Na2SO3" represents sodium sulfite. What does the 4 mean in the formula 4Na2SO3? There are four atoms of sodium. There are four atoms of sodium sulfite. There are four molecules of sodium sulfite. There are four elements in sodium sulfite. 7
The World on Turtle's Back" is a creation myth because it focuses on characters whom the Iroquois considered "gods. " is an Iroquoian story about people and animals who talk to each other. Explains how the Iroquois believe that the earth was created. Describes Iroquoian social and cultural values.

Answers

Answer 1

The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.

A molecule is formed when two or more atoms of the same or different elements come together. The formula of the molecule must reflect the number of atoms from which it is formed. The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.

The "The World on Turtle's Back" is a legend creation story. According to this story, the world was created on a giant turtle back. The folktale is common among the  Iroquois Native Americans.

Learn more: https://brainly.com/question/19922822


Related Questions

A diprotic acid (H2X) titrated with a solution of NaOH for 25 ml of the acid 87.42 ml of a 1.95 M solution of NaOH was required to reach the equivalent point, the concentration of the diprotic acid equals

0.14
6.8
3.4
0.29

Answers

The concentration of the diprotic acid equals 3.4 M

We'll begin by writing the balanced equation for the reaction.

H₂X + 2NaOH —> Na₂X + 2H₂O

From the balanced equation above,

The mole ratio of the acid, H₂X (nA) = 1The mole ratio of the base, NaOH (nB) = 2

From the question given above, the following data were obtained:

Volume of acid, H₂X  (Va) = 25 mLVolume of base, NaOH (Vb) = 87.42 mLMolarity of base, Ca(OH)₂ (Mb) = 1.95 MMolarity of acid, H₂X (Ma) =?

MaVa / MbVb = nA/nB

(Ma × 25) / (1.95 × 87.42) = 1/2

(Ma × 25) / 170.469 = 1/2

Cross multiply

Ma × 25 × 2 = 170.469

Ma × 50 = 170.469

Divide both side by 50

Ma = 170.469 / 50

Ma = 3.4 M

Therefore, the concentration of the acid, H₂X is 3.4 M

Learn more about titration:

https://brainly.com/question/25624144

Which statement correctly defines dynamic equilibrium?
At dynamic equilibrium, the rates of forward and reverse reactions are equal.
At dynamic equilibrium, the rate of the forward reaction is higher than the rate of the reverse reaction.
At dynamic equilibrium, the forward and reverse reactions stop.
At dynamic equilibrium, the concentrations of reactants and products are equal.

Answers

Answer: at dynamic equilibrium, the rates of forward and reverse reactions are equal.

Explanation:

The correct statement defines dynamic equilibrium "at dynamic equilibrium, the rates of forward and reverse reactions are equal."

What is dynamic equilibrium?

The state of a particular system wherein the reversible reaction takes place ceases modifying the ratio of reactants as well as products, but there is still a transfer of substances among the reactants and products is known as dynamic equilibrium.

What is reactions?

Chemical reaction can be defined as the a method for creating novel chemicals with unique features.

The correct statement defines dynamic equilibrium "at dynamic equilibrium, the rates of forward and reverse reactions are equal."

Therefore, the correct answer will be option (a).

To know more about reaction and dynamic equilibrium

https://brainly.com/question/2363073

#SPJ2

When Brian first sorted out his thoughts, he figured this was the first day after the crash and what did he think would happen next?​

Answers

It should be noted that when Brian first sorted out his thoughts, the first thing that he thought would happen next is that he would probably be rescued that day.

It should be noted that in Chapter 5 of Hatchet, Brian wakes up in the forest and then, he realized that he was desperately thirsty.

When Brian first sorted out his thoughts, he figured this was the first day after the crash and that he would probably be rescued that day. He believed that he was going to wither up and die if he doesn't get anything that he'll drink.

Learn more about excerpts on:

https://brainly.com/question/21400963

which properties are affected by temperature?

Answers

Answer:

Please give Brainliest!

Explanation:

Material properties are dependent on the temperature. The tensile strength, yield strength and modules of elasticity decrease with increasing temperature. It should be expected that fatigue properties are also affected by the temperature.

what are three different facts about mass
plz tel will give brainlyest

Answers

Answer: all mass takes up space. everything has mass. Theres a unit of mass called a slug thats not the bug!

Explanation:

mass- the quantity of matter in a physical body

1) mass is a measure of the body’s inertia

2) mass is measured in kilograms (kg)

3) mass of an object also determines the objects strength of its gravitational attraction to other bodies

Which of the following is the correct chemical symbol for Aluminium?
A: AL
B: Al
C: aL
D: al

Answers

The answer is Al which is option B
B because The A is Dominant and the l is recessive

2) Nitrogen gas will react with hydrogen gas to produce ammonia, NH3, How many
moles of hydrogen gas are required to produce 0,86 moles of NH3?

Answers

Answer:

12 grams of hydrogen gas

and 56 grams of nitrogen gas

The molar mass of ammonia is 17 g/mol.

68 grams of ammonia corresponds to  

17g/mol

68g

=4moles

4 moles of ammonia will be obtained from  

2

4×1

=2  moles of nitrogen and  

2

4×3

=6  moles of hydrogen.

The molar masses of nitrogen and hydrogen are 28 g/mol and 2 g/mol respectively.

2 moles of nitrogen corresponds to 2×28=56  grams.

6 moles of hydrogen corresponds to 6×2=12  grams.

when an atom in an excited state returns to its ground state it

Answers

Answer:

Inside the Atom

Just like bricks are the building blocks of a home, atoms are the building blocks of matter. Matter is anything that has mass and takes up space (volume). All matter is made up of atoms. The atom has a nucleus, which contains particles of positive charge (protons) and particles of neutral charge (neutrons). Surrounding the nucleus of an atom are shells of electrons - small negatively charged particles. These shells are actually different energy levels and within the energy levels, the electrons orbit the nucleus of the atom.

One of the main properties used to describe a population

Answers

Answer:

Birth rate, death rate, emigration, immigration, or a census.

Explanation:

how do i set up an electron configuration

Answers

Answer:

Electron configuration can be carried out in two steps which can be:

Sublevel notation

Shell notations.

In the sublevel notation, the sequence of filling electrons into the orbitals of the sublevels are guided by some principles:

the maximum number of electrons in the orbital of sublevels are two for s-sublevel, six for p-sublevel, ten for d-sublevel and fourteen for f-sublevel. This indicates that the maximum number of electrons in an orbital is two.

Aufbau's prinicple states that sublevel with lower energies are filled up before those with higher energies.

Pauli exclusion principle states that no two electrons in an atom can have the same set of the four quantum numbers.

Hund's rule states that electrons go into degenerate orbitals singly first before pairing occurs.

Using the shell notation, numbers are used to denote the sum of electrons in all orbitals each energy level.

For an atom of Be:

Sublevel notation for the 4 electrons 1s²2s²

Shell notation 2,2

Other representation is using the electron dot structure.

NEED HELP ASAP PLZZZ

Answers

Answer:

Im pretty sure the answer is A. An electron moves from the FIFTH energy level down to the SECOND energy level.

Explanation:

Which of the following is the strongest covalent bond?

Single bond
Double bond
Triple bond
Hydrogen bond

Answers

Answer:

Triple bond is the strongest bond

Triple bonds are stronger than the equivalent single bonds or double bonds, with a bond order of three.

Answer:

single bond.

In a single covalent bond, when the electrons are shared between two s orbitals, the resulting bond is a sigma (σ) bond . Sigma bonds are the strongest covalent chemical bonds....!!

At room temperature Bromine is a liquid and lodine is a solid, what can be inferred
about the intermolecular forces of these two elements?

Answers

Answer:

Explanation:

The intermolecular forces are stronger in Iodine, meaning that its molecules are stronger and can hold that solid structure at room temperature, where Bromine cannot due to its IMF's being weaker.

How many total atoms does 3Na2S2O3 have

Answers

Answer:

21

Explanation:

Let us count the number of individual atoms for Na2S2O3 (the compound name):

Na: 2

S: 2

O: 3

This brings us to a total of 7 atoms for one molecule of sodium thiosulfate. For three of these compounds, we get 3*7=21

please help me on this question plizzźzz

what is the green colouring matter found in plants called​

Answers

Answer:

the answer is chlorophyll....

Explanation:

if u need it's purpose just let me know

Explanation:

the green colouring matter found in plants is called chlorophyll.

Why is eating animals to obtain energy considered exothermic

Answers

Its considered exothermic because it helps then stay cool or and hot

Zn-71 has a half life of 2.4 minutes. If one had 100g at the beginning, how many grams would be left after 12 minutes?

Answers

3.125g

Explanation

2.4 minutes = 1 half life

so 12 minutes = 5 half lives (12/2.4)

100g/2 = 50g (1 half life)

50g/2 = 25g (2 half lives)

25g/2 = 12.5g (3 half lives)

12.5g/2 = 6.25g (4 half lives)

6.25g/2 = 3.125g (5 half lives)

Which statement describes why sodium reacts more vigorously than magnesium to hydrochloric acid? Refer to the periodic table. Circle the letter of the correct answer.

1) Sodium has a smaller atomic radius than magnesium.
2)Sodium has a lower ionization energy than magnesium.
3)Magnesium has a lower ionization energy than sodium.

Answers

Answer:

Its B all the others arent true and also dont make any sense

Explanation:

Sodium has a lower ionization energy than magnesium describes why sodium reacts vigorously than magnesium chloride.

Why is sodium more reactive than magnesium?Sodium is more reactive than magnesium because it has the ability to easily lose electron, hence have lower ionization energy.Sodium belong to group one on the periodic table and they are called akali metal while magnesium belong to group two on the periodic table and they are called alkali Earth metal.

Sodium and magnesium belong to the in the 3rd period. Iin the outermost energy level sodium has one electron but magnesium has 2 electrons. Therefore, there is more attraction abetween the nucleus and electrons in magnesium than that of sodium.

Therefore, sodium is more reactive than magnesium chloride because of lower ionization energy.

For more details on sodium reactivity, check the link below.

https://brainly.com/question/6837593

True/False: For the same system, heterogeneous nucleation will occur at less undercooling than homogeneous nucleation.

Answers

Answer:

True.Explanation:

same system, heterogeneous nucleation will occur at less undercooling than homogeneous nucleation.

What would happen if you broke a magnet in half?

Answers

Answer:

Option D

Explanation:

Since the whole magnet is magnetized, when you break a magnet in two parts, you will receive 2 mini magnets which will work just like a magnet.

Hoped this helped.

[tex]BrainiacUser1357[/tex]

Answer:

4

The two pieces would each have a north and south end

A compound has a molar mass of 163.59 g/mol. If you have 736.155 grams of this compound, how many moles do you have?

Answers

Answer:

4.50000 moles

Explanation:

This is dimensional analysis. If there is 163.59 grams in 1 mole of this compound then the converse is true: in 1 mole of this compound there is 163.59 grams --> 1 mol/163.59 grams.

Now that you have your conversion factor:

736.155 grams * (1 mol/163.59 grams) is your equation.

When you multiply these together, grams cancel and you end up with the desired mole-based answer:

4.50000 moles (The extra zeros are to make up for the 6 significant figures in 736.155, feel free to omit them if necessary.)

(pls give brainliest if this helped)

How does VSEPR theory describe the double bonds between the central carbon atom and each oxygen atom of Co2?

Answers

The double bonds in CO2 are counted as single regions of electron density.

The valence shell electron pair repulsion theory VSEPR  is a description of the shape of molecules based on the number of electron pairs that surround the central atom in the molecule. Double bonds are counted as a single region of electron density.

Hence, the two double bonds in CO2 are counted as two regions of electron density around the central carbon atom. Hence, the molecule is liner at a bond angle of 180 degrees.

Learn more about VSEPR theory: https://brainly.com/question/14225705

If substances B and C are both in the gas phase and are at the same energy level, which of the two substances will need to have more energy transferred out in order to change to the liquid phase? Substance B or Substance C? Explain your answer below.
For Science

Answers

Answer:

Substances can change phase—often because of a temperature change. At low temperatures, most substances are solid; as the temperature increases, they become liquid; at higher temperatures still, they become gaseous.

The process of a solid becoming a liquid is called melting. (an older term that you may see sometimes is fusion). The opposite process, a liquid becoming a solid, is called solidification. For any pure substance, the temperature at which melting occurs—known as the melting point—is a characteristic of that substance. It requires energy for a solid to melt into a liquid. Every pure substance has a certain amount of energy it needs to change from a solid to a liquid. This amount is called the enthalpy of fusion (or heat of fusion) of the substance, represented as ΔHfus. Some ΔHfus values are listed in Table 10.2 “Enthalpies of Fusion for Various Substances”; it is assumed that these values are for the melting point of the substance. Note that the unit of ΔHfus is kilojoules per mole, so we need to know the quantity of material to know how much energy is involved. The ΔHfus is always tabulated as a positive number. However, it can be used for both the melting and the solidification processes as long as you keep in mind that melting is always endothermic (so ΔH will be positive), while solidification is always exothermic (so ΔH will be negative).

The chemical equation below shows the burning of magnesium (Mg) with oxygen (O2) to form magnesium oxide (MgO). 2Mg O2 Right arrow. 2MgO The molar mass of O2 is 32. 0 g/mol. What mass, in grams, of O2 is required to react completely with 4. 00 mol of Mg? 2. 00 64. 0 128 256.

Answers

Answer:

is the hoodie oh ok with that being a good day to be a good time with my friends and I have exam next to me that I am a very happy to be the best of the day

and

he is the best way possible for me

The mass of oxygen required for complete utilization of 4 mol of Mg has been 64 g. Thus, option B is correct.

The balanced equation for the reaction has been:

[tex]\rm 2\;Mg\;+\;O_2\;\rightarrow\;2\;MgO[/tex]

From the balanced chemical equation, for complete utilization of 2 moles of Mg, 1 moles of oxygen has been used.

The given moles of Mg has been 4 mol. The moles of oxygen required can be given as:

[tex]\rm 2\;mol\;Mg=1\;mol\;O_2\\4\;mol\;Mg=2\;mol\;O_2[/tex]

Thus, the moles of oxygen required has been 2 mol for complete utilization of 4 mol Mg.

The mass from moles can be calculated as:

[tex]\rm Mass=Moles\;\times\;molecular\;mass[/tex]

The molecular mass of oxygen has been 32 g/mol.

The mass of oxygen has been:

[tex]\rm Mass=2\;\times\;32\;g\\Mass=64\;g[/tex]

The mass of oxygen required for complete utilization of 4 mol of Mg has been 64 g. Thus, option B is correct.

For more information about the chemical equation,refer to the link:

https://brainly.com/question/20492533

Why does liquid move like it does when heated on the right side?

Answers

Answer:Liquids expand for the same reason, but because the bonds between separate molecules are usually less tight they expand more than solids.

Explanation:Heat causes the molecules to move faster, (heat energy is converted to kinetic energy ) which means that the volume of a gas increases more than the volume of a solid or liquid.

What are electron Subshells?

Answers

Answer:

a subshell is a subdivision of electron shells that are separated by electron orbitals.

Explanation:

(subshells are labeled s,p,d, and f in an electron configuration)

Which of the following is a correctly balanced equation? A. NaClO3 → NaCl 3O2 B. 2HgO → 2Hg O2 C. 2ZnS O2 → 2ZnO 2SO2 D. 4CO Fe3O4 → 4CO2 Fe E. 2Fe 2Cl2 → 2FeCl3.

Answers

Answer:

yes is the anser

Explanation:

i donyt know how to be wrong

The correctly balanced equation among the options is 2HgO → 2Hg + O2.

BALANCING CHEMICAL EQUATION:

Balancing a chemical equation means ensuring that the number of atoms of each element on both sides of the equation are the same in accordance to the law of conservation of mass.

To balance a chemical equation, we make use of coefficients, which are numbers placed in front of the element or compound in the reaction.

According to this question, the following equation: 2HgO → 2Hg + O2, is correctly balanced because the number of atoms of Hg (2) and O (2) are the same on both sides.

Learn more about balancing chemical equations at: https://brainly.com/question/8062886

How do I convert the ones circled in red? Please explain how you did it don’t just do it for me.

Answers

Answer:

25 centigrams is equal to 2.5 grams.

150 hectometers are 10,000 centimeters.

Explanation:

10 centigrams is equal to 0.1 gram.

25 / 10 = 2.5

1 hectometer is equal to 10,000 centimeters.

150 x 10,0000 = 1500000

when an acid and alkali react to form water and salt

Answers

Answer:

Neutralisation involves an acid reacting with a base or an alkali, forming a salt and water.

what is the relationship between plants soil and nutrients?

Answers

Answer:

Soil helps anchor plants and provides them essential elements of water and nutrients. Plants prevent soil erosion and provide organic matter.

Explanation:

Other Questions
Is the following change an oxidation or reduction?manganese (IV) oxide to manganese (III) oxide. Dehner Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Total direct labor-hours 85,000Total fixed manufacturing overhead cost $306,000Variable manufacturing overhead per direct labor-hour $ .00Recently, Job P951 was completed with the following characteristics: Number of units in the job $5Total direct labor-hours $100Direct materials $700Direct labor cost $8,500 The total job cost for Job P951 is closest to:_____. a. $9.200.b. $1,660.c. $9,460.d. $10,160. A rental car company offers two rental plans, Plan A and Plan B, for the same economy size car. For both plans, the total rental cost is a function of the number of miles that the car is driven. In addition to a flat fee of $75, Plan A offers a rate of $0.20 per mile for an unlimited number of miles. Plan B offers a higher mileage rate of $0.35 per mile but does not charge a flat fee for the rental.Create a system of linear functions modeling the cost of the car rental plans, A and B, as a function of the miles driven.For how many miles will the rental fee be the same under both plans A and B? 7+35/3+5 - 7-35/3-5 if you were to choose between dating a Muslim girl that is loyal and an American girl who cheats every two days with different men who would you choose and why? I / move / new school / English / taught / native teachers. A)I moved to a new school which English is taught with native teachers. B)I moved to a new school which English is taught by native teachers. C)I moved to a new school where English is taught with native teachers. D)I moved to a new school where English is taught by native teachers If you were exploring the topic of science education, what category of classical invention would it fall in A car's bumper is designed to withstand a 6.12 km/h (1.7-m/s) collision with an immovable object without damage to the body of the car. The bumper cushions the shock by absorbing the force over a distance. Calculate the magnitude of the average force on a bumper that collapses 0.210 m while bringing a 810 kg car to rest from an initial speed of 1.7 m/s. Which of the following describes elaboration?restates the ideaadds information that further explains or defines the main ideasums up, or repeats, the main ideastates the main idea of the paragraph the masses of your hand and your notebook are quite small, so the force of attraction between them is HELP PLS IM FAILING PYTHAGOREAN THEOREM the quotient of (x^4 - 3x^2 + 4x - 3) and a polynomial is (x^2 + x - 3) what is the polynormial can you guys please introduce yourself Find the value of a. Round the nearest tenth. I Will Mark Brainliest The figure shows a rectangue with its length and breadth as indicated,Give that the perimeter of a rectangle is 120cm, find the area of rectangle . What is the solubility of salt at 60C if 2 gm of the salt is left behind when 7 gm of its saturated solution at that temperature dried?a) 20b) 40c) 60d) 80 How do you Find the acute Angle A when sinA=0.616? Someone answer THIS FOR BRAINLIST What conclusion most directly occurs as a result of the importance of rule of law in the American governmental system?A. The rule of law prevents any government leader from becoming a monarch.B. The rule of law ensures that the Constitution can be amended as the needs of society change.C. The rule of law prevents one branch of government from becoming more powerful than the others.D. The rule of law ensures that US citizens retain their right to self-government. Flagstaff Company has budgeted production units of 8,000 for July and 8,200 for August. The direct materials requirement per unit is 3 ounces (oz.). The company has determined that it wants to have safety stock of direct materials on hand at the end of each month to complete 25% of the units budgeted in the following month. There was 6,000 ounces of direct material in inventory at the start of July. The total cost of direct materials purchases for the July direct materials budget, assuming the materials cost $1.20 per ounce, is:____________A) $28,800.B) $28,980.C) $21,600.D) $28,620.E) $36,180. if g(x) = (x) -5 ; find g(-5),g(0) and g(5).