Explanation:
a toothpick
A girl is out jogging at 2.00 m/s and accelerates at 1.50 m/s^2 until she reaches a velocity of 5.00 m/s. How far does she get?
Answer:
7.00 m
Explanation:
Given:
v₀ = 2.00 m/s
v = 5.00 m/s
a = 1.50 m/s²
Find: Δx
v² = v₀² + 2aΔx
(5.00 m/s)² = (2.00 m/s)² + 2(1.50 m/s²)Δx
Δx = 7.00 m
The throwback PFD is which type?
Answer:a
Explanation:
The throwback PFD is a Type III PFD. This type of PFD is designed for calm, inland water, or where there is a good chance of quick rescue. THe correct option is C.
Type III PFDs will not turn unconscious wearers to a face-up position, so the wearer may have to tilt their head back to avoid turning face down.
Type III PFDs have the same minimum buoyancy as Type II PFD. Float coats, fishing vests, and vests designed for various water sports are examples of Type III PFDs. Some Type III PFDs are designed to be inflated upon entering the water.
Offshore life jackets of Type I are suited for all areas, notably open, choppy, or isolated regions where rescue may be delayed and offer the highest buoyancy. Near-shore vests of Type II PFDs are designed for calm inland water or situations where there is a good probability of prompt rescue. Throwable PFDs of Type IV are suitable for usage in open water as well as calm, heavily used inland waters where assistance is always available. Special-purpose PFDs known as Type Vs are made for activities like kayaking and whitewater rafting.
The throwback PFD is not a Type I PFD because it does not provide the most buoyancy and is not designed for all waters. It is not a Type II PFD because it is not intended for calm, inland water or where there is a good chance of quick rescue. It is not a Type IV PFD because it is not intended for calm, inland water with heavy boat traffic, where help is always present. It is not a Type V PFD because it is not designed for specific activities such as kayaking or whitewater rafting.
Therefore, the correct option is C. type III.
To learn more about PFDS click:
https://brainly.com/question/30098150
#SPJ6
A wooden object (conically shaped) has a diameter of 8cm and height of 14cm. It floats in oil with 6cm of its height above oil level. Determine (a)The density of the object (b) If the volume of oil is twice that of the object, what fraction of oil is displaced after immersing the object?
Answer:
(a) The density of the object is 316/343 × the density of the oil
(b) The fraction of oil displaced after immersing the object is 0.461 of the oil volume
Explanation:
(a) The volume, V of a cone of height, h and base diameter, D = 2×r is given by the following equation;
[tex]V = \dfrac{\pi r^{2} h}{3}[/tex]
The volume of the object is therefore;
[tex]\dfrac{\pi \times 4^{2} \times 14}{3} = 74\tfrac{2}{3}\pi \, cm^3[/tex]
Where 6 cm is above the oil level we have;
[tex]\dfrac{\pi \times \left (6 \times \dfrac{4}{14} \right )^{2} \times 6}{3} = 5\tfrac{43}{49}\pi \, cm^3[/tex] above the oil level
Therefore, volume of the oil displaced = [tex]68\tfrac{116}{147}\pi[/tex] cm³ = 216.11 cm³
The density of the object is thus;
[tex]\dfrac{68\tfrac{116}{147}\pi}{ 74\tfrac{2}{3}\pi} \times Density \ of \ the \ oil = \dfrac{316}{343} \right ) \times Density \ of \ the \ oil[/tex]
The density of the object = 316/343 × the density of the oil.
(b) The volume of the oil = 2 × Volume of the object = [tex]2 \times 74\tfrac{2}{3}\pi \, cm^3 = 149\tfrac{1}{3}\pi \, cm^3[/tex]
The fraction of the volume displaced, x, after immersing the object is given as follows;
[tex]x = \dfrac{68\tfrac{116}{147}\pi}{ 149\tfrac{1}{3}\pi} = \dfrac{158}{343} = 0.461[/tex]
The fraction of oil displaced after immersing the object = 0.461 of the volume of the oil
Does anyone know how to do this question???
Force = 7kN
Pressure = 1mPa
Area = ?
Answer:
7000 m^2
Explanation:
Pressure=Force/Area
1=7000/Area
1(Area)=7000
Area=7000 m^2
Question 2 (2 points)
Practice tests are available online.
True
False
K12
As a charged object approaches a neutral object the objects.......
attract
spin
repel
no interaction
Answer:
attract is the answer.
Answer:
It attracts
Explanation:
It attracts the object
What does the law of conservation of energy state about both sides of the chemical reaction
Answer: D
Explanation: Energy is neither created nor destroyed so the amount of reactants and products must be equal
A truck accelerated from a velocity of 20 m/s to velocity of 5 m/s in a period of 5 seconds. Determine the acceleration of the truck with the proper units.
A. 2 meters/ second
B. -3 meters/ second
C. 3 meters/ second squared
D. -3 meters/ second squared
If you wanted to learn more about ancient scientific knowledge, whose life
would you research?
Answer:
I would like to research Nikola Tesla's life
Why can a liquid take the shape of the bottom of its container?
Answer:
Liquids take on the shape of their container because they contain particles that can slide past each other. Particles in a solid,
Explanation:
Answer: Liquids take on the shape of their container because they contain particles that can slide past each other.
Two bumper cars collide and then move away from each other. The forces exerted are:
A. Equal and opposite
B. Opposite
C. Equal
Answer:
the answer is b
Explanation:
if it was equal they would move away from each other
Question 5(Multiple Choice Worth 4 points) (01.04 MC) Which of the following correctly describes the relationship between speed and velocity? Speed is the change in velocity over time; velocity is distance plus direction. Speed is the change in distance over time; velocity is speed plus direction. Speed is distance plus direction; velocity is speed plus time. Speed is the change in acceleration; velocity is distance over time.
Answer:
Speed is the change in distance over time; velocity is speed plus directionExplanation:
Speed is defined as the change in distance covered by a body with respect to time while velocity the change in displacement of a body with respect to time. Speed is a scalar quantity since it does not specifies direction while velocity is a vector quantity because it specifies both magnitude and direction.
Speed can only be equal to the velocity if it also specifies direction.
Based on the definition above, it can be concluded that speed is the change in distance over time and velocity is speed plus direction.
Answer:
Speed is the change in distance over time; velocity is speed plus direction.
Explanation:
I did it and got the test right
Hannah knows she has some natural skill at field hockey, but she never practices in the off season. This is an example of
Answer:
wasting talent
Explanation:
10. Almost three-quarters of household energy use is due to the following:
• home furnaces and air conditioners
• water heaters
• washers and dryers
• lighting
For each of these uses of energy, give two reasonable ways to reduce household
energy consumption
Answer: Energy consumption and sustainability is important so that it remain available for future generation.
Explanation:
1. The home furnaces are likely to require fuel like coal, which will directly emit carbon dioxide and carbon monoxide gases. These should be replaced with the electrical furnaces. The old or more power consuming air conditioners should be replaced with new ones.
2. The water heaters should be tankless so their capacity to heat more water could be possible. The water heaters should be electricity saving.
3. Washer and dryers should be water savy and electricity savy. A front-loading washing machine is useful energy saver.
4. The LED lights are more electricity saving than conventional bulbs. Halogen lights are also electricity saving.
If the box moves at a constant velocity, what do you know about the forces acting on the object?
A)The forces are balanced.
B)The forces are unbalanced.
C)The forces are in outerspace
D)The box has friction
1. What is the inductance of a series RL circuit in which R= 1.0 K ohm if the current increases to one-third of
its final value in 30 micro s?
Answer: the answer is C its in the book
Explanation:
M
An object has a mass of 5.52 g and a volume of 12 mL. What is the density of the object
Answer:
0.46 g/mL
Explanation:
Density can be found using the following formula.
[tex]d=\frac{m}{v}[/tex]
where d is density, m is mass, and v is volume.
We know that the object has a mass of 5.52 grams and a volume of 12 milliliters.
m=5.52 g
v=12 mL
Substitute these values into the formula.
[tex]d=\frac{5.52 g}{12 mL}[/tex]
Divide 5.52 by 12
5.52/12=0.46
d=0.46 g/mL
The density of the object is 0.46 g/mL, and option C is correct.
ILL MARK YOU THR BRAINLIEST SOMEONE PLS HELP ITS URGENT.
The acceleration of a skydiver of mass 80 kg changes from 9.8 m/s ^ 2 to 5.8 m/s ^ 2 as he falls through the air. What is the air resistance experienced by him?
Answer:
320N
Explanation:
Net force =w- AR
AR=w -force
AR=mg- ma
AR=80*9.8- 80*5.8
AR=784- 464
AR=320N
:What will be the value of the refractive index of the medium? Critical angle of that medium is 30 degree
a) 2
b) 1.5
c) 1.8
d) 1
Answer:
Let the second medium be air (n₁=1)
The refractive index n₂ of the medium where first medium is air is found (a)
(a) n₂ = 2
Explanation:
Critical angle can be defined as the angle of incidence that provides the angle of refraction of 90°.
Refractive index of a medium can be defined as a number that describes that how fast a light will travel through that medium.
Critical angle and Refractive index are related by:
[tex]\theta_{critical}= sin^{-1}(\frac{n_1}{n_2})[/tex]
[tex]sin \theta_{critical}=\frac{n_1}{n_2}[/tex]
To find refractive index of medium with respect to air, substitute n₁=1 (Refractive index of air is 1)
Also θ(critical)=30°
Find n₂ :
[tex]sin30= \frac{1}{n_2}\\0.5=\frac{1}{n_2}\\n_2=\frac{1}{0.5}\\n_2=2[/tex]
Suppose you roll a bowling ball (m1)down the alley, and the ball strikes the pin (m2) sending it flying. The mass of the bowling ball is greater than the mass of the
pin. Predict the magnitude of the forces between the two objects during the collision
A)The bowling ballexerts a larger force on the pin because it was moving at
a high speed,
B)The pin exerts a larger force on the bowling ball
C)The bowing ball exerts a larger force on the bin because it is more massive
D)Both objects blert the same magnitude of force on each other due to Newtonsard Law
Answer:
The correct option is;
D) Both objects exert the same magnitude of force on each other due to Newton's 3rd law
Explanation:
Newton's third law of motion states that for every action there is an equal and opposite reaction
Since the bowling ball is rolled down the alley while the pin is displaced at such a speed that it flew, we have that the velocity of the rolling ball, v₁ is less than the velocity of the flying pin v₂
Therefore, whereby force = Rate of change of momentum produced we have;
The change of momentum of the ball = m₁×(v₁ - v₁ₐ)
The change of momentum of the pin = m₂×(0 - v₂)
Hence since the pin change in movement (flight) was more suddenly than the slowing down of the ball, the action of the rolling ball is equal to the reaction of the flying pin.
The diagram shows a motion map
Which best describes the motion of the object between 1
and 4 seconds
toata
• The object has decreasing acceleration and increasing
velocity
The object has positive acceleration and eventually
stops
The object has decreasing acceleration and decreasing
velocity
The object has negative acceleration and eventually
stops
Answer:
the object has decreasing acceleration and increasing velocity
I'M ON A TIMER Ingrid says that a red ball of clay appears red because the clay reflects red wavelengths. Simon says that the clay appears red because it allows red wavelengths to pass through it. Which statement best explains who is correct? Ingrid is correct. The clay appears red because it is opaque. Ingrid is correct. The clay appears red because it is a type of matter. Simon is correct. The clay appears red because it is opaque. Simon is correct. The clay appears red because it is a type of matter.
Answer:
Ingrid is correct. The clay appears red because it is a type of matter.
Explanation:
Explanation: It is A because it only shows red because it only reflects red. If it let any other color pass through it then it could reflect any color.
A piston has an area of 4 m2 and needs 20 N of force to push it down. What is the pressure?P=F/A *
A) 5 Pa
B) 0.2 Pa
C) 80 Pa
D) 20 Pa
brainliest for the best answer!
for besties with scienceeee!! asap plzz
The mass of Mars is 6.42 × 1023 kg. Its moon Phobos is 9378 kilometers away from Mars and has a mass of 1.06 × 1016 kg. What is the gravitational force between Mars and Phobos? 5.16 × 1015 N 5.16 × 1021 N 4.84 × 1022 N 4.84 × 1025 N
Answer:
A on Edge 5.16 x 10^15 N
Explanation:
The gravitational force between Mars and Phobos is 5.16*10^15 N.
Using the formula
F = G m1 m2/ r^2
= 6.67*10^-11*6.42*10^23*1.06*10^16/(9378)^2
= 45.39*10^28/87946884
= 5.16 * 10^15 N
What is gravitational force ?"The force of attraction on a body by earth is called gravitational force." Example : The leaves and fruits fall from a tree downwards towards the ground, water in a river flows down streams, a ball thrown up goes to a height and then returns back on ground are some examples of motion due to gravitational force.
What is phobos ?"Phobos is the larger of Mars' two moons and is 17 x 14 x 11 miles (27 by 22 by 18 kilometers) in diameter. It orbits Mars three times a day, and is so close to the planet's surface that in some locations on Mars it cannot always be seen."
Know more about gravitational force here
https://brainly.com/question/24783651
#SPJ2
Which one of the following is not equivalent to 2.50 miles?
(1.00 mi = 1.61 km = 5280 ft, 1.00 yd = 3.00 ft = 12.0 in.)
(A) 1.32 x 104 ft
(B) 1.58 x 105 in
(C) 4.02 x 103 km
(D) 4.40 x 103 yd
(E) 4.02 x 105 cm
Answer:
Choice C is not equivalent to 2.50 miles.
Explanation:
The given data is now converted into feet, inches, kilometers, yards and centimeters:
mi - ft
[tex]x = (2.50\,mi)\cdot \left(5280\,\frac{ft}{mi} \right)[/tex]
[tex]x = 13200\,ft[/tex]
[tex]x = 1.320\times 10^{4}\,ft[/tex] (Choice A)
mi - in
[tex]x = (2.50\,mi)\cdot \left(5280\,\frac{ft}{mi} \right)\cdot \left(12\,\frac{in}{ft} \right)[/tex]
[tex]x = 158400\,in[/tex]
[tex]x = 1.584\times 10^{5}[/tex] (Choice B)
mi - km
[tex]x = (2.50\,mi)\cdot \left(1.61\,\frac{km}{mi} \right)[/tex]
[tex]x = 4.025\,km[/tex] (Different from Choice C)
mi - yd
[tex]x = (2.50\,mi)\cdot \left(5280\,\frac{ft}{mi}\right) \cdot \left(\frac{1}{3}\,\frac{yd}{ft} \right)[/tex]
[tex]x = 4400\,yd[/tex]
[tex]x = 4.40\times 10^{3}\,yd[/tex] (Choice D)
mi - cm
[tex]x = (2.50\,mi)\cdot \left(1.61\,\frac{km}{mi} \right)\cdot \left(100000\,\frac{cm}{km}\right)[/tex]
[tex]x = 402500\,cm[/tex]
[tex]x = 4.025\times 10^{5}\,cm[/tex] (Choice E)
Choice C is not equivalent to 2.50 miles.
Two students walk out on the broken bridge together. As they reach the end of the bridge, what would happen to their gravitational potential energy.
A)Decrease
B)increase
C)Remain the same
D)None of the above
Answer: C
Explanation: I dont realy know what this means. but it will not increase because your not getting closer to earths center of gravity and not decreasing because your not high enough in the atmosphere.
Help ASAP please (: The waves with the MOST energy have
amplitudes.
frequencies and
A) low; large
B) low; small
C) high; large
D) high; small
Answer: C
high; large
Explanation:
The wave energy is related to its amplitude and frequency.
The wave energy is proportional to the amplitude of the wave. So, wave with the most energy will have high amplitude.
Also, frequency is related to wave energy. The larger the frequency, the more the energy of the wave.
Therefore, The waves with the MOST energy have high amplitudes and large
frequencies.
Which of these correctly describes what would happen to a system if 100 J of heat energy is added to it?
1. The potential energy of the system will increase and this will increase the attraction between its particles.
2. The strength of the bonds in system will increase and this will decrease the speed of its particles.
3. The kinetic energy of the system will increase and this will increase the speed of its particles.
4. The kinetic energy of the system will decrease and this will decrease the speed of its particles.
The correct statement to describe that when a 100 J of heat energy is added to the system, then the kinetic energy of the system will increase and the speed of the particles will also increase. Hence, option 3 is correct.
What is Kinetic energy?The force that an object has because it is moving is known as kinetic energy in physics. It is defined as the quantity of effort required to accelerate anybody of a specific mass from rest to its specified velocity. The body keeps its kinetic energy after acquiring it during acceleration, barring changes in speed.
When slowing from its current pace to a condition of rest, the body expends the very same amount of energy. Any term in the Lagrangian of a system that has a derivative in regard to time is formally referred to as kinetic energy.
When the energy is added to the system the gap between the particles will increase due to which the velocity of the molecules will increase and with increase in the velocity the kinetic energy will also increase automatically.
To know more about Kinetic energy:
https://brainly.com/question/26472013
#SPJ5
I WILL CHOOSE YOU AS THE BRAINIEST PLEASE ANSWER MY QUESTION
Identify that all objects exert a force of gravity on all other objects in the universe
Answer:
It's like the Earth pulling on you and keeping you on the ground. That pull is gravity at work. Every object in the universe that has mass exerts a gravitational pull, or force, on every other mass. The size of the pull depends on the masses of the objects.
Explanation:
Ax = 44.4 m and Ay = 25.1 m Find the direction of the vector.
Answer: 29.5 degree
Explanation: Given that
Ax = 44.4 m and Ay = 25.1 m
The direction of the vector will be
Tan Ø = Ay/Ax
Substitute Ay and Ax into the formula
Tan Ø = 25.1/44.4
Tan Ø = 0.5653
Ø = tan^-1(0.5653153)
Ø = 29.48 degree
Ø = 29.5 degree approximately.
Therefore, the direction of the vector is 29.4 degrees approximately.
