please help im taking my final right now i can’t do this

the statement “Zero is included in the range of the relation” is correct and the statement “5 is included in the domain of this relation” is also correct.

if we observe the given ordered pairs we can easily determine that,The domain is the set of all x-values from the ordered pairs in the relation.

So, the domain of the given relation is {−4,0,5} because we have only three unique x-values from the given ordered pairs.

The range is the set of all y-values from the ordered pairs in the relation.

So, the range of the given relation is {−7,−3,2,6} because we have four unique y-values from the given ordered pairs.

Also, we can conclude that the given relation is not a function since we have the same x-value (5) corresponding to two different y-values (−3,2).

And it is true that the zero is included in the range of the relation since we have the ordered pair (0,6) which gives the y-value of 6.

So, the statement “The given relation is a function” is incorrect. But the statement “Zero is included in the range of the relation” is correct and the statement “5 is included in the domain of this relation” is also correct.

For more questions on  ordered pairs

https://brainly.com/question/30241799

#SPJ8

Based on the Pythagorean theorem, in a right triangle, the sum of the squares of the two shorter sides is equal to the square of the longest side. So, we can use this to find the possible values of the third side of the triangle.

The two given sides are 15 cm and 17 cm. We can label the unknown side as "x". Then, we can set up an equation:

15^2 + 17^2 = x^2

Simplifying this equation, we get:

225 + 289 = x^2

514 = x^2

x = sqrt(514)

Therefore, the possible value of the third side that would make it a right triangle is approximately 22.72 cm.

The fraction represented by point A, it is crucial to have information about the scale, intervals, and the relative position of point A on the number line.

With these details, you can calculate the fraction accurately.

Point A on the number line represents a fraction that requires additional information to determine its precise value.

I can provide you with a general approach to finding the fraction corresponding to a given point on the number line.

A number line represents a range of values, typically with a specific scale or interval.

The scale can be divided into equal parts, such as units or fractions.

To determine the fraction represented by point A, we need to know the scale and the position of point A relative to that scale.

Let's consider a number line that ranges from 0 to 1, with evenly spaced tick marks representing tenths.

If point A is located halfway between the tick marks representing 0.4 and 0.5, then it represents the fraction 0.45 (or 9/20 in simplified form).

If the number line has a different scale or is divided into different intervals, the fraction represented by point A will be different.

Without specific details about the number line and the position of point A, it is impossible to determine the fraction precisely.

For similar questions on fraction

https://brainly.com/question/78672

#SPJ8

To find the value of y, we can use the fact that opposite sides of a parallelogram are equal in length. Therefore, we can set up the following equations:

10 = 10 + 2x

2y + 4 = 18

Simplifying the first equation, we get:

2x = 0

Solving for x, we get:

x = 0

Substituting x = 0 into the second equation, we get:

2y + 4 = 18

Simplifying this equation, we get:

2y = 14

Dividing both sides by 2, we get:

y = 7

Therefore, the value of y is 7.

Therefore, the solutions to the equation 0 = |3x + 3| + 3 are x = -2 and x = 0.

To solve the equation 0 = |3x + 3| + 3, we need to eliminate the absolute value. Remember that the absolute value of a number is always non-negative.

First, let's isolate the absolute value term on one side of the equation:

|3x + 3| = -3

Since the absolute value cannot be negative, there are no solutions to the equation as it stands. However, if we modify the equation to make the right side positive, we can find a solution.

To eliminate the absolute value, we can rewrite the equation as two separate equations, considering both the positive and negative cases:

   3x + 3 = -3

   -(3x + 3) = -3

Solving equation 1:

3x + 3 = -3

3x = -6

x = -2

Solving equation 2:

-(3x + 3) = -3

-3x - 3 = -3

-3x = 0

x = 0

For such more question on equation

https://brainly.com/question/29174899

#SPJ8

[tex]\begin{array}{llll} \textit{using the pythagorean theorem} \\\\ a^2+o^2=c^2\implies a=\sqrt{c^2 - o^2} \end{array} \qquad \begin{cases} c=\stackrel{hypotenuse}{18}\\ a=\stackrel{adjacent}{x}\\ o=\stackrel{opposite}{12} \end{cases} \\\\\\ x=\sqrt{ 18^2 - 12^2}\implies x=\sqrt{ 324 - 144 } \implies x=\sqrt{ 180 }\implies x\approx 13.4[/tex]

The missing side of a right-angled triangle, assuming it to be the hypotenuse with other sides as 12 and 18, can be calculated using the Pythagorean theorem. The square root of the sum of 12^2 and 18^2 gives the length of the hypotenuse, which is approximately 21.6 when rounded to the nearest tenth.

This question relates to the Pythagorean theorem which states that in a right-angled triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides. This can be written as: a² + b² = c².

Assuming that the missing side in your question (x) is the hypotenuse and the other two sides are 12 and 18, you can calculate it using the aforementioned theorem. Therefore, you find x by calculating the square root of (12² + 18²), or √(144 + 324) which equals to √468. This value, rounded to the nearest tenth, is 21.6.

https://brainly.com/question/19649203

#SPJ2

The lines c and d are not parallel.

The correct answer is A. No, because 26 and 21 are not congruent.

In order for two lines to be parallel, the corresponding angles formed by a transversal should be congruent. However, in this case, angles 26 and 21 are not congruent, as indicated by their different measures of 40° and 140°, respectively.

Therefore, we can conclude that lines c and d are not parallel. The congruence of angles 22 and 23, mentioned in option B, or the congruence of angles 22 and 26, mentioned in option D, does not provide sufficient information to determine the parallelism of lines c and d.

The key factor in determining parallel lines is the congruence of corresponding angles, which is not met in this scenario.

For more such answers on Parallel lines

https://brainly.com/question/30195834

#SPJ8

Answer: All of the choices in the response would be correct.

Step-by-step explanation:

To obtain the graph of h(x) = -2x - 4, start with the graph of y = x. Stretch vertically by multiplying each x-coordinate by 2. Then reflect it across the x-axis and shift it down by 4 units

From the question, we have the following parameters that can be used in our computation:

h(x) = -2x - 4

The parent function is

f(x) = x

First, stretch vertically by a factor of 2

So, we have

f'(x) = 2x

Next, we reflect across the x-axis

So, we have

f''(x) = -2x

Lastly, we shift down by 4 units

So, we have

h(x) = -2x - 4

The graph is attached

Read more about transformation at

https://brainly.com/question/27224272

#SPJ1

True because corresponding sides and angles of the triangles are congrent.

The calculated measure of the angle D is (c) 32 degrees

From the question, we have the following parameters that can be used in our computation:

The triangles ABC and DEF

The triangles are similar triangles

This means that the corresponding angles are equal

Given that

A = 32 degrees

And the corresponding angle is D

We have

D = 32 degrees

Hence, the measure of the angle is (c) 32 degrees

Read more about angles at

https://brainly.com/question/31898235

#SPJ1

Based on the given scale, if Houston and Dallas are 1.6 centimeters apart on the map, the estimated distance between the two cities is approximately 242.1 miles.

To determine the distance between Houston, TX and Dallas, TX using the given scale, we can set up a proportion using the distances on the map and the actual distances.

Let's denote the distance between Houston and Dallas as "x" (in miles).

According to the scale provided, 2.3 centimeters on the map represents a distance of 348 miles. This can be expressed as:

2.3 cm / 348 miles = 1.6 cm / x miles

To find the value of "x," we can cross-multiply and solve the equation:

(2.3 cm) * (x miles) = (1.6 cm) * (348 miles)

2.3x = 556.8

Divide both sides by 2.3 to isolate "x":

x = 556.8 / 2.3

x ≈ 242.0869565

Therefore, based on the given scale, if Houston and Dallas are 1.6 centimeters apart on the map, the estimated distance between the two cities is approximately 242.1 miles.

Please note that this is an approximation based on the given scale and the assumption that the scale is linear and consistent throughout the map. Actual distances may vary and should be verified using more accurate measurements or reliable sources.

For more such questions on scale visit:

https://brainly.com/question/29967135

#SPJ8

The inverse of the function [tex]y = x^2 + 4x + 4 is f^(-1)(x) = -2 ± √(x - 2).[/tex]C

is correct answer

To find the inverse of the function y = x^2 + 4x + 4, we can follow the steps for finding the inverse of a function:

Step 1: Replace y with x and x with y:

[tex]x = y^2 + 4y + 4[/tex]

Step 2: Solve the equation for y:

[tex]x = y^2 + 4y + 4[/tex]

Step 3: Rearrange the equation:

[tex]y^2 + 4y + 4 - x = 0[/tex]

Step 4: Solve the quadratic equation for y using factoring or the quadratic formula. In this case, the equation can be factored:

[tex](y + 2)(y + 2) - x = 0(y + 2)^2 - x = 0[/tex]

Step 5: Expand and rearrange the equation:

[tex]y^2 + 4y + 4 - x = 0y^2 + 4y = x - 4y^2 + 4y = x - 2^2y^2 + 4y = (x - 2^2)[/tex]

Step 6: Complete the square on the left side of the equation:

[tex](y^2 + 4y + 4) = (x - 2^2) + 4(y + 2)^2 = (x - 2)[/tex]

Step 7: Take the square root of both sides:

[tex]y + 2 = ±√(x - 2)[/tex]

Step 8: Solve for y:

[tex]y = -2 ± √(x - 2)[/tex]

The inverse function of y = x^2 + 4x + 4 is given by:

[tex]f^(-1)(x) = -2 ± √(x - 2)[/tex]

Therefore, the inverse of the function y = [tex]x^2 + 4x + 4 is f^(-1)(x) = -2 ± √(x - 2).[/tex]

for more such question on inverse  visit

https://brainly.com/question/3831584

#SPJ8

Answer: B

Step-by-step explanation: Hope this helps:)

The number of vans, small truck and large truck they can buy is 130, 65 and 65 respectively.

Total cost of vehicles = $10 million

Total number of vehicles = 260

Cost of each commercial van = $25,000

Cost of each small truck = $50,000

Cost of each large truck = $50,000

Let

c = commercial van

s = small truck

l = large truck

v = 2s

s = l

So,

v + s + l = 260

2s + s + s = 260

4s = 260

divide both sides by 4

s = 260/4

s = 65

Therefore,

v = 2s

= 2(65)

= 130

s = l

l = 65

Read more on equation:

https://brainly.com/question/29174899

#SPJ1

700 divided by 3.14 is approximately 2.23.

To divide a whole number by a decimal without using a calculator, you can follow these steps:

Convert the decimal divisor into a whole number by multiplying both the numerator and denominator by a power of 10 that eliminates the decimal. In this case, we have 3.14, so we can multiply it by 100 to get 314 as the new divisor.

700 ÷ (3.14 × 100)

Perform the division using the converted divisor. Divide 700 by 314:

700 ÷ 314 = 2.229...

Round the result to the desired number of decimal places, if necessary. Since the question does not specify the level of precision required, we will round the result to two decimal places:

2.229... ≈ 2.23

Therefore, 700 divided by 3.14 is approximately 2.23.

for such more question on decimal

https://brainly.com/question/28280312

#SPJ8

The trapezoid ABCD have the measure of angles m∠A and m∠B equal to 79° and 66° respectively.

The sum of the interior angles of a quadrilateral is equal to 360°, so the sum of angles, m∠A, m∠B, m∠C, and m∠D is equal to 360°.

2x - 19 + x + 17 + 3x + 7 + 2x - 37 = 360°

8x - 32 = 360°

8x = 360° + 32°

8x = 392

x = 392/8 {divide through by 8}

x = 49

m∠A = 2(49) - 19 = 79°

m∠A = 49 + 17 = 66°

Therefore, the trapezoid ABCD have the measure of angles m∠A and m∠B equal to 79° and 66° respectively.

Read more about angles here: https://brainly.com/question/30179943

#SPJ1

Hello!

Answer:

11/12

Step-by-step explanation:

To solve this problem, we would need to find the denominator of the 2 numbers. In this case, it is 12. We will now convert the fractions to twelfths.

2/3 = 8/12

1/4 = 3/12

After we add 8/12 and 3/12, we get our answer 11/12.

The correct statement that describes the transformation of the graph of f(x) = x when considering g(x) = f(9x) is: "It is the graph of f(x) shrunk horizontally by a factor of 9."

To understand this transformation, let's analyze the function g(x) = f(9x). When we substitute x with 9x inside f(x), we effectively compress the graph horizontally.

Since the input x is multiplied by 9, the graph is squeezed horizontally by a factor of 9. This means that the x-values on the graph of g(x) are condensed compared to those on the graph of f(x).

It is important to note that the vertical scaling remains unchanged since the coefficient multiplying x remains 1 in both functions. Therefore, there is no vertical stretching or shrinking.

In summary, the graph of g(x) = f(9x) is the graph of f(x) shrunk horizontally by a factor of 9, while the vertical scaling remains unaffected.

For more such questions on shrunk horizontally

https://brainly.com/question/16484423

#SPJ8

The triangles EFG and WVU are similar by SSS

from the question, we have the following parameters that can be used in our computation:

Triangle EFG and WVU

The triangles in this figure are

EFG and WVU

These triangles are similar because:

The triangles do have similar corresponding sides

i.e. Ratio = 525/252 = 875/420 = 825/396

Evaluate

Ratio = 2.083 = 2.083 = 2.083

Hence, the triangles EFG and WVU are similar

Read more about similar triangles at

https://brainly.com/question/32215211

#SPJ1

The nearest tenth of a cubic foot, the volume of water remaining in Container A is approximately 138.2 cubic feet.

To find the volume of water remaining in Container A after it is completely filled and transferred to Container B, we need to calculate the difference in their volumes.

The volume of a cylinder can be calculated using the formula:

V = πr^2h

where V is the volume, r is the radius, and h is the height.

Container A:

Diameter = 10 feet

Radius (r) = 10/2 = 5 feet

Height (h) = 5 feet

Container B:

Diameter = 6 feet

Radius (r) = 6/2 = 3 feet

Height (h) = 9 feet

Now, let's calculate the volumes of both containers:

Volume of Container A = π(5^2)(5) = 125π cubic feet

Volume of Container B = π(3^2)(9) = 81π cubic feet

To find the volume of water remaining in Container A, we subtract the volume of Container B from the volume of Container A:

Volume remaining in Container A = Volume of Container A - Volume of Container B

= 125π - 81π

= 44π cubic feet

To get the volume to the nearest tenth of a cubic foot, we can use an approximation for the value of π, which is approximately 3.14:

Volume remaining in Container A ≈ 44(3.14) ≈ 138.16 cubic feet

Therefore, to the nearest tenth of a cubic foot, the volume of water remaining in Container A is approximately 138.2 cubic feet.

for such more question on volume

https://brainly.com/question/6204273

#SPJ8

Answer:

To stretch the spring from 36 cm to 56 cm, we need 6 J of work. Let's call the work needed to stretch the spring from 44 cm to 56 cm W1, and the work needed to stretch it from 36 cm to 44 cm W2.

Since the work needed is proportional to the distance the spring is stretched, we can write:

W1/W2 = (56-44)/(56-36)

Solving for W1, we get:

W1 = W2 * (56-44)/(56-36)

Substituting the values, we get:

W1 = 6 * (56-44)/(56-36) = 1.5 J

So, the work needed to stretch the spring from 44 cm to 52 cm is 1.5 J.

Now, let's move on to part (b).

The force required to stretch a spring is given by:

F = kx

where F is the force applied, x is the distance the spring is stretched beyond its natural length, and k is the spring constant.

We can rearrange this equation to solve for x:

x = F/k

We are given that a force of 25 N is applied to the spring. We need to find the distance the spring is stretched beyond its natural length. To do this, we need to know the spring constant.

Unfortunately, the problem does not give us the spring constant.

Without this information, we cannot solve for x.

Answer:

24 W

Step-by-step explanation:

The correct answer is D. No because 23 and 25 are not supplementary.

In the given diagram, it is stated that the measures of angles 23 and 27 are 45°, and the measure of angle 25 is 135°. To determine if lines C and D are parallel, we need to analyze the angles formed by these lines.

If the alternate interior angles or corresponding angles are congruent, then the lines are parallel. However, in this case, we don't have enough information about the angles formed by lines C and D to make that determination.

The fact that angle 23 and angle 27 are congruent (both measuring 45°) doesn't provide any information about the relationship between lines C and D. Similarly, the measure of angle 25 being 135° doesn't give us any insight into the parallelism of lines C and D. Therefore, we cannot conclude that lines C and D are parallel based on the given information, and the correct answer is D.

For more such answers on supplementary angle

https://brainly.com/question/12919120

#SPJ8

In the first row, the ordered pair can be expressed as f(8) = -6 in function notation.

Of(3) is 18.

Of(x) = -5 when x is -2.

The given table represents a function, and we need to express the values in function notation and determine specific inputs that correspond to certain outputs.

In the table's first row, the ordered pair are shown which can be expressed as function notation:

f(8) = -6

This means that when the input (x) is 8, the corresponding output (f(x)) is -6.

f(x) = -5 when x is -2.

This means that when the input (x) is -2, the value of the function (f(x)) is -5.

In the table, the function is defined by the equation f(x) = 8x - 6. Each input value (x) is multiplied by 8 and then subtracted by 6 to determine the corresponding output (f(x)).

By substituting different values for x into the function, we can find the corresponding values for f(x) in the table.

when x = 3, we have:

f(3) = 8(3) - 6

f(3) = 24 - 6

f(3) = 18

So, f(3) is 18.

Similarly, when x = -2, we have:

f(-2) = 8(-2) - 6

f(-2) = -16 - 6

f(-2) = -22

Thus, when x is -2, f(x) is -22.

Know more about ordered pair here:
https://brainly.com/question/11139505

#SPJ8

Among the 80 customers, 64 individuals choose to order drinks at the restaurant.

To find the number of people who order drinks at the restaurant, we can start by calculating the percentage of customers who do not order drinks.

Given that 20% of the customers do not order drinks, we can calculate the number of customers who do not order drinks by multiplying 80 (total customers) by 0.20 (20% expressed as a decimal):

Number of customers who do not order drinks = 80 * 0.20 = 16.

Since the total number of customers is 80, and 16 customers do not order drinks, we can subtract the number of customers who do not order drinks from the total number of customers to find the number of customers who do order drinks:

Number of customers who order drinks = 80 - 16 = 64.

Therefore, 64 people order drinks at the restaurant.

For more question on customers visit:

https://brainly.com/question/25726638

#SPJ8

To determine how long it will take to make 20 slices of toast with the given information, we can analyze the patterns and ratios observed in the data.

From the provided data, we can see that the time it takes to make toast is directly proportional to the number of slices. Specifically, as the number of slices doubles, the time doubles as well.

Using this pattern, we can calculate the estimated time it would take to make 20 slices.

Starting with the given information:

   35 seconds for 4 slices

   70 seconds for 8 slices

   105 seconds for 10 slices

Since the time doubles as the number of slices doubles, we can estimate that it would take approximately 140 seconds for 16 slices (double of 8 slices).

Now, doubling again, we can estimate that it would take approximately 280 seconds for 20 slices (double of 10 slices).

Therefore, it is estimated that it will take around 280 seconds to make 20 slices of toast.

For such more question on proportional

https://brainly.com/question/1496357

#SPJ8

Answer:4

Step-by-step explanation:1+1 is 2, so if you take 2+2 it is 4, same as 2×2 is 4.

Answer: C

Step-by-step explanation:

Point D is at -14 on the number line.

In Mathematics, the midpoint of a line segment with two end points can be calculated by adding each end point on a line segment together and then divide by two (2).

Since E is the midpoint of line segment CD, we can logically deduce the following relationship:

Line segment CD = Line segment C + Line segment D

Midpoint E = (point C + point D)/2

By substituting the given points into the equation above, we have the following:

-3 = (8 + D)/2

-6 = 8 + D

D = -6 - 8

D = -14

Read more on midpoint here: brainly.com/question/17918978

#SPJ2