PLEASE Name five elements of the Periodic Table and name three properties for each element listed. For example, Oxygen: polarity.

A+bare+helium+nucleus+has+two+positive+charges+and+a+mass+of+6.64+10-27+kg.+  7.57×105 eV.

When you look at a photograph of a cell, the nucleus is among the elements that is most evident. The nucleus, located in the centre of the cell, is home to all of the chromosomes, which are responsible for encoding the genetic material. Consequently, it is crucial to safeguard this area of the cell.

The membrane that surrounds the nucleus maintains all of the chromosomes inside and distinguishes between the chromosomes being inside the nucleus and the other organelles and parts of the cell remaining outside. There are pores in the nuclear membrane that enable molecules to enter and exit the nucleus as necessary, such as when RNA needs to move between the nucleus and the cytoplasm.

to learn more about nucleus from the given link:

https://brainly.com/question/141626

#SPJ4

The ph of the resulting solution Ka = 1.8x10-5 /0.036-x

The e letters pH stand for the potential of hydrogen since pH is effectively a measure of the concentration of hydrogen ions.

a solution is a special type of homogeneous mixture composed of two or more substances.

3 ml x 3.00 M = 250 ml * x M

x = 0.036 M HAc

Ka = 1.8x10-5 /0.036-x

For more information on ph click on the link below:

https://brainly.com/question/22390063

#SPJ4

In Dalton Theory  the atom of the same element has same mass found also wrong because some elements show different atoms having different masses.

That postulate of the Dalton atomic theory was changed that atom is indivisible particle and can be subdivided into smaller particles was later changed and then this statement comes forward that because the atoms can be divided into three more particles which are electron, proton and neutron.

1. The first statement of the Dalton's theory got wrong because due to the indivisibility of the atom.

2. The atom is the smallest particle also found wrong because the atom is further divided in the proton, electron and neutron.

3. The atom of the same element has same mass found also wrong because some elements show different atoms having different masses.

So we can conclude that in Dalton theory  the atom of the same element has same mass found also wrong because some elements show different atoms having different masses.

Learn more about Dalton Atomic Model here: https://brainly.com/question/13157325

#SPJ1

The value of the gold in the ring is $78.50.

m(ring) = 12.41 g; mass of the ring

m(Au) = 0.583 × 12.41 g

m(Au) = 7.235 g; the mass of gold in the ring

m(Au) = 7.235 g × 0.0352 g/ounce

m(Au) = 0.255 ounce

value = 0.255 ounce × $308.00/ounce

value = $78.50; the value of the gold in the ring

Karat is a measure of the purity of gold.  A gold karat is 1/24 part of the whole.

Gold is very ductile and can be drawn into a monoatomic wire or used in the production of rings.

More about karat: brainly.com/question/13808328

#SPJ4

Answer:

Structure:

Differences-  A polymer is a collection of a large number of molecules whereas a monomer is a single molecule.

A monomer is a single molecule, which has the ability to chemically bond with other monomers in a long chain. A polymer is a chain that is made when monomers bind with other monomers.

Similarities-  They are both molecules

Properties:

Differences- Monomers have polyfunctionality, which is the capacity to form chemical bonds to at least two other monomer molecules. Polymers are chemically unreactive, solids at room temperature, malleable, tough, and are electrical insulators.

Similarities- They both makeup larger forms of matter.

Intermolecular Forces

Differences: Polymers are held together by covalent bonds, hydrogen bonds, and dispersion bonds. Monomers are only held together by hydrogen bonds.

Similarities: They can both be bonded together by hydrogen bonds.

1.463×10²² atoms of carbon are present in carbon tetrabromide.

m(CBr₄) = 8.06 g; mass of carbon tetrabromide

M(CBr₄) = 331.63 g/mol; molar mass of carbon tetrabromide

n(CBr₄) = m(CBr₄) ÷ M(CBr₄)

n(CBr₄) = 8.06 g ÷ 331.63 g/mol

n(CBr₄) = 0.0243 mol; amount of carbon tetrabromide

There is one carbon atom in one molecule of carbon tetrabromide: n(CBr₄) : n(C) = 1 : 1

n(C) = 0.0243 mol; amount of carbon atom

N(C) = n(C) × Na.

N(C) = 0.0243 mol × 6.022·10²³ 1/mol.

N(C) = 1.463×10²² atoms of carbon in carbon tetrabromide

Na - Avogadro constant or Avogadro number.

More about atom: brainly.com/question/11935748

#SPJ4

The wasteful side reaction of o2 with rubisco takes place under increased temperature and intense light conditions.

In the Calvin cycle, photorespiration refers to the chemical reaction that takes place between enzyme rubisco and oxygen by using ATP under light conditions and increased temperature.

The resultant products of this reaction are phosphoglycolate and PGA.

Moreover, phosphoglycolate and PGA can not be utilized for the synthesis of RUBP instead these newly manufactured compounds are processed into a 3-PGA reaction to continue the Calvin cycle where they are consumed to generate glycolate which is ultimately transformed into glycerate.

To put it simply, photorespiration is a reaction in which oxygen combines with rubisco to form 3-PG and 2 phosphoglycolates.

If you need to learn more about rubisco click here:

https://brainly.com/question/13735126

#SPJ4

The average  atomic mass of the element = 14.0135 amu and the element is Nitrogen

14.00 × 98.632 % + 15.00 × 1.3668 %

= 1,401.35 %

average atomic mass = [tex]\frac{1401.35}{100}[/tex]

             = 14.0135 amu

Isotopes are part  of a family of an element that  have all  the same number of protons but different numbers of neutrons. The number of protons in a nucleus defines the element's atomic number on the Periodic Table.  Taking example, carbon  is having  six protons and it's atomic number 6.

The average atomic mass (generally known as  atomic weight) of an element is the weighted average mass of the atoms in a naturally participating  sample of the element. Average masses are generally determined  in unified atomic mass units (u), where 1 u is equal to one-twelfth of  the mass of a neutral atom of carbon-12.

Learn more about atomic mass :

brainly.com/question/24666479

#SPJ9

The weight of the column is 1273.85 pounds.

r = 370 mm/2 = 185 mm

r = 0.185 m; a radius of a concrete column

l = 2.2 m; a length of a concrete column

d = 2.45 Mg/m³; density of a concrete

V = r² × π × l

V = (0.185 m)² × 3.14 × 2.2 m

V = 0.236 m³; volume of a column

m = d × V

m = 2.45 Mg/m³ × 0.236 m³

m = 0.578 Mg

1 Mg = 1000 kg

m = 578.2 kg; mass of concrete

W = 578.2 kg × 9.8 m/s²

W = 5666.36 N

W = 5666.36 N × 0.225 Ibf/N

W = 1273.85 Ibf; weight of a concrete

The weight of an object is the amount of force acting on the object due to gravity. SI unit for weight is newton (N).

More about weight: brainly.com/question/17306051

#SPJ4

When water molecules interact, the positively charged hydrogen end of one molecule is attracted to the negatively charged oxygen end of another molecule.

Hydrogen bonding is a type of dipole-dipole attraction between molecules, it was not all the time that a covalent bond to a hydrogen atom.

The attractive force will be very strong between a hydrogen atom and the electronegative atoms i.e., N, O, or F atom, etc., as it was covalently bonded to electronegative atom.

Any molecule that has a hydrogen atom directly attached to an oxygen or nitrogen atom is capable of hydrogen bonding. When hydrogen is bonded to fluorine, the attraction of covalent bond was very well.

So, When water molecules interact, the positively charged hydrogen end of one molecule is attracted to the negatively charged oxygen end of another molecule.

Thus, the answer is positively and negatively respectively.

Learn more about Hydrogen bonding,

https://brainly.com/question/10904296

#SPJ4

The empirical formula of the compound is [tex]CH_{4}N[/tex].

We calculate the empirical formula by calculating the mass of every individual element in the compound and then calculating the corresponding moles.

0.458 g CO2 / 44 g/mol = 0.0104 mol ⇒ 0.0104 mol of C ⇒ 0.0104 mol x 12 g/mol = 0.125 g of C

0.374 g H2O / 18 g/mol = 0.0208 mol ⇒ 0.0416 mol of H ⇒ 0.0416 mol x 1 g/mol = 0.0416 g of H

0.486 g : 0.226 g = 0.312 g : X

X = 0.145 g of N

0.145 g / 14 g/mol = 0.0104 mol of N

0.0104 mol of C
0.0416 mol of H
0.0104 mol of N

When divided by 0.0104 mol, we get the C : H : N ratio of 1 : 4 : 1, giving us the empirical formula of [tex]CH_{4}N[/tex].

You can learn more about empirical formulas here:
brainly.com/question/14425592

#SPJ4

With no additional bracing needed, the maximum length of the stem utilized for pendant lightning is 12 in. (300 mm) or less. Lateral braces or an explosive flexible coupling must be utilized within 12 inches of the lightning fixture if the length is greater than 12 inches.

If you're planning on installing pendant lighting in your home, you'll need to be aware of the maximum length of the stem that can be used. According to the National Electric Code, the maximum length of the stem for pendant lighting is 12 inches (300 mm) or less. If the length of the stem is greater than 12 inches, you'll need to use lateral braces or an explosive flexible coupling within 12 inches of the lightning fixture. This will help to ensure the safety of your home and prevent any damage from occurring.

Learn more on stem here:

https://brainly.com/question/28181080

#SPJ4

The maximum number of significant figure of the reading obtained in the thermometer is 3.

Significant figures are used to establish the number which is presented in the form of digits.

A significant figure is a figure or a digit that contributes to how accurately something can be measured.

For the given thermometer, the reading of the digits is in 2 significant figure and the calibration is in one digit.

combining the 2 digits of reading and 1 digit calibration gives 3 significant figures.

Thus, the maximum number of significant figure of the reading obtained based on the calibration of the thermometer is 3.

Learn more about significant figures here: https://brainly.com/question/24491627

#SPJ1

Explanation:

b) .000035

f) .000005

g) .000000009823

i) .00026

j) 800000000

Yes, the reaction will occur .

Al2(SO4)3+3Pb(No3)2  →3PbSO4+2Al(NO3)3.

We use the (aq) mark to indicate a substance dissolves if it is soluble. We employ the (s) label with a substance and anticipate that it will precipitate out of solution if it is not soluble. There won't be any expected reaction if everything is solvable.

When aqueous solution of lead (II) nitrate and aluminium chloride are combined, lead(II) chloride will precipitate.

To learn more about Reaction refer

https://brainly.com/question/17434463?

#SPJ4

0.8 is the density of an unknown gas in g/l that has a volume of  10.9 l and  has a mass of 8.72 g.

What is density?

The definition of a material's density is the mass per unit volume of that substance. The ratio of mass to volume is known as density, or mass per unit volume. It calculates an object's material content in relation to its volume (cubic metre or cubic centimeter). Density is essentially a measurement of how tightly matter is packed.
Mass of the unknown gas = 8.72g

Volume of the gas = 10.9 l

Density of the gas = mass/volume = 8.72/10.9 g/l = 0.8g/l.

Thus, An unidentified gas with a volume of 10.9 l and a mass of 8.72 g has a density of 0.8 in g/l.

To learn more about density from the given link below,

https://brainly.com/question/18019548

#SPJ4

Molecules which increase neurotransmitter formation and release are termed as calcium.

The release of neurotransmitter molecules is triggered by an increase in calcium. When a neuron becomes depolarized and reaches a threshold, it sends an electrical signal called the action potential down the axon. When the action potential reaches the terminal, voltage gated calcium channels open. This causes an influx of calcium, which binds to proteins and allows the fusion of neurotransmitter-filled vesicles with the membrane. This results in the release of increased level of neurotransmitter into the synapse, where it can cause changes in the postsynaptic cell.

What are Neurotransmitters?

Neurotransmitters are chemicals that neurons release in order to communicate with other neurons or effector tissues such as muscle. There are various types of neurotransmitters, each with a unique effect on the postsynaptic cell.

Find more on neurotransmitters at : brainly.com/question/26387085

#SPJ4

Density = mass/volume

  ρ=[tex]=m/v[/tex]

density = 4.726/128.9

density = 0.0366 g/cm3.

The term "density" refers to the quantity or mass per unit of volume in a particular substance. Mass divided by volume is the formula for calculating density.

Absolute density and relative density are the two main types of density. Relative density, also known as specific gravity, is the ratio of a substance's density to the density of a reference material. The reference substance is often water.

The formula to calculate density is the mass of an object divided by its volume. The standard units are kg/m3.

To learn more about density from the given link:

brainly.com/question/15164682

#SPJ4

This rule is used to quickly determine protonation, and hence charge state, and is extremely important to know (and easy to derive).

In many stoichiometric and catalytic reactions, protonation—a fundamental chemical reaction—takes place as a first step. Many biological macromolecules, including certain ions and molecules that can undergo more than one protonation, are classified as polybasic. Most acid-base reactions result in protonation and deprotonation (the removal of a proton), which are at the center of most theories relating to these reactions.

An element that protonates another element is referred to as a Brnsted-Lowry acid. In some analytical processes, such as electrospray mass spectrometry, protonation of a substrate is a necessary step since it causes the species' mass and charge to both increase by one unit. In addition to changing the charge and mass of a molecule or ion, protonation and deprotonation can also alter many other chemical properties.

To learn more about protonation from the given link:

https://brainly.com/question/15215343

#SPJ4

1 molecule of glutamate can form 7.6 ATP can be formed by oxidative phosphorylation .

In the process of oxidative phosphorylation, oxygen is consumed as electrons are transferred through the mitochondrial electron transport chain and ATP is produced.

The bulk of the ATP required for higher animals and plants to sustain life is produced by oxidative phosphorylation, which is also in charge of creating and preserving metabolic equilibrium.

The glutamate carrier recycles glutamate outside of mitochondria (T9). One aspartate and 7.6 ATP are made at the best return for each glutamine.

To learn more about oxidative phosphorylation, refer to the below link:

https://brainly.com/question/25765324

#SPJ4

The pH of given  solution is 8.77. It can be calculated by the pka value of NH₄/NH₃ and molar concentrations of both the ionic compounds.

A solution containing 0.12 NH₄Cl and 0.03 moles of NaOH undergoes a reaction in which NaOH reacts with NH₄Cl to form NaCl, producing NH₃ and H₂O.

NH₄Cl + NaOH = NH₃ + NaCl + H₂O

The pH is therefore equal to the sum of the pKa and the logarithm of the base concentration divided by the acidity. In both cases the base concentration is 0.03 molar. When sodium hydroxide is added, 1 mole of ammonia is produced for each mole added. The result is less ammonium with each addition of hydroxide.

This is how we come to a solution.

pH = pKa + log [base]/log [acid]

pH = 9.25 + log 0.03/log 0.12

pH = 8.77

To learn more on Calculation of pH, please refer:

Brainly.com/question/28343443

#SPJ4

The expected value of the total volume of the liquuid in the test tube is 23 mL

From the question given above, the following data were obatined:

The total volume of the liquid in the test tube can be obtained by adding the volume of the red liquid and the volume of the liquid in the test tube together. This is illustrated below:

Total volume = Volume of red liquid + volume of liquid in test tube

Total volume = 14 + 9

Total volume = 23 mL

Thus, we can conclude that the expected value of the total volume of the liquid is 23 mL

Learn more about volume:

https://brainly.com/question/9523268

#SPJ1

Anisotropic azobenzene materials are photoresponsive materials, very important in photochemistry.

The π-conjugated system and ring-substitution in azobenzene gives specific absorption in the UV-visible range of the spectrum.

Anisotropy is the property of a material which allows it to assume different properties in different directions.

Azobenzene is an aromatic molecule where two phenyl rings are connected with azo bond (–N=N–); see the picture below.

Azobenzene has the mesogenic property.

Anisotropic azobenzene materials have photoresponsive properties such as birefringence, phase transition, photoinduced colloidal deformation, surface-relief-gratings, bending, spontaneous surface pattern and dichroism.

The spectra of the cis- and trans-azobenzenes are distinct but overlapping.

More about isotropic: brainly.com/question/13045529

#SPJ4

The speed of the fluid in the pipe through the cross-section of 0.105 m² is 5.21 m/s.

The area of the first cross-section is A1.

A1 = 0.70 m²

The area of the second cross-section is A2.

A2 = 0.105 m²

The velocity of the fluid at the first cross-section is V1.

V1 = 3.50 m/s

Let the velocity of the fluid at the second cross-section be V2.

The speed of the fluid in the pipe through the cross-section of 0.105 m² is,

Area of the first cross-section × Velocity of the fluid through the first cross-section = Area of the second cross-section × Velocity of the fluid through the second cross-section

A1 × V1 = A2 × V2

0.070 × 3.50 = 0.047 × V2

[tex]V2 = \frac{0.070 × 3.50}{ 0.047} [/tex]

= 5.21 m/s

Therefore, the speed of the fluid in the pipe through the cross-section of 0.105 m² is 5.21 m/s.

To know more about velocity, refer to the below link:

https://brainly.com/question/16379705

#SPJ4

The molecular geometry is seesaw.

The molecule has the seesaw geometry when it has the central atom with four single bonds with other atoms and one lone pair of electrons (AX4E1 in AXE notation).

VSEPR theory (The Valence Shell Electron Pair Repulsion Theory) uses the AXE notation.

The seesaw geometry is similar to a trigonal bipyramid.

Difference is that in the seesaw geometry one of the atoms is replaced by a lone pair of electrons.

A lone pair of electrons in the seesaw geometry is always in an equatorial position (see the picture below).

Some examples of the molecules with seesaw geometry are sulfur tetrachloride (SF4) and sulfur tetrafluoride (SF4).

More about bond angles: brainly.com/question/25425872

#SPJ4

Answer:

We know that the forces are added if they are in the same direction and they are subtracted if they are in opposite directions. So, the net force = 10 N (North) + 10 N (North) = 20 N (North) and 8 N (West) - 8 N (East) = 0. Therefore the net force on the block is 20 N in the North direction.

Answer:

63.6 g/mol

Explanation:

If the percent abundance of Cu-63 is 69.1%, then Cu-65 is 30.1% since

100%-69.1%= 30.1%

To find the average atomic mass, multiiply the percentage with the corresponding mass then add the answers together.

(63 x 69.1%) + (65 x 30.1%) = average atomic mass

(63 x .691) + (65 x .301) = 43.533 + 20.085 = 63.618 g/mol = 63.6 g/mol