Please help! Its worth 15 point things

A. The work done is 300 ft-lbs when a 100 lb rock is lifted to a height of 3 ft.

To calculate the work done, we can use the formula: Work = force x distance x cos(Ф).In this case, the force is the force of gravity acting on the rock, which can be calculated using the formula:

force = m * g

where m is the mass of the rock and g is the acceleration due to gravity (32.17 ft/s^2).

force = 100 lb * 32.17 ft/s^2 = 3,217 ft-lbs

The distance is the height to which the rock is lifted, which is 3 ft.

The angle of the rock to the vertical is 90 degrees, so cos(90) = 0.

So,

Work = force x distance x cos(theta) = 3,217 ft-lbs * 3 ft * 0 = 300 ft-lbs

So, the work done is 300 ft-lbs.

For more questions like Work done  click the link below:

https://brainly.com/question/13662169

#SPJ4

The mean and standard deviation of a discrete distribution can be found by calculating the sum of all the values in the distribution multiplied by their respective probabilities and then dividing the result by the total probability.

To calculate the standard deviation, the sum of the squares of the differences between the values and the mean has to be multiplied by the corresponding probabilities and divided by the total probability.

The square root of this outcome is then the standard deviation. The standard deviation is a measurement of the spread or dispersion of the data, whereas the mean of a discrete distribution is a measure of the central tendency of the data.

Learn more about mean visit:

https://brainly.com/question/1136789

#SPJ4

Answer:

x = -3

y = 5

Step-by-step explanation:

3x + 2y = 1

5x + 4y = 5 ​

First, we multiply the first equation by -2

-6x -4y = -2

5x + 4y = 5

-x = 3

x = -3

Now put -3 back in for x and solve for y

3(-3) + 2y = 1

-9 + 2y = 1

2y = 10

y = 5

Let's check

3(-3) + 2(5) = 1

-9 + 10 = 1

1 = 1

So,  x = -3 & y = 5 is the correct answer.

Answer:

48

Step-by-step explanation:

AB+CB=AC which is 18+30 which is 48

Answer:

C. 48

Step-by-step explanation:

This distance of AC is the same as the distance between BC plus the distance between AB. In other words: AB + BC = AC

AB = 18

BC = 30

30 + 18 = AC

AC = 48

Answer:

Below

Step-by-step explanation:

The answer can be found by   11/5 * 325

 here is how this comes about

    ratios

  325 is to 5 hours as 'd' is to 11 hours

325/5 = d/11     Multiply both sides by ' 11 '

11/5  * 325 = d     ( the equation above )

d = 715 miles

An x-y (or bivariate) plot is any graph or plot with two axes. The "x-axis" is typically the horizontal axis, whereas the "y-axis" is typically the vertical axis.

Your plot's axes should be identified, and the scale should be chosen (if the graph is not already labeled). Plot the first two pairs of numbers first (the top row of numbers).

Finding the number a on the horizontal, or x-, axis and tracing up or down from there while maintaining a parallel path to the vertical, or y-, axis, will allow you to draw the point at (a, b) on the Cartesian plane.

The position of the point is this area (a, b). The intersection of the two axes defines the plane's center. It is referred to as the beginning or point (0,0).

Each axis is further subdivided into equal units starting at the origin: rising, positive numbers on the x-axis and up the y-axis; falling, negative numbers on the x-axis and down the y-axis.

To know more about plot a point visit:

https://brainly.com/question/4619801

#SPJ4

A function argument is a value supplied to achieve the Range function's outcome. This is often alluded to as a latent variable.

This is an optional argument that determines the sequence's point of reference. The default assumption is 0.

A mathematical function includes one or much more arguments in the form of the independent variables that are specified in the definition and can also include parameters.

This is a necessary argument that determines the sequence's final chapter location.

This is an optional argument that specifies the adjustment between both sequence members. The default mode is 1.

A domain of the sum of two or multivalued argument values is considered to be the domain of a function with two or more variables.

A cyclical function's argument is angular. A hyperbolic perspective is the input of a hyper equation.

To know more about Range Function visit:

https://brainly.com/question/17440903

#SPJ4

The type of function always has an inverse is one to one.

In math function is referred as a relation from a set of inputs to a set of possible outputs where each input is related to exactly one output.

Here we need to identify the type of the function always has an inverse.

As we all know that in each and every function has an inverse, here we have also know that but not every inverse will be a function.

Where as the inverse may fail the vertical line test.

Here we have identified that if the original function is a one-to-one function then its inverse will be a function.

Finally in a one-to-one function not only passes the vertical line test, then it also passes a horizontal line test.

To know more about function here.

https://brainly.com/question/28193995

#SPJ4

Answer:18

Step-by-step explanation: Using the order of operations (PEMDAS), you would first perform any calculations inside of parentheses, then exponents, then multiplication and division from left to right, and finally, addition and subtraction from left to right.

9 + 15 / 5 x 3

= 9 + 3 x 3

= 9 + 9

= 18

So the answer would be 18.

When solving an inequality:

In arithmetic, an inequality is a relation that makes a non-equal assessment between two numbers or other mathematical expressions. it is used most usually to evaluate numbers on the range line by using their size.

In mathematics, a dating between two expressions or values that aren't identical to every other is called 'inequality. ' So, a loss of balance consequences in inequality. The three facets and three angles proportion an important relationship. In arithmetic, the term “inequality” represents the that means “not equal”. allow us to bear in mind a simple example if the expressions in the equations are not the same, we can say it is inequality.

Whilst two actual numbers or algebraic expressions are represented with symbols like <, > or ≤, ≥ they can be called an inequality. as an example, 3x<20, or 4x+y>12. which means Of The Symbols used in Inequalities: The image < manner 'less than' and ≤ means much less than or same to.

To learn more about Inequality visit here:

brainly.com/question/30228778

#SPJ4

The set of all the outputs of a function is known as the range of the function or after substituting the domain, the entire set of all values possible as outcomes of the dependent variable.

For e.g. the range of the function F is {1983, 1987, 1992, 1996}.

On the other hand, the whole set B is known as the codomain of the function.

It is the set that contains all the outputs of the function.

So, the set of real numbers is a codomain for every real-valued function. The codomain of the function F is set B.

How to Find the Range of a Function

Consider a function y = f(x).

The spread of all the y values from minimum to maximum is the range of the function.

In the given expression of y, substitute all the values of x to check whether it is positive, negative or equal to other values.

Find the minimum and maximum values for y.

Then draw a graph for the same.

To know more about Range of a Function visit brainly.com/question/21027387

#SPJ4

Answer:

30 tiles

Step-by-step explanation:

We know

First store

$0.59 per tile

Rent a tile saw for $18

Second store

1 tile = $1.19

We have the equation

0.59x + 18 = 1.19x

18 = 0.6x

x = 30 tiles

So, she must buy 30 tiles for the same cost at both stores.

Answer:

Margo must purchase 30 tiles for the cost to be the same at both stores.

Step-by-step explanation:

By analyzing the "real-world" problem, we can convert the words into two algebraic equations.

Store 1:

"$0.59 per tile and rent a tile saw for $18."

y = 0.59x + 18

y = the price of the tiles bought

0.59 = price of one tile

x = number of tiles

18 = the fixed cost of a saw

Store 2:

"At another store, she can borrow the tile saw for free if she buys tiles there for $1.19 per tile."

In this case, the saw is free. Thus, we don't need to add a price to the equation.

y = 1.19x

y = the price of the tiles bought

1.19 = price of one tile

x = number of tiles

Now that we have both equations, we can write down the equations that equate other. This formula will indicate that the equations would intersect at a certain point on the x and y values. Hence, this step will answer how many tiles are required for both stores to equal the same price.

[tex]0.59x+18=1.19x[/tex]

Now solve for x:

[tex]0.59x-0.59x+18=1.19x-0.59x\\\\18=0.6x\\\\\frac{18}{0.6} =\frac{0.6x}{0.6}\\\\30=x[/tex]

Margo can buy 30 tiles from both stores for the cost to be equal.

You might ask, "But what about the price?" This is where we solve for y; this variable will answer how much the tiles would cost at 30 tiles. So, we can take the answer for "x" and plug it into any of the two equations.

[tex]y=1.19x\\y=1.19(30)[/tex]

For this equation, all you have to do is multiply both numbers to get your answer.

[tex]y=35.7[/tex]

Therefore, Margo can buy 30 tiles for the cost to be same at both stores at $35.70.

The number of solutions to an equation x₁ + x₂ + x₃ + x₄ = 17 are 1140

Consider given equation x₁ + x₂ + x₃ + x₄  = 17,

where x₁ , x₂ , x₃ and x₄ are non-negative integers.

As we know x₁ is the number of ones before the first zero, x₂ the number of ones between the first and the second zero, x₃ the number of ones between the second and the third zero, and x₄ is the number of ones after the third zero.

This means, there is a 1-1 correspondence between the solutions and reorderings of 17 ones and 3 zeros.

So, the number of solutions to given equation would be,

n = ²⁰C₃

Using combination formula [tex]^nC_r=\frac{n!}{r!\times(n-r)!}[/tex],

²⁰C₃ = 20! / (3! × (20 - 3)!)

²⁰C₃ = 1140

So, n = 1140

The possible number of solutions = 1140

Learn more about an equation here:

brainly.com/question/649785

#SPJ4

The complete question is:

How many solutions are there to the equation x₁ + x₂ + x₃ + x₄ = 17 where x₁ , x₂ , x₃ and x₄  are nonnegative integers?.

Equations of degree one and having two variables are known as linear equations in two variables. It is of the form, ax +by +c = 0, where a, b and c are real numbers, and both a and b not equal to zero.

Equations of the form a x +b y = 0; where a and b are real numbers, and a ,b ≠ 0, is also linear equations in two variable.

Since the solution of linear equation in two variable is a pair of numbers (x,y), we can represent the solutions in a coordinate plane.

To draw graph , we need to find some points

y =-3x

for  y =-3x ,lets substitute value and check,

x=0

then y =0

x=1

then y =-3

x=2

then y =-6

x=3

then y =-9

x=-1

then y =3

To know more about Graphing of Linear Equation in Two Variables visit brainly.com/question/19950555

#SPJ4

Answer:

3.05yx - 6y

Step-by-step explanation:

​y(3.05x−3.75​)−2.25y

3.05yx -3.75y - 2.25y

3.05yx - 6y

Answer: [tex]16x^2-102x+77[/tex]

Step-by-step explanation:

1) distribute

[tex](-8x+7)(4x+2)\\-32x^2-16x+28x+14\\-32x^2+12x+14[/tex]

2) distribute

[tex](-8x+7)(6x-9)\\-48x^2+72x+42x-63\\-48x^2+114x-63[/tex]

3) solve

[tex](-32x^2+12x+14)-(-48x^2+114x-63)\\(-32x^2+12x+14)+(48x^2-114x+63)\\16x^2-102x+77[/tex]

For the given system of equations 4x – 9y = 7 , –2x + 3y = 4 answer of the following question are:

a. To eliminate x-terms we need to multiply 2 to the second equation and add it to the first equation.

b.  To eliminate y-terms we need to multiply 3 to the second equation and add it to the first equation.

As given in the question,

For the given system of equation,

4x – 9y = 7 ___(1)

–2x + 3y = 4  ___(2)

a. To eliminate x-terms multiply by 2 to the (2) equation and add it to (1)

 4x – 9y = 7

–4x + 6y = 8

-3y = 15

⇒ y = -5

b. To eliminate y-terms multiply by 3 to the (2) equation and add it to (1):

4x – 9y = 7

–6x + 9y = 12

-2x = 19

⇒x = -19/2

Therefore, for the given system of equations 4x – 9y = 7 , –2x + 3y = 4 :

a. To eliminate x-terms we need to multiply 2 to the second equation and add it to the first equation.

b.  To eliminate y-terms we need to multiply 3 to the second equation and add it to the first equation.

The above question is incomplete , the complete question is:

Use this system of equations to answer the questions that follow.

4x – 9y = 7 , –2x + 3y = 4

a. What number would you multiply the second equation by in order to eliminate the x-terms when adding to the first equation?

b. What number would you multiply the second equation by in order to eliminate the y-terms when adding to the first equation?

Learn more about system of equations here

brainly.com/question/12895249

#SPJ4

Since 1 and 3 are vertical angles, the graphic demonstrates that m1 = 90. They have identical measurements, therefore m3 = 90. 1 and 2 are additional.

A circle is formed when every point in the plane that is a specific distance apart from another point does so (center). Thus, it is a curve made up of points that are separated from one another by a set distance while moving in the plane. It is also rotationally symmetric about the center at all angles. A circle is a closed, two-dimensional object where each pair of points in the plane is equally separated from the "center." A specular symmetry line is made by drawing a line through the circle. It is also rotationally symmetric about the center at all angles.

given

when measured with a protractor, points to 100°, crossing 90°. As a result, the angle has a 100° measurement.

Since 1 and 3 are vertical angles, the graphic demonstrates that m1 = 90. They have identical measurements, therefore m3 = 90. 1 and 2 are additional.

To know more about circle visit:

https://brainly.com/question/29142813

#SPJ1

Answer:

8x+42=27

8x=-15

x=-1.875

Step-by-step explanation:

[tex]\huge\text{Hey there!}[/tex]

[tex]\frak{\text{A}ssuming. . .}[/tex]

[tex]\mathsf{4.8x = 2.4}[/tex]

[tex]\frak{\mathsf{DIVIDE}\ 4.8\ to\ both\ sides}[/tex]

[tex]\mathsf{\dfrac{4.8x}{4.8} = \dfrac{2.4}{4.8}}[/tex]

[tex]\frak{\mathsf{Simplify} \ it}[/tex]

[tex]\mathsf{x = \dfrac{2.4}{4.8}}[/tex]

[tex]\mathsf{x = 0.5}[/tex]

[tex]\huge\boxed{\frak{T}}\huge\textsf{herefore your answer should be:}}[/tex]

[tex]\huge\boxed{\mathsf{x = 0.5}}\huge\checkmark[/tex]

[tex]\huge\text{Good luck on your assignment \& enjoy your day!}[/tex]

The prime factorization of the number 21 is:

21 = 3*7

We want to write the prime factorization of 21.

To do so, we just need to divide the number by prime numbers.

The first prime number we can try is 2, if we divide by 2 we get:

21/2 = 10.5

This is not an integer, so 2 is not a factor.

The next one is 3:

21/3 = 7

Now we can rewrite:

21 = 3*7

Where 3 and 7 are prime numbers, so that is the prime factorization.

Learn more about prime factorizations:

https://brainly.com/question/1081523

#SPJ1

Answer:

193 minutes

Step-by-step explanation:

We know

Boris paid an $8 fee to start the scooter plus 6 cents per minute of the ride.

Let y represent the total cost and x represent the number of minutes we have the equation

y = 0.06x + 8

Now, put $19.58 in for y and solve

19.58 = 0.06x + 8

11.58 = 0.06x

x = 193 minutes

So, Boris rides the scooter for 193 minutes.

A quadratic equation has the generic form ax2 + bx + c = 0. Thus, the roots are hypothetical, meaning that they have two false roots.

The equation's nature of roots indicates whether it contains rational, irrational, or fictitious roots. Imaginary roots and unreal roots are synonyms.

Having just second-order terms, the quadratic form is a unique nonlinear function (either the square of a variable or the product of two variables).

2x2 - 3x + 5 = 0

a = 2 , b = -3, c = 5

b2 - 4ac = (- 3)2 - 4 (2) (5) (5)

= 9 - 40

= - 31

b2 - 4ac < 0

Therefore, the equation lacks any true roots.

To learn more about quadratic equation here:

https://brainly.com/question/30098550

#SPJ4

Full Question = Find the nature of the roots of the quadratic equations. If the real root exist, find them:

i) 2x2 - 3x + 5 = 0

A fraction share that Tiana share with her brother called half part. This because the part is split into two where the first part is called first half and other called as second half.

To name a piece of an object that split into several you have to:

Learn more about fraction of a set here

https://brainly.com/question/27723214

#SPJ4

Answer:

1.  Y = -1/4x + 1

3. Y = 2/5x + 1

5. Y = 4/5x + 5

7. Y = -x + 5

9. Y = -5/2x - 16

Step-by-step explanation:

Find the slope using the formula

Use the slope and one of the points to find the y-intercept

Once you know the value for m and the value for b, you can plug these into the slope-intercept form of a line (y = mx + b) to get the equation for the line.

log x is strictly increasing in interval (0, ∞).

In mathematics, the logarithmic function is an inverse function to exponentiation. The logarithmic function is defined as For x > 0 , a > 0, and a ≠1,y= loga x if and only if x = ay .Then the function is given by f(x) = loga x .The base of the logarithm is a. This can be read it as log base a of x. The most 2 common bases used in logarithmic functions are base 10 and base e

The given function is f(x)= logx.

f'(x)=derivative of f= 1/x.

clearly ,1/x>0

hence the function is strictly increasing.

To learn more about logarithms visit : brainly.com/question/30085872

#SPJ4

There are several ways to find the measure of an angle in a triangle, depending on the information given about the triangle and the angles. Some common methods include:

Using the angles in a triangle sum to 180 degrees: If you know the measures of two angles in a triangle, you can use the fact that the angles in a triangle sum to 180 degrees to find the measure of the third angle.

Using the Pythagorean theorem: If you have a right triangle, you can use the Pythagorean theorem to find the measure of the right angle (90 degrees)

Using the Law of Cosines: If you know the measures of two angles and the lengths of all three sides of a triangle, you can use the law of cosines to find the measure of the third angle.

Using trigonometry: If you know the lengths of two sides of a triangle and the measure of one angle, you can use trigonometry to find the measure of the other angles.

It is important to note that in order to find the measure of an angle you need to know at least one angle and the values of the sides of the triangle or two angles.

Answer:

cindy is 51

Step-by-step explanation:

70 divided by 2 is 45

45+ 6 is 51