The reaction for sodium, Na, that corresponds to the first ionization energy is as follows:
Na(g) → Na⁺(g) + e⁻
In many cases, this energy is expressed in kJ/mol.
The following reaction for chloride, Cl, corresponds to the first ionization energy:
Cl(g) + e⁻ →Cl(g)
What is ionization energy?The energy needed to eject an electron from a gaseous atom is referred to as the ionization energy. Ionization energy, sometimes referred to as ionization potential, is the amount of energy needed to remove an electron from an isolated atom or molecule in physics and chemistry.
Here,
For Sodium, Na, the reaction that corresponds to the first ionization energy is the following one:
Na(g) → Na⁺(g) + e⁻
This energy is frequently expressed in kJ/mol
For Chloride, Cl, the reaction that corresponds to the first ionization energy is the following one:
Cl(g) + e⁻ →Cl(g)
To know more about ionization energy,
https://brainly.com/question/28385102
#SPJ4
The major chemical structures of hormones include____ l a. polysaccharides, esters, and steroids. b. 2 points only molecules containing amine groups. c. steroids, amino acid derivatives, and esters. d. steroids, polypeptides, and anino acid derivatives. e. only steroids.
The major chemical structures of hormones include c. steroids, amino acid derivatives, and esters.
Steroids are a class of lipids that are characterized by a specific arrangement of four fused carbon rings. They include hormones such as estrogen, testosterone, and progesterone. Amino acid derivatives are hormones that are derived from amino acids, such as thyroxine, which is derived from the amino acid tyrosine.Esters are compounds formed from the reaction between an alcohol and a carboxylic acid, such as adrenaline, which is a catecholamine ester. Polysaccharides, polypeptides, and anino acid derivatives, are not the major chemical structures of hormones, although some hormones may have these as part of their structure.
Learn more about Steroids here:
https://brainly.com/question/29382368
#SPJ4
Take the element krypton. How might you expect its wavelength to change if it goes from traveling through Earth’s atmosphere to traveling through water in the ocean?
Light moves from a rare to a denser medium at a slower speed and shorter wavelength. As a result, when light enters water from the air, its wavelength is less in water than in air but its frequency remains the same.
What is the wavelength?The distance between two identical points (adjacent crests) in consecutive cycles of a waveform signal as it moves through space or over a wire is known as its wavelength.
In wireless systems, what do wavelength and frequency mean?The distance between two wave crests determines the wavelength, but a wave's trough has a constant wavelength. The term "frequency" refers to the number of vibrations that pass over a specific location in a second and is represented in cycles per second (Hz) (Hertz). We discuss how wavelength and frequency are related.
To know more about wavelength visit:
https://brainly.com/question/12924624
#SPJ4
a piece of titanium metal with a mass of 20.8g is heated in boiling water to 99.5 o c and then dropped into a coffee cup calorimeter containing 75.0g of water at 21.7 o c. when thermal equilibrium is reached, the final temperature is 24.3 o c. calculate the specific heat of titanium.
The the specific heat of titanium is 0.524 J g-1 °C-1.
What is specific heat, exactly?The amount of heat required to increase the temperature of 1 gram of a substance by 1 degree Celsius (°C) is known as specific heat. Since water has a higher specific heat than other substances, it requires more energy to raise its temperature.
q = m × C × ΔT
q = m × C × (T_f - T_i),
where:
q = amount of heat energy gained or lost by substance
m = mass of sample
C = specific heat capacity (J g-1 °C-1)
T_f = final temperature
T_i = initial temperature
The specific heat capacity of water is 4.20 J g-1 °C-1
2) Therefore:
q_lost by titanium = (20.8 g) × C_titanium × (24.3 - 99.5)°C
q_lost by titanium = -1564.16 × C_titanium
q_gained by water = (75.0 g) × (4.20 J g-1 °C-1) × (24.3 - 21.7)°C
q_gained by water = 819
-q_lost by titanium = q_gained by water
-(-1564.16 × C_titanium) = 819
C_titanium = (819) / (1564.16) = 0.5236 = 0.524
C_titanium = 0.524 J g-1 °C-1
To know more about specific heat visit:
https://brainly.com/question/27991746
#SPJ4
Which of the following compounds contains an ion wvith a +3 charge? la) NOa (b) Mn_Oa (c) BaCIO3 (d) FejPz le) all of them have +3 charge
The compound that contains an ion with a +3 charge is FejPz. So option D is correct.
FejPz is an Iron(III) Phosphide, and the Iron ion in it has a +3 charge. Iron can have multiple oxidation states and the +3 oxidation state is one of them.
NOa is Nitrite, Nitrite is a neutral compound and doesn't contain any ion with a +3 charge
Mn_Oa is Manganese (IV) oxide, and Manganese in it has a +4 charge.
BaCIO3 is Barium Carbonate which is a neutral compound as well and doesn't contain any ion with a +3 charge.
Therefore, the compound FejPz is the one containing an ion with a +3 charge.
To know more about chemical compounds:
https://brainly.com/question/26487468
#SPJ4
Complete this Lewis structure for S2O32− by adding lone pairs and formal charges.Add lone-pair electrons and formal charges to this structure.
Oxygen is more electronegative compared to Sulfur. So, negative charge can be accomodate by oxygen rather than sulfur.
What is electron example?The smallest element component of an atom, the electron has a negative charge. In a neutral atom, there are an equal amount of protons and electrons. One atom and one particle are all that the hydrogen atom has. But in the other hand, the uranium atom possesses 92 protons, which means 92 electrons.
What is electrons and protons?The electron, quark, and nucleo are the three subatomic particles that make up an atom. The core nucleus of the atom, which contains neutrons and protons, is what makes up an atom. Its electrons that surround the nucleus. Protons have a positive charge, revolutionaries have a negative surface charge, and neutrons are neutral.
To know more about Electrons visit:
https://brainly.com/question/25674345
#SPJ4
limestone contains the ionic compound calcium carbonate (caco3), which reacts with hcl to form the ionic compound calcium chloride, water, and carbon dioxide. (caco3 has a molar mass of 100 grams/mol) (calcium ion is ca 2 , chloride is cl-) a). write the balanced equation. (what is the new ionic compound?
The following chemical reaction occurs when hydrochloric acid and calcium carbonate come into contact: CaCO3 + 2HCl → CaCl + CO2 + H2O, providing acid neutralization as well as byproduct production. Carbon dioxide is the new ionic component as a result.
What is the use of calcium carbonate?Whenever the levels of calcium consumed through food alone is insufficient, calcium carbonate is used as a dietary supplement. The body needs calcium for strong bones, muscles, a healthy neurological system, and a healthy heart. In addition to being an antacid, calcium carbonate is used to treat stomach discomfort, heartburn, and acid indigestion.
What is calcium carbonate made of?The chemical compound calcium carbonate, with the formula CaCO3, is created when carbon, oxygen, & calcium come together. It is a common mineral found in rocks all over the world, most notably as limestone, and it is the main component of marine animal shells, snail shells, coal balls, pearls, or eggshells.
To know more about Calcium Carbonate visit:
https://brainly.com/question/14822891
#SPJ4
what is the mole fraction of oxygen in a gas mixture that is 37% oxygen and 63% nitrogen by volume?
a. 0.25
b. 0.37
c. 0.34
d. 0.52
In the gas mixture, oxygen makes up 0.37 moles. The ratio of molecules of one component in a mixture is known as a mole fraction.
In order to get the mole fraction of oxygen, divide the percentage by volume of oxygen by the percentage by volume of the gas mixture.
oxygen volume as a percentage = 37%, or 0.37.
37% oxygen and 63% nitrogen, expressed as a percentage of the total volume of the gas, = 1.
37% + 67% = 100% = 1
We know that the formula of mole fraction is taken as:
Mole fraction of solute = Number of Moles of Solute / Total number of moles of both the solutes and the solvent.
To learn more about mole fraction click here https://brainly.com/question/29808190
#SPJ4
the stock buffer solution contains 1.00 m na2co3 and 0.143 m nahco3. calculate the milliliters of stock buffer needed to prepare 500 ml of buffer containing 0.0125 m bicarbonate ion
Moles of bicarbonate ion in 500 mL of desired solution = (0.0125 mol/L) × (0.500 L) = 0.00625 mol
What is solution?A solution is a means of solving a problem or addressing an issue. It can range from a simple, practical solution to a complex scientific or technological solution. Solutions are often creative, and the best solutions often involve collaboration and the sharing of ideas and resources.
Moles of bicarbonate ion in 1 L of stock buffer solution = (1.00 mol/L Na2CO3) × (2 mol HCO3-/1 mol Na2CO3) + (0.143 mol/L NaHCO3) × (1 mol HCO3-/1 mol NaHCO3) = 2.286 mol/L
Moles of bicarbonate ion in 500 mL of stock buffer solution = (2.286 mol/L) × (0.500 L) = 1.143 mol
Moles of bicarbonate ion needed from stock buffer solution to make 500 mL of desired solution = 0.00625 mol
Milliliters of stock buffer solution needed = (0.00625 mol/1.143 mol) × (500 mL) = 54.2 mL
To learn more about solution
https://brainly.com/question/25326161
#SPJ4
what do we call the type of chemical reaction that occurs in this step? explain how the name of this type of reaction relates to a key resource other than food.
The chemical reaction is called hydrolysis, which is a type of catabolic reaction. "Hydro-" means that water is used and "-lysis" means to break down. Thus, hydrolysis is a process that uses water as a resource to break down ATP into ADP and phosphate..
Definition of Chemical ReactionA chemical reaction is a process in which one or more substances are changed into one or a different substance and produce new products. Substance is a chemical element or compound. Chemical reactions rearrange reactant atoms to make different substances.
Because of the many chemical reactions that occur around us, a form of chemical equation is created to make it easier for humans to express chemical reactions. A chemical equation is a mathematical statement that represents the formation of products from the reactants and also states the specific conditions under which the reaction occurs.
The reactants are on the left side, while the products formed are on the right side and are connected by arrows. For example, A+B➡️C+D
From the equation above, you can see that A and B are reactants that react and form products C and D. In actual chemical equations, reactants are denoted by their chemical formulas. Based on the conservation of mass, the chemical equation must be balanced, that is, the number of atoms on both sides must be the same.
Learn more about chemical reaction at https://brainly.com/question/11314881.
#SPJ4
Determine the electron geometry (eg) and molecular geometry (mg) of CO2−3
gekjahajhnashlms f,bnl mfsjhapoigag
The electron geometry (eg) of CO2-3 is trigonal planar. This is because the carbon atom has three other atoms bonded to it (two oxygen atoms and one negative charge), and the bonds of these three atoms form a triangle.
What is trigonal planar?Trigonal planar is a molecular geometry that is characterized by three atoms or groups of atoms that are all in the same plane and all bond angles are equal to 120 degrees.
The molecular geometry (mg) of CO2-3 is linear. This is because the three atoms are arranged in a straight line, with the negative charge located in the middle. The linear shape of the molecule is due to the repulsion of the negative charge between the two oxygen atoms, pushing them away from each other.
To learn more about trigonal planar
https://brainly.com/question/3387378
#SPJ4
sort the following chromium compounds by whether the cation is chromium(ii) or chromium(iii). Drag each item to the appropriate bin. View Available Hint(s) Reset Help Cris CrBry Cro CIN Cross CrsP Chromium(II) Chromium(111)
The order of chromium compounds based on their cations:
CrI₃ - Cr is + 3 (III)CrBr₂ - Cr is + 2(II)CrO = Cr is + 2(II)CrN - Cr is +3 (II)Cr₂S₃ - Cr is + 3 (III)Cr₃P₂ - Cr is +2 (II)Cations are ions that have a positive charge due to the retention of electrons to achieve a level of stability according to the duplet and octet rules. An anion is an ion that has a negative charge due to the binding or acceptance of electrons to achieve a level of stability according to the duplet and octet rules.
When viewed from the atoms/elements that compose them, Anions and Cations can be divided into 2, namely:
Monoatomic Anions and Cations, namely ions formed from only one element, for example, Ka+ cations or Cl- anions.Polyatomic Anions and Cations, namely ions formed from several elements or atoms. For example, SO42- anion or NH4+ cationChromium (3+) is a monoatomic trication and chromium cation.
Chromium (2+) is a monoatomic cation, a chromium cation, and a divalent metal cation.
complete question sees the picture.
Learn more about cations and anions at https://brainly.com/question/14309645
#SPJ4
Which statement describes mechanical energy?
A.the energy that is stored in chemical bonds
B.the energy that is associated with temperature
C.the sum of the kinetic energy and the potential energy of an object
D.the type of energy that is associated with electromagnetic radiation
Answer:
C.the sum of the kinetic energy and the potential energy of an object
Explanation:
This question can be viewed from two angles.
What is mechanical energy?Mechanical energy is defined as the energy of an object in motion or the energy that is stored in objects according to their position.
Mechanical energy can also be defined algebraically as:
[tex]Energy_{Mechanical} = U + K[/tex]
Where U is the potential energy. Where K is the kinetic energy.Answer BreakdownChoice C is the best answer because it covers both the equation for mechanical energy and the scientific definition. Kinetic energy is the energy of an object in motion while potential energy is the energy of a stationary object. When these energies are summed we can find the mechanical energy.Choice B is incorrect. The Energy associated with temperature is thermal energy. This energy can be endothermic or exothermic.Choice D is incorrect. The energy that is associated with electromagnetic radiation is based on the EM spectrum. Choice A is incorrect. The energy that is stored in chemical bonds is a type of potential energy but it is not mechanical. These bonds can be ionic, covalent, or metallic.Please let me know if this helped!!!
Which of the following geometries for the complex ion [Co(en)(H2O)4]2+ are possible?
Check all that apply
a. trigonal bipyramidal or square pyramidal
b. octahedral
c. linear
d. tetrahedral or square planar
e. trigonal planar
One of the probable morphologies for said complex ion [Co(en)(H2O)4]2+ is octahedral.
What are some instances of complicated ions?An ion that has one maybe more ligands connected to a core metal through a single bond connection is referred to as a complex ion. A ligand is a substance that may use its single electron pair to establish a dative covalent connection with a transition metal.
What is a complex ion made of?Lewis acid-base interaction causes a metal ion a ligand to combine to produce a complex ion. The ligand, which has one or more lone pairs, functions as a Lewis base, whereas the positively charged ion functions as a Lewis acid.
To know more about Complex ion visit:
https://brainly.com/question/24262383
#SPJ4
an aluminum aerosol can will burst if the pressure inside reaches 210.0 psi. if the can initially contains an ideal gas at 518.0 kpa at 298.15 k, at what temperature (in k) will the can burst?
Assuming the container initially contains an ideal gas at 518.0 kpa at 298.15 k, the aluminium aerosol can will rupture when the internal pressure reaches 210.0 psi, whereas it will burst at 822.50 K.
Pressure is the force applied per unit area over the force perpendicular to an object's surface (symbol: p or P). The pressure as it relates to the air pressure around it is referred to as the gauge pressure. There are several different units used to express pressure. The behaviour of multiple ideal gas under varied conditions is accurately approximated by the ideal gas law in thermodynamics. The Charle's Law, Boyle's Law, and T2 = (298.15*14.29)/5.18sT2 = 822.50K empirical laws are all combined in the Ideal Gas Equation.
Learn more about ideal gas here
https://brainly.com/question/28837405
#SPJ4
FILL IN THE BLANK 2. determine the number of maximum electrons that can fit in the outermost shell of that atom. Forget about how many valence electrons the atom has______ just think about how many total electrons fit in that shell
The maximum number of electrons that can fit in the outermost shell of an atom is 2 for s-block, 8 for p-block, 18 for d-block, and 32 for f-block elements.
The maximum number of electrons that can fit in the outermost shell of an atom is determined by the electron capacity of that shell, which is also known as the maximum number of electrons that can occupy a shell.
For the s-block elements, the maximum number of electrons that can fit in the outermost shell is 2.For the p-block elements, the maximum number of electrons that can fit in the outermost shell is 8.For the d-block elements, the maximum number of electrons that can fit in the outermost shell is 18.For the f-block elements, the maximum number of electrons that can fit in the outermost shell is 32.It is important to note that this information is based on the electronic structure of an atom and not on the number of valence electrons it has.
To learn more about electrons at
https://brainly.com/question/1255220?referrer=searchResults
#SPJ4
the pattern of ionization energies for element x can be best explained by which of the following cocnepts
Across the periodic table, the initial ionization energy fluctuates in a predictable manner. In groups, the ionization energy drops while rising from left to right during the course of a period.
What is the pattern for ionization energy?The first ionization energy varies in a predictable way across the periodic table. The ionization energy decreases from top to bottom in groups, and increases from left to right across a period. Thus, helium has the largest first ionization energy, while francium has one of the lowest.The ionisation energy measures an element's capacity to participate in chemical processes that call for the creation of ions or the donation of electrons. It is often connected to the type of chemical bonds that exist between the components in the compounds they form.The power needed, under ideal circumstances, to remove one electron from each of the atoms in one mole of gaseous atoms.Learn more about Ionization energy refer to :
https://brainly.com/question/20658080
#SPJ4
a sample of gas at a constant temperature has an initial pressure reading of 2.00 atm with a volume of 175.0 ml. after a change in pressure, the final volume reading is 550.0 ml. calculate the final pressure.
The final pressure of the gas is 0.63 atm which has an initial pressure reading of 2.00 atm with a volume of 175.0 ml.
Given data in the question is:
Initial pressure- 2.00 atm
Initial volume- 175 ml
Final volume- 550 ml
The final pressure is supposed to be calculated,
As per the equation of the Boyle's law that we know:
P1V1=P2V2
Substituting the given data in the equation above:
(2)(175)=P2(550)
P2=(2)(175)/550
P2=0.6363 atm
Boyle's law states " The pressure of gas is inversely proportional to the volume occupied by the gas when the temperature(in kelvins) is held constant ".
The final pressure of the gas is 0.63 atm.
Learn more about Boyle's Law:
brainly.com/question/1437490
#SPJ4
A 19.84 gram object is placed into a beaker of water that has 40.0 mL of water in it. The final volume of the water in the container is 59.6 mL. What is the density of the object?
Answer:
the density of the object is 1 g/mL
Explanation:
a 5.34 g sample of an aluminum alloy is reacted with hydrochloric acid to produce aluminum chloride and hydrogen gas. at a temperature of 298 kelvin and a pressure of 1.03 atm, a volume of 1.53 l of hydrogen gas is collected. assuming that the hydrochloric acid only reacts with the aluminum in the sample, what is the percent of aluminum in the alloy sample? (solid aluminum reacts with hydrochloric acid to produce aluminum chloride and hydrogen gas).
The percent of aluminum in the alloy sample when hydrochloric acid only reacts with the aluminum is found to be 21.7%.
How should aluminium and hydrochloric acid be balanced?This single replacement reaction is described by the following balanced chemical equation: 2Al(s)+6HCl(aq)→2AlCl3(aq)+3H2(g).
Aluminium interacts with weak hydrochloric acid at room temperature. The dissolution of the metal in hydrochloric acid results in the production of aluminium chloride and colourless hydrogen gas. Because the finished products do not interact, this reaction cannot be stopped.
moles of H2 = PV/RT
=> 1.03atm X 1.53L / 0.0821 x 298K
=> 0.0644 mol H2
Balanced equation => 0.0644 mol H2 x 2 mol Al / 3 mol H2 x 26.98g/
1 mol Al
=> 1.16g Al
% Al = 1.16/5.34 x 100 = 21.7%
Learn more about hydrochloric acid here:
brainly.com/question/15102013
#SPJ4
Complete this Bronsted-Lowry reaction, placing each product by its appropriate label. HPO^2-_4 + BrO^-
Count the hydrogens on each component before and after the reaction to determine if it is an acid or a basic. Acid is the material whose hydrogen content has reduced.
What in chemistry is Brnsted-Lowry?A Brnsted-Lowry base must have at least one lone pair of electrons in order to absorb a proton and create a new connection with it. A proton is transferred from an acid to a base in an acid-base reaction, according to the Brnsted-Lowry definition.
What distinguishes Lewis acid base from Bronsted-Lowry?A Bronsted-Lowry base is a chemical that can take a hydrogen ion, whereas a Bronsted-Lowry acid can donate one. Lewis bases
To know more about hydrogen visit:
https://brainly.com/question/28937951
#SPJ4
Pinacolone: __ml; 0.50g 0.00499__ mol piperonal: 0,75 g 0,005 mol KOH: 0.3 0.00535 __mol Limiting Reagent: _Piperond. Product: Pinacolone-Piperonal Adduct 0.43 melting Point: Description of product appearance:_tihe gole Yellow Deedles Data Analysis: Calculate the Theoretical Yield (show calculation): Pinacolone-Piperonal Adduct Theoretical Yield: mol; Calculate the Percent Yield (show calculation): Actual Yield: - mol Percent Yield:
mol Percent Yield 47.25%.
Full calculation in image
To know more about Percent Yield visit:
https://brainly.com/question/17042787
#SPJ4
Which of the following salts, when added to water, will result in a solution with pH = 7.00?(a.) Ca (NO2)2(b.) NaNO3(c.) FeCl3(d.) NH4NO3
NH4NO3. The pH of a solution is determined by the concentration of hydrogen ions (H+) present in it.
What is concentration?Concentration, also known as “mental focus”, is the act of focusing one’s thoughts and energies on a specific task or activity. It is a key element of successful learning and is an important skill in all areas of life. Concentration is the ability to filter out unimportant or irrelevant information, maintain focus on the task at hand, and block out distractions. With strong concentration skills, individuals can more easily process and retain information, solve problems, and make decisions.
NH4NO3 is a salt that can release protons (H+) into solution, which will then be neutralized by hydroxide ions (OH-). Therefore, when NH4NO3 is added to water, a solution with pH = 7.00 will be formed.
To learn more about concentration
https://brainly.com/question/26255204
#SPJ4
which structural feature must a compound possess in order to be classified as an allylic carbocation?
C=C double bond adjacent to a carbocation is structural feature must a compound possess in order to be classified as an allylic carbocation.
Allylic Carbon MeaningThe double bond carbon atoms can be classified as vinylic and allylic carbon atoms. The general formula for a vinyl group is R-CH = CH 2 where both carbon atoms are bonded with a double bond and the R is attached in the vinylic position.
Because the two carbon atoms form a double covalent bond, they are sp 2 hybridized. The allylic position is also like the vinylic position. The allylic carbon is bonded to a carbon atom that is double bonded to another carbon atom.
Allylic Carbon Atom
The allylic carbon atom is an sp 3 hybridized carbon atom in the RCH 2 -CH=CH 2 allylic group bonded to the -CH=CH 2 group.
For example in propene, the highlighted carbon atom is an allylic carbon atom (CH 3 -CH=CH 2 ). Similarly, in cyclohexene, the carbon atom next to the double bond is an allylic carbon atom.
Learn more about allylic carbocation at https://brainly.com/question/28250336.
#SPJ4
using formal charges, which of these three resonance forms is likely to be the most important?
The correct option according to the formal charge is (B) , among the resonance structures of N₂O.
Dinitrogen monooxide: what are they?N2O, or dinitrogen monooxide, has three resonance configurations, two of which contribute significantly to the resonance. There are a total of 18 valence electrons in the N2O molecule: 6 from the nitrogen atom and 6 from each oxygen atom. All three resonance configurations exhibit atoms with complete octets and account for the 18 valence electrons. The same number of covalent bonds—2 sigma bonds and 2 pi bonds—are present in all three configurations. The location of the negative charge will tip the balance in favour of the structure on the upper right when comparing it to the structure in the upper left. The negative charge will be because oxygen is more electronegative than nitrogen.
What do dinitrogen monoxide resonance structures entail?Due to its larger separation of charge than the other two, the bottom structure will have a modest impact. The more electronegative oxygen atom is given a positive charge, and a nitrogen atom is given an extremely unstable (-2) formal charge. As a general rule, formal charges greater than (-1) or (+1) automatically suggest that the resonance structure is a modest factor. Dinitrogen monoxide can thus be represented by three resonance structures, with one major and two minor contributors.
To know more about octets, visit:
brainly.com/question/21089350
#SPJ4
The complete question is as follows :
this map shows the location of 52 cities. The temperature of each city is given in degrees. Draw isotherms at 5 intervals, beginning with the 0 isotherm in the upper right corner. Label each isotherm
A type of equal temperature at a specific period or date is represented by an isotherm on a geographic map. In terms of thermodynamics, a curve on a Pressure-Volume diagram at constant temperature is what we mean. We can actually see from the graph that the range is: 10 Fahrenheit degrees
What is the temperature?A system's temperature can be used to calculate its average kinetic energy. As the particle's velocity rises, the system's kinetic energy also begins to grow, which raises the temperature of the system. Heat is the energy that is transmitted when two bodies having different surface temperatures interact. When two bodies of different temperatures were kept in contact, the direction for heat transfer is dependent on the temperatures. SI units use the kelvin (K).
How do we measure temperature?We use thermometers to monitor temperature; chances are, you have one of them in your home for when you're feeling under the weather. Mercury-filled thermometers were once common, but they are no longer used because of the risk of mercury leakage or thermometer failure.
To know more about Temperature visit:
https://brainly.com/question/12035620
#SPJ4
Two students investigated the electrolysis of copper sulfate solution. When copper sulfate solution is electrolysed, copper is produced at the negative electrode What substance is produced at the positive electrode when copper sulfate solution is electrolysed
Oxygen gas is produced at the positive electrode of the solution.
What is produced?We know that the term electrolysis has to do with the process by which we can be able to cause the splitting of a compound that is ionic when we pass a direct current through the solution of the compound.
Now we know that at the negative electrode, we are going to have the copper metal that is discharged but at the positive electrode, we are going to have the discharge of oxygen gas. This is because it is higher in the series than sulfate ions.
Learn more about electrolysis:https://brainly.com/question/12054569
#SPJ1
Petunia needs 68.39 grams of potassium hydroxide (KOH) to run a reaction in class. How many moles of potassium hydroxide does she need?
The number of moles of potassium hydroxide needed by Petunia would be 1.22 moles.
Determination of moles from massesThe number of moles present in a given mass of a substance is the ratio of the mass of the substance and the molar mass of the substance. This can be mathematically expressed as:
Mole = mass/molar mass
In this case, we want to know the mole equivalent of 68.39 grams of potassium hydroxide (KOH) that Petunia needs. First, we need to determine the molar mass of KOH from the molar weights of its component atoms.
Molar weight of K = 39
Molar weight of O = 16
Molar weight of H = 1
Molar mass of KOH = 39+16+1 = 56 g/mol
Number of moles present in 68.39 grams of KOH = 68.39/56 = 1.22 moles.
In other words, the number of moles of potassium hydroxide that Petunia needs is 1.22 moles.
More on number of moles can be found here: https://brainly.com/question/12513822
#SPJ1
Determine how many grams of each of the following solutes would be needed to make 2.50 X 102 mL of a 0.100 M solution: a. cesium iodide (CSI)b. sulfuric acid (H2SO4)
The gram required for CsBr is 6.49 grams, H₂SO is 2.45 grams, Na₂CO₃ is 2.649 grams, K₂Cr₂O₇ is 7.35 grams and KMnO₄ is 3.95 grams
The mass can be calculate as follows:(a) cesium Iodide (CsI):
Molar mass of CsI = 259.809 g/mol
moles = molarity x volume
moles = 0.100 M x 0.25 L
moles = 0.025 moles
Mass of CsI required = moles * Molar mass
Mass of CsI required = 0.025 moles * 259.809 g/mol
Mass of CsBr required = 6.49 grams
(b) Sulfuric acid (H₂SO₄),
Molar mass of H₂SO₄= 98.079 g/mol
moles = molarity x volume
moles = 0.100 M x 0.25 L
moles = 0.025 moles
Mass of H₂SO = moles * Molar mass
Mass of H₂SO= 0.025 moles * 98.079 g/mol
Mass of H₂SO = 2.45 grams
(c) Sodium carbonate (Na₂CO₃),
Molar mass of Na₂CO₃ = 105.9888 g/mol
moles = molarity x volume
moles = 0.100 M x 0.25 L
moles = 0.025 moles
Mass of Na₂CO₃ = moles * Molar mass
Mass of Na₂CO₃= 0.025 moles * 105.9888 g/mol
Mass of Na₂CO₃ = 2.649 grams
(d) Potassium dichromate (K₂Cr₂O₇),
Molar mass of K₂Cr₂O₇ = 294.185 g/mol
moles = molarity x volume
moles = 0.100 M x 0.25 L
moles = 0.025 moles
Mass of K₂Cr₂O₇ = moles * Molar mass
Mass of K₂Cr₂O₇= 0.025 moles * 294.185 g/mol
Mass of K₂Cr₂O₇ =7.35 grams
(e) potassium permanganate (KMnO₄).
Molar mass of KMnO₄ = 158.034 g/mol
moles = molarity x volume
moles = 0.100 M x 0.25 L
moles = 0.025 moles
Mass of KMnO₄ = moles * Molar mass
Mass of KMnO₄= 0.025 moles * 158.034 g/mol
Mass of KMnO₄ = 3.95 grams
Your question is incomplete but most probably your full question was
Determine how many grams of each of the following solutes would be needed to make 2.50 x 102 mL of a 0.100 M solution: (a) Cesium iodide (CsI), (b) Sulfuric acid (H2SO4), (c) Sodium carbonate (Na2CO3), (d) Potassium dichromate (K2Cr2O7), (e) potassium permanganate (KMnO4).
learn more about mass at https://brainly.com/question/13900325
#SPJ4
An aerosol spray can with a volume of 250 mL contains 2.30 g of propane gas C3H8 as a propellant. If the can is at 25deg C, what is the pressure in the can? What volume would the propane occupy at STP? The can says that exposure to temperatures above 130 deg F may cause the can to burst. What is the pressure in the can at this temperature? (three questions in total)
According to the stated information, the pressure inside the container at this temperature is 5.59 atm.
Are aerosols bad for you?Numerous aerosol sprays include dangerous substances like formaldehyde and xylene, which are used to protect anatomical evidence in jars. In addition to being exceedingly dangerous for people, kids, and household pets, these toxic substances now include carcinogens and toxins.
2.30 g/ 44.097 g/mol (or 0.052 moles of propane)
V = 0.250
T = 25 + 273 = 298 K as a result.
p = nRT / V = 0.052 x 0.0821 x 298 / 0.250 =5.08 atm
At STP 1 mole => 22.4 L
Volume = 0.052 x 22.4 =1.164 L
130 F => 54.4 °C => 327.4 K
p = nRT / V = 0.052 x 0.0821 x 327.4 / 0.250 = 5.59 atm
To know more about Aerosol visit:
https://brainly.com/question/28853452
#SPJ4
Assume that you have the following perceptron with the assigned weights and the input values as shown. Further assuming that your perceptron will use an activation function based upon a simple step function with a threshold value of .5 (summation of weighted inputs must exceed .5), will the neuron fire and output a value and if so what value
Additionally assuming that your perceptron will employ an activation function based on a straightforward step function with a threshold value of 0.5, resulting in a no-value condition where it will not fire.
What is meant by perceptron?An artificial neuron is known as a perceptron. The simplest Neural Network is this one. The foundation of machine learning is comprised on neural networks. The perceptron is a technique for supervised learning for binary classifiers in machine learning. Using a vector of integers as input, a binary classifier is indeed a function that can determine whether or not the input belongs to a particular class.
Why is perceptron used?The data is often divided into two categories using perceptron. It also goes by the name Linear Binary Classifier for this reason. If you want to better comprehend machine learning offline as well. The bias term is a useful feature since it provides a second model parameter (in addition to weights) that may be adjusted to optimise the model's performance on training data. The bias weight's input value can be changed, and the default value is 1.
To know more about Perceptron visit:
https://brainly.com/question/29671015
#SPJ4
