pls pls help asap... im not very good at math

The point on the y-axis that lies on the line passing through point g and is parallel to line df is (0, 9).

To find the point on the y-axis that lies on the line passing through point g and is parallel to line df, we first need to determine the slope of line df. Since the line is parallel to the new line passing through point g, the slope will be the same.

Once we have the slope, we can use point-slope form to find the equation of the new line. Then, we can set x=0 (since we want to find the point on the y-axis) and solve for y to find the y-coordinate of the point.

So, let's begin.

First, let's find the slope of line df. We can use the formula:

slope = (y2 - y1) / (x2 - x1)

where (x1, y1) and (x2, y2) are any two points on the line. We can use the points d and f, which are (5, 3) and (10, 8), respectively.

slope = (8 - 3) / (10 - 5) = 1

So the slope of line df is 1.

Now, using point-slope form, we can find the equation of the new line passing through point g (which is (-2, 7)) and having a slope of 1. The formula for point-slope form is:

y - y1 = m(x - x1)

where m is the slope and (x1, y1) is any point on the line (in this case, point g). Substituting in our values, we get:

y - 7 = 1(x - (-2))
y - 7 = x + 2
y = x + 9

So the equation of the new line is y = x + 9.

To find the point on the y-axis that lies on this line, we set x=0:

y = 0 + 9
y = 9

So the point on the y-axis that lies on the line passing through point g and is parallel to line df is (0, 9).

to learn more about equation click here:

brainly.com/question/2228446

#SPJ11

Answer:

18/25= 72%

Step-by-step explanation:

total writing utensils = 25

add red utensils ( 5 pencils + 9 markers) = 14 plus 4 markers = 18

18/25= 72%

The current utilization of the road is 0.5833 or 58.33%. To calculate the current utilization of the road, we need to use the formula:

Utilization = Arrival rate x Drive time

Since we are assuming Poisson arrival and exponential drive times, we can use the following formulas:

Arrival rate = λ = 35 cars per hour
Drive time = 1/μ = 1/60 hours (since the drive time is 1 minute)

Therefore,

Utilization = 35 cars per hour x (1/60 hours)
Utilization = 0.5833 or 58.33%

So the current utilization of the road in Mountainside Village is 58.33%.
Hi! As the transportation director of Mountainside Village, we can calculate the current utilization of the road using the given terms. The peak traffic rate is 35 cars per hour, and the drive time without traffic is 1 minute (or 1/60 hours).

Since we're assuming Poisson arrival and exponential drive times, we can calculate the utilization (ρ) using the formula:

ρ = λ / μ

Here, λ represents the arrival rate (35 cars/hour), and μ represents the service rate, which is the inverse of the average drive time (1/60 hours).

So, μ = 1 / (1/60) = 60 cars/hour

Now, we can calculate the utilization:

ρ = 35 cars/hour / 60 cars/hour = 0.5833 (rounded to 4 decimal places)

Thus, the current utilization of the road is 0.5833 or 58.33%.

Visit here to learn more about exponential brainly.com/question/28596571

#SPJ11

This results in a probability of approximately 0.044, or 4.4%.  the probability of any number of eagles surviving their first year can be calculated using the binomial probability formula.

The probability of a bald eagle surviving its first year of life is 62%. If 45 bald eagles are randomly selected, we can use the binomial probability formula to calculate the probability of a certain number of eagles surviving their first year.

P(x=k) = (n choose k) * p^k * (1-p)^(n-k)

Where n is the total number of trials (45), k is the number of successes (surviving eagles), p is the probability of success (0.62), and (n choose k) is the binomial coefficient.

To find the probability that exactly 20 eagles survive their first year, we plug in the values:

P(x=20) = (45 choose 20) * 0.62^20 * 0.38^25

This results in a probability of approximately 0.044, or 4.4%.

To know more about Probability Visit:

https://brainly.com/question/30034780

#SPJ11

1. Pick a random starting point in the table and read four digits.

This is the step in selecting a random sample by this procedure

What is sample?

In statistics, a sample refers to a group of individuals, objects, or events that are selected from a larger population to represent that population. Sampling is the process of selecting a subset of individuals or items from a larger population in order to infer something about the whole population.

The step in selecting a random sample by the procedure described in the scenario is step 1: Pick a random starting point in the table and read four digits. This step ensures that the selection of horses is entirely random, with each horse having an equal chance of being chosen. By starting at a random point in the table and selecting the first four digits, the veterinarians are eliminating any possible bias in the selection process. The subsequent steps involve using the selected four digits to determine if they correspond to a horse ID, discarding any sequences that do not match, and repeating the process until the desired sample size is reached.

To learn more about sample visit:

https://brainly.com/question/27829028

#SPJ4

We will use the future value of a series formula to solve this problem. The terms you want me to include are invests, investment, and compounded.

Here's a step-by-step explanation:

1. Bill invests $160 at the start of each month for 22 months. This is a regular investment, and we will treat it as an ordinary annuity.

2. The investment yields 0.5% per month, compounded monthly. We'll convert the percentage to a decimal by dividing it by 100, so the monthly interest rate (r) is 0.005.

3. We will use the future value of an ordinary annuity formula to find the value of the investment at the end of 22 months:

FV = P * [(1 + r)^n - 1] / r

Where FV is the future value of the investment, P is the monthly investment ($160), r is the monthly interest rate (0.005), and n is the number of months (22).

4. Plug in the values and calculate:

FV = 160 * [(1 + 0.005)^22 - 1] / 0.005

FV = 160 * [(1.005)^22 - 1] / 0.005

FV = 160 * [1.113688 - 1] / 0.005

FV = 160 * 0.113688 / 0.005

FV = 3,627.232

The value of Bill's investment at the end of 22 months is approximately $3,627.23.

Learn more about future value here: brainly.com/question/14860893

#SPJ11

a) The perimeter of the shape is 10π.

b)  The expression for the perimeter of the shape in terms of x and π is  (5/2)πx.

The shape consists of a quarter circle with radius x, and two semicircles with radius x as well.

a) To find the perimeter of the shape when x = 4, we need to first find the length of each component of the shape.

The quarter circle has an arc length of one-fourth the circumference of a circle with radius x, which is:

arc length = (1/4) × 2πx = (1/2)πx

The two semicircles each have a circumference of half the circumference of a circle with radius x, which is:

circumference = πx

Therefore, the total perimeter of the shape is:

perimeter = arc length + 2 × circumference

= (1/2)πx + 2πx

= (5/2)πx

When x = 4, the perimeter of the shape is:

perimeter = (5/2)π(4) = 10π

b) To write an expression for the perimeter of the shape in terms of x and π, we use the same calculations as above:

arc length = (1/2)πx

circumference = πx

Therefore, the perimeter of the shape is:

perimeter = arc length + 2 × circumference

= (1/2)πx + 2πx

= (5/2)πx

So the expression for the perimeter of the shape in terms of x and π is:

perimeter = (5/2)πx

for such more question on perimeter

https://brainly.com/question/23875717

#SPJ11

Noah needs 195 cups of cinnamon and 130 cups of nutmeg to make 130 pounds of spiced pecans.

Noah is not correct in claiming that he has enough spices to make 130 pounds of spiced pecans.

To begin with, let's look at the recipe Noah uses. He mixes 1/2 cup of cinnamon and 1/3 cup of nutmeg to make 1/6 cup of the spice mixture.

=>  1/3 + 1/6 = (2 +1)/ 6 = 3/6 = 1/2

So, the amount of cinnamon required would be

=> 130*(1/2) = 195 cups or 15 3/4 quarts.

Similarly, the amount of nutmeg required would be

=> 130 * 1 = 130 cups or 10 1/4 quarts.

Now, let's see if Noah has enough spices to make 130 pounds of spiced pecans. We can add the amount of cinnamon and nutmeg required, which is

=> 195 cups + 130 cups = 325 cups (or 26 quarts).

This is more than the amount of spices Noah has, which is only 2 quarts.

Therefore, Noah is not correct in claiming that he has enough spices to make 130 pounds of spiced pecans. He would need more than 12 times the amount of spices he currently has in order to make that amount.

To know more about mixture here

https://brainly.com/question/23014

#SPJ4

To find the percentage of commuters who take more than 45 minutes to get to school, we need to calculate the z-score first:

z = (45 - 32) / 11 = 1.18

Using a standard normal distribution table or calculator, we can find that the percentage of commuters who take more than 45 minutes to get to school is approximately 12.22%.

To find the time for the fastest 20% of all commuters to school, we need to calculate the z-score for the 20th percentile:

z = invNorm(0.2) = -0.84

The time for the fastest 20% of all commuters can be calculated using the formula:

x = μ + zσ = 32 + (-0.84) * 11 = 22.36 minutes

Therefore, the time for the fastest 20% of all commuters to school is approximately 22.36 minutes.

The 68-95-99.7% rule states that for a normally distributed data set, approximately 68% of the data falls within one standard deviation (σ) of the mean (μ), approximately 95% of the data falls within two standard deviations of the mean, and approximately 99.7% of the data falls within three standard deviations of the mean.

Since we know that the mean time to commute to school is 32 minutes with a standard deviation of 11 minutes, we can apply the 68-95-99.7% rule to find the range of time for 95% of commuters:

Within one standard deviation (σ) of the mean (32 ± 11), approximately 68% of commuters take between 21 and 43 minutes to get to school.

Within two standard deviations of the mean (32 ± 2*11), approximately 95% of commuters take between 10 and 54 minutes to get to school.

Therefore, the statement "this shows us that 95% of the time to commute will be between 10 and 54 minutes to get to school" is correct.

To determine the longest 1% of the time to commute to school, we need to calculate the z-score for the 99th percentile:

z = invNorm(0.99) = 2.33

The longest 1% of the time to commute to school can be calculated using the formula:

x = μ + zσ = 32 + (2.33) * 11 = 57.63 minutes

Therefore, the longest 1% of the time to commute to school is approximately 57.63 minutes.

Learn more about standard normal distribution, here:

brainly.com/question/30404390

#SPJ11

The 99% confidence interval for the true proportion of people who prefer x to y is approximately (0.4163, 0.5637).

To calculate the 99% confidence interval for the true proportion of people who prefer x to y, we'll use the following steps:

1. Find the sample proportion (p-hat): Divide the number of people who prefer x by the total number of people surveyed.
p-hat = 147/300 ≈ 0.49

2. Determine the sample size (n): In this case, the researcher surveyed 300 people, so n = 300.

3. Find the standard error (SE) of the proportion: SE = sqrt((p-hat * (1 - p-hat)) / n)
SE ≈ sqrt((0.49 * 0.51) / 300) ≈ 0.0286

4. Identify the 99% confidence level (z-value): For a 99% confidence interval, the z-value is 2.576 (from the standard normal distribution table).

5. Calculate the margin of error (ME): ME = z-value * SE
ME = 2.576 * 0.0286 ≈ 0.0737

6. Determine the lower and upper bounds of the 99% confidence interval:
Lower Bound = p-hat - ME ≈ 0.49 - 0.0737 ≈ 0.4163
Upper Bound = p-hat + ME ≈ 0.49 + 0.0737 ≈ 0.5637

So, the 99% confidence interval for the true proportion of people who prefer x to y is approximately (0.4163, 0.5637).

to learn more about confidence interval click here:

brainly.com/question/28969535

#SPJ11

The smallest irrational number from the given set of irrational numbers  is -√27

To determine the smallest irrational number from the given options, we need to identify which numbers are irrational. A rational number is any number that can be expressed as a ratio of two integers, while an irrational number cannot.

√5 is an irrational number because it cannot be expressed as a ratio of two integers. Similarly, -√27 is also irrational, since it cannot be expressed as a ratio of two integers.

√25, on the other hand, is a rational number because it equals 5 which can be expressed as a ratio of two integers, 5/1. 1/4 is also a rational number since it equals 0.25, which can be expressed as a ratio of two integers, 1/4. 0.2345678... appears to be a decimal expansion that goes on indefinitely, but it is rational since it can be expressed as a ratio of two integers by finding the pattern of the repeating digits.

Therefore, the smallest irrational number from the given options is -√27 since it is the only negative irrational number and has the smallest absolute value among the irrational numbers given.

To learn more about irrational number click on,

https://brainly.com/question/29259282

#SPJ1

The area of the parallelogram with vertices K(1,2,3), L(1,3,6), M(3,8,6), and N(3,7,3) is approximately 29.1547.

To find the area of the parallelogram, we need to find the length of one of its base vectors and the perpendicular height.

Let's first find one of the base vectors. We can take KL or MN as the base vector. Let's take KL.

The vector KL = L - K = (1, 3, 6) - (1, 2, 3) = (0, 1, 3).

Next, we need to find the perpendicular height of the parallelogram. We can do this by finding the cross-product of KL and KM, and then taking its magnitude.

The vector KM = M - K = (3, 8, 6) - (1, 2, 3) = (2, 6, 3).

Taking the cross product of KL and KM, we get:

KL x KM = |i j k|

|0 1 3|

|2 6 3|

= i(18) - j(6) + k(-2)

= (18, -6, -2)

The magnitude of KL x KM is:

[tex]|KL x KM| = √(18^2 + (-6)^2 + (-2)^2) = √(340) = 2*√(85)[/tex]

Therefore, the area of the parallelogram is:

Area = base x height = |KL| x |KL x KM| = [tex]√(0^2 + 1^2 + 3^2) * 2√(85) = 2√(10)√(85) = 2√(850) ≈ 29.1547[/tex]

So, the area of the parallelogram with vertices K(1,2,3), L(1,3,6), M(3,8,6), and N(3,7,3) is approximately 29.1547.

To know more about parallelograms, visit the link given below:

https://brainly.com/question/29147156

#SPJ4

Full Question: The Area of the Parallelogram with Vertices k(1,2,3), l(1,3,6), m(3,8,6), and n(3,7,3) is √265.

The process of determining the effect of changing objective function coefficients, right-hand side values of constraints, and decision variable values on a linear program is known as sensitivity analysis.

Sensitivity analysis helps to understand how changes in the input parameters affect the optimal solution of a linear program. By analyzing the sensitivity of the solution to changes in the parameters, decision-makers can gain insight into the behavior of the model and make more informed decisions.

Sensitivity analysis involves computing the range of values over which the current optimal solution remains optimal, known as the range of optimality. It also involves computing the shadow prices, which indicate the change in the optimal objective function value per unit change in the right-hand side of a constraint. The shadow prices can help decision-makers understand the value of additional resources or the cost of resource shortages.

for such more question on sensitivity analysis

https://brainly.com/question/13266122

#SPJ11

When testing a hypothesis about a population proportion with a sample size greater than 100, the proper test statistic to use is the z statistic. Option (a)

The z statistic is the appropriate test statistic to use when testing a hypothesis about a population proportion and the sample size is over 100. This is because the central limit theorem applies, which states that as the sample size increases, the sampling distribution of the sample proportion becomes approximately normal.

Therefore, the test statistic can be calculated as the difference between the sample proportion and the hypothesized population proportion, divided by the standard error of the sampling distribution. The z score can then be compared to the critical values or p-values from the standard normal distribution to determine the level of statistical significance and make conclusions about the hypothesis being tested.

Learn more about z statistic.

https://brainly.com/question/30904553

#SPJ4

Full Question:  if You are testing a hypothesis about a population proportion and a sample size is over 100 what is the proper test statistic to use?

A) z statstic

B) chi-square

c) t statistic

d) not enough data

The third side of a triangle must be an integer, so the smallest possible integer solution is 5.

There are infinitely many possible third side lengths for a triangle with sides of length 5.3 and 0.4. To determine the third side length, we need to use the triangle inequality theorem, which states that the sum of any two sides of a triangle must be greater than the third side.

Thus, we have two inequalities:

0.4 + x > 5.3

5.3 + x > 0.4

Simplifying each inequality, we get:

x > 4.9

x > -4.9

The third side must be an integer, so the smallest possible integer solution is 5. Therefore, the length of the third side is 5 units.

Learn more about triangles

https://brainly.com/question/27996834

#SPJ4

If 2 similar "rectangular" shaped prisms have surface-area as 112 cm² and 1008 cm², then base perimeter of larger prism is 36 cm.

In order to calculate the Perimeter, we first calculate the "scale-factor" "k",

The "Scale-Factor" "k" is defined as the ratio of area of two figures which are similar,

So, (area of small rectangular prism)/(area of large rectangular prism) = k²,

Substituting the values of "Area",

We get,

⇒ k² = 112/1008,

⇒ k = 1/3,

Now, we use this "scale-factor" to find the value of the length and width of the "large-rectangular-prism".

For the length:

⇒ (length of small rectangular prism)/(length of large rectangular prism) = k,

⇒ 4/x = k,

⇒ 4/x = 1/3,

⇒ x = 12 cm.

For the width,

⇒ (width of small rectangular prism)/(width of large rectangular prism) = k,

⇒ 2/y = 1/3,

⇒ y = 6.

We know that the Perimeter(P) of base of Larger-Prism is calculated by the formula : 2l + 2w,

Substituting the values of Length(l) = 12 cm and width(w) = 6 cm,

We get,

⇒ Perimeter = 2×12 + 2×6 = 24 + 12 = 36 cm.

Therefore, the required Perimeter is 36 cm.

Learn more about Perimeter here

https://brainly.com/question/9572182

#SPJ1

The length of IKE is 2x - 12.

A condition on a variable that is true for just one value of the variable is called an equation.

Since KITE is a kite, we know that KT = IT and KE = IE. Let's call the length of these diagonals d. Then we have:

KT + TI = d

KE + EI = d

Substituting in the given values, we get:

x + 6 + 2x = d

2x + IE = d

Solving for d in the first equation, we get:

3x + 6 = d

Substituting this into the second equation, we get:

2x + IE = 3x + 6

Solving for IE, we get:

IE = x + 6

Therefore, IKE is equal to:

IKE = IT - IE

IKE = (d - KT) - (x + 6)

IKE = (3x + 6 - x - 6) - (x + 6)

IKE = 2x - 12

So, the length of IKE is 2x - 12.

Learn more about equation on:

https://brainly.com/question/27893282

#SPJ4

The solution set of the trigonometric equation is x = 60° or x = 180°

A trigonometric equation is an equation that contains trigonometric ratios

Given the trigonometric equation sin(x/2) = cosx, we desire to find the solution set. We proceed as follows.

Using the half angle formula for sine, we have that

Sin(x/2) = √[(1 - cosx)/2]

So, substituting this into the equation, we have that

sin(x/2) = cosx,

√[(1 - cosx)/2] = cosx

Squaring both sides, we have that

√[(1 - cosx)/2]² = (cosx)²

(1 - cosx)/2 = cos²x

1 - cosx = 2cos²x

Re-arranging the equation, we have that

2cos²x + cos - 1 = 0

Let cosx = y

So,we have that

2y² + y - 1 = 0

Factorizing, we have

2y² + 2y - y - 1 = 0

2y(y + 1) - (y + 1) = 0

(2y - 1)(y + 1) = 0

⇒ 2y - 1 = 0 or y + 1 = 0

⇒ 2y = 1 or y = -1

⇒ y = 1/2 or y = -1

Since cosx = y, we have that

cosx = 1/2 or cosx = -1

Taking innverse cosine of both sides, we have that

x = cos⁻¹(1/2) or x = cos⁻¹(-1)

x = 60° or x = 180°

So, the solution set is x = 60° or x = 180°

Learn more about trigonometric equation here:

https://brainly.com/question/28025415

#SPJ1

Answer:

X = -10

Step-by-step explanation:

work is in picture.

Hope this helps! Pls give brainliest!

The value of a is -5 after Fiona divided 3x² + 5x - 3 by 3x+2.

To find the value of a, we need to perform a polynomial division of 3x² + 5x - 3 by 3x + 2. The result of the division is a polynomial plus a remainder, which should be equal to ax + b for some constants a and b. The constant b represents the remainder over the divisor, so we can set the expression equal to b to find its value. When dividing 3x² + 5x - 3 by 3x + 2 using polynomial long division, we get:

            x                

3x + 2 | 3x² + 5x - 3

            - 3x² - 2x    

             3x - 3

            3x + 2        

                -5

Therefore, the remainder is -5, which is represented by the expression a = -5.

Learn more about Division:

https://brainly.com/question/25289437

#SPJ4

According to the given information, the series Σ(sin(1/n)) diverges.

What is the convergence and divergence of the sequence?

Convergence: A sequence approaches a fixed number as the number of terms increases.

Divergence: A sequence does not approach a fixed number as the number of terms increases.

We have:

aₙ = sin(1/n)

bₙ = 1/n

Note that both aₙ and bₙ are positive for n > 0.

We will use the limit comparison test to determine if the series converges or diverges. To do this, we will compare the given series to a known series whose convergence or divergence is already known. We will choose the series Σ(1/n) as our comparison series since it is a p-series with p = 1, which is known to diverge.

Taking the limit as n approaches infinity of aₙ/bₙ, we get:

lim n→∞ (sin(1/n)/(1/n))

We can evaluate this limit using L'Hopital's rule:

lim n→∞ (cos(1/n) * (-1/n²)) / (-1/n²)

= lim n→∞ cos(1/n)

Since the cosine function is continuous, we can substitute the limit as m = 1/n:

lim m→0 cos(m)

cos(m) is continuous at m=0, and cos(0) = 1, so

lim m→0 cos(m) = 1

Since the limit of aₙ/bₙ is a finite, positive value, we conclude that the series Σaₙ and the series Σbₙ have the same behavior; that is, either they both converge or they both diverge. Since the series Σbₙ diverges, the series Σaₙ also diverges.

Therefore, the series Σ(sin(1/n)) diverges.

To know  more about convergent and divergent sequence visit:

brainly.com/question/15415793

#SPJ4

The circumcenter of a right triangle will lie on the hypotenuse of the triangle.

The circumcenter is the point at which the perpendicular bisectors of the sides of a triangle intersect. In a right triangle, the perpendicular bisectors of the legs intersect at the midpoint of the hypotenuse. This point is equidistant from all three vertices of the right triangle and is the circumcenter of the triangle.

Since the midpoint of the hypotenuse lies on the hypotenuse itself, the circumcenter of a right triangle must also lie on the hypotenuse. In fact, the circumcenter of a right triangle coincides with the midpoint of the hypotenuse. This is a unique feature of right triangles, and it can be used to find the circumcenter and other important properties of these triangles.

Learn more about hypotenuse

https://brainly.com/question/29407794

#SPJ4

Answer: 0.648

Step-by-step explanation:

We can use the formula P(B|A) = P(A and B) / P(A) to find P(A and B), where P(A and B) is the probability of both A and B occurring and P(A) is the probability of A occurring.

Rearranging the formula, we get:

P(A and B) = P(B|A) * P(A)

Substituting the given values, we get:

P(A and B) = 0.8 * 0.81 = 0.648

Therefore, the value of P(A and B) is 0.648, rounded to the nearest thousandth.

Systems (i) and (ii) are linear, while systems (iii) and (iv) are nonlinear.

A linear system satisfies the properties of superposition and homogeneity, meaning that if the input is scaled or if multiple inputs are added together, the output will also be scaled or added together accordingly. Systems (i) and (ii) are both linear since they both satisfy these properties. However, systems (iii) and (iv) are nonlinear since they do not satisfy the properties of superposition and homogeneity. System (iii) contains a non-linear term (y(t))^2 and system (iv) contains a non-linear term (u(t))^2.

The determination of whether a system is linear or nonlinear can have important implications for the analysis and control of the system. It is important to recognize the differences between these types of systems in order to effectively model and manipulate them.

To know more about linear system visit:

https://brainly.com/question/21404414

#SPJ11

The standard parametric equations for the line passing through points P and Q is [tex]$\begin{cases} x = -6 + 2t \ y = 8 - 7t \ z = 1 + 2t \end{cases}$[/tex] .

To find the standard parametric equations for the line passing through points P(-6, 8, 1) and Q(-4, 1, 3), we first need to find the direction vector of the line. This can be done by subtracting the coordinates of point P from the coordinates of point Q:

[tex]$\vec{PQ} = \begin{pmatrix}-4 \ 1 \ 3\end{pmatrix} - \begin{pmatrix}-6 \ 8 \ 1\end{pmatrix} = \begin{pmatrix}2 \ -7 \ 2\end{pmatrix}$[/tex]

Now we can write the parametric equations in the form:

[tex]$\begin{cases} x = x_0 + at \ y = y_0 + bt \ z = z_0 + ct \end{cases}$[/tex]

where (x0, y0, z0) is a point on the line and (a, b, c) is the direction vector.

We can choose either point P or Q as the point on the line. Let's use point P. So we have:

[tex]$\begin{cases} x = -6 + 2t \ y = 8 - 7t \ z = 1 + 2t \end{cases}$[/tex]

These are the standard parametric equations for the line passing through points P and Q.

To know more about Parametric equation visit:

https://brainly.com/question/10254343

#SPJ4

The average gradient for the stream segment is calculated as the change in elevation divided by the horizontal distance:

gradient = (change in elevation) / (horizontal distance)

The change in elevation is the difference between the starting elevation (550 feet) and the ending elevation (100 feet):

change in elevation = 550 ft - 100 ft = 450 ft

The horizontal distance is given as 100 miles:

horizontal distance = 100 miles

Therefore, the average gradient is:

gradient = (450 ft) / (100 miles) = 4.5 ft/mile

So the answer is (c) 4.5 ft/mile.

Learn more about Gradient here:- brainly.com/question/21727173

#SPJ11

The measure of the largest angle (angle C) is approximately 87 degrees. So, correct option is A.

To find the value of x, we can use the Pythagorean theorem:

BC² = AB² + AC²

Substituting the given values, we get:

23² = 16² + AC²

529 = 256 + AC²

AC² = 273

AC = √273

Now, we can use the Law of Cosines to find the largest angle, which is opposite to the longest side (BC):

cos(C) = (a² + b² - c²) / 2ab

where a, b, and c are the lengths of the sides opposite to angles A, B, and C, respectively.

Substituting the given values, we get:

cos(C) = (16² + AC² - 23²) / 2(16)(AC)

cos(C) = (256 + 273 - 529) / (32√273)

cos(C) = 0.0838

C = cos⁻¹(0.0838)

C ≈ 87 degrees

Therefore, correct option is A.

To learn more about angle click on,

https://brainly.com/question/14400327

#SPJ1

These prompts range from Similarity of triangles to similarity of angles, and transformations here are their answers.

6) ΔADE is similar to Δ ABC on the basis of proportionality.

AB/AC = AD/AE

4/8 = 2/4

1/2 = 1/2

hence on the bases on similar ratios, they are proportional.

7) ABCD transforms to EFGH on the bases of Option C.

8) the following statements about th parallel lines are true:
m∠2=m∠6

m∠1+m∠6 = 180°
x= 120°

If place the spape ABCD on the origin and rotate 180°, them move down ward the axis by 2 units to (0, -4) and two units to the right to (4, -4) you will get the result on the screen hence, the correct answer is Option C.

9) m∠1 = 35°, m∠2=30° (Option B)

Look closely, you would see that there is an angle on a straight line = 115°.

for the triangle of left it shares a co-linear angle with 115° lets call it x

So 80 + m∠1 + x = 180°
since x = 180-115 (angles on straight line) = 65°

Then

80 + m∠1 + 65 = 180

so m∠1= 180-80-65

m∠1 =35°

Using the same approach, we arrive at m∠2 =30°

Hence option B is the right answer.

10)  

(4x+7)  = (5x-10)  by virture of opposite angles.

Thus, (4x+7)  = (5x-10); after collecting like terms we have

⇒ 7+10 = 5x-4x
17= x

or x = 17
so: substituting x into the above expressions, we have

(4(17)+7) = 68 + 7 = 75°

75°

(5x-10) = 5(17) -10 = 85 -10 = 75°

Thus,  (4x+7)  = (5x-10) and are truly opposite angles.

Using x lets test to see if

(3x)° and (4x-14)° are alternate angle.

if they are, the should be equal.

Thus

3x = 3*17 = 51°
4x-14 = 4(17) -14 = 54°

Hence (3x)° ≠ (4x-14)°

Learn more about transformations:
https://brainly.com/question/13801312
#SPJ1

The original fraction is 5/2

A fraction can be defined as the part of a whole number, element or variable.

The different types of fractions are;

From the information given, we have that;

Let the numerator be x = 3x

x/3x - 2

. If 2 is added to the numerator and to the denominator

Then, we have;

x + 2/3x = 3/5

cross multiply the values, we get;

5(x + 2) = 3x(3)

expand the bracket

5x + 10 = 9x

collect the like terms

-4x = -10

Make 'x' the subject of formula

x = 5/2

Learn about fractions at: https://brainly.com/question/11562149

#SPJ4