number 3 pls and thank u

The percent yield would be 68.3%

This is given as:

Percent yield = yield/theoretical yield x 100%

From the equation:

[tex]2SO_2(g) + O_2(g) -- > 2SO_3(g)[/tex]

The mole ratio of the reactants is 2;1

Mole of 705 g SO2 = 705/64 = 11.02 moles

Mole of 80 g O2 = 80/32 = 2.5 moles

O2 is limiting.

Mole ratio of O2 and SO3 = 1:2

Mole equivalent of SO3 = 2.5 x 2 = 5.0 moles

Mass of 5 moles SO3 = 5 x 80 = 400 grams

Percent yield = 400/586 = 68.3%

More on percent yield can be found here: https://brainly.com/question/17042787

#SPJ1

The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.

Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.

Mathematically,

Molarity= number of moles of solute/volume of solution in litre (1)

Where,

moles= given weight /by molecular weight

         = w/241.8

Substituting values in equation 1

0.500= (w/241.8)/(20.0 /1000)

w=0.80g

Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.

Learn more about Molarity, here:

https://brainly.com/question/16727614

#SPJ2

Answer:

A large absorption at 2950 cm⁻¹ indicates that there is likely an sp³C-H functional group somewhere in the molecule. The "sp³" designation means that this is a single bond because these atoms have 4 orbitals available (s + p + p + p) for hybridizing, meaning only single bonds are possible.

For a system PCl3(g) + Cl2(g) PCl5(g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C, the ratio of the partial pressure of PCl5 to the partial pressure of PCl3 is will increase

Generally, the equation for chemiecal reaction is mathematically given as

PC3 (g) + C₁₁₂ (g) = PC15 (g) 3

Assuming the addition of some Cl2 gas. The reaction will shift to the right at the invariant volume temperature, maintaining equilibrium. This results in a rise in P9Cl5(g) and a fall in PpCl3(g).

PpCl (g) /PpCl (g) will increase

Read more about Chemical Reaction

https://brainly.com/question/11231920

#SPJ1

The ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increase for a system PCl₃ (g) + Cl₂ (g) --> PCl₅ (g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C when some Cl₂ (g) is added at constant volume and temperature.

Generally, the equation for chemical reaction is mathematically given as ;

PCl₃ (g) + Cl₂ (g) --> PCl₅ (g)

Assuming the addition of some Cl₂ gas,

The reaction will shift to the right at the constant volume and temperature, maintaining equilibrium.

This results in a rise in PCl₅ (g) and a fall in PCl₃(g).

Hence, the ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increases

Read more about Chemical Reaction here;

brainly.com/question/11231920

#SPJ1

Explanation:

I) carbon dioxide

ii) nitrogen dioxide

iii) nitric acid

iv) sulphric acid

v) Potassium dichromate

vi) hexacyanoferrate (III) ion( not sure)

The molecular weight of Cr3(AsO4)2 is 433.827.

Furthermore, the primary distinction between each is that molar mass gives the mass of a mole of a selected substance. While molecular weight is the mass of a molecule of a particular substance. At an equal time as the definition and devices are splendid for molar mass and molecular weight, the value is the same.

The sum of the atomic hundreds of all atoms in a molecule is based totally on a scale wherein the atomic loads of hydrogen, carbon, nitrogen, and oxygen are 1, 12, 14, and 16, respectively.

Learn more about molecular weight here https://brainly.com/question/26388921

#SPJ10

Answer:

Large-scale insulin could be produced in relatively lesser time.

Explanation:

We already sort of do this where we infect the bacteria with a plasmid containing our insulin gene and it causes them to produce insulin. Since the question is saying that we edited their DNA directly, now these bacteria don't need to be infected with plasmid b/c now they can just pass these genes onto their offspring.

This will allow us to make TONS of insulin cuz bacteria are crazy good at making stuff and growing.

Answer:

In ionic bond one element should be metal and next should be non metal. in covalent both element should be met Alice. if there valence electron is less than 4 than it is metal or more than 4 it is non metal.

Answer:

Molecular compounds are inorganic compounds that take the form of discrete molecules. Examples include such familiar substances as water (H2O) and carbon dioxide (CO2). These compounds are very different from ionic compounds like sodium chloride (NaCl).

Answer:

which is an example of analog device

Due to the reaction's slow process of producing ppt or a change in color.

Chemical reaction is defined as a procedure where one or more compounds, known as reactants, are changed into one or more new substances, known as products. Chemical reactions result in the formation of new chemical bonds between the atoms of the reactant molecules and the product particles' atoms. While there are the same number of atoms both before and after the chemical transition, there will be a change in the number of molecules.

When carbon dioxide and water combine, carbonic acid is created. The indicator changes color as a result of the water becoming slightly acidic due to carbon dioxide gas from exhaled breath. Dissolution causes a change in pressure. This suggests a physical alteration.

Thus, due to the reaction's slow process of producing ppt or a change in color.

To learn more about chemical reaction, refer to the link below:

https://brainly.com/question/29039149

#SPJ2

Answer:

2 Fe(HCO₃)₃ + 3 CaO ---> 1 Fe₂O₃ + 3 Ca(HCO₃)₂

Explanation:

The unbalanced equation:

Fe(HCO₃)₃ + CaO ---> Fe₂O₃ + Ca(HCO₃)₂

Reactants: 1 iron, 3 hydrogen, 3 carbon, 10 oxygen, 1 calcium

Products: 2 iron, 2 hydrogen, 2 carbon, 9 oxygen, 1 calcium

As you can see, the reaction is clearly unbalanced because the number of each element on both sides is different. The best way to go about balancing an equation is by trying to first balance an element located in only one molecule on either side. For example, I started trying to balance  iron. After balancing iron, I looked to balance other elements that would have been affected by the new coefficient (i.e., hydrogen, carbon).

The balanced equation:

2 Fe(HCO₃)₃ + 3 CaO ---> 1 Fe₂O₃ + 3 Ca(HCO₃)₂

Reactants: 2 iron, 6 hydrogen, 6 carbon, 21 oxygen, 3 calcium

Products: 2 iron, 6 hydrogen, 6 carbon, 21 oxygen, 3 calcium

Now, with these coefficients, the quantity of each element on both sides is the same.

Answer:

Hint for Naming XeCl4

We have two non-metals so this is a molecular (sometimes called covalent) compound.

Answer:

[Na]^+ [Cl]^-

Explanation:

Lets say its sodium, its number of electrons is 11, but when its stable (an ion), it is 10. and chloride, number of electrons is 17, but when its stable (an ion) it is 18. So the lewis structure for that is, remember with the straight brackets (not sure what it's called, but you know what I mean I guess) its this one: [ ]

Sodium will be + because it has more protons (11-10 = +1), and chloride will be - because it gained an electron, so has more electrons than protons (17-18 = -1)

So the lewis structure would be:

[Na]^+  for sodium

and

[Cl]^- for chlorine

Sodium chloride:

[Na]^+ [Cl]^-

Also just to add, only 1 of each atom (Na and Cl) was needed for the bonding, but if let's say example; 2 Cl was needed to bond with sodium, there would be 2 Cl (same) and 1 Na.

Answer:

=7.89013× 10^47 moles of zinc

Explanation:

1 atom contains 6.023×10^23 moles.

1.31×10^24 atoms of zinc contain6.023×10^24×1.31×10^.24

Answer:

A. Element

B. Compound

C. Compound

D. Element

E. Compound

F. Compound

Explanation:

Elements are what is already on the periodic table and compounds are the substances created when they are combined.

Answer:

It appears all of them are correct
Smaller drops will scatter around while maintaining their shape
Larger drop will spread stick to the surface.
and drops close together will join to form on gigantic sphere(but not perfect sphere)
and if they are in the sun, they'll eventually evaporate

Explanation:

Answer:

B

Explanation:

I took the test

Answer:

162 g Fe₂O₃

Explanation:

To find the mass of Fe₂O₃, you need to (1) convert grams C to moles C (via molar mass from periodic table), then (2) convert moles C to moles Fe₂O₃ (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles Fe₂O₃ to grams (via molar mass). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units. The final answer should have 3 sig figs to reflect the given value.

Molar Mass (C): 12.011 g/mol

2 Fe₂O₃(s) + 3 C(s) ---> 4 Fe(s) + 3 CO₂(g)

Molar Mass (Fe₂O₃): 2(55.845 g/mol) + 3(15.998 g/mol)

Molar Mass (Fe₂O₃): 159.684 g/mol

18.3 g C           1 mole            2 moles Fe₂O₃          159.684 g
--------------  x  ----------------  x  -------------------------  x  -----------------  = 162 g Fe₂O₃
                        12.011 g              3 moles C                 1 mole

S=2, p=6, d=10, and f=14 the maximum number of electrons it can

accommodate.

The probability of finding an electron around the nucleus.

The principal number (n), is the number of the shell, it goes from 1 to 7 and is represented by the letter K, L, M, N, O, P, Q. The maximum number of electrons in the shells are, K = 2, L = 8, M = 18, N = 32, O = 32, P = 18, Q =8.

The secondary number (l) is the subshells, and it goes from 0 to 4 and is represented, in order, for the letter, s, p, d, f. The maximum number of electrons permitted in each subshell is s = 2, p = 6, d = 10, f = 14.

The magnetic number (ml), is represented by orbitals, and it goes from -l to +l, passing by 0. The maximum number of electrons is 2 for each one.

The spin number (ms) refers to the rotation of the electron, and it can be +1/2 or -1/2.

Hence, S=2, p=6, d=10, and f=14 the maximum number of electrons it can

accommodate.

Learn more about the orbitals here:

https://brainly.com/question/18914648

#SPJ1

Answer:

3.82 x 10²¹ molecules As₂O₃

Explanation:

To find the amount of molecules arsenic (III) oxide (As₂O₃), you need to (1) convert kg to lbs, then (2) convert g As₂O₃ to moles As₂O₃ (via molar mass), and then (3) convert moles to molecules (via Avogadro's number).

1 kilogram = 2.2 lb

Molar Mass (As₂O₃): 2(74.992 g/mol) + 3(15.998 g/mol)

Molar Mass (As₂O₃): 197.978 g/mol

Avogadro's Number:

6.022 x 10²³ molecules = 1 mole

0.0146 g As₂O₃            1 kg                  189 lb
------------------------  x  ---------------  x  ------------------  x   ................
         1 kg                     2.2 lb          

       1 mole                6.022 x 10²³ molecules
x  ------------------  x  ---------------------------------------  = 3.82 x 10²¹ molecules As₂O₃
      197.978 g                        1 mole

Answer:

5.96 * 10^23 molecules

Explanation:

Don't start counting up the number of CsHsNs and Os there are Counting up the atom ions will get a wrong answer.  The question is asking for the number of molecules. That means you do not break down each molecule to  find the number of molecules. You modify 1 mol to find out how many molecules are in 0.99 mols. Do that using a proportion.

1 mol contains 6.01 * 10^23 molecules

0.99 mol contains x

1/0.99 = 6.02 * 10^23 / x molecules

x = 0.99 * 6.02 * 10^23

x = 5.96 * 10^23

If data from a clinical trial contains personal information about a study participant, De-identification process should be used to separate identifying information from health information. Thus, Option (A) is correct

De-identification is a process of detecting identifiers (e.g., personal names and social security numbers) that directly or indirectly point to a person (or entity) and deleting those identifiers from the data.

De-identification and anonymization are strategies that are used to remove patient identifiers in electronic health record (EHR) data.

Hence, De-identification process should be used to separate identifying information from health information. Thus, Option (A) is correct.

learn More about health record here ;

https://brainly.com/question/11156017

#SPJ1

Answer:

the cytoplasm

protein 3b more commonly called vpg

Answer:

Make life easy for your customers and they are more likely to come back and buy again.

Explanation:

For example, you have to hire the right talent. You don't want somebody on the job that doesn't know how to do anything.