.5\\\\\frac{12x+3}{2}=4x+7.5\\\\12x+3=8x+15\\\\4x+3=15\\\\4x=12\\\\x=3[/tex]
a food delivery service manager would like to estimate the mean amount of time it takes employees of his company to deliver food to the customers. to do so, he selects a random sample of 10 deliveries from the large number of deliveries made and records the amount of time each of those deliveries took. are the conditions for constructing a t confidence interval met?
Answer: C
Step-by-step explanation:
Yes, the conditions for constructing a t confidence interval are met. The sample size is 10, which is greater than 30, and the sample is a random sample of 10 deliveries from a large number of deliveries made.
1. Constructing a t confidence interval requires that the sample size is greater than 30, so the first condition that must be met is that the sample size is greater than 30.
2. The second condition that must be met is that the sample is a random sample of the population of interest. In this case, the sample is a random sample of 10 deliveries from a large number of deliveries made.
Since both conditions are met, the conditions for constructing a t confidence interval are met.
Yes, the conditions for constructing a t confidence interval are met. The sample size is 10, which is greater than 30, and the sample is a random sample of 10 deliveries from a large number of deliveries made.
Learn more about sample here
https://brainly.com/question/25894237
#SPJ4
A region satisfies the inequalities 2 ≤ x ≤ 6 and 3 ≤ y ≤a. What value of a would give the region an area of 24 square units?
Answer: a = 9
Step-by-step explanation:
The given figure formed is a rectangle.
Area of given region (Yellow region) = 24 [tex]unit^{2}[/tex]
Length (l) = 6-2 = 4 units
Breadth (b) = a-3 units
Area = l×b
24 = 4 x (a-3)
6 = a-3
a = 9 units