one negative two and then shifted to the rights, that's the translation to the right two units.
What is the sequence of transformation?
A certain order of transformational occurrences is referred to as a transformational sequence. This indicates that more than one transformation is handled by a series of transformations, and the order in which they happen is important.its a 180 Degree Rotation.
And let's see With a 180 degree rotation.
, we can say coordinates is that X. Y. Two negative X. Negative Y.
It goes to one negative two and he goes to two negative five And c goes to 5 -2.
So if one negative two and then shifted to the rights, that's the translation to the right two units.
Learn more about transformational sequence.
brainly.com/question/11352944
#SPJ9
Find the compound interest and the total amount after three years if the interest is compounded half yearly. if principal is ₹1024 rate of interest 100% per annum
[tex]~~~~~~ \textit{Compound Interest Earned Amount} \\\\ A=P\left(1+\frac{r}{n}\right)^{nt} \quad \begin{cases} A=\textit{accumulated amount}\\ P=\textit{original amount deposited}\dotfill &\$1024\\ r=rate\to 100\%\to \frac{100}{100}\dotfill &1\\ n= \begin{array}{llll} \textit{times it compounds per year}\\ \textit{half-yearly, thus twice} \end{array}\dotfill &2\\ t=years\dotfill &3 \end{cases}[/tex]
[tex]A=1024\left(1+\frac{1}{2}\right)^{2\cdot 3} \implies A=1024(1.5)^6\implies A = 11664~\hfill \underset{earned~interest}{\stackrel{11664~~ - ~~1024}{10640}}[/tex]
30 POINTS Graph the solution to this inequality on the number line. 1/2 x - 3 < -1 3/8
The graphing is achieved as follows:
On the graph the third sign counting from the left is used.
This is placed on the first mark of the three marks between 3 and 4. This point equivalent to 3 1/4 or 3.25
How to find the solution of the equation
Given data
the graph
and the equation 1/2 x - 3 < -1 3/8
solving for x gives
1/2 x - 3 < -1 3/8
1/2 x < 3 -11/8
x/2 < 13/8
x < 13 / 4
x < 3 1/4
On the graph the third sign counting from the left is used.
The arrow is facing left, this is to show the sign less than.
The tail has a hollow not a solid point to show that equality sign is not included.
This is placed on the first mark after point 3 as this is the point equivalent to 3 1/4 or 3.25
Read more on graphs here: https://brainly.com/question/19040584
#SPJ1
Adventure Travel has an Adjusted Trial Balance for Year Ended December 31, 20XX with the following account balances:
DEBITS: Cash: 25,000; Accounts Receivable: 15,000; Office Supplies: 4,300; Office Equipment: 29,600
CREDITS: Accumulated depreciation - office equipment: 5,000; Salaries Payable: 2,800; Long-term notes payable: 22,200; Common Stock: 20,000; Retained Earnings: 10,260
DEBIT: Cash Dividends: 1,000
CREDITS: Fees Earned: 75,000
DEBITS: Salaries Expense: 32,800; Rent Expense: 16,800; Depreciation expense - office equipment: 3,960; Advertising expense: 4,000; Office supplies expense: 2,800.
Total Debits = 135,260; Total Credits = 135,260
You have prepared the Income Statement and the Statement of Retained Earnings, now it is time to prepare the Classified Balance Sheet.
What amount do you report for Plant Assets? Specify as a whole number.
The amount to report for Plant Assets in the Classified Balance Sheet of the company is $24,600
What are plant assets?
Plant assets are long-term fixed assets used to manufacture or sell products and services for Adventure Travel. These assets are of tangible nature and of monetarily benefits to the company for more than one accounting year.
The only plant assets in this case is the office equipment bearing in mind that it has a contra entry, in other words, the $29,600 is the cost of the office equipment , we need to deduct the accumulated depreciation on it so as to determine its current book value
plant assets=$29,600-$5,000
plant assets=$24,600
Find out more about plant assets on:https://brainly.com/question/17643298
#SPJ1
A machinist is required to manufacture a circular metal disk with area 600 cm2 . (a) What radius produces such a disk? (b) If the machinist is allowed an error tolerance of ±5cm2 in the area of the disk, how close to the ideal radius in part (a) must the machinist control the radius? (c) In terms of the limit limx→a f(x) = L, what is f(x)? What is a? What is L?
The required radius and error in radius is 13.8 cm and ± 0.12cm
Given that,
A machinist is required to manufacture a circular metal disk with an area of 600cm².
(a) What radius produces such a disk is to be determined
(b) If the machinist is allowed an error tolerance of ±5cm2 in the area of the disk, how close to the ideal radius in part is to be determined.
The area of a circle is given by the pie times square of the radius.
Area of circle = πr^2
Here,
a) The given area of disk = 600 cm²
πr² = 600
r = √600/3.14
r = 13.8 cm
b) an error tolerance of ± 5 cm² in the area of the disk,
So the percentage of error is 0.84%
Now, 0.84% of radius = 0.84 *13.8/100 = 0.12
The required error in radius will be ±0.12 cm
Similarly,
c) limx→a f(x) = L
Where a is the area of the disk and L is length, and f(x) is function of area.
Thus, the required radius and error in radius is 13.8 cm and ± 0.12cm.
Learn more about circle here:
brainly.com/question/11833983
#SPJ1
What's the correct answer?
Answer- D = (equal sign)
Explanation-
When you see two straight lines in math | | with number inside, regardless if the number inside is positive or negative, the outcome will be positive. This is called the absolute value. After we solve our absolute value however, there is a negative on the outside, which means that 61 will become negative again. Our equation is now -61 _____ -61. Your correct choice will be the equal sign, since -61 is equal to -61.
HOPE THIS HELPS GOOD LUCK!
Area of arrow
Find the area of the figure below
Please help
Answer:
area of the arrow is 36inches^2
Step-by-step explanation:
Area of rectangle= lw
10x3=30
Area of triangle = bh/2
3x4=12/2=6
30+6=36 inches^2
What is the formula used to arrive at x^2-11x+10
Answer:
Quadratic Formula
Step-by-step explanation:
x^2-11x+10=
x^2-x-10x+10=
x(x-1)-10(x-1)=(x-10)(x-1)
48 inches long and 36 inches wide. What is the area?
Answer:
1728
Hope this helps :)
Given the function f(x) = |x+3|, find each of the following.
f(6), f(- 10), f(0)
f(6) = ?
The value of the functions f(6), f(- 10), f(0) are 9, 7 and 3 respectively.
What is a function?A function can be defined as an expression, rule or law that shows the relationship between a dependent and an independent variable.
Given the function;
f(x) = |x+3|
To determine f(6)
Substitute the value of x as 6
We have;
f(6) = | 6 + 3 |
f(6) = 9
To determine f(-10)
Substitute the value of x as - 10
We have;
f(-10) = | -10 + 3 |
f(-10) = | -7|
f(-10) = 7
To determine f(0)
Substitute the value of x as 0
We have;
f(0) = | 0 + 3|
f(0) = 3
Thus, the value of the functions f(6), f(- 10), f(0) are 9, 7 and 3 respectively.
Learn more about functions here:
https://brainly.com/question/2328150
#SPJ1
I don’t know this one question
Answer:
v = 13
Step-by-step explanation:
because they are supplementary angles they add up to 180
so
add them
and put them equal to 180
9v + 3 + 60 = 180
combine like terms
9v + 63 = 180
now subtract 63 to both sides
9v = 117
divide 9 to both sides
v = 13
that is your answer
Need help with this please
Answer:
HELP WITH WHAT?
Step-by-step explanation:
help me pleaseeeeeeeeee
Answer:
Step-by-step explanation:
x + x + 16 = 90
2x +16 = 90
2x = 74
x = 37
Pls help me understand this.
The area of the polygon is approximately 24.497 square units.
How to determine the area of a polygon
In accordance with the statement, we have a polygon with three vertices set on Cartesian plane, that is, a triangle. We need to find the side lengths first and later to calculate the area by Heron's formula. First, determine the lengths of each line segment by Pythagorean theorem:
JK = √[[4 - (- 3)]² + (4 - 4)²]
JK = 7
KL = √[(3 - 4)² + (- 3 - 4)²]
KL = √[(- 1)² + (- 7)²]
KL = 5√2
JL = √[[3 - (- 3)]² + (- 3 - 4)²]
JL = √85
Second, calculate the area of the triangle:
s = (JK + KL + JL) / 2
s = (7 + 5√2 + √85) / 2
s ≈ 11.645
A = √[s · (s - JK) · (s - KL) · (s - JL)]
A = √[11.645 · (11.645 - 7) · (11.645 - 5√2) · (11.645 - √85)]
A ≈ 24.497
The area of the polygon is approximately 24.497 square units.
To learn more on Heron's formula: https://brainly.com/question/20934807
#SPJ1
HELP
The scatterplot for age in months and number of diaper changes per day is shown.
Part A: Estimate and interpret the correlation coefficient. (5 points)
Part B: Create an influential point for this graph that would cause the correlation to decrease. Explain your reasoning.
Answer:
Here's an answer to part of your question.
Step-by-step explanation:
The older the kids get, the less you have to change their diapers. Therefore, that is why the graph is going down
-0.75(12x+60) = -x-8x - 15.
Answer:
Step-by-step explanation:
-9x - 45 = -7x - 15 (Distribute -0.75 to (12x+60)) (x-8x = -7x)
-30 = 2x (add 15 to both sides and add 9x to both sides)
-15 = x (divide both sides by 2)
please help
please hurry
The turning point of the equation of the graph f(x) = |x - 4| is (4, 0)
How to determine the turning point of the graph?The equation of the graph is given as
f(x) = |x - 4|
The above equation is an absolute value function
An absolute value function is represented as
f(x) = a|x - h| + k
Where the vertex is
Vertex = (h, k)
The vertex also represents the turning point of the absolute value function
From the given equation, we have
(h, k) = (4, 0)
Hence, the turning point of the graph is (4, 0)
Read more about absolute value function at
https://brainly.com/question/3381225
#SPJ1
"clown juggles 12 bowling for the first 2.5 minutes then he bump it up to an average of 18 bowling pins per minute cor the last 1 1/3 minute. what is the total number if pins"
After juggling for several minutes i.e., 2.5 minutes and [tex]1\frac{1}{3}[/tex] minutes (mixed fraction), the total number of bowling pins by clown is 37 pins
As per the question statement, a clown juggles 12 bowling for the first 2.5 minutes then he bump it up to an average of 18 bowling pins per minute for the last [tex]1\frac{1}{3}[/tex] minute (Mixed Fraction form)
We are supposed to find the total number if pins by the clown.
Let's calculate the total time first that will be 2.5 minutes + [tex]1\frac{1}{3}[/tex] minutes
[tex]1\frac{1}{3} =\frac{3*1 +1}{3} =\frac{4}{3} =1.34[/tex] minutes.
Therefore total time = 3.84minutes
Given that he bumps it up to an average of 18 bowling pins per minute for the last [tex]1\frac{1}{3}[/tex] minute so, the number of pins in the last [tex]1\frac{1}{3}[/tex] minute will be = [tex]18*1.34 = 24.12 = 25[/tex] (approx.)
So total number of bowling pins = [tex]12+25 = 37[/tex] pins
Mixed Fraction: A mixed fraction is one that is represented by both of its quotient and remainder present in a single expression. A mixed fraction is, for instance, 2 1/3, where 2 is the quotient and 1 is the remainder.To learn more about such questions, click on the link given below:
https://brainly.com/question/2753661
#SPJ1
What two im i missing?
a cat on a table 960m views a piece of meat on the ground 114.4cm away from the foot of the table. find the angle of depression of the meat from the top of the table
The angle of depression of the meat from the top of the table is 40°
This situation makes a right-angle triangle with the height of table being the perpendicular to the right-angle triangle and the distance of meat from the foot of the table becomes the base of the imaginary right-angle triangle
to know the angle of depression of the meat from the top of the table
we need to find the ratio between the perpendicular and the base of the triangle to use trigonometry.
Tan is the ratio of perpendicular and base of the triangle
which is = 96/114.4
tan Ф=0.8392
To solve for Ф , a tan would move from the left-hand side to the right-hand side and would become tan inverse.
Ф = tan-1 0.8392
Ф = 40°
The correct question is a cat on a table 96cm views a piece of meat on the ground 114.4cm away from the foot of the table. find the angle of depression of the meat from the top of the table.
To know more about trigonometry - https://brainly.com/question/26719838
#SPJ9
Find the quotient of The quantity 30 times ten raised to the negative twenty fourth power end quantity divided by the quantity 5 times ten raised to the negative twenty fourth power end quantity.. Write the final answer in scientific notation.
6 x 1048
6 x 1024
6 x 100
6 x 10−48
The quotient of the given problem using laws of exponents is; 6 * 10⁰
How to use the law of exponents?We want to express the quotient of the quantity 30 times ten raised to the negative twenty fourth power end quantity divided by the quantity 5 times ten raised to the negative twenty fourth power end quantity.
This is;
(30 * 10⁻²⁴)/(5 * 10⁻²⁴)
Now, we can break this down into like terms to get;
(30/5) * (10⁻²⁴/10⁻²⁴)
= 6 * 1
Now, 1 can also be written as;
10⁰ = 1
Thus, the solution of the given problem is; 6 * 10⁰
Read more about Law of Exponents at; https://brainly.com/question/11761858
#SPJ1
Each square of a chess board measures 57 millimeters by 57 millimeters. There are 64 squares on a chess board. What is the area of the chess board?
Answer: 207936 millimeters squared
Step-by-step explanation:
57 * 57 = 3249
3249 * 64 = 207936
Answer: 207936 millimeters^2
Step-by-step explanation: 57*57=3249
3249 64 times is 207936.
this question has 2 parts:
Part A
Callie kicks a soccer ball from the ground. The height of the ball, in feet, above the ground t seconds after the ball is kicked can be represented by the expression 38t- 16t². Write the expression in factored form.
Part B
What is the height of the soccer ball 1.25 seconds after Callie kicks it?
______ feet
Part A The quadratic expression in factored form is 2t(19 - 8t)
Part B The height of the soccer ball 1.25 seconds after Callie kicks it is 22.5 ft
Part A Write the expression in factored form.Since Callie kicks a soccer ball from the ground. The height of the ball, in feet, above the ground t seconds after the ball is kicked can be represented by the expression 38t- 16t².
So, the expression is a quadratic expression, we have that h(t) = 38t- 16t².
To write the expression in factored form, we find the common factors of both terms and factor them out.
So, h(t) = 38t- 16t²
= 2 × 19 × t - 2 × 8 × t × t
Factoring out 2 and t, we have
= 2 × t × (19 - 8 × t)
= 2t(19 - 8t)
So, the quadratic expression in factored form is 2t(19 - 8t)
Part B What is the height of the soccer ball 1.25 seconds after Callie kicks it?Since the quadratic expression h(t) = 38t- 16t² represents the height of the ball above the ground in feet, to find the height of the ball after 1.25 second,we substitute t = 1.25 s into the expression.
So, h(t) = 38t- 16t²
h(1.25) = 38(1.25) - 16(1.25)²
h(1.25) = 47.5 - 16(1.5625)
h(1.25) = 47.5 - 25
h(1.25) = 22.5 ft
So, the height of the soccer ball 1.25 seconds after Callie kicks it is 22.5 ft
Learn more about quadratic expression here:
https://brainly.com/question/25841119
#SPJ1
(-4, 12) and (-7, -3) write an equation of the line in slope intercept form that passes through the points.
Answer:
The equation in slope-intercept form is: [tex]y=5x+32[/tex]
Step-by-step explanation:
To calculate the slope, [tex]m[/tex], we use the formula [tex]\frac{y_{2} -y_{1}}{x_{2}-x_{1} }[/tex] where [tex]y[/tex] are the [tex]y[/tex]-values of the points and [tex]x[/tex] are the [tex]x[/tex]-values.
Pugging our numbers into the formula, we get [tex]\frac{(-3)-12}{-7-(-4)}[/tex]. This simplifies to 5.
To calculate the [tex]y[/tex]-intercept, we first substitute one of our points into the formula. Substituting -4 and 12, we get [tex]12=5(-4)+b[/tex].
Then we can solve for [tex]b[/tex].
[tex]12=5(-4)+b[/tex]
[tex]12=-20+b[/tex]
[tex]32=b[/tex]
So, our slope is 32.
We can then plug these values into the slope-intercept form [tex]y=mx+b[/tex]
A hamburger and French fries cost $13. A hamburger and two sodas cost $14. A hamburger, French fries, and a soda costs $16. Write the system of equations that describes this situation, then solve to find the price of each. (PLEASE SHOW WORK)
The cost of each hamburger is $8, the cost of each French fry is $5 while the cost of each Soda is $3.
What is an equation?An equation is an expression that shows the relationship between two or more numbers and variables.
Let x represent the cost of hamburger, y represent the cost of french fries and z represent the cost of soda, hence:
x + y = 13 (1)
Also:
x + 2z = 14 (2)
And:
x + y + z = 16 (3)
From the three equations:
x = 8, y = 5, z = 3
The cost of each hamburger is $8, the cost of each French fry is $5 while the cost of each Soda is $3.
Find out more on equation at: https://brainly.com/question/13763238
#SPJ1
Simplify 12/16 to lowest terms and find an equivalent fraction that has a denominator of 32.
10/00
O
0 / 4
[tex]\cfrac{12}{16}\implies \cfrac{4\cdot 3}{4\cdot 4}\implies \cfrac{4}{4}\cdot \cfrac{3}{4}\implies 1\cdot \cfrac{3}{4}\implies \boxed{\cfrac{3}{4}}~\hfill \cfrac{8\cdot 3}{8\cdot 4}\implies \boxed{\cfrac{24}{32}}[/tex]
Jenkins Company uses a job order cost system with overhead applied to jobs on the basis of direct labor hours. The direct labor rate is $20 per hour, and the predetermined overhead rate is $15 per direct labor hour. The company worked on three jobs during April. Jobs A and B were in process at the beginning of April. Job A was completed and delivered to the customer. Job B was completed during April, but not sold. Job C was started during April, but not completed. The job cost sheets revealed the following costs for April:
Job A Job B Job C
Cost of Jobs in Process, April 1, Current Year $ 12,000 $ 1,000 $ 0
Direct Materials Used 2,000 8,000 9,000
Direct Labor 10,000 8,000 3,000
Applied Manufacturing Overhead ? ? ?
Required:
If no other jobs were started, completed, or sold, determine the balance in each of the following accounts at the end of April:
work in progress
finished goods
cost of goods sold
The work in process(Job C) is $14,250
The finished goods(job B) is $23,000
The cost of goods sold(job A) is $31,500
What are work in process, finished goods and cost of goods sold in this case?
The work in process refers to the total costs incurred on Job C, since it was not completed at the end of the month, the finished goods refers to the costs incurred on job B which has been completed but not yet sold and cost of goods sold means the cost incurred on Job A which has been sold since it has been completed.
Job A:
Cost of job in process=$12,000
direct materials used=$2,000
direct labor=$10,000
number of direct labor hours=direct labor cost/ direct labor rate
number of direct labor hours=$10,000/$20=500 hours
Applied Manufacturing Overhead=labor hours*predetermined overhead rate per direct labor hour
Applied Manufacturing Overhead=500*$15=$7,500
cost of goods sold=$12,000+$2,000+$10,000+$7,500
cost of goods sold=$31,500
Job B:
Cost of job in process=$1,000
direct materials used=$8,000
direct labor=$8,000
number of direct labor hours=direct labor cost/ direct labor rate
number of direct labor hours=$8,000/$20=400 hours
Applied Manufacturing Overhead=labor hours*predetermined overhead rate per direct labor hour
Applied Manufacturing Overhead=400*$15=$6,000
finished goods=$1,000+$8,000+$8,000+$6,000
finished goods=$23,000
Job C:
Cost of job in process=$0
direct materials used=$9,000
direct labor=$3,000
number of direct labor hours=direct labor cost/ direct labor rate
number of direct labor hours=$3000/$20=150 hours
Applied Manufacturing Overhead=labor hours*predetermined overhead rate per direct labor hour
Applied Manufacturing Overhead=150*$15=$2,250
work in progress=$0+$9,000+$3,000+$2,250
work in progress=$14,250
Find out more about job costing on:brainly.com/question/20910068
#SPJ1
E-7/9|12/5-6R|+50 > or equal to -30
The solution set of the inequality for R is given by [tex]-\frac{1172}{85} \leq x\leq \frac{1228}{55}[/tex] .
An inequality in mathematics is a relation that compares two numbers or other mathematical expressions in an unequal way. It is frequently used to compare two numbers on the number line based on their sizes. Different types of inequalities are represented by a variety of notations such as < ,> ,≤ and ≥.
The modulus function takes the absolute value of a function.
To solve the given inequality we have simplify the inequality first.
[tex]x-\frac{7}{9} |(\frac{12}{5} -6x)|+50\ge -30[/tex]
[tex]or, x-\frac{7}{9}\times \frac{6}{5} |(2-5x)|+50\ge -30\\or,x-\frac{14}{15}|2-5x|\ge-80\\[/tex]
Now we separate the inequalities:
[tex]x-\frac{14}{15}(2-5x)\ge-80[/tex] for 2x-5 ≥ 0
[tex]x-\frac{14}{15}(-(2-5x))\ge-80[/tex] for 2x-5 ≤ 0
Now we will solve the two inequalities separate and find the intersection.
[tex]x-\frac{14}{15}(2-5x)\ge-80\\or,15x-28+70x\ge-1200\\or,x\ge -\frac{1172}{85}[/tex]
Again
2x-5 ≥ 0
or, [tex]x\le\frac{2}{5}[/tex]
hence [tex]-\frac{1172}{85}\le x\le\frac{2}{5}[/tex]
Similarly solving the other inequality we get
[tex]\frac{2}{5}\le x\le\frac{1228}{55}[/tex]
Now we find the intersection of the two inequalities:
[tex]-\frac{1172}{85}\le x\le\frac{1228}{55}[/tex]
To learn more about inequalities visit:
https://brainly.com/question/20383699
#SPJ9
Solve the quadratic equation 2h^2 + 100 = 0. If there is more than one solution, separate them with commas. If there are no solutions type DNE.
Answer:
h=sqrt2*5i, h=-sqrt 2*5i
Step-by-step explanation:
Answer:
DNE
No real solutions
Step-by-step explanation:
This Quadratic Equation: 2h² + 100 = 0
Factor out the common term 2:
subtract x^2+8x from -3x^2-3x-7.
Answer: -4x²-11x-7
Step-by-step explanation:
[tex]-3x^2-3x-7-(x^2+8x)=\\-3x^2-3x-7-x^2-8x=\\-4x^2-11x-7[/tex]
sorry for the blurry photo
A- -10
B- 15
C- 10
D- -15
Answer: 15
Explanation:
The length of the segment is 10 plus 5 which is fifteen because you need to know how long it is. Just ignore the negatives.