N₂ + 3H2 → 2NH3
224 L of nitrogen reacts with
excess hydrogen at 2773 K and
95 atm, using up 93.5 mol N2.
How many moles of ammonia
form?

Answer:

a solution: for example when sugar is dissolved in water it becomes a sugar solution

The speed of light through space is 300 million m/s .

There was a time when everybody thought that there is no limit for the speed at which an object can travel , but Einstein gave the limit which is the speed of light.

The speed of the light in vacuum travels at a speed of 300 million m/s .

Therefore The speed of light through space is 300 million m/s .

To more about Limit of the speed

https://brainly.com/question/8900007

#SPJ1

Answer:

Solution. Carbonic acid is a dibasic acid with two replaceable hydrogen ions; therefore it forms one acid salt or one normal salt. Hydrochloric acid is a monobasic acid with one replaceable hydrogen ion and so forms only one normal salt.

Explanation:

Answer:

5.02 mol

Explanation:

n(Al) : n(Cl)

2 : 3

x : 7.53

3x = 15.06

n(Al) = 5.02mol

Theoretical yield =0.15 g

% yield = 15%

reaction

C6H12O6 → 2C2H5OH + 2CO2

from above reaction, we get to know that,

1 mole of glucose → 2 mole ethanol

for 4 mole of glucose → 8 mole of ethanol

\frac{55.2}{8(46)} = yield of ethanol

yield of ethanol = 0.15g

% yield = (experimental/theoretical )*100

% yield of ethanol = 0.15 x 100 =15%

To know more about percentage yield refer to:-

https://brainly.com/question/12044380

#SPJ10

Before the occurance of Fossil fuel, our energy needs were modest. For heat, we relied on the sun—and burned wood, straw, and dried dung For transportation, the muscle of horses and the power of the wind in our sails took us to every corner of the world.

Fossil fuels are made from decomposing plants and animals.

These fuels are found in the Earth's crust and contain carbon and hydrogen, which can be burned for energy.

Coal, oil, and natural gas are examples of fossil fuels.

Hence, Before the occurance of Fossil fuel, our energy needs were modest. For heat, we relied on the sun—and burned wood, straw, and dried dung For transportation, the muscle of horses and the power of the wind in our sails took us to every corner of the world.

Learn more about Fossil fuel here ;

https://brainly.com/question/2029072

#SPJ1

Answer:

B is the answer.

Explanation:

sry if wrong :D

Answer:

a.  P = 320 mmHg

Explanation:

For this problem, the pressure, volume, and temperature are changing, so we'll need to combine Boyle's Law and Charles' Law:

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

For this equation, the temperatures must be measured in Kelvin.  The rest of units in the equation only need to match between beginning and end conditions.

Recall that to convert from Celsius to Kelvin, add 273, or use the equation [tex]T_C+273=T_K[/tex].

So [tex]T_1=(44.4+273)[K]=317.4[K][/tex]  and [tex]T_2=(68.1+273)[K]=341.1[K][/tex]

Substituting known values, we can solve for the unknown:

[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

[tex]\dfrac{(574.6[mmHg])(208.1[mL])}{(317.4[K])}=\dfrac{P_2(401.5[mL])}{(341.1[K])}[/tex]

[tex]\dfrac{(574.6[mmHg])(208.1[mL]\!\!\!\!\!\!\!\!\!\!{--} )}{317.4[K]\!\!\!\!\!\!{-}}*\dfrac{341.1[K] \!\!\!\!\!\!{-}}{401.5[mL] \!\!\!\!\!\!\!\!\!\!\!{--} }=\dfrac{P_2(401.5[mL] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----})}{341.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{----}}*\dfrac{341.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{----}}{401.5[mL] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----} }[/tex]

[tex]320.056719296[mmHg]=P_2[/tex]

Accounting for significant figures, [tex]P_2=320.1[mmHg][/tex].  

The closest answer provided is 320, so "a".

Answer:

Ethyl magnesium Bromide

There are three kinds of Hydrogen in  2-methyl-2-butene

The correct question is

How many kinds of  hydrogen atoms are present in 2-methyl-2-butene

Atom was discovered by Dalton's Atomic theory , he predicted that each element consist of large number of a very small thing known as atom.

In the structure of 2-methyl-2-butene there are 3 types oh Hydrogen

1. Attached to the Carbon atom connecting the methyl ion to the butene

2. Connected to the last Carbon atom

3. Connected to the Carbon bond having double bond.

Therefore there are three kinds of Hydrogen in  2-methyl-2-butene.

To know more about Atom

https://brainly.com/question/1566330

#SPJ1

Answer:

Chemical reaction A, because the reactant is a compound

Explanation:

In a decomposition reaction, a compound is broken down into its components, so the number of products is greater than the number of reactants

Chemical reaction A, because the reactant is a compound is a statements correctly identifies the decomposition reaction and describes a substance involved.

When atoms establish or break chemical bonds, chemical processes take place. Reactants are the substances that begin a chemical reaction, while products are the compounds that are created as a result of the reaction.

Although a chemical reaction is not always a "one-way street," as we'll examine further in the next section, an arrow is drawn between the reactants and products to denote the direction of the reaction.

 Our equation must have them in it in order for there to be an equal number of atoms of each element on both sides of the equation.

Therefore, Chemical reaction A, because the reactant is a compound is a statements correctly identifies the decomposition reaction and describes a substance involved.

To learn more about chemical reaction, refer to the link:

https://brainly.com/question/29039149

#SPJ2

The energy source from a reservoir would provide affordable, abundant electricity for a factory is a hydroelectric power plant; option D.

Energy is the ability to do work.

Energy generating plants may either use wind, water or solar energy to produce electrical energy.

The most abundant source of energy from a reservoir is hydroelectric power plant.

Therefore, the energy source from a reservoir would provide affordable, abundant electricity for a factory is a hydroelectric power plant.

In conclusion, hydroelectric power plants are reservoirs of abundant energy supply.

Learn more about hydroelectric power plants at: https://brainly.com/question/3406557

#SPJ1

Al₂(SO₄)₃

= 2.Al+3.S+12.O

= 2.27 + 3.32+12.16

= 54+96+192

=342 g/mol

The characteristics of a double replacement reaction as well as example to depict it are clearly explained below.

A double-replacement reaction is one that occurs when parts of two ionic compounds are exchanged thereby making two new compounds.

A characteristic of a double-replacement equation is that there are two compounds as reactants and two different compounds as products.

A precipitate forms in a double-replacement reaction when the cations from one of the reactants combine with the anions from the other reactant to form an insoluble ionic compound.

An example of a double displacement reaction is;

CuCl₂(aq) + 2AgNO₃(aq) → Cu(NO₃)₂(aq) + 2AgCl(s)

Due to the fact that a precipitate is formed, the double replacement reaction is also called a precipitation reaction.

Read more about double replacement reaction at; https://brainly.com/question/23918356

#SPJ1

From the equation, we know that for every 2 moles of phosphorous acid produced, 1 mole of diphosphorus trioxide is consumed.

This means that we need to find the mass of 10.2/2 = 5.1 moles of diphosphorus trioxide.

So, the formula mass of diphosphorus trioxide is:

Thus, 5.1 moles have a mass of:

Answer: 561 g

Explanation:

Answer:

protein molecule

Explanation:

Answer: Protein

Explanation:

Amino acids from protein molecules.

NOTICE: There are attachments attached to this answer that is mentioned  in each paragraph!

We frequently see DNA replication as a well-organized, methodical process, much like a production line. It's not. For the DNA polymerase to read it, the DNA must not lie in a straight line and must be in motion, not static. It is curled and twisted. First, realize that this is a molecular issue. Bacteria lack neurons, cannot "think," and cannot make decisions. Everything is a chemical reaction, and chemical reactions frequently depend on one concentration's osmotic pressure being higher than another, both inside the cell and outside. Even at that level, there is a lot of "nothing," albeit nothing is empty. For a better understanding of the environment, picture a cell as a large room filled with balls of all sizes. Each ball has a unique form and isn't spherical; some balls fit together flawlessly while others don't. This is the easiest way to conceptualize the universe of molecular chemistry. There is never "nothing" other than in space when you push your way through layers upon layers of free oxygen, free nitrogen, helium, carbon dioxide, hydrogen dioxide, argon, methane, etc. when you walk through what we term "air."

Replication mistakes happen. Sometimes DNA polymerase enzymes add the incorrect nucleotide, too many, or too few nucleotides to a sequence. Or the DNA polymerase gets looped on the same strand, adding a few codons in a repetition before the strand slips away and it continues, or there is a tangle of crossing DNA and it jumps to the incorrect thread and back (or never), etc. In order to ensure that the bases added to a developing strand are appropriately matched with their complements, DNA polymerase enzymes are quite picky about the nucleotides they choose to use. However, these enzymes do make errors. Specifically, at a rate of around 1 per 100,000 nucleotides. Doesn't sound like much, but since each diploid cell has 6 billion base pairs, there are around 120,000 errors every cell division.

Ribosomal errors during transcription can even change the synthesis of the DNA polymerase proteins, leading to the creation of a mechanism that is already faulty. Since not all ribosomes are created equally, ribosome quality is important. Bacterial mutation rates are greater because bacterial ribosomes are less accurate and produce a lot more errors than human ribosomes. That is a benefit for simple, quickly reproducing life, which is also very vulnerable to the stresses of the molecular chemical environment. Unlike most more complex forms of life, which also have DNA repair mechanisms incorporated into the DNA polymerase, humans have these mechanisms. Some of these processes can often correct mistakes as soon as they are produced, while others can do so over time.

Regarding the pairing of C and T, etc. There are a number of balls in that room that, at first glance, appear to be identical, but if you compare two closely, you could find that one bump is larger or is located incorrectly even if it appears to be same. Proton shift is one such. Here are two instances using the purine guanine (G) and the pyrimidine thymine (T) (G). Please excuse my handwriting; I learned to type at a very young age. Shifted on the right, normal on the left. NA polymerase (as do most more complex forms of life) frequently correct mistakes as soon as they are made and others that correct mistakes later.

(ATTATCHMENT #1)

Answer:

B.) +6

Explanation:

To find the oxidation number of sulfur, we can assume the oxidation numbers of the other elements.

What I mean is, oxygen (O) always has an oxidation number of (-2). That being said, if there are 4 oxygen atoms, oxygen is contributing -8 overall. We also know that hydrogen generally has an oxidation number of (+1). Like before, if there are 2 hydrogens, it must be contributing +2.

If the overall molecule is neutral, we have to get these charges to balance out.

In essence, -8 + 2 + ? = 0?

If you combine the charges from oxygen and hydrogen, you are left with -6. Therefore, to make the molecule neutral, sulfur must have an oxidation number of +6.

3531.23 J is the energy used to heat tin when 229.2 g of tin was heated from 46.3 to 115.7°C.

The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (kg) of the material when its temperature increases by 1 K (or 1 °C), and its units are J/(kg K) or J/(kg °C).

Q=mcΔT

Give data:

m=229.2 g

c=0.222 J/g x °C

ΔT=115.7°C - 46.3°C

ΔT= 69.4 °C

Putting value in the equation:

Q=mcΔT

Q=229.2 g x 0.222 J/g°C x 69.4 °C

Q= 3531.23 J

Hence, 3531.23 J is the energy used to heat tin.

Learn more about the specific heat capacity here:

https://brainly.com/question/27919379

#SPJ1

When the potato is put into the distilled water, it will absorb the water. The water is trying to dilute the salt inside the potato.

What is the meaning of concentrated?

The concentration of a solution is a measure of the amount of solute that has been dissolved in a given amount of solvent or solution.

When the potato is put into the distilled water, it will absorb the water. The water is trying to dilute the salt inside the potato.

Since potatoes already contain sugar, less water will diffuse out of the potato placed in sugar water. The slice placed in water will be rigid since it will absorb water.

Learn more about the concentration here:

https://brainly.com/question/17242527

#SPJ1

N₂ + 3H₂ → 2NH₃

moles N₂ = 1/3 x 6.25 = 2.083

Answer:

2.083 moles of N₂ would be required to react with 6.25 moles of H₂.

Explanation:

Let us first write the balanced chemical equation :

      N₂ + 3H₂ → 2NH₃

Therefore from this equation it is clear that:

3 moles of H₂ require 1 mole of N₂

∵ 1 mole of H₂ requires [tex]\frac{1}{3}[/tex]  moles of N₂

∵ 6.25 moles of H₂ requires [tex]\frac{(1*6.25)}{3}[/tex][tex]=2.083[/tex] moles of N₂

MOLE CONCEPT :

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter. A mole is defined as the amount of substance containing the same number of discrete entities (such as atoms, molecules, and ions) as the number of atoms in a sample of pure 12C weighing exactly 12 g. One Latin connotation for the word “mole” is “large mass” or “bulk,” which is consistent with its use as the name for this unit. The mole provides a link between an easily measured macroscopic property, bulk mass, and an extremely important fundamental property, number of atoms, molecules, and so forth.

To know more about mole concept refer to:

https://brainly.in/question/1062729

#SPJ12

The plastic region of the stress-strain curve for a metal is characterized by a proportional relationship between stress and strain.

Stress-strain curve serves as the curve that help to show the relationship between stress and strain of a particular material especially in engineering.

With these curve the  reaction of a material when a load is applied can be known before using the material for construction work.

Read more on stress-strain curve here:

https://brainly.com/question/13110518

#SPJ11

Answer:

5.0 mol

Explanation:

From the coefficients of the equation, we know that for every 2 moles of Mn consumed, 2 moles of MnO are produced.

Thus, the number of moles of Mn consumed is equal to the number of moles of MnO produced, and thus the answer is 5.0 mol.

The moles of MnO formed with the reaction of 5 moles of Mn is 3 moles.

In a chemical reaction, the reagent that is present in a lesser quantity and governs the rate of the reaction is termed as the limiting reagent.

In the reaction of the formation of MnO, according to the stoichiometric law 2 moles of Mn reacts with 1 moles of Oxygen.

Thus, the moles of oxygen consumed by 7 moles of Mn is:

2 moles Mn = 1 mole O₂

7 moles Mn = 3.5 moles O₂

The available moles of O₂ = 5 mol.

The remaining moles of O₂ = 5-3.5 moles

The remaining moles of O₂ = 1.5 moles

The reaction of 5 moles Mn requires 2.5 moles of O₂, whereas the available moles of oxygen is 1.5 moles. Thus, oxygen serves as the limiting reagent.

The moles of MnO formed with the reaction of 5 moles Mn and 1.5 moles O₂

1 mole O₂ = 2 moles MnO

1.5 moles O₂ = 2 * 1.5 moles MnO

1.5 moles O₂ = 3 moles MnO

Thus, the moles of MnO formed with the reaction of 5 moles of Mn with the available oxygen is 3 moles.

Learn more about stoichiometric law, here:

https://brainly.com/question/14465605

#SPJ1

One of the postulates in John Dalton's atomic theory was later subjected to change was that Various scientists found that atoms consist of subatomic particles with varying mass and charge. option C is correct.

An atom is consist of three sub atomic particles called proton, neutrons and electrons also known as the fundamental nit of an atom.

Atom consist of an nucleus into which proton and neutrons are present and protons are positively charged whereas neutrons are neutral and electrons revolve around the nucleus in the fixed paths called shells and negatively charged.

Therefore, the postulates in John Dalton's atomic theory was later subjected to change was that Various scientists found that atoms consist of subatomic particles with varying mass and charge. option C is correct.

Learn more about subatomic particles, here:

https://brainly.com/question/7221719

#SPJ1

Answer:

D. some scientists found that bonds between atoms are broken rearranged or reformed during reactions. According to Dalton's other theories, this is the only one that differentiates from his original theories :)

Explanation:

Answer:

Just Barely Base/Neutral

Explanation:

a pH of 8.0 is greater than Neutral (7.0) but is still neutral due to it being more neutral than a base

[tex](40.0)(7.426)=\boxed{297.0 \text{ g (to 4 sf)}}[/tex]

Answer:

The Coefficient is 1

Explanation:

The number of calories which are absorbed when water absorbs 6.55 KJ of energy is 1565.49 calories

To know the number of calories which are absorbed when water absorbs 6.55 KJ of energy, we shall begin by converting 6.55 KJ to joules (J). Details below:

1 KJ = 1000 J

Therefore,

6.55 KJ = (6.55 KJ × 1000 J) / 1 KJ

6.55 KJ = 6550 J

Finally, we shall convert 6550 J to calories. This is illustrated below:

4.184 J = 1 calorie

Therefore,

6550 J = (6550 J × 1 calorie) / 4.184 J

6550 J = 1565.49 calories

Thus, from the above calculations, we can conclude that the number of calories absorbed is 1565.49 calories

Learn more about conversion:

https://brainly.com/question/28645760

#SPJ1

1.2 L of hydrogen can be produced at a pressure of 2 atm and a temperature of 298 K.

The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).

Step 1: Write the balanced equation

Mg + 2 HCl ⇒ MgCl₂ + H₂

Step 2: Calculate the moles corresponding to 2.3 g of Mg

The molar mass of Mg is 24.31 g/mol.

2.3 g × 1 mol ÷24.31 g = 0.095 mol

Step 3: Calculate the moles of H₂ produced

0.095 mol Mg × 1 mol H₂ ÷ 1 mol Mg = 0.095 mol H₂

Step 4: Calculate the volume occupied by the hydrogen

We will use the ideal gas equation.

P × V = n × R × T

V = n × R × T÷P

V = 0.095 mol × (0.0821 atm.L/mol.K) × 298 K÷2 atm

V =  1.2 L

Learn more about the ideal gas here:

https://brainly.com/question/27691721

#SPJ1

Answer:

CU

Explanation:

Cu is the correct answer if I'm correct