Name two types of em waves which are used by police force

Answer:

partial solar eclipse

Explanation:

A partial solar eclipse happens when the Moon passes between the Sun and Earth but the Sun, Moon, and Earth are not perfectly lined up. Only a part of the Sun will appear to be covered, giving it a crescent shape.

The order of the power plants from lowest to highest for their capital investment costs would be: 1: Wind 2: Gas 3: Coal 4: Nuclear

Wind power plants have the lowest capital investment costs due to the use of wind turbines which require minimal infrastructure and maintenance. Gas power plants have a slightly higher capital investment cost due to the need for natural gas pipelines and storage facilities. Coal power plants require significant investment in mining, transportation, and infrastructure, making them more costly than gas plants. Nuclear power plants have the highest capital investment costs due to the need for specialized equipment, high security measures, and regulatory compliance. While nuclear power plants have higher capital investment costs, they also have lower operating costs over time. Overall, the cost of capital investment for each type of power plant varies depending on the location, size, and technology used.

To know more about power visit:

https://brainly.com/question/6879713

#SPJ11

To find the angular speed of the pulley when M1 has moved 3 meters, we can use the principle of conservation of mechanical energy.

By equating the initial potential energy of M1 to the final mechanical energy of the system, we can solve for the angular speed of the pulley. Given the masses, radii, and rotational inertia of the pulley, we can calculate the required variables and find the angular speed in rad/s.

The initial potential energy of M1 is given by mgh, where m is the mass of M1, g is the acceleration due to gravity, and h is the height through which M1 has moved. Since M1 has moved 3 meters, the initial potential energy is (5 kg) * (9.8 m/s^2) * (3 m) = 147 J.

The final mechanical energy of the system is the sum of the potential energy and the rotational kinetic energy of the pulley. The rotational kinetic energy of the pulley is given by (1/2) * I * ω^2, where I is the rotational inertia of the pulley and ω is the angular speed. We are asked to find the angular speed, so we rearrange the equation to solve for ω:

ω = sqrt((2 * (147 J)) / (0.33 kgm^2)) = 6.47 rad/s.

Therefore, the angular speed of the pulley when M1 has moved 3 meters is approximately 6.47 rad/s.

Learn more about angular speed here:

https://brainly.com/question/29058152

#SPJ11

For a rotating object, the acceleration directed toward the center of rotation is called centripetal acceleration.

Centripetal acceleration is a type of acceleration that occurs when an object moves in a circular path. It is always directed toward the center of the circle and keeps the object moving along its path. The magnitude of the centripetal acceleration is given by the formula a = v^2/r, where v is the velocity of the object and r is the radius of the circular path. The direction of the centripetal acceleration is constantly changing as the object moves around the circle, but it always points toward the center.

This acceleration is necessary to keep the object moving in a circular path, as any object in motion tends to continue moving in a straight line. Without centripetal acceleration, the object would fly off the circular path. Centripetal acceleration is used in many everyday applications, such as in amusement park rides and the motion of planets around the sun.

Learn more about centripetal acceleration here:

https://brainly.com/question/17123770

#SPJ11

The power consumption of the relay's coil is 48.6 mW and The 522 9-v battery with a capacity of 500 mAh can operate such a relay for about 92.6 hours (approx.).

To calculate the power consumption of the relay's coil, we need to use the formula:

Power = Voltage x Current

We know that the voltage of the battery is 9V and the current drawn by the relay is 5.4 mA (milliamps). So, we can calculate the power consumption of the relay's coil as:

Power = 9V x 5.4 mA = 48.6 mW (milliwatts)

Therefore, the power consumption of the relay's coil is 48.6 mW.

Now, to calculate how long the energizer 522 9-v battery can operate such a relay, we need to consider the battery capacity. The capacity of a battery is usually given in milliampere-hours (mAh), which represents how many hours the battery can supply a certain current before it gets depleted.

Unfortunately, the capacity of the 522 battery is not given in the question, so we cannot give an exact answer. However, we can make an estimation based on the average capacity of a 9V battery, which is around 400-600 mAh.

Assuming a battery capacity of 500 mAh, we can use the following formula to calculate the operating time:

Operating time = Battery capacity / Current drawn by the relay

We know that the current drawn by the relay is 5.4 mA, so we can plug in the values and get:

Operating time = 500 mAh / 5.4 mA = 92.6 hours (approx.)

However, this is just an estimation and the actual operating time may vary depending on the specific battery used and the conditions of use.

To know more about power consumption visit:-

https://brainly.com/question/30122759

#SPJ11

The newtons of gravitational force downward does this child produce is (Z * 0.453592) * 9.81 Newtons.

To find the gravitational force downward produced by a child, you need to use the formula;

F = m * g

Where F is the gravitational force, m is the mass of the object, and g is the acceleration due to gravity (which is 9.81 m/s²).

The child weighs Z pounds, to find its mass, you'll need to convert pounds to kilograms.1 pound is equal to 0.453592 kilograms, so:mass = Z * 0.453592 kg The gravitational force produced by the child is therefore:

F = mass * g

Substituting mass and g into the formula:

F = (Z * 0.453592) * 9.81 Newtons

Hence, the newtons of gravitational force downward does this child produce is (Z * 0.453592) * 9.81 Newtons.

Learn more about gravitational force https://brainly.com/question/27943482

#SPJ11

As a woman holding her breath swims deeper and deeper beneath the water's surface, her density (mass per unit volume) increases. This is because water pressure increases with depth, causing compression of the air in the lungs, making the lungs and the woman's body more compact.

The decreased volume of the lungs and the increased pressure on the body cause an increase in the woman's density, making it easier for her to sink. Once the woman reaches a certain depth, she will no longer be able to sink because her buoyancy force is equal to her weight. At this point, she will stop sinking and start to float.

To know more about breath swims click this link -

brainly.com/question/31565874

#SPJ11

The image formed by a converging lens can be determined using the lens formula, 1/f = 1/v - 1/u

Where,- f is the focal length of the lens,- v is the distance of the image from the lens, - u is the distance of the object from the lens

In this case, the object distance (u) is given as 12 cm and the focal length (f) is 4.0 cm. Plugging these values into the lens formula, we can solve for the image distance (v),1/4.0 = 1/v - 1/12

Simplifying the equation:

1/v = 1/4.0 + 1/12

1/v = (3 + 1)/12

1/v = 4/12

1/v = 1/3

Taking the reciprocal of both sides, v = 3 cm. Therefore, the image is formed 3 cm in front of the lens.

To know more about converging lens click here:

brainly.com/question/11659963

#SPJ11

To find the average density of the rod, we need to consider the entire length of the rod and not just a particular section of it. The linear density of the rod is given as kg/m, which means that the mass of 1 meter length of the rod is kg. We can use this information to find the total mass of the rod, which is simply the linear density multiplied by the length of the rod.

The total mass of the rod = linear density x length of the rod
= kg/m x 8 meters
= 8kg

Now, the density of the rod can be calculated by dividing the total mass by the total volume. The volume of the rod is simply the length of the rod multiplied by its cross-sectional area. However, we are not given the cross-sectional area of the rod, so we cannot find the exact density of the rod.

Therefore, we can only provide a general formula to calculate the density of a rod given its linear density and length. The formula is:
Density of the rod = (Linear density x π x r^2) / Length
where r is the radius of the rod.

To know more about density visit:

https://brainly.com/question/29775886

#SPJ11

The results differ because Dr. Hernandez and Dr. Osman used different formulas to calculate power. Power is defined as the rate at which energy is transferred, and it can be calculated by dividing the energy by the time.

Dr. Hernandez correctly used this formula and found the power to be 3 J/s.

However, Dr. Osman made an error and divided the energy by the wrong time value, which led to an incorrect result of 2700 J/s.

It is possible that Dr. Osman used a time value of 1/30 s instead of 30 s, resulting in a much higher power value.

This highlights the importance of double-checking calculations and using the correct formula in scientific research to ensure accurate and reliable results.

To know more about Power please visit...

brainly.com/question/18047792

#SPJ11

This means that the magnetic field at the given point is zero since the two magnetic fields cancel each other out.

To find the magnitude of the magnetic field at the given point, we can use the formula for the magnetic field produced by a long straight wire:
B = μ0I / (2πr)

Where B is the magnetic field, μ0 is the permeability of free space (4π x 10^-7 T*m/A), I is the current in the wire, and r is the distance from the wire.

For the wire that is 10 cm away, we have:
B1 = (4π x 10^-7 T*m/A) * 3 A / (2π * 0.1 m) = 1.2 x 10^-5 T

For the wire that is 30 cm away, we have:
B2 = (4π x 10^-7 T*m/A) * (-3 A) / (2π * 0.3 m) = -1.2 x 10^-5 T

Note that the magnetic field produced by the second wire is negative because the currents are flowing in opposite directions. Therefore, the net magnetic field at the given point is:
Bnet = B1 + B2 = 0

To know more about magnetic fields visit:

https://brainly.com/question/19542022

#SPJ11

If you double the weight of your vehicle, it would take approximately twice as long to stop.

This is because the kinetic energy of the vehicle is directly proportional to its mass (weight), and the brakes must dissipate this energy to bring the vehicle to a stop.

When a heavier vehicle is moving at the same speed as a lighter vehicle, it has more kinetic energy and therefore requires more force to stop. This means that the brakes must work harder and longer to bring the vehicle to a stop.

Therefore, doubling the weight of a vehicle would roughly double the amount of time required to bring it to a stop.

To know more about distance , refer here :

https://brainly.com/question/13034462#

#SPJ11

A magnet will attract an ordinary nail or paper clip because they are made of ferromagnetic materials, which are materials that can be magnetized and are strongly attracted to magnets. When a magnet is brought near a ferromagnetic material, it creates a magnetic field within the material, causing the material to become magnetized and creating an attractive force between the two.

On the other hand, a wooden pencil is not a ferromagnetic material and is not attracted to magnets. Wood is composed mainly of non-magnetic materials such as cellulose, hemicellulose, and lignin, which are not affected by magnetic fields. Therefore, the magnet will not create a magnetic field within the pencil, and there will be no attractive force between the two.

To know more about magnet click this link -

brainly.com/question/3617233

#SPJ11

To give the three spheres equal negative charge using a positively charged Van de Graaff generator, we can follow these steps:

Bring the positively charged Van de Graaff generator near the first sphere. The generator will induce a negative charge on the side of the sphere closest to the generator and a positive charge on the opposite side.

Touch the negative side of the first sphere with a conducting wire to transfer the excess negative charge to the second sphere.

Touch the negative side of the second sphere with a different conducting wire to transfer the excess negative charge to the third sphere.

The three spheres should now have equal negative charges.

It is important to use different wires for each transfer to prevent any unequal distribution of charge. The Van de Graaff generator should also be kept at a safe distance to avoid any accidental discharge.

To know more about Van de Graaff generator click this link -

brainly.com/question/31871736

#SPJ11

The pressurized cabin of an airplane flying at high altitude is an example of a controlled environment. The air pressure outside an aircraft at high altitude is lower than that at ground level, and the temperature is also extremely low.

Without a pressurized cabin, passengers and crew would suffer from the lack of oxygen and atmospheric pressure, which could result in hypoxia and other serious medical conditions. To prevent this, aircraft are designed with a pressurized cabin that provides a controlled environment with a comfortable temperature and normal atmospheric pressure, similar to what we experience at ground level. The cabin is pressurized by compressing air from the engines and mixing it with fresh air from outside the aircraft, which is then distributed throughout the cabin to maintain a safe and comfortable environment for passengers and crew.

To know more about airplane flying click this link -

brainly.com/question/18559302

#SPJ11

The time between the arrival of P waves and S waves becomes greater as you get further away from the epicenter because seismic waves travel at different speeds through different types of rocks and materials.

P waves are longitudinal waves that can travel through solid and liquid materials, whereas S waves are transverse waves that can only travel through solid materials. Because S waves are slower than P waves and can only travel through solid materials, they arrive at a seismometer later than P waves.

As the distance from the epicenter increases, the path the seismic waves must travel becomes longer, and the waves encounter more and different types of materials. This causes the waves to slow down, especially the S waves, which can only travel through solid materials and are more easily slowed or blocked. This delay in the arrival of the S waves relative to the P waves is used by seismologists to determine the distance from the epicenter of an earthquake to a particular seismometer station.

To know more about waves click this link -

brainly.com/question/29334933

#SPJ11

According to scientific studies, the age of planet Earth is estimated to be around 4.54 billion years old. Therefore, our planet has been around for approximately one galactic year, as one galactic year is equivalent to the time it takes for the Milky Way to make one rotation around its center. This means that Earth has been through countless changes and evolutions over the course of its existence.

In the grand scheme of the universe, a billion years might seem like a long time, but it's a mere blip in the cosmic timeline. The universe is estimated to be around 13.8 billion years old, and galaxies, stars, and planets have been forming and evolving since its inception. It's difficult for us to grasp the vastness of time and space, but it's important to remember that we are just a small part of the grand cosmic scheme.

Reflecting on the time scales of the universe can give us a greater appreciation for the complexity and beauty of the cosmos. It can also remind us of our responsibility to take care of our planet, as it's the only home we have in this vast and awe-inspiring universe.

To know more about planet earth visit:

https://brainly.com/question/21698090

#SPJ11

This process is called an adiabatic process, when a parcel of air expands and cools, or compresses and warms, with no interchange of heat with its outside surroundings.

In thermodynamics, an adiabatic process (Greek: adiábatos, "impassable") is a type of thermodynamic process that occurs without transferring heat or mass between the thermodynamic system and its environment. Unlike an isothermal process, an adiabatic process transfers energy to the surroundings only as work.As a key concept in thermodynamics, the adiabatic process supports the theory that explains the first law of thermodynamics. In an adiabatic process, a parcel of air expands and cools, or compresses and warms, without any interchange of heat with its outside surroundings. So, this process is called an adiabatic process, when a parcel of air expands and cools, or compresses and warms, with no interchange of heat with its outside surroundings.

Learn more about adiabatic process at

https://brainly.com/question/30420499

#SPJ11

The motion of a fish swimming in a fish tank is an example of kinetic energy. Kinetic energy is the energy of motion, and it is the energy an object possesses due to its motion. In this case, the fish is moving through the water, and thus has kinetic energy.

Chemical energy is the energy stored in the bonds of chemical compounds, potential energy is the energy that an object possesses due to its position or configuration, and gravitational energy is the potential energy an object possesses due to its position in a gravitational field.

While all of these types of energy may be involved in the movement of the fish, it is the kinetic energy that is directly related to its motion through the water.

To know more about kinetic energy please visit....

brainly.com/question/30263427

#SPJ11

According to Coulomb's law, the electric field strength generated by a point charge is directly proportional to the magnitude of the charge and inversely proportional to the square of the distance between the charge and the point where the field is measured. So the answer would be e/4 from the given choices.

In this case, if the distance from the charge is doubled, the electric field strength would be reduced by a factor of four (2 squared), and if the charge is doubled, the electric field strength would be doubled. Therefore, if you measure an electric field strength of e at a certain distance from a point charge, when the charge is doubled and your distance from the charge is also doubled, the electric field strength would be e/4 (one-fourth of the original value).

to know more about Coulomb's law visit:

https://brainly.com/question/506926

#SPJ11

To maintain equilibrium, the new distance must be such that the electrostatic force is still equal to the initial force. Therefore, the new equilibrium distance between the balls in the test tube would be √2 times the original distance, or √2 * d, when the charges on both balls are doubled.

The equilibrium distance between the balls in the test tube would decrease. This can be explained by Coulomb's Law, which states that the force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. Therefore, if the charge on each ball is doubled, the force between them will be four times greater than before. In order to maintain equilibrium, the balls must move closer together to decrease the distance between them, thus reducing the force acting on each ball.

When the charge on each small charged plastic ball is doubled, the equilibrium distance between the balls in the frictionless test tube will also change. Initially, the balls are in equilibrium at a distance 'd' apart. The electrostatic force between them is determined by Coulomb's Law, which states that the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. After doubling the charges, the electrostatic force between the balls will increase by a factor of four since the product of the charges is now (2Q) * (2Q) = 4Q^2. In order for the balls to remain in equilibrium, the force must be balanced by an equal and opposite force acting upon them.

To know more about equilibrium visit :-

https://brainly.com/question/31673675

#SPJ11

Magma is molten rock that is below the earth's surface and retains most of its volcanic gases.

Magma is a mixture of molten rock, minerals, and gases that is located below the earth's surface. It is typically generated in the Earth's mantle, and it can move up into the crust due to geological processes like plate tectonics and volcanic activity. Magma is a high-temperature, high-pressure fluid that can be highly viscous, which means it can resist flow.

Magma is often associated with volcanic activity and can lead to the formation of volcanoes. When magma rises to the surface and is released, it is called lava. Magma can also crystallize underground, forming igneous rocks, such as granite and basalt.

Magma can contain a variety of gases, including water vapor, carbon dioxide, and sulfur dioxide. These gases can be released during volcanic eruptions and can have significant impacts on the environment and human health. For example, sulfur dioxide emissions from volcanoes can lead to acid rain and respiratory problems.

To know more about Magma here

https://brainly.com/question/16940653

#SPJ4

To find the speed of the proton (vr) by the time the distance between the particles doubles, we can use the conservation of energy principle. Initially, both the proton and the alpha particle are at rest, so their initial kinetic energy is zero. As they move apart, the electric potential energy between them decreases, and this energy is converted into kinetic energy.

Let's denote the initial distance between the particles as r and the final distance as 2r. The electric potential energy between two charged particles can be given by the equation:

Where:

According to the conservation of energy, the change in potential energy is equal to the change in kinetic energy. Initially, both particles are at rest, so the total energy is purely potential energy. When the distance doubles, the final kinetic energy of the proton can be calculated using the change in potential energy.

Since the change in potential energy is equal to the change in kinetic energy:

Equating the two expressions for the change in energy:

Now we can solve for vr, the speed of the proton:

So, the speed of the proton (vr) by the time the distance between the particles doubles is given by the equation:

where k is the electrostatic constant (8.99 x 10^9 N*m^2/C^2), e is the elementary charge, m is the mass of the proton, and r is the initial distance between the particles.

Learn More About proton at https://brainly.com/question/31821103

#SPJ11

Total, 2.09 x 10⁶ photons of the radio wave are needed to equal the energy of one photon of visible light.

The energy of a photon will be given by the formula;

E = hc/λ

where E will be the energy of the photon, h will be Planck's constant (6.626 x 10⁻³⁴ J.s), c will be the speed of light (3.00 x 10⁸ m/s), and λ will be the wavelength of the photon.

For visible light with a wavelength of 476 nm, the energy of a photon is;

E_visible = hc/λ = (6.626 x 10⁻³⁴ J.s)(3.00 x 10⁸ m/s)/(476 x 10⁻⁹ m)

= 4.16 x 10⁻¹⁹ J

For a radio wave with a wavelength of 1.0 m, the energy of a photon is;

E_radio = hc/λ = (6.626 x 10⁻³⁴ J.s)(3.00 x 10⁸ m/s)/(1.0 m)

= 1.99 x 10⁻²⁵ J

To determine how many photons of the radio wave are needed to equal the energy of one photon of visible light, we divide the energy of one photon of visible light by the energy of one photon of the radio wave;

Number of radio wave photons = E_visible/E_radio

= (4.16 x 10⁻¹⁹ J)/(1.99 x 10⁻²⁵ J)

≈ 2.09 x 10⁶

Therefore, it takes about 2.09 x 10⁶ photons of the radio wave to equal the energy of one photon of visible light.

To know more about radio wave here

https://brainly.com/question/13989450

#SPJ4

The Kidney transplants are a highly sought after treatment option for individuals with kidney failure. However, not everyone who needs a kidney transplant can have potential one due to several reasons. One of the primary reasons is the shortage of donor organs.

There are far fewer organs available than there are individuals who need them. Additionally, not everyone is eligible to receive a transplant. Individuals with certain medical conditions, such as cancer or infections, may not be suitable candidates for a transplant. Age and overall health can also be factors that affect eligibility. Even for those who are eligible and have a suitable donor, the process of finding a compatible donor can be lengthy. Dialysis machines are used to help keep individuals with potential kidney failure alive while they wait for a transplant or until their condition improves. Dialysis can be time-consuming, uncomfortable, and can require multiple sessions a week. In conclusion, while kidney transplants can be a life-changing treatment option for individuals with kidney failure, the scarcity of donors, eligibility requirements, and the time-consuming process of finding a compatible donor can limit access to this treatment option. Dialysis machines remain an essential treatment option for those who cannot receive a transplant.

learn more about potential here.

https://brainly.com/question/16267680

#SPJ11

The width of the slit is approximately 456.25 nanometers.

When light passes through a narrow slit, it diffracts and produces a pattern of bright and dark fringes on a screen. The central maximum is the bright spot in the middle of the pattern, and the first minimum is the first dark fringe on either side of the central maximum.

The angular separation between the first minimum on one side of the central maximum and the first minimum on the other side is called the angular width of the central maximum. This is the angle that we are given in the problem:

θ = 1.28 radians

We can use this angle and the wavelength of the light to calculate the width of the slit.

The relationship between the slit width and the angular width of the central maximum is given by the equation:

θ = λ/d

where λ is the wavelength of the light and d is the width of the slit. This equation tells us that the angular width of the central maximum is inversely proportional to the width of the slit: the narrower the slit, the wider the angular width.

We can rearrange the equation to solve for the slit width:

d = λ/θ

Substituting the values given in the problem, we get:

d = (584 nm) / (1.28 radians)

= 456.25 nm

Therefore, the width of the slit is approximately 456.25 nanometers.

Learn more about wavelength

brainly.com/question/31143857

#SPJ11

The magnetic field on the axis of a long solenoid will increase by increasing the current in the solenoid and  iii. inserting an iron core into the solenoid. Option 1 and 3 are most suitable.

Increasing the current in the solenoid will increase the magnetic field, as the magnetic field in a solenoid is directly proportional to the current.

Inserting an iron core into the solenoid will increase the magnetic field. This is because iron has a higher permeability than air or a vacuum, which effectively increases the value of μ₀ in the equation.

Find more exercises on solenoid;

https://brainly.com/question/15504705

#SPJ1

Since x and y are initially uncharged, when they are in contact, they will share charges to obtain the same potential.

When the positively charged rod r is brought close to x, it will cause a separation of charges in x. The side of x that is closer to the rod r will experience an attractive force and electrons will move towards it, while the other side will experience a repulsive force and electrons will move away from it, leading to a separation of charges.

When y is moved away from x, the charges on the two spheres will no longer be shared, and the charges will redistribute according to the total charge on the two spheres. Since x was negatively charged when the charges were shared and has gained electrons due to the attractive force of rod r, it will retain a negative charge. Similarly, y will have a positive charge as it has lost some electrons to x.

Therefore, the final charge state of x is negative, and the final charge state of y is positive.

To know more about initially uncharged click this link -

brainly.com/question/28286138

#SPJ11

In order for rocket scientists to measure bb>ba, the rocket must travel along the vertical axis, specifically the y-axis, and in an upward direction. This is because "bb" typically represents the final altitude or height, while "ba" refers to the initial altitude or height.

By ensuring that the rocket travels upward along the vertical axis, it ensures a gain in altitude, resulting in a positive difference between the final and initial altitudes (bb - ba). Rocket scientists can then monitor and measure this difference in height to confirm that bb>ba. This measurement is crucial in various applications, such as evaluating rocket performance, determining trajectory, and predicting the apogee or maximum altitude that the rocket will reach.

By focusing on the vertical axis and upward direction, scientists can accurately assess the rocket's altitude change and overall performance.

You can learn more about the vertical axis at: brainly.com/question/30608303

#SPJ11

APC (Anaphase-Promoting Complex) and MDM2 (Mouse Double Minute 2) are both involved in regulating the cell cycle and the activity of specific proteins within the cell.

APC is a multi-subunit protein complex that functions as a ubiquitin ligase, which means that it adds a small protein called ubiquitin to other proteins in order to target them for degradation by the proteasome.

APC is responsible for regulating the progression of the cell cycle from metaphase to anaphase, by promoting the degradation of key proteins that are required for metaphase arrest.

MDM2, on the other hand, is a ubiquitin ligase that targets the tumor suppressor protein p53 for degradation by the proteasome.

p53 is a critical protein that functions to regulate the cell cycle, DNA repair, and apoptosis (programmed cell death), and is mutated or lost in many types of cancer.

MDM2 helps to regulate the activity of p53 by promoting its degradation, thereby preventing p53 from carrying out its normal functions.

So, while APC and MDM2 have different specific targets, they both share the activity of functioning as ubiquitin ligases to regulate the activity of key proteins within the cell.

To know more about APC (Anaphase-Promoting Complex) and MDM2 (Mouse Double Minute 2) refer here

brainly.com/question/29678616#

#SPJ11