PLEASE HELP ASAP

Barney was a very inventive scientist and tried to perform the same experiments as those by famous scientists from long ago. One of the most challenging experiments was to roll out a very thin film of gold and put X-ray film in a circle around it. The difficult part was to get ahold of some radioactivity that he could shoot at the thin film for gold. One day, he ran into The Great Gazoo and told him his goal. The Great Gazoo said he had the perfect substance for him that was radioactive and should work. The element was named after him and had the symbol Gz. Barney quickly went back to his lab to run the experiment. What Barney noticed is that all the radioactive particles went through the gold film and none of them ricocheted back, but all went straight through the gold. Being puzzled, he quickly went to the lab to analyze this unknown radioactive substance. He found that the atomic number was 119, the mass number was 305. After a few more tests, Barney realized what was wrong with Gz. Your task is to figure out what was wrong with Gz by answering the following questions:
Whose experiment was Barney trying to imitate?
Where would Gz be located on Earth’s periodic table, column and row?
Give as many details on Gz that you could predict based on its location on the periodic table: type of chemical (metal, metalloid, or nonmetal), reactivity, ionization energy, electronegativity, and size of element.
What would the elements electron configuration end in?
Why did all the radioactive particles go straight through the gold film?
What would the daughter product be for Gz? Give all details for the atomic number, mass number, number of protons, neutrons and electrons.
If Gz had worked correctly, like Barney intended, what type of decay should Gz have had?
If Gz had worked correctly, what would the daughter product be? Give all details for the atomic number, mass number, number of protons, neutrons and electrons.
If Gz had worked correctly, what element would it become?

Explanation:

i don't understood your question ⁉️

and what do u mean by my color is sickle

Answer:

There are 24*60 minutes in a day (ignoring the imperfections of the natural world, the Earth and Sun). So there are 24*60 valid 24 hour times (excluding seconds) on a digital clock.

A measure of time representing the interval between consecutive passages of the Sun across the meridian, averaged over one year. 1 day = 24 hr (86,400 sec) and 60 minutes.

hope it helps ya mate! :-P

Answer:

migraine

Explanation:

d

Answer:

56.7g

Explanation:

Density = mass/volume

According to this question, some lead (Pb) of certain weights was obtained on a fishing trip. The density of lead is given as 11.34g/mL. If the 50 weights are placed in a 250. mL box, the mass of the lead are as follows:

Density = mass ÷ volume

11.34g/mL = mass/250mL

mass = 250 × 11.34

mass = 2835g

Since the 50 weight of lead weighs 2835g, then the mass of each weight is calculated as follows:

= 2835/50

= 56.7g

Answer:

1.43 M

Explanation:

We'll begin by calculating the number of mole of the solid. This can be obtained as follow:

Mass of solid = 8.60 g

Molar mass of solid = 21.50 g/mol

Mole of solid =?

Mole = mass / molar mass

Mole of solid = 8.60 / 21.50

Mole of solid = 0.4 mole

Next, we shall convert 280 mL to litre (L). This can be obtained as follow:

1000 mL = 1 L

Therefore,

280 mL = 280 mL × 1 L / 1000 mL

280 mL = 0.28 L

Thus, 280 mL is equivalent to 0.28 L.

Finally, we shall determine the molarity of the solution. This can be obtained as illustrated below:

Mole of solid = 0.4 mole

Volume = 0.28 L

Molarity =?

Molarity = mole / Volume

Molarity = 0.4 / 0.28

Molarity = 1.43 M

Thus, the molarity of the solution is 1.43 M.

Answer:

i cant understand what you wrote

Explanation:

it's a blank screen

Answer:

tác dụng với acid,

Explanation:

Answer:

1. Organic Alcohol

2. Ester (specifically acetate ester)

3. Organic Alcohol

4. Carboxylic acid

5. Ketone

6. Ether

7. Amine

Explanation:

You can tell what type it is both from the nomenclature and looking at the functional group on the molecular structure. Hope this helps!

The atomic number is the number of protons in the nucleus of an atom. The number of protons define the identity of an element (i.e., an element with 6 protons is a carbon atom, no matter how many neutrons may be present).

Answer:

i is the correct answer.

Explanation:

the RAM of aluminum is indeed 27. And since the RAM of substances are measured in terms of the C-12 isotope then R indeed explains why the RAM Al is 27.

Answer:

if you have options please include them, but I'll give you an idea.

Explanation:

The existence of ions happens when atoms lose or gain electrons.

if an atom gains an electron it will become a negative ion (because electrons are negative, and you gained more negativity.)

if an atom loses an electron it will become a positive ion (because it has lost negativity, which is the electron that we've lost).

I hope it helps, if it does please mark me brainliest!

Answer:

Philippines, island country of Southeast Asia in the western Pacific Ocean. It is an archipelago consisting of more than 7,000 islands and islets lying about 500 miles (800 km) off the coast of Vietnam. Manila is the capital, but nearby Quezon City is the country's most-populous city.

Answer: In ionic bonding (a noble gas configuration is formed for each element or ion).

Explanation:

IONIC bonding, which is also called electrovalent bonding involves the complete transfer of electrons from one atom to another in order to attain a noble gas electron configuration.

The noble gases or group 0 elements have a completely filled outermost shell of eight electrons. This makes them generally very stable, that is, unreactive. There is a natural drive for other atoms to attain the electron configuration of group 0 (inert gases) elements. This usually results in atoms entering into chemical combinations by losing, gaining or sharing electrons.

Ionia compound such as sodium chloride

--> have high melting points because alot of heat energy is required to break the attractive forces between the ions;

--> are hard and brittle;

--> are soluble in water;

--> conduct electricity when in solution or molten form because the ions are able to move about, that is, they are electrolytes

The Sun radiates sunlight (visible)  photons

Photons from the Sun strike Earth and become infrared photons.

Earth radiates infrared photons into the atmosphere

CO2 in the atmosphere absorbs infrared  photons.

CO2 in the atmosphere emits infrared photons back toward Earth.

Certain gases are known to contribute towards global warming. Such gases are called greenhouse gases. The infrared rays from the sun are absorbed by these gases as they are re-emitted from the earth and re-emitted.

The sun radiates photons to the earth which is re-radiated into outerspace from the earth's surface. CO2 and other greenhouse gases absorbs these gases and re-emit them to the earth thereby causing a gradually rise in the temperature of the earth called global warming.

https://brainly.com/question/16148572

Answer:

it's B

Explanation:

Climbing plants require an external support to grow vertically and enhance light acquisition. Vines that find a suitable support have greater performance and fitness than those that remain prostrate. Therefore, the location of a suitable support is a key process in the life history of climbing plants

Answer:

Movement of water from the area of high concentration of solute to the area of low concentration of solute.

Explanation:

Diffusion can be defined as the movement of gas molecules from a region of high concentration to a region of lower concentration until an equilibrium is attained or reached. This mixing of gas molecules in the liquid or gaseous state is due to their kinetic energy of random motion i.e without requiring bulk motion.

This ultimately implies that, diffusion is a phenomenon through which gas molecules in either a gaseous or liquid state spread out in response to a concentration gradient, which is simply the difference in concentration of the gases across a space.

During diffusion, molecules move from areas of high concentration to areas of low concentration. Also, diffusion does not require energy to move molecules.

Hence, the process of diffusion can be described as movement of water from the area of high concentration of solute to the area of low concentration of solute.

A solute can be defined as a substance that is typically dissolved in a liquid solvent such as water, coffee, tea, etc., to produce a solution.

Answer:

It is right or wrong I cannot say if it is wrong forgive me.

Answer:

The energy in the system will likely be exchanged, but the matter will not be exchanged.

Explanation:

According to the first law of thermodynamics, also known as Law of Conservation of Energy, energy can neither be created nor destroyed; energy can only be transferred or changed from one form to another. The law of conservation of mass also states that for any system closed to all transfers of matter and energy, the mass of the system must remain constant over time, as the system's mass cannot change.

The first shell can only hold 2 electrons, but the pupil placed in 8 electrons.

The second shell can hold up to 8 electrons, but the pupil only placed in 2 electrons.

Flourine only has 9 total electrons, yet there are 10 electrons in the diagram.

Answer:

Explanation:

In the Fluorine atom there are 2 electrons in the innermost shell and 7 i the outer shell.

Answer:

It's nitrogen

Explanation:

cuz it has valence 3 and  a diatomic gas at room temperature

Element X must be nitrogen.

The general formula AlX indicates that aluminum (Al) is reacting with a nonmetallic element represented by X to form a compound.

Since the compound AlX is said to be a diatomic gas at room temperature, it aligns with nitrogen (N2), which is a diatomic gas and a nonmetal.

Among the given options, nitrogen is the diatomic gas that best fits this description.

More on nitrogen can be found here: https://brainly.com/question/16711904

#SPJ3

Answer: Answer to #1 is 3A and ns2np1

Answer to #2 is 4A and ns2np2

Explanation:Group number is the number of valance electrons and generic outer electron configuration has to add up to equal the number of valance electrons

The element in the first diagram is in group 13 while the element in the second diagram is in group 14.

The Lewis structure of an atom of an element is a representation of the number of valence electrons on the outermost shell of the atom of that element. Every group of elements have a generic electron configuration which represents the number of valence electrons contained by atoms of elements in that group.

In the first diagram, the element X belongs to group 3A(13) and has a generic outer electron configuration, ns2np1. In the second diagram, the element X is in group 4A(14) and has outer electron configuration ns2np2.

Learn more: https://brainly.com/question/4147359

Answer:

0.01

Explanation:

volume of 22.4 L (22,400 ml) at s.t.p. 250 ml out of 22,400 ml is 0.01 rounded, therefore I assume that is the answer. About 0.01 mole occupies 250 cm3 at s.t.p.

Answer:

Mass of ascorbic acid in the pill = 7.152 x 176.1/1000 = 1.26 g

Explanation:  

The mass of ascorbic acid in the pill would be,  

1.26 g  

Now,  

Moles of ascorbic acid = Moles of NaOH = 0.447 M x 16 ml = 7.152 mmol  

Mass of ascorbic acid in the pill = 7.152 x 176.1/1000 = 1.26 g

Explanation:

a chemical reaction in which the rate of reaction is proportional to the concentration of each of three reacting molecules

Answer:

Distance from the sea, ocean currents, direction of prevailing winds, shape of the land, latitude, temperature, air pressure and  distance from the equator.

Explanation:

Distance from the sea, ocean currents, direction of prevailing winds, shape of the land, latitude, temperature, air pressure and  distance from the equator are the factors that influence the climates of any region. These factors has a great impact on the climate of a region, those regions which are nearer to the equator experiences hot climate whereas those regions which are far from the equator having cold climatic conditions.

Answer:

The motion towards or away from us based on the Doppler effect and corresponding red shift or blue shift.

Explanation:

The emission and absorption spectra demonstrates the lines where light has been absorbed by the atoms. The spikes can be observed due to atoms releasing photons at those wavelengths. Infrared and ultra violet waves can be observed during spectroscopy.

Answer:

all of this

Explanation:

here's the answer to your question

The relative mass of the magnesium oxide (MgO) is equal to 40 g. The percentage by mass of magnesium in MgO is 60 %.

The mass percentage of any element in a particular compound can be calculated from the number of parts by mass of the element in 100 parts by mass of a given compound.

Calculate the molar mass of the given compound by adding the atomic masses of the present elements. Then, the percentage of each element can be determined by dividing the total mass of the element by the molar mass of the compound multiplied by 100.

Given, the molecular formula of magnesium oxide is MgO. The atomic mass of Mg and O is 24 g and 16 g respectively.

The relative formula mass of the MgO = 40 g/mol

The mass percentage of the Mg = (24/40) × 100 = 60 %

Therefore, the mass percentage of the Mg in MgO is equal to 60 %.

Learn more about  the mass percentage, here:

brainly.com/question/16750428

#SPJ2

Answer:

weight of salt = 90 gram,

solubility = 50

sing formula

solubility of solute =

weightofsolventinsaturatedsolution

weightofsoluteinsaturatedsolution

×100

or 50=

weightofsolventinsaturatedsolutio

90gm

×100

so weight of solvent in saturated solution =

50

90gm

×100=180gm

Hence 180 gm of water is required to prepare a saturated solution.

The correct option is D. 2) Anti-bonding electrons or lone pairs. These lone pairs, and bonds helps to form the shape which keeps these electrons separate as possible.