Please can someone help I will mark brainiest!

Answer:

Rainwater is slightly acidic because...Water reacts with carbon dioxide to form carbonic acid. Due to high carbon dioxide emission in oceans, it explains why sea waters are acidic. Carbonic acid then breaks down into hydrogen ions and hydro carbonates ions. The hydrogen ion raises the water pH and, thus, causes the rainwater to be slightly acidic.

Answer:

Explanation:

rainfall is slightly acidic because of the presence of dissolved carbonic acid. ... The gases of sulfur oxides and nitrogen oxides are chemically converted into sulfuric and nitric acids.

Answer:

burning is a rapid process, rustig is a slow process. burning releases light during the process,rusting does not. burning can speed up with addition of more external conditions, rusting cannot be sped up greately by addition of external materials. burning results in release of large amts of heat, rusting very little amt of heat

Hope helped

plesse give a thank

and most brainlest

-Rust happens when something is unpolished and is old. Burning has been modified by heat.

-Burning is a chemical change. Rust is a physical change.

-Burning something cannot be fixed back to its natural form, while when something is rusted it can possibly be re-used and fixed.

-The texture of something burnt is usually fragile and brittle while rust makes (metal for example) gritty.

-Rust usually forms solely on metals while almost anything can be burned.

note: you asked for 4 answers but i gave you 5 in case you didnt like any of them. Hope this helps!

Answer:

B

Explanation:

The molecular formula for pentyne is C5H8

Answer:

yes, a compound can have more than one carbon-carbon double bond

Answer:2

Explanation:

Answer:

2

Explanation:

Answer:

12.78 or 12.80 mostly like 12.78

Explanation:

Answer:

4

Explanation:

Answer:

Ancient CO₂ levels can be measured from

1) Air bubbles trapped in deep ancient ice cores (up to 800,000 years ago) or

2) Tree rings (up to 10,000 years ago)

Explanation:

The percentages of CO₂ concentration in the atmosphere from previous or ancient times are found by analyzing the CO₂ content in trapped air located in the deep ancient ice cores present in Antarctica and Greenland such as the EPICA Dome C cores

As the ice is drilled though, the air released from trapped bubbles are captured for analysis and the time frame for the captured bubbles can date back up to 800,000 years

Ancient CO₂ levels can also be measured from tree rings which provide ancient CO₂ levels up to 10,000 years

Answer:

23.6°C

Explanation:

Step 1:

Data obtained from the question. This include the following:

Mass = 0.125kg = 0.125 x 1000 = 125g

Initial temperature (T1) = 22°C

Heat (Q) generated in 4.5mins = 835J

Specific heat capacity (C) of water = 4.184J/g°C

Change in temperature (ΔT) =?

Final temperature (T2) =?

Step 2:

Determination of the change in temperature, ΔT of water.

This can be obtained as shown below:

Q = MCΔT

835 = 125 x 4.184 x ΔT

Divide both side by 125 x 4.184

ΔT = 835 / (125 x 4.184)

ΔT = 1.6°C

Therefore, the change in temperature, ΔT is 1.6°C

Step 3:

Determination of the final temperature of water.

This can be obtained as follow:

Initial temperature (T1) = 22°C

Change in temperature (ΔT) = 1.6°C

Final temperature (T2) =?

Change in temperature (ΔT) = Initial temperature – Final temperature

ΔT = T2 – T1

1.6 = T2 – 22

Collect like terms

T2 = 1.6 + 22

T2 = 23.6°C

Therefore, the final temperature of the water is 23.6°C.

Answer:

The pictures to the right, show two different models of the atom. Type in the letter of your answer.

Which model best represents Dalton’s atomic theory?  

B

Which model best represents the modifications to the theory that Thomson’s results made necessary?  

A

The model that represents Dalton's atomic model is the B model.

Dalton was a scientist who described how the atom is characterized, stating that the atom would be a massive and indestructible sphere, that is, it was not divided into subparticles (electrons, protons and neutrons).

Thus, model B is the most suitable according to Dalton's statements.

Learn more about atomic theories in: brainly.com/question/13157325

Answer:

[tex]\large \boxed{\text{299.4 g}}[/tex]

Explanation:

We will need a chemical equation with masses and molar masses, so, let's gather all the information in one place.

Mᵣ:        44.10                          44.01

              C₃H₈   +   5O₂   ⟶   3CO₂   +   4H₂O

m/g:  100.00

To solve a stoichiometry problem, you must

1. Moles of C₃H₈

[tex]\text{Moles of C$_{3}$H}_{8} = \text{100.00 g C$_{3}$H}_{8} \times \dfrac{\text{1 mol C$_{3}$H}_{8}}{\text{44.10 g C$_{3}$H}_{8}} = \text{2.268 mol C$_{3}$H}_{8}[/tex]

2. Moles of CO₂

The molar ratio is 3 mol CO₂:1 mol C₃H₈

[tex]\text{Moles of CO}_{2} = \text{2.268 mol C$_{3}$H}_{8} \times \dfrac{\text{3 mol CO}_{2}}{\text{1 mol C$_{3}$H}_{8}} = \text{6.803 mol CO}_{2}[/tex]

3. Mass of CO₂

[tex]\text{Mass of CO}_{2} = \text{6.803 mol CO}_{2} \times \dfrac{\text{44.01 g CO}_{2}}{\text{1 mol CO}_{2}} = \textbf{299.4 g CO}_{2}\\\text{The mass of CO$_{2}$ required is $\large \boxed{\textbf{299.4 g}}$}[/tex]

Answer:

Number of moles of propane:

=Mass in grams ÷ Relative molecular Mass

= 100/((12*3) + (1*8))

= 100 ÷ 44

= 2.2727

Mole ratio propane:carbon (IV) oxide = 1:3(from the equation)

Number of moles of CO2 = 3*2.2727 = 6.8181

Mass in grams = Relative molecular Mass * Number of moles

= 44 * 6.8181

= 299.9964 grams

Explanation:

Answer:

C. A linear, nonpolar molecule

Explanation:

Molecules which are alike usually have the same degree of pull which results in them sharing electrons. This sharing of electrons is known as the molecules exhibiting Covalent bonding between them.

The equal pull also results in the cancelling out of electrons and favoring non polar bonds due to the absence of free electrons which would have been able to interact with H2O in a polar binding system.

Answer:

C

Explanation:

APEX

Answer:

I think its D sorry if im wrong

Answer:i think its D

Explanation:

Answer:

9*(10+9)

(90+81)

(171) is the answer

Answer:

Both of them are polluting the environment. Industrial pollution is the pollution caused from industries and it can be in different forms such as water waster or air pollution. Agricultural pollution is caused from plants or crops that are grown by the farmers. For example, pesticides that may ruin the soil and is dangerous for our environment.

Explanation:

Answer:

The final temperature will be "12.37°".

Explanation:

The given values are:

mass,

m = 0.125 kg

Initial temperature,

c = 22.0°C

Time,

Δt = 4.5 min

As we know,

⇒  [tex]q=mc \Delta t[/tex]

On putting the estimated values, we get

⇒     [tex]=0.125\times 22.0\times 4.5[/tex]

⇒     [tex]=12.37^{\circ}[/tex]

Answer and Explanation:

For computing the initial quantity of helium we have to apply the law of ideal gas which is shown below:

[tex]pV=nRT\[/tex]

[tex]n=\dfrac{pV}{RT}[/tex]

Now we have to compute the ratio between the initial and the final numbers of moles which is

[tex]\dfrac{n_1}{n_2}=\dfrac{\dfrac{p_1V_1}{RT_1}}{\dfrac{p_2V_2}{RT_2}}[/tex]

The statement defines that

[tex]T_1=T_2,~p_1=p_2.[/tex]

Therefore

[tex]\dfrac{n_1}{n_2}=\dfrac{V_1}{V_2}[/tex]

[tex]\dfrac{n_1}{3.8\times10^{-4}}=\dfrac{230}{860}\iff\\\\ n_1=\dfrac{3.8\times10^{-4}\times230}{860}[/tex]

[tex]\boxed{n_1\approx1.0\times10^{-4}~mol}[/tex]

And, the variables are known is starting volume and ending gas quantity

Answer:

beginning volume and ending quantity of gas

Explanation:

Answer:

Explanation: d

Answer:

Na2CO3

Explanation:

Na2CO3 is a compound soluble in water. So the correct option is A.

The common ionic solids' solubility laws are as follows. When two rules seem to conflict with one another, the prior rule is used.

Therefore, the correct option is A

Read more about solubility, here

https://brainly.com/question/8591226

#SPJ2

Answer:

it burns through oxygen gas.... through the process known as combustion.... combustion is the process of burning materials in the presence of Air

Answer:

Did you mean solution??

In chemistry, a solution is considered as a special type of homogeneous mixture composed of two or more substances. In such a mixture, a solute is a substance dissolved in another substance, known as a solvent.

Eg: sweet tea or coffee (sugar added to solution)

     bleach (sodium hypochlorite dissolved in water)

HOPE IT HELPS :)

Answer:

option c

enzymes are protein molecules that act as catalysts to speed up bio chemical reactions

Answer:

X= -Y + 2/2     Y=-X + 3/2

Explanation:

I don't know how to simplify it anymore. You would get x=-y+3/2 and y=-x+3/2

Answer:

Explanation:

(-1/2,1)

Answer:

Graphitic carbon nitride (g-C3N4) is a rising two-dimensional material possessing intrinsic semiconducting property with unique geometric configuration featuring superimposed heterocyclic sp2 carbon and nitrogen network, nonplanar layer chain structure, and alternating buckling. The inherent porous structure of heptazine-based g-C3N4 features electron-rich sp2 nitrogen, which can be exploited as a stable transition metal coordination site. Multiple metal-functionalized g-C3N4 systems have been reported for versatile applications, but local coordination as well as its electronic structure variation upon incoming metal species is not well understood. Here we present detailed bond coordination of divalent iron (Fe2+) through micropore sites of graphitic carbon nitride and provide both experimental and computational evidence supporting the aforementioned proposition.

Answer:

D) The attractive force decreases as the atom gets larger.

Explanation:

i did the lesson and tried all 3, all 3 times, this was the last one and only choice left so it has to be.

Answer:

The attractive force decreases as the atom gets larger.

Explanation:

Answer:

Octane number, measure of the ability of a fuel to resist knocking when ignited in a mixture with air in the cylinder of an internal-combustion engine.

Octane number is also known as octane rating. Octane numbers are based on a scale on which isooctane is 100 (minimal knock) and heptane is 0 (bad knock). The higher the octane number, the more compression required for fuel ignition. Fuels with high octane numbers are used in high performance gasoline engines.

(Hope this helps) Sky

Answer:idioma equivocado ????

Explanation:

Answer:

Explanation:

As you move from left to right in periodic table the size of atom size decreases, electrongeativity increases.

it mean

Boron is bigger in size than Nitrogen

Boron is less electroneagive than Nitrogen.

can you find simialr to this another factor to realte

Answer:

The solution formed is acidic

pH = 0.87

Explanation:

The acid-base reaction of NaOH with HCl is:

NaOH + HCl → NaCl + H₂O

Where 1 mole of NaOH reacts with 1 mole of HCl

In the problem, moles of NaOH and HCl are:

NaOH: 0.0250L × (0.525mol / L) = 0.013125 moles NaOH

HCl: 0.0750 × (0.355mol / L) = 0.026625 moles HCl

As moles of HCl > moles NaOH, HCl is in excess and the solution formed is acidic

Moles in excess of HCl are:

0.026625 moles - 0.013125 moles = 0.0135 moles HCl

As the volume of the solutions is 25.0mL + 75.0mL = 100.0mL = 0.100L, molarity of HCl after reaction is:

0.0135 moles HCl / 0.100L = 0.135M HCl = 0.135M H⁺

As pH is defined as - log [H⁺], pH of the solution is:

pH = -log 0.135M H⁺ = 0.87

pH = 0.87

The pH of the resulting solution of the acid and base mixture is; Acidic with a PH = 0.87

We are given;

Volume of NaOH = 25 mL = 0.025 L

Volume of HCl = 75 mL = 0.075 L

Concentration of NaOH = 0.525 M

Concentration of HCl = 0.355 M

Total volume of solution = 0.025 + 0.075 = 0.1 L

Now, the the equation of the reaction is;

HCl + NaOH = NaCl + H2O

We can see that 1 mole of HCl reacts with 1 mole of NaOH.

Since; number of moles = Volume × concentration

Number of moles of HCl = 0.075 × 0.355

Number of moles of HCl = 0.026625 moles

Similarly;

Number of moles of NaOH = 0.025 × 0.525

Number of moles of NaOH = 0.013125 moles

We can see that the number of moles of HCl is greater than that of NaOH and as such there is excess HCl acid in the mix.

Thus,

Excess moles of HCl acid = 0.026625 - 0.013125

Excess moles of HCl acid = 0.0135 moles

Concentration of this excess HCl is gotten by the formula;

M = Excess moles/total volume

M = 0.0135/0.1

M = 0.135 M

PH of this excess concentration is;

PH = -log [H+]

PH = -log [0.135]

PH = 0.87

Read more about PH of resulting solution at; https://brainly.com/question/2378979