The compounds that are soluble in water can be found in group B: LiOH, MgSO4, and NH4Cl. These compounds are all ionic compounds that dissociate into ions when dissolved in water, forming aqueous solutions.
Solubility in water depends on the nature of the compounds and the interactions between their constituent ions or molecules. Ionic compounds tend to be soluble in water if they form strong ion-dipole interactions with water molecules. In group A, Na2S is soluble in water as it dissociates into Na+ and S2- ions. However, AgCl is insoluble in water, forming a precipitate due to the low solubility of silver chloride. K2CO3 is soluble in water, dissociating into K+ and CO3^2- ions. In group B, LiOH, MgSO4, and NH4Cl are all soluble in water. LiOH dissociates into Li+ and OH- ions, MgSO4 dissociates into Mg^2+ and SO4^2- ions, and NH4Cl dissociates into NH4+ and Cl- ions. In group C, Ba(NO3)2 is soluble in water, forming Ba^2+ and NO3- ions. CaCO3 is insoluble in water and forms a precipitate. PbCl2 is also insoluble in water, forming a precipitate due to the low solubility of lead chloride. In group D, KOH is soluble in water, dissociating into K+ and OH- ions. Ba3(PO4)2 and MgCl2 are both insoluble in water and form precipitates. In group E, H2SO4 is soluble in water, dissociating into H+ and SO4^2- ions. Ca(OH)2 is also soluble in water, forming Ca^2+ and OH- ions. CaSO4 is slightly soluble in water, forming a sparingly soluble precipitate. Therefore, the compounds that are soluble in water are LiOH, MgSO4, and NH4Cl, which belong to group B.
Learn more about ion-dipole interactions here: brainly.com/question/30642064
#SPJ11
if the nucleus of atom y is 18 times heavier than that of hydrogen and element y has an atomic number of 8, then the number of protons is
The number of protons in element Y is 8, as its atomic number is 8, which determines the number of protons in an atom.
The atomic number of an element represents the number of protons in its nucleus. Therefore, element Y has 8 protons. The fact that the nucleus of atom Y is 18 times heavier than that of hydrogen is not directly relevant to determining the number of protons. The mass of an atom is primarily determined by the number of protons and neutrons in its nucleus.
However, the information provided can be used to determine the mass number of atom Y, which is the sum of its protons and neutrons. Assuming that atom Y is neutral, it must have 8 electrons to balance the charge of its 8 protons. Therefore, the complete atomic symbol of element Y is 8Y, indicating that it has 8 protons and an atomic mass of approximately 18 (since it has 10 neutrons).
Learn more about protons here:
https://brainly.com/question/12535409
#SPJ11
0. which of the following statements most correctly describe(s) any chemical equilibrium? question 20 options: (a) all reactions cease (b) the rates of the forward and reverse reactions become equal. (c) the reaction quotient is equal to the equilibrium constant. (d) the reactants have been consumed. (e) both b and c g'
The most correct statement that describes chemical equilibrium is option (e) which states that the rates of the forward and reverse reactions become equal, and the reaction quotient is equal to the equilibrium constant.
At equilibrium, the concentration of reactants and products remains constant, and the reaction is said to be in a state of dynamic equilibrium. The forward and reverse reactions continue to occur, but at equal rates, which maintains the concentration of reactants and products.
The reaction quotient is a measure of the relative concentrations of reactants and products at any given time during the reaction. When the reaction quotient is equal to the equilibrium constant, the system is at equilibrium. Thus, option (c) is also a correct statement. Option (a) is incorrect because reactions do not cease at equilibrium, they are just occurring at equal rates. Option (d) is incorrect because some reactants may still be present at equilibrium.
To know more about chemical equilibrium visit:
https://brainly.com/question/4289021
#SPJ11
Unit 6-Conservation of Matter Avogadro Goes to Court
You are being asked to determine the cost of 1 atom of aluminum. The cost of a roll of
aluminum foil is $2.79, and the roll contains 25 sq. ft. of aluminum foil. You will be provided a
square of aluminum foil that is 12" x 12". All other information that you will need to
determine the cost of one atom of aluminum can be determined by you through either
calculations or experimentation.
Show work please
Answer: it would be d
Explanation:because it works out the most
Which one of the following species has the electron configuration of 1s22s22p6? 1. Na+ 2. O2- 3. F- A) 1 and 2 only B) 1 and 3 only C) 2 and 3 only D) All of 1, 2, and 3 E) Neither 1, 2, or 3
The electron configuration of 1s22s22p6 indicates that the element has a full valence shell consisting of 8 electrons. Therefore, the species with this electron configuration would be a noble gas.
Looking at the options given, we can see that Na+ has lost one electron from its valence shell and would have the electron configuration of 1s22s22p6, making it a possible answer. O2- has gained two electrons and would have the electron configuration of 1s22s22p6, making it a possible answer. F- has gained one electron and would have the electron configuration of 1s22s22p6 3s23p6, making it an incorrect answer. Therefore, the correct answer is A) 1 and 2 only.
The electron configuration 1s22s22p6 represents a stable, full outer electron shell. The correct answer is B) 1 and 3 only. For Na+ (sodium ion), the configuration is 1s22s22p6 as it has lost one electron from its original configuration, resulting in a full outer shell. For O2- (oxide ion), the configuration is different, as it gains two electrons to achieve a stable state: 1s22s22p63s23p6. Finally, for F- (fluoride ion), the electron configuration is indeed 1s22s22p6, as it gains one electron to complete its outer shell. Therefore, only Na+ and F- have the desired electron configuration.
To know about electrons visit:
https://brainly.com/question/1255220
#SPJ11
Given the equation:
A 3.00-g sample of KClO3 is decomposed and the oxygen at 24.0°C and 0.717 atm is collected. What volume of oxygen gas will be collected assuming 100% yield?
A)
mL
B)
mL
C)
mL
D)
mL
E)
none of these
The answer is (A) 1100 mL. The balanced chemical equation for the decomposition of KClO3 is:
2KClO3(s) → 2KCl(s) + 3O2(g)
According to the stoichiometry of the reaction, 2 moles of KClO3 produce 3 moles of O2.
First, we need to calculate the number of moles of O2 produced by the decomposition of 3.00 g of KClO3.
The molar mass of KClO3 is:
39.10 g/mol (K) + 35.45 g/mol (Cl) + 3 x 16.00 g/mol (O) = 122.55 g/mol
Therefore, 3.00 g of KClO3 is equal to:
3.00 g / 122.55 g/mol = 0.0245 mol KClO3
According to the stoichiometry of the reaction, 0.0245 mol KClO3 produces:
0.0245 mol KClO3 x (3 mol O2 / 2 mol KClO3) = 0.0368 mol O2
The ideal gas law can be used to calculate the volume of O2 produced:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.0821 L·atm/(mol·K)), and T is the temperature in Kelvin.
Converting the temperature of 24.0°C to Kelvin:
T = 24.0°C + 273.15 = 297.15 K
Substituting the values into the ideal gas law equation:
V = (nRT) / P = (0.0368 mol) x (0.0821 L·atm/(mol·K)) x (297.15 K) / 0.717 atm
V = 1.10 L or 1100 mL
Therefore, the answer is (A) 1100 mL
Learn more about chemical equation here:
https://brainly.com/question/28792948
#SPJ11
what are the formula masses of water, h2o; propene, c3h6; and 2-propanol, c3h8o?
The formula masses of water, propene, and 2-propanol are 18.015 g/mol, 42.081 g/mol, and 60.096 g/mol, respectively.
The formula mass, also known as the molecular weight, is the sum of the atomic masses of all the atoms in a molecule. For water, H2O, the formula mass would be 2(1.008) + 1(15.999) = 18.015 g/mol. For propene, C3H6, the formula mass would be 3(12.011) + 6(1.008) = 42.081 g/mol. Finally, for 2-propanol, C3H8O, the formula mass would be 3(12.011) + 8(1.008) + 1(15.999) = 60.096 g/mol. In conclusion, It is important to know the formula mass as it can be used to determine the amount of substance in a given sample using Avogadro's number and the mass of the sample.
To know more about formula masses visit:
brainly.com/question/28647347?referrer=searchResults
#SPJ11
radon is dangerous because . question 17 options: it is a gas it is used to treat lung cancer it produces gamma rays if it decays in the lungs, it produces an alpha particle and an atom of a radioactive solid
If it decays in the lungs, it produces an alpha particle and an atom of a radioactive solid.
Radon is a colorless, odorless, and tasteless radioactive gas that is formed naturally from the decay of uranium and thorium. When radon is inhaled, it can decay in the lungs and release alpha particles, which are highly ionizing and can damage lung tissue. This damage can increase the risk of developing lung cancer, particularly in individuals who are exposed to high levels of radon over a long period of time. Therefore, radon is considered dangerous and is classified as a carcinogen by the World Health Organization (WHO) and the Environmental Protection Agency.
To know more about Protection visit :
https://brainly.com/question/23421785
#SPJ11
draw a diagram to show what happens when the bonds in the atoms in the reactants break
Answer: What Happens When the Bonds in the Atoms in the Reactants Break?
Explanation: In a chemical reaction, bonds between atoms in the reactants are broken and the atoms rearrange and form new bonds to make the products.
A Visual Example Would Look Something Like This:
asking a question is inportant in the scientific method. why?
Answer:
some of the questions are to be asked and answered scientifically because:
1.scientific method is less biased
Answer:
The first step of the scientific method is the "Question." This step may also be referred to as the "Problem." Your question should be worded so that it can be answered through experimentation. Keep your question concise and clear so that everyone knows what you are trying to solve.
Hope this helps :)
Pls brainliest...
venus's atmosphere has much more carbon dioxide than earth's because . venus's atmosphere has much more carbon dioxide than earth's because . venus was born in a region of the solar system where carbon dioxide could condense venus was born in a region of the solar system that had more carbon dioxide venus lacks oceans volcanoes on venus must have outgassed much more carbon dioxide than those on earth
Due to a number of variables, Venus's atmosphere contains substantially more carbon dioxide than Earth does.
First, Venus experienced a runaway greenhouse effect, in which higher [tex]CO_2[/tex] concentrations caused higher temperatures, which in turn released more [tex]CO_2[/tex] from the planet's surface. The greenhouse impact was further exacerbated by this positive feedback loop. Second, unlike Earth, Venus does not have a robust carbon cycle that controls carbon dioxide levels through mechanisms like photosynthesis and the breakdown of [tex]CO_2[/tex] in seas. Carbon dioxide is a gas that is taken up by plants on Earth and transformed into organic matter. It is also dissolved in the oceans. Additionally, the absence of plate tectonics on Venus prohibits carbon dioxide from being recycled back into the planet's interior.
To know more about carbon cycle, here
brainly.com/question/30633292
#SPJ4
--The complete Question is, Why does Venus's atmosphere have much more carbon dioxide than Earth's atmosphere? --
Order the following elements according to increasing Zeff using periodic trends: Ca, Se, Kr, K.
Rank from smallest to largest. To rank items as equivalent, overlap them.
Answer: K, Ca, Se, Kr
Explanation:
The periodic trend for Zeff is that it increases as you go across a period (row) from the left to the right. In the 4th row of the periodic table, the four elements of concern are in the following order from left to right: K, Ca, Se, Kr.
how many grams of h3po4 are in 265 ml of a 1.50 m solution of h3po4?
There are 38.92 grams of H3PO4 in 265 mL of a 1.50 M solution of H3PO4.
To solve this problem, we need to use the formula:
[tex]molarity = moles of solute / liters of solution[/tex]
We can rearrange the formula to solve for moles of solute:
moles of solute = molarity x liters of solution
We are given the following information:
molarity = 1.50 M
liters of solution = 0.265 L (converted from 265 mL)
We can now calculate moles of H3PO4:
moles of H3PO4 = 1.50 M x 0.265 L = 0.3975 moles
Finally, we can convert moles to grams using the molar mass of H3PO4:
1 mole H3PO4 = 98 g H3PO4
0.3975 moles H3PO4 x 98 g H3PO4/mol = 38.92 g H3PO4
Therefore, there are 38.92 grams of H3PO4 in 265 mL of a 1.50 M solution of H3PO4.
Learn more about H3PO4 here:
https://brainly.com/question/6373152
#SPJ11
what is the concentration (in m) of hydronium ions in a solution at 25.0 °c with ph = 4.282?
The concentration of hydronium ions in a solution at 25.0 °C with pH = 4.282 is 4.88 x 10^-5 M.
The pH of a solution is a measure of its acidity, which is determined by the concentration of hydronium ions (H3O+) in the solution. The pH scale is a logarithmic scale that ranges from 0 to 14, where a pH of 7 is neutral, a pH below 7 is acidic, and a pH above 7 is basic. The pH can be calculated using the expression pH = -log[H3O+]. To find the concentration of hydronium ions, the expression can be rearranged as [H3O+] = 10^-pH. Substituting the given pH value of 4.282 into the expression gives a concentration of hydronium ions of 4.88 x 10^-5 M.
In summary, the concentration of hydronium ions in a solution at 25.0 °C with pH = 4.282 is 4.88 x 10^-5 M, which can be calculated using the pH expression and the given pH value.
To learn more about solution click here: brainly.com/question/1616939
#SPJ11
Which of the following groups of elements account for more than 95% of the human body by weight?
A. Carbon, hydrogen, oxygen, nitrogen
B. Calcium, hydrogen, oxygen, nitrogen
C. Carbon, phosphorus, oxygen, hydrogen
D. Calcium, phosphorus, hydrogen, nitrogen
Carbon, hydrogen, oxygen, and nitrogen account for more than 95% of the human body by weight. The correct option is A
What is elements ?
An element in chemistry is a pure material made up of atoms that all share the same atomic number, or the quantity of protons in the nucleus.
The structure and operation of cells and tissues in the human body depend on the presence of these elements, which are present in a range of organic substances such as carbohydrates, lipids, proteins, and nucleic acids.
Therefore, In contrast to carbon, hydrogen, oxygen, and nitrogen which make up a larger portion of the body's weight, calcium and phosphorus are also crucial components of the human body.
Learn more about elements here : brainly.com/question/18096867
#SPJ1
a solution of the amino acid aspartic acid is at ph 1. what will be the overall charge, the charge on the two functional groups, and the r group?
At pH 1, aspartic acid will have an overall charge of -1. The carboxyl group will have a charge of -1 and the amino group will be protonated with a charge of +1. The R group will remain unchanged.
Aspartic acid is an amino acid with an acidic side chain, which means it can donate protons. At pH 1, the solution is very acidic and the amino group will be protonated, giving it a charge of +1. The carboxyl group, which is already acidic, will also donate a proton at this pH, resulting in a charge of -1.
Since the charge on the carboxyl group is higher than that of the amino group, the overall charge of the molecule will be -1. The R group, which in this case is a carboxyl group, will remain unchanged as it is not affected by the pH of the solution. Therefore, the overall charge on aspartic acid at pH 1 is -1, with the carboxyl group carrying a charge of -1 and the amino group carrying a charge of +1.
Learn more about aspartic acid here:
https://brainly.com/question/9379332
#SPJ11
which of the following will always cause the greatest increase in the solubility of a gas in a liquid? increasing the pressure of the gas above the liquid and raising the liquid temperature decreasing the pressure of the gas above the liquid and raising the liquid temperature decreasing the pressure of the gas above the liquid and lowering the liquid temperature increasing the pressure of the gas above the liquid and lowering the liquid temperature decreasing the pressure of the gas above the liquid with no temperature change of the liquid
Decreasing the temperature of the liquid while increasing the pressure of the gas will not cause as great of an increase in solubility as increasing the pressure alone.
The solubility of a gas in a liquid is directly related to the pressure of the gas above the liquid. Therefore, increasing the pressure of the gas above the liquid will always cause the greatest increase in the solubility of a gas in a liquid. This is known as Henry's Law, which states that the solubility of a gas in a liquid is directly proportional to the pressure of the gas above the liquid. As the pressure of the gas increases, more gas molecules are forced into the liquid, increasing the solubility. Temperature also affects solubility, but it is not as significant as pressure. As the temperature of a liquid increases, the solubility of a gas generally decreases. Therefore, decreasing the temperature of the liquid while increasing the pressure of the gas will not cause as great of an increase in solubility as increasing the pressure alone.
To know more about solubility visit :
https://brainly.com/question/31900586
#SPJ11
What is the maximum number of grams of PH3 that can be formed when 43.00 g of phosphorous react with excess hydrogen to form PH3? Round your answer to two digits after the decimal point.
P4(g) + 6H2(g) --> 4PH3(g)
The maximum number of grams of [tex]PH_3[/tex] that can be formed when 43.00 g of phosphorous react with excess hydrogen to form [tex]PH_3[/tex] in [tex]P_4(g) + 6H_2(g) --- > 4PH_3(g)[/tex] is 179.42 g.
We must use stoichiometry to estimate the molar mass of phosphine ([tex]PH_3[/tex]) in order to compute the maximum amount of grammes of [tex]PH_3[/tex] that can be produced.
Let's begin by figuring out the molar mass of phosphorus ([tex]P[/tex]):
P has a molar mass of 31.00 g/mol.
Next, we can apply the balanced equation's calculated molar ratio of phosphorus ([tex]P_4[/tex]) to phosphine ([tex]PH_3[/tex]):
1 mol P4 interacts to create 4 mol [tex]PH_3[/tex].
Let's now determine how many moles of phosphorus ([tex]P_4[/tex]) there are:
The formula for calculating the number of moles of [tex]P_4[/tex] is:
mass of [tex]P_4[/tex] / molar mass of [tex]P_4[/tex]= 43.00 g / 31.00 g/mol = 1.38 mol (rounded to two decimal places).
We can determine the number of moles of phosphine ([tex]PH_3[/tex]) produced using the molar ratio:
The formula for the number of moles of [tex]PH_3[/tex]:
4 mol [tex]PH_3[/tex]/mol P4 * 1.387 mol [tex]P_4[/tex] = 5.54 mol (rounded to two decimal places)
Finally, we can figure out how much [tex]PH_3[/tex] weighs:
To the nearest two decimal places, the mass of [tex]PH_3[/tex] is calculated as follows:
5.548 moles * (31.00 g/mol + 3 * 1.01 g/mol) = 179.42 g.
Therefore, when 43.00 g of phosphorus combines with too much hydrogen, the most [tex]PH_3[/tex] that may be produced is 179.42 g.
To know more about grams of [tex]PH_3[/tex] using given balance equation
brainly.com/question/30877951
what is the ph of 0.460 m trimethylammonium iodide, (ch3)3nhi? the kb of trimethylamine, (ch3)3n, is 6.3 x 10-5.
The pH of 0.460 M trimethylammonium iodide is 9.46. To find the pH of the solution, we need to first find the concentration of hydroxide ions, OH-. We can do this by using the Kb value of trimethylamine, which is a weak base. We can write the equilibrium expression as follows:
(CH3)3N + H2O ⇌ (CH3)3NH+ + OH-
Kb = [OH-][ (CH3)3N+]/[ (CH3)3N]
We can assume that the concentration of (CH3)3NH+ is equal to the concentration of (CH3)3NHI since it's the salt of the weak base. Therefore, we can write:
Kb = [OH-][ (CH3)3NHI]/[ (CH3)3N]
Rearranging, we get:
[OH-] = Kb[(CH3)3N]/[(CH3)3NHI]
Plugging in the values we get:
[OH-] = (6.3 x 10^-5)(0.460)/(1) = 2.898 x 10^-5 M
To find the pH, we need to take the negative log of the concentration of H+ ions which is equal to 14 - pOH.
pOH = -log[OH-] = -log(2.898 x 10^-5) = 4.54
pH = 14 - pOH = 14 - 4.54 = 9.46
Therefore, the pH of 0.460 M trimethylammonium iodide is 9.46.
To know about pH:
https://brainly.com/question/2288405
#SPJ11
why do you think that 37 c is the optimumn temperature for the optimum temperature for the operation of these restrictions
The optimum temperature of 37°C is ideal for restriction enzymes because it closely resembles the normal body temperature of the organisms they are derived from, ensuring optimal enzyme activity.
Restriction enzymes are proteins that function to cut DNA at specific sequences. Most restriction enzymes are isolated from bacteria, and the typical body temperature for many bacteria and other organisms, including humans, is around 37°C. Since enzymes have evolved to function best within the natural environment of their source organisms, 37°C is the temperature at which they can maintain their optimal structure and function.
At lower temperatures, enzyme activity may decrease, and at higher temperatures, the enzymes may become denatured and lose their function. Therefore, maintaining a 37°C environment ensures the restriction enzymes are working efficiently and effectively for their intended purpose.
Learn more about enzyme here:
https://brainly.com/question/14953274
#SPJ11
If a 17.90-g sample of a gas occupies 10.0 L at STP, what is the molar mass of the gas at 125°C?
A)
5.48 g/mol
B)
40.1 g/mol
C)
18.4 g/mol
D)
58.5 g/mol
E)
Not enough information is given.
The molar mass of the gas at 125°C is approximately 43.4 g/mol. Therefore, the correct answer is not listed as an option.
We need to use the ideal gas law, PV = nRT, to solve for the number of moles of gas present:
n = (PV) / RT
At STP, P = 1 atm and T = 273 K, so:
n = (1 atm * 10.0 L) / (0.0821 L atm/mol K * 273 K) = 0.412 mol
Now, we can use the formula for molar mass, M = m / n, where m is the mass of the gas:
M = 17.90 g / 0.412 mol = 43.4 g/mol
So the molar mass of the gas at 125°C is approximately 43.4 g/mol
Therefore, the correct answer is not listed as an option.
Learn more about molar mass here:
https://brainly.com/question/31545539
#SPJ11
7. R, the gas constant is equal to these three values, include units;
R, the gas constant is equal to these three values, volume, temperature, pressure and number of moles.
Depending on the other units used in the equation, different units are used for the gas constant. The Gas Constant's Value The units used for pressure, volume, and temperature have an impact on the value of the gas constant "R". These were typical gas constant values prior to 2019. R = 8.3145 J/mol K R = 8.2057 m 3 atm/mol K R = 0.0821 litre atm/mol K. Work per degree every mole is what R means physically. Any system of units for measuring labour or energy, such as joules, or for measuring temperature at an absolute scale, like as kelvin or rankine, may be used to express it.
To know more about gas constant, here:
https://brainly.com/question/14279790
#SPJ1
what is decomposition reaction
example
A decomposition reaction is a type of chemical reaction where a compound breaks down into two or more simpler substances. This process is typically induced by heat, light, or an electrical current.
In a decomposition reaction, the reactant compound typically breaks down into two or more products, which can be elements or simpler compounds.
There are various types of decomposition reactions, such as thermal decomposition, electrolytic decomposition, photolytic decomposition, and catalytic decomposition, depending on the type of energy that is used to initiate the reaction.
For example, the decomposition of hydrogen peroxide (H2O2) into water (H2O) and oxygen (O2) is a decomposition reaction:
[tex]2H_2O_2 --- > 2H_2O + O_2[/tex]
Thus, this is decomposition reaction.
For more details regarding decomposition reaction, visit:
https://brainly.com/question/16987748
#SPJ1
[tex] \huge \red {Answer} [/tex]
A decomposition reaction is a type of chemical reaction where a compound breaks down into two or more simpler substances. This process is typically induced by heat, light, or an electrical current.In a decomposition reaction, the reactant compound typically breaks down into two or more products, which can be elements or simpler compounds.State the second law of thermodynamics, in terms of heat transfer, and describe a scenario in which you have observed this law in action.
The second law of thermodynamics states that in any thermodynamic process, the total entropy of a system and its surroundings always increases. This means that energy tends to flow from hotter objects to cooler objects, and that it is impossible for heat to flow from a cooler object to a hotter object without the input of additional energy.
One scenario in which I have observed this law in action is when I was cooking on a stove. When I turned on the burner, the heat from the flame transferred to the pot, causing the molecules in the pot to vibrate faster and increase in temperature. As the pot became hotter, heat also transferred from the pot to the air around it, which also increased in temperature.
However, as the air around the pot was cooler than the pot itself, the transfer of heat from the pot to the air caused the pot to lose heat energy, eventually causing the burner to turn off once the desired temperature was reached. This process demonstrates the second law of thermodynamics, as heat naturally flows from hotter objects (the pot) to cooler objects (the air), and it is impossible for heat to flow from a cooler object to a hotter object without additional energy input.
To know more about thermodynamics state visit:-
https://brainly.com/question/16818736
#SPJ11
Sodium oxide reacts with Water to form sodium hydroxide.
if reaction has 93% Yield when 0.532 mol of
sodium oxide reacts, find mass of sodium hydroxide
produced.
The mass of sodium hydroxide produced is 39.58g.
Percent yield is the percent ratio of actual yield to the theoretical yield. It is calculated to be the experimental yield divided by theoretical yield multiplied by 100%. If the actual and theoretical yield are the same, the percent yield is 100%
In chemistry, yield is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage.
Given,
moles of sodium oxide = 0.532 moles
From the reaction,
Na₂O + H₂O = 2NaOH
1 mole of sodium oxide gives 2 moles of NaOH
so, 0.532 moles will give 1.064 moles of NaOH
Mass of NaOH = 1.064 × 40 = 42.56g
Theoretical yield = 42.56g
Percentage yield = 93%
Actual yield = (93 × 42.56) ÷ 100
= 39.58g
Learn more about percent yield, here:
https://brainly.com/question/17042787
#SPJ1
A gas sample is held at constant pressure. The gas occupies 3.62 L of volume when the temperature is 21.6°C. Determine the temperature at which the volume of the gas is 3.42 L.
A)
312 K
B)
278 K
C)
20.4 K
D)
295 K
E)
552 K
The temperature at which the volume of the gas is 3.42 L, when held at constant pressure, is 278 K (Option B).
To determine the temperature, we can use Charles's Law, which states that the volume of a gas is directly proportional to its temperature when the pressure is held constant.
The formula for Charles's Law is V1/T1 = V2/T2.
In this case, V1 = 3.62 L, T1 = 21.6°C + 273.15 = 294.75 K, and V2 = 3.42 L.
To find the unknown temperature T2, rearrange the formula as T2 = (V2 * T1) / V1.
Substituting the values, T2 = (3.42 * 294.75) / 3.62 = 278 K. Therefore, the temperature at which the volume of the gas is 3.42 L is 278 K.
Learn more about Charles's Law here:
https://brainly.com/question/21184611
#SPJ11
2.00 g naoh is dissolved in 50.0 ml water. the temperature of the water rises by 7.00oc. determine the enthalpy change for the dissolution process. (specific heat capacity of water is 4.18 j/goc)
The enthalpy change for the dissolution process of 2.00 g NaOH in 50.0 ml water is approximately -27.2 kJ/mol.
This can be calculated using the equation:
ΔH = mcΔT / n
Where:
ΔH = enthalpy change (in kJ/mol)
m = mass of NaOH dissolved (in g)
c = specific heat capacity of water (4.18 J/g°C)
ΔT = temperature change of the water (7.00°C)
n = number of moles of NaOH (which can be calculated using the molar mass of NaOH, 40.00 g/mol)
Substituting the values given, we get:
ΔH = (50.0 g)(4.18 J/g°C)(7.00°C) / (2.00 g / 40.00 g/mol)
ΔH = -27,200 J/mol = -27.2 kJ/mol
Therefore, the enthalpy change for the dissolution process of NaOH in water is exothermic, releasing 27.2 kJ of energy per mole of NaOH dissolved. This means that the process is spontaneous and favors the formation of a solution. The negative sign of the enthalpy change indicates that the process releases heat energy into the surroundings, causing the temperature of the water to rise.
To learn more about enthalpy click brainly.com/question/16720480
#SPJ11
26.8g of ammonium chloride is dissoved in water to make 0.25 l solution what is the molarity of the solution
The molarity of the solution is 5.36 M.
To calculate the molarity (M) of a solution, we need to divide the moles of solute by the volume of the solution in liters. First, we need to determine the moles of ammonium chloride (NH₄Cl) in the given mass. The molar mass of NH₄Cl is 53.49 g/mol.
moles of NH₄Cl = mass of NH₄Cl / molar mass of NH₄Cl
= 26.8 g / 53.49 g/mol
= 0.5 mol
Next, we convert the volume of the solution from milliliters to liters:
volume of solution = 0.25 L
Finally, we calculate the molarity:
Molarity (M) = moles of solute / volume of solution
= 0.5 mol / 0.25 L
= 2 mol/L
Therefore, the molarity of the solution is 2 M.
To learn more about molarity, here
https://brainly.com/question/31545539
#SPJ4
Which nucleus completes the following equation?
Cle+?
O A. 39Y
18
O B. Sr
16
O c. 39s
16
O D. Ar
³⁸₁₈Ar nucleus completes the given equation, hence option D is correct.
The equation provided illustrates how an unstable chlorine isotope breaks down into a beta particle and an argon nucleus. To create an Argon nucleus that is more stable, the nucleus emits a beta particle.
Stable isotopes and supposedly unstable or radioactive isotopes are the two categories into which isotopes fall in science. These last ones are stable and don't produce radioactive radiation.
While Xenon and other isotopes are known to be stable, Xenon-124 and Xenon-136 deteriorate over the course of several trillion years.
Learn more about nucleus, here:
https://brainly.com/question/18852772
#SPJ1
calculate the ph of the resulting solution if 24.0 ml of 0.240 m hcl(aq) is added to
The pH of the resulting solution after adding 24.0 mL of 0.240 M HCl(aq) is approximately 2.24, indicating that it is a highly acidic solution.
To calculate the pH of the resulting solution after adding 24.0 mL of 0.240 M HCl(aq), we first need to determine the moles of HCl added. Moles of HCl = volume (L) × concentration (M) = 0.024 L × 0.240 M = 0.00576 moles.
Assuming the solution is diluted to a final volume of 1 L, the concentration of HCl is now 0.00576 moles / 1 L = 0.00576 M. Since HCl is a strong acid that completely dissociates in water, the concentration of H+ ions will also be 0.00576 M.
Next, we can use the pH formula: pH = -log10[H+]. Substituting the concentration of H+ ions, pH = -log10(0.00576) ≈ 2.24.
To know about solution visit:
brainly.com/question/1616939
#SPJ11
Chemistry, can someone explain this to me
For an O-H bond has a length of 9.6 x 10⁻¹¹ nm, the approximate size of a water molecule, H₂O is D) 3 x 10⁻¹⁰ nm.
How to determine size?The approximate size of a water molecule, H₂O, can be estimated by adding the length of two O-H bonds and the diameter of an oxygen atom.
2(O-H bond length) + oxygen atom diameter = 2(9.6 x 10⁻¹¹ nm) + 1.52 x 10⁻¹⁰ nm ≈ 2.88 x 10⁻¹⁰ nm
Therefore, the approximate size of a water molecule, H₂O, is D) 3 x 10⁻¹⁰ nm.
Find out more on bonds here: https://brainly.com/question/29282058
#SPJ1
