Answer:
The following are true of navigation lights on power-driven vessels:
They must be displayed from sunset to sunrise, or during times of reduced visibility.
They must be visible from a distance of at least two miles away.
They must be placed in a way that they are not obscured by other objects on the vessel.
They must be in good working order.
The specific requirements for navigation lights vary depending on the size and type of vessel. For more information, please consult the International Regulations for Preventing Collisions at Sea (COLREGs).
Explanation:
Which of the following changes helped General electric improve product delivery from its circuit-breaker division?
A. developing individualized custom-designed products.
B. Introducing a more streamlined management system.
C. Consolidating manufacturing areas.
D. Instituting an automated design system
Answer:
The answer is D. Instituting an automated design system.
General Electric's circuit-breaker division was able to improve product delivery by instituting an automated design system. This system allowed engineers to design and test new products more quickly and efficiently. As a result, the division was able to bring new products to market faster and meet customer demand more effectively.
The other options are not correct because they do not directly address the issue of product delivery. Developing individualized custom-designed products may increase customer satisfaction, but it will not necessarily improve product delivery. Introducing a more streamlined management system may improve efficiency, but it will not necessarily improve product delivery. Consolidating manufacturing areas may reduce costs, but it will not necessarily improve product delivery.
Explanation:
Conventional high-speed Ethernet networks operating over fiber are which of the following?
a. Of limited use in modern LANs
b. Called optical Ethernet
c. Being replaced by SONET
d. Being replaced by ATM
Conventional high-speed Ethernet networks operating over fiber are referred to as optical Ethernet (option b).
Conventional high-speed Ethernet networks operating over fiber are not limited in use in modern LANs. In fact, they are still widely used due to their high bandwidth capabilities and cost-effectiveness. However, they are not called optical Ethernet, which is a specific type of Ethernet that operates over optical fibers. They are also not being replaced by SONET or ATM, as these are different technologies that serve different purposes. SONET is used for synchronous data transmission over fiber-optic networks, while ATM is used for high-speed data transfer and multimedia applications. In conclusion, conventional high-speed Ethernet networks operating over fiber remain a popular and viable option for modern LANs and are not being replaced by other technologies.
To know more about Ethernet visit:
brainly.com/question/31610521
#SPJ11
the coolest place in a steam sterilizer is
The coolest place in a steam sterilizer is usually at the bottom of the chamber.
During a steam sterilization cycle, the heat source is typically located at the top of the chamber, which causes the steam to initially flow upward. As the steam condenses and loses heat, it begins to sink and circulate throughout the chamber. This creates a temperature gradient with the hottest temperatures at the top and the coolest temperatures at the bottom. In addition, any cool air that is present in the chamber will also sink to the bottom. Therefore, it is important to ensure that items being sterilized are properly loaded and positioned to ensure adequate steam and heat penetration throughout the entire load.
Learn more about condenses here: brainly.com/question/32139648
#SPJ11
Prior to starting an engine, you should check the turn and slip indicator to determine if the
A. needle indication properly corresponds to the angle of the wings or rotors with the horizon
B. needle is approximately centered and the tube is full of liquid
C. ball will move freely from one end of the tube to the other when the aircraft is rocked
The correct answer is A, "needle indication properly corresponds to the angle of the wings or rotors with the horizon."
The turn and slip indicator is an instrument in an aircraft that shows the rate of turn and the coordination of turns. It has a needle that moves to the left or right to indicate the rate of turn, and a small ball in a curved glass tube that moves to the left or right to indicate the coordination of the turn.
Before starting an engine, it is important to check the turn and slip indicator to ensure that the needle indication properly corresponds to the angle of the wings or rotors with the horizon. This is because the indicator works based on a gyroscope that detects the aircraft's rate of turn and its position relative to the horizon.
If the instrument is not properly calibrated or if there is a malfunction, it can lead to incorrect readings and potentially dangerous flying conditions. Therefore, it is essential to check the turn and slip indicator as part of the pre-flight checklist to ensure that the instrument is working properly and that the aircraft is safe to fly.
To learn more about turn and slip indicator, click here: brainly.com/question/30773859
#SPJ11
Which of the following are rule(s) of the Biba Integrity model? Select all that apply.
Select one or more:
a. Users at a higher level of integrity may not read information at a lower level of integrity
b. Users at a higher level of integrity may not write information at a lower level of integrity
c. Users at a lower level of integrity may not read information at a higher level of integrity
d. Users at a lower level of integrity may not write information to a higher level of integrity
a. Users at a higher level of integrity may not read information at a lower level of integrity
d. Users at a lower level of integrity may not write information to a higher level of integrity
The Biba Integrity model is a formal model for computer security that addresses the integrity of data. It consists of two rules:
a. The *integrity no-read-up rule, which states that a subject (user or process) at a higher integrity level may not read data at a lower integrity level.
b. The *integrity no-write-down rule, which states that a subject at a lower integrity level may not write data to a higher integrity level.
These rules are designed to prevent unauthorized modifications of data and ensure that data is only accessed by authorized users or processes. The Biba Integrity model complements the Bell-LaPadula Confidentiality model, which focuses on confidentiality rather than integrity.
Learn more about Biba Integrity here:
brainly.com/question/32076386
#SPJ11
The maximum time allowed for the Sprint planning for a 2 week Sprint is_________.
The maximum time allowed for the Sprint planning for a 2 week Sprint can vary depending on the size and complexity of the project. However, the general recommendation is that the Sprint planning should not take more than 8 hours for a 2 week Sprint.
This allows the Scrum team to adequately plan and prioritize the work that needs to be done during the Sprint.During the Sprint planning, the Product Owner and the Development team work together to define the Sprint goal and identify the work that needs to be completed during the Sprint. The Product Owner presents the highest priority items from the product backlog and the Development team estimates the effort required to complete each item. Based on these estimates, the Development team commits to completing a certain amount of work during the Sprint.The time-box for the Sprint planning is typically set at 8 hours for a 2 week Sprint, but it is important to note that this time can be adjusted based on the needs of the team. If the team needs more time to adequately plan and prioritize the work, they can request additional time from the Scrum Master. However, it is important to ensure that the time-box is not extended excessively as it can lead to delays in the project and impact the team's ability to deliver the work within the Sprint.
To know more about Sprint visit:
brainly.com/question/14582692
#SPJ11
If an item in the Sprint Backlog cannot be finished by the end of the Sprint (it turned out there is a lot more work to do than was estimated), the Sprint is cancelled...
If an item in the Sprint Backlog cannot be finished by the end of the Sprint, it is not necessarily the case that the entire Sprint must be cancelled. The purpose of the Sprint is to deliver a potentially shippable product increment, and while unfinished work can impact this goal, it does not automatically mean the Sprint must be abandoned.
The first step would be for the Development Team to assess the situation and determine the best course of action. If the unfinished work is critical to the Sprint goal and cannot be completed in a reasonable timeframe, then cancelling the Sprint and starting a new one may be the best option. However, if the unfinished work is not essential to the Sprint goal, the Development Team can choose to remove it from the Sprint Backlog and continue working on the other items.
It is important for the Development Team to communicate effectively with the Product Owner and stakeholders to ensure everyone is aware of the impact on the Sprint goal and any necessary adjustments to the product backlog. The Scrum Master should facilitate this communication and help the team to continuously improve their estimation and planning processes to avoid similar situations in the future.
To know more about Sprint Backlog visit:
https://brainly.com/question/31715638
#SPJ11
a(n) ________ is a set of symbols that the sender transmits.
A(n) message is a set of symbols that the sender transmits. A message can be verbal or nonverbal, and it can be transmitted through various communication channels, such as face-to-face interaction, email, text message, or phone call.
The symbols in a message can include words, tone of voice, body language, facial expressions, images, and other visual aids. The sender encodes the message in a way that is intended to convey a specific meaning to the receiver. However, the receiver may decode the message differently based on their own experiences, attitudes, and biases.
Therefore, effective communication requires not only clear encoding but also accurate decoding and feedback. Miscommunication can occur when the sender and receiver have different assumptions or expectations about the meaning of the symbols used in the message. Effective communication involves being aware of these potential barriers and using strategies to overcome them.
To know more about sender transmits visit:
https://brainly.com/question/30020581
#SPJ11
.What two things must you do to a Windows Server to convert it to a domain controller?
a. Active Directory database
b. Install Active Directory Domain Services (AD DS).
c. writable domain controller
d. Execute dcpromo from Server Manager.
To convert a Windows Server into a domain controller, there are two things that must be done. First, you need to install Active Directory Domain Services (AD DS). correct option is d (Active Directory Domain Services)
This can be done through Server Manager by selecting the option to add a role or feature and choosing Active Directory Domain Services (AD DS) from the list of available options. Once the installation is complete, you will need to configure the Active Directory database. This is the second thing that must be done. To do this, you need to execute the dcpromo command from Server Manager.
This will launch the Active Directory Domain Services Installation Wizard, which will guide you through the process of creating a writable domain controller. During the process, you will need to choose the appropriate options for your organization, such as the domain name, the administrator password, and the DNS configuration.
Once the wizard is complete, your Windows Server will be converted into a domain controller that can be used to manage your organization's network and security settings.
To know more about Windows Server visit:
https://brainly.com/question/9473585
#SPJ11
What does the word "development" mean in the context of Scrum? Select the best option?
In the context of Scrum, the word "development" refers to the process of creating or enhancing a product or service. It encompasses the entire software development process, from planning and design to coding, testing, and deployment.
This includes all the activities involved in building the product or service, such as writing code, creating user interfaces, testing functionality, and fixing bugs. The development process is iterative and collaborative, with the team working together to continuously improve the product or service.
The focus is on delivering a working product or service that meets the customer's needs, rather than on completing all the tasks in a linear fashion. The Scrum framework emphasizes the importance of regular feedback and communication between the development team and the stakeholders, which helps to ensure that the product or service is developed in a way that meets the customer's requirements.
To know more about software development process visit:
https://brainly.com/question/20369682
#SPJ11
which of the following is not a common material used in a lintel in a cmu wall?
Wood is not a common material used in a lintel in a CMU (concrete masonry unit) wall. Steel and reinforced concrete are the two most commonly used materials for lintels in CMU walls.
A lintel is a horizontal support structure that spans an opening in a wall, such as a window or door. In a CMU wall, the lintel is typically made of a strong, durable material that can support the weight of the wall above the opening. Steel and reinforced concrete are the two most commonly used materials for lintels in CMU walls due to their strength and durability.
While wood can be used in some types of lintels, it is not a common material for use in a CMU wall. This is because wood is not as strong as steel or reinforced concrete, and is more susceptible to decay or damage from moisture or pests. Additionally, wood may not be able to support the weight of the wall above the opening as effectively as steel or reinforced concrete. Therefore, steel and reinforced concrete are preferred materials for lintels in CMU walls.
Learn more about CMU here: brainly.com/question/32141530
#SPJ11
