Please Answer this question! I would be very grateful!

Momentum= mass × velocity

momentum= P

P= m×v

P= 5×4.5

P=22.5

I hope this helps.

Except for Pluto, all of the planets in the solar system have slightly elliptical orbits.    

Pluto, a dwarf planet, the orbit is highly elliptical, with an eccentricity of 0.25, and it travels between 4.4 and 7.4 109 kilometers (2.7-4.6 109 miles) from the Sun on average. As a result, Pluto's orbit occasionally brings it closer to the Sun than Neptune, which implies that sometimes Pluto is much closer to the Sun than other times.

Pluto orbits the Sun at an angle of 17 degrees. This indicates that Pluto occasionally orbits above the other planets and occasionally orbits below them.

Learn more about pluto here:

https://brainly.com/question/18726745

#SPJ4

The mass of the metre stick given the data from the question is 150 g

Clock wise moment = Anticlockwise moment

M × 25 = 150 × 25

M × 25 = 3750

Divide both sides by 25

M = 3750 / 25

M = 150 g

Learn more about equilibrium of force:

https://brainly.com/question/14023831

#SPJ1

The number of boxes were produced willl be 7.57.n stands for the no of boxes.

The term “volume” refers to the amount of three-dimensional space taken up by an item or a closed surface. It is denoted by V and its SI unit is in cubic cm.

The volume of the cylindrical metal bar;

V₁=πr²h

V₁=3.4 × 7² × 484 cm

V₁=80,634.4 cm³

The one side of the box is,220mm(22 cm)

V₂ = a³

V₂ = (22)³

V₂ = 10,648 cm³

The no of boxes is found as;

n = V₁/V₂

n=80,634.4 cm³/10,648 cm³

n=7.57

Hence, the number of boxes were produced willl be 7.57

To learn more about the volume, refer to https://brainly.com/question/1578538

#SPJ2

Answer:

a = 1.05m.s²

Explanation:

Fnet = m×a

Fapplied - friction = m×a

1172 - 962 = 200 × a

210 = 200a

a = 1.05

The relative ages of the moon's maria and highlands can be determined through the following:

This is referred to as the early geologic units of the moon which arose from asteroid impact and subsequent volcanic activity.

The ages can be measured using techniques such as radioactive dating and crater density.

Read more about Moon maria here https://brainly.com/question/14392864

#SPJ11

Answer:

Plane Motion

Plane Motion One of the most common examples of motion in a plane is Projectile motion.

Particles that are closely packed but spaced apart enough to move over one another are called plasma. Option C is correct.

Plasma is a state of matter wherein particles are tightly packed but are far enough apart to slide over one another.

The following conditions are followed by the plasma state.

Hence, option C is correct.

To learn more about the plasma state refer;

https://brainly.com/question/5496865

#SPJ1

One of the most important features that must be explained by models during the formation of the galaxy is the difference in age and metallicity of stars.

This is defined as the proportion of heavy elements present in a star and they are usually heavier than hydrogen or helium.

These elements and the age of stars have to be put into consideration when discussing the formation of the galaxy.

Read more about Metallicity here https://brainly.com/question/13058542

#SPJ11

The statement that best describes Keisha errors is an object in either state of equilibrium must have no net force acting on it.

An object is said to be on a dynamic equilibrium when it moves at a constant speed, and all the forces on the object are balanced.

An object is also said to be on static equilibrium when it is unable to move because all the forces which act on it compensate for one another.

Therefore, the statement that best describes Keisha errors is an object in either state of equilibrium must have no net force acting on it.

Learn more about force here:

https://brainly.com/question/25239010

#SPJ1

The vertices of the path of the comet e are (-12,0) and (+12,0) as it is moving an elliptical path.

Given, that the Sun is located at the origin.

Comet e is modeled by

((y + 16)²)/400 + (x²)/144 = 1

This is an equation of an ellipse. So, the path traveled by Comet e is an elliptic path.

Comparing with the Standard equation of ellipse:

((y - k)²)/(b²)+ ((x - h) ²)/(a ²) = 1

whose, Centre is (h,k) and Vertex is (h±a, 0)

On Comparing Centre (h, k), h= 0 and k = -16 &

a²=144

a = 12

and,

b²=400

b=20

So, Centre (0, -16),

Vertex (-12,0) and (+12,0)

So, the vertices of the path of the comet e are (-12,0) and (+12,0).

Learn more about ellipse here:

https://brainly.com/question/16904744

#SPJ10

The compass is designed and developed to use a pendulous system to improve horizontality.

A compass can be defined as a scientific instrument that contains a magnetized pointer, which is used to show and indicate the following four (4) main cardinal directions:

Basically, the compass is a scientific instrument that's designed and developed to use a pendulous system to improve horizontality.

Read more on compass here: https://brainly.com/question/11165627

#SPJ12

The function of V" in this designation is A. That the sun is a main sequence star

It should be noted that the sun is the star at the center of the solar system.

In this case, the function of V" in this designation is that the sun is a main sequence star

In conclusion, the correct option is A.

Learn more about sun on:

brainly.com/question/15837114

#SPJ12

The purpose of the scapula to move during arm elevation is increase the range of elevation of the arm.

The scapula is an important bone which is found in the shoulder and back region of the body.

The scapula enables and increases the range of motion of the arm with its motions.

During arm elevation, the scapula undergoes an upward rotational motion.

Therefore, the  purpose of the scapula to move during arm elevation is increase the range of elevation of the arm.

Learn more about scapula motion at: https://brainly.com/question/5133017

#SPJ12

Explanation:

An atmosphere (atm) is a unit of measurement equal to the average air pressure at sea level but liquid pressure is exerted on the surface of an object in a liquid.

And they also differ in formulas. We can calculate atmospheric pressure in two ways. First we can get the atmospheric pressure by an instrument called barometer. And the second one is by usin this formula, atmospheric pressure = density of mercury x acceleration due to gravity x height of column of mercury. But this equation will only work if the atmospheric pressure is being measured by mercury.

But the formula for liquid pressure is defferent and the instrument used to measure the liquid pressure is also defferent.

The instrument used to measure the liquid pressure is pressure gauge. And the formula for the liquid pressure is density x height x gravity. Please give me a like and thank me.

please.

Answer:

Coolant absorbs thermal energy

Explanation:

Since the coolant is used to refrigerate the engine, it have to absorb the thermal energy

From the calculations, the mass of the pole is 82 Kg.

The term potential energy has to do with the energy that is possessed  by a body by virtue of its position.

Given that;

height = 6.15 m

PE = 4942 J

mass = ??

g = 9.8 m/s^2

Now

PE = mgh

m = PE/gh

m =  4942 J/9.8 m/s^2 * 6.15 m

m = 82 Kg

Learn more about potential energy:https://brainly.com/question/24284560?

#SPJ1

The magnitude of the average acceleration of the ball during this time interval will be 1969.69 m/s².

The rate of velocity change concerning time is known as acceleration.

Given data;

Initial velocity, u= 27.5 m/s

Rebound velocity, v= 21.0 m/s

Time elapsed, t = 3.30 × 10⁻³ seconds.

To find ;

Average acceleration, a

The average acceleration when the change in velocity is observed by the formula as:

[tex]\rm a_{avg}= \frac{v-u}{t}[/tex]

Substitute the given values:

[tex]\rm a_{avg}= \frac{27.5-21.0}{3.30 \times 10^{-3}} \\\\ a_{avg}= 1969.69 \ m/s^2[/tex]

Hence, the magnitude of the average acceleration of the ball during this time interval will be 1969.69 m/s².

To learn more about acceleration, refer to the link https://brainly.com/question/2437624#SPJ1.

#SPJ1

When a substance changes from a liquid to a solid, they move more slowly and become fixed in position. Option A is correct.

When a substance changes from a liquid to a solid, its particles lose energy and move more slowly. As the temperature decreases, the particles lose kinetic energy and start to arrange themselves into a fixed, ordered pattern. This causes the substance to solidify and the particles become fixed in position.

The transition from a liquid to a solid state is called freezing or solidification. During this process, the particles lose energy and their motion becomes more restricted, causing them to move more slowly and eventually become fixed in position. Option A is correct.

To know more about liquid, here

brainly.com/question/20922015

#SPJ1

The scalar components of vector c are:

Here we have the vectors:

a = <35m/s, 15m/s>

b = <-22 m/s, 18 m/s>

And we want to find the difference, which is given by:

c = a - b = <35m/s, 15m/s> -  <-22 m/s, 18 m/s>

The difference is computed component by component, so we get:

c = <35m/s + 22m/s, 15m/s - 18m/s>

c = <57 m/s, -3 m/s>

Then the scalar components of vector c are:

cx = 57 m/s

cy = -3 m/s.

If you want to learn more about vectors:

https://brainly.com/question/3184914

#SPJ11

Answer:

D

Explanation:

The friction force is the weight force times the coefficient of friction. So diving by the coefficient gives you the weight force which is equivalent to the normal force.

The equation that we can used to determine the frictional force using the coefficient of kinetic friction and the normal force is given by the expression : F = u N.

Where N is the normal force by the weight of the body.

Frictional force is a type of force acting on a body to prevents its motion. Hence, the frictional force is always negative. Frictional force acting on an object is making a resistance to the motion of the object.

There are both kinetic frictional force and static frictional force. The coefficient of frictional force is the ratio of the frictional force to the normal force on the object. The normal force on the object is equal to m g that is the force by its own weight.

If u is the coefficient of kinetic friction and N be the normal force acting on the object, then the force of kinetic frictional force F is given by,

F = u N.

Where N = mg.

To find more on frictional force, refer here:

https://brainly.com/question/13000653

#SPJ2

Answer:

I think it would be C: open primary

Explanation:

Given that, 1 Liter equals 1.0567 quartz and 1 quartz equals 32 oz, the volume 1.00 oz equals 0.02957 L.

Given that;

First, we convert 1.00 oz to qt

32 oz = 1 qt

1.00 oz = x

x = 1.00 / 32

x = 0.03125 qt

Now, we convert 0.03125 qt to liter

1.0567 qt = 1 L

0.03125 qt = x

x = 0.03125 / 1.0567

x = 0.02957 L

Given that, 1 Liter equals 1.0567 quartz and 1 quartz equals 32 oz, the volume 1.00 oz equals 0.02957 L.

Learn more about conversion from ounces to liters: https://brainly.com/question/11815188

#SPJ12

The instrument that would be the most help in finding this cloud is D. a sensitive infra-red telescope in orbit around the Earth.

It should be noted that an astronomer is a scientist who focuses on the study of the Earth.

In this case, the instrument that would be the most help in finding this cloud is a sensitive infra-red telescope in orbit around the Earth.

Learn more about astronomy on:

brainly.com/question/1141458

#SPJ12

The amount of oxygen will be 22.29 gm required to produce 37.15 g co₂.

One or more compounds, known as reactants, are transformed into one or more distinct substances, known as products. Such a process is known as a chemical reaction.

Given reaction;

[tex]\rm C_3h_8 +5O_2 }\rightarrow 3CO_2 +4H_2O[/tex]

The quantity of oxygen is x and the quantity of carbon dioxide is y then the ratio of their composition is found as;

5x=3y

5x=37.15

x=3×37.15/5

x=22.29 gm

Hence the amount of oxygen will be 22.29 gm

To learn more about the chemical reaction refer to the link;

https://brainly.com/question/22817140

#SPJ1

Answer: 45.02 (g O2)

Explanation: The person above me is wrong...but this is the right answer on edge! Ik cuz i just did this assignment and got 100% Hope this helps :D

Considering the Doppler efect, the frequency heard by the student would change if:

The Doppler effect is defined as the change in the apparent frequency of a wave produced by the relative motion of the source with respect to its observer. In other words, this effect is the change in the perceived frequency of any wave motion when the sender and receiver, or observer, move relative to each other.

In summary,  there is always a change in the frequency of sound as the source of the sound moves towards or away from the observer. So, the Doppler Effect is an alteration of the observed frequency of a sound due to the movement of the source or the observer, that is, they are changes in the frequency and wavelength of a wave due to the relative movement between the wave source and the observer.

In this case, considering the Doppler effect, the frequency heard by the student would change if:

Learn more about Doppler effect:

brainly.com/question/15307081

brainly.com/question/4052291

brainly.com/question/15097772

brainly.com/question/3841958

#SPJ1

The findings that most likely contributed to Jenna's conclusion were a change in smell. Option A is correct.

A fragrance, usually an unpleasant one: The smell of sweaty feet was palpable throughout the space. Our body odor has a big impact on the kinds of scents we enjoy.

The complete question is;

"Jenna pulled out an open bowl of leftover mashed potatoes from the fridge and smelled something different. She discovered that since the potatoes were initially placed there, chemical changes had taken place. Which facts most likely supported Jenna's judgment?

a change of odor

a decrease in temperature

a change in moisture content

a decrease in mass"

The observation that most likely inspired Jenna to draw her conclusion was a change in odor.

Hence, option A is correct.

To learn more about the odor refer;

https://brainly.com/question/5396055

#SPJ1

Answer:

A change in odor

Explanation:

Answer:

D

Explanation:

the answer is D to me

the answer is D to me

Answer:

42.417 cm³

Explanation:

The formula to find the volume of a cone is :

V = [tex]\frac{1}{3}[/tex] × π r² h

Here,

r ⇒ radius ⇒ 3 cm

h ⇒ height ⇒ 4.5 cm

Let us find it now.

V = [tex]\frac{1}{3}[/tex] × π r² h

V = [tex]\frac{1}{3}[/tex] × π × 3 × 3 × 4.5

V = [tex]\frac{1}{3}[/tex] × π × 9 × 4.5

V = [tex]\frac{1}{3}[/tex] × π × 9 × 4.5

V = [tex]\frac{1}{3}[/tex] × π × 40.5

V = [tex]\frac{1}{3}[/tex] × 3.142 × 40.5

V = [tex]\frac{1}{3}[/tex] × 127.251

V = 42.417 cm³

The elapsed time when the particle returns to the origin is determined from the ratio of initial velocity and acceleration of the particle.

The time of motion of the particle is calculated by applying Newton's second law of motion.

F = ma

F = m(v)/t

where;

a = v - u/t

v = u + at

when the particle returns to the origin, direction of u, = negative.

final velocity = 0

0 = -u + at

at = u

t = u/a

Learn more about force here: https://brainly.com/question/12970081

#SPJ11