Name the following compounds:

The expected answer would be A) H2 and D) O2. The van der Waals correction for intermolecular attractions is related to the size of the molecules and their polarity. The larger the molecule, the stronger the van der Waals forces between them, and therefore the higher the correction.

Additionally, polar molecules tend to have stronger van der Waals forces compared to nonpolar molecules.
Based on this information, we can predict that H2 and O2, which are both small nonpolar molecules, would have the lowest van der Waals correction for intermolecular attractions. Cl2, on the other hand, is a larger nonpolar molecule, so it would have a higher correction.

NH3, despite being smaller than Cl2, is polar and therefore would have a higher correction due to stronger van der Waals forces.  This is because van der Waals corrections account for two factors: the size of the gas particles and the strength of the intermolecular forces. In this case, we are looking for the gas with the weakest intermolecular forces.

To know more about  intermolecular attractions visit:-

https://brainly.com/question/30425720

#SPJ11

The number of sub levels within each energy level of an atom is equal to the value of the principal quantum number. The correct option is (a) principal quantum number.

The principal quantum number, also known as the energy level, determines the overall energy of an electron within an atom.

Each energy level can contain one or more sub-levels, which are identified by the angular momentum quantum number (l). The value of l can range from 0 to n-1, where n is the principal quantum number.

Each sub-level can further be broken down into orbitals, which are identified by the magnetic quantum number (m). The spin quantum number (s) determines the spin of the electron within an orbital.

Therefore, the principal quantum number determines the number of sub-levels within each energy level of an atom.

Visit here to learn more about Atom:

brainly.com/question/17545314

#SPJ11

To find the molecular formula of the compound, we need to know its molar mass. We can calculate the molar mass of the empirical formula C3H4O3 as follows:Molar mass of C3H4O3 = (3 x atomic mass of C) + (4 x atomic mass of H) + (3 x atomic mass of O)

= (3 x 12.01 g/mol) + (4 x 1.01 g/mol) + (3 x 16.00 g/mol)

= 72.06 g/mol

Next, we can calculate the empirical formula mass of C3H4O3:

Empirical formula mass of C3H4O3 = (3 x atomic mass of C) + (4 x atomic mass of H) + (3 x atomic mass of O)

= (3 x 12.01 g/mol) + (4 x 1.01 g/mol) + (3 x 16.00 g/mol)

= 72.06 g/mol

We can then use the molar mass and empirical formula mass to find the molecular formula:

Molecular formula = (Molar mass of the compound) / (Empirical formula mass of the compound)

Molecular formula = (308.2 g/mol) / (72.06 g/mol)

Molecular formula = 4.28

The molecular formula is not a whole number, so we need to multiply both the empirical formula and the molecular formula by a factor to obtain a whole number for the molecular formula. We can multiply the empirical formula by 2 to obtain the molecular formula:

Empirical formula x 2 = C6H8O6

Therefore, the molecular formula of the compound is C6H8O6.

To know more about molecular visit :

https://brainly.com/question/156574

#SPJ11

The molecular formula of the compound is C6H8O6. when  the empirical formula of this compound is c3h4o3 and it is determined that 1.75 moles of a compound weigh 308.2 g.

The first step to finding the molecular formula is to calculate the empirical formula mass of C3H4O3, which is 88 g/mol. Next, divide the molar mass of the compound (308.2 g/1.75 mol) by the empirical formula mass to get the ratio of the molecular formula to the empirical formula. This gives us a ratio of 3.5. To get whole numbers, we can multiply both sides of the ratio by 2, giving us a molecular formula of C6H8O6. Therefore, the molecular formula of the compound is C6H8O6.

Hence, To find the molecular formula, first determine the molar mass of the empirical formula (C3H4O3): (3×12.01 g/mol) + (4×1.01 g/mol) + (3×16.00 g/mol) = 88.05 g/mol. Then, divide the given mass of the compound (308.2 g) by the moles (1.75 moles) to find the molar mass of the molecular formula: 308.2 g / 1.75 moles = 176.1 g/mol. Divide the molecular formula's molar mass by the empirical formula's molar mass: 176.1 g/mol / 88.05 g/mol = 2. Multiply the empirical formula by this factor (2) to get the molecular formula: C6H8O6.

To know more about compound  visit

https://brainly.com/question/32127040

#SPJ11

The element with a molar mass closest to 58.67 g/mol is nickel (Ni), which has a molar mass of 58.69 g/mol. Therefore, the element is nickel.

To identify the element, we'll first calculate the molar mass. In a face-centered cubic lattice, there are 4 atoms per unit cell. The unit cell volume can be calculated as V = (0.352 nm)^3 = 4.37 x 10^-23 cm^3. Given the density, we can find the mass of the unit cell: mass = density x volume = 8.90 g/cm^3 x 4.37 x 10^-23 cm^3 = 3.89 x 10^-22 g.

Now, we can determine the molar mass: molar mass = (mass of unit cell) / (number of atoms per unit cell) x Avogadro's number = (3.89 x 10^-22 g) / 4 x 6.022 x 10^23 = 58.67 g/mol.

The element with a molar mass closest to 58.67 g/mol is nickel (Ni), which has a molar mass of 58.69 g/mol. Therefore, the element is nickel.

To know about lattice:

https://brainly.com/question/31670105

#SPJ11

The empirical formula of the compound containing only carbon and hydrogen is C2H5.

To determine the empirical formula of the compound, we need to find the ratios of the elements in the compound.
First, we need to convert the given masses of CO2 and H2O into moles. The molar mass of CO2 is 44.01 g/mol, so 1.60 g of CO2 is 1.60/44.01 = 0.0364 moles. The molar mass of H2O is 18.02 g/mol, so 0.819 g of H2O is 0.819/18.02 = 0.0454 moles.
Next, we need to use the mole ratios of CO2 and H2O to determine the mole ratios of carbon and hydrogen in the compound. Each mole of CO2 contains one mole of carbon, so there are 0.0364 moles of carbon in the compound. Each mole of H2O contains two moles of hydrogen, so there are 0.0908 moles of hydrogen in the compound (0.0454 moles x 2).
Finally, we can find the empirical formula by dividing the number of moles of each element by the smallest number of moles. In this case, the smallest number of moles is 0.0364 moles of carbon. Dividing 0.0364 moles of carbon by 0.0364 gives us 1, and dividing 0.0908 moles of hydrogen by 0.0364 gives us 2.5. Since we can't have a fraction in a formula, we need to multiply everything by 2 to get whole numbers. Therefore, the empirical formula of the compound is C2H5.
In conclusion, the empirical formula of the compound containing only carbon and hydrogen is C2H5.
To know more about empirical formula visit:

https://brainly.com/question/14044066

#SPJ11

The two classes of mixtures based on their appearance are homogeneous mixtures and heterogeneous mixtures.

Homogeneous mixtures are uniform throughout and have the same composition and properties in all parts of the mixture. Examples include saltwater and air. Heterogeneous mixtures, on the other hand, have visibly different parts and are not uniform throughout. The composition and properties of the mixture may vary from one part to another.

Examples include sand and water, oil and water, and a salad with different ingredients. The distinction between the two types of mixtures is important in chemistry and physics, as it affects how the mixture behaves and how it can be separated. Homogeneous mixtures have only one phase, while heterogeneous mixtures have multiple phases.

Separation of mixtures is often based on their appearance, with methods like filtration and decantation used to separate heterogeneous mixtures, while methods like distillation and chromatography are used for homogeneous mixtures.

Learn more about mixture here:

https://brainly.com/question/30587533

#SPJ11

The answer is A: H₂SO4 + 2LIOH → Li2SO4 + 2H2O

Answer:

H₂SO4 + 2LIOH → Li2SO4 + 2H2O

Explanation:

The balanced equation that represents a neutralization reaction is:

H₂SO4 + 2LIOH → Li2SO4 + 2H2O

This is a neutralization reaction because the acidic hydrogen ions (H+) in sulfuric acid (H₂SO4) react with the basic hydroxide ions (OH-) in lithium hydroxide (LiOH) to form water (H2O) and a salt (Li2SO4). The resulting solution will be neutral as the acid and base have neutralized each other.

The gas with the highest density among He, Cl2, CH4, and NH3 at 0°C and 1 atm pressure is Cl2 (B).

To determine the density of each gas, we can use the equation:
Density = (mass) / (volume)
Since all the flasks have the same volume (1.0 L) and are at the same temperature and pressure, we can compare their densities based on their molar masses. Here are the molar masses of the given gases:
- He: 4 g/mol
- Cl2: 70 g/mol (35 g/mol * 2, as Cl2 is diatomic)
- CH4: 16 g/mol (12 g/mol for C and 1 g/mol * 4 for H)
- NH3: 17 g/mol (14 g/mol for N and 1 g/mol * 3 for H)
As we can see, Cl2 has the highest molar mass, and consequently, the highest density among the given gases.
To know more about Highest density visit:

https://brainly.com/question/30544850

#SPJ11

The concentration of the original HCl solution is 0.1212 M.

In this titration experiment, the student used phenolphthalein as an indicator to pinpoint the point at which sodium hydroxide (NaOH) and hydrochloric acid (HCl) began to react. The pH-sensitive indicator phenolphthalein transforms from colourless to pink as the solution's pH moves from acidic to basic. To the flask holding 25.00 millilitres of HCl, the student added three drops of phenolphthalein. When one drop caused the indicator to turn light pink, the student added 0.150 M NaOH to the flask gradually using a buret. It's clear from this that the equivalence point has been reached and that all of the HCl has interacted with the NaOH. A total volume of 20.20 millilitres of NaOH, according to the student, was utilised in this titration. Using the data provided, we can calculate the amount of HCl in the original solution. The balanced chemical equation for the reaction between HCl and NaOH is:
HCl + NaOH → NaCl + H2O
From this equation, we know that one mole of HCl reacts with one mole of NaOH. Therefore, the number of moles of NaOH used in the titration is equal to the number of moles of HCl in the original solution.
To calculate the number of moles of NaOH used, we can use the formula:
moles NaOH = concentration (M) x volume (L)
Substituting the values, we get:
moles NaOH = 0.150 M x 0.02020 L = 0.00303 moles NaOH
Since one mole of NaOH reacts with one mole of HCl, the number of moles of HCl in the original solution is also 0.00303 moles. To calculate the concentration of HCl, we can use the formula:
concentration HCl = moles HCl / volume (L)
Substituting the values, we get:
concentration HCl = 0.00303 moles / 0.02500 L = 0.1212 M
For more such questions on concentration

https://brainly.com/question/28564792

#SPJ11

For many, the point of paying attention to diet and exercise is to lose weight. However, in many cases, people will not see the kinds of dramatic changes in their weight that they are looking for due to body composition and other factors. They should still stick to these changes to observe the remarkable result.

Maintaining physical and mental health and well-being requires a good, balanced diet and regular exercise. A healthier lifestyle is linked to better sleep and happiness in addition to being useful in preventing excessive weight gain or maintaining weight loss. For many, the point of paying attention to diet and exercise is to lose weight. However, in many cases, people will not see the kinds of dramatic changes in their weight that they are looking for due to body composition and other factors. They should still stick to these changes to observe the remarkable result.

To know more about health, here:

https://brainly.in/question/17338646

#SPJ1

After three days, the amount of the isotope that remains would be 12.5%. It's worth noting that the half-life of an isotope determines how quickly it decays and can be used to calculate the remaining amount at any given time.

Assuming the initial amount of the isotope is 100%, at the end of one day, half of it would have decayed, leaving 50% of the initial amount. At the end of the second day, half of the remaining 50% would have decayed, leaving 25% of the initial amount. Finally, at the end of the third day, half of the remaining 25% would have decayed, leaving only 12.5% of the initial amount.

Therefore, after three days, the amount of the isotope that remains would be 12.5%. It's worth noting that the half-life of an isotope determines how quickly it decays and can be used to calculate the remaining amount at any given time.

An isotope with a half-life of one day means that half of its initial amount will decay in a day. After three days, the isotope will undergo three half-life cycles. On the first day, 50% remains. On the second day, half of the remaining 50% decays, leaving 25%. Finally, on the third day, half of the remaining 25% decays, leaving 12.5%. Thus, at the end of three days, 12.5% of the original isotope amount remains.

To know about isotope visit:

https://brainly.com/question/28039996

#SPJ11

Answer:D. 6.289

Explanation:

Narcoleptic patients have reduced levels of hypocretin/orexin in their brains.

Narcolepsy is a neurological disorder that affects the ability to regulate sleep-wake cycles. One of the main symptoms of narcolepsy is excessive daytime sleepiness, which can be debilitating for those affected.

Research has shown that people with narcolepsy have significantly lower levels of a neurotransmitter called hypocretin (also known as orexin) in their brains.

Hypocretin is produced by cells in a part of the brain called the hypothalamus, and it plays a critical role in regulating sleep and wakefulness.

The exact cause of the loss of hypocretin-producing cells in people with narcolepsy is not fully understood, but it is thought to involve an autoimmune reaction that damages these cells.

Visit here to learn more about Narcoleptic:

brainly.com/question/29845378

#SPJ11

The categorization is

Voges-Proskauer: Butanediol fermentation, Barritt's reagents

Methyl Red: Mixed-acid fermentation, Low pH

Catalase: Peroxide, Aerobic respiration

Voges-Proskauer (VP) test is used to detect the production of acetoin, a metabolic intermediate in butanediol fermentation. The VP test involves the addition of Barritt's reagents, which contain alpha-naphthol and potassium hydroxide, to the bacterial culture. If acetoin is present, a red color develops, indicating a positive VP test.

Methyl Red (MR) test is used to determine if an organism carries out mixed-acid fermentation. In this test, the pH of the medium is lowered, and if the bacteria produce large amounts of stable acid products, the pH remains low, resulting in a positive MR test.

Catalase testing is used to determine the presence of the enzyme catalase, which catalyzes the breakdown of hydrogen peroxide into water and oxygen. Catalase is produced in organisms that carry out aerobic respiration, which uses oxygen as the final electron acceptor.

To know more about methyl-red: https://brainly.com/question/32153999

#SPJ11

The density of chromium metal is (2 atoms x 52.00 g/mol) / (1.5625 x 10^-23 cm^3) = 6.99 g/cm^3.The body-centered cubic lattice has an atom at each corner of the cube and one in the center, making a total of 2 atoms per unit cell.

The edge length of the cube can be calculated using the atomic radius, which is 2 times the radius of an atom. Therefore, the edge length (a) is 2.5 angstroms. The volume of the unit cell can be calculated as a^3, which is 15.625 cubic angstroms. To convert this to cubic centimeters, we need to divide by 10^24. Therefore, the volume of the unit cell is 1.5625 x 10^-23 cm^3. The atomic weight of chromium is 52.00 g/mol. Hence, the density of chromium metal is (2 atoms x 52.00 g/mol) / (1.5625 x 10^-23 cm^3) = 6.99 g/cm^3.

To learn more about lattice here

https://brainly.com/question/31670105

#SPJ11

The major organic product of the acid-base reaction between CH₃CH₂CH₂CH₂Li and CH₃COOH is CH₃CH₂CH₂CH₂COOH, also known as pentanoic acid.

In this reaction, the CH₃CH₂CH₂CH₂Li compound acts as a strong base, and it reacts with the acidic proton of CH₃COOH to form a carboxylic acid. The organic product formed is a carboxylic acid with one additional carbon atom compared to the starting material. The reaction follows the general equation:

R-Li + R'-COOH → R-COOH + R'-Li

The product, pentanoic acid, is a straight-chain saturated fatty acid with a five-carbon chain and a carboxyl group at the end of the chain. Pentanoic acid is a colorless, oily liquid that is soluble in water and has a strong, unpleasant odor. It is commonly used in the synthesis of pharmaceuticals, fragrances, and flavors.

To know more about pentanoic acid, refer here:

https://brainly.com/question/16945257#

#SPJ11

The chemical experiments black can had a low albedo, absorbed more heat, and therefore ended up getting hotter than the silver can.

The black can ended up getting hotter because of its ability to absorb more heat than the silver can. The color of an object determines how much light it reflects or absorbs. The black can absorbs more light and thus more heat, whereas the silver can reflects more light and heat.

When the heating lamp is turned on, both cans are exposed to the same amount of light and heat. The black can absorbs more of the light and heat, and therefore heats up faster and to a higher temperature than the silver can.

The difference in temperature between the black can and the silver can can be attributed to a phenomenon called albedo. Albedo is the measure of an object's reflectivity or ability to reflect light. A high albedo means that an object reflects more light, whereas a low albedo means that an object absorbs more light.

In this experiment, the black can had a low albedo and absorbed more light and heat, whereas the silver can had a high albedo and reflected more light and heat. This explains why the black can ended up getting hotter than the silver can.

To learn more about chemical experiments, refer:

https://brainly.com/question/32063305

#SPJ1

The rate constant for this reaction is 0.0488 s^-1. To find the rate constant for a first-order reaction, we use the equation: ln([A]t/[A]0) = -kt, where [A]t is the concentration at time t, [A]0 is the initial concentration, k is the rate constant, and t is time.

Using the given concentrations, we can plug them into the equation:

ln(7.80x10^-3M/9.20x10^-2M) = -k(85.0s - 30.0s)

Simplifying and solving for k, we get:

k = (ln(9.20x10^-2M/7.80x10^-3M))/(85.0s - 30.0s)

k = 0.0488 s^-1

Therefore, the rate constant for this reaction is 0.0488 s^-1.

learn more about the reaction here

https://brainly.com/question/30464598

#SPJ11

Photons of light with shorter wavelengths, such as violet or blue light, possess the greatest amount of energy.

The energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength.

Since frequency and wavelength are inversely related, photons with shorter wavelengths have higher frequencies and therefore more energy.

Therefore, violet or blue light, which have the shortest wavelengths of visible light, possess the greatest amount of energy. Conversely, photons of light with longer wavelengths, such as red or orange light, have less energy.

This relationship between wavelength and energy is important in fields such as optics, spectroscopy, and quantum mechanics.

Visit here to learn more about Energy:  

brainly.com/question/13881533

#SPJ11

When a balloon full of helium rises 1000 feet, the atmospheric pressure decreases as altitude increases. This means that the pressure inside the balloon will be greater than the pressure outside the balloon. As a result, the helium molecules will spread out and expand to fill the available space.

According to the ideal gas law, PV = nRT, the pressure (P) and volume (V) of a gas are inversely proportional to each other, assuming constant temperature (T) and number of molecules (n). This means that as the pressure inside the balloon decreases, the volume of the balloon will increase, causing the density of the helium to decrease.


The density of helium decreases. As the balloon rises, the atmospheric pressure decreases. The decrease in pressure allows the helium inside the balloon to expand, which results in a decrease in the density of the helium.

To know more about pressure visit:-

https://brainly.com/question/20330261

#SPJ11

The solution that will turn litmus from red to blue is NH₃(aq), thus NH₃(aq) is a basic solution. H₂S(aq) and SO₂(aq) are acidic solutions, while CO₂(aq) is neutral.


Litmus is a natural indicator that changes color based on the pH of a solution. Red litmus turns blue in basic or alkaline solutions with a pH above 7. Among the given answer choices, only NH₃(aq) is a basic solution. NH₃ is the chemical formula for ammonia, a colorless gas that dissolves in water to form ammonium hydroxide, a strong base.

When NH₃(aq) is added to red litmus, it accepts a proton (H⁺) from the litmus, converting the litmus indicator to its blue form. H₂S(aq) and SO₂(aq) are acidic solutions, while CO₂(aq) is neutral. Therefore, NH₃(aq) is the correct answer to the given question.

Learn more about litmus here:

https://brainly.com/question/14388413

#SPJ11

Answer: If the potential energy of a football when hit is 80J, what will its mass in grams be if it reaches a height of 40 meters?

Explanation:

We can use the formula for gravitational potential energy:

PE = mgh

where PE is the potential energy, m is the mass, g is the acceleration due to gravity, and h is the height.

We can rearrange this formula to solve for the mass:

m = PE / gh

Plugging in the given values, we get:

m = 80 J / (9.81 m/s^2 * 40 m)

Simplifying, we get:

m = 0.204 kg

To convert this to grams, we multiply by 1000:

m = 204 g

Therefore, the mass of the football is 204 grams if it reaches a height of 40 meters with a potential energy of 80 J.

{I Hope This Helps! :)}

To calculate the percentage, we need a balanced chemical equation for the reaction. However, assuming a hypothetical reaction,  the balanced equation is:

Cu H2SO4 -> CuSO4 H2

If the mass of copper (II) sulfate crystals formed is 4.6 g, we must determine the theoretical yield. We can calculate the molar mass of CuSO4 (which is 159.6 g/mol) and use that mass to convert to moles. We then compare the actual return to the theoretical return:

Percentage Return = (Actual Return / Theoretical Return) × 100

Without a specific reaction, we cannot calculate the exact percentage yield. Therefore, enter a balanced chemical equation for a more accurate calculation.

Learn more about copper at :

https://brainly.com/question/13102529

#SPJ1

Answer:

The east hemisphere.

Explanation:

Simply use a compass of sort to determine the hemisphere in the image.

North^ South v East > West <

After the reduction of the ketone using borohydride, you need to add an acidic solution such as water/HCl to destroy the excess borohydride.

This is because borohydride is a strong reducing agent and can react with other functional groups in the reaction mixture. The acidic solution protonates the borohydride ion, forming hydrogen gas and borate ions, which are soluble and can be easily removed from the reaction mixture.

Adding other reagents such as hexanes, phenoxide ion, ethanol or acetic anhydride would not effectively destroy the excess borohydride and could lead to unwanted side reactions.  

To know more about reaction visit:

https://brainly.com/question/11231920

#SPJ11

The partial pressure of argon in the gas mixture is 285 mmHg.To calculate the partial pressure of argon, we need to use the mole fraction of argon in the gas mixture.

The mole fraction is the number of moles of a gas divided by the total number of moles in the mixture.

The total number of moles in the mixture is 1.5 + 2.0 + 0.5 = 4.0 moles.

The mole fraction of argon is therefore 1.5/4.0 = 0.375.

To find the partial pressure of argon, we multiply the mole fraction by the total pressure of the gas mixture:

Partial pressure of argon = 0.375 x 760 mmHg = 285 mmHg

Therefore, the partial pressure of argon in the gas mixture is 285 mmHg.

To know about argon visit:

https://brainly.com/question/12032224

#SPJ11

Yes, a change in the molality causes the boiling point of a solution to increase. Molality refers to the number of moles of solute present in a kilogram of solvent. It's important to note that when solute particles are added to a solvent, the solution's boiling point increases and the freezing point decreases.

There is a direct relationship between the molality of a solution and its boiling point. When a solute is dissolved in a solvent, the solution's boiling point increases. The solute particles have a greater influence on the solution's properties than the solvent particles, which results in an increase in the solution's boiling point.

The boiling point of a solution is greater than that of the pure solvent due to the presence of a solute. As a result, the boiling point of a solution can be used to determine the solute's molecular weight. The difference between the boiling points of a pure solvent and a solution of the same solvent and solute is proportional to the solute's molality.

To know more about molality visit:

https://brainly.com/question/30640726

#SPJ11

The given chemical equation, ad2 r3 → a2r2 d, is not balanced because the number of atoms of each element is not the same on both sides of the equation.

The first step in balancing the equation is to count the number of atoms of each element on both sides and identify which elements are not balanced.

On the left side, we have two atoms of A, two atoms of D, and three atoms of R. On the right side, we have two atoms of A, two atoms of D, and two atoms of R.

To balance the equation, we need to adjust the coefficients of the reactants and products to ensure that the same number of atoms of each element appears on both sides of the equation.

By adjusting the coefficients, we can balance the equation as follows: 2AD2R3 → 2A2R2D.

After balancing, the number of atoms of each element is the same on both sides, with two atoms of A, two atoms of D, and two atoms of R on both sides.

This balanced chemical equation shows that two molecules of AD2R3 react to form two molecules of A2R2D. Balancing chemical equations is an important step in chemical reactions, as it ensures that the law of conservation of mass is maintained.

To know more about   chemical equation refer here

brainly.com/question/20492533#

#SPJ11

A first-order reaction has a rate constant it would take approximately 536 seconds for the reaction to be 43.6% complete.

The integrated rate law for a first-order reaction is:

ln([A]t/[A]0) = -kt

where [A]t is the concentration of reactant at time t, [A]0 is the initial concentration of reactant, k is the rate constant, and t is time.

To find the time required for the reaction to be 43.6% complete, we can rearrange the integrated rate law:

ln([A]t/[A]0) = -kt

ln(0.436/[A]0) = -3.6 x 10^-3 s^-1 * t

Solving for t:

t = -ln(0.436/[A]0) / (3.6 x 10^-3 s^-1)

Assuming [A]0 = [A]t (i.e., the reaction is starting with 100% of the reactant), we have:

t = -ln(0.436) / (3.6 x 10^-3 s^-1)

t = 536 seconds (rounded to three significant figures)

Therefore, it would take approximately 536 seconds for the reaction to be 43.6% complete.

For more details regarding rate constant, visit:

https://brainly.com/question/31805239

#SPJ1

The label "0.2 M KNO3" indicates that the solution contains potassium nitrate (KNO3) at a concentration of 0.2 moles per liter (M).

In chemistry, molarity (M) is a unit of concentration that expresses the number of moles of a solute dissolved in one liter of a solution. A mole is a unit of measurement used to express the amount of a substance, and is defined as the amount of a substance that contains the same number of entities (such as atoms, molecules, or ions) as there are in 12 grams of carbon-12.

So, in this case, a solution with a concentration of 0.2 M KNO3 contains 0.2 moles of KNO3 dissolved in one liter of solution. It is important to note that molarity is temperature-dependent and may change with changes in temperature, so it is important to specify the temperature at which the measurement was taken.

Learn more about potassium here:

https://brainly.com/question/13321031

#SPJ11