Answer:
Hexenes + Dioxygen = Carbon Dioxide + Water
The reaction type is combustion.
Its reactants are Hexenes - C6H12 and Dioxygen - O2
its products are Carbon Dioxide - CO2 and Water - H2O
Explanation: This was my yesterdays class
The elementary reaction 2H2O(g)↽−−⇀2H2(g)+O2(g) proceeds at a certain temperature until the partial pressures of H2O, H2, and O2 reach 0.0900 bar , 0.00100 bar , and 0.00350 bar respectively. What is the value of the equilibrium constant at this temperature?
Answer:
3.89 ×10^-5
Explanation:
Since they are gaseous reactants, we obtain the equilibrium constant from the given partial pressures;
p(H2O) = 0.0900 bar
p(H2) = 0.00100 bar
p(O2) = 0.00350 bar
The equation of the reaction is;2H2O(g)⇄2H2(g)+O2(g)
Kp= p(H2) . p(O2)/p(H2O)
Kp= 0.00100 × 0.00350/0.0900
Kp= 3.89 ×10^-5
A given solution has 42.5 g NaNO3 in 1500 mL of water. What is the molarity of this solution? Show your work, rounding the atomic mass of each element to the nearest tenth and your final answer to the nearest hundredth
Explanation:
here's the answer to your question
A person uses 400.8 kcal of energy to run a race. Convert the energy used for the race to the following energy units:
(provide an answer in 4 significant figures)
Calories
calories
Food Calories
Joules
Kilojoules
Hint: 1kcal=4.184kJ
Calories, we know that fat burn is calories.
“Enter the conjugate acids of no2- and no3-“
Answer:
nitrit,nitrat
2. Write the chemical equation for the reaction NaOH Sodium Hydroxide AgNO3 Silver Nitrate
Answer:
AgNO3 + NaOH = AgOH + NaNO3.
Explanation:
Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.
Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.However, the equation balanced here is the initial reaction which produces AgOH and NaNO3.
Determine whether the following statement is TRUE (T) or FALSE (F).
When a Cl- channel on the plasma membrane opens, Cl- flows inward because the [Cl-] inside the cell is lower than that on the outside.
Answer:
I say the statement is true
6. Who stated that matter is not composed of particles
After careful consideration your answer is...
Leucippus and Democritus
*Hope I helped*
~Alanna~
Answer:
The first theories of matter were put forward by Empedocles in 450 BC, he proposed that all matter was composed of four elements - Earth, air, fire and water. Later, Leucippus and Democritus suggested matter was made up of tiny indestructible particles continuously moving in empty space.
Explanation:
Gaseous methane (CH4) will react with gaseous oxygen (O2) to produce gaseous carbon dioxide (CO2) and gaseous water . Suppose 2.73 g of methane is mixed with 6.7 g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
3.8g of H2O are produced
Explanation:
The balanced reaction of the problem is:
CH4 + 2O2 → CO2 + 2H2O
Where 1 mole of CH4 reacts with 2 moles of O2
To solve this question we need to find, as first, the moles of each reactant in order to find limiting reactant. With limiting reactant we can find the moles of H2O produced and its mass as follows:
Moles CH4 - 16.04g/mol-
2.73g * (1mol/16.04g) = 0.170 moles CH4
Moles O2 -32g/mol-
6.7g (1mol/32g) = 0.209 moles O2
For a complete reaction of 0.170 moles of CH4 are needed:
0.170 moles CH4 * (2 mol O2 / 1mol CH4) = 0.340 moles O2
As there are just 0.209 moles of O2, oxygen is limiting reactant
The moles of water produced are:
0.209 moles O2 * (2mol H2O / 2mol O2) = 0.209 moles H2O
Mass water -Molar mass: 18.01g/mol-
0.209 moles H2O * (18.01g/mol) = 3.8g of H2O are produced
Which of the following will affect the rate of a chemical reaction?
solution temperature
solution color
solute mass
solution volume
Answer:
Solution temperature.
Explanation:
Hello there!
In this case, considering this question about chemical kinetics, it will be possible for us to analyze two perspectives:
1. Molecular: here, we infer that the solution temperature will provide more energy to the molecules in order to undergo more effective crashes which will make more products and therefore, increase the rate constant.
2. Mathematical: by means of the Arrhenius equation, it will be possible to tell that the increase in the temperature of the system, the negative of the exponent present in such equation will increase and therefore turn the rate constant bigger.
In such way, we infer the answer is solution temperature.
Regards!
Gu
Magnesium metal is reacted with hydrochloric acid to produce
hydrogen gas. A sample of hydrogen gas is collected over water
in a eudiometer at 28.0°C. The atmospheric pressure is 636
mmHg. Determine the pressure (in atm) of the hydrogen gas
produced
Pressure =
atm
The pressure of hydrogen gas is 607.7 mmHg
According of Dalton's law of Partial pressure, the total pressure of a mixture of gases is the sum of the partial pressures of the individual gases in the mixture.
We can now write;
The for hydrogen collected over water, we have a mixture of hydrogen gas and water vapour.
Total pressure = pressure of hydrogen gas + vapour pressure of water
Pressure of hydrogen gas = Total pressure - vapour pressure of water
Pressure of hydrogen gas = 636 mmHg - 28.3 mmHg
Pressure of hydrogen gas = 607.7 mmHg
For more information see https://brainly.com/question/14119417
pplication)Using multiple models simultaneously: This FNT refers to a processinvolving three moles of a diatomic gas (which behaves as an ideal gas).The PV curve at right describes this process.Assume, as is typical near room temperature,vibrational modes are frozen out.a)Determine the energy transferred as work, the change in internal energy, and the energy transferred as heat in this process. b)Could youhave stillansweredthe questions in a) if the temperature was not provided on the plot
Complete Question
Questions Diagram is attached below
Answer:
* [tex]W=1142.86Joule[/tex]
* [tex]Q=997.7J[/tex]
* [tex]H=2140.5J[/tex]
Explanation:
From the question we are told that:
Temperature [tex]T=337K[/tex]
Pressure [tex]P=(60-55)Pa*10^5[/tex]
Volume[tex]V=(1.6-1.4)m^3*10^{-3}[/tex]
Generally the equation for gas Constant is mathematically given by
[tex]\frac{P_2}{P_1}=\frac{V_1}{V_2}^n[/tex]
[tex]\frac{55*10^5}{60*10^5}=\frac{1.4*10^{-3}}{1.6*10^{-3}}^n[/tex]
[tex]n=0.65[/tex]
Therefore
Work-done
[tex]W=\int{pdv}[/tex]
[tex]W=\frac{55*10^5*1.6*10^{-3}*60*10^5*1.4*10^{-3}}{1-0.65}[/tex]
[tex]W=1142.86Joule[/tex]
Generally the equation for internal energy is mathematically given by
[tex]Q=mC_vdT\\\\Q=\frac{3*1*3.314*16}{1.4-1}[/tex]
[tex]Q=997.7J[/tex]
Therefore
[tex]H=Q+W[/tex]
[tex]H=997.7J-11.42.9[/tex]
[tex]H=2140.5J[/tex]
Arrange these elements according to electron affinity.
a. He
b. C
c. F
Answer:
[tex]F>C> H_e[/tex]
Explanation:
From the question we are given
a. He
b. C
c. F
Generally
The electron affinity of an atom or molecule is defined as the amount of energy released when an electron is attached to a neutral atom or molecule in the gaseous state to form a negative ion.
Therefore
The order of electron Affinity is give as
[tex]F>C> H_e[/tex]
Elements arranged according to increasing electron affinity is He, C, F.
Electron affinity is a measure of the ability of an atom or molecule to attract and accept an electron. It quantifies the energy change that occurs when an electron is added to a neutral atom or ion in the gaseous state.
When an atom or ion gains an electron, it undergoes a process called electron attachment or electron capture. The electron affinity is the energy released or absorbed in this process. A higher electron affinity value indicates a stronger attraction for electrons.
The electron affinity is typically expressed in units of energy, such as electron volts (eV) or kilojoules per mole (kJ/mol). It can be either positive or negative. A positive electron affinity indicates that energy is released when an electron is added, while a negative electron affinity indicates that energy is required to add an electron.
Learn more about Electron affinity, here:
https://brainly.com/question/13646318
#SPJ6
Why is the formation of fructose-1,6-bisphosphate a step in which control is likely to be exercised in the glycolytic pathway
Select all that are true for both a voltaic cell and an electrolytic cell. Group of answer choices There must be a complete circuit to allow electrons to flow. The redox reaction is spontaneous. Oxidation happens at the anode. Reduction happens at the cathode. The redox reaction is non-spontaneous. g
Answer:
There must be a complete circuit to allow electrons to flow. Oxidation happens at the anode. Reduction happens at the cathode.
Explanation:
Select all that are true for both a voltaic cell and an electrolytic cell.
There must be a complete circuit to allow electrons to flow. YES. This is true for both cells.
The redox reaction is spontaneous. NO. This is only true for the voltaic cell.
Oxidation happens at the anode. YES. This is true for both cells.
Reduction happens at the cathode. YES. This is true for both cells.
The redox reaction is non-spontaneous. NO. This is only true for the electrolytic cell.
The statements that have been true for both voltaic and electrolytic cells are:
Option A: There must be a complete circuit to allow electrons to flow.
Option C: Oxidation happens at the anode.
Option D: Reduction happens at the cathode.
The electrolytic cells are the one that converts electrical energy into chemical energy. Voltaic cells convert chemical energy into electrical energy.
From the given options, the best-suited option for both electrolytic and voltaic cells are:
For any of the cells to perform the current flow, the circuit must be complete. Option A stating that there must be a complete circuit to allow electrons to flow is correct.The redox reaction has been a spontaneous reaction and results in the chemical conversion to form energy. Since the chemical energy has been converted into electrical energy, statement B has been true for only Voltic cells. Thus option B is incorrect.Oxidation is the reaction to the loss of electrons. In both cells, oxidation happens at the anode. Thus, option C is correct.Since oxidation takes place at anode, cathode acts as the reduction end in both the cells. Thus option D is correct.The redox reaction has been non-spontaneous only in the electrolytic cell. Thus option E is incorrect.The statements that have been true for both voltaic and electrolytic cells are, Option A, C, and D.
For more information about the electrolytic and voltaic cell, refer to the link:
https://brainly.com/question/1370699
A solution of the primary standard potassium hydrogen phthalate (KHP), KHC8H4O4 , was prepared by dissolving 0.4877 g of KHP in about 50 mL of water. Titration of the KHP solution with a KOH solution of unknown concentration required 38.91 mL to reach a phenolphthalein end point. What is the concentration of the KOH solution
Answer:
The concentration of KOH is 0.06137 M
Explanation:
Step 1: Data given
Molar mass of KHP = 204.22 g/mol
Mass of KHP = 0.4877 grams
Volume of water = 50 mL
Volume of KOH solution = 38.91 mL
Step 2: The balanced equation
C8H5KO4 + KOH ⇒ C8H4K2O4+ H2O
Step 3: Calculate number of moles of KHP
Moles = Mass / molar mass
Moles KHP = 0.4877 grams / 204.22 g/mol
Moles KHP = 0.002388 moles
Step 4: Calculate moles of KOH
For 1 mol KHP we need 1 mol KOH to produce 1 mol C8H4K2O4 and 1 mol H2O
For 0.002388 moles KHP we need 0.002388 moles KOH
Step 5: Calculate the concentration of KOH
Concentration = moles / volume
Concentration of KOH = 0.002388 moles / 0.03891 L
Concentration of KOH = 0.06137 M
The concentration of KOH is 0.06137 M
A 10.00 mL sample of ethanol is added to 250.0 mL of water in order to observe the freezing point depression of the water. Consider the possible errors in this experiment, and determine whether each would cause the freezing point of the water to increase, decrease, or remain the same compared with the expected results. The ethanol sample is left out for several minutes before being added to the water, allowing a Choose... significant amount to evaporate. Some of the water is splashed out of the container before the ethanol is added. Choose... Choose... Instead of starting the experiment with room temperature water, the experiment is started with cold water. It is discovered that the 10.00 g ethanol sample is actually 95% ethanol and 5% water. Choose... Choose... Some of the ethanol and water solution is spilled out of the container during temperature measurement
Answer:
b
Explanation:
Addition of a solute lowers the freezing point of a substance.
Let us recall that the addition of a solute to a solution lowers the freezing point of the pure solution. This is because, freezing point depression is a colligative property. It depends on the number of solute molecules present.
The following are possible errors in the experiment:
The ethanol sample is left out for several minutes before being added to the water allowing a significant amount to evaporate. This causes the freezing point of water to increase compared with the expected results.Some of the water is splashed out of the container before the ethanol is added. This causes the freezing point of water to increase compared with the expected results. It is discovered that the 10.00 g ethanol sample is actually 95% ethanol and 5% water. This causes the freezing point of water to decrease compared with the expected results.Some of the ethanol and water solution is spilled out of the container during temperature measurement. This causes the freezing point of water to remain the same compared with the expected results.Learn more about colligative properties:https://brainly.com/question/8073802
Sally has constructed a concentration cell to measure Ksp for MCln. She constructs the cell by adding 2 mL of 0.05 M M(NO3)n to one compartment of the microwell plate. She then makes a solution of MCln by adding KCl to M(NO3)n. She adds 7.903 mL of the resulting mixture to a second compartment of the microwell plate. Sally knows n = +2. She has already calculated [Mn+] in the prepared MCln solution using the Nernst equation. [Mn+] = 8.279 M
Required:
How many moles of [Cl-] must be dissolved in that compartment?
Answer:
0.1309 mol
Explanation:
From the given information:
The metal ion, two ions of [tex]M^{+}[/tex] reacted with Cl⁻ to form [tex]MCl_n[/tex] i.e. the compound formed is [tex]MCl_2[/tex].
The concentration of the metal ion formed [tex][M^+][/tex] = 8.279 M
The concentration of the chlorine ion formed [tex][Cl^-][/tex] = 2 × 8.279 M
= 16.558 M
∴
We know that:
[tex]\mathsf{Molarity = \dfrac{no \ of \ moles }{volume (mL)}}[/tex]
The number of moles of [tex][Cl^-][/tex] = [tex]16.558 \ mol.L^{-1} \times 7.903 \ mL \times \dfrac{1 \ L}{1000 \ mL}[/tex]
= 0.1309 mol
Is Water and kerosine a mixture
Answer:
No.Kerosene oil and water do not mix with each other and form two separate layers.
Answer:
No
Explanation:
They cannot be mixed together they will form upper and lower layer
(in the image)
What Is the noble gas configuration for strontium (atomic number = 38)? Given: He (atomic number = 2) Ne (atomic number = 10) Ar (atomic number = 18) Kr (atomic number = 36) B В A [Kr 45Kr 5
Answer:
[Kr] 5s²
Explanation:
From the question given above, the following data were obtained:
Atomic number of strontium (Sr) = 38
Electronic configuration =?
Next, we shall determine the electronic configuration of the noble gas element before strontium (Sr).
The noble gas element before strontium (Sr) is krypton (Kr). Thus, the electronic configuration of krypton (Kr) is given below:
Kr (36) => 1s² 2s²2p⁶ 3s²3p⁶ 3d¹⁰ 4s²4p⁶
Finally, we shall determine the electronic configuration of strontium (Sr). This can be obtained as follow:
Kr (36) => 1s² 2s²2p⁶ 3s²3p⁶ 3d¹⁰ 4s²4p⁶
Sr (38) =>?
Sr (38) => 1s² 2s²2p⁶ 3s²3p⁶ 3d¹⁰ 4s²4p⁶ 5s²
But
Kr (36) => 1s² 2s²2p⁶ 3s²3p⁶ 3d¹⁰ 4s²4p⁶
Therefore,
Sr (38) => [Kr] 5s²
You need to make an aqueous solution of 0.121 M magnesium acetate for an experiment in lab, using a 250 mL volumetric flask. How much solid magnesium acetate should you add
Answer:
4.27 g
Explanation:
Number of moles = concentration × volume
Concentration = 0.121 M
Volume = 250 mL
Number of moles = 0.121 M × 250/1000 L
Number of moles = 0.03 moles
Number of moles = mass/molar mass
Mass= Number of moles × molar mass
Mass= 0.03 moles × 142.394 g/mol
Mass = 4.27 g
Consider the Fischer ester synthesis of methyl benzoate from benzoic acid and methanol in the presence of sulfuric acid as a catalyst. A reaction was performed in which 3.3 g of benzoic acid was reacted with excess methanol to make 1.7 g of methyl benzoate. Calculate the theoretical yield and percent yield for this reaction.
Answer:
46.2%
Explanation:
Number of moles benzoic acid reacts = 3.3g/122.12 g/mol = 0.027 moles
Since the reaction is 1:1, 0.027 moles of methyl benzoate is formed.
Hence;
Theoretical yield of methyl benzoate = 0.027 moles × 136.15 g/mol = 3.68 g
% yield = actual yield/theoretical yield × 100
% yield = 1.7 g/3.68 g × 100
% yield = 46.2%
Not following hazardous material safety policies and procedures can result in which of
the following? (Select all that apply.)
a. Serious illnesses
b. Injury
c. Death
d. HIPAA violation
Answer:
A, B, C and D
Explanation:
It can result for all of the choices mentioned.
Not following safety and procedure for handling hazardous material results in illness, death, injury, and HIPAA violation. Thus, all options are correct.
The hazardous material safety policy and measures are the standards set by HIPAA for the safety and precautionary measures that have been followed for reducing personal risk.
The hazardous materials have been chemicals, gases, flammables, and explosives. The inappropriate handling and not following the standard procedure results in illness, injury, death, and HIPAA violation. Thus, all the options are correct.
For more information about the hazardous material, refer to the link:
https://brainly.com/question/3520802
The "Nutrition Facts" on a label of a 16 fluid ounce container of apple juice states that a serving size is 8 fluid ounces contains 176 Calories and 240 milligrams of potassium.
Nutrition Facts
Serving Size 8 fl. oz. (240mL)
Servings Per Container: 2
Amount Per Serving
Calories 176
% Daily Value*
Total Fat 0g 0 %
Sodium 32mg 1 %
Potassium 240mg 6 %
Total Carbohydrate 29g 10 %
Sugars 26g
Protein 0g
a) How many calories would 1 fluid ounce of apple juice contain?
b) How many milligrams of potassium would 1 fluid ounce of apple juice contain?
Answer:
a) 22 calories
b) 30 mg
Explanation:
Divide number of cal or mg of pot by 8 fl oz.
At constant temperature and pressure, if 0.4 mole of a gas. A occupies 220 ml, and x mole of B gas occupies 120 ml. what is the number of moles of gas B?
Answer:
0.218mol
Explanation:
Using Avogadro's law equation;
Va/na = Vb/nb
Where;
Va = volume of gas A
Vb = volume of gas B
na = number of moles of gas A
nb = number of moles of gas B
According to the information in this question,
na = 0.4mol
nb = x mol
Va = 220ml
Vb = 120ml
Using Va/na = Vb/nb
220/0.4 = 120/x
Cross multiply
0.4 × 120 = 220 × x
48 = 220x
x = 48/220
x = 0.218mol
What is the volume of 6 moles of hydrogen gas, H2 (g)
Answer:
Molar volume, or volume of one mole of gas , depends on pressure and temperature, and is 22.4 liters - at 0 °C (273.15 K) and 1 atm (101325 Pa), or STP (Standard Temperature and Pressure), for every gas which behaves similarly to an ideal gas. The ideal gas molar volume increases to 24.0 liters as the temperature increases to 20 °C (at 1 atm).
Which redox reaction would most likely occur if silver and copper metal were added to a solution that contained silver and copper ions?
A. Cu + Agt Cu2+ + 2Ag
B. Cu2+ + 2Ag* → Cu + 2Ag
C. Cu2+ + 2Ag → Cu + 2Ag+
D. Cu + 2Ag Cu²+ + 2Ag+
give the wrong answer and I'm reporting
Answer:
B
Explanation:
b/c copper is readuction agent
The most likely redox reaction that would occur if silver and copper metal were added to a solution that contained silver and copper ions is [tex]\rm Cu^{2+} + 2Ag \rightarrow Cu + 2Ag^+[/tex]. The correct answer is option C.
Redox reaction is a reaction in which reduction and oxidation takes place simultaneously.
In this reaction:
[tex]\rm Cu^{2+} + 2Ag \rightarrow Cu + 2Ag^+[/tex]
Copper metal has a higher reduction potential than silver metal, which means that it will be oxidized to [tex]\rm Cu^{2+}[/tex] ions before silver metal is oxidized to [tex]\rm Ag^+[/tex] ions.
The [tex]\rm Cu^{2+}[/tex] ions in the solution will then react with the silver metal to form [tex]\rm Ag^+[/tex] ions and Copper metal. This reaction is an example of a displacement reaction, where a more reactive metal removes a less reactive metal from its compound.
Therefore, option C. [tex]\rm Cu^{2+} + 2Ag \rightarrow Cu + 2Ag^+[/tex] is the correct answer.
Learn more about Redox reaction here:
https://brainly.com/question/28300253
#SPJ5
What is the minimum pressure in kPa that must be applied at 25 °C to obtain pure water by reverse osmosis from water that is 0.690 M in sodium chloride and 0.08 M in zinc sulfate? Assume complete dissociation for electrolytes.
Answer:
1. Water purification method by reverse osmosis – membrane filtration
2. Method of purifying pure water by filter
3. Demineralization by ion exchange method
3. Demineralization by ion exchange method
Explanation:
As discussed in class, the Fischer esterification reactants and products are at equilibrium. How was the equilibrium of the reaction that you performed shifted towards the products
Answer:
See explanation
Explanation:
The particular reactants in the Fischer esterification reaction were not stated.
Generally, a Fischer esterification is a reaction that proceeds as follows;
RCOOH + R'OH ⇄RCOOR' + H2O
This reaction occurs in the presence of an acid catalyst.
We can shift the equilibrium of this reaction towards the products side in two ways;
I) use of a large excess of either of the reactants
ii) removal of one of the products as it is formed.
Any of these methods shifts the equilibrium of the Fischer esterification reaction towards the products side.
how many electrons does tin have?
A. 50
B. 68
C. 118
how many electrons does tin have?
Answer : 2, 8, 18, 18, 4
Therefore, total electrons = 50
A) Draw a conclusion about the relationship between enzyme activity and reaction temperature.
B) Provide an explanation for why we see a flattening of the curve for the 75 degree reaction after 3 minutes.
Answer:
Direct relationship.
Explanation:
There is direct relationship between enzyme activity and temperature of reaction. Direct relationship means if one factor is increases the other factor is also increase and vice versa. In chemical reactions, the rate of an enzyme action increases as the temperature of the chemical reaction also increases. we see a flattening of the curve for the 75 degree reaction after 3 minutes because the enzyme action is not working at that temperature or in other words, this temperature is not suitable for the enzyme activity.
