Please help now ASAP lpleaseee helppp

Please Help Now ASAP Lpleaseee Helppp

Answers

Answer 1

Phosphorous at 18.9%. According to analysis, sodium, phosphorus, and oxygen make up 42.1%, 18.9%, and 39% of sodium phosphate, respectively.

What is the short definition of percentage composition?

The ratio of the amounts of each element to the sum of the individual element amounts present in the compound, multiplied by 100, is the definition of the percentage of a given compound. In this instance, the quantity is expressed in grams of the constituent ingredients.

What distinguishes mass percent from percent composition?

The proportional mass of each component of a compound is known as the percent composition. The mass percent of a compound is the weight of an element expressed as a share of the complex's overall mass. For instance, a molecule of water has a structure of one oxygen atom and two hydrogen atoms.

To know more about percentage composition visit:

https://brainly.com/question/11856940

#SPJ1


Related Questions

chemically, the three layers of the Earth's interior, stated in order from center to surface, are the(1)

Answers

The three layers of the Earth's interior, stated in order from center to surface, are the core, mantle and the crust.

What is Earth?

Earth is the planet we live on, one of eight planets in our solar system and the only known place in the universe to support life. Earth is the third planet from the sun, after Mercury and Venus and before Mars. It is about 150 million kilometers (about 93 million miles) from the sun. This distance, called an astronomical unit (AU), is a standard unit of measurement in astronomy. Earth is one AU from the sun.

The planet Jupiter is about 5.2 AU from the sun—about 778 million kilometers (483.5 million miles). Earth is the largest and most massive of the rocky inner planets, although it is dwarfed by the gas giants beyond the Asteroid Belt.

Learn more about earth,here:

https://brainly.com/question/12041467

#SPJ1

How many Br- ions are present in 1.00 moles of FeBr3? a. 1.81E24 b. 6.02E23 c. 6.02E25 d. 12.04E23

Answers

B) The number of Br- ions present in 1.00 moles of FeBr3 is 6.02E23.

To find the number of Br- ions present in 1.00 moles of FeBr3, we need to first determine the number of moles of Br- ions present in the compound. FeBr3 is a compound that contains 1 Br- ion per formula unit.

To find the number of moles, we can use the formula:

moles = number of atoms / Avogadro's number (6.02E23)

The number of moles of Br- ions in 1.00 moles of FeBr3 is:

1.00 moles x (1 Br- ion / 1 formula unit) = 1.00 moles

So, the number of Br- ions present in 1.00 moles of FeBr3 is 6.02E23 ions.

For more questions like Ions click the link below:

https://brainly.com/question/7621383

#SPJ4

What is hydropower development?.

Answers

Answer:

Hydropower technologies generate power by using the elevation difference, created by a dam or diversion structure, of water flowing in on one side and out, far below, on the other.

draw the structure of the organic product or products formed in the reaction.

Answers

H2C=CH-CH=CH-CH2-Mg-Br   + D2O------ H2C=CH-CH=CH-CH2-D   + DO- Mg-Br, H2C=CH-CH=CH-CH2-Mg- Br is Grignard reagent , it is highly polar in nature so it is highly reactive.

mecanism

H2C=CH-CH=CH-CH2-Mg- Br is Grignard reagent , it is highly polar in nature so it is highly reactive               .

H2C=CH-CH=CH -CH2-Mg-Br------ H2C=CH-CH=CH -CH2- + Mg+-Br

H2C=CH-CH=CH -CH2-  that intermediate show resonance so become more product.

H2C=CH-CH=CH -CH2-  <-----> H2C=CH-CH--CH=CH2 <-----> -CH2-CH=CH-CH=CH2

So two product possible

D2O----- OD- + D+

product1-    H2C=CH-CH=CH2 -CH2- + D+----      .H2C=CH-CH=CH-CH2-D major product

product2-   H2C=CH-CH--CH=CH2 +  D+-----   H2C=CH-CHD-CH=CH2

step-2 Mg+-Br + OD----- DO- Mg-Br

Learn more about organic product here:

https://brainly.com/question/27119170

#SPJ4

The complete question is:

draw the structure of the organic product or products formed in the reaction.

the questiojn is need answere please

Answers

The one case that the surroundings do work on the system is q = -17 KJ, w = + 58 kJ. The correct option is A.

What is work done in a system?

As work is negative, it indicates that the system is doing the work because when the system works, energy is expended and volume rises.

If the work is constructive, the system is being worked on because it is absorbing energy and its volume is decreasing.

Work = Force Distance is the formula for calculating work. The joule (J), sometimes known as the Newton meter (N m), is the SI unit for work.

Therefore, the correct option is A. q = -17 KJ, w = + 58 kJ.

To learn more about the work done, refer to the link:

https://brainly.com/question/8720615

#SPJ1

In an experiment searching for the photoelectric effect, an incident beam of green light produced no ejected electrons from a metal. In order to eject electrons, the experimenter should?
A. increase the brightness of the light.
B. try blue light.
C. try yellow light.
D. give up on that particular metal.
E. decrease the brightness of the light.

Answers

To remove electrons in the photoelectric experiment, experimenters must try blue light. (B)

Definition of Photoelectric

The photoelectric effect occurs when one of the metal plates is exposed to light, there is a current going to the other metal plate, as has been detected by the ammeter in the circuit above.

The ability of light to move electrons depends on its frequency. So if for example the light intensity is small but the frequency is large, the electrons will still be able to escape.

The energy that causes this movement of electrons is from the electromagnetic waves of light.

Learn more about photoelectricity at: brainly.com/question/26465043

#SPJ4

What is the major attractive force that exists among different I2 molecules in the solid? Select one: A. covalent-ionic interactions. B. Dispersion forces. C.

Answers

The claim that sense neurons' cell bodies are located in the grey commissure, an expanded region of the dorsal root.

Dorsal nerve roots provide sensory neural signals to the central nervous system from the peripheral nervous system. Anatomically, a dorsal root ganglion develops from the dorsal root of the spinal nerves. For the central nervous system to react, they transmit sensory data from multiple peripheral receptors. It is generally recognised that DRG has a role in chronic pain. The first description of anaesthesia infiltration of the DRG was made in 1949. It has been possible to target the DRG using the dorsal root entry zone (DREZ), a nearby related neural target, dorsal rhizotomy or gangliectomy, conventional radiofrequency denervation, pulsed radiofrequency, and steroid injection.

Learn more about Neurons' here:

https://brainly.com/question/29816540

#SPJ4

if the proton would not hit one of the plates, what would be the magnitude of its vertical displacement as it exits the region between the plates?

Answers

The magnitude of vertical displacement is 2.73×10−6m as it exits the region between the plates.

The electron narrowly escapes impacting the top plate as it travels between the charged plates and feels an upward pull.

Due to its slower acceleration and higher mass, the proton won't hit any plates.

To calculate the vertical displacement as the object exits the plates, we once more use the kinematic equations.

The electron feels a force upward as it passes between the charged plates and narrowly avoids striking the top plate. It just misses the to plate by a small amount as it moves higher.

The distance it travels in the y-direction is 0.005m.

Time of flight is t=0.0200m1.60×106ms−1 =1.25zz10−8s

the initial y-velocity is zero.

so, 0.005m=12a(1.25×10−8s)2

or, a=6.40×1013ms−2

But also a=Fm= eEme

E= (9.1×10−31kg)(6.40×1013ms−2)1.60×10−19C =364NC−1

The proton will accelerate less and miss the plates since it is more massive. We once more utilise the kinematic equation to determine the vertical displacement when it occurs for the plates.

y=12at2=12eEmp(1.25×10−8s) =2.73×10−6m

The proton won't collide with a plate because, despite the fact that the electric force felt by the proton and electrons is identical, the electric force produces a smaller acceleration that is significantly greater than g, making it plausible to disregard gravity.

For more such questions on vertical displacement, Refer:

https://brainly.com/question/2289543

#SPJ4

Complete question is:

If the proton would not hit one of the plates, what would be the magnitude of its vertical displacement as it exits the region between the plates?

geologists attempting to locate metallic mineral resources such as copper and iron will first consider the ____ of the rock and how it formed.

Answers

Minerals can be located using geochemical surveys and remote sensors that analyze satellite images. Following that, mining or quarrying is used to remove many minerals.

What do you do to find mineral resources first?Search for Potential Deposits, Locating areas that are likely to contain mineral deposits is one of the first steps in the exploration process. Prospective areas might be close to other known mineralization areas or to active mine sites because mineral deposits frequently form in clusters.Minerals can be located using geochemical surveys and remote sensors that analyze satellite images. Following that, mining or quarrying is used to remove many minerals. Pumping, however, can be used to extract liquid minerals like oil or gas.When choosing which deposit to pursue, some factors include the deposit's location and shape, the rock's strength, the grade of the ore, the costs associated with mining it, and the commodity's current market price.                    

To learn more about minerals refer to:

https://brainly.com/question/15844293

#SPJ4

help mi plssneed it now​

Answers

The molar mass of a material is its mass expressed in grams per mole of the chemical.

What is meant by molar mass?

The ratio between a sample's mass and its substance content is known as the molar mass of a chemical compound in chemistry. A substance's molar mass is a bulk attribute rather than a molecular one.

A substance's molar mass is its mass in grams per mole of the chemical. A mole is the measurement of the quantity of atoms, molecules, or ions in a substance.

You may determine the mass of 1 mole of a compound by looking at its molar mass. In other words, it provides the amount of grams in a substance per mole. As a result, molar mass is measured in grams/mole.

To learn more about molar mass refer to:

https://brainly.com/question/21334167

#SPJ1

What is the boiling point, in °C,
of a 0.743 molal aqueous
solution of KCL?
BP(water) = 100 °C
Kb (water) = 0.512 °C/m
[?] °C

Answers

The boiling point in °C, of a 0.743 molal aqueous solution of KCL is 100.761 ∘ C

What is the boiling point, in °C?

Δ T b≡ T b − T * b = I K b m ,

where:

The difference between the solution's boiling point, T b, and the pure solvent's boiling point, T * b, in degrees Celsius, is known as T b.

The van't Hoff factor, or the actual number of solute particles in solution, is denoted by the letter i.

The water boiling point elevation constant is K b = 0.512 C/m.

mol solute/kg solvent is the solution's molality, or m. Does the solute have a high or low volatility?

Considering complete dissociation.

KCl ( a q ) → K + ( q ) + Cl − ( a q )

Additionally, 1+1=2i, thus...

T b = T * b + i K b m

= 100 ∘ C + 2 ⋅ 0.512 ∘ C/m ⋅ 0.743 m

= 100.761 ∘ C

To learn more about boiling point refer to:

https://brainly.com/question/1530966

#SPJ1

An atom is neutral. Its nucleus contains two protons and two neutrons. How many electrons does the atom have?
A. Three
B. Four
C. Two
D. Zero​

Answers

Answer:

C Two

Explanation:

no of proton = no of electron

Two electrons.
There needs to be equal number of proton (+) and electron (-) to cancel each other out in order to have no charge.

Why do we not just calibrate the gas thermometer at absolute zero? - Waiting for equilibrium at absolute zero would take much more time than is available - Measuring absolute zero requires liquid deuterium for coolant which is expensive - Absolute zero cannot practically be produced in any lab setting - Condensation of water vapor in the lab would raise the temperature

Answers

We do not just calibrate the gas thermometer at absolute zero because absolute zero cannot practically produced in o any lab setting.

Reason -

In order to cool a substance to absolute zero (-243-15°C), an unlimited amount of work would be required to remove the heat from it. Therefore, it is essentially impossible to create an environment with an absolute zero temperature.

Because absolute zero cannot effectively be manufactured in any lab setting, we cannot calibrate our thermometer at that temperature due to letter C. Since we cannot create absolute zero,

a thermodynamic system has its lowest energy at absolute zero degrees Celsius. It is equivalent to 459.67 degrees Fahrenheit and 273.15 degrees Celsius, respectively, on the thermometer.

Learn more about thermometer from here:

https://brainly.com/question/24189042

#SPJ4

What are valence electrons

Answers

The electrons present in the outermost shell experience less nuclear force because the distance between them and the nucleus is greater.These electrons are called valence electrons

Answer:

Valence electrons are electrons located in the outermost energy level (Responsible for bonding.)

Explanation:

Hope this helps :)

if gold’s density is 19.32 g/mL, how much would a 0.0333L sample weigh in grams?

Answers

A 0.0333-liter sample of gold would weigh 0.64326 grams.

This is calculated by multiplying the density of gold by the volume of the sample.

the density of gold = 19.32g/ml

the volume of the sample = 0.0333 L

sample weight = the density of gold × the volume of the sample

which is  19.32g/ml  ×  0.0333 L = 0.64326

In chemistry, density is a measure of the mass of a substance per unit of volume. It is typically represented by the Greek symbol "rho" (ρ) and is typically measured in units of grams per milliliter (g/mL) or grams per cubic centimeter (g/cm^3). A substance's density can be calculated by dividing its mass by its volume.

Learn more about density here:

https://brainly.com/question/29775886

.

how do silica tetrahedra bond in silicate minerals?

Answers

Quartz silica tetrahedra (SiO2) are linked in a "perfect" three-dimensional framework. Each tetrahedron is connected to four other tetrahedra (with one oxygen shared at each corner),

The silicon-to-oxygen ratio is one-to-one. The silicon atom's outer shell includes four electrons. Each of the four electrons in the silica tetrahedra is shared with one of the four oxygen atoms that are linked. In turn, each oxygen atom shares one of the six electrons in its outer shell. Two single chains of silica tetrahedra join together by sharing the third oxygen in alternating tetrahedra to produce an atomic structure. A kind of silicate mineral in which silica tetrahedra are arranged hexagonally. The quartz silica tetrahedra (SiO2) are connected in a "perfect" arrangement. Framework in three dimensions. Each tetrahedron is connected to four other tetrahedra (with one oxygen shared at each corner),

learn more about silica tetrahedra  here:

https://brainly.com/question/28069319

#SPJ4

The positively charged center in an atom is called as:A. NucleusB. NeutronsC. ProtonsD. Electrons

Answers

The positively charged center in an atom is called as Nucleus. It is made up of positively charged protons and neutral sub-atomic particle called as neutrons.

What is meant by protons ?

Every atom has a proton, a subatomic particle, in its nucleus.The particle possesses an electrical charge that is positive and opposite to the electron's.A subatomic particle with a negative charge is an electron. A subatomic particle having a positive charge is called a proton.The strong nuclear force holds protons together in the nucleus of an atom. A particular subatomic particle with no charge is the neutron.Although protons were once thought of as elementary particles, the Standard Model of particle physics now recognizes them as composite particles made up of three valence quarks, and they are grouped alongside neutrons as hadrons.

To learn more about  protons refer to

https://brainly.com/question/1805828

#SPJ4

How many grams are in 2. 0 moles of H2O?.

Answers

Answer:

36g

Explanation:

H2 = 2

O = 16

18 = Mr of H2O

mass = moles x Mr

mass = 2 x 18

mass = 36g

Help me Please!!!!!!!!

Answers

In order to heat 7.40g of water to a higher temperature, 526.35 joules of heat energy are needed.

How is heat energy measured and calculated?

Q = m•C•ΔT, Where Q is the amount of heat that is transported to or from the item, m is the object's mass, C is the material's specific heat capacity, and T is the change in temperature that results as a result.

7.40g of water needs 526.35 joules of heat energy to reach the desired temperature.

According to the following formula, the amount of energy is expressed:

The specific heat of water is 4.184 J/g0C and its mass is 7.40 grams.

In the formula, replace the specified parameters with:

In order to heat 7.40g of water to a higher temperature, 526.35 joules of heat energy are needed.

In order to heat 7.40g of water to a higher temperature, 526.35 joules of heat energy are needed.

The complete question is,

The temperature of 7.40g of water must be raised from 29.0 OC to 46.0 OC. Calculate the joules of heat energy needed to do so. 4.184 J/gOC for water's specific heat.

To learn more about heat energy refer to:

https://brainly.com/question/25603269

#SPJ1

The 400.0g of water requires 526.35 joules of heat energy.

What is heat energy?

The formula,

Q = m•C•T, where Q is the amount of heat transported to or from the item, m is the mass of the object, C is the specific heat capacity of the material, and T is the temperature change as a result.

To reach the desired temperature, 400.0g of water requires 526.35 joules of heat energy.

The amount of energy is expressed using the following formula:

Water has a specific heat of 0.664 J/g0C and a mass of 400.0 grams.

Replace the specified parameters in the formula with:

526.35 joules of heat energy are required to heat 400.0 g of water to a higher temperature.

526.35 joules of heat energy are required to heat 400.0g of water to a higher temperature.

To learn more about heat energy refer to :

https://brainly.com/question/19666326

#SPJ1

How many molecules are the in 1.8g of water molecules

Answers

Answer:

6.022 x [tex]10^{22}[/tex] molecules

Explanation:

One mole of any substance has 6.022x [tex]10^{23}[/tex] particles.

Mr of water: 16 + 2 = 18 g

moles of water given: 1.8/18 = 0.1 moles

Using ratio:

moles   :   molecules

   1        :    6.022x [tex]10^{23}[/tex]

 0.1      :          X

X = 0.1 x (6.022x [tex]10^{23}[/tex] )

X = 6.022 x [tex]10^{22}[/tex]

what is a test variable and a outcome variable
pls help me

Answers

The test variable is manipulated while the outcome variable is observed.

What is a variable?

When we use the term variable, our minds would have to go to something that has the ability to change. As such, when we are carrying out an experiment there is the variable that we manipulate and this would lead to a change in another variable.

The variable that we are able to manipulate as we are carrying out the experiment is what we call the test variable while the one that is changed due to this manipulation is called the out come variable.

Learn more about test variable:https://brainly.com/question/17344045

#SPJ1

PLEASE HELP ASAP!!!!
ANSWERS FOR THE LAST PHOTO
W
X
Y
Z

Answers

The number of neutrons of a pottasium atom with mass number of 39 is 20. The number of neutrons in an atom of lead with mass number 207 and atomic number 82 is 125.

How to find the number of neutrons in an atom?

An atom is made up of three subatomic particles namely; protons, neutrons and electrons.

The proton is the positively charged particle in the nucleus of the atom while the electron is the negatively charged particle surrounding the nucleus.

The number of neutrons can be calculated by subtracting the atomic number of the element from the mass number.

In question 1 of the above image, no of neutrons = 39 - 19 = 20 neutronsIn question 2, no of neutrons = 207 - 82 = 125 neutrons

Learn more about neutrons at: https://brainly.com/question/28992636

#SPJ1

The radius of a barium atom is 217
pm. How many barium atoms would
have to be laid side by side to span a distance of 2.60 mm?

Answers

12,005 barium atoms would have to be laid side by side to span a distance of 2.60 mm

What is  barium atoms?

Barium can be defined as a chemical element with the symbol Ba and atomic number 56.

To find the number of barium atoms that would have to be laid side by side to span a distance of 2.60 mm.

we need to divide the distance by the radius of one barium atom:

2.60 mm / 217 pm = 12,005

Therefore, 12,005 barium atoms would have to be laid side by side to span a distance of 2.60 mm.

Learn more about barium atoms here: brainly.com/question/23694560

#SPJ1

The actual volume of molecules of gas is negligible as compared to the total volume of gas since:
a A large volume is occupied by empty spaces
b A fewer number of molecules are present
c Both A and B
d None of the above

Answers

The actual volume of molecules of gas is negligible as compared to the total volume of gas since C. Both A and B.

The Ideal Gas LawThe actual volume of molecules of gas is negligible as compared to the total volume of gas because the majority of the gas is made up of empty spaces. The gas is composed of discrete particles, or molecules, that are separated by a tremendous amount of empty space, and the number of molecules present is incredibly small compared to the total volume of the gas. When a gas is confined to a container, the number of molecules within the container is fixed, and the volume of the container is also fixed. However, the spacing between the molecules is not fixed and can be manipulated. Since the total volume of the container remains the same, but the spacing between the molecules can be changed, the actual volume of molecules present is negligible as compared to the total volume of the gas.This phenomenon is known as the Ideal Gas Law, and it states that the pressure of a confined gas is directly proportional to its temperature and inversely proportional to its volume. The greater the temperature, the more energy the molecules have and, consequently, the closer they are to each other. This means that the actual volume of molecules present is much smaller than the total volume of the gas.Therefore, the actual volume of molecules of gas is negligible as compared to the total volume of gas because the majority of the gas is made up of empty spaces and the number of molecules present is much smaller than the total volume of the gas.

To learn more about The actual volume of molecules of gas refer to:

https://brainly.com/question/26822196

#SPJ1

Margarita decides to enter her school's science fair. She has always loved flowers and wants to incorporate them into her
project. In the end, Margarita decides to test the effectiveness of different types of plant food (fertilizer) on a certain type of
rose bush. Her goal is to determine which fertilizer produces the tallest rose bushes with the greatest number of flowers.
Describe how Margarita might set up her experiment. Discuss the actions Margarita should take to get reliable data.

Answers

Answer: Statistics is the best way for Margarita to organize, interpret, and present her data.

Explanation:

how many chlorine atoms are in the compound fe2cl3

Answers

There are three chlorine atoms in each FeCl3 molecule. In terms of the total number of atoms in the molecule ferric chloride, there are four.  chlorine atoms are in the compound fe2cl3.

Chlorine atoms molecules are made up of two atoms (Cl2). Except for the lighter noble gases, chlorine interacts with practically all elements to form chlorides; those of most metals are ionic crystals, whilst those of semimetals and nonmetals are mostly molecular. Chlorine has an atomic mass of 35.45 and an atomic number of 17, implying that one atom of chlorine has 17 protons, 17 electrons, and 18 neutrons. Chlorine, being a member of the Periodic Table's halogen family, is particularly reactive with metals and creates salts. When the element chlorine (a halogen) obtains an electron or when a molecule such as hydrogen chloride is dissolved in water or other polar solvents, it is produced. Sodium chloride and other chloride salts are frequently extremely soluble.

learn more about Chlorine atoms  here:

https://brainly.com/question/20834469

#SPJ4

which elements are most likely to react in the same manner in a chemical reaction?

Answers

The elements most likely to react in the same manner in a chemical reaction are those that are in the same group. It because of the same number of valence electrons.

The elements in the same group are most likely to react in the same manner in a chemical reaction. It is because their outer shells have the same number of valence electrons. In fact, the electrons are the component of an atom that is involved in reactions. Meanwhile, the protons and neutrons in an atom's nucleus are not involved in reactions.

For example:

Elements in the Group 1 (Alkali metals) contains Li, Na, K, Rb, Cs, and Fr.

- They all have one valence electron, which they easily lose when forming ions.

- They are easily reacted with water

- They possess low melting points and densities

- They are good electrical conductors.

Here to learn more about the Elements of the Periodic Table:

https://brainly.com/question/25916838

#SPJ4

Which prediction best shows what the population could look like after many generations? What caused it to change?

Answers

Prediction 1 best shows what the population could look like after many generations. Because, the long beak traits is having more life time.

What is genetic traits ?

Each characteristics in a living thing is created by a respective genetic coding in its body. The genetic code which is responsible for a particular behavior or appearance is called a genetic trait.

Here, the prediction 1 is best . It already saying that long-beak hummingbirds are more likely to survive, that baby survived long enough to pass on its mutation, so the long-beak trait became more common over generations.

Prediction 2 says abut a  genetic trait which is less fit to survive. Hence, cannot affect the next generation population. Therefore, prediction 1 is best.

Find more on genetic traits:

https://brainly.com/question/29679846

#SPJ1

Your question is incomplete. But your complete question probably was:

Prediction 1 :Two hummingbirds with short or medium beaks had a baby with a mutation in its genes for the long-beak trait.

Prediction 2 is best. A hummingbird could have been born with a mutation in its genes for the long-beak trait and lived for a little while.

In the activity series, the more active elements are found
(a) at the bottom
(b) in the middle
(c) at the top
(d) both (a) and (c)

Answers

In the activity series, the more active elements are found at the bottom and at the top. Option d.

The activity series is a way of organizing elements according to their reactivity.

The elements found at the bottom of the series are the most active, and those found at the top are the least active.

Knowing the activity series can help us predict how a reaction will proceed, and can be a useful tool when determining which compounds are most likely to form in a given reaction.

The elements at the bottom of the activity series are the most active, and the elements at the top are the least active. Knowing the activity of elements can help you understand the chemical properties of different materials and how they may interact with each other.

To learn more about series, click here:

https://brainly.com/question/14129976

#SPJ4

AE=mcAT
AT=(Tr-T)
c=Specific Heat
AE= Heat Energy / Heat Gain or Loss
The specific heat of water is 4.2 J/g°C. If you have 10 g of what how much energy has to be lost to lower the
temperature from 25°C to 10°C?
-49.2 J
O-630 J
1 point
-1,470 J
O-10,500 J

Answers

Δt = 25°C - 10°C = 15°C

c = 4.2 J g^-1 °C^-1

m = 10 g

Heat energy required

= mcΔt

= 10×4.2×15

= 630 Joules

Other Questions
A farmhouse shelters 11 animals. Some are goats and some are ducks. Altogether there are 34 legs. How many of each animal are there?(with work) How can cheer dance help an individual fitness?. If Jon runs 35 miles a week, and Jacky runs 57 miles a week, how much more does Jacky run than Jon? The moon is approximately 240,000 miles from earth. What is the distance between the earth and the moon in km? A podcast host is curious how her listeners like the show. She decides to poll the next 100 listeners who send her fan emails. 80 out of 90 listeners polled said they liked it. The result may lead to-volunteer vias-response bias-selection bias -non response bias art a. directions: determine which of the following activities of napoleon were successes and which were failures. explain the reasons for your choices. activity 1. creation of republics 2. continental system 3. concordat of 1801 4. abolition of serfdom and feudalism 5. invasion of russia success or failure reasons 6. code napoleon 7. aggrandizement of his family 8. nationalism What are the 3 most important things in a poem?. evaluate f(-x)=x/x2+1 Read the excerpt from The Strange Case of Dr. Jekyll and Mr. Hyde."Now, my good man, said the lawyer, "be explicit. What are you afraid of?"Ive been afraid for about a week, returned Poole, doggedly disregarding the question, "and I can bear it no more.The mans appearance amply bore out his words; his manner was altered for the worse; and except for the moment when he had first announced his terror, he had not once looked the lawyer in the face. Even now, he sat with the glass of wine untasted on his knee, and his eyes directed to a corner of the floor. "I can bear it no more, he repeated."Come, said the lawyer, "I see you have some good reason, Poole; I see there is something seriously amiss. Try to tell me what it is."I think theres been foul play, said Poole, hoarsely.How does this event best connect to the theme "Appearances shape peoples opinions?Mr. Utterson is surprised that Poole comes to speak with him.Mr. Utterson asks Poole why he is frightened.Poole looks so disturbed that Mr. Utterson listens to him closely.Poole has a strong feeling that something is wrong at the Jekyll home. Which of the following are techniques for Bystander Intervention? Select all that apply. (Preventing Assault - Bystander Intervention, page 4 of 8)o Delegate - to appoint someone elseo Direct - to give commands or orderso Distract - to draw away or divert attention tesla is building a car battery factory in nevada to drastically increase its production capacity from where it is now. since the factory has not opened, tesla is . Which i an example of how marcu garvey advocated nationalim through economic independence in the united tate whats x. please find x for me removing heat will lower the ___, causing the particles of the reactants to slow down, resulting in less frequent collisons Which angle has sides DB and DC? Select all that apply. 80x/A company sells shirts for $10 each. Its revenue function is r(x) = 10x.Its costs are $3 per shirt plus $9,000 of fixed costs. Its cost function isc(x) = 3x + 9000. Use this information for Problems 13-15. The firstone is done for you.13. Find the company's revenue and costs if it sells 2000 shirts.Revenue = $20,000; costs = $15,00014. Profit equals the difference between revenue and cost. Write thefunction, p(x), for this company.15. In 2012, the company sold 5000 shirts. Find its profit.in Hercourt Additions and changes to the original content are the respon What are symptoms of lead poisoning in children? determine an appropriate interval width for a random sample of 110 observations that fall between and include each of the following: (a) 20 to 85 (b) 30 to 190 (c) 140 to 500 upon assessment after giving oral penicillin, the nurse notes that a client has dilated pupils, increased blood pressure, and increased heart rate. the nurse would document these findings as which type of drug allergic reaction? calculate the change in heat for the water. show all calculations. (hint: you must use the heat energy equation here: heat energy