Please help! Question is attached!​

Please Help! Question Is Attached!

Answers

Answer 1

Answer:

1. -6m/s

2. 0m/s

3. 3m/s

4.14.38N

5. 25.9 J

Explanation:

1. point A and C same height means velocity will be the same just in opposite direction,  = -6m/s

2. at max height vertical velocity is 0

3. same as point A

4. Weight is mg = 1.438*10 = 14.38N

5. total energy is KE+PE, which never changes

so TE = 32.4 and KE =6.5J then PE = 32.4-6.5 = 25.9 J


Related Questions

A block requires an applied force of 20N to begin moving it to the right. What is the maximum static friction?
a. Less than 20 N
b. Exactly 20 N
c. Just over 20 N
d.Twice as much as the block's weight

Answers

Answer:

A.

Explanation:

Thats my answer

Please make me branlies answer

Which of these is a likely impact of the stronger than normal trade winds on the eastern Pacific ocean?

Warm surface water builds up, causing lower than average temperature.
Warm surface water builds up, causing higher than average temperature.
Warm surface water is reduced, causing colder conditions than normal.
Warm surface water is reduced, causing hotter conditions than normal.


Just say A B C or D which one

Answers

Answer:

b i think

Explanation:

hope this helps

Answer:  A B C or D which one

Explanation:

Tommy does 45 Joules of work to push the pencil over 3 meter. How much force did he use?

Answers

Answer:

Work = Force × Distance

Therefore Force = Work/Distance

= 45 joules/3 metres

= 15 newton

Explanation:

Answer:

15

Explanation:

15

flat mirror: draw ray diagram for an object placed at F

Answers

Answer:

...

Explanation:

I'm doing this for points sorry

A ball is fired from a cannon at point 1 and follows the trajectory shown in the figure below. Air
resistance may be neglected. Five possible vectors are also shown in the figure; the letter E represents
the zero vector.

D
E:
C
B
a
Which vector best represents the ball's velocity at position 2?
Which vector best represents the ball's acceleration at point 2?
Which vector best represents the ball's velocity at position 3?
Which vector best represents the ball's acceleration at point 3?
du
b)
A
d)

Answers

In trajectory, acceleration vector is not the same with the velocity vector but it depends on the change in velocity. The acceleration path is perpendicular to the velocity vector path. The Correct answers are:

a.) D

b.) B

c.) C

d.) A

A Vector is a quantity that has both magnitude and direction.

Given that a  ball is fired from a cannon at point 1 and follows the trajectory shown in the figure.

a.) The vector best represents the ball's velocity at position 2 is D

b.) The vector best represents the ball's acceleration at point 2 is B

c.) Which vector best represents the ball's velocity at position 3 = C

d.) Which vector best represents the ball's acceleration at point  = A

In trajectory, acceleration vector is not the same with the velocity vector but depends on the change in velocity. The acceleration path is perpendicular to the velocity vector path.

At point 3, since the ball path is parabolic, the velocity at that point is not equal to zero but will tend to take a horizontal path.

Learn more here: https://brainly.com/question/25519989  

A ruined in a race decides to accelerate right up to the moment he crosses the line He is the initially travelling at 5m/s and accelerates at 0.4m/s² for 5 sec. find
a) the distance he covers
b) his final velocity​

Answers

Answer:

S = V t + 1/2 a t^2 = 5 m/s * 5 s + .2 m/s^2 * 25 s^2 =

25 m + 5 m = 30 m     distance traveled

Vf = V + a t = 5 m/s + .4 m/s^2 * 5 s = (5 + 2) m/s = 7 m/s    final velocity

The first hill of a roller coaster is 42.0 meters high. The bottom of the first hill is 4.2 meters off the ground.The roller coaster cart has a mass of 4500 kg.
Calculate its potential energy at the top of the first hill.





Calculate its potential energy at the bottom of the first hill.





Challenge- What is the velocity of the cart at the bottom of the first hill?

Answers

Answer:

1.89*10⁶J

Explanation:

because 4500kg * 42m*10m/s² is 1890000J

In what way are liquids different from solids?.

Answers

Answer:

solid molecules are packed closely and liquid molecules are losely packed

What is an energy storage device composed of electrochemical cells?​

Answers

An energy storage device composed of electrochemical cells is referred to as: battery.

A power source can be defined as a source of electrical energy that is used to power all electronic devices.

Generally, a power source can be classified into two (2) main categories and these include:

Alternating current (AC)Direct current (DC)

A battery refers to an energy storage device that comprises electrochemical cells and it serve as a source of direct current (DC). Also, sometimes a battery can be recharged when its electrochemical cells are still active.

Read more on battery here: https://brainly.com/question/4922532

Answer:

Battery is an electrical energy storage device consisting of one or more electrochemical cells with external connections that provide power to electrical devices such as flashlights, smartphones, and electric cars.

how does amplitude determine loudness?

Answers

Answer:

Explanation:

Amplitude is a measure of the size of sound waves. It depends on the amount of energy that started the waves. Greater amplitude waves have more energy and greater intensity, so they sound louder.

Answer:

Amplitude determines the loudness of a wave. Greater the amplitude, greater is the loudness.

Explanation:

Amplitude is a measure of the size of sound waves. It depends on the amount of energy that started the waves. Greater amplitude waves have more energy and greater intensity, so they sound louder. ... The same amount of energy is spread over a greater area, so the intensity and loudness of the sound is less.

I hope this helps have a great day :)

if a car travels around a circular track with a radius of 100 m once every 10s what will its average angular velocity around the track be?

Answers

Answer:

0.628 radians per second

Explanation:

Angular velocity

= 2pi/T

= 2(3.14159)/10

= 0.628 radians per second

The average angular velocity around the track is 62.8 m/s, using the circumference of the track as the total distance.

Average angular velocity:

What information do we have?

Radius of track = 100 m

Time taken = 10s

Circumference of track = 2πr

Circumference of track = 2(3.14)(100)

Circumference of track = (2)(314)

Circumference of track = 628 m

Average angular velocity around the track = Circumference of track / Time taken

Average angular velocity around the track = 628 / 10

Average angular velocity around the track = 62.8 m/s

Find out more information about 'Velocity'.

https://brainly.com/question/18084516?referrer=searchResults

How many molecules of Oxygen gas are there on the reactant side of this equation?
C2H6 + 402 ———-> CO2 + H2O
O2
O3
04
O8

Answers

Answer:

4

Explanation:

It has 8 O atoms and 4 O2(g) molecules

how long does it take saturn to rotate on its axis

Answers

Answer:

Orbit and Rotation

One day on Saturn takes only 10.7 hours (the time it takes for Saturn to rotate or spin around once), and Saturn makes a complete orbit around the Sun (a year in Saturnian time) in about 29.4 Earth years (10,756 Earth days).

Explanation:

The mass of a basketball is three times greater than the mass of a softball. Compare the momentums of a softball and a basketball if they both are moving at the same velocity.

Answers

Answer:

The momentum of the basketball is three times that of the softball. Momentum equals mass times velocity. Therefore, if the basketball and softball are moving at the same velocity, and the basketball has three times the mass of the softball, the basketball has three times the momentum of the softball.

Explanation:

pa brainliest

Calculate torque using angular momentum

Answers

Answer:

The equation net τ=ΔLΔt net τ = Δ L Δ t gives the relationship between torque and the angular momentum produced.

The efficiency of a motor is 15%. The student calculated the useful output energy transfer is 1.20J. Calculate the total input energy transfer.

Answers

Answer:

[tex]8.0\; \rm J[/tex].

Explanation:

The efficiency of a machine is the ratio between the useful output and the energy input:

[tex]\begin{aligned}\text{efficiency} &= \frac{\text{useful output}}{\text{energy input}} \times 100\%\end{aligned}[/tex]

Rearrange this equation to find energy input in terms of efficiency and useful output:

[tex]\displaystyle \text{energy input} = \frac{\text{useful output}}{\text{efficiency} / (100\%)}[/tex].

Substitute in the values: [tex]\text{useful output} = 1.2\; \rm J[/tex] and [tex]\text{efficiency} = 15\%[/tex]. Evaluate to find the value of [tex]\text{energy input}[/tex]:

[tex]\begin{aligned} \text{energy input} &= \frac{\text{useful output}}{\text{efficiency} / (100\%)} \\ &= \frac{1.20\; \rm J}{15\% / (100\%)} \\ &= 8.0\; \rm J\end{aligned}[/tex].

(Rounded to two significant figures as in the value of efficiency.)

What happens to the sound an object makes when the speed of vibrations decreases (slow down)?.

Answers

The frequency decreases, and you will hear a lower tone

when a viscous fluid flows in a tube, its velocity is __________.

Answers

From the equation, r is the distance from the center of the tube. When r = 0, you're considered to be at the centerline and the expression has the highest value. Therefore, the velocity of a viscous fluid is greatest at the center of the tube.

plss helpp:((

(i'll mark as brainliest if u answer)

Answers

Answer:

Seriously Your Question Is Kinda Tremendous

Explanation:

I'll Head Is Boiling From Question That Keeps Popping Up My Head, Someone Might Give You A Positive Hand

Where does the energy released in a nuclear decay reaction come from


A. Electrons


B. Chemical bonds


C. Positrons


D. The binding energy of the nucleus

Answers

The answer is electrons

What water pressure must a pump that is located on the first floor supply to have water on the thirteenth of a building with a pressure of 35 lb/in2 Assume that the distance between each floors is 10ft.

Answers

The water pressure on the first floor must be 455 PSI in order to push the water to the 13th floor at the given pressure.

The given parameters;

Pressure on the 13 th floor, P₁ = 35 PSIDistance between each floor, d = 10 ft

The vertical pressure of the water is calculated as follows;

[tex]P = \rho gh\\\\\frac{P}{h} = \rho g\\\\\frac{P}{h} = k\\\\\frac{P_1}{h_1} = \frac{P_2}{h_2} \\\\[/tex]

The vertical height of the first floor from the 13th floor = 130 ft

The vertical height of the 13 ft floor = 10  ft

[tex]P_1 = \frac{P_2 h_1}{h_2} \\\\P_1 = \frac{35 \times 130}{10} \\\\P_1 = 455 \ PSI[/tex]

Thus, the water pressure on the first floor must be 455 PSI in order to push the water to the 13th floor at the given pressure.

Learn more about vertical height and pressure here: https://brainly.com/question/15691554

How to find velocity from acceleration time graph.

Answers

Answer:

We can only find the change in velocity by the area under the acceleration time graph by calculating the area under the curve to the given time. Then by the formula of the difference in the final and initial velocity you can find the final velocity of the object in the given time period.

Suppose the gravitational force between two spheres is 30 N. If the magnitude of both masses doubles, and the distance between them tripled. What is the force between the masses?

Answers

If both masses double in size and their separation between them triples. 13..33 N will be the force between the masses.

What is gravitational force?

Newton's law of gravity states that each particle having mass in the universe attracts each other particle with a force known as the gravitational force.

Gravitational force is proportional to the product of the masses of the two bodies and inversely proportional to the square of their distance.

Given data:

The gravitational force = 30 N

Mass 1 =m₁

Mass 2=m₂

Distance between charges = R

Condition given:

Mass 1 = 2m₁

Mass 2= 2m₂

Distance  between charges = 3R

[tex]\rm F = \frac{Gm_1m_2}{R^2}[/tex]

Case 2;

[tex]\rm F'=\frac{G(2m_1)(2m_2)}{(3R)^2} \\\\ F'=\frac{4}{9} \frac{Gm_1m_2}{R^2} \\\\ F'=\frac{4}{9} F \\\\ F'=\frac{4}{9} \times 30 \\\\ F'=13.33 \ N[/tex]

Hence, the forces between the masses will be 13..33 N.

To learn more about the gravitational force refer to the link;

https://brainly.com/question/24783651

#SPJ1

If the submarine intends to submerge to a depth of 150 m, what pressure must it be designed to withstand

Answers

Explanation:

Hydrostatic pressure, P = hdg where d is density if the liquid ( water)

P= 150m × 1000kgm-3 × 10ms-2

P= 1.5 ×10^6 Pa

When you see the bright flash of a meteor, what are you actually seeing?.

Answers

a pea-sized particle and the surrounding air as the particle burns up in our atmosphere (In other words, you do not see the particle itself, but only the effects it has on the surrounding air as it burns up.)

The actual things we are seeing if we see the bright flash of a meteor are a pea-sized particle and the surrounding air as the particle burns up in our atmosphere.

What are meteors?

A meteor is a space rock that enters the atmosphere of the earth and produces a streak of light in the sky. Sometimes, people refer to them as shooting stars. When meteoroids enter the earth's atmosphere, they become meteors.

The night sky can be illuminated by meteors, also known as shooting stars, which are bits of space dust and debris that burn up in the Earth's atmosphere.

A pea-sized particle burns up in our atmosphere, and the surrounding air In other words, you do not see the particle itself, but only the effects it has on the surrounding air as it burns up.

Thus, we are seeing burned particles or dust when we see meteors.

To know more about meteors:

https://brainly.com/question/11504264

#SPJ12

how to find the latitude and longitude of an address

Answers

Answer:

To get the latitude of the address in cell B2, use the formula = GetLatitude (B2) To get the longitude of the address in cell B2, use the formula = GetLongitude (B2) To get both the latitude and longitude of the address in cell B2, use the formula = GetCoordinates (B2)

Explanation:

CAN I GET BRAINLIEST

PLEASE HELP

While moving at a constant speed on a level, snowy surface, a snowmobile rider throws a snowball vertically up-
wards. If the snowmobile continues moving at a constant velocity, the ball returns to the driver. Explain, using one of Newton's Laws of Motion why the ball lands ahead of the driver if the snowmobile stops.

Answers

The ball lands ahead of the driver if the snowmobile stops in obedience to the law of inertia.

According to Newton's first law of motion, an object continues in its state of rest or uniform motion unless it is acted upon by an unbalanced external force. This is also known as the law of inertia.

The law of inertia explains the reluctance of an object to stop when it has started moving and also the reluctance of objects to start moving. The ball lands ahead of the driver if the snowmobile stops in obedience to the law of inertia.

Learn more: https://brainly.com/question/13678295


During a test, a solution placed on a sheet
of metal creates bubbles. This solution is
most likely
A. Acidic
B. Neutral
C. Basic

Answers

Answer:

B. Acidic

Explanation:

Neutral an Basic solutions wouldn't create any reaction

If during a test, a solution placed on a sheet of metal creates bubbles, we can conclude that this solution is most likely Acidic.

Reaction of metals with acid

Acid reacts vigorously with metal, displacing hydrogen gas in the process and this process creates bubbles of gases trying to escape from the solution.

Metals do not react basic and neutral solutions.

If during a test, a solution placed on a sheet of metal creates bubbles, we can conclude that this solution is most likely Acidic.

Learn more about reaction of metal with acid here: https://brainly.com/question/4015743

What are the two factors that affect the gravitational pull between two objects?

Answers

Answer:

hen dealing with the force of gravity between two objects, there are only two things that are important – mass, and distance.

Explanation:

how did u figure this out

Answers

Answer:

huh? figure wht out??

Explanation:

have a great day!

Answer:

What's the meaning of the phrase 'figure it out'?

figure out 1 To discover or decide something: Let's figure out a way to help. We figured out when to hold the next meeting. 2 To solve or decipher something: Can you figure this puzzle out? Late into the night, I figured out my homework

Explanation:

Other Questions
A company makes 140 bags.41 of the bags have buttons but no zips.48 of the bags have zips but no buttons.25 of the bags have neither zips nor buttons.A bag is selected at random.What is the probability that the bag has buttons? Use the triangle below to fill in the blanks. Billy has a tantrum and dumps puzzle pieces on the floor. Billy not only has to pick up the puzzle pieces, but he also has to clean up the entire toy room. Which punishment procedure involves restoring the environment to a condition better than it was prior to the problem behavior netflix there was a problem selecting this profile Which graph is right? What is the y-intercept of the following table?Gasoline UsageMiles Driven,Gallons ofGasoline inTank, y0151014.62014.23513.66012.67512Your answer Help me plsssssAny answer ill give 5 star X2-7x-34=10 solve please Using substitution, which value of x makes this equation true?3+x = 10A. 13B. 7C. -7D. -13 official currency of the federal republic of nigeria Given h(t) = -2(t+ 5)^2 +4, find h(-8). Could somone help me with this please TvT ill give brainliest The graph represents the distance a car traveled over time.What is the constant of proportionality K. which statement about sternbergs triangular theory of love is most accurate? Express 8^-4 using a positive exponents if the output number y is -52 (y=5x-2) what is the input number? SHOW WORK Consider the following code segment, which is intended to store the sum of all multiples of 10 between 10 and 100, inclusive (10 20 ... 100), in the variable total. int x = 100;int total = 0;while( /* missing code */ ){total = total + x;x = x - 10;}Which of the following can be used as a replacement for /* missing code */ so that the code segment works as intended?A. x < 100.B. x 10.D. x >= 10.E. x != 10. why racism is a problem? How is it negatively impacting the world that we live in? What would the proverbe be in French for these? le 3 novembrele 8 novembre le 15 novembre le 22 novembre Nicole was given a box of assorted chocolates for her birthday. Each night, Nicoletreated herself to some chocolates. There were originally 24 chocolates in the box andNicole ate 3 chocolates each night. Make a table of values and then write an equationfor C, in terms of t, representing the number of chocolates remaining in the box tdays after Nicole's birthday.Number of Days After Nicole'sBirthdayNumber of Chocolates Remaining in theBox0123